Recycling Passport – Dismantling Instructions2.3 Pneumatics unit 2.3.1 Pressure sensor circuit board - 0.1 kg • Detach the base panel of the Babylog8000 (2 screws at bottom front,

Recycling Pass Product: Babylog 8000 Date: 24.05.05

1

Recycling Passport – Dismantling Instructions

Babylog8000

1 DEVICE OVERVIEW 2

2 COMPONENTS SUBJECT TO SPECIAL TREATMENT 3

2.1 Display unit 3 2.1.1 Front circuit board, incl. converter circuit board - 0,3 kg 3 2.1.2 Potentiometer panel circuit board - 0.3 kg 3 2.1.3 EL display, including display field – 0.3 kg 3

2.2 Electronics unit 4 2.2.1 5 electronics circuit boards -1.2 kg 4 2.2.2 Front adapter circuit board - 0.1 kg 4 2.2.3 Power supply unit with power lead - 2kg 5 2.2.4 Motherboard - 0.2 kg 5 2.2.5 Interface circuit board - 0.1 kg 5 2.2.6 Battery for power-failure alarm 5

2.3 Pneumatics unit 6 2.3.1 Pressure sensor circuit board - 0.1 kg 6 2.3.2 Pneumatics circuit board - 0.2 kg 6 2.3.3 Oxygen sensor 6 2.3.4 O2-booster circuit board - 0.1 kg 6

3 MAIN COMPONENTS WITH RECYCLING POTENTIAL 7

3.1 Housing panels (0.3 kg - aluminium) 7

3.2 Display frame (0.4 kg - aluminium) 7

3.3 Control panel flap (0.1 kg - Luran S) 7

3.4 Frame (2.6 kg - aluminium) 7


2

4 MAIN COMPONENTS WHICH COULD INTERFERE WITH THE RECYCLING

PROCESS 8

4.1 Expiration block (0.5 kg - aluminium / various plastics) 8

4.2 Gas inlet block (1.4 kg - aluminium / brass / various plastics) 8

4.3 PEEP valve (0.7 kg - aluminium / steel) 8

4.4 Valve block (1.2 kg - brass / aluminium) 8

4.5 Inspiration block (0.7 kg - aluminium / brass / silicone) 8

4.6 Fan (0.1 kg - steel / various plastics) 8

5 MATERIAL / QUANTITIES 9

1 Device overview

• Display unit

• Electronics unit

• Pneumatics unit

•


3

2 Components subject to special treatment

2.1 Display unit

• Unscrew the screw to the right of the display and open the display.

If required, remove the hinges and remove the display.

• Detach the cable connection to the front adapter circuit board

• Detach the remaining cable connections on the display unit

2.1.1 Front circuit board, incl.

converter circuit board - 0,3 kg

• Unscrew 4 screws

2.1.2 Potentiometer panel circuit

board - 0.3 kg

• Unscrew 4 screws under front of

circuit board

2.1.3 EL display, including display

field – 0.3 kg



4

2.2 Electronics unit

• Remove the fan cover at top back

of the device

• Remove the housing cover

(2 screws)

• Remove both housing side panels

(4 plastic screws each)

2.2.1 5 electronics circuit boards -

1.2 kg

• Lift the red lever, remove the

circuit boards

2.2.2 Front adapter circuit board -

0.1 kg



5

2.2.3 Power supply unit with power lead - 2kg

• Remove the upper rear strut of the

steel frame (2 screws on right and

left); push the two housing side

panels apart for this purpose.

Detach the connection cable and

grounding cable

• Unscrew 4 side fastening screws

of the power supply unit (the

lower screws are positioned

slightly further inside)

• Remove the power supply unit

2.2.4 Motherboard - 0.2 kg

• Unscrew 6 screws on base panel

2.2.5 Interface circuit board - 0.1 kg

• Back of device

2.2.6 Battery for power-failure

alarm

• Detach the loudspeaker cover

(2 screws on back of device)

• Detach the cable connection to

the loudspeaker, lay aside the

cover

• Remove 2 screws from the battery

holder

• Remove the battery


6

2.3 Pneumatics unit

2.3.1 Pressure sensor circuit board -

0.1 kg

• Detach the base panel of the

Babylog8000 (2 screws at bottom

front, 2 screws at bottom back)

• Unscrew 3 screws on circuit

board at angle brackets

2.3.2 Pneumatics circuit board -

0.2 kg

• Remove the side aluminium

frame (4 screws)

• Remove the bottom rear frame

brace (2 screws on each side)

• Unscrew 4 screws on pneumatics-

analogue circuit board and one

screw on the pneumatics-

actuation circuit board.

2.3.3 Oxygen sensor

• Unscrew 2 screws at the plastic

cap, remove the cap and remove

the oxygen sensor.

2.3.4 O2-booster circuit board -

0.1 kg

• Unscrew 2 screws on the cap

from the inside.


7

3 Main components with recycling potential

3.1 Housing panels (0.3 kg - aluminium)

• Fan cover lid, 2x side panels, base

3.2 Display frame (0.4 kg - aluminium)

3.3 Control panel flap (0.1 kg - Luran S)

• Unscrew 2 side allen screws

3.4 Frame (2.6 kg - aluminium)


8

4 Main components which could interfere with the recycling process

4.1 Expiration block (0.5 kg - aluminium / various plastics)

4.2 Gas inlet block (1.4 kg - aluminium / brass / various plastics)

4.3 PEEP valve (0.7 kg - aluminium / steel)

4.4 Valve block (1.2 kg - brass / aluminium)

4.5 Inspiration block (0.7 kg - aluminium / brass / silicone)

4.6 Fan (0.1 kg - steel / various plastics)


9

5 Material / quantities

Material

recycling properties

Weight

(kg)

Parts / modules / instructions

Parts which can be disposed of in the normal manner Metals

Aluminium

Sheet 1.2 + 0.5 Housing panels, shielding panel

Block 2 + 1.1 + 0.4 Electronics frame, pneumatics, display

Steel

Sheet

Block

Total metal 5.2

Plastics

Luran S ASA 0.1 Display flap

Silicone <0.1 Pneumatic hoses

Other plastics

Total plastic 0.2

Other Cables <0.1

Packaging

Cardboard 2.5

Plastic 0.1

Total packaging 2.6

Parts which must be removed and disposed of as special waste

Batteries

Alkaline

Lithium 1 off CPU board

Batteries (NiCd) 1 off Power failure alarm – battery (9V)

EL display 0.3 Display unit

Power supply unit + power lead 2

Printed circuit boards Area

(cm2)

Weight

(kg)

Power boards In power supply unit

Logic boards 2321 2.3 Incl. EL display

Back panels 414 0.3 Motherboard

Oxygen sensor 1 off Electro-chemical oxygen measurement

Total parts for disposal 4.6


10

Parts which could interfere with the recycling process

Composites Metal / metal (define)

Valve block 1.2 Aluminium / brass

PEEP valve 0.7 Aluminium / steel

Metal / plastic (define)

Inspiration block 0.7 Aluminium / brass / silicone

Gas inlet block 1.4 Al / metal / various plastics

Expiration block 0.5 Aluminium / various plastics

Total parts which interfere with recycl.

process

4.5

Total weight Product 14.5

Packaging 2.6

Recycling Passport – Dismantling Instructions2.3 Pneumatics unit 2.3.1 Pressure sensor circuit board - 0.1 kg • Detach the base panel of the Babylog8000 (2 screws at bottom front,

Documents

Recycling Passport – Dismantling Instructions2.3 Pneumatics unit 2.3.1 Pressure sensor circuit board - 0.1 kg • Detach the base panel of the Babylog8000 (2 screws at bottom front,