Reading Technologies, Inc.

Reading Technologies, Inc.Compressed Air Specialists

1031F MacArthur Road Reading, PA 19605

(800) 521-9200www.driair.com

One Year WarrantyCall (800) 521-9200

Choosing the Right RTi Filter.................Application & Part Number Guide ..........Eliminex High Flow Separators...............Eliminex High Flow Combo Units ...........Eliminizer Filter/Dryers ......................Eliminizer Filter/Dryer Combo Units .......Coalescers ....................................Oil-Extractors .................................Oil Extractor Combo Units ...................Desiccant Dryers .............................Food Grade Units .............................Stainless Steel Units .........................High Pressure Units ..........................Refrigerated Dryers ..........................Regulators ....................................Lubricators ....................................Drains & Accessories ........................Replacement Elements ......................

ab181417202729313338424546495052

Table of Contents

Eliminex® Description: RTi patented inverse flow filter-dryer with all stainless steel mesh filter packing, excellent water and dirt capture to 3 microns. Port Size Range: 1/2” NPT to 6” ASA (150#) Flange Flow Range: 60 scfm to 5500 scfm @ 100 PSI Applications: Generally used in main lines and in heavy duty service where heavy water removal is needed. Also good for outdoor service where freezing temperatures can be encountered.

Eliminex® Combo Description: (2) stage assembly which adds a high efficiency 0.01 micron Coalescer behind an Eliminex® to give superior oil and fine particulate capture, in addition to the heavy water removal. 99.99998% efficient at .01 micron Port Size Range: 1/2” NPT to 6” ASA (150#) Flange Flow Range: 60 scfm to 3000 scfm @ 100 PSI Applications: Generally used in main lines and in heavy duty service where heavy water, dirt & oil removal is needed.

Eliminizer® Description: RTi patented inverse flow filter-dryer with (2) stage filter packing, stainless steel mesh backed by cotton/polyester mesh packing. Excellent water and dirt capture to 1 micron. Port Size Range: 1/4” NPT to 1” NPT Flow Range: 20 scfm to 150 scfm @ 100 PSI Applications: Generally used at point of use and in heavy duty service where heavy water & dirt removal is needed.

Eliminizer® Combo Description: (2) stage assembly which adds a high efficiency 0.01 micron Coalescer behind an Eliminizer® to give superior oil and fine particulate capture, in addition to the heavy water removal. 99.99998% efficient at .01 micron. Port Size Range: 1/4” NPT to 1” NPT Flow Range: 20 scfm to 150 scfm @ 100 PSI Applications: Generally used at point of use and in heavy duty service where heavy water, dirt and oil removal is needed.

Coalescer Description: High efficiency 0.01 micron Coalescer, 99.99998% efficient at .01 micron, with anti-re-entrainment layer for low oil carryover Port Size Range: 1/4” NPT to 6” ASA (150#) Flange Flow Range: 20 scfm to 3000 scfm @ 100 PSI Applications: Generally used in mainlines or at point of use, where oil and/or fine particulate capture is required and where water is not present in any appreciable quantity.

Oil Extractor® Description: RTi patented inverse flow filter-dryer with (4) stage filter packing, including an activated carbon packing backed by a cotton/polyester packing. Excellent water, dirt & oil aerosol capture to 1 micron. Port Size Range: 1/2” NPT to 1” NPT Flow Range: 60 scfm to 150 scfm @ 100 PSI Applications: Generally used at point of use and in heavy duty service where heavy water, dirt & oil removal is needed. Usually used in combination with coalescer (see below) to get the higher efficiency filtration (to .01 micron) to eliminate any carbon migration that may occur.

Oil Extractor® Combo Description: (2) stage assembly which adds a high efficiency 0.01 micron Coalescer behind an Oil Extractor® to give the best oil and fine particulate capture, in addition to the heavy water removal. 99.99998% efficient at .01 micron and to .003 ppm Port Size Range: 1/2” NPT to 1” ASA (150#) Flange Flow Range: 60 scfm to 150 scfm @ 100 PSI Applications: Generally used at point of use where heavy water, dirt, oil & oil aerosol removal is needed such as direct or indirect food contact applications, spraying applications, video jet applications, etc.

Choosing the Right RTi Filter: An Overview of Product Lines

a

Water & Dirt (High SCFM)...........................Oil.................................................................Water, Dirt & Oil (High SCFM).....................Water & Dirt.................................................Water, Dirt, & Oil..........................................Water, Dirt, Odor & Light Oil.......................Water, Dirt, Odor & Heavy Oil.....................Water Vapor to 35 to 39°F Dew Point.......Water, Water Vapor, Dirt -40°F Dew PointPrecise Air Regulation.................................Consistent Lubrication................................FDA Specified Housings..............................316 Stainless Steel Housings....................High Air Pressure/Natural Gas Units..........

Solution Problem/Specification

Eliminex High Flow SeparatorCoalescers

Eliminex High Flow Combo Units Eliminizer Filter/Dryers

Eliminizer Filter/Dryer Combo Units Oil-Extractors

Oil Extractor Combo UnitsRefrigerated Dryers

Desiccant Dryers RegulatorsLubricators

Food Grade UnitsStainless Steel UnitsHigh Pressure Units

Page

Application Guide

12081417272945314649333842

(800) 521-9200 PDF available www.driair.com

*Not all models available in every size, consult factory for details

b

(800) 521-9200 PDF available www.driair.com 1

60 scfm Eliminex®

Description Part Number

Replacement Element 1P-060Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N32-95-205Bowl Assy: Metal Bowl & Auto Float Drain N34-95-201Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-163Bowl Assy: Poly Bowl & Auto Float Drain N32-15-164Manual Petcock Drain PC-02Automatic Plastic Float Drain (Metal Bowl) N32-95-979Automatic Brass Float Drain (Poly Bowl) N32-95-978

Bowl O-ring N32-95-257

Port Size Metal Bowl Poly Bowl

Manual BrassPetcock Drain

1/4” 1P-060-M02-P 1P-060-P02-P3/8” 1P-060-M03-P 1P-060-P03-P1/2” 1P-060-M04-P 1P-060-P04-P

AutomaticFloat Drain

1/4” 1P-060-M02-F 1P-060-P02-F3/8” 1P-060-M03-F 1P-060-P03-F1/2” 1P-060-M04-F 1P-060-P04-F

Height (in.)(M/P) Width (in.) Depth (in.)

10 3.8 3.810 3.8 3.810 3.8 3.8

10.5 3.8 3.810.5 3.8 3.810.5 3.8 3.8

WaterDirt

OilOil Vapor

Odor

Port Sizes ¼”, ⅜”, ½”Thread Styles NPT, BSPT, BSPPFlow Capacity 60 scfm @ 100 PSIFilter Capacity 3.0 Micron & largerDifferential Pressure < 1.5 PSID

at rated flowMax Temp/Pressure:Aluminum Bowl

175°F/200 PSIG

Max Temp/Pressure:Polycarbonate Bowl

125°F/150 PSIG

Approx. Weight (lb.) 3.5

To add indicator, add “i” to end of part number *Indicator adds about 1.5” to height

Replacement Parts & AccessoriesSpecifications

Physical DimensionsOrder Guide

For higher pressure applications, consult factory. If unit is equipped with differential pressure indicator, max temperature and pressure are 125°F and 150 PSIG regardless of bowl material.


90 scfm Eliminex®








175°F/200 PSIG


125°F/150 PSIG



Replacement Parts & Accessories



WaterDirt

OilOil Vapor

Odor





16.75/14 3.8 3.816.75/14 3.8 3.816.75/14 3.8 3.8

17.5/14.5 3.8 3.817.5/14.5 3.8 3.817.5/14.5 3.8 3.8


120/150 scfm Eliminex®



1/2” 1P-120-M04-P 1P-120-P04-P3/4” 1P-120-M06-P 1P-120-P06-P

1” 1P-120-M08-P 1P-120-P08-P1/2” 1P-150-M04-P 1P-150-M04-P3/4” 1P-150-M06-P 1P-150-M06-P

1” 1P-150-M08-P 1P-150-M08-P


1/2” 1P-120-M04-F 1P-120-P04-F3/4” 1P-120-M06-F 1P-120-P06-F

1” 1P-120-M08-F 1P-120-P08-F1/2” 1P-150-M04-F 1P-150-P04-F3/4” 1P-150-M06-F 1P-150-P06-F

1” 1P-150-M08-F 1P-150-P08-F


16.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.6

17.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.6

WaterDirt

OilOil Vapor

Odor

Port Sizes ½”, ¾”, 1”Thread Styles NPT, BSPT, BSPPFlow Capacity 120 scfm @ 100 PSI

150 scmf @ 100 PSIFilter Capacity 3.0 Micron & largerDifferential Pressure < 1.5 PSID


175°F/200 PSIG


125°F/150 PSIG







Replacement Element 1P-120/1P-150Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N34-15-180Bowl Assy: Metal Bowl & Auto Float Drain N34-15-178Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-167Bowl Assy: Poly Bowl & Auto Float Drain N32-15-166Manual Petcock Drain PC-03Automatic Plastic Float Drain (Metal Bowl) N32-95-979Automatic Brass Float Drain (Poly Bowl) N32-95-978






1/2” 1P-175-M04-P 1P-175-P04-P3/4” 1P-175-M06-P 1P-175-P06-P

1” 1P-175-M08-P 1P-175-P08-P1/2” 1P-250-M04-P 1P-250-M04-P3/4” 1P-250-M06-P 1P-250-M06-P

1” 1P-250-M08-P 1P-250-M08-P


1/2” 1P-175-M04-F 1P-175-P04-F3/4” 1P-175-M06-F 1P-175-P06-F


1” 1P-250-M08-F 1P-250-P08-F


16.75/15 4.6 4.616.75/15 4.6 4.616.75/15 4.6 4.616.75/15 4.6 4.616.75/15 4.6 4.616.75/15 4.6 4.6

17.5/15.5 4.6 4.617.5/15.5 4.6 4.617.5/15.5 4.6 4.617.5/15.5 4.6 4.617.5/15.5 4.6 4.617.5/15.5 4.6 4.6

WaterDirt

OilOil Vapor

Odor




175°F/200 PSIG


125°F/150 PSIG












Replacement Element 1M-300/1M-400Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Manual Drain, Ball Valve BV-051Automatic Float Drain N32-95-XD8Bowl O-ring N32-F35-OR

Port Size Metal Bowl


1¼” 1M-300-M10-P1½” 1M-300-M12-P2” 1M-300-M16-P

1¼” 1M-400-M10-P1½” 1M-400-M12-P2” 1M-400-M16-P

Automatic PlasticFloat Drain

1¼” 1M-300-M10-F1½” 1M-300-M12-F1” 1M-300-M16-F

1¼” 1M-400-M10-F1½” 1M-400-M12-F1” 1M-400-M16-F

Height (in.) Width (in.) Depth (in.)

21 7.8 7.821 7.8 7.821 7.8 7.826 8.5 8.526 8.5 8.526 8.5 8.5

26 7.8 7.826 7.8 7.826 7.8 7.833 8.5 8.533 8.5 8.533 8.5 8.5

WaterDirt

OilOil Vapor

Odor

Port Sizes 1¼”, 1½”, 2”Thread Styles NPT, BSPT, BSPPFlow Capacity 300/400 scfm

@ 100 PSIFilter Capacity 3.0 Micron & largerDifferential Pressure < 1.5 PSID


175°F/200 PSIG

Approx. Weight (lb.) 29.0/30.0








Replacement Element 1M-700/1M-1200Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Manual Drain, Ball Valve BV-051Automatic Float Drain N32-95-XD8Bowl O-ring (700) N32-F35-ORBowl O-ring (1200) PHC-032



1¼” 1M-700-M10-P1½” 1M-700-M12-P2” 1M-700-M16-P3” 1M-1200-M24-P


1¼” 1M-700-M10-F1½” 1M-700-M12-F2” 1M-700-M16-F3” 1M-1200-M24-F


21 7.8 7.821 7.8 7.821 7.8 7.8

39.5 8.0 8.0

21 7.8 7.821 7.8 7.821 7.8 7.8

45.6 8.0 8.0

WaterDirt

OilOil Vapor

Odor

Port Sizes 1¼”, 1½”, 2”, 3”Thread Styles NPT, BSPT, BSPPFlow Capacity 700/1200 scfm



175°F/200 PSIG









Replacement Element 1X-2500/1X-5500Differential Pressure Indicator N32-P2-DPiManual Drain, Ball Valve BV-051External Float Drain N32-95-XD8



3” 1M-2500-MFD-P4” 1M-2500-MFE-P6” 1M-5500-MFF-P

ExternalFloat Drain

3” 1M-2500-MFD-X4” 1M-2500-MFE-X6” 1M-5500-MFF-X


41.5 18.5 1841.5 20 1853 20 18

46 18.5 1846 21 1858 24 18

WaterDirt

OilOil Vapor

Odor

Port Sizes 3”, 4”, 6” RFSOThread Styles Raised face 150# Flange

Flow Capacity 2500/5500 scfm @ 100 PSI

Filter Capacity 3.0 Micron & largerDifferential Pressure < 1.5 PSID

at rated flowMax Temp/Pressure:Epoxy Coated Carbon Steel

125°F/150 PSIG

Approx. Weight (lb.)

Indicator included standard with these metal bowl units



All 1M-2500 units require a minimum of 25” clearance between bottom of housing and floor for installation.All 1M-5500 units require a minimum of 36” clearance between bottom of housing and floor for installation.

Note:



60 scfm Eliminex® Combo


Replacement Element, 1st Stage 1P-060Replacement Element, 2nd Stage 3C-060Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N32-95-205Bowl Assy: Metal Bowl & Auto Float Drain N34-95-205Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-163Bowl Assy: Poly Bowl & Auto Float Drain N32-15-164Manual Petcock Drain PC-02Automatic Plastic Float Drain (Metal Bowl) N32-95-979Automatic Brass Float Drain N32-95-978Bowl O-ring N32-95-257


1/4” 1P-060-M02-DCP 1P-060-P02-DCP3/8” 1P-060-M03-DCP 1P-060-P03-DCP1/2” 1P-060-M04-DCP 1P-060-P04-DCP

1/4” 1P-060-M02-DC 1P-060-P02-DC3/8” 1P-060-M03-DC 1P-060-P03-DC1/2” 1P-060-M04-DC 1P-060-P04-DC


10 8 3.810 8 3.810 8 3.8

10.5 8 3.810.5 8 3.810.5 8 3.8

WaterDirtOil

Oil VaporOdor



175°F/200 PSIG


125°F/150 PSIG









1/2” 1P-090-M04-DCP 1P-090-P04-DCP3/4” 1P-090-M04-DCP 1P-090-P04-DCP

1” 1P-090-M08-DCP 1P-090-P08-DCP1/2” 1P-150-M04-DCP 1P-150-P04-DCP3/4” 1P-150-M06-DCP 1P-150-P06-DCP

1” 1P-150-M08-DCP 1P-150-P08-DCP


1/2” 1P-090-M04-DC 1P-090-P04-DC3/4” 1P-090-M06-DC 1P-090-P06-DC

1” 1P-090-M08-DC 1P-090-P08-DC1/2” 1P-150-M04-DC 1P-150-P04-DC3/4” 1P-150-M06-DC 1P-150-P06-DC

1” 1P-150-M08-DC 1P-150-P08-DC


18.75/15 10 4.618.75/15 10 4.618.75/15 10 4.618.75/15 10 4.618.75/15 10 4.618.75/15 10 4.6

17.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.6

WaterDirtOil

Oil VaporOdor


150 scfm @ 100 PSIFilter Capacity 0.01 Micron & largerDifferential Pressure < 2.5 PSID


175°F/200 PSIG


125°F/150 PSIG






90/150 scfm Eliminex® Combo


Replacement Element, 1st Stage 1P-090/1P-150Replacement Element, 2nd Stage 3C-090/3C-150Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N34-15-180Bowl Assy: Metal Bowl & Auto Float Drain N34-15-178Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-167

Bowl Assy: Poly Bowl & Auto Float Drain N32-15-166Manual Petcock Drain PC-03Automatic Plastic Float Drain (Metal Bowl) N32-95-979Automatic Brass Float Drain N32-95-978Bowl O-ring N32-95-256






1” 1P-175-M08-DCP 1P-175-P08-DCP1/2” 1P-250-M04-DCP 1P-250-M04-DCP3/4” 1P-250-M06-DCP 1P-250-M06-DCP

1” 1P-250-M08-DCP 1P-250-M08-DCP




1” 1P-250-M08-DC 1P-250-P08-DC


18.75/15 10 4.618.75/15 10 4.618.75/15 10 4.618.75/15 10 4.618.75/15 10 4.618.75/15 10 4.6

17.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.6




175°F/200 PSIG


125°F/150 PSIG






WaterDirtOil

Oil VaporOdor


Replacement Element, 1st Stage 1P-175/1P-250Replacement Element, 2nd Stage 3C-175/3C-250Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N34-15-180Bowl Assy: Metal Bowl & Auto Float Drain N34-15-178Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-167Bowl Assy: Poly Bowl & Auto Float Drain N32-15-166Manual Petcock Drain PC-03Automatic Plastic Float Drain (Metal Bowl) N32-95-979Automatic Brass Float Drain N32-95-978Bowl O-ring N32-95-256


300 /400 scfm Eliminex® Combo


Replacement Element, 1st Stage 1M-300/1M-400Replacement Element, 2nd Stage 3C-300/3C-400Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Manual Drain, Ball Valve BV-051Automatic Float Drain N32-95-XD8Bowl O-ring N32-F35-OR



1¼” 1M-300-M10-DCP1½” 1M-300-M12-DCP2” 1M-300-M16-DCP

1¼” 1M-400-M10-DCP1½” 1M-400-M12-DCP2” 1M-400-M16-DCP


1¼” 1M-300-M10-DC1½” 1M-300-M12-DC1” 1M-300-M16-DC

1¼” 1M-400-M10-DC1½” 1M-400-M12-DC1” 1M-400-M16-DC


21 16.5 7.821 16.5 7.821 16.5 7.826 18 8.526 18 8.526 18 8.5

26 16.5 7.826 16.5 7.826 16.5 7.833 18 8.533 18 8.533 18 8.5




175°F/200 PSIG






WaterDirtOil

Oil VaporOdor




Replacement Element 1M-700/1M-1200Replacement Element, 2nd Stage 3C-700/3C--1200Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Manual Drain, Ball Valve BV-051Automatic Float Drain N32-95-XD8Bowl O-ring (700) N32-F35-ORBowl O-ring (1200) PHC-032



1¼” 1M-700-M10-DCP1½” 1M-700-M12-DCP2” 1M-700-M16-DCP3” 1M-1200-M24-DCP


1¼” 1M-700-M10-DC1½” 1M-700-M12-DC2” 1M-700-M16-DC3” 1M-1200-M24-DC


21 16 7.821 16 7.821 16 7.8

39.5 18 8.0

21 16 7.821 16 7.821 16 7.8

45.5 18 8.0




175°F/200 PSIG






WaterDirtOil

Oil VaporOdor




Replacement Element 1X-2500/1X-5500Replacement Element 3C-1900/3C-3000Differential Pressure Indicator N32-P2-DPiManual Drain, Ball Valve BV-051External Float Drain N32-95-XD8



3” 1M-1900-MFD-DCP4” 1M-1900-MFE-DCP6” 1M-3000-MFF-DCP

ExternalFloat Drain

3” 1M-1900-MFD-DCX4” 1M-1900-MFE-DCX6” 1M-3000-MFF-DCX


68.5 47 21





125°F/150 PSIG





All 1900 scfm units require a minimum of 25” clearance between bottom of housing and floor for installation.All 3000 scfm units require a minimum of 36” clearance between bottom of housing and floor for installation.

Note:


WaterDirtOil

Oil VaporOdor


20 scfm Eliminizer®



1/4” 3P-020-M02-P 3P-020-P02-P3/8” 3P-020-M03-P 3P-020-P03-P


1/4” 3P-020-M02-F 3P-020-P02-F3/8” 3P-020-M03-F 3P-020-P03-F


6.8/6.8 3.0 3.06.8/6.8 3.0 3.0

6.8/6.8 3.0 3.0

6.8/6.8 3.0 3.0

Port Sizes ¼”, ⅜”Thread Styles NPT, BSPT, BSPPFlow Capacity 20 scfm @ 100 PSIFilter Capacity 1.0 Micron & largerDifferential Pressure < 5.0 PSID


175°F/200 PSIG


125°F/150 PSIG






WaterDirt

OilOil Vapor

Odor


Replacement Element 3P-020Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N32-95-178Bowl Assy: Metal Bowl & Auto Float Drain N32-95-950Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-159Bowl Assy: Poly Bowl & Auto Float Drain N32-15-160Manual Petcock Drain N32-95-182Automatic Plastic Float Drain (Metal Bowl) N32-95-973Bowl O-ring N32-95-009


35/60 scfm Eliminizer®



1/4” 3P-035-M02-P 3P-035-P02-P3/8” 3P-035-M03-P 3P-035-P03-P1/2” 3P-035-M04-P 3P-035-P04-P1/4” 3P-060-M02-P 3P-060-P02-P3/8” 3P-060-M03-P 3P-060-P03-P1/2” 3P-060-M04-P 3P-060-P04-P


1/4” 3P-035-M02-F 3P-035-P02-F3/8” 3P-035-M03-F 3P-035-P03-F1/2” 3P-035-M04-F 3P-035-P04-F1/4” 3P-060-M02-F 3P-060-P02-F3/8” 3P-060-M03-F 3P-060-P03-F1/2” 3P-060-M04-F 3P-060-P04-F


10 3.8 3.810 3.8 3.810 3.8 3.810 3.8 3.810 3.8 3.810 3.8 3.8

10.5 3.8 3.810.5 3.8 3.810.5 3.8 3.810.5 3.8 3.810.5 3.8 3.810.5 3.8 3.8

Port Sizes ¼”, ⅜”, ½”Thread Styles NPT, BSPT, BSPPFlow Capacity 35 scfm @ 100 PSI



175°F/200 PSIG


125°F/150 PSIG






WaterDirt

OilOil Vapor

Odor





90/150 scfm Eliminizer®



1/2” 3P-090-M04-P 3P-090-P04-P3/4” 3P-090-M06-P 3P-090-P06-P

1” 3P-090-M08-P 3P-090-P08-P1/2” 3P-150-M04-P 3P-150-P04-P3/4” 3P-150-M06-P 3P-150-P06-P

1” 3P-150-M08-P 3P-150-P08-P


1/2” 3P-090-M04-F 3P-090-P04-F3/4” 3P-090-M06-F 3P-090-P06-F


1” 3P-150-M08-F 3P-150-P08-F


16.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.6

17.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.6




175°F/200 PSIG


125°F/150 PSIG






WaterDirt

OilOil Vapor

Odor





20 scfm Eliminizer® Combo

WaterDirtOil

Oil VaporOdor

Port Sizes ¼”, ⅜”Thread Styles NPT, BSPT, BSPPFlow Capacity 20 scfm @ 100 PSIFilter Capacity 0.01 Micron & largerDifferential Pressure < 5.0 PSID


175°F/200 PSIG


125°F/150 PSIG





Replacement Element, 1st Stage 3P-020Replacement Element, 2nd Stage 3C-020Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N32-95-178Bowl Assy: Metal Bowl & Auto Float Drain N32-95-950Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-159Bowl Assy: Poly Bowl & Auto Float Drain N32-15-160Manual Petcock Drain N32-95-182Automatic Plastic Float Drain (Metal Bowl) N32-95-973Automatic Brass Float Drain (Poly Bowl) N32-95-973




1/4” 3P-020-M02-DCP 3P-020-P02-DCP

3/8” 3P-020-M03-DCP 3P-020-P03-DCP




6.8 7.0 3.06.8 7.0 3.0

6.8 7.0 3.0

6.8 7.0 3.0




35/60 scfm Eliminizer® Combo



1/4” 3P-035-M02-DCP 3P-035-P02-DCP3/8” 3P-035-M03-DCP 3P-035-P03-DCP1/2” 3P-035-M04-DCP 3P-035-P04-DCP1/4” 3P-060-M02-DCP 3P-060-P02-DCP3/8” 3P-060-M03-DCP 3P-060-P03-DCP1/2” 3P-060-M04-DCP 3P-060-P04-DCP


1/4” 3P-035-M02-DC 3P-035-P02-DC

3/8” 3P-035-M03-DC 3P-035-P03-DC1/2” 3P-035-M04-DC 3P-035-P04-DC1/4” 3P-060-M02-DC 3P-060-P02-DC3/8” 3P-060-M03-DC 3P-060-P03-DC1/2” 3P-060-M04-DC 3P-060-P04-DC


10 8 3.810 8 3.810 8 3.810 8 3.810 8 3.810 8 3.8

10.5 8 3.810.5 8 3.810.5 8 3.810.5 8 3.810.5 8 3.810.5 8 3.8

WaterDirtOil

Oil VaporOdor




175°F/200 PSIG


125°F/150 PSIG







Replacement Element, 1st Stage 3P-035/3P-060Replacement Element, 2nd Stage 3C-035/3C-060Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N34-95-205Bowl Assy: Metal Bowl & Auto Float Drain N34-95-201Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-163Bowl Assy: Poly Bowl & Auto Float Drain N32-15-164Manual Petcock Drain PC-03Automatic Plastic Float Drain (Metal Bowl) N32-95-979Automatic Brass Float Drain (Poly Bowl) N32-95-978



90/150 scfm Eliminizer® Combo





1” 3P-150-M08-DCP 3P-150-P08-DCP




1” 3P-150-M08-DC 3P-150-P08-DC


18.75/15 10 4.618.75/15 10 4.618.75/15 10 4.618.75/15 10 4.618.75/15 10 4.618.75/15 10 4.6

17.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.6

WaterDirtOil

Oil VaporOdor




175°F/200 PSIG


125°F/150 PSIG










20 scfm Coalescer


Manual BrassPetcock Drain 1/4” 3C-020-M02-P 3C-020-P02-P

AutomaticFloat Drain 1/4” 3C-020-M02-F 3C-020-P02-F


6.8 3.0 3.0

6.8 3.0 3.0

WaterDirtOil

Oil VaporOdor

Port Sizes ¼”Thread Styles NPT, BSPT, BSPPFlow Capacity 20 scfm @ 100 PSIFilter Capacity 0.01 Micron & largerDifferential Pressure < 1.5 PSID


175°F/200 PSIG


125°F/150 PSIG







Replacement Element 3C-020Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N32-95-178Bowl Assy: Metal Bowl & Auto Float Drain N32-95-950Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-159Bowl Assy: Poly Bowl & Auto Float Drain N32-15-160Manual Petcock Drain N32-95-182Automatic Plastic Float Drain (Metal Bowl) N32-95-973Bowl O-ring N32-95-009


35/60 scfm Coalescer



1/4” 3C-035-M02-P 3C-035-P02-P3/8” 3C-035-M03-P 3C-035-P03-P1/2” 3C-035-M04-P 3C-035-P04-P1/4” 3C-060-M02-P 3C-060-P02-P3/8” 3C-060-M03-P 3C-060-P03-P1/2” 3C-060-M04-P 3C-060-P04-P


1/4” 3C-035-M02-F 3C-035-P02-F3/8” 3C-035-M03-F 3C-035-P03-F1/2” 3C-035-M04-F 3C-035-P04-F1/4” 3C-060-M02-F 3C-060-P02-F3/8” 3C-060-M03-F 3C-060-P03-F1/2” 3C-060-M04-F 3C-060-P04-F


10 3.8 3.810 3.8 3.810 3.8 3.810 3.8 3.810 3.8 3.810 3.8 3.8

10.5 3.8 3.810.5 3.8 3.810.5 3.8 3.810.5 3.8 3.810.5 3.8 3.810.5 3.8 3.8




175°F/200 PSIG


125°F/150 PSIG






WaterDirtOil

Oil VaporOdor


Replacement Element 3C-035/3C-060Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N34-95-205Bowl Assy: Metal Bowl & Auto Float Drain N34-95-201Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-163Bowl Assy: Poly Bowl & Auto Float Drain N32-15-164Manual Petcock Drain PC-02Automatic Plastic Float Drain (Metal Bowl) N32-95-979Automatic Brass Float Drain (Poly Bowl) N32-95-978






1/2” 3C-090-M04-P 3C-090-P04-P3/4” 3C-090-M06-P 3C-090-P06-P

1” 3C-090-M08-P 3C-090-P08-P1/2” 3C-150-M04-P 3C-150-P04-P3/4” 3C-150-M06-P 3C-150-P06-P

1” 3C-150-M08-P 3C-150-P08-P

Automatic Float Drain

1/2” 3C-090-M04-F 3C-090-P04-F3/4” 3C-090-M06-F 3C-090-P06-F

1” 3C-090-M08-F 3C-090-P08-F1/2” 3C-150-M04-F 3C-150-P04-F3/4” 3C-150-M06-F 3C-150-P06-F

1” 3C-150-M08-F 3C-150-P08-F


16.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.6

17.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.6




175°F/200 PSIG


125°F/150 PSIG






WaterDirtOil

Oil VaporOdor


Replacement Element 3C-090/3C-150Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N34-15-180Bowl Assy: Metal Bowl & Auto Float Drain N34-15-178Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-167Bowl Assy: Poly Bowl & Auto Float Drain N32-15-166Manual Petcock Drain PC-03Automatic Plastic Float Drain (Metal Bowl) N32-95-979Automatic Brass Float Drain (Poly Bowl) N32-95-978



WaterDirtOil

Oil VaporOdor


Replacement Element 3C-250Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N34-15-180Bowl Assy: Metal Bowl & Auto Float Drain N34-15-178Manual Petcock Drain PC-03Automatic Float Drain N32-95-979Bowl O-ring N32-95-256



½ 3C-250-M04-P¾ 3C-250-M06-P1” 3C-250-M08-P


1¼” 3C-250-M04-F1½” 3C-250-M06-F1” 3C-250-M08-F


16.75 4.6 4.616.75 4.6 4.616.75 4.6 4.6

17.5 4.6 4.617.5 4.6 4.617.5 4.6 4.6

Port Sizes ½”, ¾”, 1”Thread Styles NPT, BSPT, BSPPFlow Capacity 250 scfm



175°F/200 PSIG





WaterDirtOil

Oil VaporOdor

250 scfm Coalescer




Replacement Element 3C-300/3C-400Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Manual Drain, Ball Valve BV-051Automatic Float Drain N32-95-XD8Bowl O-ring N32-F35-OR



1¼” 3C-300-M10-P1½” 3C-300-M12-P2” 3C-300-M16-P

1¼” 3C-400-M10-P1½” 3C-400-M12-P2” 3C-400-M16-P


1¼” 3C-300-M10-F1½” 3C-300-M12-F1” 3C-300-M16-F

1¼” 3C-400-M10-F1½” 3C-400-M12-F1” 3C-400-M16-F


21 7.8 7.821 7.8 7.821 7.8 7.826 7.8 7.826 7.8 7.826 7.8 7.8

26 7.8 7.826 7.8 7.826 7.8 7.833 7.8 7.833 7.8 7.833 7.8 7.8




175°F/200 PSIG





WaterDirtOil

Oil VaporOdor




Replacement Element 3C-700/3C-1200Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020

Manual Drain, Ball Valve BV-051Automatic Float Drain N32-95-XD8Bowl O-ring (700) N32-F35-ORBowl O-ring (1200) PHC-032



1¼” 3C-700-M10-P1½” 3C-700-M12-P2” 3C-700-M16-P3” 3C-1200-M24-P


1¼” 3C-700-M10-F1½” 3C-700-M12-F2” 3C-700-M16-F3” 3C-1200-M24-F


39.5 8.0 8.0

45 8.0 8.0




175°F/200 PSIG






WaterDirtOil

Oil VaporOdor




Replacement Element 3C-1900/3C-3000Differential Pressure Indicator N32-P2-DPiManual Drain, Ball Valve BV-051External Float Drain N32-95-XD8



3” 3C-1900-MFD-P4” 3C-1900-MFE-P6” 3C-3000-MFF-P

ExternalFloat Drain

3” 3C-1900-MFD-X4” 3C-1900-MFE-X6” 3C-3000-MFF-X


WaterDirtOil

Oil VaporOdor





125°F/150 PSIG





All 3C-1900 units require a minimum of 25” clearance between bottom of housing and floor for installation.All 3C-3000 units require a minimum of 36” clearance between bottom of housing and floor for installation.

Note:



60 scfm Oil-Extractor







10 3.8 3.810 3.8 3.810 3.8 3.8

10.5 3.8 3.810.5 3.8 3.810.5 3.8 3.8

WaterDirt

Light OilOil Vapor

Odor

Port Sizes ¼”, ⅜”, ½”Thread Styles NPT, BSPT, BSPPFlow Capacity 60 scfm @ 100 PSIFilter Capacity 1.0 Micron & larger

Activated Carbon OilAbsorption to 0.003 ppm

Differential Pressure < 3.0 PSID at rated flow

Max Temp/Pressure:Aluminum Bowl

175°F/200 PSIG


125°F/150 PSIG










90/150 scfm Oil-Extractor



1/2” 4P-090-M04-P 4P-090-P04-P3/4” 4P-090-M06-P 4P-090-P06-P

1” 4P-090-M08-P 4P-090-P08-P1/2” 4P-150-M04-P 4P-150-P04-P3/4” 4P-150-M06-P 4P-150-P06-P

1” 4P-150-M08-P 4P-150-P08-P


1/2” 4P-090-M04-F 4P-090-P04-F3/4” 4P-090-M06-F 4P-090-P06-F


1” 4P-150-M08-F 4P-150-P08-F


16.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.616.75/14 4.6 4.6

17.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.617.5/14.5 4.6 4.6


150 scfm @ 100 PSIFilter Capacity 1.0 Micron & larger




175°F/200 PSIG


125°F/150 PSIG






WaterDirt

Light OilOil Vapor

Odor





60 scfm Oil-Extractor Combo



1/4” 4P-060-M02-DCP 4P-060-P02-DCP3/8” 4P-060-M03-DCP 4P-060-P03-DCP1/2” 4P-060-M04-DCP 4P-060-P04-DCP

Automatic Float Drain

1/4” 4P-060-M02-DC 4P-060-P02-DC3/8” 4P-060-M03-DC 4P-060-P03-DC1/2” 4P-060-M04-DC 4P-060-P04-DC


10 8 3.810 8 3.810 8 3.8

10.5 8 3.810.5 8 3.810.5 8 3.8





175°F/200 PSIG


125°F/150 PSIG






WaterDirt

Heavy OilOil Vapor

Odor


Replacement Element, 1st Stage 4P-060Replacement Element, 2nd Stage 3C-060Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: Metal Bowl & Manual Petcock Drain N34-95-205Bowl Assy: Metal Bowl & Auto Float Drain N32-95-201Bowl Assy: Poly Bowl & Manual Petcock Drain N32-15-163Bowl Assy: Poly Bowl & Auto Float Drain N32-15-164Manual Petcock Drain PC-03Automatic Plastic Float Drain (Metal Bowl) N32-95-979Automatic Brass Float Drain (Poly Bowl) N32-95-978



90/150 scfm Oil-Extractor Combo

WaterDirt

Heavy OilOil Vapor

Odor





1” 4P-150-M08-DCP 4P-150-P08-DCP




1” 4P-150-M08-DC 4P-150-P08-DC


18.75/15 10 4.618.75/15 10 4.618.75/15 10 4.618.75/15 10 4.618.75/15 10 4.618.75/15 10 4.6

17.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.617.5/14.5 10 4.6


150 scfm @ 100 PSIFilter Capacity 1.0 Micron & larger




175°F/200 PSIG


125°F/150 PSIG










Eliminator II Desiccant Dryers


Replacement Element, 1st Stage 4P-060Replacement Element, 2nd Stage DE401Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: 1st Stage N34-95-201Bowl : 2nd Stage N34-15-180O-ring: 1st Stage N32-95-257O-ring: 2nd Stage N32-95-256Automatic Float Drain: 1st Stage N32-95-979


1/4” Regulator & Gauge Assembly

1/4” E4000-23/8” E4000-31/2” E4000-4

No Regulator & Gauge Assembly

1/4” N4000-23/8” N4000-31/2” N4000-4


19.0 17 4.719.0 17 4.719.0 17 4.7

19.0 14 4.719.0 14 4.719.0 14 4.7





100°F/150 PSIG






E6000/E8000 Desiccant Dryer


Replacement Element, 1st Stage 4P-090Replacement Element, 2nd Stage DE6000Replacement Element, 3rd Stage DE6000Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy: 1st Stage N34-15-178Bowl Assy: 2nd /3rd Stage N34-15-180O-ring: 1st Stage N32-95-257O-ring: 2nd/3rd Stage N32-95-256Automatic Float Drain: 1st Stage N32-95-979Manual Brass Drain: 2nd/3rd Stage PC-03Replacement Regulator (E6000) NAR5000-N06Replacement Regulator (E8000) NAR5000-N10Replacement Gauge KSG-008

Port Size

E6000 3/4”E8000 1”


19 30 519 30 5

Port Sizes ¾”, 1”Thread Styles NPT, BSPT, BSPPFlow Capacity 25 scfm @ 100 PSIFilter Capacity 1.0 Micron & larger




100°F/150 PSIG






Food Grade: Eliminex & Eliminex Combo

Special food grade certified non-toxic powder-coated filters meet the requirements of 21 CFR 100 while the coating ingredients meet at least one section of FDA Title 21, with the exception of food items containing 8% alcohol. For more information or special applications, please consult factory.


Replacement Element, 1st Stage 1P-060/1P-090/1P-150

Replacement Element, 2nd Stage (Combo Unit) 3C-060/3C-090/3C-150

Differential Pressure Indicator N32-W1-DPI-FGBlanking Cap (Cover for Indicator) N32-95-020-FGBowl Assy: Metal Bowl & Manual Petcock Drain (60)

Bowl Assy: Metal Bowl & Auto Float Drain (60)

Bowl Assy: Metal Bowl & Manual Petcock Drain (90/150)

Bowl Assy: Metal Bowl & Auto Float Drain (90/150)

Manual Petcock Drain PC-02Automatic Float Drain N32-95-979-FGBowl O-ring (60) N32-95-257Bowl O-ring (90/150) N32-95-256



3/8” 1P-060-F03-P1/2” 1P-060-F04-P3/4” 1P-090-F06-P

1” 1P-150-F08-P

Manual BrassPetcock Drain COMBO

3/8” 1P-060-F03-DCP1/2” 1P-060-F04-DCP3/4” 1P-090-F06-DCP

1” 1P-150-F08-DCP


3/8” 1P-060-F03-F1/2” 1P-060-F04-F3/4” 1P-090-F06-F

1” 1P-150-F08-F

Automatic PlasticFloat Drain COMBO

3/8” 1P-060-F03-DC1/2” 1P-060-F04-DC3/4” 1P-090-F06-DC

1” 1P-150-F08-DC

Height(in.) Width (in.) Depth (in.)

10 3.8 3.810 3.8 3.8

18.75 4.6 4.618.75 4.6 4.6

10 8 3.810 8 3.8

18.75 10 4.618.75 10 4.6

10.5 3.8 3.810.5 3.8 3.817.5 4.6 4.617.5 4.6 4.610.5 8 3.810.5 8 3.817.5 10 4.617.5 10 4.6

Port Sizes ⅜”, ½”, ¾”, 1”Thread Styles NPT, BSPT, BSPPFlow Capacity 60 scfm @ 100 PSI

90 scfm @ 100 PSI150 scfm @ 100 PSI

Filter Capacity 1.0 Micron & largerActivated Carbon OilAbsorption to 0.003 ppm



175°F/200 PSIG

Approx. Weight (lb.) 3.5/6.0-7.0/12.0





Food Grade: Eliminizer & Eliminizer Combo












3/8” 3P-060-F03-P1/2” 3P-060-F04-P3/4” 3P-090-F06-P

1” 3P-150-F08-P



1” 3P-150-F08-DCP


3/8” 3P-060-F03-F1/2” 3P-060-F04-F3/4” 3P-090-F06-F

1” 3P-150-F08-F


3/8” 3P-060-F03-DC1/2” 3P-060-F04-DC3/4” 3P-090-F06-DC

1” 3P-150-F08-DC






175°F/200 PSIG

Approx. Weight (lb.) 3.5/6.0-7.0/12.0





10 3.8 3.810 3.8 3.8

18.75 4.6 4.618.75 4.6 4.6

10 8 3.810 8 3.8

18.75 10 4.618.75 10 4.6

10.5 3.8 3.810.5 3.8 3.817.5 4.6 4.617.5 4.6 4.610.5 8 3.810.5 8 3.817.5 10 4.617.5 10 4.6


Food Grade: Oil-Extractor & Oil-Extractor Combo












3/8” 4P-060-F03-P1/2” 4P-060-F04-P3/4” 4P-090-F06-P

1” 4P-150-F08-P



1” 4P-150-F08-DCP


3/8” 4P-060-F03-F1/2” 4P-060-F04-F3/4” 4P-090-F06-F

1” 4P-150-F08-F


3/8” 4P-060-F03-DC1/2” 4P-060-F04-DC3/4” 4P-090-F06-DC

1” 4P-150-F08-DC


90 scfm @ 100 PSI150 scfm 100 PSI




175°F/200 PSIG

Approx. Weight (lb.) 3.5/6.0-7.0/12.0





10 3.8 3.810 3.8 3.8

18.75 4.6 4.618.75 4.6 4.6

10 8 3.810 8 3.8

18.75 10 4.618.75 10 4.6

10.5 3.8 3.810.5 3.8 3.817.5 4.6 4.617.5 4.6 4.610.5 8 3.810.5 8 3.817.5 10 4.617.5 10 4.6




Replacement Element 3C-060/3C-090/3C-150







Food GradeCoalescers-

Manual Drain

3/8” 3C-060-F03-P1/2” 3C-060-F04-P3/4” 3C-090-F06-P

1” 3C-150-F08-P

Food GradeCoalescers-Auto Drain

3/8” 3C-060-F03-F1/2” 3C-060-F04-F3/4” 3C-090-F06-F

1” 3C-150-F08-F


10 3.8 3.810 3.8 3.8

18.75 4.6 4.618.75 4.6 4.610.5 3.8 3.810.5 3.8 3.817.5 4.6 4.617.5 4.6 4.6

Port Sizes ⅜”, ½”, ¾”, 1”Thread Styles NPTFlow Capacity 60 scfm @ 100 PSI




125°F/150 PSIG





Food Grade: Coalescer


Food Grade: Eliminator II Desiccant Dryer


Replacement Element, 1st Stage 4P-090Replacement Element, 2nd Stage DE401Differential Pressure Indicator N32-W1-DPIBlanking Cap (Cover for Indicator) N32-95-020Bowl Assy w/Drain: 1st StageBowl: 2nd StageO-ring: 1st Stage N32-95-257O-ring: 2nd Stage N32-95-256Automatic Float Drain: 1st Stage N32-95-979


Food Grade 1/2” FG4000


19 17 4.7

Port Sizes ½”Thread Styles NPT, BSPT, BSPPFlow Capacity 10 scfm @ 100 PSIFilter Capacity 1.0 Micron & larger




100°F/150 PSIG







Stainless Steel: Eliminex & Eliminex Combo

316 Stainless Steel




Bowl Assy: Metal Bowl & Manual Petcock DrainBowl Assy: Metal Bowl & Auto Float DrainManual Petcock Drain PC-03Automatic Float Drain N32-95-979-FGBowl O-ring (60) N32-95-147Bowl O-ring (90/150) KSG-176



1/2” 1P-060-S04-P1” 1P-150-S08-P


1/2” 1P-060-S04-DCP

1” 1P-150-S08-DCP


1/2” 1P-060-S04-F1” 1P-150-S08-F


1/2” 1P-060-S04-DC1” 1P-150-S08-DC


10 8 3.818.75 8 3.8

10 10 4.6

18.75 10 4.6

10.5 8 3.817.5 8 3.8

10.5 10 4.6

17.5 10 4.6

Port Sizes ½”(60), 1” (90/150)Thread Styles NPT, BSPT, BSPP

Flow Capacity 60 scfm @ 100 PSI90 scfm @ 100 PSI150 scfm @ 100 PSI

Filter Capacity 3.0+ (Eliminizer)0.01+ (Combo Units)


Max Temp/Pressure:Manual Drain

150°F/250 PSIG

Max Temp/Pressure:Auto Float Drain

125°F/150 PSIG

Approx. Weight (lb.) 6.0/9.0-12.0/18.0




Stainless Steel: Eliminizer & Eliminizer Combo

316 Stainless Steel







1/2” 3P-060-S04-P1” 3P-150-S08-P


1/2” 3P-060-S04-DCP

1” 3P-150-S08-DCP


1/2” 3P-060-S04-F1” 3P-150-S08-F


1/2” 3P-060-S04-DC1” 3P-150-S08-DC



Filter Capacity 1.0+ (Eliminizer)0.01+ (Combo Units)



150°F/250 PSIG


125°F/150 PSIG

Approx. Weight (lb.) 6.0/9.0-12.0/18.0


Physical DimensionsOrder GuideHeight

(in.) Width (in.) Depth (in.)

10 8 3.818.75 8 3.8

10 10 4.6

18.75 10 4.6

10.5 8 3.817.5 8 3.8

10.5 10 4.6

17.5 10 4.6


Stainless Steel: Oil-Extractor & Oil-Extractor Combo

316 Stainless Steel







1/2” 4P-060-S04-P1” 4P-150-S08-P


1/2” 4P-060-S04-DCP

1” 4P-150-S08-DCP


1/2” 4P-060-S04-F1” 4P-150-S08-F


1/2” 4P-060-S04-DC1” 4P-150-S08-DC



Filter Capacity 1.0+ (Single Stage)0.01+ (Combo Units)Activated Carbon Oil Absorption to 0.003 ppm



150°F/250 PSIG


125°F/150 PSIG

Approx. Weight (lb.) 6.0/9.0-12.0/18.0




10 8 3.818.75 8 3.8

10 10 4.6

18.75 10 4.6

10.5 8 3.817.5 8 3.8

10.5 10 4.6

17.5 10 4.6


Stainless Steel: Coalescers

316 Stainless Steel


Replacement Element, 1st Stage 3C-060/3C-0903C-150/3C-250

Bowl Assy: Metal Bowl & Manual Petcock DrainBowl Assy: Metal Bowl & Auto Float DrainManual Petcock Drain PC-03Automatic Float Drain N32-95-979-FGBowl O-ring (60) N32-95-147Bowl O-ring (90/150/250) KSG-176



1/2” 3C-060-S04-P3/4” 3C-090-S06-P

1” 3C-150-S08-P1” 3C-250-S08-P


1/2” 3C-060-S04-F3/4” 3C-090-S06-F

1” 3C-150-S08-F1” 3C-250-S08-F

Port Sizes ½”(60) ¾”, 1” (90/150/250)

Thread Styles NPT, BSPT, BSPP

Flow Capacity 60 scfm @ 100 PSI90 scfm @ 100 PSI150 scfm @ 100 PSI250 scfm@ 100 PSI

Filter Capacity 0.01 micron & larger



150°F/250 PSIG


125°F/150 PSIG

Approx. Weight (lb.) 6.0/9.0-12.0/18.0




10 3.8 3.810 3.8 3.8

18.75 4.6 4.618.75 4.6 4.6

10.5 3.8 3.810.5 3.8 3.817.5 4.6 4.617.5 4.6 4.6


High Pressure: Eliminex & Eliminex Combo




Bowl Assy: Metal Bowl & Manual Petcock DrainManual Petcock Drain PC-03Bowl O-ring (60) N32-95-147Bowl O-ring (90/150) KSG-176



1/2” 1P-060-M04-PHP3/4” 1P-120-M06-PHP

1” 1P-175-M08-PHP


1/2” 1P-060-M04-DCHP

3/4” 1P-120-M06-DCHP1” 1P-175-M08-DCHP


10.2 3.1 3.115.4 4.7 4.715.4 4.7 4.710.2 7.2 3.115.4 10.2 4.715.4 10.2 4.7

Port Sizes ½”, ¾”, 1” Thread Styles NPT, BSPT, BSPP


Filter Capacity 3.0 micron and larger0.01+ (Combo Units)


Max Temp/Pressure:Metal HP Housing

200°F/500 PSIG

Approx. Weight (lb.) 2.0/4.0-4.0/8.0




High Pressure: Eliminizer & Eliminizer Combo







1/2” 1P-060-M04-PHP3/4” 1P-120-M06-PHP

1” 1P-175-M08-PHP


1/2” 1P-060-M04-DCHP

3/4” 1P-120-M06-DCHP1” 1P-175-M08-DCHP




Filter Capacity 3.0 micron and larger0.01+ (Combo Units)


Max Temp/Pressure:Metal HP Housing

200°F/500 PSIG

Approx. Weight (lb.) 2.0/4.0-4.0/8.0




High Pressure: Coalescer






1/2” 3C-060-M04-PHP3/4” 3C-150-M06-PHP

1” 3C-150-M08-PHP



Flow Capacity 60 scfm @ 100 PSI150 scfm @ 100 PSI

Filter Capacity 0.01 micron and largerDifferential Pressure < 3.0 PSID

at rated flowMax Temp/Pressure:Metal HP Housing

200°F/500 PSIG





Refrigerated Dryers

Call factory for various power supply options for each model as well as information on non-cyling models

· 20-2000 scfm depending on model

· Port sizes 1/4” - 4”

· Maximum work 230 PSIG

· Maximum temperature 158°F

· Maintains constant 38°F dew point

· Unique energy efficient cycling dryer reduces costs up to 80%

· Compact size for easy fit

· Automatic timer drain (w/manual override)

· Low maintenance, long life design

· On/Off switch with multi-function display

Features & Benefits

Specifications

Hei

ght

Width Depth

Model Air Flow(scfm)

Air Connection(NPT)

Net Weight(lb)

Height(in)

Width(in)

Depth(in)

RD 0020 20 1/2” 80 20.10 20.90 11.80

RD 0030 30 1/2” 86 20.10 20.90 11.80

RD 0050 50 1/2” 91 20.10 20.90 11.80

RD 0075 75 3/4” 143 29.50 25.60 14.60

RD 0100 100 3/4” 148 29.50 25.60 14.60

RD 0125 125 1” 176 29.50 25.60 14.60

RD 0150 150 1” 209 33.50 30.70 14.60

RD 0175 175 1” 227 33.50 30.70 14.60

RD 0200 200 1-1/2” 368 37.00 30.70 28.90

RD 0250 250 1-1/2” 368 37.00 30.70 28.90

RD 0325 325 1-1/2” 416 37.00 30.70 28.90

RD 0425 425 2” 582 43.30 34.00 40.00

RD 0520 520 2” 646 43.30 34.00 40.00

RD 0600 600 2-1/2” 833 43.30 34.00 51.90

RD 0700 700 2-1/2” 866 43.30 34.00 51.90

RD 0800 700 2-1/2” 866 43.30 34.00 51.90

RD 1000 1000 3” 1598 61.70 37.90 62.60

RD 1200 1220 4” 1907 61.70 37.90 71.30

RD 1600 1600 4” 2513 81.70 34.10 88.00

RD 2000 2000 4” 3064 81.70 34.10 88.00


Piggyback Filter/Regulators

ReplacementElement Bowl Assy

Mounting Bracket(optional)

O-Ring

RT-F250 F250-E F250-BMD F250-BKT F250-ORRT-F380 F380-E F380-BMD F380-BKT F380-ORRT-F500 F500-E F500-BMD F500-BKT F500-ORRT-FR250 FR250-E F250-BMD F250-BKT F250-ORRT-FR380 FR380-E F380-BMD F380-BKT F380-ORRT-FR500 FR500-E F500-BMD F500-BKT F500-OR

Accessories & Replacement Parts:

RT-FR500-G

RT-F500

Filter/Regulator

Port Size(in)

Flow Capacity(scfm)

Filter Capacity

Height(in)

Depth(in)

Width(in)

RT-FR250-G 1/4” 30 5 micron+ 7.8 1.65 1.65RT-FR380-G 3/8” 80 5 micron+ 10.8 2.49 2.49RT-FR500-G 1/2” 80 5 micron+ 10.8 2.49 2.49

Filter Port Size(in)

Flow Capacity(scfm)

Filter Capacity

Height(in)

Depth(in)

Width(in)

RT-F250 1/4” 30 5 micron+ 7.8 1.65 1.65RT-F380 3/8” 80 5 micron+ 10.8 2.49 2.49RT-F500 1/2” 80 5 micron+ 10.8 2.49 2.49

• Filter with adjustable 0-120 PSI regulator

• Filter/Regulator with glass face chrome gauge

• Low pressure drop

• Can be wall mounted or panel nut mounted

• Low cost, high efficiency design

• Semi-automatic drain with manual override

• Filters to 5 micron

• Maximum pressure is 230 PSI

• Temperature range from 40°F to 120°F

• Polycarbonate construction


Heavy Duty Regulators

• Rugged, heavy duty high-flow design• All metal, corrosion-resistant anodized aluminum body• Tee handle knob, relieving type regulator• Chemically resistant Buna N diaphragm• Available with ¼”, ⅜”, ½”, ¾”, 1”, 1 ¼”, 1 ½” NPT ports

• Gauge included with unitsR500HD-G R1250HD-G

Part # Flow Capacity(scfm)

AdjustingRange

Pressure(psig)

Port Size

(NPT)

MaximumSupply

Pressure(psig)

MaximumOperating

Temp(°F)

Weight(lbs)

Dimensions(inches)

Diameter x Height

R250HD-G 86 10-130 1/4” 250 175 1.2 2.25 x 5.12R380HD-G 100 10-130 3/8” 250 175 1.2 2.25 x 5.12R500HD-G 108 10-130 1/2” 250 175 1.2 2.25 x 5.12R750HD-G 175 10-130 3/4” 250 175 3.2 3.75 x 6.75

R1000HD-G 300 10-130 1” 250 175 3.2 3.75 x 6.75R1250HD-G 450 10-130 1-¼” 250 175 3.9 4 x 6.75R1500HD-G 450 10-130 1-½” 250 175 3.9 4x 6.75

To order without gauge, omit ‘-G’ from the part number*Inlet pressure 100 PSIG (6.9 bar). Secondary pressure 80 PSIG (5.5 bar).


Mini Regulators & Replacement Gauges

Regulator & Gauge

Replacement Gauges

1/8” Regulatorw/0-30psi Gauge






1.5” Diameter Gauge, 0-60psi

1/8” Centered Back(FR Piggyback Series)

1.5” Diameter Gauge, 0-160psi

1/8” Centered Back(FR Piggyback Series)

2” Diameter Gauge, 0-160 psi, 1/8” BM

1.5” Diameter Gauge, 0-30 psi, 1/8” BM

1.5” Diameter Gauge, 0-60 psi, 1/8” BM

MR0060-01G

MR1060-02G

MR0030-01G

MR1030-02G

PG-060-1.5-CB PG-160-1.5-CB

PG-160PG-030-15C PG-060-15C

MR0120-01G

MR1120-02G


Standard & Heavy Duty Lubricators

• Rugged, heavy duty high-flow design• All metal, corrosion-resistant anodized aluminum body• Siphon tube filter provides clean lubricant downstream• Quick-disconnect clamp ring for easy bowl removal• Adjustable oil feed w/ tamper-proofing capability• Can be filled while under pressure• Available with ¼”, ⅜”, ½”, ¾”, 1” NPT portsL750HDM

L250 L380 L500

L1000HDM

Part # Flow

Maximum Supply

Pressure(psig)

Port Size

(NPT)

MaximumOperating

Temp(°F)

Weight(lbs)

Dimensions(inches)

Diameter x Height

L250HDM 40 0-250 1/4” 200 3.0 2.5 x 6.88L380HDM 100 0-250 3/8” 200 3.0 2.5 x 6.88L500HDM 120 0-250 1/2” 200 3.0 2.5 x 6.88L750HDM 190 0-250 3/4” 200 4.0 3.75 x 11.25

L1000HDM 270 0-250 1” 200 4.0 3.75 x 11.25

Part # Flow

Maximum Supply

Pressure(psig)

Port Size

(NPT)

MaximumOperating

Temp(°F)

Weight(lbs)

Diameter x Height

(in)

L250 30 0-230 1/4” 122 1.0L380 80 0-230 3/8” 122 1.0L500 80 0-230 1/2” 122 1.0

*Inlet pressure 100 PSIG (6.9 bar). Secondary pressure 80 PSIG (5.5 bar).


Standard Replacement Drains & Additional Drains

Standard Automatic Replacement Drains

Standard Manual Replacement Drains

Additional Drains

Auto Float, Brass

Auto Float, Plastic

¼” Petcock, Brass

Electronic Timer Drain

Auto Float, Brass/Plastic

⅜” Petcock Brass

Tank Drain

Auto Float, External

½”Ball Valve w/Handle

Magnetic Zero Loss Drain

N32-95-978N32-95-973

PC-02

ED-2-4

N32-95-979

PC-03

TD-5

N32-95-XD8

BV-051

MAG 11


Mounting Brackets & Pressure Indicators

Brackets Available:

Differential Pressure Indicator

20 SCFM OnlyWall Mounted

60 SCFM OnlyWall Mounted

(combo units req. 2)

½” Models OnlySupports units on pipe

Units can still rotate

¼”- 1” Units¼” x ½” slots

on 1½” centers

20 SCFM Only- Can be used to connect combo unit modularly

Differential pressure indicator used on most

models ¼”- 2” NPT

Blanking cap to replace indicator

N32-95-734

GPA-95-016

3P-020-M02-Fi mounted with GPA-95-016

3P-020-M02-Fi mounted with GPA-95-016

3P-020-M02-Fi mounted with N34-95-969

N32-W1-DPI N32-95-020

PB-004N34-95-969 BK-1

Examples:

Universal


0.01 Micron& Larger

Replacement Elements

1P-0601P-0901P-1201P-1501P-175

1M-3001M-4001M-700

1M-12001M-25001M-5500

3C-0203C-021*

3C-0603C-061*

3C-0903C-091*

3C-1503C-150*

3C-2503C-250*

3C-3003C-301*

3C-4003C-401*

3C-7003C-701*3C-1200

3C-1201*3C-19003C-3000

60 SCFM90 SCFM120 SCFM150 SCFM175 SCFM300 SCFM400 SCFM700 SCFM1200 SCFM2500 SCFM5500 SCFM

20 SCFM20 SCFM60 SCFM60 SCFM90 SCFM90 SCFM150 SCFM150 SCFM250 SCFM250 SCFM300 SCFM300 SCFM400 SCFM400 SCFM700 SCFM700 SCFM1200 SCFM1200 SCFM1900 SCFM3000 SCFM

3.0 Micron& Larger

Elements for Eliminex Units

Constructed of washable stainless steel mesh

Constructed of stainless steel mesh & cotton

Constructed of stainless steel mesh, cotton and activated carbon

Constructed of long lasting borosilicate material

Elements for Coalescing Units

20 SCFM35 SCFM60 SCFM90 SCFM150 SCFM

60 SCFM90 SCFM150 SCFM

3P-0603P-0903P-150

1.0 Micron & Larger

0.003 ppm& Larger

Elements for Eliminzer Units

Elements for Oil-Extractor Units

*Grade 1 Coalescing Element

(Grade 2 is standard)

Combo units have 2 replacement elements: 1st stage element (The first 5 characters in the model number) with a coordinating coalescing

element in the 2nd stage.

Elements are shown clear for demonstration only.

3C1P/1M

3P

4P

ie) 3P-060-M04-DCi

3P-060 + 3C-060


Grade 1 Coalescing Element

3C-0213C-0613C-0913C-1513C-2513C-3013C-4013C-701

3C-1201

20 scfm60 scfm90 scfm150 scfm250 scfm300 scfm400 scfm700 scfm1200 scfm

A finer grade coalescing element with a rating of 0.01 micron at 99.99998%

efficiency available in:

•Coalescer Units•Eliminex Combo Units•Eliminizer Combo Units•Oil-Extractor Combo Units

Product Line 20 35 60 90 150 250 300 400 700 1200 1900 3000

Eliminex Combo • • • • • • •

Eliminizer Combo • • • •

Oil-Extractor Combo • • • •

Coalscer • • • • • • • • •

• Available with grade 1 coalescing element

Reading Technologies, Inc.

Documents