Multiple-Clamping System Pneumatic Vice

Hydraulic Clamping Systems

Toggle Clamps mechanical and pneumatic

Zero-Point-Systems

Standard Clamping Elements

CLAMPING. SCREWING. LOCKING.Plus Service Guarantee

Certified

according

to ISO 9001

CLAMPING. SCREWING. LOCKING.Plus Service Guarantee

SERVICE-

GUARANTEE

SERVICE-

GUARANTEE

SERVICE-

GUARANTEE

Catalogue 2006/22GB

Multiple-Clamping System

Pneumatic Vice

ANDREAS MAIER GmbH & Co. KG Schloss- und Werkzeugfabrik

Home address: Waiblinger Straße 116 70734 Fellbach Germany

Post address: Postfach 17 60 70707 Fellbach Germany

E-mail: [email protected] Internet: www.amf.de WAP: wap.amf.de

UK Sales Office: Tony FORNSWORTH UK Sales Manager Phone: +44 (0) 1924 242 972 Fax: +44 (0) 1924 242 891 Mobile: +44 (0) 7976 942 421 E-mail: [email protected]

Cat. order no. 444125 – & 1,50

All sales are subject to our terms of sales and delivery. All rights for creation, photos and text are reserved for editor AMF. Photo-mechanical or any other reproduction on expressed permission only.

OF -/0.5/-/3.5/03/2006 Printed in Germany

Cat. order no. 444141 – & 1,50

All sales are subject to our terms of sales and delivery. All rights for creation, photos and text are reserved for editor AMF. Photo-mechanical or any other reproduction on expressed permission only.

OF -/0.5/-/3.5/03/2006 Printed in Germany

Service Guarantee

Dear Customers,

Since 1890, the name AMF has stood for reliability andthe highest quality. Today our product range comprisesmore than 5000 articles in the sectors clamping, handtools, and locks. That makes us a leading Europeanmanufacturer.

Outstanding products are only one side of the coin. Forus, it is just as important to provide our customers withperfect service, day in and day out. We laid the founda-tions for this in recent years with our modern TeamOrganisation. The service from your partner at AMF willbe quick, direct, and competent.

Our exceptional service has a name: the AMF ServiceGuarantee. It offers you five significant advantages – seethem for yourself on this page.

Hans-Günther MaierManaging DirectorANDREAS MAIER GmbH & Co. KG

We offer you confidence – five ways – in every aspect of our products. At AMF, the service is right too. You can rely on us. Guaranteed!

Real technical adviceMany tasks and a multitude of solutions. From AMFProfessional Products you can find the right way tosolve your problem – fast and reliably – either at yourlocal dealer or with the help of the specialist in ourteam. Just call us!

Short delivery timesFrom the AMF finished-product stores with over 5.000articles, we can supply 98 % of orders from stock. Andyou can be sure that every stock article ordered isdespatched the same day.

Certified qualityAMF stands for painstaking production in our own works.We have followed this tradition since 1890 – today, ofcourse, with a modern quality assurance system to ISO9001.

WarrantyWe believe in the high quality of our products.Complaints are dealt with quickly, unbureaucraticallyand generously – as far as possible, even well-beyondthe guarantee period.

Individual developmentYou cannot find the product you need? Talk to us; we will find the right solution for you – from a special version, right through to a completely new development.

Fiveways!Fiveways!

2

2006/22GB

CLAMPING AND FIXTURE SYSTEMS

1

2

3

4

5

Company history

1890: Company founded by AndreasMaier as a lock manufacturer.

1920: Production program extended toinclude spanners.

1928: Production-line assembly of“Fellbach locks”.

1951: With the introduction of clampingelements, AMF diversified into thefields of workpiece and tool clamping.

1965: Toggle clamps extend the AMF product range. AMF catalogues arenow published in ten languages.

1975: Hydraulic clamping marks furtherspecialisation.

1982: Clamping and fixture systems roundoff AMF comtetence in clamping.

1996: Introduction of the AMF TeamOrganisation in all business sectors.Quality assurance certified to ISO 9001.

2002: Introduction of the AMF Service Guarantee for all products.

2004: Launching of our new Zero-Point-System "ZPS".

2005: Launching of the Positioning System for Laser Marking.

Table of contentsNumber index see page 21

CLAMPING AND FIXTURE SYSTEMS 3

2006

/22G

B

4-5

6-7

8-11

12-13

14

99-109

20

Base elements

... about Multiple-Clamping System

Gripping jaws, Accessories

... about Pneumatic Vice

Base elements and Modular carrier

Gripping jaws

Accessories

Base jaws, Clamping jaws

15

16-19

Mul

tiple-

Clam

ping

Sys

tem

Pneu

mat

ic Vi

ce

4

2006/22GB


Specifications subject to change.


Basic jaw,removable

gripping jaw, knurled forincreased clamping force

Threads for attachmentof stop parts

Gripping jaw, soft

1 mm serration Lateral stop

Support wedge

2 mm clampingstroke

Gripping jaw,smooth

Base

Clamping jaw

Clamping system for the multiple clamping of small items in series production on state-of-the-art NC andCNC tools used for drilling, milling, grinding and electrical discharge machining.

Benefits at a glance:

• High-precision multiple clamping device • Positive-fit attachment of clamping jaws

• Hardened steel (60 HRC) • Single-bolt clamping per clamping position

• Up to 16 clamping positions per work piece • 50 mm, 80 mm and 120 mm jaw width

• Simple and precise adjustment of clamping jaws • Modular design: Set-up for one or multiple thanks to serrated contact surfaces Work pieces as required

• Positioning increments of 1 mm • Work piece supports integrated in clamping jaws

• Scale at basic module and reference mark at • For use on machine tables, devices and the clamping jaws allow the positioning without quick-change systemsmeasuring and test equipment

SizeLength[mm]

Work-piece quantity

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Max. work-piece dimension [mm]

50

250 191 78 41 22 11

320 261 113 64 39 25 15 8

500 441 203 124 84 61 45 34 25 18 13 9

600 541 253 157 109 81 61 48 38 30 23 18 14 10

650 591 278 174 122 91 70 56 44 35 28 22 18 14 10

700 641 303 191 134 101 78 62 50 41 33 27 22 18 14 11 8

80

350 261 105 52 26 11

500 411 180 102 64 41 25 14

600 511 230 136 89 61 42 28 18 11

650 561 255 152 101 71 50 36 25 16

700 611 280 169 114 81 59 43 31 22 14

120500 381 158 83 46 24 9

600 481 208 117 71 44 26 13

700 581 258 150 96 64 42 27 15

Work-piece quantities for multiple clamping system:




2006

/22G

B

Jaw width Attachment of basic jaws Attachment of clamping jaws

50 mm 2 x M 6, max. 25 Nm 2 x M 6, max. 20 Nm

80 mm 2 x M10, max. 30 Nm 2 x M10, max. 30 Nm

120 mm 4 x M10, max. 30 Nm 2 x M10, max. 30 Nm

Clamping force and torque:

Torques for grade 12.9 mounting bolts:

Example for rationalization calculation:

Jaw width 50 mm - max. clamping force 12 kN Jaw width 80 and 120 mm - max. clamping force 25 kN

Machine Table 400 x 500 mm

Machine hourly rate € 80,--/h

Work piece Centering, drilling, counter-sinking, tapping

Work plan Vice – 1 work piece Multiple clamping system – 5 work piecesInsertion and clamping of work piece 10 sec. 5 x 10 sec. = 50 sec.

Closing of protective cover, program start 10 sec. 10 sec. = 10 sec.

4 x processing 60 sec. 5 x 60 sec. = 300 sec.

4 x tool changes (chip-to-chip) 60 sec. 60 sec. = 60 sec.

Opening of protective cover 10 sec. 10 sec. = 10 sec.

Cleaning of vice and work piece 20 sec. 5 x 20 sec. = 100 sec.

170 sec. 530 sec.

Bearbeitungskosten€ 3.75 / work piece € 2.35 / work piece

This means a cost reduction of € 1.40 / work piece or 37%

6

2006/22GB



Base elementsOrder

no. Article no. Length[mm]

Clamping force[kN] g

304873304923304899

6371G-50-250-0406371G-50-320-0406371G-50-500-040

250320500

123.34.26.6

304949304915304964

6371G-50-600-0406371G-50-650-0406371G-50-700-040

600650700

128.08.79.3

No. 6371G-50 Base elementJaw width 50 mm

Bore spacing 40 mm. Hardened 60 HRC, 1 mm splines. Fits all AMF pitch systems: 40 mm pitch, M12, ø16 F7.

Orderno. Article no. Length

[mm]Clamping force

[kN] g

304774304824304790

6371G-80-350-0406371G-80-500-0406371G-80-600-040

350500600

2511.115.818.9

304840304816

6371G-80-650-0406371G-80-700-040

650700 25 20.6

22.1




[mm]Clamping force

[kN] g

304766304782304733

6371G-80-350-0506371G-80-500-0506371G-80-600-050

350500600

2510.715.518.6

304758304808

6371G-80-650-0506371G-80-700-050

650700 25 20.0

21.7




[mm]Clamping force

[kN] g

304865304881304907

6371G-120-500-0506371G-120-600-0506371G-120-700-050

500600700

2513.015.918.5



kg

kg

kg

kg

Base elements



2006

/22G

B

Article no. A B C D E F G H H1 I K L N R S T

6371G-50-250-0406371G-50-320-0406371G-50-500-040

250320500

606060

404040

200200400

161616

101010

131313

12.512.512.5

12.512.512.5

202020

256030

252030

181818

404040

585858

161121

6371G-50-600-0406371G-50-650-0406371G-50-700-040

600650700

606060

404040

400400400

161616

101010

131313

12.512.512.5

12.512.512.5

202020

100125150

204530

181818

404040

585858

5176

101


6371G-80-350-0406371G-80-500-0406371G-80-600-040

350500600

909090

606060

200400400

161616

101010

131313

12.512.512.5

12.512.512.5

202020

7530

100

353020

181818

404040

585858

262151

6371G-80-650-0406371G-80-700-040

650700

9090

6060

400400

1616

1010

1313

12.512.5

12.512.5

2020

125150

4530

1818

4040

5858

76101


6371G-80-350-0506371G-80-500-0506371G-80-600-050

350500600

909090

606060

200400400

222222

131313

171717

171717

171717

262626

7575

100

252550

181818

505050

686868

161641

6371G-80-650-0506371G-80-700-050

650700

9090

6060

400400

2222

1313

1717

1717

1717

2626

125150

2550

1818

5050

6868

6691


6371G-120-500-0506371G-120-600-0506371G-120-700-050

500600700

105105105

454545

250300300

222222

131313

171717

171717

4x104x104x10

252525

125150200

255050

181818

505050

686868

164191

Jaw width 50 mm, bore spacing 40 mm

Technical data base element No. 6371G




8

2006/22GB



Base jawsOrder

no. Article no.g

265793266809304980

6371-4101-506371-4111-806371-12001-120

226880

2300

No. 6371 Base jaw, standardFirst stop on base element, for 50, 80 or 120 mm jaw width. Hardened 60 HRC.

Orderno. Article no.

g

290635290650

6371-4120-506371-4121-80

230900

No. 6371 Base jaw, deepFirst stop on base element, for 50 or 80 mm jaw width. Hardened 60 HRC.

Article no. A B C (D) E F G H J K L M N

6371-4101-506371-4111-806371-12001-120

4978

120

20.032.242.2

172232

284254

24.738.050.0

3.34.04.0

12.419.025.0

888

8.511.016.0

18.531.545.0

5.56.06.0

3xM53xM63xM6

2xM62xM62xM6


6371-4120-506371-4121-80

4978

20.032.2

1722

3146

24.738.0

6.38.0

12.419.0

88

8.511.0

18.531.5

5.56.0

3xM53xM6

2xM62xM6

Dimensions:

Dimensions:

Clamping jaws and central jaws



2006

/22G

B


g

304931304956

6371-50105-506371-80107-80

3401330

No. 6371 Clamping jaw, without stepFirst stop on base element, for 50 or 80 mm jaw width. Hardened 60 HRC.


g

300905300921

6371-4112-506371-4300-80

3701424

No. 6371 Central jawfor clamping from two sides.

For 50 or 80 mm jaw width. Hardened 60 HRC.

Article no. A B D F G H J K L M N

6371-50105-506370-80107-80

4978

20.032.2

3250

-23

09

88

8.511.0

18.531.5

11.516.0

6xM58xM6

2xM64xM6


6371-4112-506371-4300-80

4778

20.032.2

1722

4058

33.450.0

3.34.0

4.59.0

88

8.511.0

18.531.5

5.56.0

6xM56xM6

4xM64xM6

Dimensions:

Dimensions:

10

2006/22GB



Clamping jawsOrder

no. Article no. Clamping force[kN]

Clamping stroke[mm] g

265835266825305003

6371-4102-506371-4110-806371-12002-120

122525

2373

14462900

No. 6371 Clamping jaw, standardFor 50, 80 or 120 mm jaw width, with 1 mm positioning increments. Hardened 60 HRC. With one clamping bolt and two mounting bolts.

Orderno. Article no. Clamping force

[kN]Clamping stroke

[mm] g

300863300889

6371-4109-506371-4119-80

1225 2 390

1430

No. 6371 Clamping jaw, deepFor 50 or 80 mm jaw width, with 1 mm positioning increments. Hardened 60 HRC. With one clamping bolt and two mounting bolts.

Article no. A B C (D) E F G H J K L M N T U V

6371-4102-506371-4110-806371-12002-120

4978

120

20.032.242.2

172232

406072

33.752.064.0

344

12.419.025.0

888

8.511.016.0

18.531.545.0

5.56.06.0

6xM56xM66xM6

2xM62xM62xM6

3.34.04.0

577

284254

Article no. A B C (D) E F G H J K L M N T U V

6371-4109-506371-4119-80

4978

20.032.2

1722

4364

30.748.0

68

12.419.0

88

8.511.0

18.531.5

5.56.0

6xM56xM6

2xM62xM6

6.38.0

57

3146

Dimensions:

Dimensions:

Clamping jaws



2006

/22G

B


[kN]Clamping stroke

[mm] g

304972304998

6371-50101-506371-80101-80

1225 2 370

1400

No. 6371 Clamping jaw, without stepFor 50 or 80 mm jaw width, with 1 mm positioning increments. Hardened 60 HRC. With one clamping bolt and two mounting bolts.


[kN]Clamping stroke

[mm] g

305011305037

6371-50110-506371-80110-80

1225 1.4 280

1000

No. 6371 Clamping jaw, with crescentFor 50 or 80 mm jaw width, with 1 mm positioning increments. Hardened 60 HRC. With one clamping bolt for size 50 or two bolts for size 80, and with two mounting bolts.

Article no. A B D G H J K L M N T V

6371-50101-506371-80101-80

4978

20.032.2

36.555.5

13.020.5

88

8.511.0

18.531.5

11.516.0

7xM58xM6

2xM62xM6

-23

17.523.0

Article no. A B C D G H J L M N T

6371-50110-506371-80110-80

4982

23.032.2

282x28

30.546.0

15.323.0

88

-16

-25

-4xM6

2xM62xM6

1216

Dimensions:

Application example, jaw width 80 mm:

Dimensions:

Jaw width 50 mm

Jaw width 50 mm

Jaw width 80 mm

Jaw width 80 mm

12

2006/22GB



Gripping jawsOrder

no. Article no. for jaw width A B Cg

300988301002

6371-4107-50-046371-4108-50-09 50 49 4

9 17 2351

301028301044

6371-4117-80-046371-4118-80-11 80 78 4

11 22 49135

304857 6371-12024-120-04 120 120 4 32 115

No. 6371 Gripping jaw, smoothHardened 60 HRC.

Orderno. Article no. for jaw width A B C

g

266569266585

6371-4103-50-096371-4104-50-12 50 49 9

12 17 5167

266841266866

6371-4113-80-116371-4114-80-18 80 78 11

18 22 133217

304832 6371-12018-120-15 120 120 15 32 430

No. 6371 Gripping jaw, smoothNot hardened, for individual processing.

Orderno. Article no. for jaw width A B C

g

300947266601

6371-4105-50-046371-4106-50-09 50 49 4

9 17 2151

300962266882

6371-4115-80-046371-4116-80-11 80 78 4

11 22 46133

305029 6371-12025-120-04 120 120 4 32 110

No. 6371 Gripping jaw, knurledHardened 60 HRC.

Orderno. Article no. for jaw width

ScrewDIN 7984

A B C H ±0.02g

305086305094305102

6371-100-50-126371-100-80-126371-100-120-12

5080

120

M5x20M6x20M6x20

4978

12012

172232

152030

70150350

No. 6371 Gripping jaw, with clawsHardened 60 HRC. Clamping edge height only 2 mm.

Accessories



2006

/22G

B

Orderno. Article no. Forme A B C

g

266627266643266668

6371-4201-50-0116371-4202-50-0126371-4203-50-013

A 49 3111213

111213

266684266700266726

6371-4204-50-0146371-4205-50-0156371-4206-50-016

A 49 3141516

161617

305045305060

6371-1216-120-0166371-1220-120-020 A 120 4 16

20580730

305052305078

6371-1224-120-0246371-1228-120-028 B 120 4 24

28790950

301069300871300897300913

6371-4351-80-0126371-4352-80-0136371-4353-80-0146371-4354-80-015

A 78 4

12131415

27303334

266908266577266593266619266635266650

6371-4355-80-0166371-4356-80-0176371-4357-80-0186371-4358-80-0196371-4359-80-0206371-4360-80-021

B 78 4

161718192021

353637404346

No. 6371 Support wedge

Orderno. Article no. B H L M

g

266742266676295006

6371-4220-506371-4380-806371-4380-1-80

161818

788

406078

6356980

No. 6371 Lateral stopfor base, central and clamping jaw.

Orderno. Article no. Fixation

g

300970300996

6371-4222-506371-4391-80 right 19

43

300939300954

6371-4221-506371-4390-80 left 19

43

No. 6371 Chip guard

Orderno. Article no. A

g

301010301036

6371-9010-106371-9012-12

1012

1617

301051301077

6371-9014-146371-9018-18

1418

1823

No. 6371 T-nut

for jaw width 50 mm

for jaw width 80 mm

for jaw width 120 mm

Form A

Form B

14

2006/22GB



... about Pneumatic Vice

Benefits at a glance:

• The pneumatic vice is specifically designed for the machining of single and series items that requirequick and precise clamping.

• The pneumatic operation significantly reduces the clamping time.

• The clamping force is adjustable to different work-piece requirements.

• All supports and guides are hardened (55-60 HRC) and ground.The supports are manufactured to a height tolerance of ±0.01 mm.

• Jaws are case-hardened (60 HRC)

• 4 slots facilitate the simple attachment of locators, gauges and special jaws.

• Jaw widths of 70 to 200 mm

• Clamping forces of up to 70 kN at 6 bar

Fixed jaw with T-slot

Threadsfor stops

Air supply

Replaceablegripping jaws

Clamping jaw with T-slot

Pre-adjustment bolt

T-slot for stop parts

Vice with modular carrier Vice with stepped gripping jaw

Pneumatic piston surface

Base element, Modular carrier and support



2006

/22F

Orderno. Article no. Jaw width A

[mm]Clamping force at 6 bar

[kN] g

301085301101301127

6372-0700-E0706372-0900-E0906371-1002-E100

7090

100

51015

8.51825

301143301168301184301200

6372-1150-E1156372-1301-E1306372-1600-E1606372-2000-E200

115130160200

22305070

303958

112

No. 6372 Base elementHardened 56 HRc.With 1 pair of gripping jaws, smooth, hardened 60 HRc.


g

301242301267301283

6372-3013-E0706372-3001-E0906372-3002-E100

174242306460

301309301341301366

6372-3003-E1156372-3005-E1606372-3006-E200

76701242024490

No. 6372 Modular carrier and supportHardened 56 HRc.

SizeA B C D E F G H I Stroke

K L M N O P SW

7090

100

404446

90112128

102128145

187241260

220288317

8710386

107133116

139177178

2.04.04.0

7092

105

M 6M 8M10

10.020.020.0

200288277

141818

81414

115130160200

606580

100

140160196236

145155160195

290315368475

340370403480

112127164235

142163200275

206229272361

3.23.54.04.5

105110115135

M10M10M10M12

20.020.018.520.0

300330366440

18181818

17171717

SizeA1 A B C C1 D D1 E E1 F F1 G G1 L

±0.01 M N

7090

100

90112128

566880

548091

405472

111414

7.08.5

10.5

28.533.036.0

111417

172828

11.014.017.0

111616

79

12

7092

105

48

10

243643

115160200

140196236

91126150

100120140

7484

100

171722

10.513.016.5

36.040.050.0

171723

353550

17.019.016.5

171722

121317

105115135

101216

465670

Dimensions:

Dimensions:

kg

Modular carrier: Support:

deep

deep deep

16

2006/22GB



Gripping jawsOrder

no. Article no.g

301176301192301218

6372-4048-E0706372-4041-E0906372-4042-E100

232352423

301234301259301275301291

6372-4043-E1156372-4044-E1306372-4045-E1606372-4046-E200

493771950

1790

Size A B C D E F G

7090

100

404446

323640

7.08.5

11.0

101515

111417

6.59.0

11.0

115130160200

606580

100

40454560

11.011.011.013.0

15181820

17171719

11.011.011.013.0

No. 6372 Gripping jaw, smoothHardened 60 HRc.


g

301317301333301358

6372-4071-E0706372-4073-E0906372-4074-E100

262322392

301374301390301416301432

6372-4075-E1156372-4076-E1306372-4077-E1606372-4078-E200

455720896

1661

Size A B C D E F G

7090

100

404446

323640

7.08.5

11.0

101515

111417

6.59.0

11.0

115130160200

606580

100

40454560

11.011.011.013.0

15181820

17171719

11.011.011.013.0

No. 6372 Gripping jaw, knurledHardened 60 HRc.

Dimensions:

Dimensions:

deep

deep

Gripping jaws



2006

/22G

B


g

301580301606301622

6372-4050-E0706372-4001-E0906372-4002-E100

235359426

301648301663301689301705

6372-4003-E1156372-4004-E1306372-4005-E1606372-4006-E200

495775955

1790

Size A B C ±0.01 D E ±0.01 F G

7090

100

404446

323640

7.08.5

11.0

101515

111417

6.59.0

11.0

115130160200

606580

100

40454560

11.011.011.013.0

15181820

17171719

11.011.011.013.0

No. 6372 Gripping jaw, smoothNot hardened, for individual processing.


g

301440301465301481

6372-4061-E0706372-4007-E0906372-4008-E100

262322392

301507301523301549301564

6372-4009-E1156372-4010-E1306372-4011-E1606372-4012-E200

455720896

1661

Size A B C ±0.01 D E ±0.01 F G H ±0.01 I K ±0.01

7090

100

404446

323640

7.08.5

11.0

101515

111417

6.59.0

11.0

344

2.53.03.0

899

115130160200

606580

100

40454560

11.011.011.013.0

15181820

17171719

11.011.011.013.0

4446

3.03.03.04.0

9131316

No. 6372 Gripping jaw, steppedHardened 60 HRc.

Dimensions:

Dimensions:

deep

deep

18

2006/22GB



Modular jaw and Gripping jawOrder

no. Article no.g

301382301408301424

6372-4057-E0706372-4031-E0906372-4032-E100

239305370

301093301119301135301150

6372-4033-E1156372-4034-E1306372-4035-E1606372-4036-E200

435697865

1620

No. 6372 Modular jawHardened 60 HRc.


g

301515301531301556

6372-4054-E0706372-4013-E0906372-4014-E100

262532708

301572301598301614301630

6372-4015-E1156372-4016-E1306372-4017-E1606372-4018-E200

822107912962260

Size A B C ±0.01 D E ±0.01 F G H

7090

100

404446

323640

79

11

182628

111417

142022

13.320.320.3

115130160200

606580

100

40454560

11111113

28282828

17171719

22222222

20.320.324.323.8

No. 6372 Gripping jaw, V-blockHardened 60 HRc.

Size A B C ±0.01 D E ±0.01 F G I ±0.01 K ±0.01

7090

100

404446

323640

7.08.5

11.0

101515

111417

6.59.0

11.0

2.53.03.0

202223

115130160200

606580

100

40454560

11.011.011.013.0

15181820

17171719

11.011.011.013.0

3.03.03.04.0

23282837

Dimensions:

Dimensions:

deep

deep

Stepped jaw and Angle jaw



2006

/22G

B


g

301721301747301762

6372-4055-E0706372-4019-E0906372-4020-E100

239305370

301788301457301473301499

6372-4021-E1156372-4022-E1306372-4023-E1606372-4024-E200

435697865

1620

No. 6372 Stepped jawHardened 60 HRc.


g

301655301671301697

6372-4056-E0706372-4025-E0906372-4026-E100

382877

1320

301713301739301754301770

6372-4027-E1156372-4028-E1306372-4029-E1606372-4030-E200

1481220033005800

Size A B C ±0.01 D E F G I ±0.01 K ±0.01 N

7090

100

566880

405472

6.56.5

11.0

323640

111417

79

12

243042

121618

243643

115130160200

91100126150

747684

100

11.011.013.013.0

40454560

17171919

12121313

48445268

17202025

46465670

No. 6372 Angle jawHardened 60 HRc.

Size A B C ±0.01 D E F G H ±0.01 K ±0.01 L ±0.01 M ±0.01 N ±0.01

7090

100

566880

476585

6.58.5

11.0

243643

111417

79

12

182530

101316

152126

192232

395468

115130160200

91100126150

8590

100118

11.011.013.013.0

46465670

17171919

12121313

28353850

16171830

24313042

32403656

717282

100

Dimensions:

Dimensions:

Application example:

Application example:deep

deep

20

2006/22GB



AccessoriesOrder

no. Article no. A B C D E F Lg

301804301796

6372-5003-E070-E0906372-5001-E100-E200

2838

2630

1317

1116

1618

3034

5660

135226

No. 6372 Double-ended clamp

Orderno. Article no. A B C D E F G L M

g

301846301820

6372-5006-E070-E0906372-5002-E100-E200

2650

1619

1215

3347

2550

1321

1116

89125

1212

278524

No. 6372 Straight clamp


g

301861 6372-5004 643

No. 6372 Stop


g

301903 6372-6001 1037

No. 6372 Pneumatic valve


g

301929 6372-6002 1079

No. 6372 Air-preparation unit

Index...


2006

/22G

B

…by Article no.

…by Order no.

Article no. Page Article no. Page Article no. Page Article no. Page6371-100-50-12 126371-100-80-12 126371-100-120-12 126371-1216-120-016 136371-1220-120-020 136371-1224-120-024 136371-1228-120-028 136371-4101-50 86371-4102-50 106371-4103-50-09 126371-4104-50-12 126371-4105-50-04 126371-4106-50-09 126371-4107-50-04 126371-4108-50-09 126371-4109-50 106371-4110-80 106371-4111-80 86371-4112-50 96371-4113-80-11 126371-4114-80-18 126371-4115-80-04 126371-4116-80-11 126371-4117-80-04 126371-4118-80-11 126371-4119-80 106371-4120-50 86371-4121-80 86371-4201-50-011 136371-4202-50-012 136371-4203-50-013 136371-4204-50-014 136371-4205-50-015 136371-4206-50-016 136371-4220-50 136371-4221-50 136371-4222-50 13

6371-4300-80 96371-4351-80-012 136371-4352-80-013 136371-4353-80-014 136371-4354-80-015 136371-4355-80-016 136371-4356-80-017 136371-4357-80-018 136371-4358-80-019 136371-4359-80-020 136371-4360-80-021 136371-4380-80 136371-4380-1-80 136371-4390-80 136371-4391-80 136371-9010-10 136371-9012-12 136371-9014-14 136371-9018-18 136371-12001-120 86371-12002-120 86371-12018-120-15 126371-12024-120-04 126371-12025-120-04 126371-50101-50 116371-50105-50 96371-50110-50 116371-80101-80 116371-80107-80 96371-80110-80 116371G-50 66371G-80 66371G-120 66372-0700-E070 156372-0900-E090 156372-1002-E100 156372-1150-E115 15

6372-1301-E130 156372-1600-E160 156372-2000-E200 156372-3001-E090 156372-3002-E100 156372-3003-E115 156372-3005-E160 156372-3006-E200 156372-3013-E070 156372-4001-E090 176372-4002-E100 176372-4003-E115 176372-4004-E130 176372-4005-E160 176372-4006-E200 176372-4007-E090 176372-4008-E100 176372-4009-E115 176372-4010-E130 176372-4011-E160 176372-4012-E200 176372-4013-E090 186372-4014-E100 186372-4015-E115 186372-4016-E130 186372-4017-E160 186372-4018-E200 186372-4019-E090 196372-4020-E100 196372-4021-E115 196372-4022-E130 196372-4023-E160 196372-4024-E200 196372-4025-E090 196372-4026-E100 196372-4027-E115 196372-4028-E130 19

6372-4029-E160 196372-4030-E200 196372-4031-E090 186372-4032-E100 186372-4033-E115 186372-4034-E130 186372-4035-E160 186372-4036-E200 186372-4041-E090 166372-4042-E100 166372-4043-E115 166372-4044-E130 166372-4045-E160 166372-4046-E200 166372-4048-E070 166372-4050-E070 176372-4054-E070 186372-4055-E070 196372-4056-E070 196372-4057-E070 186372-4061-E070 176372-4071-E070 166372-4073-E090 166372-4074-E100 166372-4075-E115 166372-4076-E130 166372-4077-E160 166372-4078-E200 166372-5001-E100-E200 206372-5002-E100-E200 206372-5003-E070-E090 206372-5004 206372-5006-E070-E090 206372-6001 206372-6002 20

Order no. Page Order no. Page Order no. Page Order no. Page265793 8265835 10266569 12266577 13266585 12266593 13266601 12266619 13266627 13266635 13266643 13266650 13266668 13266676 13266684 13266700 13266726 13266742 13266809 8266825 10266841 12266866 12266882 12266908 13290635 8290650 8295006 13300863 10300871 13300889 10300897 13300905 9300913 13300921 9300939 13300947 12300954 13300962 12300970 13300988 12300996 13

301002 12301010 13301028 12301036 13301044 12301051 13301069 13301077 13301085 15301093 18301101 15301119 18301127 15301135 18301143 15301150 18301168 15301176 16301184 15301192 16301200 15301218 16301234 16301242 15301259 16301267 15301275 16301283 15301291 16301309 15301317 16301333 16301341 15301358 16301366 15301374 16301382 18301390 16301408 18301416 16301424 18

301432 16301440 17301457 19301465 17301473 19301481 17301499 19301507 17301515 18301523 17301531 18301549 17301556 18301564 17301572 18301580 17301598 18301606 17301614 18301622 17301630 18301648 17301655 19301663 17301671 19301689 17301697 19301705 17301713 19301721 19301739 19301747 19301754 19301762 19301770 19301788 19301796 20301804 20301820 20301846 20301861 20

301903 20301929 20304733 6304758 6304766 6304774 6304782 6304790 6304808 6304816 6304824 6304832 12304840 6304857 12304881 6304873 6304899 6304907 6304915 6304923 6304931 9304949 6304956 9304964 6304972 11304980 8304998 11305003 10305011 11305029 12305037 11305045 13305052 13305060 13305078 13305086 12305094 12305102 12

22

2006/22GB


Genius, first positioning system for laser marking

Are you also tired of complicated manual positioning on your laser marking machine?

Tiring work! High costs due to long set-up times!

No repeatability! Complicated re-positioningfor each order!

! ! ! !

With the new AMF positioning system, AMF offers you a solution to all of these problems!

Building-block principle

Drawer system (fixed or sliding positioning base plate)

Positioning accuracy 0.1 mm

Repeatability 0.1 mm

Modular structure

Ergonomic

Conditions for Sales, Deliveries


2006

/22G

B

These conditions of sale apply to business conducted with companies, legal entities inthe public sector, and legal entities with special budget in the public sector. Our deliveries and services are carried out exclusively on the basis of the conditions statedbelow. Deviating purchasing conditions of the buyer will not become part of the contract, not even through acceptance of the order, unless we have expressly accep-ted them.

1. Offer and entering into a contractThe basis of our delivery contracts is the latest edition of our catalogue. Orders are notconsidered as accepted until they have been confirmed by us in writing. When goodsare supplied from stock and, for organisational reasons, you receive no separate confirmation, the invoice has the additional function of confirming the order. Details ofdimensions and weights, and illustrations, drawings and data are not binding and maybe changed by us at any time. Deviations cannot be excluded.

2. PricesPrices are quoted in EUR ex-works excluding turnover tax, packing, freight, carriage,and insurance. Unless otherwise agreed, our list prices on the day of delivery apply. Inorder to cover our costs, orders under EUR 50,– net value are subject to a small ordersurcharge of EUR 10,–.

3. DeliveryDelivery delays are quoted to the best of our knowledge but without guarantee. Agreeddelivery delays begin on the day we accept the order and refer to the completion of thegoods in our works.

4. Transfer of riskRisks are transferred to you when the goods are passed to a specific person, company, or organisation that is charged with the execution of carriage of the goods.This applies also to partial deliveries and when we have accepted the costs of carriage,delivery or erection. The risks are also transferred to you when you have defaulted onacceptance.

5. DispatchGoods are supplied ex-works. Dispatch is at your cost and risk. Scheduled, FOB, andCIF deliveries are also at your risk. In the absence of specific instructions concerning dispatch, we will arrange same as we think fit, but without accepting any responsibilityfor choosing the cheapest or most suitable method of dispatch. We make a handlingcharge of EUR 5,– if goods are sent at your request to a third party.You accept that your order can be supplied in partial deliveries insofar as this is reasonable.

6. Reservation of proprietary rightsGoods delivered remain our property until payment of all claims has been received in fullor until redemption of cheques given in payment. The cancellation of individual positionsin an open invoice and the drawing of a balance and its acceptance do not affect proprietary rights. You have the right to dispose of the goods as a normal commercialtransaction, but you are forbidden to pawn, mortgage, or transfer ownership of them insettlement of a debt or debts. You surrender to us herewith your right to payment for goods for which we reserve ourproprietary rights. You have the right to collect these payments as long as you meetyour obligations to us. If we request it, you are obliged to name the third party and wehave the right to publish this information and the transfer of rights.

7. Cancellation rights due to late payment or insolvencyIf you do not pay for the goods by the time payment is due, and if you have not paidafter expiry of a reasonable time limit set by us, we have the right to withdraw from thecontract and demand the return of goods already supplied. Rights under § 323 BGB(BGB = German civil law code) remain otherwise unaffected.Application for the opening of insolvency proceedings gives us the right to withdrawfrom the contract and demand the immediate return of goods supplied before the bank-ruptcy court orders protective measures.

8. PackagingPackages comply with the German packaging regulations (WO). Disposable packagingis charged at cost. The packaging is not returnable.

9. Tooling costsIn the absence of any agreement to the contrary, tooling made for the execution of anorder remains our property in all cases. This applies even if we have made a charge fora proportion of the tooling costs.

10. PaymentOur invoices are payable net within 30 days of the date of the invoice, or with 2%

discount if paid within 10 days. Invoices below EUR 50,– are payable immediately without discount. Our credit notes and your charges on us reduce the amount subject to discount. Late payment entitles us to interest at the rate the bank charges us for a current accountoverdraft but at least 8 percent above the current base rate of the European CentralBank. If payment is overdue, we are entitled, after giving you notice in writing, to ceasefulfilling our obligations under the contract until payment is received.

11. Offsetting exclusionYou can only offset payments with legally-established or unopposed counter claims.

12. GuaranteeIf you come to an agreement with us on properties of the goods, we include this agreement in our technical specifications. If we have to supply to your drawings, specifications, samples, etc., you accept the risk associated with suitability for the intended purpose. The point in time at which risk is transferred is decisive for the contractual condition of the goods. The deterioration of parts subject to wear in thecourse of normal use does not constitute a defect.If the goods supplied are defective, we will – at our choice and within a reasonable timelimit set by you – supply a replacement or repair the goods. If such repair or replacement is not satisfactory, you have the right to reduce the price or withdraw fromthe contract. Any further guarantee claims are excluded. Recognisable defects must benotified at the latest within 10 days of receipt and defects that are not recognisable mustbe notified as soon as they are discovered. The guarantee period is 24 months andstarts with dispatch of the goods from our works.

13. Hindered or impossible performanceIf we are prevented from meeting our obligation by some unforeseeable event (e.g. disruption of our plant, or delay in the delivery of important raw materials), which,in spite of taking all reasonable care appropriate to the circumstances of the case, wehave been unable to avert, and it has become impossible to execute the delivery or ser-vice punctually, the delivery delay will be extended to an appropriate extent.

14. LiabilityExcept in the case of injury to life or limb, or damage to health caused by our breach ofduty, we are only liable in the event of intent or culpable negligence on our part.

15. Customer specialsOrders for customer specials must be in writing and include binding details of execution, quantities etc. For technical reasons we reserve the right to supply 10% moreor less than the quantity specified. If technical changes or cancellation are required, the costs incurred will be charged tothe customer.

16. Deliveries of samples and return of goodsSamples will be charged. When goods have been sent for testing or as samples, we willcredit you with the additional price against subsequent orders, as long as the net contract value is at least EUR 125,–. The return of goods is only possible with prior agreement. Customer specialsmay not be returned. For goods returned for reasons outside our responsibility (e.g. wrongly ordered), we charge 10% of the value of the goods but at least EUR 7.50, to cover administration costs.

17. Place of fulfilment, court of jurisdictionThe place of fulfilment for all obligations arising from this contract is D-70707 Fellbach. The court of jurisdiction for any legal dispute arising from this contract is D-71332Waiblingen.(All disputes that arise from this contract or about its validity will be decided by a courtof arbitration according to the Arbitration Rules of the German Committee for ArbitrationCourts/Settlement and Arbitration Procedure of the International Chamber ofCommerce. Such decisions will be final and normal legal procedures are excluded.)German law applies (BGB and HGB = civil and commercial codes). The application ofUN purchasing law (CISG) is excluded.

18. Validity clauseIf individual conditions should be found to be not legally valid, the remaining conditionscontinue to apply. The invalid conditions will be replaced by conditions which fulfil as closely as possible the commercial intent of the contract with reasonable considerationof the interests of both parties. With the publication of these Conditions for Sales, Deliveries and Payment, all previousversions become invalid. This does not apply to contracts agreed before publication.

Multiple-Clamping System Pneumatic Vice

Documents