Hydraulic Clamping Systems
Toggle Clamps mechanical and pneumatic
Zero-Point-Systems
Standard Clamping Elements
CLAMPING. SCREWING. LOCKING.Plus Service Guarantee
Certified
according
to ISO 9001
CLAMPING. SCREWING. LOCKING.Plus Service Guarantee
SERVICE-
GUARANTEE
SERVICE-
GUARANTEE
SERVICE-
GUARANTEE
Catalogue 2006/22GB
Multiple-Clamping System
Pneumatic Vice
ANDREAS MAIER GmbH & Co. KG Schloss- und Werkzeugfabrik
Home address: Waiblinger Straße 116 70734 Fellbach Germany
Post address: Postfach 17 60 70707 Fellbach Germany
E-mail: [email protected] Internet: www.amf.de WAP: wap.amf.de
UK Sales Office: Tony FORNSWORTH UK Sales Manager Phone: +44 (0) 1924 242 972 Fax: +44 (0) 1924 242 891 Mobile: +44 (0) 7976 942 421 E-mail: [email protected]
Cat. order no. 444125 – & 1,50
All sales are subject to our terms of sales and delivery. All rights for creation, photos and text are reserved for editor AMF. Photo-mechanical or any other reproduction on expressed permission only.
OF -/0.5/-/3.5/03/2006 Printed in Germany
Cat. order no. 444141 – & 1,50
All sales are subject to our terms of sales and delivery. All rights for creation, photos and text are reserved for editor AMF. Photo-mechanical or any other reproduction on expressed permission only.
OF -/0.5/-/3.5/03/2006 Printed in Germany
Service Guarantee
Dear Customers,
Since 1890, the name AMF has stood for reliability andthe highest quality. Today our product range comprisesmore than 5000 articles in the sectors clamping, handtools, and locks. That makes us a leading Europeanmanufacturer.
Outstanding products are only one side of the coin. Forus, it is just as important to provide our customers withperfect service, day in and day out. We laid the founda-tions for this in recent years with our modern TeamOrganisation. The service from your partner at AMF willbe quick, direct, and competent.
Our exceptional service has a name: the AMF ServiceGuarantee. It offers you five significant advantages – seethem for yourself on this page.
Hans-Günther MaierManaging DirectorANDREAS MAIER GmbH & Co. KG
We offer you confidence – five ways – in every aspect of our products. At AMF, the service is right too. You can rely on us. Guaranteed!
Real technical adviceMany tasks and a multitude of solutions. From AMFProfessional Products you can find the right way tosolve your problem – fast and reliably – either at yourlocal dealer or with the help of the specialist in ourteam. Just call us!
Short delivery timesFrom the AMF finished-product stores with over 5.000articles, we can supply 98 % of orders from stock. Andyou can be sure that every stock article ordered isdespatched the same day.
Certified qualityAMF stands for painstaking production in our own works.We have followed this tradition since 1890 – today, ofcourse, with a modern quality assurance system to ISO9001.
WarrantyWe believe in the high quality of our products.Complaints are dealt with quickly, unbureaucraticallyand generously – as far as possible, even well-beyondthe guarantee period.
Individual developmentYou cannot find the product you need? Talk to us; we will find the right solution for you – from a special version, right through to a completely new development.
Fiveways!Fiveways!
2
2006/22GB
CLAMPING AND FIXTURE SYSTEMS
1
2
3
4
5
Company history
1890: Company founded by AndreasMaier as a lock manufacturer.
1920: Production program extended toinclude spanners.
1928: Production-line assembly of“Fellbach locks”.
1951: With the introduction of clampingelements, AMF diversified into thefields of workpiece and tool clamping.
1965: Toggle clamps extend the AMF product range. AMF catalogues arenow published in ten languages.
1975: Hydraulic clamping marks furtherspecialisation.
1982: Clamping and fixture systems roundoff AMF comtetence in clamping.
1996: Introduction of the AMF TeamOrganisation in all business sectors.Quality assurance certified to ISO 9001.
2002: Introduction of the AMF Service Guarantee for all products.
2004: Launching of our new Zero-Point-System "ZPS".
2005: Launching of the Positioning System for Laser Marking.
Table of contentsNumber index see page 21
CLAMPING AND FIXTURE SYSTEMS 3
2006
/22G
B
4-5
6-7
8-11
12-13
14
99-109
20
Base elements
... about Multiple-Clamping System
Gripping jaws, Accessories
... about Pneumatic Vice
Base elements and Modular carrier
Gripping jaws
Accessories
Base jaws, Clamping jaws
15
16-19
Mul
tiple-
Clam
ping
Sys
tem
Pneu
mat
ic Vi
ce
4
2006/22GB
CLAMPING AND FIXTURE SYSTEMS
Specifications subject to change.
... about Multiple-Clamping System
Basic jaw,removable
gripping jaw, knurled forincreased clamping force
Threads for attachmentof stop parts
Gripping jaw, soft
1 mm serration Lateral stop
Support wedge
2 mm clampingstroke
Gripping jaw,smooth
Base
Clamping jaw
Clamping system for the multiple clamping of small items in series production on state-of-the-art NC andCNC tools used for drilling, milling, grinding and electrical discharge machining.
Benefits at a glance:
• High-precision multiple clamping device • Positive-fit attachment of clamping jaws
• Hardened steel (60 HRC) • Single-bolt clamping per clamping position
• Up to 16 clamping positions per work piece • 50 mm, 80 mm and 120 mm jaw width
• Simple and precise adjustment of clamping jaws • Modular design: Set-up for one or multiple thanks to serrated contact surfaces Work pieces as required
• Positioning increments of 1 mm • Work piece supports integrated in clamping jaws
• Scale at basic module and reference mark at • For use on machine tables, devices and the clamping jaws allow the positioning without quick-change systemsmeasuring and test equipment
SizeLength[mm]
Work-piece quantity
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Max. work-piece dimension [mm]
50
250 191 78 41 22 11
320 261 113 64 39 25 15 8
500 441 203 124 84 61 45 34 25 18 13 9
600 541 253 157 109 81 61 48 38 30 23 18 14 10
650 591 278 174 122 91 70 56 44 35 28 22 18 14 10
700 641 303 191 134 101 78 62 50 41 33 27 22 18 14 11 8
80
350 261 105 52 26 11
500 411 180 102 64 41 25 14
600 511 230 136 89 61 42 28 18 11
650 561 255 152 101 71 50 36 25 16
700 611 280 169 114 81 59 43 31 22 14
120500 381 158 83 46 24 9
600 481 208 117 71 44 26 13
700 581 258 150 96 64 42 27 15
Work-piece quantities for multiple clamping system:
... about Multiple-Clamping System
CLAMPING AND FIXTURE SYSTEMS 5
Specifications subject to change.
2006
/22G
B
Jaw width Attachment of basic jaws Attachment of clamping jaws
50 mm 2 x M 6, max. 25 Nm 2 x M 6, max. 20 Nm
80 mm 2 x M10, max. 30 Nm 2 x M10, max. 30 Nm
120 mm 4 x M10, max. 30 Nm 2 x M10, max. 30 Nm
Clamping force and torque:
Torques for grade 12.9 mounting bolts:
Example for rationalization calculation:
Jaw width 50 mm - max. clamping force 12 kN Jaw width 80 and 120 mm - max. clamping force 25 kN
Machine Table 400 x 500 mm
Machine hourly rate € 80,--/h
Work piece Centering, drilling, counter-sinking, tapping
Work plan Vice – 1 work piece Multiple clamping system – 5 work piecesInsertion and clamping of work piece 10 sec. 5 x 10 sec. = 50 sec.
Closing of protective cover, program start 10 sec. 10 sec. = 10 sec.
4 x processing 60 sec. 5 x 60 sec. = 300 sec.
4 x tool changes (chip-to-chip) 60 sec. 60 sec. = 60 sec.
Opening of protective cover 10 sec. 10 sec. = 10 sec.
Cleaning of vice and work piece 20 sec. 5 x 20 sec. = 100 sec.
170 sec. 530 sec.
Bearbeitungskosten€ 3.75 / work piece € 2.35 / work piece
This means a cost reduction of € 1.40 / work piece or 37%
6
2006/22GB
CLAMPING AND FIXTURE SYSTEMS
Specifications subject to change.
Base elementsOrder
no. Article no. Length[mm]
Clamping force[kN] g
304873304923304899
6371G-50-250-0406371G-50-320-0406371G-50-500-040
250320500
123.34.26.6
304949304915304964
6371G-50-600-0406371G-50-650-0406371G-50-700-040
600650700
128.08.79.3
No. 6371G-50 Base elementJaw width 50 mm
Bore spacing 40 mm. Hardened 60 HRC, 1 mm splines. Fits all AMF pitch systems: 40 mm pitch, M12, ø16 F7.
Orderno. Article no. Length
[mm]Clamping force
[kN] g
304774304824304790
6371G-80-350-0406371G-80-500-0406371G-80-600-040
350500600
2511.115.818.9
304840304816
6371G-80-650-0406371G-80-700-040
650700 25 20.6
22.1
No. 6371G-80 Base elementJaw width 80 mm
Bore spacing 40 mm. Hardened 60 HRC, 1 mm splines. Fits all AMF pitch systems: 40 mm pitch, M12, ø16 F7.
Orderno. Article no. Length
[mm]Clamping force
[kN] g
304766304782304733
6371G-80-350-0506371G-80-500-0506371G-80-600-050
350500600
2510.715.518.6
304758304808
6371G-80-650-0506371G-80-700-050
650700 25 20.0
21.7
No. 6371G-80 Base elementJaw width 80 mm
Bore spacing 50 mm. Hardened 60 HRC, 1 mm splines. Fits all AMF pitch systems: 50 mm pitch, M16, ø22 F7.
Orderno. Article no. Length
[mm]Clamping force
[kN] g
304865304881304907
6371G-120-500-0506371G-120-600-0506371G-120-700-050
500600700
2513.015.918.5
No. 6371G-120 Base elementJaw width 120 mm
Bore spacing 50 mm. Hardened 60 HRC, 1 mm splines. Fits all AMF pitch systems: 50 mm pitch, M16, ø22 F7.
kg
kg
kg
kg
Base elements
CLAMPING AND FIXTURE SYSTEMS 7
Specifications subject to change.
2006
/22G
B
Article no. A B C D E F G H H1 I K L N R S T
6371G-50-250-0406371G-50-320-0406371G-50-500-040
250320500
606060
404040
200200400
161616
101010
131313
12.512.512.5
12.512.512.5
202020
256030
252030
181818
404040
585858
161121
6371G-50-600-0406371G-50-650-0406371G-50-700-040
600650700
606060
404040
400400400
161616
101010
131313
12.512.512.5
12.512.512.5
202020
100125150
204530
181818
404040
585858
5176
101
Article no. A B C D E F G H H1 I K L N R S T
6371G-80-350-0406371G-80-500-0406371G-80-600-040
350500600
909090
606060
200400400
161616
101010
131313
12.512.512.5
12.512.512.5
202020
7530
100
353020
181818
404040
585858
262151
6371G-80-650-0406371G-80-700-040
650700
9090
6060
400400
1616
1010
1313
12.512.5
12.512.5
2020
125150
4530
1818
4040
5858
76101
Article no. A B C D E F G H H1 I K L N R S T
6371G-80-350-0506371G-80-500-0506371G-80-600-050
350500600
909090
606060
200400400
222222
131313
171717
171717
171717
262626
7575
100
252550
181818
505050
686868
161641
6371G-80-650-0506371G-80-700-050
650700
9090
6060
400400
2222
1313
1717
1717
1717
2626
125150
2550
1818
5050
6868
6691
Article no. A B C D E F G H H1 I K L N R S T
6371G-120-500-0506371G-120-600-0506371G-120-700-050
500600700
105105105
454545
250300300
222222
131313
171717
171717
4x104x104x10
252525
125150200
255050
181818
505050
686868
164191
Jaw width 50 mm, bore spacing 40 mm
Technical data base element No. 6371G
Jaw width 80 mm, bore spacing 40 mm
Jaw width 80 mm, bore spacing 50 mm
Jaw width 120 mm, bore spacing 50 mm
8
2006/22GB
CLAMPING AND FIXTURE SYSTEMS
Specifications subject to change.
Base jawsOrder
no. Article no.g
265793266809304980
6371-4101-506371-4111-806371-12001-120
226880
2300
No. 6371 Base jaw, standardFirst stop on base element, for 50, 80 or 120 mm jaw width. Hardened 60 HRC.
Orderno. Article no.
g
290635290650
6371-4120-506371-4121-80
230900
No. 6371 Base jaw, deepFirst stop on base element, for 50 or 80 mm jaw width. Hardened 60 HRC.
Article no. A B C (D) E F G H J K L M N
6371-4101-506371-4111-806371-12001-120
4978
120
20.032.242.2
172232
284254
24.738.050.0
3.34.04.0
12.419.025.0
888
8.511.016.0
18.531.545.0
5.56.06.0
3xM53xM63xM6
2xM62xM62xM6
Article no. A B C (D) E F G H J K L M N
6371-4120-506371-4121-80
4978
20.032.2
1722
3146
24.738.0
6.38.0
12.419.0
88
8.511.0
18.531.5
5.56.0
3xM53xM6
2xM62xM6
Dimensions:
Dimensions:
Clamping jaws and central jaws
CLAMPING AND FIXTURE SYSTEMS 9
Specifications subject to change.
2006
/22G
B
Orderno. Article no.
g
304931304956
6371-50105-506371-80107-80
3401330
No. 6371 Clamping jaw, without stepFirst stop on base element, for 50 or 80 mm jaw width. Hardened 60 HRC.
Orderno. Article no.
g
300905300921
6371-4112-506371-4300-80
3701424
No. 6371 Central jawfor clamping from two sides.
For 50 or 80 mm jaw width. Hardened 60 HRC.
Article no. A B D F G H J K L M N
6371-50105-506370-80107-80
4978
20.032.2
3250
-23
09
88
8.511.0
18.531.5
11.516.0
6xM58xM6
2xM64xM6
Article no. A B C (D) E F G H J K L M N
6371-4112-506371-4300-80
4778
20.032.2
1722
4058
33.450.0
3.34.0
4.59.0
88
8.511.0
18.531.5
5.56.0
6xM56xM6
4xM64xM6
Dimensions:
Dimensions:
10
2006/22GB
CLAMPING AND FIXTURE SYSTEMS
Specifications subject to change.
Clamping jawsOrder
no. Article no. Clamping force[kN]
Clamping stroke[mm] g
265835266825305003
6371-4102-506371-4110-806371-12002-120
122525
2373
14462900
No. 6371 Clamping jaw, standardFor 50, 80 or 120 mm jaw width, with 1 mm positioning increments. Hardened 60 HRC. With one clamping bolt and two mounting bolts.
Orderno. Article no. Clamping force
[kN]Clamping stroke
[mm] g
300863300889
6371-4109-506371-4119-80
1225 2 390
1430
No. 6371 Clamping jaw, deepFor 50 or 80 mm jaw width, with 1 mm positioning increments. Hardened 60 HRC. With one clamping bolt and two mounting bolts.
Article no. A B C (D) E F G H J K L M N T U V
6371-4102-506371-4110-806371-12002-120
4978
120
20.032.242.2
172232
406072
33.752.064.0
344
12.419.025.0
888
8.511.016.0
18.531.545.0
5.56.06.0
6xM56xM66xM6
2xM62xM62xM6
3.34.04.0
577
284254
Article no. A B C (D) E F G H J K L M N T U V
6371-4109-506371-4119-80
4978
20.032.2
1722
4364
30.748.0
68
12.419.0
88
8.511.0
18.531.5
5.56.0
6xM56xM6
2xM62xM6
6.38.0
57
3146
Dimensions:
Dimensions:
Clamping jaws
CLAMPING AND FIXTURE SYSTEMS 11
Specifications subject to change.
2006
/22G
B
Orderno. Article no. Clamping force
[kN]Clamping stroke
[mm] g
304972304998
6371-50101-506371-80101-80
1225 2 370
1400
No. 6371 Clamping jaw, without stepFor 50 or 80 mm jaw width, with 1 mm positioning increments. Hardened 60 HRC. With one clamping bolt and two mounting bolts.
Orderno. Article no. Clamping force
[kN]Clamping stroke
[mm] g
305011305037
6371-50110-506371-80110-80
1225 1.4 280
1000
No. 6371 Clamping jaw, with crescentFor 50 or 80 mm jaw width, with 1 mm positioning increments. Hardened 60 HRC. With one clamping bolt for size 50 or two bolts for size 80, and with two mounting bolts.
Article no. A B D G H J K L M N T V
6371-50101-506371-80101-80
4978
20.032.2
36.555.5
13.020.5
88
8.511.0
18.531.5
11.516.0
7xM58xM6
2xM62xM6
-23
17.523.0
Article no. A B C D G H J L M N T
6371-50110-506371-80110-80
4982
23.032.2
282x28
30.546.0
15.323.0
88
-16
-25
-4xM6
2xM62xM6
1216
Dimensions:
Application example, jaw width 80 mm:
Dimensions:
Jaw width 50 mm
Jaw width 50 mm
Jaw width 80 mm
Jaw width 80 mm
12
2006/22GB
CLAMPING AND FIXTURE SYSTEMS
Specifications subject to change.
Gripping jawsOrder
no. Article no. for jaw width A B Cg
300988301002
6371-4107-50-046371-4108-50-09 50 49 4
9 17 2351
301028301044
6371-4117-80-046371-4118-80-11 80 78 4
11 22 49135
304857 6371-12024-120-04 120 120 4 32 115
No. 6371 Gripping jaw, smoothHardened 60 HRC.
Orderno. Article no. for jaw width A B C
g
266569266585
6371-4103-50-096371-4104-50-12 50 49 9
12 17 5167
266841266866
6371-4113-80-116371-4114-80-18 80 78 11
18 22 133217
304832 6371-12018-120-15 120 120 15 32 430
No. 6371 Gripping jaw, smoothNot hardened, for individual processing.
Orderno. Article no. for jaw width A B C
g
300947266601
6371-4105-50-046371-4106-50-09 50 49 4
9 17 2151
300962266882
6371-4115-80-046371-4116-80-11 80 78 4
11 22 46133
305029 6371-12025-120-04 120 120 4 32 110
No. 6371 Gripping jaw, knurledHardened 60 HRC.
Orderno. Article no. for jaw width
ScrewDIN 7984
A B C H ±0.02g
305086305094305102
6371-100-50-126371-100-80-126371-100-120-12
5080
120
M5x20M6x20M6x20
4978
12012
172232
152030
70150350
No. 6371 Gripping jaw, with clawsHardened 60 HRC. Clamping edge height only 2 mm.
Accessories
CLAMPING AND FIXTURE SYSTEMS 13
Specifications subject to change.
2006
/22G
B
Orderno. Article no. Forme A B C
g
266627266643266668
6371-4201-50-0116371-4202-50-0126371-4203-50-013
A 49 3111213
111213
266684266700266726
6371-4204-50-0146371-4205-50-0156371-4206-50-016
A 49 3141516
161617
305045305060
6371-1216-120-0166371-1220-120-020 A 120 4 16
20580730
305052305078
6371-1224-120-0246371-1228-120-028 B 120 4 24
28790950
301069300871300897300913
6371-4351-80-0126371-4352-80-0136371-4353-80-0146371-4354-80-015
A 78 4
12131415
27303334
266908266577266593266619266635266650
6371-4355-80-0166371-4356-80-0176371-4357-80-0186371-4358-80-0196371-4359-80-0206371-4360-80-021
B 78 4
161718192021
353637404346
No. 6371 Support wedge
Orderno. Article no. B H L M
g
266742266676295006
6371-4220-506371-4380-806371-4380-1-80
161818
788
406078
6356980
No. 6371 Lateral stopfor base, central and clamping jaw.
Orderno. Article no. Fixation
g
300970300996
6371-4222-506371-4391-80 right 19
43
300939300954
6371-4221-506371-4390-80 left 19
43
No. 6371 Chip guard
Orderno. Article no. A
g
301010301036
6371-9010-106371-9012-12
1012
1617
301051301077
6371-9014-146371-9018-18
1418
1823
No. 6371 T-nut
for jaw width 50 mm
for jaw width 80 mm
for jaw width 120 mm
Form A
Form B
14
2006/22GB
CLAMPING AND FIXTURE SYSTEMS
Specifications subject to change.
... about Pneumatic Vice
Benefits at a glance:
• The pneumatic vice is specifically designed for the machining of single and series items that requirequick and precise clamping.
• The pneumatic operation significantly reduces the clamping time.
• The clamping force is adjustable to different work-piece requirements.
• All supports and guides are hardened (55-60 HRC) and ground.The supports are manufactured to a height tolerance of ±0.01 mm.
• Jaws are case-hardened (60 HRC)
• 4 slots facilitate the simple attachment of locators, gauges and special jaws.
• Jaw widths of 70 to 200 mm
• Clamping forces of up to 70 kN at 6 bar
Fixed jaw with T-slot
Threadsfor stops
Air supply
Replaceablegripping jaws
Clamping jaw with T-slot
Pre-adjustment bolt
T-slot for stop parts
Vice with modular carrier Vice with stepped gripping jaw
Pneumatic piston surface
Base element, Modular carrier and support
CLAMPING AND FIXTURE SYSTEMS 15
Specifications subject to change.
2006
/22F
Orderno. Article no. Jaw width A
[mm]Clamping force at 6 bar
[kN] g
301085301101301127
6372-0700-E0706372-0900-E0906371-1002-E100
7090
100
51015
8.51825
301143301168301184301200
6372-1150-E1156372-1301-E1306372-1600-E1606372-2000-E200
115130160200
22305070
303958
112
No. 6372 Base elementHardened 56 HRc.With 1 pair of gripping jaws, smooth, hardened 60 HRc.
Orderno. Article no.
g
301242301267301283
6372-3013-E0706372-3001-E0906372-3002-E100
174242306460
301309301341301366
6372-3003-E1156372-3005-E1606372-3006-E200
76701242024490
No. 6372 Modular carrier and supportHardened 56 HRc.
SizeA B C D E F G H I Stroke
K L M N O P SW
7090
100
404446
90112128
102128145
187241260
220288317
8710386
107133116
139177178
2.04.04.0
7092
105
M 6M 8M10
10.020.020.0
200288277
141818
81414
115130160200
606580
100
140160196236
145155160195
290315368475
340370403480
112127164235
142163200275
206229272361
3.23.54.04.5
105110115135
M10M10M10M12
20.020.018.520.0
300330366440
18181818
17171717
SizeA1 A B C C1 D D1 E E1 F F1 G G1 L
±0.01 M N
7090
100
90112128
566880
548091
405472
111414
7.08.5
10.5
28.533.036.0
111417
172828
11.014.017.0
111616
79
12
7092
105
48
10
243643
115160200
140196236
91126150
100120140
7484
100
171722
10.513.016.5
36.040.050.0
171723
353550
17.019.016.5
171722
121317
105115135
101216
465670
Dimensions:
Dimensions:
kg
Modular carrier: Support:
deep
deep deep
16
2006/22GB
CLAMPING AND FIXTURE SYSTEMS
Specifications subject to change.
Gripping jawsOrder
no. Article no.g
301176301192301218
6372-4048-E0706372-4041-E0906372-4042-E100
232352423
301234301259301275301291
6372-4043-E1156372-4044-E1306372-4045-E1606372-4046-E200
493771950
1790
Size A B C D E F G
7090
100
404446
323640
7.08.5
11.0
101515
111417
6.59.0
11.0
115130160200
606580
100
40454560
11.011.011.013.0
15181820
17171719
11.011.011.013.0
No. 6372 Gripping jaw, smoothHardened 60 HRc.
Orderno. Article no.
g
301317301333301358
6372-4071-E0706372-4073-E0906372-4074-E100
262322392
301374301390301416301432
6372-4075-E1156372-4076-E1306372-4077-E1606372-4078-E200
455720896
1661
Size A B C D E F G
7090
100
404446
323640
7.08.5
11.0
101515
111417
6.59.0
11.0
115130160200
606580
100
40454560
11.011.011.013.0
15181820
17171719
11.011.011.013.0
No. 6372 Gripping jaw, knurledHardened 60 HRc.
Dimensions:
Dimensions:
deep
deep
Gripping jaws
CLAMPING AND FIXTURE SYSTEMS 17
Specifications subject to change.
2006
/22G
B
Orderno. Article no.
g
301580301606301622
6372-4050-E0706372-4001-E0906372-4002-E100
235359426
301648301663301689301705
6372-4003-E1156372-4004-E1306372-4005-E1606372-4006-E200
495775955
1790
Size A B C ±0.01 D E ±0.01 F G
7090
100
404446
323640
7.08.5
11.0
101515
111417
6.59.0
11.0
115130160200
606580
100
40454560
11.011.011.013.0
15181820
17171719
11.011.011.013.0
No. 6372 Gripping jaw, smoothNot hardened, for individual processing.
Orderno. Article no.
g
301440301465301481
6372-4061-E0706372-4007-E0906372-4008-E100
262322392
301507301523301549301564
6372-4009-E1156372-4010-E1306372-4011-E1606372-4012-E200
455720896
1661
Size A B C ±0.01 D E ±0.01 F G H ±0.01 I K ±0.01
7090
100
404446
323640
7.08.5
11.0
101515
111417
6.59.0
11.0
344
2.53.03.0
899
115130160200
606580
100
40454560
11.011.011.013.0
15181820
17171719
11.011.011.013.0
4446
3.03.03.04.0
9131316
No. 6372 Gripping jaw, steppedHardened 60 HRc.
Dimensions:
Dimensions:
deep
deep
18
2006/22GB
CLAMPING AND FIXTURE SYSTEMS
Specifications subject to change.
Modular jaw and Gripping jawOrder
no. Article no.g
301382301408301424
6372-4057-E0706372-4031-E0906372-4032-E100
239305370
301093301119301135301150
6372-4033-E1156372-4034-E1306372-4035-E1606372-4036-E200
435697865
1620
No. 6372 Modular jawHardened 60 HRc.
Orderno. Article no.
g
301515301531301556
6372-4054-E0706372-4013-E0906372-4014-E100
262532708
301572301598301614301630
6372-4015-E1156372-4016-E1306372-4017-E1606372-4018-E200
822107912962260
Size A B C ±0.01 D E ±0.01 F G H
7090
100
404446
323640
79
11
182628
111417
142022
13.320.320.3
115130160200
606580
100
40454560
11111113
28282828
17171719
22222222
20.320.324.323.8
No. 6372 Gripping jaw, V-blockHardened 60 HRc.
Size A B C ±0.01 D E ±0.01 F G I ±0.01 K ±0.01
7090
100
404446
323640
7.08.5
11.0
101515
111417
6.59.0
11.0
2.53.03.0
202223
115130160200
606580
100
40454560
11.011.011.013.0
15181820
17171719
11.011.011.013.0
3.03.03.04.0
23282837
Dimensions:
Dimensions:
deep
deep
Stepped jaw and Angle jaw
CLAMPING AND FIXTURE SYSTEMS 19
Specifications subject to change.
2006
/22G
B
Orderno. Article no.
g
301721301747301762
6372-4055-E0706372-4019-E0906372-4020-E100
239305370
301788301457301473301499
6372-4021-E1156372-4022-E1306372-4023-E1606372-4024-E200
435697865
1620
No. 6372 Stepped jawHardened 60 HRc.
Orderno. Article no.
g
301655301671301697
6372-4056-E0706372-4025-E0906372-4026-E100
382877
1320
301713301739301754301770
6372-4027-E1156372-4028-E1306372-4029-E1606372-4030-E200
1481220033005800
Size A B C ±0.01 D E F G I ±0.01 K ±0.01 N
7090
100
566880
405472
6.56.5
11.0
323640
111417
79
12
243042
121618
243643
115130160200
91100126150
747684
100
11.011.013.013.0
40454560
17171919
12121313
48445268
17202025
46465670
No. 6372 Angle jawHardened 60 HRc.
Size A B C ±0.01 D E F G H ±0.01 K ±0.01 L ±0.01 M ±0.01 N ±0.01
7090
100
566880
476585
6.58.5
11.0
243643
111417
79
12
182530
101316
152126
192232
395468
115130160200
91100126150
8590
100118
11.011.013.013.0
46465670
17171919
12121313
28353850
16171830
24313042
32403656
717282
100
Dimensions:
Dimensions:
Application example:
Application example:deep
deep
20
2006/22GB
CLAMPING AND FIXTURE SYSTEMS
Specifications subject to change.
AccessoriesOrder
no. Article no. A B C D E F Lg
301804301796
6372-5003-E070-E0906372-5001-E100-E200
2838
2630
1317
1116
1618
3034
5660
135226
No. 6372 Double-ended clamp
Orderno. Article no. A B C D E F G L M
g
301846301820
6372-5006-E070-E0906372-5002-E100-E200
2650
1619
1215
3347
2550
1321
1116
89125
1212
278524
No. 6372 Straight clamp
Orderno. Article no.
g
301861 6372-5004 643
No. 6372 Stop
Orderno. Article no.
g
301903 6372-6001 1037
No. 6372 Pneumatic valve
Orderno. Article no.
g
301929 6372-6002 1079
No. 6372 Air-preparation unit
Index...
CLAMPING AND FIXTURE SYSTEMS 21
2006
/22G
B
…by Article no.
…by Order no.
Article no. Page Article no. Page Article no. Page Article no. Page6371-100-50-12 126371-100-80-12 126371-100-120-12 126371-1216-120-016 136371-1220-120-020 136371-1224-120-024 136371-1228-120-028 136371-4101-50 86371-4102-50 106371-4103-50-09 126371-4104-50-12 126371-4105-50-04 126371-4106-50-09 126371-4107-50-04 126371-4108-50-09 126371-4109-50 106371-4110-80 106371-4111-80 86371-4112-50 96371-4113-80-11 126371-4114-80-18 126371-4115-80-04 126371-4116-80-11 126371-4117-80-04 126371-4118-80-11 126371-4119-80 106371-4120-50 86371-4121-80 86371-4201-50-011 136371-4202-50-012 136371-4203-50-013 136371-4204-50-014 136371-4205-50-015 136371-4206-50-016 136371-4220-50 136371-4221-50 136371-4222-50 13
6371-4300-80 96371-4351-80-012 136371-4352-80-013 136371-4353-80-014 136371-4354-80-015 136371-4355-80-016 136371-4356-80-017 136371-4357-80-018 136371-4358-80-019 136371-4359-80-020 136371-4360-80-021 136371-4380-80 136371-4380-1-80 136371-4390-80 136371-4391-80 136371-9010-10 136371-9012-12 136371-9014-14 136371-9018-18 136371-12001-120 86371-12002-120 86371-12018-120-15 126371-12024-120-04 126371-12025-120-04 126371-50101-50 116371-50105-50 96371-50110-50 116371-80101-80 116371-80107-80 96371-80110-80 116371G-50 66371G-80 66371G-120 66372-0700-E070 156372-0900-E090 156372-1002-E100 156372-1150-E115 15
6372-1301-E130 156372-1600-E160 156372-2000-E200 156372-3001-E090 156372-3002-E100 156372-3003-E115 156372-3005-E160 156372-3006-E200 156372-3013-E070 156372-4001-E090 176372-4002-E100 176372-4003-E115 176372-4004-E130 176372-4005-E160 176372-4006-E200 176372-4007-E090 176372-4008-E100 176372-4009-E115 176372-4010-E130 176372-4011-E160 176372-4012-E200 176372-4013-E090 186372-4014-E100 186372-4015-E115 186372-4016-E130 186372-4017-E160 186372-4018-E200 186372-4019-E090 196372-4020-E100 196372-4021-E115 196372-4022-E130 196372-4023-E160 196372-4024-E200 196372-4025-E090 196372-4026-E100 196372-4027-E115 196372-4028-E130 19
6372-4029-E160 196372-4030-E200 196372-4031-E090 186372-4032-E100 186372-4033-E115 186372-4034-E130 186372-4035-E160 186372-4036-E200 186372-4041-E090 166372-4042-E100 166372-4043-E115 166372-4044-E130 166372-4045-E160 166372-4046-E200 166372-4048-E070 166372-4050-E070 176372-4054-E070 186372-4055-E070 196372-4056-E070 196372-4057-E070 186372-4061-E070 176372-4071-E070 166372-4073-E090 166372-4074-E100 166372-4075-E115 166372-4076-E130 166372-4077-E160 166372-4078-E200 166372-5001-E100-E200 206372-5002-E100-E200 206372-5003-E070-E090 206372-5004 206372-5006-E070-E090 206372-6001 206372-6002 20
Order no. Page Order no. Page Order no. Page Order no. Page265793 8265835 10266569 12266577 13266585 12266593 13266601 12266619 13266627 13266635 13266643 13266650 13266668 13266676 13266684 13266700 13266726 13266742 13266809 8266825 10266841 12266866 12266882 12266908 13290635 8290650 8295006 13300863 10300871 13300889 10300897 13300905 9300913 13300921 9300939 13300947 12300954 13300962 12300970 13300988 12300996 13
301002 12301010 13301028 12301036 13301044 12301051 13301069 13301077 13301085 15301093 18301101 15301119 18301127 15301135 18301143 15301150 18301168 15301176 16301184 15301192 16301200 15301218 16301234 16301242 15301259 16301267 15301275 16301283 15301291 16301309 15301317 16301333 16301341 15301358 16301366 15301374 16301382 18301390 16301408 18301416 16301424 18
301432 16301440 17301457 19301465 17301473 19301481 17301499 19301507 17301515 18301523 17301531 18301549 17301556 18301564 17301572 18301580 17301598 18301606 17301614 18301622 17301630 18301648 17301655 19301663 17301671 19301689 17301697 19301705 17301713 19301721 19301739 19301747 19301754 19301762 19301770 19301788 19301796 20301804 20301820 20301846 20301861 20
301903 20301929 20304733 6304758 6304766 6304774 6304782 6304790 6304808 6304816 6304824 6304832 12304840 6304857 12304881 6304873 6304899 6304907 6304915 6304923 6304931 9304949 6304956 9304964 6304972 11304980 8304998 11305003 10305011 11305029 12305037 11305045 13305052 13305060 13305078 13305086 12305094 12305102 12
22
2006/22GB
CLAMPING AND FIXTURE SYSTEMS
Genius, first positioning system for laser marking
Are you also tired of complicated manual positioning on your laser marking machine?
Tiring work! High costs due to long set-up times!
No repeatability! Complicated re-positioningfor each order!
! ! ! !
With the new AMF positioning system, AMF offers you a solution to all of these problems!
Building-block principle
Drawer system (fixed or sliding positioning base plate)
Positioning accuracy 0.1 mm
Repeatability 0.1 mm
Modular structure
Ergonomic
Conditions for Sales, Deliveries
CLAMPING AND FIXTURE SYSTEMS 23
2006
/22G
B
These conditions of sale apply to business conducted with companies, legal entities inthe public sector, and legal entities with special budget in the public sector. Our deliveries and services are carried out exclusively on the basis of the conditions statedbelow. Deviating purchasing conditions of the buyer will not become part of the contract, not even through acceptance of the order, unless we have expressly accep-ted them.
1. Offer and entering into a contractThe basis of our delivery contracts is the latest edition of our catalogue. Orders are notconsidered as accepted until they have been confirmed by us in writing. When goodsare supplied from stock and, for organisational reasons, you receive no separate confirmation, the invoice has the additional function of confirming the order. Details ofdimensions and weights, and illustrations, drawings and data are not binding and maybe changed by us at any time. Deviations cannot be excluded.
2. PricesPrices are quoted in EUR ex-works excluding turnover tax, packing, freight, carriage,and insurance. Unless otherwise agreed, our list prices on the day of delivery apply. Inorder to cover our costs, orders under EUR 50,– net value are subject to a small ordersurcharge of EUR 10,–.
3. DeliveryDelivery delays are quoted to the best of our knowledge but without guarantee. Agreeddelivery delays begin on the day we accept the order and refer to the completion of thegoods in our works.
4. Transfer of riskRisks are transferred to you when the goods are passed to a specific person, company, or organisation that is charged with the execution of carriage of the goods.This applies also to partial deliveries and when we have accepted the costs of carriage,delivery or erection. The risks are also transferred to you when you have defaulted onacceptance.
5. DispatchGoods are supplied ex-works. Dispatch is at your cost and risk. Scheduled, FOB, andCIF deliveries are also at your risk. In the absence of specific instructions concerning dispatch, we will arrange same as we think fit, but without accepting any responsibilityfor choosing the cheapest or most suitable method of dispatch. We make a handlingcharge of EUR 5,– if goods are sent at your request to a third party.You accept that your order can be supplied in partial deliveries insofar as this is reasonable.
6. Reservation of proprietary rightsGoods delivered remain our property until payment of all claims has been received in fullor until redemption of cheques given in payment. The cancellation of individual positionsin an open invoice and the drawing of a balance and its acceptance do not affect proprietary rights. You have the right to dispose of the goods as a normal commercialtransaction, but you are forbidden to pawn, mortgage, or transfer ownership of them insettlement of a debt or debts. You surrender to us herewith your right to payment for goods for which we reserve ourproprietary rights. You have the right to collect these payments as long as you meetyour obligations to us. If we request it, you are obliged to name the third party and wehave the right to publish this information and the transfer of rights.
7. Cancellation rights due to late payment or insolvencyIf you do not pay for the goods by the time payment is due, and if you have not paidafter expiry of a reasonable time limit set by us, we have the right to withdraw from thecontract and demand the return of goods already supplied. Rights under § 323 BGB(BGB = German civil law code) remain otherwise unaffected.Application for the opening of insolvency proceedings gives us the right to withdrawfrom the contract and demand the immediate return of goods supplied before the bank-ruptcy court orders protective measures.
8. PackagingPackages comply with the German packaging regulations (WO). Disposable packagingis charged at cost. The packaging is not returnable.
9. Tooling costsIn the absence of any agreement to the contrary, tooling made for the execution of anorder remains our property in all cases. This applies even if we have made a charge fora proportion of the tooling costs.
10. PaymentOur invoices are payable net within 30 days of the date of the invoice, or with 2%
discount if paid within 10 days. Invoices below EUR 50,– are payable immediately without discount. Our credit notes and your charges on us reduce the amount subject to discount. Late payment entitles us to interest at the rate the bank charges us for a current accountoverdraft but at least 8 percent above the current base rate of the European CentralBank. If payment is overdue, we are entitled, after giving you notice in writing, to ceasefulfilling our obligations under the contract until payment is received.
11. Offsetting exclusionYou can only offset payments with legally-established or unopposed counter claims.
12. GuaranteeIf you come to an agreement with us on properties of the goods, we include this agreement in our technical specifications. If we have to supply to your drawings, specifications, samples, etc., you accept the risk associated with suitability for the intended purpose. The point in time at which risk is transferred is decisive for the contractual condition of the goods. The deterioration of parts subject to wear in thecourse of normal use does not constitute a defect.If the goods supplied are defective, we will – at our choice and within a reasonable timelimit set by you – supply a replacement or repair the goods. If such repair or replacement is not satisfactory, you have the right to reduce the price or withdraw fromthe contract. Any further guarantee claims are excluded. Recognisable defects must benotified at the latest within 10 days of receipt and defects that are not recognisable mustbe notified as soon as they are discovered. The guarantee period is 24 months andstarts with dispatch of the goods from our works.
13. Hindered or impossible performanceIf we are prevented from meeting our obligation by some unforeseeable event (e.g. disruption of our plant, or delay in the delivery of important raw materials), which,in spite of taking all reasonable care appropriate to the circumstances of the case, wehave been unable to avert, and it has become impossible to execute the delivery or ser-vice punctually, the delivery delay will be extended to an appropriate extent.
14. LiabilityExcept in the case of injury to life or limb, or damage to health caused by our breach ofduty, we are only liable in the event of intent or culpable negligence on our part.
15. Customer specialsOrders for customer specials must be in writing and include binding details of execution, quantities etc. For technical reasons we reserve the right to supply 10% moreor less than the quantity specified. If technical changes or cancellation are required, the costs incurred will be charged tothe customer.
16. Deliveries of samples and return of goodsSamples will be charged. When goods have been sent for testing or as samples, we willcredit you with the additional price against subsequent orders, as long as the net contract value is at least EUR 125,–. The return of goods is only possible with prior agreement. Customer specialsmay not be returned. For goods returned for reasons outside our responsibility (e.g. wrongly ordered), we charge 10% of the value of the goods but at least EUR 7.50, to cover administration costs.
17. Place of fulfilment, court of jurisdictionThe place of fulfilment for all obligations arising from this contract is D-70707 Fellbach. The court of jurisdiction for any legal dispute arising from this contract is D-71332Waiblingen.(All disputes that arise from this contract or about its validity will be decided by a courtof arbitration according to the Arbitration Rules of the German Committee for ArbitrationCourts/Settlement and Arbitration Procedure of the International Chamber ofCommerce. Such decisions will be final and normal legal procedures are excluded.)German law applies (BGB and HGB = civil and commercial codes). The application ofUN purchasing law (CISG) is excluded.
18. Validity clauseIf individual conditions should be found to be not legally valid, the remaining conditionscontinue to apply. The invalid conditions will be replaced by conditions which fulfil as closely as possible the commercial intent of the contract with reasonable considerationof the interests of both parties. With the publication of these Conditions for Sales, Deliveries and Payment, all previousversions become invalid. This does not apply to contracts agreed before publication.