Reading Technologies, Inc.Compressed Air Specialists
1031F MacArthur Road Reading, PA 19605
(800) 521-9200www.driair.com
One Year WarrantyCall (800) 521-9200
Choosing the Right RTi Filter.................Application & Part Number Guide ..........Eliminex High Flow Separators...............Eliminex High Flow Combo Units ...........Eliminizer Filter/Dryers ......................Eliminizer Filter/Dryer Combo Units .......Coalescers ....................................Oil-Extractors .................................Oil Extractor Combo Units ...................Desiccant Dryers .............................Food Grade Units .............................Stainless Steel Units .........................High Pressure Units ..........................Refrigerated Dryers ..........................Regulators ....................................Lubricators ....................................Drains & Accessories ........................Replacement Elements ......................
ab181417202729313338424546495052
Table of Contents
Eliminex® Description: RTi patented inverse flow filter-dryer with all stainless steel mesh filter packing, excellent water and dirt capture to 3 microns. Port Size Range: 1/2” NPT to 6” ASA (150#) Flange Flow Range: 60 scfm to 5500 scfm @ 100 PSI Applications: Generally used in main lines and in heavy duty service where heavy water removal is needed. Also good for outdoor service where freezing temperatures can be encountered.
Eliminex® Combo Description: (2) stage assembly which adds a high efficiency 0.01 micron Coalescer behind an Eliminex® to give superior oil and fine particulate capture, in addition to the heavy water removal. 99.99998% efficient at .01 micron Port Size Range: 1/2” NPT to 6” ASA (150#) Flange Flow Range: 60 scfm to 3000 scfm @ 100 PSI Applications: Generally used in main lines and in heavy duty service where heavy water, dirt & oil removal is needed.
Eliminizer® Description: RTi patented inverse flow filter-dryer with (2) stage filter packing, stainless steel mesh backed by cotton/polyester mesh packing. Excellent water and dirt capture to 1 micron. Port Size Range: 1/4” NPT to 1” NPT Flow Range: 20 scfm to 150 scfm @ 100 PSI Applications: Generally used at point of use and in heavy duty service where heavy water & dirt removal is needed.
Eliminizer® Combo Description: (2) stage assembly which adds a high efficiency 0.01 micron Coalescer behind an Eliminizer® to give superior oil and fine particulate capture, in addition to the heavy water removal. 99.99998% efficient at .01 micron. Port Size Range: 1/4” NPT to 1” NPT Flow Range: 20 scfm to 150 scfm @ 100 PSI Applications: Generally used at point of use and in heavy duty service where heavy water, dirt and oil removal is needed.
Coalescer Description: High efficiency 0.01 micron Coalescer, 99.99998% efficient at .01 micron, with anti-re-entrainment layer for low oil carryover Port Size Range: 1/4” NPT to 6” ASA (150#) Flange Flow Range: 20 scfm to 3000 scfm @ 100 PSI Applications: Generally used in mainlines or at point of use, where oil and/or fine particulate capture is required and where water is not present in any appreciable quantity.
Oil Extractor® Description: RTi patented inverse flow filter-dryer with (4) stage filter packing, including an activated carbon packing backed by a cotton/polyester packing. Excellent water, dirt & oil aerosol capture to 1 micron. Port Size Range: 1/2” NPT to 1” NPT Flow Range: 60 scfm to 150 scfm @ 100 PSI Applications: Generally used at point of use and in heavy duty service where heavy water, dirt & oil removal is needed. Usually used in combination with coalescer (see below) to get the higher efficiency filtration (to .01 micron) to eliminate any carbon migration that may occur.
Oil Extractor® Combo Description: (2) stage assembly which adds a high efficiency 0.01 micron Coalescer behind an Oil Extractor® to give the best oil and fine particulate capture, in addition to the heavy water removal. 99.99998% efficient at .01 micron and to .003 ppm Port Size Range: 1/2” NPT to 1” ASA (150#) Flange Flow Range: 60 scfm to 150 scfm @ 100 PSI Applications: Generally used at point of use where heavy water, dirt, oil & oil aerosol removal is needed such as direct or indirect food contact applications, spraying applications, video jet applications, etc.
Choosing the Right RTi Filter: An Overview of Product Lines
a
Water & Dirt (High SCFM)...........................Oil.................................................................Water, Dirt & Oil (High SCFM).....................Water & Dirt.................................................Water, Dirt, & Oil..........................................Water, Dirt, Odor & Light Oil.......................Water, Dirt, Odor & Heavy Oil.....................Water Vapor to 35 to 39°F Dew Point.......Water, Water Vapor, Dirt -40°F Dew PointPrecise Air Regulation.................................Consistent Lubrication................................FDA Specified Housings..............................316 Stainless Steel Housings....................High Air Pressure/Natural Gas Units..........
Solution Problem/Specification
Eliminex High Flow SeparatorCoalescers
Eliminex High Flow Combo Units Eliminizer Filter/Dryers
Eliminizer Filter/Dryer Combo Units Oil-Extractors
Oil Extractor Combo UnitsRefrigerated Dryers
Desiccant Dryers RegulatorsLubricators
Food Grade UnitsStainless Steel UnitsHigh Pressure Units
Page
Application Guide
12081417272945314649333842
(800) 521-9200 PDF available www.driair.com
*Not all models available in every size, consult factory for details
b
(800) 521-9200 PDF available www.driair.com 1
60 scfm Eliminex®
Description Part Number
Replacement Element 1P-060Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N32-95-205Bowl Assy: Metal Bowl & Auto Float Drain N34-95-201Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-163Bowl Assy: Poly Bowl & Auto Float Drain N32-15-164Manual Petcock Drain PC-02Automatic Plastic Float Drain (Metal Bowl) N32-95-979Automatic Brass Float Drain (Poly Bowl) N32-95-978
Bowl O-ring N32-95-257
Port Size Metal Bowl Poly Bowl
Manual BrassPetcock Drain
1/4” 1P-060-M02-P 1P-060-P02-P3/8” 1P-060-M03-P 1P-060-P03-P1/2” 1P-060-M04-P 1P-060-P04-P
AutomaticFloat Drain
1/4” 1P-060-M02-F 1P-060-P02-F3/8” 1P-060-M03-F 1P-060-P03-F1/2” 1P-060-M04-F 1P-060-P04-F
Height (in.)(M/P) Width (in.) Depth (in.)
10 3.8 3.810 3.8 3.810 3.8 3.8
10.5 3.8 3.810.5 3.8 3.810.5 3.8 3.8
WaterDirt
OilOil Vapor
Odor
Port Sizes ¼”, ⅜”, ½”Thread Styles NPT, BSPT, BSPPFlow Capacity 60 scfm @ 100 PSIFilter Capacity 3.0 Micron & largerDifferential Pressure < 1.5 PSID
at rated flowMax Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Max Temp/Pressure:Polycarbonate Bowl
125°F/150 PSIG
Approx. Weight (lb.) 3.5
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
(800) 521-9200 PDF available www.driair.com 2
90 scfm Eliminex®
Port Size Metal Bowl Poly Bowl
Manual BrassPetcock Drain
1/4” 1P-090-M02-P 1P-090-P02-P3/8” 1P-090-M03-P 1P-090-P03-P1/2” 1P-090-M04-P 1P-090-P04-P
AutomaticFloat Drain
1/4” 1P-090-M02-F 1P-090-P02-F3/8” 1P-090-M03-F 1P-090-P03-F1/2” 1P-090-M04-F 1P-090-P04-F
Port Sizes ¼”, ⅜”, ½”Thread Styles NPT, BSPT, BSPPFlow Capacity 90 scfm @ 100 PSIFilter Capacity 3.0 Micron & largerDifferential Pressure < 1.5 PSID
at rated flowMax Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Max Temp/Pressure:Polycarbonate Bowl
125°F/150 PSIG
Approx. Weight (lb.) 6.0
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & Accessories
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
WaterDirt
OilOil Vapor
Odor
Description Part Number
Replacement Element 1P-090Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N34-15-180Bowl Assy: Metal Bowl & Auto Float Drain N34-15-178Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-167Bowl Assy: Poly Bowl & Auto Float Drain N32-15-166Manual Petcock Drain PC-03Automatic Plastic Float Drain (Metal Bowl) N32-95-979Automatic Brass Float Drain (Poly Bowl) N32-95-978
Bowl O-ring N32-95-256
Height (in.)(M/P) Width (in.) Depth (in.)
16.75/14 3.8 3.816.75/14 3.8 3.816.75/14 3.8 3.8
17.5/14.5 3.8 3.817.5/14.5 3.8 3.817.5/14.5 3.8 3.8
(800) 521-9200 PDF available www.driair.com 3
120/150 scfm Eliminex®
Port Size Metal Bowl Poly Bowl
Manual BrassPetcock Drain
1/2” 1P-120-M04-P 1P-120-P04-P3/4” 1P-120-M06-P 1P-120-P06-P
1” 1P-120-M08-P 1P-120-P08-P1/2” 1P-150-M04-P 1P-150-M04-P3/4” 1P-150-M06-P 1P-150-M06-P
1” 1P-150-M08-P 1P-150-M08-P
AutomaticFloat Drain
1/2” 1P-120-M04-F 1P-120-P04-F3/4” 1P-120-M06-F 1P-120-P06-F
1” 1P-120-M08-F 1P-120-P08-F1/2” 1P-150-M04-F 1P-150-P04-F3/4” 1P-150-M06-F 1P-150-P06-F
1” 1P-150-M08-F 1P-150-P08-F
Height (in.)(M/P) Width (in.) Depth (in.)
16.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.6
17.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.6
WaterDirt
OilOil Vapor
Odor
Port Sizes ½”, ¾”, 1”Thread Styles NPT, BSPT, BSPPFlow Capacity 120 scfm @ 100 PSI
150 scmf @ 100 PSIFilter Capacity 3.0 Micron & largerDifferential Pressure < 1.5 PSID
at rated flowMax Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Max Temp/Pressure:Polycarbonate Bowl
125°F/150 PSIG
Approx. Weight (lb.) 6.0
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
Description Part Number
Replacement Element 1P-120/1P-150Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N34-15-180Bowl Assy: Metal Bowl & Auto Float Drain N34-15-178Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-167Bowl Assy: Poly Bowl & Auto Float Drain N32-15-166Manual Petcock Drain PC-03Automatic Plastic Float Drain (Metal Bowl) N32-95-979Automatic Brass Float Drain (Poly Bowl) N32-95-978
Bowl O-ring N32-95-256
(800) 521-9200 PDF available www.driair.com 4
175/250 scfm Eliminex®
Port Size Metal Bowl Poly Bowl
Manual BrassPetcock Drain
1/2” 1P-175-M04-P 1P-175-P04-P3/4” 1P-175-M06-P 1P-175-P06-P
1” 1P-175-M08-P 1P-175-P08-P1/2” 1P-250-M04-P 1P-250-M04-P3/4” 1P-250-M06-P 1P-250-M06-P
1” 1P-250-M08-P 1P-250-M08-P
AutomaticFloat Drain
1/2” 1P-175-M04-F 1P-175-P04-F3/4” 1P-175-M06-F 1P-175-P06-F
1” 1P-175-M08-F 1P-175-P08-F1/2” 1P-250-M04-F 1P-250-P04-F3/4” 1P-250-M06-F 1P-250-P06-F
1” 1P-250-M08-F 1P-250-P08-F
Height (in.)(M/P) Width (in.) Depth (in.)
16.75/15 4.6 4.616.75/15 4.6 4.616.75/15 4.6 4.616.75/15 4.6 4.616.75/15 4.6 4.616.75/15 4.6 4.6
17.5/15.5 4.6 4.617.5/15.5 4.6 4.617.5/15.5 4.6 4.617.5/15.5 4.6 4.617.5/15.5 4.6 4.617.5/15.5 4.6 4.6
WaterDirt
OilOil Vapor
Odor
Port Sizes ½”, ¾”, 1”Thread Styles NPT, BSPT, BSPPFlow Capacity 175 scfm @ 100 PSI
250 scmf @ 100 PSIFilter Capacity 3.0 Micron & largerDifferential Pressure < 1.5 PSID
at rated flowMax Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Max Temp/Pressure:Polycarbonate Bowl
125°F/150 PSIG
Approx. Weight (lb.) 6.0
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
Description Part Number
Replacement Element 1P-175/1P-250Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N34-15-180Bowl Assy: Metal Bowl & Auto Float Drain N34-15-178Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-167Bowl Assy: Poly Bowl & Auto Float Drain N32-15-166Manual Petcock Drain PC-03Automatic Plastic Float Drain (Metal Bowl) N32-95-979Automatic Brass Float Drain (Poly Bowl) N32-95-978
Bowl O-ring N32-95-256
(800) 521-9200 PDF available www.driair.com 5
300/400 scfm Eliminex®
Description Part Number
Replacement Element 1M-300/1M-400Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Manual Drain, Ball Valve BV-051Automatic Float Drain N32-95-XD8Bowl O-ring N32-F35-OR
Port Size Metal Bowl
Manual BrassPetcock Drain
1¼” 1M-300-M10-P1½” 1M-300-M12-P2” 1M-300-M16-P
1¼” 1M-400-M10-P1½” 1M-400-M12-P2” 1M-400-M16-P
Automatic PlasticFloat Drain
1¼” 1M-300-M10-F1½” 1M-300-M12-F1” 1M-300-M16-F
1¼” 1M-400-M10-F1½” 1M-400-M12-F1” 1M-400-M16-F
Height (in.) Width (in.) Depth (in.)
21 7.8 7.821 7.8 7.821 7.8 7.826 8.5 8.526 8.5 8.526 8.5 8.5
26 7.8 7.826 7.8 7.826 7.8 7.833 8.5 8.533 8.5 8.533 8.5 8.5
WaterDirt
OilOil Vapor
Odor
Port Sizes 1¼”, 1½”, 2”Thread Styles NPT, BSPT, BSPPFlow Capacity 300/400 scfm
@ 100 PSIFilter Capacity 3.0 Micron & largerDifferential Pressure < 1.5 PSID
at rated flowMax Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Approx. Weight (lb.) 29.0/30.0
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
(800) 521-9200 PDF available www.driair.com 6
700/1200 scfm Eliminex®
Description Part Number
Replacement Element 1M-700/1M-1200Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Manual Drain, Ball Valve BV-051Automatic Float Drain N32-95-XD8Bowl O-ring (700) N32-F35-ORBowl O-ring (1200) PHC-032
Port Size Metal Bowl
Manual BrassPetcock Drain
1¼” 1M-700-M10-P1½” 1M-700-M12-P2” 1M-700-M16-P3” 1M-1200-M24-P
Automatic PlasticFloat Drain
1¼” 1M-700-M10-F1½” 1M-700-M12-F2” 1M-700-M16-F3” 1M-1200-M24-F
Height (in.) Width (in.) Depth (in.)
21 7.8 7.821 7.8 7.821 7.8 7.8
39.5 8.0 8.0
21 7.8 7.821 7.8 7.821 7.8 7.8
45.6 8.0 8.0
WaterDirt
OilOil Vapor
Odor
Port Sizes 1¼”, 1½”, 2”, 3”Thread Styles NPT, BSPT, BSPPFlow Capacity 700/1200 scfm
@ 100 PSIFilter Capacity 3.0 Micron & largerDifferential Pressure < 1.5 PSID
at rated flowMax Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Approx. Weight (lb.) 32.0/38.0
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
(800) 521-9200 PDF available www.driair.com 7
2500/5500 scfm Eliminex®
Description Part Number
Replacement Element 1X-2500/1X-5500Differential Pressure Indicator N32-P2-DPiManual Drain, Ball Valve BV-051External Float Drain N32-95-XD8
Port Size Metal Bowl
Manual BrassPetcock Drain
3” 1M-2500-MFD-P4” 1M-2500-MFE-P6” 1M-5500-MFF-P
ExternalFloat Drain
3” 1M-2500-MFD-X4” 1M-2500-MFE-X6” 1M-5500-MFF-X
Height (in.) Width (in.) Depth (in.)
41.5 18.5 1841.5 20 1853 20 18
46 18.5 1846 21 1858 24 18
WaterDirt
OilOil Vapor
Odor
Port Sizes 3”, 4”, 6” RFSOThread Styles Raised face 150# Flange
Flow Capacity 2500/5500 scfm @ 100 PSI
Filter Capacity 3.0 Micron & largerDifferential Pressure < 1.5 PSID
at rated flowMax Temp/Pressure:Epoxy Coated Carbon Steel
125°F/150 PSIG
Approx. Weight (lb.)
Indicator included standard with these metal bowl units
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
All 1M-2500 units require a minimum of 25” clearance between bottom of housing and floor for installation.All 1M-5500 units require a minimum of 36” clearance between bottom of housing and floor for installation.
Note:
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
(800) 521-9200 PDF available www.driair.com 8
60 scfm Eliminex® Combo
Description Part Number
Replacement Element, 1st Stage 1P-060Replacement Element, 2nd Stage 3C-060Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N32-95-205Bowl Assy: Metal Bowl & Auto Float Drain N34-95-205Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-163Bowl Assy: Poly Bowl & Auto Float Drain N32-15-164Manual Petcock Drain PC-02Automatic Plastic Float Drain (Metal Bowl) N32-95-979Automatic Brass Float Drain N32-95-978Bowl O-ring N32-95-257
Port Size Metal Bowl Poly Bowl
1/4” 1P-060-M02-DCP 1P-060-P02-DCP3/8” 1P-060-M03-DCP 1P-060-P03-DCP1/2” 1P-060-M04-DCP 1P-060-P04-DCP
1/4” 1P-060-M02-DC 1P-060-P02-DC3/8” 1P-060-M03-DC 1P-060-P03-DC1/2” 1P-060-M04-DC 1P-060-P04-DC
Height (in.)(M/P) Width (in.) Depth (in.)
10 8 3.810 8 3.810 8 3.8
10.5 8 3.810.5 8 3.810.5 8 3.8
WaterDirtOil
Oil VaporOdor
Port Sizes ¼”, ⅜”, ½”Thread Styles NPT, BSPT, BSPPFlow Capacity 60 scfm @ 100 PSIFilter Capacity 0.01 Micron & largerDifferential Pressure < 2.5 PSID
at rated flowMax Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Max Temp/Pressure:Polycarbonate Bowl
125°F/150 PSIG
Approx. Weight (lb.) 7.0
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
(800) 521-9200 PDF available www.driair.com 9
Port Size Metal Bowl Poly Bowl
Manual BrassPetcock Drain
1/2” 1P-090-M04-DCP 1P-090-P04-DCP3/4” 1P-090-M04-DCP 1P-090-P04-DCP
1” 1P-090-M08-DCP 1P-090-P08-DCP1/2” 1P-150-M04-DCP 1P-150-P04-DCP3/4” 1P-150-M06-DCP 1P-150-P06-DCP
1” 1P-150-M08-DCP 1P-150-P08-DCP
AutomaticFloat Drain
1/2” 1P-090-M04-DC 1P-090-P04-DC3/4” 1P-090-M06-DC 1P-090-P06-DC
1” 1P-090-M08-DC 1P-090-P08-DC1/2” 1P-150-M04-DC 1P-150-P04-DC3/4” 1P-150-M06-DC 1P-150-P06-DC
1” 1P-150-M08-DC 1P-150-P08-DC
Height (in.)(M/P) Width (in.) Depth (in.)
18.75/15 10 4.618.75/15 10 4.618.75/15 10 4.618.75/15 10 4.618.75/15 10 4.618.75/15 10 4.6
17.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.6
WaterDirtOil
Oil VaporOdor
Port Sizes ½”, ¾”, 1”Thread Styles NPT, BSPT, BSPPFlow Capacity 90 scfm @ 100 PSI
150 scfm @ 100 PSIFilter Capacity 0.01 Micron & largerDifferential Pressure < 2.5 PSID
at rated flowMax Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Max Temp/Pressure:Polycarbonate Bowl
125°F/150 PSIG
Approx. Weight (lb.) 12.0
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
90/150 scfm Eliminex® Combo
Description Part Number
Replacement Element, 1st Stage 1P-090/1P-150Replacement Element, 2nd Stage 3C-090/3C-150Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N34-15-180Bowl Assy: Metal Bowl & Auto Float Drain N34-15-178Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-167
Bowl Assy: Poly Bowl & Auto Float Drain N32-15-166Manual Petcock Drain PC-03Automatic Plastic Float Drain (Metal Bowl) N32-95-979Automatic Brass Float Drain N32-95-978Bowl O-ring N32-95-256
(800) 521-9200 PDF available www.driair.com 10
175/250 scfm Eliminex® Combo
Port Size Metal Bowl Poly Bowl
Manual BrassPetcock Drain
1/2” 1P-175-M04-DCP 1P-175-P04-DCP3/4” 1P-175-M06-DCP 1P-175-P06-DCP
1” 1P-175-M08-DCP 1P-175-P08-DCP1/2” 1P-250-M04-DCP 1P-250-M04-DCP3/4” 1P-250-M06-DCP 1P-250-M06-DCP
1” 1P-250-M08-DCP 1P-250-M08-DCP
AutomaticFloat Drain
1/2” 1P-175-M04-DC 1P-175-P04-DC3/4” 1P-175-M06-DC 1P-175-P06-DC
1” 1P-175-M08-DC 1P-175-P08-DC1/2” 1P-250-M04-DC 1P-250-P04-DC3/4” 1P-250-M06-DC 1P-250-P06-DC
1” 1P-250-M08-DC 1P-250-P08-DC
Height (in.)(M/P) Width (in.) Depth (in.)
18.75/15 10 4.618.75/15 10 4.618.75/15 10 4.618.75/15 10 4.618.75/15 10 4.618.75/15 10 4.6
17.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.6
Port Sizes ½”, ¾”, 1”Thread Styles NPT, BSPT, BSPPFlow Capacity 175 scfm @ 100 PSI
250 scmf @ 100 PSIFilter Capacity 0.01 Micron & largerDifferential Pressure < 2.5 PSID
at rated flowMax Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Max Temp/Pressure:Polycarbonate Bowl
125°F/150 PSIG
Approx. Weight (lb.) 12.0
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
WaterDirtOil
Oil VaporOdor
Description Part Number
Replacement Element, 1st Stage 1P-175/1P-250Replacement Element, 2nd Stage 3C-175/3C-250Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N34-15-180Bowl Assy: Metal Bowl & Auto Float Drain N34-15-178Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-167Bowl Assy: Poly Bowl & Auto Float Drain N32-15-166Manual Petcock Drain PC-03Automatic Plastic Float Drain (Metal Bowl) N32-95-979Automatic Brass Float Drain N32-95-978Bowl O-ring N32-95-256
(800) 521-9200 PDF available www.driair.com 11
300 /400 scfm Eliminex® Combo
Description Part Number
Replacement Element, 1st Stage 1M-300/1M-400Replacement Element, 2nd Stage 3C-300/3C-400Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Manual Drain, Ball Valve BV-051Automatic Float Drain N32-95-XD8Bowl O-ring N32-F35-OR
Port Size Metal Bowl
Manual BrassPetcock Drain
1¼” 1M-300-M10-DCP1½” 1M-300-M12-DCP2” 1M-300-M16-DCP
1¼” 1M-400-M10-DCP1½” 1M-400-M12-DCP2” 1M-400-M16-DCP
Automatic PlasticFloat Drain
1¼” 1M-300-M10-DC1½” 1M-300-M12-DC1” 1M-300-M16-DC
1¼” 1M-400-M10-DC1½” 1M-400-M12-DC1” 1M-400-M16-DC
Height (in.) Width (in.) Depth (in.)
21 16.5 7.821 16.5 7.821 16.5 7.826 18 8.526 18 8.526 18 8.5
26 16.5 7.826 16.5 7.826 16.5 7.833 18 8.533 18 8.533 18 8.5
Port Sizes 1¼”, 1½”, 2”Thread Styles NPT, BSPT, BSPPFlow Capacity 300/400 scfm
@ 100 PSIFilter Capacity 0.01 Micron & largerDifferential Pressure < 2.5 PSID
at rated flowMax Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Approx. Weight (lb.) 58.0/60.0
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
WaterDirtOil
Oil VaporOdor
(800) 521-9200 PDF available www.driair.com 12
700/1200 scfm Eliminex® Combo
Description Part Number
Replacement Element 1M-700/1M-1200Replacement Element, 2nd Stage 3C-700/3C--1200Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Manual Drain, Ball Valve BV-051Automatic Float Drain N32-95-XD8Bowl O-ring (700) N32-F35-ORBowl O-ring (1200) PHC-032
Port Size Metal Bowl
Manual BrassPetcock Drain
1¼” 1M-700-M10-DCP1½” 1M-700-M12-DCP2” 1M-700-M16-DCP3” 1M-1200-M24-DCP
Automatic PlasticFloat Drain
1¼” 1M-700-M10-DC1½” 1M-700-M12-DC2” 1M-700-M16-DC3” 1M-1200-M24-DC
Height (in.) Width (in.) Depth (in.)
21 16 7.821 16 7.821 16 7.8
39.5 18 8.0
21 16 7.821 16 7.821 16 7.8
45.5 18 8.0
Port Sizes 1¼”, 1½”, 2”, 3”Thread Styles NPT, BSPT, BSPPFlow Capacity 700/1200 scfm
@ 100 PSIFilter Capacity 0.01 Micron & largerDifferential Pressure < 2.5 PSID
at rated flowMax Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Approx. Weight (lb.) 64.0/76.0
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
WaterDirtOil
Oil VaporOdor
(800) 521-9200 PDF available www.driair.com 13
1900/3000 scfm Eliminex® Combo
Description Part Number
Replacement Element 1X-2500/1X-5500Replacement Element 3C-1900/3C-3000Differential Pressure Indicator N32-P2-DPiManual Drain, Ball Valve BV-051External Float Drain N32-95-XD8
Port Size Metal Bowl
Manual BrassPetcock Drain
3” 1M-1900-MFD-DCP4” 1M-1900-MFE-DCP6” 1M-3000-MFF-DCP
ExternalFloat Drain
3” 1M-1900-MFD-DCX4” 1M-1900-MFE-DCX6” 1M-3000-MFF-DCX
Height (in.) Width (in.) Depth (in.)
68.5 47 21
Port Sizes 3”, 4”, 6” RFSOThread Styles Raised face 150# Flange
Flow Capacity 1900/3000 scfm @ 100 PSI
Filter Capacity 0.01 Micron & largerDifferential Pressure < 2.5 PSID
at rated flowMax Temp/Pressure:Epoxy Coated Carbon Steel
125°F/150 PSIG
Approx. Weight (lb.)
Indicator included standard with these metal bowl units
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
All 1900 scfm units require a minimum of 25” clearance between bottom of housing and floor for installation.All 3000 scfm units require a minimum of 36” clearance between bottom of housing and floor for installation.
Note:
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
WaterDirtOil
Oil VaporOdor
(800) 521-9200 PDF available www.driair.com 14
20 scfm Eliminizer®
Port Size Metal Bowl Poly Bowl
Manual BrassPetcock Drain
1/4” 3P-020-M02-P 3P-020-P02-P3/8” 3P-020-M03-P 3P-020-P03-P
AutomaticFloat Drain
1/4” 3P-020-M02-F 3P-020-P02-F3/8” 3P-020-M03-F 3P-020-P03-F
Height (in.)(M/P) Width (in.) Depth (in.)
6.8/6.8 3.0 3.06.8/6.8 3.0 3.0
6.8/6.8 3.0 3.0
6.8/6.8 3.0 3.0
Port Sizes ¼”, ⅜”Thread Styles NPT, BSPT, BSPPFlow Capacity 20 scfm @ 100 PSIFilter Capacity 1.0 Micron & largerDifferential Pressure < 5.0 PSID
at rated flowMax Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Max Temp/Pressure:Polycarbonate Bowl
125°F/150 PSIG
Approx. Weight (lb.) 2.0
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
WaterDirt
OilOil Vapor
Odor
Description Part Number
Replacement Element 3P-020Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N32-95-178Bowl Assy: Metal Bowl & Auto Float Drain N32-95-950Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-159Bowl Assy: Poly Bowl & Auto Float Drain N32-15-160Manual Petcock Drain N32-95-182Automatic Plastic Float Drain (Metal Bowl) N32-95-973Bowl O-ring N32-95-009
(800) 521-9200 PDF available www.driair.com 15
35/60 scfm Eliminizer®
Port Size Metal Bowl Poly Bowl
Manual BrassPetcock Drain
1/4” 3P-035-M02-P 3P-035-P02-P3/8” 3P-035-M03-P 3P-035-P03-P1/2” 3P-035-M04-P 3P-035-P04-P1/4” 3P-060-M02-P 3P-060-P02-P3/8” 3P-060-M03-P 3P-060-P03-P1/2” 3P-060-M04-P 3P-060-P04-P
AutomaticFloat Drain
1/4” 3P-035-M02-F 3P-035-P02-F3/8” 3P-035-M03-F 3P-035-P03-F1/2” 3P-035-M04-F 3P-035-P04-F1/4” 3P-060-M02-F 3P-060-P02-F3/8” 3P-060-M03-F 3P-060-P03-F1/2” 3P-060-M04-F 3P-060-P04-F
Height (in.)(M/P) Width (in.) Depth (in.)
10 3.8 3.810 3.8 3.810 3.8 3.810 3.8 3.810 3.8 3.810 3.8 3.8
10.5 3.8 3.810.5 3.8 3.810.5 3.8 3.810.5 3.8 3.810.5 3.8 3.810.5 3.8 3.8
Port Sizes ¼”, ⅜”, ½”Thread Styles NPT, BSPT, BSPPFlow Capacity 35 scfm @ 100 PSI
60 scfm @ 100 PSIFilter Capacity 1.0 Micron & largerDifferential Pressure < 5.0 PSID
at rated flowMax Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Max Temp/Pressure:Polycarbonate Bowl
125°F/150 PSIG
Approx. Weight (lb.) 3.5
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
WaterDirt
OilOil Vapor
Odor
Description Part Number
Replacement Element 3P-035/3P-060Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N34-95-205Bowl Assy: Metal Bowl & Auto Float Drain N34-95-201Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-163Bowl Assy: Poly Bowl & Auto Float Drain N32-15-164Manual Petcock Drain PC-03Automatic Plastic Float Drain (Metal Bowl) N32-95-979Automatic Brass Float Drain (Poly Bowl) N32-95-978
Bowl O-ring N32-95-257
(800) 521-9200 PDF available www.driair.com 16
90/150 scfm Eliminizer®
Port Size Metal Bowl Poly Bowl
Manual BrassPetcock Drain
1/2” 3P-090-M04-P 3P-090-P04-P3/4” 3P-090-M06-P 3P-090-P06-P
1” 3P-090-M08-P 3P-090-P08-P1/2” 3P-150-M04-P 3P-150-P04-P3/4” 3P-150-M06-P 3P-150-P06-P
1” 3P-150-M08-P 3P-150-P08-P
AutomaticFloat Drain
1/2” 3P-090-M04-F 3P-090-P04-F3/4” 3P-090-M06-F 3P-090-P06-F
1” 3P-090-M08-F 3P-090-P08-F1/2” 3P-150-M04-F 3P-150-P04-F3/4” 3P-150-M06-F 3P-150-P06-F
1” 3P-150-M08-F 3P-150-P08-F
Height (in.)(M/P) Width (in.) Depth (in.)
16.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.6
17.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.6
Port Sizes ½”, ¾”, 1”Thread Styles NPT, BSPT, BSPPFlow Capacity 90 scfm @ 100 PSI
150 scfm @ 100 PSIFilter Capacity 1.0 Micron & largerDifferential Pressure < 5.0 PSID
at rated flowMax Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Max Temp/Pressure:Polycarbonate Bowl
125°F/150 PSIG
Approx. Weight (lb.) 6.0
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
WaterDirt
OilOil Vapor
Odor
Description Part Number
Replacement Element 3P-090/3P-150Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N34-15-180Bowl Assy: Metal Bowl & Auto Float Drain N34-15-178Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-167Bowl Assy: Poly Bowl & Auto Float Drain N32-15-166Manual Petcock Drain PC-03Automatic Plastic Float Drain (Metal Bowl) N32-95-979Automatic Brass Float Drain (Poly Bowl) N32-95-978
Bowl O-ring N32-95-256
(800) 521-9200 PDF available www.driair.com 17
20 scfm Eliminizer® Combo
WaterDirtOil
Oil VaporOdor
Port Sizes ¼”, ⅜”Thread Styles NPT, BSPT, BSPPFlow Capacity 20 scfm @ 100 PSIFilter Capacity 0.01 Micron & largerDifferential Pressure < 5.0 PSID
at rated flowMax Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Max Temp/Pressure:Polycarbonate Bowl
125°F/150 PSIG
Approx. Weight (lb.) 4.0
Replacement Parts & AccessoriesSpecifications
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
Description Part Number
Replacement Element, 1st Stage 3P-020Replacement Element, 2nd Stage 3C-020Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N32-95-178Bowl Assy: Metal Bowl & Auto Float Drain N32-95-950Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-159Bowl Assy: Poly Bowl & Auto Float Drain N32-15-160Manual Petcock Drain N32-95-182Automatic Plastic Float Drain (Metal Bowl) N32-95-973Automatic Brass Float Drain (Poly Bowl) N32-95-973
Bowl O-ring N32-95-009
Port Size Metal Bowl Poly Bowl
Manual BrassPetcock Drain
1/4” 3P-020-M02-DCP 3P-020-P02-DCP
3/8” 3P-020-M03-DCP 3P-020-P03-DCP
AutomaticFloat Drain
1/4” 3P-020-M02-DC 3P-020-P02-DC3/8” 3P-020-M03-DC 3P-020-P03-DC
Height (in.)(M/P) Width (in.) Depth (in.)
6.8 7.0 3.06.8 7.0 3.0
6.8 7.0 3.0
6.8 7.0 3.0
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Physical DimensionsOrder Guide
(800) 521-9200 PDF available www.driair.com 18
35/60 scfm Eliminizer® Combo
Port Size Metal Bowl Poly Bowl
Manual BrassPetcock Drain
1/4” 3P-035-M02-DCP 3P-035-P02-DCP3/8” 3P-035-M03-DCP 3P-035-P03-DCP1/2” 3P-035-M04-DCP 3P-035-P04-DCP1/4” 3P-060-M02-DCP 3P-060-P02-DCP3/8” 3P-060-M03-DCP 3P-060-P03-DCP1/2” 3P-060-M04-DCP 3P-060-P04-DCP
AutomaticFloat Drain
1/4” 3P-035-M02-DC 3P-035-P02-DC
3/8” 3P-035-M03-DC 3P-035-P03-DC1/2” 3P-035-M04-DC 3P-035-P04-DC1/4” 3P-060-M02-DC 3P-060-P02-DC3/8” 3P-060-M03-DC 3P-060-P03-DC1/2” 3P-060-M04-DC 3P-060-P04-DC
Height (in.)(M/P) Width (in.) Depth (in.)
10 8 3.810 8 3.810 8 3.810 8 3.810 8 3.810 8 3.8
10.5 8 3.810.5 8 3.810.5 8 3.810.5 8 3.810.5 8 3.810.5 8 3.8
WaterDirtOil
Oil VaporOdor
Port Sizes ¼”, ⅜”, ½”Thread Styles NPT, BSPT, BSPPFlow Capacity 35 scfm @ 100 PSI
60 scfm @ 100 PSIFilter Capacity 0.01 Micron & largerDifferential Pressure < 5.0 PSID
at rated flowMax Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Max Temp/Pressure:Polycarbonate Bowl
125°F/150 PSIG
Approx. Weight (lb.) 7.0
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
Description Part Number
Replacement Element, 1st Stage 3P-035/3P-060Replacement Element, 2nd Stage 3C-035/3C-060Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N34-95-205Bowl Assy: Metal Bowl & Auto Float Drain N34-95-201Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-163Bowl Assy: Poly Bowl & Auto Float Drain N32-15-164Manual Petcock Drain PC-03Automatic Plastic Float Drain (Metal Bowl) N32-95-979Automatic Brass Float Drain (Poly Bowl) N32-95-978
Bowl O-ring N32-95-257
(800) 521-9200 PDF available www.driair.com 19
90/150 scfm Eliminizer® Combo
Port Size Metal Bowl Poly Bowl
Manual BrassPetcock Drain
1/2” 3P-090-M04-DCP 3P-090-P04-DCP3/4” 3P-090-M04-DCP 3P-090-P04-DCP
1” 3P-090-M08-DCP 3P-090-P08-DCP1/2” 3P-150-M04-DCP 3P-150-P04-DCP3/4” 3P-150-M06-DCP 3P-150-P06-DCP
1” 3P-150-M08-DCP 3P-150-P08-DCP
AutomaticFloat Drain
1/2” 3P-090-M04-DC 3P-090-P04-DC3/4” 3P-090-M06-DC 3P-090-P06-DC
1” 3P-090-M08-DC 3P-090-P08-DC1/2” 3P-150-M04-DC 3P-150-P04-DC3/4” 3P-150-M06-DC 3P-150-P06-DC
1” 3P-150-M08-DC 3P-150-P08-DC
Height (in.)(M/P) Width (in.) Depth (in.)
18.75/15 10 4.618.75/15 10 4.618.75/15 10 4.618.75/15 10 4.618.75/15 10 4.618.75/15 10 4.6
17.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.6
WaterDirtOil
Oil VaporOdor
Port Sizes ½”, ¾”, 1”Thread Styles NPT, BSPT, BSPPFlow Capacity 90 scfm @ 100 PSI
150 scfm @ 100 PSIFilter Capacity 0.01 Micron & largerDifferential Pressure < 5.0 PSID
at rated flowMax Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Max Temp/Pressure:Polycarbonate Bowl
125°F/150 PSIG
Approx. Weight (lb.) 12.0
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
Description Part Number
Replacement Element, 1st Stage 3P-090/3P-150Replacement Element, 2nd Stage 3C-090/3C-150Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N34-15-180Bowl Assy: Metal Bowl & Auto Float Drain N34-15-178Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-167Bowl Assy: Poly Bowl & Auto Float Drain N32-15-166Manual Petcock Drain PC-03Automatic Plastic Float Drain (Metal Bowl) N32-95-979Automatic Brass Float Drain (Poly Bowl) N32-95-978
Bowl O-ring N32-95-256
(800) 521-9200 PDF available www.driair.com 20
20 scfm Coalescer
Port Size Metal Bowl Poly Bowl
Manual BrassPetcock Drain 1/4” 3C-020-M02-P 3C-020-P02-P
AutomaticFloat Drain 1/4” 3C-020-M02-F 3C-020-P02-F
Height (in.)(M/P) Width (in.) Depth (in.)
6.8 3.0 3.0
6.8 3.0 3.0
WaterDirtOil
Oil VaporOdor
Port Sizes ¼”Thread Styles NPT, BSPT, BSPPFlow Capacity 20 scfm @ 100 PSIFilter Capacity 0.01 Micron & largerDifferential Pressure < 1.5 PSID
at rated flowMax Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Max Temp/Pressure:Polycarbonate Bowl
125°F/150 PSIG
Approx. Weight (lb.) 2.0
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
Description Part Number
Replacement Element 3C-020Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N32-95-178Bowl Assy: Metal Bowl & Auto Float Drain N32-95-950Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-159Bowl Assy: Poly Bowl & Auto Float Drain N32-15-160Manual Petcock Drain N32-95-182Automatic Plastic Float Drain (Metal Bowl) N32-95-973Bowl O-ring N32-95-009
(800) 521-9200 PDF available www.driair.com 21
35/60 scfm Coalescer
Port Size Metal Bowl Poly Bowl
Manual BrassPetcock Drain
1/4” 3C-035-M02-P 3C-035-P02-P3/8” 3C-035-M03-P 3C-035-P03-P1/2” 3C-035-M04-P 3C-035-P04-P1/4” 3C-060-M02-P 3C-060-P02-P3/8” 3C-060-M03-P 3C-060-P03-P1/2” 3C-060-M04-P 3C-060-P04-P
AutomaticFloat Drain
1/4” 3C-035-M02-F 3C-035-P02-F3/8” 3C-035-M03-F 3C-035-P03-F1/2” 3C-035-M04-F 3C-035-P04-F1/4” 3C-060-M02-F 3C-060-P02-F3/8” 3C-060-M03-F 3C-060-P03-F1/2” 3C-060-M04-F 3C-060-P04-F
Height (in.)(M/P) Width (in.) Depth (in.)
10 3.8 3.810 3.8 3.810 3.8 3.810 3.8 3.810 3.8 3.810 3.8 3.8
10.5 3.8 3.810.5 3.8 3.810.5 3.8 3.810.5 3.8 3.810.5 3.8 3.810.5 3.8 3.8
Port Sizes ¼”, ⅜”, ½”Thread Styles NPT, BSPT, BSPPFlow Capacity 35 scfm @ 100 PSI
60 scfm @ 100 PSIFilter Capacity 0.01 Micron & largerDifferential Pressure < 1.5 PSID
at rated flowMax Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Max Temp/Pressure:Polycarbonate Bowl
125°F/150 PSIG
Approx. Weight (lb.) 3.5
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
WaterDirtOil
Oil VaporOdor
Description Part Number
Replacement Element 3C-035/3C-060Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N34-95-205Bowl Assy: Metal Bowl & Auto Float Drain N34-95-201Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-163Bowl Assy: Poly Bowl & Auto Float Drain N32-15-164Manual Petcock Drain PC-02Automatic Plastic Float Drain (Metal Bowl) N32-95-979Automatic Brass Float Drain (Poly Bowl) N32-95-978
Bowl O-ring N32-95-257
(800) 521-9200 PDF available www.driair.com 22
90/150 scfm Coalescer
Port Size Metal Bowl Poly Bowl
Manual BrassPetcock Drain
1/2” 3C-090-M04-P 3C-090-P04-P3/4” 3C-090-M06-P 3C-090-P06-P
1” 3C-090-M08-P 3C-090-P08-P1/2” 3C-150-M04-P 3C-150-P04-P3/4” 3C-150-M06-P 3C-150-P06-P
1” 3C-150-M08-P 3C-150-P08-P
Automatic Float Drain
1/2” 3C-090-M04-F 3C-090-P04-F3/4” 3C-090-M06-F 3C-090-P06-F
1” 3C-090-M08-F 3C-090-P08-F1/2” 3C-150-M04-F 3C-150-P04-F3/4” 3C-150-M06-F 3C-150-P06-F
1” 3C-150-M08-F 3C-150-P08-F
Height (in.)(M/P) Width (in.) Depth (in.)
16.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.6
17.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.6
Port Sizes ½”, ¾”, 1”Thread Styles NPT, BSPT, BSPPFlow Capacity 90 scfm @ 100 PSI
150 scfm @ 100 PSIFilter Capacity 0.01 Micron & largerDifferential Pressure < 1.5 PSID
at rated flowMax Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Max Temp/Pressure:Polycarbonate Bowl
125°F/150 PSIG
Approx. Weight (lb.) 6.0
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
WaterDirtOil
Oil VaporOdor
Description Part Number
Replacement Element 3C-090/3C-150Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N34-15-180Bowl Assy: Metal Bowl & Auto Float Drain N34-15-178Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-167Bowl Assy: Poly Bowl & Auto Float Drain N32-15-166Manual Petcock Drain PC-03Automatic Plastic Float Drain (Metal Bowl) N32-95-979Automatic Brass Float Drain (Poly Bowl) N32-95-978
Bowl O-ring N32-95-257
(800) 521-9200 PDF available www.driair.com 23
WaterDirtOil
Oil VaporOdor
Description Part Number
Replacement Element 3C-250Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N34-15-180Bowl Assy: Metal Bowl & Auto Float Drain N34-15-178Manual Petcock Drain PC-03Automatic Float Drain N32-95-979Bowl O-ring N32-95-256
Port Size Metal Bowl
Manual BrassPetcock Drain
½ 3C-250-M04-P¾ 3C-250-M06-P1” 3C-250-M08-P
Automatic PlasticFloat Drain
1¼” 3C-250-M04-F1½” 3C-250-M06-F1” 3C-250-M08-F
Height (in.) Width (in.) Depth (in.)
16.75 4.6 4.616.75 4.6 4.616.75 4.6 4.6
17.5 4.6 4.617.5 4.6 4.617.5 4.6 4.6
Port Sizes ½”, ¾”, 1”Thread Styles NPT, BSPT, BSPPFlow Capacity 250 scfm
@ 100 PSIFilter Capacity 0.01 Micron & largerDifferential Pressure < 1.5 PSID
at rated flowMax Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Approx. Weight (lb.) 6.0
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
WaterDirtOil
Oil VaporOdor
250 scfm Coalescer
(800) 521-9200 PDF available www.driair.com 24
300/400 scfm Coalescer
Description Part Number
Replacement Element 3C-300/3C-400Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Manual Drain, Ball Valve BV-051Automatic Float Drain N32-95-XD8Bowl O-ring N32-F35-OR
Port Size Metal Bowl
Manual BrassPetcock Drain
1¼” 3C-300-M10-P1½” 3C-300-M12-P2” 3C-300-M16-P
1¼” 3C-400-M10-P1½” 3C-400-M12-P2” 3C-400-M16-P
Automatic PlasticFloat Drain
1¼” 3C-300-M10-F1½” 3C-300-M12-F1” 3C-300-M16-F
1¼” 3C-400-M10-F1½” 3C-400-M12-F1” 3C-400-M16-F
Height (in.) Width (in.) Depth (in.)
21 7.8 7.821 7.8 7.821 7.8 7.826 7.8 7.826 7.8 7.826 7.8 7.8
26 7.8 7.826 7.8 7.826 7.8 7.833 7.8 7.833 7.8 7.833 7.8 7.8
Port Sizes 1¼”, 1½”, 2”Thread Styles NPT, BSPT, BSPPFlow Capacity 300/400 scfm
@ 100 PSIFilter Capacity 0.01 Micron & largerDifferential Pressure < 1.5 PSID
at rated flowMax Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Approx. Weight (lb.) 29.0/30.0
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
WaterDirtOil
Oil VaporOdor
(800) 521-9200 PDF available www.driair.com 25
700/1200 scfm Coalescer
Description Part Number
Replacement Element 3C-700/3C-1200Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020
Manual Drain, Ball Valve BV-051Automatic Float Drain N32-95-XD8Bowl O-ring (700) N32-F35-ORBowl O-ring (1200) PHC-032
Port Size Metal Bowl
Manual BrassPetcock Drain
1¼” 3C-700-M10-P1½” 3C-700-M12-P2” 3C-700-M16-P3” 3C-1200-M24-P
Automatic PlasticFloat Drain
1¼” 3C-700-M10-F1½” 3C-700-M12-F2” 3C-700-M16-F3” 3C-1200-M24-F
Height (in.) Width (in.) Depth (in.)
39.5 8.0 8.0
45 8.0 8.0
Port Sizes 1¼”, 1½”, 2”, 3”Thread Styles NPT, BSPT, BSPPFlow Capacity 700/1200 scfm
@ 100 PSIFilter Capacity 0.01 Micron & largerDifferential Pressure < 1.5 PSID
at rated flowMax Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Approx. Weight (lb.) 32.0/38.0
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
WaterDirtOil
Oil VaporOdor
(800) 521-9200 PDF available www.driair.com 26
1900/3000 scfm Coalescer
Description Part Number
Replacement Element 3C-1900/3C-3000Differential Pressure Indicator N32-P2-DPiManual Drain, Ball Valve BV-051External Float Drain N32-95-XD8
Port Size Metal Bowl
Manual BrassPetcock Drain
3” 3C-1900-MFD-P4” 3C-1900-MFE-P6” 3C-3000-MFF-P
ExternalFloat Drain
3” 3C-1900-MFD-X4” 3C-1900-MFE-X6” 3C-3000-MFF-X
Height (in.) Width (in.) Depth (in.)
WaterDirtOil
Oil VaporOdor
Port Sizes 3”, 4”, 6” RFSOThread Styles Raised face 150# Flange
Flow Capacity 1900/3000 scfm @ 100 PSI
Filter Capacity 0.01 Micron & largerDifferential Pressure < 1.5 PSID
at rated flowMax Temp/Pressure:Epoxy Coated Carbon Steel
125°F/150 PSIG
Approx. Weight (lb.)
Indicator included standard with these metal bowl units
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
All 3C-1900 units require a minimum of 25” clearance between bottom of housing and floor for installation.All 3C-3000 units require a minimum of 36” clearance between bottom of housing and floor for installation.
Note:
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
(800) 521-9200 PDF available www.driair.com 27
60 scfm Oil-Extractor
Port Size Metal Bowl Poly Bowl
Manual BrassPetcock Drain
1/4” 4P-060-M02-P 4P-060-P02-P3/8” 4P-060-M03-P 4P-060-P03-P1/2” 4P-060-M04-P 4P-060-P04-P
AutomaticFloat Drain
1/4” 4P-060-M02-F 4P-060-P02-F3/8” 4P-060-M03-F 4P-060-P03-F1/2” 4P-060-M04-F 4P-060-P04-F
Height (in.)(M/P) Width (in.) Depth (in.)
10 3.8 3.810 3.8 3.810 3.8 3.8
10.5 3.8 3.810.5 3.8 3.810.5 3.8 3.8
WaterDirt
Light OilOil Vapor
Odor
Port Sizes ¼”, ⅜”, ½”Thread Styles NPT, BSPT, BSPPFlow Capacity 60 scfm @ 100 PSIFilter Capacity 1.0 Micron & larger
Activated Carbon OilAbsorption to 0.003 ppm
Differential Pressure < 3.0 PSID at rated flow
Max Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Max Temp/Pressure:Polycarbonate Bowl
125°F/150 PSIG
Approx. Weight (lb.) 3.5
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
Description Part Number
Replacement Element 4P-060Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N34-95-205Bowl Assy: Metal Bowl & Auto Float Drain N34-95-201Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-163Bowl Assy: Poly Bowl & Auto Float Drain N32-15-164Manual Petcock Drain PC-03Automatic Plastic Float Drain (Metal Bowl) N32-95-979Automatic Brass Float Drain (Poly Bowl) N32-95-978
Bowl O-ring N32-95-257
(800) 521-9200 PDF available www.driair.com 28
90/150 scfm Oil-Extractor
Port Size Metal Bowl Poly Bowl
Manual BrassPetcock Drain
1/2” 4P-090-M04-P 4P-090-P04-P3/4” 4P-090-M06-P 4P-090-P06-P
1” 4P-090-M08-P 4P-090-P08-P1/2” 4P-150-M04-P 4P-150-P04-P3/4” 4P-150-M06-P 4P-150-P06-P
1” 4P-150-M08-P 4P-150-P08-P
AutomaticFloat Drain
1/2” 4P-090-M04-F 4P-090-P04-F3/4” 4P-090-M06-F 4P-090-P06-F
1” 4P-090-M08-F 4P-090-P08-F1/2” 4P-150-M04-F 4P-150-P04-F3/4” 4P-150-M06-F 4P-150-P06-F
1” 4P-150-M08-F 4P-150-P08-F
Height (in.)(M/P) Width (in.) Depth (in.)
16.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.6
17.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.6
Port Sizes ½”, ¾”, 1”Thread Styles NPT, BSPT, BSPPFlow Capacity 90 scfm @ 100 PSI
150 scfm @ 100 PSIFilter Capacity 1.0 Micron & larger
Activated Carbon OilAbsorption to 0.003 ppm
Differential Pressure < 3.0 PSID at rated flow
Max Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Max Temp/Pressure:Polycarbonate Bowl
125°F/150 PSIG
Approx. Weight (lb.) 6.0
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
WaterDirt
Light OilOil Vapor
Odor
Description Part Number
Replacement Element 4P-090/4P-150Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N34-15-180Bowl Assy: Metal Bowl & Auto Float Drain N34-15-178Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-167Bowl Assy: Poly Bowl & Auto Float Drain N32-15-166Manual Petcock Drain PC-03Automatic Plastic Float Drain (Metal Bowl) N32-95-979Automatic Brass Float Drain (Poly Bowl) N32-95-978
Bowl O-ring N32-95-256
(800) 521-9200 PDF available www.driair.com 29
60 scfm Oil-Extractor Combo
Port Size Metal Bowl Poly Bowl
Manual BrassPetcock Drain
1/4” 4P-060-M02-DCP 4P-060-P02-DCP3/8” 4P-060-M03-DCP 4P-060-P03-DCP1/2” 4P-060-M04-DCP 4P-060-P04-DCP
Automatic Float Drain
1/4” 4P-060-M02-DC 4P-060-P02-DC3/8” 4P-060-M03-DC 4P-060-P03-DC1/2” 4P-060-M04-DC 4P-060-P04-DC
Height (in.)(M/P) Width (in.) Depth (in.)
10 8 3.810 8 3.810 8 3.8
10.5 8 3.810.5 8 3.810.5 8 3.8
Port Sizes ¼”, ⅜”, ½”Thread Styles NPT, BSPT, BSPPFlow Capacity 60 scfm @ 100 PSIFilter Capacity 1.0 Micron & larger
Activated Carbon OilAbsorption to 0.003 ppm
Differential Pressure < 5.0 PSID at rated flow
Max Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Max Temp/Pressure:Polycarbonate Bowl
125°F/150 PSIG
Approx. Weight (lb.) 7.0
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
WaterDirt
Heavy OilOil Vapor
Odor
Description Part Number
Replacement Element, 1st Stage 4P-060Replacement Element, 2nd Stage 3C-060Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N34-95-205Bowl Assy: Metal Bowl & Auto Float Drain N32-95-201Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-163Bowl Assy: Poly Bowl & Auto Float Drain N32-15-164Manual Petcock Drain PC-03Automatic Plastic Float Drain (Metal Bowl) N32-95-979Automatic Brass Float Drain (Poly Bowl) N32-95-978
Bowl O-ring N32-95-257
(800) 521-9200 PDF available www.driair.com 30
90/150 scfm Oil-Extractor Combo
WaterDirt
Heavy OilOil Vapor
Odor
Port Size Metal Bowl Poly Bowl
Manual BrassPetcock Drain
1/2” 4P-090-M04-DCP 4P-090-P04-DCP3/4” 4P-090-M04-DCP 4P-090-P04-DCP
1” 4P-090-M08-DCP 4P-090-P08-DCP1/2” 4P-150-M04-DCP 4P-150-P04-DCP3/4” 4P-150-M06-DCP 4P-150-P06-DCP
1” 4P-150-M08-DCP 4P-150-P08-DCP
AutomaticFloat Drain
1/2” 4P-090-M04-DC 4P-090-P04-DC3/4” 4P-090-M06-DC 4P-090-P06-DC
1” 4P-090-M08-DC 4P-090-P08-DC1/2” 4P-150-M04-DC 4P-150-P04-DC3/4” 4P-150-M06-DC 4P-150-P06-DC
1” 4P-150-M08-DC 4P-150-P08-DC
Height (in.)(M/P) Width (in.) Depth (in.)
18.75/15 10 4.618.75/15 10 4.618.75/15 10 4.618.75/15 10 4.618.75/15 10 4.618.75/15 10 4.6
17.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.6
Port Sizes ½”, ¾”, 1”Thread Styles NPT, BSPT, BSPPFlow Capacity 90 scfm @ 100 PSI
150 scfm @ 100 PSIFilter Capacity 1.0 Micron & larger
Activated Carbon OilAbsorption to 0.003 ppm
Differential Pressure < 5.0 PSID at rated flow
Max Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Max Temp/Pressure:Polycarbonate Bowl
125°F/150 PSIG
Approx. Weight (lb.) 12.0
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
Description Part Number
Replacement Element, 1st Stage 4P-090/4P-150Replacement Element, 2nd Stage 3C-090/3C-150Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N34-15-180Bowl Assy: Metal Bowl & Auto Float Drain N34-15-178Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-167Bowl Assy: Poly Bowl & Auto Float Drain N32-15-166Manual Petcock Drain PC-03Automatic Plastic Float Drain (Metal Bowl) N32-95-979Automatic Brass Float Drain (Poly Bowl) N32-95-978
Bowl O-ring N32-95-256
(800) 521-9200 PDF available www.driair.com 31
Eliminator II Desiccant Dryers
Description Part Number
Replacement Element, 1st Stage 4P-060Replacement Element, 2nd Stage DE401Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: 1st Stage N34-95-201Bowl : 2nd Stage N34-15-180O-ring: 1st Stage N32-95-257O-ring: 2nd Stage N32-95-256Automatic Float Drain: 1st Stage N32-95-979
Port Size Metal Bowl
1/4” Regulator & Gauge Assembly
1/4” E4000-23/8” E4000-31/2” E4000-4
No Regulator & Gauge Assembly
1/4” N4000-23/8” N4000-31/2” N4000-4
Height (in.) Width (in.) Depth (in.)
19.0 17 4.719.0 17 4.719.0 17 4.7
19.0 14 4.719.0 14 4.719.0 14 4.7
Port Sizes ¼”, ⅜”, ½”Thread Styles NPT, BSPT, BSPPFlow Capacity 10 scfm @ 100 PSIFilter Capacity 1.0 Micron & larger
Activated Carbon OilAbsorption to 0.003 ppm
Differential Pressure < 5.0 PSID at rated flow
Max Temp/Pressure:Aluminum Bowl
100°F/150 PSIG
Approx. Weight (lb.) 14.0
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
(800) 521-9200 PDF available www.driair.com 32
E6000/E8000 Desiccant Dryer
Description Part Number
Replacement Element, 1st Stage 4P-090Replacement Element, 2nd Stage DE6000Replacement Element, 3rd Stage DE6000Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: 1st Stage N34-15-178Bowl Assy: 2nd /3rd Stage N34-15-180O-ring: 1st Stage N32-95-257O-ring: 2nd/3rd Stage N32-95-256Automatic Float Drain: 1st Stage N32-95-979Manual Brass Drain: 2nd/3rd Stage PC-03Replacement Regulator (E6000) NAR5000-N06Replacement Regulator (E8000) NAR5000-N10Replacement Gauge KSG-008
Port Size
E6000 3/4”E8000 1”
Height (in.) Width (in.) Depth (in.)
19 30 519 30 5
Port Sizes ¾”, 1”Thread Styles NPT, BSPT, BSPPFlow Capacity 25 scfm @ 100 PSIFilter Capacity 1.0 Micron & larger
Activated Carbon OilAbsorption to 0.003 ppm
Differential Pressure < 5.0 PSID at rated flow
Max Temp/Pressure:Aluminum Bowl
100°F/150 PSIG
Approx. Weight (lb.) 25.0
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
(800) 521-9200 PDF available www.driair.com 33
Food Grade: Eliminex & Eliminex Combo
Special food grade certified non-toxic powder-coated filters meet the requirements of 21 CFR 100 while the coating ingredients meet at least one section of FDA Title 21, with the exception of food items containing 8% alcohol. For more information or special applications, please consult factory.
Description Part Number
Replacement Element, 1st Stage 1P-060/1P-090/1P-150
Replacement Element, 2nd Stage (Combo Unit) 3C-060/3C-090/3C-150
Differential Pressure Indicator N32-W1-DPI-FGBlanking Cap (Cover for Indicator) N32-95-020-FGBowl Assy: Metal Bowl & Manual Petcock Drain (60)
Bowl Assy: Metal Bowl & Auto Float Drain (60)
Bowl Assy: Metal Bowl & Manual Petcock Drain (90/150)
Bowl Assy: Metal Bowl & Auto Float Drain (90/150)
Manual Petcock Drain PC-02Automatic Float Drain N32-95-979-FGBowl O-ring (60) N32-95-257Bowl O-ring (90/150) N32-95-256
Port Size Metal Bowl
Manual BrassPetcock Drain
3/8” 1P-060-F03-P1/2” 1P-060-F04-P3/4” 1P-090-F06-P
1” 1P-150-F08-P
Manual BrassPetcock Drain COMBO
3/8” 1P-060-F03-DCP1/2” 1P-060-F04-DCP3/4” 1P-090-F06-DCP
1” 1P-150-F08-DCP
Automatic PlasticFloat Drain
3/8” 1P-060-F03-F1/2” 1P-060-F04-F3/4” 1P-090-F06-F
1” 1P-150-F08-F
Automatic PlasticFloat Drain COMBO
3/8” 1P-060-F03-DC1/2” 1P-060-F04-DC3/4” 1P-090-F06-DC
1” 1P-150-F08-DC
Height(in.) Width (in.) Depth (in.)
10 3.8 3.810 3.8 3.8
18.75 4.6 4.618.75 4.6 4.6
10 8 3.810 8 3.8
18.75 10 4.618.75 10 4.6
10.5 3.8 3.810.5 3.8 3.817.5 4.6 4.617.5 4.6 4.610.5 8 3.810.5 8 3.817.5 10 4.617.5 10 4.6
Port Sizes ⅜”, ½”, ¾”, 1”Thread Styles NPT, BSPT, BSPPFlow Capacity 60 scfm @ 100 PSI
90 scfm @ 100 PSI150 scfm @ 100 PSI
Filter Capacity 1.0 Micron & largerActivated Carbon OilAbsorption to 0.003 ppm
Differential Pressure < 5.0 PSID at rated flow
Max Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Approx. Weight (lb.) 3.5/6.0-7.0/12.0
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
(800) 521-9200 PDF available www.driair.com 34
Food Grade: Eliminizer & Eliminizer Combo
Special food grade certified non-toxic powder-coated filters meet the requirements of 21 CFR 100 while the coating ingredients meet at least one section of FDA Title 21, with the exception of food items containing 8% alcohol. For more information or special applications, please consult factory.
Description Part Number
Replacement Element, 1st Stage 3P-060/3P-090/3P-150
Replacement Element, 2nd Stage (Combo Unit) 3C-060/3C-090/3C-150
Differential Pressure Indicator N32-W1-DPI-FGBlanking Cap (Cover for Indicator) N32-95-020-FGBowl Assy: Metal Bowl & Manual Petcock Drain (60)
Bowl Assy: Metal Bowl & Auto Float Drain (60)
Bowl Assy: Metal Bowl & Manual Petcock Drain (90/150)
Bowl Assy: Metal Bowl & Auto Float Drain (90/150)
Manual Petcock Drain PC-02Automatic Float Drain N32-95-979-FGBowl O-ring (60) N32-95-257Bowl O-ring (90/150) N32-95-256
Port Size Metal Bowl
Manual BrassPetcock Drain
3/8” 3P-060-F03-P1/2” 3P-060-F04-P3/4” 3P-090-F06-P
1” 3P-150-F08-P
Manual BrassPetcock Drain COMBO
3/8” 3P-060-F03-DCP1/2” 3P-060-F04-DCP3/4” 3P-090-F06-DCP
1” 3P-150-F08-DCP
Automatic PlasticFloat Drain
3/8” 3P-060-F03-F1/2” 3P-060-F04-F3/4” 3P-090-F06-F
1” 3P-150-F08-F
Automatic PlasticFloat Drain COMBO
3/8” 3P-060-F03-DC1/2” 3P-060-F04-DC3/4” 3P-090-F06-DC
1” 3P-150-F08-DC
Port Sizes ⅜”, ½”, ¾”, 1”Thread Styles NPT, BSPT, BSPPFlow Capacity 60 scfm @ 100 PSI
90 scfm @ 100 PSI150 scfm @ 100 PSI
Filter Capacity 1.0 Micron & largerActivated Carbon OilAbsorption to 0.003 ppm
Differential Pressure < 5.0 PSID at rated flow
Max Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Approx. Weight (lb.) 3.5/6.0-7.0/12.0
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
Height(in.) Width (in.) Depth (in.)
10 3.8 3.810 3.8 3.8
18.75 4.6 4.618.75 4.6 4.6
10 8 3.810 8 3.8
18.75 10 4.618.75 10 4.6
10.5 3.8 3.810.5 3.8 3.817.5 4.6 4.617.5 4.6 4.610.5 8 3.810.5 8 3.817.5 10 4.617.5 10 4.6
(800) 521-9200 PDF available www.driair.com 35
Food Grade: Oil-Extractor & Oil-Extractor Combo
Special food grade certified non-toxic powder-coated filters meet the requirements of 21 CFR 100 while the coating ingredients meet at least one section of FDA Title 21, with the exception of food items containing 8% alcohol. For more information or special applications, please consult factory.
Description Part Number
Replacement Element, 1st Stage 4P-060/4P-090/4P-150
Replacement Element, 2nd Stage (Combo Unit) 3C-060/3C-090/3C-150
Differential Pressure Indicator N32-W1-DPI-FGBlanking Cap (Cover for Indicator) N32-95-020-FGBowl Assy: Metal Bowl & Manual Petcock Drain (60)
Bowl Assy: Metal Bowl & Auto Float Drain (60)
Bowl Assy: Metal Bowl & Manual Petcock Drain (90/150)
Bowl Assy: Metal Bowl & Auto Float Drain (90/150)
Manual Petcock Drain PC-02Automatic Float Drain N32-95-979-FGBowl O-ring (60) N32-95-257Bowl O-ring (90/150) N32-95-256
Port Size Metal Bowl
Manual BrassPetcock Drain
3/8” 4P-060-F03-P1/2” 4P-060-F04-P3/4” 4P-090-F06-P
1” 4P-150-F08-P
Manual BrassPetcock Drain COMBO
3/8” 4P-060-F03-DCP1/2” 4P-060-F04-DCP3/4” 4P-090-F06-DCP
1” 4P-150-F08-DCP
Automatic PlasticFloat Drain
3/8” 4P-060-F03-F1/2” 4P-060-F04-F3/4” 4P-090-F06-F
1” 4P-150-F08-F
Automatic PlasticFloat Drain COMBO
3/8” 4P-060-F03-DC1/2” 4P-060-F04-DC3/4” 4P-090-F06-DC
1” 4P-150-F08-DC
Port Sizes ⅜”, ½”, ¾”, 1”Thread Styles NPT, BSPT, BSPPFlow Capacity 60 scfm @ 100 PSI
90 scfm @ 100 PSI150 scfm 100 PSI
Filter Capacity 1.0 Micron & largerActivated Carbon OilAbsorption to 0.003 ppm
Differential Pressure < 5.0 PSID at rated flow
Max Temp/Pressure:Aluminum Bowl
175°F/200 PSIG
Approx. Weight (lb.) 3.5/6.0-7.0/12.0
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Replacement Parts & AccessoriesSpecifications
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
Height(in.) Width (in.) Depth (in.)
10 3.8 3.810 3.8 3.8
18.75 4.6 4.618.75 4.6 4.6
10 8 3.810 8 3.8
18.75 10 4.618.75 10 4.6
10.5 3.8 3.810.5 3.8 3.817.5 4.6 4.617.5 4.6 4.610.5 8 3.810.5 8 3.817.5 10 4.617.5 10 4.6
(800) 521-9200 PDF available www.driair.com 36
Special food grade certified non-toxic powder-coated filters meet the requirements of 21 CFR 100 while the coating ingredients meet at least one section of FDA Title 21, with the exception of food items containing 8% alcohol. For more information or special applications, please consult factory.
Description Part Number
Replacement Element 3C-060/3C-090/3C-150
Differential Pressure Indicator N32-W1-DPI-FGBlanking Cap (Cover for Indicator) N32-95-020-FGBowl Assy: Metal Bowl & Manual Petcock Drain (60)
Bowl Assy: Metal Bowl & Auto Float Drain (60)
Bowl Assy: Metal Bowl & Manual Petcock Drain (90/150)
Bowl Assy: Metal Bowl & Auto Float Drain (90/150)
Manual Petcock Drain PC-02Automatic Float Drain N32-95-979-FGBowl O-ring (60) N32-95-257Bowl O-ring (90/150) N32-95-256
Port Size Metal Bowl
Food GradeCoalescers-
Manual Drain
3/8” 3C-060-F03-P1/2” 3C-060-F04-P3/4” 3C-090-F06-P
1” 3C-150-F08-P
Food GradeCoalescers-Auto Drain
3/8” 3C-060-F03-F1/2” 3C-060-F04-F3/4” 3C-090-F06-F
1” 3C-150-F08-F
Height (in.) Width (in.) Depth (in.)
10 3.8 3.810 3.8 3.8
18.75 4.6 4.618.75 4.6 4.610.5 3.8 3.810.5 3.8 3.817.5 4.6 4.617.5 4.6 4.6
Port Sizes ⅜”, ½”, ¾”, 1”Thread Styles NPTFlow Capacity 60 scfm @ 100 PSI
90 scfm @ 100 PSI150 scfm @ 100 PSI
Filter Capacity 0.01 Micron & largerDifferential Pressure < 1.5 PSID
at rated flowMax Temp/Pressure:Aluminum Bowl
125°F/150 PSIG
Approx. Weight (lb.) 3.5/6.0
Replacement Parts & AccessoriesSpecifications
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height
Food Grade: Coalescer
(800) 521-9200 PDF available www.driair.com 37
Food Grade: Eliminator II Desiccant Dryer
Description Part Number
Replacement Element, 1st Stage 4P-090Replacement Element, 2nd Stage DE401Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy w/Drain: 1st StageBowl: 2nd StageO-ring: 1st Stage N32-95-257O-ring: 2nd Stage N32-95-256Automatic Float Drain: 1st Stage N32-95-979
Port Size Metal Bowl
Food Grade 1/2” FG4000
Height (in.) Width (in.) Depth (in.)
19 17 4.7
Port Sizes ½”Thread Styles NPT, BSPT, BSPPFlow Capacity 10 scfm @ 100 PSIFilter Capacity 1.0 Micron & larger
Activated Carbon OilAbsorption to 0.003 ppm
Differential Pressure < 5.0 PSID at rated flow
Max Temp/Pressure:Aluminum Bowl
100°F/150 PSIG
Approx. Weight (lb.) 14.0
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.
Special food grade certified non-toxic powder-coated filters meet the requirements of 21 CFR 100 while the coating ingredients meet at least one section of FDA Title 21, with the exception of food items containing 8% alcohol. For more information or special applications, please consult factory.
(800) 521-9200 PDF available www.driair.com 38
Stainless Steel: Eliminex & Eliminex Combo
316 Stainless Steel
Description Part Number
Replacement Element, 1st Stage 1P-060/1P-090/1P-150
Replacement Element, 2nd Stage (Combo Unit) 3C-060/3C-090/3C-150
Bowl Assy: Metal Bowl & Manual Petcock DrainBowl Assy: Metal Bowl & Auto Float DrainManual Petcock Drain PC-03Automatic Float Drain N32-95-979-FGBowl O-ring (60) N32-95-147Bowl O-ring (90/150) KSG-176
Port Size Metal Bowl
Manual BrassPetcock Drain
1/2” 1P-060-S04-P1” 1P-150-S08-P
Manual BrassPetcock Drain COMBO
1/2” 1P-060-S04-DCP
1” 1P-150-S08-DCP
Automatic PlasticFloat Drain
1/2” 1P-060-S04-F1” 1P-150-S08-F
Automatic PlasticFloat Drain COMBO
1/2” 1P-060-S04-DC1” 1P-150-S08-DC
Height(in.) Width (in.) Depth (in.)
10 8 3.818.75 8 3.8
10 10 4.6
18.75 10 4.6
10.5 8 3.817.5 8 3.8
10.5 10 4.6
17.5 10 4.6
Port Sizes ½”(60), 1” (90/150)Thread Styles NPT, BSPT, BSPP
Flow Capacity 60 scfm @ 100 PSI90 scfm @ 100 PSI150 scfm @ 100 PSI
Filter Capacity 3.0+ (Eliminizer)0.01+ (Combo Units)
Differential Pressure < 3.0 PSID at rated flow
Max Temp/Pressure:Manual Drain
150°F/250 PSIG
Max Temp/Pressure:Auto Float Drain
125°F/150 PSIG
Approx. Weight (lb.) 6.0/9.0-12.0/18.0
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
(800) 521-9200 PDF available www.driair.com 39
Stainless Steel: Eliminizer & Eliminizer Combo
316 Stainless Steel
Description Part Number
Replacement Element, 1st Stage 3P-060/3P-090/3P-150
Replacement Element, 2nd Stage (Combo Unit) 3C-060/3C-090/3C-150
Bowl Assy: Metal Bowl & Manual Petcock DrainBowl Assy: Metal Bowl & Auto Float DrainManual Petcock Drain PC-03Automatic Float Drain N32-95-979-FGBowl O-ring (60) N32-95-147Bowl O-ring (90/150) KSG-176
Port Size Metal Bowl
Manual BrassPetcock Drain
1/2” 3P-060-S04-P1” 3P-150-S08-P
Manual BrassPetcock Drain COMBO
1/2” 3P-060-S04-DCP
1” 3P-150-S08-DCP
Automatic PlasticFloat Drain
1/2” 3P-060-S04-F1” 3P-150-S08-F
Automatic PlasticFloat Drain COMBO
1/2” 3P-060-S04-DC1” 3P-150-S08-DC
Port Sizes ½”(60), 1” (90/150)Thread Styles NPT, BSPT, BSPP
Flow Capacity 60 scfm @ 100 PSI90 scfm @ 100 PSI150 scfm @ 100 PSI
Filter Capacity 1.0+ (Eliminizer)0.01+ (Combo Units)
Differential Pressure < 3.0 PSID at rated flow
Max Temp/Pressure:Manual Drain
150°F/250 PSIG
Max Temp/Pressure:Auto Float Drain
125°F/150 PSIG
Approx. Weight (lb.) 6.0/9.0-12.0/18.0
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder GuideHeight
(in.) Width (in.) Depth (in.)
10 8 3.818.75 8 3.8
10 10 4.6
18.75 10 4.6
10.5 8 3.817.5 8 3.8
10.5 10 4.6
17.5 10 4.6
(800) 521-9200 PDF available www.driair.com 40
Stainless Steel: Oil-Extractor & Oil-Extractor Combo
316 Stainless Steel
Description Part Number
Replacement Element, 1st Stage 4P-060/4P-090/4P-150
Replacement Element, 2nd Stage (Combo Unit) 3C-060/3C-090/3C-150
Bowl Assy: Metal Bowl & Manual Petcock DrainBowl Assy: Metal Bowl & Auto Float DrainManual Petcock Drain PC-03Automatic Float Drain N32-95-979-FGBowl O-ring (60) N32-95-147Bowl O-ring (90/150) KSG-176
Port Size Metal Bowl
Manual BrassPetcock Drain
1/2” 4P-060-S04-P1” 4P-150-S08-P
Manual BrassPetcock Drain COMBO
1/2” 4P-060-S04-DCP
1” 4P-150-S08-DCP
Automatic PlasticFloat Drain
1/2” 4P-060-S04-F1” 4P-150-S08-F
Automatic PlasticFloat Drain COMBO
1/2” 4P-060-S04-DC1” 4P-150-S08-DC
Port Sizes ½”(60), 1” (90/150)Thread Styles NPT, BSPT, BSPP
Flow Capacity 60 scfm @ 100 PSI90 scfm @ 100 PSI150 scfm @ 100 PSI
Filter Capacity 1.0+ (Single Stage)0.01+ (Combo Units)Activated Carbon Oil Absorption to 0.003 ppm
Differential Pressure < 3.0 PSID at rated flow
Max Temp/Pressure:Manual Drain
150°F/250 PSIG
Max Temp/Pressure:Auto Float Drain
125°F/150 PSIG
Approx. Weight (lb.) 6.0/9.0-12.0/18.0
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder GuideHeight
(in.) Width (in.) Depth (in.)
10 8 3.818.75 8 3.8
10 10 4.6
18.75 10 4.6
10.5 8 3.817.5 8 3.8
10.5 10 4.6
17.5 10 4.6
(800) 521-9200 PDF available www.driair.com 41
Stainless Steel: Coalescers
316 Stainless Steel
Description Part Number
Replacement Element, 1st Stage 3C-060/3C-0903C-150/3C-250
Bowl Assy: Metal Bowl & Manual Petcock DrainBowl Assy: Metal Bowl & Auto Float DrainManual Petcock Drain PC-03Automatic Float Drain N32-95-979-FGBowl O-ring (60) N32-95-147Bowl O-ring (90/150/250) KSG-176
Port Size Metal Bowl
Manual BrassPetcock Drain
1/2” 3C-060-S04-P3/4” 3C-090-S06-P
1” 3C-150-S08-P1” 3C-250-S08-P
Automatic PlasticFloat Drain
1/2” 3C-060-S04-F3/4” 3C-090-S06-F
1” 3C-150-S08-F1” 3C-250-S08-F
Port Sizes ½”(60) ¾”, 1” (90/150/250)
Thread Styles NPT, BSPT, BSPP
Flow Capacity 60 scfm @ 100 PSI90 scfm @ 100 PSI150 scfm @ 100 PSI250 scfm@ 100 PSI
Filter Capacity 0.01 micron & larger
Differential Pressure < 3.0 PSID at rated flow
Max Temp/Pressure:Manual Drain
150°F/250 PSIG
Max Temp/Pressure:Auto Float Drain
125°F/150 PSIG
Approx. Weight (lb.) 6.0/9.0-12.0/18.0
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder GuideHeight
(in.) Width (in.) Depth (in.)
10 3.8 3.810 3.8 3.8
18.75 4.6 4.618.75 4.6 4.6
10.5 3.8 3.810.5 3.8 3.817.5 4.6 4.617.5 4.6 4.6
(800) 521-9200 PDF available www.driair.com 42
High Pressure: Eliminex & Eliminex Combo
Description Part Number
Replacement Element, 1st Stage 1P-060/1P-090/1P-150
Replacement Element, 2nd Stage (Combo Unit) 3C-060/3C-090/3C-150
Bowl Assy: Metal Bowl & Manual Petcock DrainManual Petcock Drain PC-03Bowl O-ring (60) N32-95-147Bowl O-ring (90/150) KSG-176
Port Size Metal Bowl
Manual BrassPetcock Drain
1/2” 1P-060-M04-PHP3/4” 1P-120-M06-PHP
1” 1P-175-M08-PHP
Manual BrassPetcock Drain COMBO
1/2” 1P-060-M04-DCHP
3/4” 1P-120-M06-DCHP1” 1P-175-M08-DCHP
Height(in.) Width (in.) Depth (in.)
10.2 3.1 3.115.4 4.7 4.715.4 4.7 4.710.2 7.2 3.115.4 10.2 4.715.4 10.2 4.7
Port Sizes ½”, ¾”, 1” Thread Styles NPT, BSPT, BSPP
Flow Capacity 60 scfm @ 100 PSI120 scfm @ 100 PSI175 scfm @ 100 PSI
Filter Capacity 3.0 micron and larger0.01+ (Combo Units)
Differential Pressure < 3.0 PSID at rated flow
Max Temp/Pressure:Metal HP Housing
200°F/500 PSIG
Approx. Weight (lb.) 2.0/4.0-4.0/8.0
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
(800) 521-9200 PDF available www.driair.com 43
High Pressure: Eliminizer & Eliminizer Combo
Description Part Number
Replacement Element, 1st Stage 3P-060/3P-090/3P-150
Replacement Element, 2nd Stage (Combo Unit) 3C-060/3C-090/3C-150
Bowl Assy: Metal Bowl & Manual Petcock DrainManual Petcock Drain PC-03Bowl O-ring (60) N32-95-147Bowl O-ring (90/150) KSG-176
Port Size Metal Bowl
Manual BrassPetcock Drain
1/2” 1P-060-M04-PHP3/4” 1P-120-M06-PHP
1” 1P-175-M08-PHP
Manual BrassPetcock Drain COMBO
1/2” 1P-060-M04-DCHP
3/4” 1P-120-M06-DCHP1” 1P-175-M08-DCHP
Height(in.) Width (in.) Depth (in.)
Port Sizes ½”, ¾”, 1” Thread Styles NPT, BSPT, BSPP
Flow Capacity 60 scfm @ 100 PSI120 scfm @ 100 PSI175 scfm @ 100 PSI
Filter Capacity 3.0 micron and larger0.01+ (Combo Units)
Differential Pressure < 3.0 PSID at rated flow
Max Temp/Pressure:Metal HP Housing
200°F/500 PSIG
Approx. Weight (lb.) 2.0/4.0-4.0/8.0
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
(800) 521-9200 PDF available www.driair.com 44
High Pressure: Coalescer
Description Part Number
Replacement Element, 1st Stage 3P-060/3P-090/3P-150
Bowl Assy: Metal Bowl & Manual Petcock DrainManual Petcock Drain PC-03Bowl O-ring (60) N32-95-147Bowl O-ring (90/150) KSG-176
Port Size Metal Bowl
Manual BrassPetcock Drain
1/2” 3C-060-M04-PHP3/4” 3C-150-M06-PHP
1” 3C-150-M08-PHP
Height(in.) Width (in.) Depth (in.)
Port Sizes ½”, ¾”, 1” Thread Styles NPT, BSPT, BSPP
Flow Capacity 60 scfm @ 100 PSI150 scfm @ 100 PSI
Filter Capacity 0.01 micron and largerDifferential Pressure < 3.0 PSID
at rated flowMax Temp/Pressure:Metal HP Housing
200°F/500 PSIG
Approx. Weight (lb.) 2.0/4.0
Replacement Parts & AccessoriesSpecifications
Physical DimensionsOrder Guide
(800) 521-9200 PDF available www.driair.com 45
Refrigerated Dryers
Call factory for various power supply options for each model as well as information on non-cyling models
· 20-2000 scfm depending on model
· Port sizes 1/4” - 4”
· Maximum work 230 PSIG
· Maximum temperature 158°F
· Maintains constant 38°F dew point
· Unique energy efficient cycling dryer reduces costs up to 80%
· Compact size for easy fit
· Automatic timer drain (w/manual override)
· Low maintenance, long life design
· On/Off switch with multi-function display
Features & Benefits
Specifications
Hei
ght
Width Depth
Model Air Flow(scfm)
Air Connection(NPT)
Net Weight(lb)
Height(in)
Width(in)
Depth(in)
RD 0020 20 1/2” 80 20.10 20.90 11.80
RD 0030 30 1/2” 86 20.10 20.90 11.80
RD 0050 50 1/2” 91 20.10 20.90 11.80
RD 0075 75 3/4” 143 29.50 25.60 14.60
RD 0100 100 3/4” 148 29.50 25.60 14.60
RD 0125 125 1” 176 29.50 25.60 14.60
RD 0150 150 1” 209 33.50 30.70 14.60
RD 0175 175 1” 227 33.50 30.70 14.60
RD 0200 200 1-1/2” 368 37.00 30.70 28.90
RD 0250 250 1-1/2” 368 37.00 30.70 28.90
RD 0325 325 1-1/2” 416 37.00 30.70 28.90
RD 0425 425 2” 582 43.30 34.00 40.00
RD 0520 520 2” 646 43.30 34.00 40.00
RD 0600 600 2-1/2” 833 43.30 34.00 51.90
RD 0700 700 2-1/2” 866 43.30 34.00 51.90
RD 0800 700 2-1/2” 866 43.30 34.00 51.90
RD 1000 1000 3” 1598 61.70 37.90 62.60
RD 1200 1220 4” 1907 61.70 37.90 71.30
RD 1600 1600 4” 2513 81.70 34.10 88.00
RD 2000 2000 4” 3064 81.70 34.10 88.00
(800) 521-9200 PDF available www.driair.com 46
Piggyback Filter/Regulators
ReplacementElement Bowl Assy
Mounting Bracket(optional)
O-Ring
RT-F250 F250-E F250-BMD F250-BKT F250-ORRT-F380 F380-E F380-BMD F380-BKT F380-ORRT-F500 F500-E F500-BMD F500-BKT F500-ORRT-FR250 FR250-E F250-BMD F250-BKT F250-ORRT-FR380 FR380-E F380-BMD F380-BKT F380-ORRT-FR500 FR500-E F500-BMD F500-BKT F500-OR
Accessories & Replacement Parts:
RT-FR500-G
RT-F500
Filter/Regulator
Port Size(in)
Flow Capacity(scfm)
Filter Capacity
Height(in)
Depth(in)
Width(in)
RT-FR250-G 1/4” 30 5 micron+ 7.8 1.65 1.65RT-FR380-G 3/8” 80 5 micron+ 10.8 2.49 2.49RT-FR500-G 1/2” 80 5 micron+ 10.8 2.49 2.49
Filter Port Size(in)
Flow Capacity(scfm)
Filter Capacity
Height(in)
Depth(in)
Width(in)
RT-F250 1/4” 30 5 micron+ 7.8 1.65 1.65RT-F380 3/8” 80 5 micron+ 10.8 2.49 2.49RT-F500 1/2” 80 5 micron+ 10.8 2.49 2.49
• Filter with adjustable 0-120 PSI regulator
• Filter/Regulator with glass face chrome gauge
• Low pressure drop
• Can be wall mounted or panel nut mounted
• Low cost, high efficiency design
• Semi-automatic drain with manual override
• Filters to 5 micron
• Maximum pressure is 230 PSI
• Temperature range from 40°F to 120°F
• Polycarbonate construction
(800) 521-9200 PDF available www.driair.com 47
Heavy Duty Regulators
• Rugged, heavy duty high-flow design• All metal, corrosion-resistant anodized aluminum body• Tee handle knob, relieving type regulator• Chemically resistant Buna N diaphragm• Available with ¼”, ⅜”, ½”, ¾”, 1”, 1 ¼”, 1 ½” NPT ports
• Gauge included with unitsR500HD-G R1250HD-G
Part # Flow Capacity(scfm)
AdjustingRange
Pressure(psig)
Port Size
(NPT)
MaximumSupply
Pressure(psig)
MaximumOperating
Temp(°F)
Weight(lbs)
Dimensions(inches)
Diameter x Height
R250HD-G 86 10-130 1/4” 250 175 1.2 2.25 x 5.12R380HD-G 100 10-130 3/8” 250 175 1.2 2.25 x 5.12R500HD-G 108 10-130 1/2” 250 175 1.2 2.25 x 5.12R750HD-G 175 10-130 3/4” 250 175 3.2 3.75 x 6.75
R1000HD-G 300 10-130 1” 250 175 3.2 3.75 x 6.75R1250HD-G 450 10-130 1-¼” 250 175 3.9 4 x 6.75R1500HD-G 450 10-130 1-½” 250 175 3.9 4x 6.75
To order without gauge, omit ‘-G’ from the part number*Inlet pressure 100 PSIG (6.9 bar). Secondary pressure 80 PSIG (5.5 bar).
(800) 521-9200 PDF available www.driair.com 48
Mini Regulators & Replacement Gauges
Regulator & Gauge
Replacement Gauges
1/8” Regulatorw/0-30psi Gauge
1/4” Regulatorw/0-30psi Gauge
1/8” Regulatorw/0-60psi Gauge
1/4” Regulatorw/0-60psi Gauge
1/8” Regulatorw/0-120psi Gauge
1/4” Regulatorw/0-120psi Gauge
1.5” Diameter Gauge, 0-60psi
1/8” Centered Back(FR Piggyback Series)
1.5” Diameter Gauge, 0-160psi
1/8” Centered Back(FR Piggyback Series)
2” Diameter Gauge, 0-160 psi, 1/8” BM
1.5” Diameter Gauge, 0-30 psi, 1/8” BM
1.5” Diameter Gauge, 0-60 psi, 1/8” BM
MR0060-01G
MR1060-02G
MR0030-01G
MR1030-02G
PG-060-1.5-CB PG-160-1.5-CB
PG-160PG-030-15C PG-060-15C
MR0120-01G
MR1120-02G
(800) 521-9200 PDF available www.driair.com 49
Standard & Heavy Duty Lubricators
• Rugged, heavy duty high-flow design• All metal, corrosion-resistant anodized aluminum body• Siphon tube filter provides clean lubricant downstream• Quick-disconnect clamp ring for easy bowl removal• Adjustable oil feed w/ tamper-proofing capability• Can be filled while under pressure• Available with ¼”, ⅜”, ½”, ¾”, 1” NPT portsL750HDM
L250 L380 L500
L1000HDM
Part # Flow
Maximum Supply
Pressure(psig)
Port Size
(NPT)
MaximumOperating
Temp(°F)
Weight(lbs)
Dimensions(inches)
Diameter x Height
L250HDM 40 0-250 1/4” 200 3.0 2.5 x 6.88L380HDM 100 0-250 3/8” 200 3.0 2.5 x 6.88L500HDM 120 0-250 1/2” 200 3.0 2.5 x 6.88L750HDM 190 0-250 3/4” 200 4.0 3.75 x 11.25
L1000HDM 270 0-250 1” 200 4.0 3.75 x 11.25
Part # Flow
Maximum Supply
Pressure(psig)
Port Size
(NPT)
MaximumOperating
Temp(°F)
Weight(lbs)
Diameter x Height
(in)
L250 30 0-230 1/4” 122 1.0L380 80 0-230 3/8” 122 1.0L500 80 0-230 1/2” 122 1.0
*Inlet pressure 100 PSIG (6.9 bar). Secondary pressure 80 PSIG (5.5 bar).
(800) 521-9200 PDF available www.driair.com 50
Standard Replacement Drains & Additional Drains
Standard Automatic Replacement Drains
Standard Manual Replacement Drains
Additional Drains
Auto Float, Brass
Auto Float, Plastic
¼” Petcock, Brass
Electronic Timer Drain
Auto Float, Brass/Plastic
⅜” Petcock Brass
Tank Drain
Auto Float, External
½”Ball Valve w/Handle
Magnetic Zero Loss Drain
N32-95-978N32-95-973
PC-02
ED-2-4
N32-95-979
PC-03
TD-5
N32-95-XD8
BV-051
MAG 11
(800) 521-9200 PDF available www.driair.com 51
Mounting Brackets & Pressure Indicators
Brackets Available:
Differential Pressure Indicator
20 SCFM OnlyWall Mounted
60 SCFM OnlyWall Mounted
(combo units req. 2)
½” Models OnlySupports units on pipe
Units can still rotate
¼”- 1” Units¼” x ½” slots
on 1½” centers
20 SCFM Only- Can be used to connect combo unit modularly
Differential pressure indicator used on most
models ¼”- 2” NPT
Blanking cap to replace indicator
N32-95-734
GPA-95-016
3P-020-M02-Fi mounted with GPA-95-016
3P-020-M02-Fi mounted with GPA-95-016
3P-020-M02-Fi mounted with N34-95-969
N32-W1-DPI N32-95-020
PB-004N34-95-969 BK-1
Examples:
Universal
(800) 521-9200 PDF available www.driair.com 52
0.01 Micron& Larger
Replacement Elements
1P-0601P-0901P-1201P-1501P-175
1M-3001M-4001M-700
1M-12001M-25001M-5500
3C-0203C-021*
3C-0603C-061*
3C-0903C-091*
3C-1503C-150*
3C-2503C-250*
3C-3003C-301*
3C-4003C-401*
3C-7003C-701*3C-1200
3C-1201*3C-19003C-3000
60 SCFM90 SCFM120 SCFM150 SCFM175 SCFM300 SCFM400 SCFM700 SCFM1200 SCFM2500 SCFM5500 SCFM
20 SCFM20 SCFM60 SCFM60 SCFM90 SCFM90 SCFM150 SCFM150 SCFM250 SCFM250 SCFM300 SCFM300 SCFM400 SCFM400 SCFM700 SCFM700 SCFM1200 SCFM1200 SCFM1900 SCFM3000 SCFM
3.0 Micron& Larger
Elements for Eliminex Units
Constructed of washable stainless steel mesh
Constructed of stainless steel mesh & cotton
Constructed of stainless steel mesh, cotton and activated carbon
Constructed of long lasting borosilicate material
Elements for Coalescing Units
20 SCFM35 SCFM60 SCFM90 SCFM150 SCFM
60 SCFM90 SCFM150 SCFM
3P-0603P-0903P-150
1.0 Micron & Larger
0.003 ppm& Larger
Elements for Eliminzer Units
Elements for Oil-Extractor Units
*Grade 1 Coalescing Element
(Grade 2 is standard)
Combo units have 2 replacement elements: 1st stage element (The first 5 characters in the model number) with a coordinating coalescing
element in the 2nd stage.
Elements are shown clear for demonstration only.
3C1P/1M
3P
4P
ie) 3P-060-M04-DCi
3P-060 + 3C-060
(800) 521-9200 PDF available www.driair.com 53
Grade 1 Coalescing Element
3C-0213C-0613C-0913C-1513C-2513C-3013C-4013C-701
3C-1201
20 scfm60 scfm90 scfm150 scfm250 scfm300 scfm400 scfm700 scfm1200 scfm
A finer grade coalescing element with a rating of 0.01 micron at 99.99998%
efficiency available in:
•Coalescer Units•Eliminex Combo Units•Eliminizer Combo Units•Oil-Extractor Combo Units
Product Line 20 35 60 90 150 250 300 400 700 1200 1900 3000
Eliminex Combo • • • • • • •
Eliminizer Combo • • • •
Oil-Extractor Combo • • • •
Coalscer • • • • • • • • •
• Available with grade 1 coalescing element