RE 60
www.RIDGID.eu
ELECTRICAL TOOL
Benefits• Cut wire, crimp lugs and
punch boxes with just one tool via the unique RIDGID QuickChange System™
• Eliminates trips back and forth to the truck searching for different tools
• 3-in-1 tool saves valuable cargo space and comes in a single, easy-to-carry case
• In-line design for easy, one-’handed operation’
• 360° head rotation increases maneuverability
• Industry-leading service interval maximizes uptime on the job site
Introducing the World’s Most Versatile Electrical Tool, Featuring the Innovative 3-in-1 RIDGID® QuickChange System™
Cut
Crimp Punch
Ordering Information
Featuring the RIDGID QuickChange System™
Catalog N°
DescriptionWeight
kg
43633 RE 60 Electrical Tool Kit w/SC-60B Scissor Cutter, LR-60B Latching Round Crimp Head and PH-60B Punch Head
13,5
43628 RE 60 Electrical Tool Kit w/SC-60B Scissor Cutter Head and LR-60B Latching Round Crimp Head
11,7
43613 RE 60 Electrical Tool Kit w/LR-60B Latching Round Crimp Head 1043618 RE 60 Electrical Tool Kit w/SC-60B Scissor Cutter Head 1043623 RE 60 Electrical Tool Kit w/PH-60B Punch Head 9,547773 RE 60 Electrical Tool Case Only 4.347753 LR-60B Latching Round Crimp Head Only 1,547758 LS-60B Latching Square Crimp Head Only 1,547763 PH-60B Knockout Punch Head Only 1,647778 SC-60B Scissor Cutter Head w/Blade for Cu/Alu Cable 2,247088 Interchangeable Blade for Copper/Aluminum Cable 0,147093 Interchangeable Blade for Copper Fine Stranded Wire 0,143323 18 V Advanced Lithium 2.0 A Battery 0,543328 18 V Advanced Lithium 4.0 A Battery 0,743333 230 V Advanced Lithium Battery Charger 0,8
ELECTRICAL TOOLS
Specifications• 6-ton (60 kN) hydraulic force output to cut armored cable up to 50 mm O.D.,
crimp Cu/Alu lugs up to 300 mm² and punch round holes up to 63,5 mm• Automatic ram retraction when cutting and crimping• Rubber overmolded grips for superior comfort and control• Bright white LED workspace illumination light• On/Off button for disabling tool when changing heads or transporting• Nylon straps for greater tool security• Approximate Cycle Time: 5 seconds• Service Interval: 32,000 cycles• Weight: 3.2 kgs w/battery• Kit Includes: RE 60 Electrical Tool, 2× 18 V Advanced Lithium 2.0 A batteries, 230 V
Charger and blow-molded case; multiple head configurations available
LR-60B & LS-60B
ELECTRICAL TOOLS
LATCHING ROUND & SQUARE CRIMP HEAD
Crimping Dies for LR-60B and LS-60B Crimp Heads
Benefits• Crimp lugs up to 300 mm² cable w/
LR-60B (up to 185 mm² w/LS-60B)• Slim, ergonomic latching system
allows tool to access tighter spaces• 360° head rotation increases
maneuverability• Combine with other heads in the
RIDGID® QuickChange System™ to maximize efficiency and productivity on the job site
• LR-60B and LS-60B hold respectively round and square shape dies within the capacity range
Round Crimping Dies for crimping DIN 46235 copper lugs and DIN
46267-1 connectors
Round Crimping Dies for crimping standard type copper tubular lugs
and connectors
Round Crimping Dies for crimping DIN type alumium lugs and
connectors
Square Crimping Dies for crimping DIN type aluminium
lugs and connectors
Catalog N°Cross Section
mm2
44173 644178 1044183 1644188 2544193 3544198 5044203 7044208 9544213 12044218 15044223 18544228 24044233 300
Round Dies fit on LR-60B Latching Round Crimp Head
Catalog N°Cross Section
mm2
47933 647938 1047943 1647948 2547953 3547958 5047963 7047968 9547973 12047978 15047983 18547988 24047993 300
Round Crimp Dies fit on LR-60B Latching Round Crimp Head
Catalog N°Cross Section
mm2
44243 16-25
44248 35
44253 50
44258 70
44263 95-120
44268 150
44273 185
44278 240
Round Crimp Dies fit on LR-60B Latching Round Crimp Head
Catalog N°Cross Section
mm2
44288 16-25
44293 35
44298 50
44303 70
44308 95-120
44313 150
44318 185
Square Crimp Dies fit on LS-60B Latching Square Crimp Head
Specifications• Crimp up to 300 mm² (round crimp
head) and 185 mm² (square crimp head) copper and aluminium lugs
• Interchangeable crimp heads are compatible with RE 60 Electrical Tool featuring the QuickChange System™
• Approximate Cycle Time: 5 seconds• Weight Crimping Heads: 1,5 kg• Offering: LR-60B Latching Round
Head available in a RE 60 Tool Kit and can also be purchased separately. LS-60B Latching Square Head only available as standalone
LR-60BCat. No: 47753
LS-60BCat. No: 47758
PH-60BHOLE PUNCHING HEAD
Hole Punching Dies & Accessories
Standalone Hole Punch & Die
Hole Punch SetHole Punching
Accessoires
Catalog N°
Hole Punches for Punching Round Holes through max. 3 mm mild steel plates
44058 Hole Punch ST16 (16,2 mm)44063 Hole Punch ST20/PG13 (20,4 mm)44068 Hole Punch ST25 (25,4 mm)44073 Hole Punch ST32 (32,5 mm)44078 Hole Punch ST40 (40,5 mm)44083 Hole Punch ST50 (50,5 mm)44088 Hole Punch ST63 (63,5 mm)44093 Hole Punch PG16 (22,5 mm)
- Hole Punches up to 25,4 mm require the use of 9.5 mm draw bolt (44098) and 1× Spacer No. 4 included in the Set of Spacers (44108)
- Hole Punches larger than 25,4 mm require the use of 19 mm draw bolt (44103) and Spacer No. 1 and 2 included in the Set of Spacers (44108).
Catalog N°
Accessories
44098 9,5 mm Draw Bolt required for ST16/20/PG13/ST25 punches
44103 19 mm Draw Bolt required for ST32/40/50/63 punches
44108 Set of Spacers required for all Hole Punch sizes
Catalog N°
Hole Punch-Set featuring ST16/20/25/32/40 Hole
Punches and Dies, 3 Spacers, 2 Draw Bolts
44113 Hole Punch-set
Benefits• Effortlessly punch up to 63,5 mm
holes in 3 mm mild steel without burdensome ratcheting or pumping
• 360° head rotation enables maneuverability in tight spaces
• Combine with other heads in the RIDGID QuickChange System™ to maximize efficiency and productivity on the job site
• RIDGID Hole Punch Dies for quick and clean round hole punching without material jamming
Specifications• Capacity: Punches up to 63,5 mm round holes, 92 × 92 mm
square holes, 46 × 92 mm rectangular holes in max. 3 mm mild steel
• Compatible with punch dies from RIDGID® and other manufacturers (sold separately)
• Interchangeable head is compatible with RE 60 Electrical Tool Kit featuring the RIDGID QuickChange System™
• Approximate Cycle Time: 5 seconds• Weight: 1,60 kg• Includes: PH-60B Punch Head and instruction sheet;
available as standalone head or in a RE 60 Electrical Tool Kit
PH-60BCat. No: 47763
SC-60B
1. 2. 3. 4.
SCISSOR CUTTER HEAD
Benefits• Interchangeable blades
adapt single head and tool to cut different types of cable
• 360° head rotation enables maneuverability in tight spaces
• Combine with other heads in the RIDGID QuickChange System™ to maximize efficiency and productivity on the job site
Specifications• Capacity and Material: Interchangeable blades available for
50 mm O.D. armored copper and aluminium building wire, 50 mm O.D. armored fine stranded copper wire
• Interchangeable head is compatible with 60 kN RIDGID Electrical Tools featuring the RIDGID QuickChange System™
• Made from a high-strength steel alloy to increase durability and lifespan of scissor cutter blades and interchangeable head
• Approximate Cycle Time: 5 seconds• Weight: 2,2 kg• Offering: SC-60B Scissor Cutter Head with blades for armored
copper and aluminium building wire and instruction sheet; available as stand-alone head or in a RE-60 Electrical Tool Kit
• Optional: blades for Fine Stranded Copper Wire
Catalog N°
Description
47088 Interchangeable Blade Set for Copper/Aluminum Cable
47093 Interchangeable Blade Set for Copper Fine Stranded Wire
Interchangeable Blade Sets
How the RIDGID® QuickChange System™ Works
Select the appropriate interchangeable head for the job.
Insert the head until you hear a click confirming the connection.
Complete the job–cut, crimp or punch.
Remove the head by pulling a movable collar toward the base of the tool.
FY14
15T
A_EN
Ridge Tool EuropeInterleuvenlaan 503001 LeuvenBelgium
Tel.: +32 (0)16 380 280Fax: +32 (0)16 380 [email protected]
SC-60BCat. No: 47778
www.eriks.nl
AlkmaarSaffierstraat 31812 RM Alkmaar T (072) 514 17 17F (072) 514 16 25E [email protected]
AlmeloPlesmanweg 127602 PE AlmeloT (0546) 87 30 70 F (0546) 87 32 68 E [email protected]
AmsterdamDynamostraat 461014 BK Amsterdam-WestpoortT (020) 448 96 10 F (020) 613 77 65 E [email protected]
ArnhemPieter Calandweg 466827 BK Arnhem T (026) 362 92 44F (026) 361 00 63E [email protected]
Bergen op Zoom Van Konijnenburgweg 44 b4612 PL Bergen op Zoom T (0164) 27 55 44F (0164) 27 55 49E [email protected]
Delfzijl Deltaweg 309936 HK FarmsumT (0596) 63 38 20F (0596) 63 38 29E [email protected]
Den Haag / Marofra Neckar 2 2491 BD Den Haag T (070) 381 84 84F (070) 381 84 36E [email protected]
EdeGalvanistraat 346716 AE EdeT (0318) 43 96 14F (0318) 64 01 04E [email protected]
EerbeekLoubergweg 196961 EJ EerbeekT (0313) 67 95 00F (0313) 65 47 68E [email protected]
EindhovenIndustrieweg 155627 BS EindhovenT (040) 291 19 00F (040) 291 19 09E [email protected]
EmmenWillem Schoutenstraat 11 b7825 VV EmmenT (0591) 66 80 00F (0591) 66 80 06E [email protected]
HengeloHassinkweg 16 7556 BV HengeloT (074) 291 57 57F (074) 291 59 39E [email protected]
HoornDe Factorij 35 d1689 AK ZwaagT (0229) 21 28 82F (0229) 21 93 74E [email protected]
GoudaMarconistraat 1172809 PG GoudaT (0182) 33 11 60F (0182) 37 82 02E [email protected]
GroningenRouaanstraat 89723 CD GroningenT (050) 368 49 99F (050) 368 49 98E [email protected]
LeeuwardenJames Wattstraat 19 8912 AS LeeuwardenT (058) 215 05 87F (058) 215 85 16E [email protected]
MaastrichtAmerikalaan 286199 AE Maastricht-AirportT (043) 604 91 80F (043) 363 87 28E [email protected] RijnmondShannonweg 33, Haven 50793197 LG Rotterdam-BotlekT (010) 231 34 00F (010) 296 96 18E [email protected]
RoermondAda Byronweg 116045 GM RoermondT (0475) 37 22 70F (0475) 37 23 05E [email protected]
TerneuzenCommunicatielaan 27 b4538 BV TerneuzenT (0115) 64 10 00F (0115) 64 10 09E [email protected]
ZwolleAmpèrestraat 278013 PT ZwolleT (038) 467 29 20F (038) 467 29 29E [email protected]
ERIKS Servicecenters
RotterdamSevillaweg 753047 AL RotterdamT (010) 245 50 00F (010) 262 06 22E [email protected]
ERIKS hoofdvestigingGereedschappen
