Laser Enclosure to Elevated Rail AssemblyWyman Gordon Forging LocatorOriginal Revision: 2/14/2013

Before & After

Step 1: Attach Bolts to Rail Attachment

Loosely attach bolts on both sides of

elevated rail attachments.

Step 2: Attach Elevated Rail to Laser Enclosure

Slide the elevated rail from the front of the enclosure bracket

to the back by placing the connected nut and bolt into

the track on the bracket

Step 3: Alignment

Align the elevated rail and bracket by positioning the

front rail attachment flush to the front of the enclosure

bracket

Final Step: Tighten Bolts

Tighten bolts in the rail attachment to

the enclosure bracket to finish

assembly