Kingframe SFS Steel Framing Systems Design GuideSeptember 2017
Steel Building Solutions UK & Republic of Ireland
2 Kingframe SFS Design Guide
Steel Building Solutions
4 5Kingframe SFS Design Guide
Kingframe SFS Design Guide
Steel Building Solutions
Steel Building Solutions
IntroductionIntroduction
SFS is a lightweight cold-rolled galvanised steel framing system
that is assembled on-site.
Bene ts– High build speed, quickly achieving a watertight shell and
enabling follow-on trades thereby saving on cost.
– Lightweight, sustainable and safe.
e tu es– Quick and easily installed cladding support system.
– Rapidly achieves a watertight frame enabling follow-on trades.
– Full in-house design, from frozen data ensuring a prompt start on-site.
un tion– Provides a fully designed lightweight cladding frame as an
alternative to traditional builds.
and external cladding systems.
– Capable of achieving high spans and forming complex curves
14 15Kingframe SFS Design Guide
Kingframe SFS Design Guide
Steel Building Solutions
Steel Building Solutions
Technical ManualTechnical Manual
A Technical Guide to the Kingframe SFS System
Quality & Cost– Precision engineered products which are dimensionally stable
– Incorporates a vast array of architectural treatments and
Building Physics2
Features
Speed of Build
– Rapid dry envelope – reduced time to achieve a watertight
Design
Sustainability– High strength to weight ratio and therefore reducing
Introduction Technical Manual
Introduction 4Introduction 4
Business Case 6
Technical Summary 8
Service & Support 10
Technical Manual 14System Overview 20
SFS Standard Components 26
SFS Standard Fixings 36
Oversail SFS 42
Typical Details 44
Cladding Treatments 70
COSHH & Technical Data 76
Kingspan Steel Building Solutions Support Services 79
Kingframe High Bay Walls 80
KingPin® Rainscreen Support System 82
Kingspan QuadCore Karrier Panel System 84
Unitised SFS Façade 85
3Kingframe SFS Design Guide
Steel Building Solutions
Installer Information Design & Estimating Software
Installer Information 86 SFS In nity Design & Estimating Software 92
Building Information Modelling (BIM) 94
86 87Kingframe SFS Design Guide
Kingframe SFS Design Guide
Steel Building Solutions
Steel Building Solutions
Installer InformationInstaller Information
– Health & Safety – Cleats, Brackets & Ancillaries
– Quality Control
– COSHH & Technical Datasheets
Features
92 93Kingframe SFS Design Guide
Kingframe SFS Design Guide
Steel Building Solutions
Steel Building Solutions
Features®
Pro ide in nite functionality, design and s eci cation solutions
4 Kingframe SFS Design Guide
Steel Building Solutions
Introduction
SFS is a lightweight cold-rolled galvanised steel framing system
that is assembled on-site.
Features– Quick and easily installed cladding support system.
– Rapidly achieves a watertight frame enabling follow-on trades.
– Full in-house design, from frozen data ensuring a prompt start on-site.
5Kingframe SFS Design Guide
Steel Building Solutions
Introduction
Bene ts– High build speed, quickly achieving a watertight shell and
enabling follow-on trades thereby saving on cost.
– Lightweight, sustainable and safe.
Function– Provides a fully designed lightweight cladding frame as an
alternative to traditional builds.
and external cladding systems.
– Capable of achieving high spans and forming complex curves
6 Kingframe SFS Design Guide
Steel Building Solutions
Introduction - Business Case
Speed of build– Risk to the client is reduced through predictability and
on investment in comparison to traditional building methods.
– Rapid dry envelope – SFS assists in reducing the time to achieve a watertight structure when compared to traditional building methods. This facilitates earlier access for follow–on trades which subsequently reduces the build programme.
Sustainability
and therefore reduces material usage over traditional materials.
– Steel sections are 100% recyclable. This is increasingly important as the lifetime environmental impact of buildings is further scrutinised to meet tighter
– Light gauge steel reduces the overall weight of walling relative to blockwork reducing loads imposed on foundations.
Quality and Cost– Lightweight cold-rolled steel sections are precision
engineered products manufactured to tight tolerances ensuring exact performance resulting in less time spent on-site correcting errors and solving problems.
shrinkage.
– Tight tolerances – high dimensional accuracy of construction gives long term reliability.
– The rapid construction characteristic of Kingframe SFS
compared to traditional building methods.
– SFS can incorporate a vast array of architectural treatments and features and allows large spans and large structural openings to be formed with reduced requirement for windposts.
– ‘Just-in-time’ – delivery of components as needed allows construction on tight sites, lowering costs in site management and storage facilities.
– Kingframe SFS has been assessed and is CE Marked in line with the Kingspan Declaration of Performance No: CPR-2013.SFS.001. Covered by Harmonised Standard BS EN 1090-1:2009+A1:2011.
Design– If requested, schemes can be fully detailed prior to rolling, exposing potential clashes at the design stage thereby resolving them before they become costly problems on-site.
– If required, our in-house design team can be involved at all
solution.
7Kingframe SFS Design Guide
Steel Building Solutions
Introduction - Business Case
Design Fle ibility, Aesthetic Appeal
Quality & Cost
SustainabilitySpeed of Build
8 Kingframe SFS Design Guide
Steel Building Solutions
Introduction - Technical Summary
Slotted Stud De ection ead DetailPurpose > The SFS slotted stud detail is used to accommodate
amb Construction Single Slotted Stud & rap around TracPurpose > SFS opening constructions can be designed to incorporate tall vertical spans facilitating the use of
environments.
intel ConstructionPurpose > SFS can incorporate most structural openings with both narrow and wide horizontal spans.
Base Trac to Concrete Connection
to ensure integrity.
Cill ConstructionPurpose > SFS sections are designed to form window cills
accommodating both narrow and wide horizontal spans.
ersail estraint Detail
continuous unbroken façade facilitating various
1
1
2
3
4
5
6
2
3
5
6
between a hot rolled or concrete frame and oversail systems which
frame.
4
9Kingframe SFS Design Guide
Steel Building Solutions
1
2
3
4
5
10 Kingframe SFS Design Guide
Steel Building Solutions
Introduction - Service & Support
Depending on the characteristics of the project, Kingspan are able
service and support.
Proposal– Upon receipt of a request for SFS, Kingspan create a proposal
detailing and any non-standard details.
– This document can be used to price the work and becomes the basis for proceeding to Basic or Full Design.
NB: Load bearing structures are outside the scope of this document - Seek advice from Kingspan Technical Department.
Design Ser ice Critical Success Factor Early In ol ement
7 Days
Proposal
Design appraisal > Feasibility study > Bay Design > Proposal document
Feedback to client > Requests for information
> Issued for comments
CLIENT APPROVAL
Structural Appraisal
2–4 Weeks 3–6 Weeks
6-9
Design rder
Design Freeze
Approval Issue
Beswic , Manchester, UK
Time lines noted are indicative only. Each scheme is assessed and works are programmed wherever possible to meet the demands of the site programme.On larger schemes phasing the works can assist in this area.
11Kingframe SFS Design Guide
Steel Building Solutions
Introduction - Service & Support
Full Drawing Information– Kingspan are able to provide detailed plan, section and
elevation drawings for the areas of SFS on the project so there is no doubt what the framing sections are for any given part of the building. Kingspan also ensures that its drawings are passed through the relevant approval procedures, so that installation proceeds with the assurance that it has been approved by the project architect, and that they are available for submission to the client as part of the CDM and O&M requirements.
Project Management Support– Kingspan understands that you cannot accurately estimate
cost for every possibility on a project and that programmes can vary due to the unpredictable nature of site. Kingspan is your representative in the design decision making process and will always serve your interests to prevent cost and the programme from over-running. Kingspan has gained
country’s largest and most prestigious construction projects.
Full Design Ser ice
e loo at e ery aspect of your project when underta ing full design and for that reason, e ery project is assessed on its own merits so we can o er the most e cient and coste ecti e solution for you
Detailed Structural Calculations
Kingspan can provide detailed calculations to the relevant codes of practice for submission to Building Control.
Site ando er
the start of every project Kingspan issue a copy of the Technical and Installation manuals. This ensures that the client is aware of the design requirements of the SFS system. A Designers Risk Assessment is also issued to highlight care points for site erectors.
Site Inspection For peace of mind that the SFS has been installed correct to the Kingspan Drawings we can perform a site inspection, highlighting any areas which may require remediation to site personnel. We will then follow up with a detailed site report outlining areas where work is required.
> Revised to comments
CLIENT APPROVAL
Material Order
1 Week 2 Weeks
weeks depending on client approval times
Construction Issue
Site Erection
12 Kingframe SFS Design Guide
Steel Building Solutions
Product Scope and Summary of Certi cateKingspan have developed a fully integrated management system which combines all the common elements of ISO 9001: 2015 (Quality Management), ISO 14001: 2015 (Environmental Management) and OHSAS 18001: 2007 (Occupational Health and Safety Management) into one system. This simple coherent business management system enables the organisation to successfully achieve its purpose and mission to ensure that quality, health and safety and the environment are considered in all aspects of the business process.
Kingframe SFS has been assessed and is CE Marked in line with the Kingspan Declaration of Performance No: CPR-2013.SFS.001. Covered by Harmonised Standard BS EN 1090-1:2009+A1:2011
SCI assessed design engine
13Kingframe SFS Design Guide
Steel Building Solutions
14 Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual
A Technical Guide to the Kingframe SFS System
Features
Speed of Build– Quick and easily installed cladding support system.
structure.
15Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual
Quality & Cost
– High dimensional accuracy.
features.
Building Physics2
Design
– Components fully detailed and engineered prior to rolling.
Sustainability
material.
– A ratings in the BRE Green Guide.
Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Document Guide
SFS Designer’s Risk Assessment
http://www.kingspanpanels.co.uk/sbs/resource-centre/
Product Brochure
http://www.kingspanpanels.co.uk/sbs/resource-centre/
Technical & Installation Manual
SFS framing.
http://www.kingspanpanels.co.uk/sbs/resource-centre/
British Board of Agr ment (BBA) Certi cate
http://www.kingspanpanels.co.uk/sbs/resource-centre/
guidance on the correct application of design and engineering principles of the Kingframe Steel Framing System.
17Kingframe SFS Design Guide
Steel Building Solutions
Operational Energy Savings
Paris Agreement.
construction professionals.
standards and national codes of practice. Testing is generally
carries a further complication in that the formation of
appropriately and the likelihood of condensation forming on internal surfaces is also increased. The methods for calculating
methods used for these processes are mathematically complex
Recyclability
of the steel content.
terms of cost and material consumption.
elements.
18 Kingframe SFS Design Guide
Steel Building Solutions
BREEAM
SCI Certi cation
product is fully tested and accredited.
SCI Assessed
NHBC
Waste Streams
Guaranteed Performance
Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Contents
Typical Details 44
Cladding Treatments 70
Insulated Render 71Terracotta Rainscreen 72Dri-Design Aluminium Rainscreen
Kingspan QuadCore Karrier Panel
Product Hazards 76
COSHH Data 77
Kingspan Steel Building Solutions Support Services 79
Kingframe High Bay Walls 80
KingPin® Rainscreen Support System 82
Kingspan QuadCore Karrier Panel System 84
Unitised SFS Façade System 85
System Overview 20
Design Considerations 23Design Guidance 24
SFS Standard Components 26
Kingspan Section Range 27Secondary Products 27
Ancillary Products 34
SFS Standard Fixings 36
In ll SFS 40
Additional Details 41
Oversail SFS 42Design Principles 42
Splicing of Sections 42 Structural Openings 42
Additional Details 42 Fixings 42
Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Document Guide
External References
Industry / Regulatory Bodies
http://www.steel-sci.org/
http://www.the s.org/
http://www.steelconstruction.org/
http://www.bre.co.uk/
http://www.bbacerts.co.uk
http://www.nhbc.co.uk/
http://www.communities.gov.uk/planningandbuilding/
Publications
of Practice for Design of Cold Formed Thin Gauge Sections.
and channels for stud and sheet partitions and linings using
for cold forming.
21Kingframe SFS Design Guide
Steel Building Solutions
22 Kingframe SFS Design Guide
Steel Building Solutions
installation contractor and not Kingspan.
industrial properties.
structural frame if the correct tolerance scheme is adopted.
Both systems achieve early weather protection of the building allowing other internal tting trades to work inside the structure and removing external cladding from the critical path. Furthermore, these systems also provide lateral support to most cladding materials including masonry, pro led metal sheets, proprietary panels, insulated render systems, terracotta and timber rain screen systems. It should be noted that SFS is not intended to provide vertical support for masonry façades.
external façade.
23Kingframe SFS Design Guide
Steel Building Solutions
the SFS.
Building Regulation RequirementsThe installer should refer to the main contractor and the
Design Considerations
Design Life
of the façade insulation applied to the external face of the SFS.
1 is that a design life
1
Maximum de ection Span between supporting columns
360
24 Kingframe SFS Design Guide
Steel Building Solutions
Design Guidance
® Mounting Brackets.
25Kingframe SFS Design Guide
Steel Building Solutions
inspection.
statement for handling of long span studs. Consider
system.
Assessment and the SFS Installation Manual.
any risk to the installer during construction of the SFS. Kingspan
Construction (Design & Management) (CDM)
Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - SFS Standard Components
T Li
T
FF
T
B
A CC
B
A
T
Basic Components
2.
2 2.
‘C’ Section Stud
Angles, Cleats & Brackets ‘Z’ Bar
Flat Straps
‘U’ Section Track
27Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - SFS Standard Components
Kingspan Section Range
Secondary Products
Section Ref. Weight (kg/m) A (mm) B (mm) C (mm) T (mm)
Angles & Cleats
Brackets
Strap Products
‘Z’ Bar Products
KingPost 15kg eachOversail Cleats
C 100 050 120
U 104 055 120
FS 100 ~ 12
B 135 105 60
L 70 50 20
L 70 50 20 L
28 Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - SFS Standard Components
‘C’ Section Range3
3
Dimensions Gross
xx Iyy 2 4 4
ri
SCI assessed design engine
Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - SFS Standard Components
Section Major Axis Bending Minor Axis Bending Compression
rx ry Zxx Zyy Ixx Zxx3 3 2
4 3
Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - SFS Standard Components
3
‘C’ Section Range3
Gross Iyy 3 4
ri 2
SCI assessed design engine
31Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - SFS Standard Components
I iy i Iyy NZ Q4 3 3
4 3
32 Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - SFS Standard Components
‘U’ Section Range4
xx Iyy 2 4 4
ri
4
33Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - SFS Standard Components
rx ry Zxx Zyy Ixx Zxx3 3 2
4 3
34 Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - SFS Standard Components
4
Ancillary Products
‘U’ Section Range4
Gross Iyy 3 4
ri 2
SCI assessed design engine
35Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - SFS Standard Components
I iy i Iyy NZ Q4 3 3
4 3
Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - SFS Standard Fixings
Application Supplier Product Code Description Tools Picture
Self tapping TEK
Self tapping TEK
Self tapping TEK
Self tapping TEK
Self tapping TEK
Self tapping
Self tapping
Self tapping TEK
SFS to SFS Connections Flush nish
SFS to SFS Connections Non ush
nish
SFS to Hot Rolled Steel Flush nish4mm to 12.5mm
37Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - SFS Standard Fixings
SFS to Hot Rolled Steel Non ush
nish
12.5mm HRS
SFS to Hot Rolled Steel Connections
HRS
Application Supplier Product Code Description Tools Picture
Self tapping
Self tapping
Self tapping
Self tapping
Self tapping
38 Kingframe SFS Design Guide
Steel Building Solutions
Application Supplier Product Code Description Tools Picture
SDS Drill
SDS Drill
SDS Drill
expanding anchor
expanding anchor
Technical Manual - SFS Standard Fixings
Recommended Fixings
Bracket to Hot Rolled Steel Connections5mm to 8mm
SFS to Concrete Connections
concrete
Bracket to Concrete
to Concrete
Kingframe SFS Design Guide
Steel Building Solutions
Application Supplier Product Code Description Tools Picture
insulation thickness
Board to max. 2.25mm Phillips No.2 SFS sections
Board to max. 2.25mm Phillips No.2 SFS sections
SFS sections Phillips No.3
and hot rolled steel up to Phillips No.3 12mm gauge
Technical Manual - SFS Standard Fixings
Brick tie channels to SFS
Sheathing Board / Timber to SFS
steel gauge prior determines the
Kingspan engineers
Rigid phenolic insulation board to SFS
Internal Lining: Plasterboard / Chipboard / Ply / OSB to SFS
Kingframe SFS Design Guide
Steel Building Solutions
Design Principles
Structural Openings
Splicing of Sections
the default.
Type 3 – Block and Bracing
section.
Type 4 – Head Track Blocking
Masonry Cladding
the element useless and result in damage to the local area.
41Kingframe SFS Design Guide
Steel Building Solutions
Colour-coded Stud
coding to SFS to simplify site installation for contractors.
making costly remediation
matching those used in our ®
location.
construction.
Additional Details
– Braced Bays
– Brise Soleil
Please contact the Technical Department for Further Information.
Figure 1 - Typical head track detail
42 Kingframe SFS Design Guide
Steel Building Solutions
Design Principles
Splicing of Sections
Structural OpeningsStructural openings are formed in the same manner as the
of the technical manual.
Please refer to guidance on page 38.
Additional details
– Braced Bays
– Brise Soleil
Please contact the Technical Department for Further Information.
Fixings
43Kingframe SFS Design Guide
Steel Building Solutions
44 Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Typical Details
‘A’ Series – Basic Connections
System Applications:
Components:
System Conditions:
Fixing Type Connection Description
uncracked concrete
Notes
45Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Typical Details
‘A’ Series – Basic Connections
System Applications:
Components:
System Conditions:
Fixing Type Connection Description
OR
Notes
Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Typical Details
‘A’ Series – Basic Connections
System Applications:
Components:
Fixing Type Connection Description
uncracked concrete
Notes
47Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Typical Details
‘A’ Series – Basic Connections
System Applications:
Components:
Fixing Type Connection Description
Notes
48 Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Typical Details
‘A’ Series – Basic Connections
System Applications:
Components:
Fixing Type Connection Description
Notes
Gap
Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Typical Details
System Applications:
Components:
Fixing Type Connection Description
Notes
‘A’ Series – Basic Connections
Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Typical Details
‘A’ Series – Basic Connections
System Applications:
Components:
Fixing Type Connection Description
Notes
51Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Typical Details
System Applications:
Components:
Fixing Type Connection Description
OR
Hot rolled section
Notes
‘A’ Series – Basic Connections
52 Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Typical Details
‘A’ Series – Basic Connections
System Applications:
Components:
Fixing Type Connection Description
Notes
53Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Typical Details
‘B’ Series – Construction Details
System Applications:
Components:
System Conditions:
Fixing Type Connection Description
Notes
54 Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Typical Details
System Applications:
Components:
System Conditions:
Fixing Type Connection Description
Notes
‘C’ Series – Opening Construction
55Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Typical Details
System Applications:
Components:
System Conditions:
Fixing Type Connection Description
Notes
‘C’ Series – Opening Construction
Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Typical Details
‘C’ Series – Opening Construction
System Applications:
Components:
System Conditions: Typically located at patio doors.
Fixing Type Connection Description
Notes
min.
117mm Max55mm Min
57Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Typical Details
‘C’ Series – Opening Construction
System Applications:
Components:
System Conditions: small spans.
Fixing Type Connection Description
Notes
58 Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Typical Details
‘C’ Series – Lintel zone less than 600mm deep
System Applications:
Components:
Fixing Type Connection Description
Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Typical Details
‘C’ Series – Opening Construction
System Applications:
Components:
System Conditions: small spans.
Fixing Type Connection Description
Notes
Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Typical Details
‘C’ Series – Opening Construction
System Applications:
Components:
System Conditions:
Fixing Type Connection Description
Notes Head Connection
Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Typical Details
‘C’ Series – Opening Construction
System Applications:
Components:
System Conditions:
Fixing Type Connection Description
Notes Base Connection
Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Typical Details
Kingpost - Lintel Connection
each side of post
post position only
Building Solutions.
cripple stud 2mm Min. gauge.
hatch highlighted holes only.
Fixings to primary steel through cross-hatch highlighted holes
5.5mm TEKS to each track.
Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Typical Details
Kingpost - Cill Connection
at post position only
each side of post
Building Solutions.
cripple stud 2mm Min. gauge.
hatch highlighted holes only.
Fixings to primary steel through cross-hatch highlighted holes
5.5mm TEKS to each track.
Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Typical Details
In ll Framing - Head Track Fixing to PFC Parapets
A.25a SFS Track Fixing to Parapet PFC
A
BA
SFS Angle Fixing to Parapet PFC
Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Typical Details
System Applications:
Components:
System Conditions:
Fixing Type Connection Description
Notes
‘D’ Series – Oversail Details
Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Typical Details
‘D’ Series – Oversail Details
System Applications:
Components:
System Conditions:
Fixing Type Connection Description
design only
Notes
Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Typical Details
‘D’ Series – Oversail Details
System Applications:
Components:
System Conditions:
Fixing Type Connection Description
design only
Notes
Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Typical Details
‘D’ Series – Oversail Details
System Applications:
Components:
System Conditions:
Fixing Type Connection Description
design only
OR
Notes
Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Typical Details
‘F’ Series – Finishes Details
System Applications:
Components:
System Conditions:
Notes
Additional Stud
See note 2 regarding Rainscreens
Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Cladding Treatments
Masonry
Brick Tie Studs
NHBC
Kingspan SFS stud
deferred to in all instances.
71Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Cladding Treatments
Insulated Render
Direct Applied Systems
system adopt principles for Terracotta Rainscreen.
Kingspan SFS stud
Kingspan Kooltherm®
Bedding mortar and reinforcing mesh
72 Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Cladding Treatments
Kingspan Kooltherm® K15 Rainscreen Insulation
Kingspan Kingpin®
Kingspan SFS stud
Terracotta Rainscreen
supporting rails.
73Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Cladding Treatments
Dri-Design Metal Façade
Kingspan Kooltherm® K15 Rainscreen Insulation
Kingspan Kingpin®
Kingspan SFS stud
Dri-Design Aluminium Rainscreen (BENCHMARK by Kingspan)
74 Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Cladding Treatments
Timber Rainscreen
use of the Kingspan Kingpin system as detailed.
Metal Rainscreen Stone Panels
The setting out and direction of span of the stone is critical to
engineers.
Kingspan Kooltherm® K15 Rainscreen Insulation
Kingspan Kingpin®
Kingspan SFS stud
75Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Cladding Treatments
Kingspan QuadCore Karrier Panel (BENCHMARK by Kingspan)
connected to the outer face.
The SFS-QuadCore Karrier System can
2.
Kingspan QuadCore Karrier Panel System
Kingspan SFS stud
Kingframe SFS Design Guide
Steel Building Solutions
General Speci cation Notes
ProductsCold rolled components are manufactured from pre-hot dipped
2
of practice.
Procurement
produce a cutting list and order Kingspan materials. This should
Erection of Components
in right angled connections. It is important that all ends are
completion of erection.
of the structure during construction.
Products:
Supplier:
77Kingframe SFS Design Guide
Steel Building Solutions
COSHH Technical Data
Use
Typical Composition
Steel
2.
Handling of Product
contractor as part of the installation training course.
sections from the unloading point to any intermediate storage
Storage of Product
length of the pack.
Disposal of Product
Products:
Supplier:
78 Kingframe SFS Design Guide
Steel Building Solutions
COSHH Technical Data
Precautions
tools of any sort.
First Aid
medical attention. It is also recommended that if a cut is
Lacerations of the skin can occur from sharp corners and edges
Steel sections at atmospheric temperatures do not emit any fumes or gasses.
Please contact the Kingspan Technical Team.
person carrying out the task of using the product is experienced and
product and application.
that person.
recommendations of this safety sheet are not adhered to.
Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Kingspan Steel Building
Head O ce Kingspan Steel Building Solutions
Malton
Technical, Estimating & Site Support Kingspan Steel Building Solutions
Birmingham
Customer Order Services Kingspan Steel Building Solutions Pleck Road
Kingframe SFS Design Guide
Steel Building Solutions
Framing principles are generally the same as for external SFS
design stage.
Contact Kingspan for further design guidance or to make use of
foundations.
81Kingframe SFS Design Guide
Steel Building Solutions
82 Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - KingPIN® Rainscreen Support System
The KingPin®
Thermal Performance
approximately eight times less than aluminium alloys of typical
the air tightness performance of the system.KingPin®
thermal loss.
– Features
– Function
façade thickness.
– Bene ts
KingPin®
83Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - KingPIN® Rainscreen Support System
Structural Performance Detailing Simplicity
Brackets for
applications
84 Kingframe SFS Design Guide
Steel Building Solutions
Kingspan QuadCore Karrier Panel System
Kingspan SFS stud
Technical Manual - Kingspan QuadCore Karrier Panel System
Kingspan QuadCore Karrier Panel (BENCHMARK by Kingspan)
the outer face.
The SFS QuadCore Karrier System can
2.
85Kingframe SFS Design Guide
Steel Building Solutions
Technical Manual - Unitised SFS Façade System
2 recessed system and 175m2
construction method.
– All panels are manufactured utilising a controlled management
to eliminate condensation risk and maximise insulation
contractor to ensure all
and condensation principles
Unitised SFS Façades are
industry standard types of
thermal performance.
Structure
methods up to any height.
Foundations
construction and incorporate
types of foundation design for
86 Kingframe SFS Design Guide
Steel Building Solutions
Installer Information
Features– CDM Regulations
– Material Ordering
– Tools & Fixings
Installer Guide to the Kingframe SFS System
87Kingframe SFS Design Guide
Steel Building Solutions
Installer Information
– Health & Safety
– Oversail SFS
– Cleats, Brackets & Ancillaries
– Interfacing Elements
– Quality Control
– COSHH & Technical Data Sheets
88 Kingframe SFS Design Guide
Steel Building Solutions
Installer Information
CDM Regulations– Obligations of the Installer
– Site Visits
– Remedial Works Arising from Site Report
– Competency of the Installer and Training
Site Speci c Design Information– Drawing Submissions
– Reading Design Drawings
Material Ordering– Price Lists & Order Requirements
– Scope of Supply
– Building Regulation Requirements
– Pre-Order Checks
Tools & Fixings– Hand Tools & Accessories
– Measuring & Setting Out Tools
– Cutting Tools
– Fixing Tools
Health & Safety– Edge Protection
– PPE
– Manual Handling
– Method Statements
– Risk Assessments
– Access Equipment
Material Inspection & O oading– Method of Delivery
– Safe Handling
– Safe Storage
– Damaged Material
In ll SFS– Site Preparation
– Basic Installation Principles
– Detailed Installation
Oversail SFS– Site Preparation
– Basic Installation Principles
Cleats, Brackets & Ancillaries– Jamb Cleats
– Lintel & Cill Cleats
– Flat Straps
– ‘Z’ Bars
– Face Fix Angles
Interfacing Elements– External Sheathing Board
– Masonry
– Render
– Rainscreen
Quality Control
– Remedial Works
– Kingspan Site Support
COSHH & Technical Data Sheets
– COSHH Data Sheet
– Cutting Tools / Drilling tools
The SFS Installer manual available from Kingspan covers the following areas:
89Kingframe SFS Design Guide
Steel Building Solutions
Installer Information
90 Kingframe SFS Design Guide
Steel Building Solutions
Installer Information - SFS Installer Training
Content includes: Health & Safety with SFS
Product Overview
KingFrame Oversail SFS
KingFrame Loadbearing SFS
Workmanship
Tolerances
Follow-on Trades
Photo Test
IntroductionThe training is designed to give the attendee a deep
and installation principles helping to increase productivity, reduce costs and minimise SFS related health and safety issues.
completion and be listed as a Kingspan recognised installer.
The SFS Installer Training Session is intended for Installers, Site Managers and Main Contractors to establish a good understanding of the system and to ensure installation compliance with Kingspan Engineering
91Kingframe SFS Design Guide
Steel Building Solutions
Installer Information - SFS Installer Advantages
A comprehensive Installation Guide is available to download at: www.kingspanpanels.co.uk/sbs
Building Physics:– Warm frame construction from lightweight cold rolled steel
sections can be designed to easily achieve high levels of
excellent thermal and acoustic performance ahead of Building Control requirements.
Speed of build:– Risk to the client is reduced through predictability and
investment.
– Rapid dry envelope – reduced time to achieve a watertight structure over a traditional build allows access for follow on trades earlier and further reduces the build programme.
Sustainability:
therefore reduces material usage over traditional materials.
(2007).
– Steel sections are 100% recyclable. This is increasingly important as the lifetime environmental
impact of the buildings is increasingly scrutinised to meet tighter Government legislation.
– Light gauge steel reduces the overall weight of walling relative to blockwork minimising the requirements for foundations.
Quality & Cost:– Lightweight cold rolled steel sections are precision engineered products manufactured to tight tolerances ensuring exact performance resulting in less time spent on- site correcting errors and solving problems.
shrinkage.
– Operational cost – lifetime savings thanks to highly energy
– Tight tolerances – high dimensional accuracy of construction gives long term reliability.
– SFS can incorporate a vast array of architectural treatments and features and allows large spans and large structural openings without the need for windposts.
– Just-in-time – delivery of components as needed allows construction on tight sites, lowering costs in site management and storage facilities.
Design:– If requested, schemes can be fully detailed prior to rolling,
exposing potential clashes at the design stage there by resolving them before they become costly problems on-site.
– If required, our in-house design team can be involved at all
solution.
CE Marked:– Kingframe SFS has been assessed and is CE Marked in
line with the Kingspan Declaration of Performance No: CPR-2013.SFS.001. Covered by Harmonised Standard BS EN 1090-1:2009+A1:2011
traditional techniques.
92 Kingframe SFS Design Guide
Steel Building Solutions
Features®
Provide in nite functionality, design and speci cation solutions
93Kingframe SFS Design Guide
Steel Building Solutions
94 Kingframe SFS Design Guide
Steel Building Solutions
Within the highly competitive eld of construction, the adaptation of new technology enhancements is considered an essential requirement. BIM Technology is being rolled out and Kingspan are at the forefront of this development.
Why We Need BIM (“Building Information Modelling”)
BIM in Kingspan’s History
Government Vision and Kingspan’s Mission
Kingframe SFS Design Guide
Steel Building Solutions
Delivering SFS in BIM
Current BIM Bene ts
Kingframe SFS Design Guide
Steel Building Solutions
97Kingframe SFS Design Guide
Steel Building Solutions
98 Kingframe SFS Design Guide
Steel Building Solutions
99Kingframe SFS Design Guide
Steel Building Solutions
Kingspan Steel Building Solutions