Hydraulic pumpsPumps are designed for easy usage at the pressures and volumes that are needed for ETP-HYLOC.All pumps are of a robust design and CE marked. Themotorpump is especially designed for use with largersizes of ETP-HYLOC, size < 150 mm, or when mounting/dismantling is to be made frequently.
All pumps are equipped with manometer and hoses
(length 3 m). A threaded connection G 1/8 is on eachhose which is suitable for direct mounting in ETP-HYLOC.Max. working pressure is 1 500 bar, controlled by a pressure release valve.
The Handpump H-11 can also be delivered with a setmax. working pressure of 700 or 1 000 bar. When ordering contact us for a configuration.
When there is a need for fast and frequent mounting, thepumps can be equipped, as accessories, with special highpressure quick connections.
A quick connection consists of one chuck (C), mounted on the pump hose, and one nipple (N), mounted in thepressure connection of ETP-HYLOC.
Quick connections
Chuck C-03
ETP Part number: 19143
Nipple N-03
ETP Part number: 19142
Quick connection type 03.
The chuck, C-03 is pressedonto the nipple, N-03.
Note: This type has bigger built-indimensions and can not be usedaxially, if the shaft pass all the waythrough, for sizes ≤ 110 mm ofETP-HYLOC.
Hand pump H11
ETP Part number: 19102• For use with ETP-HYLOC• Delivered in steel box• 2 pressure hoses + 1 return hose (3m)• Incl. 2 L SAE 80 W oil• Including assembly kit A and B.
Motor pump A-04
Part number: 19112• For use with ETP-HYLOC.• Delivered in steel box• 2 pressure hoses + 1 return hose (3m)• Incl. 2 L SAE 80 W oil• Including assembly kit A and B
Motor pump A-04
Pneumatically driven. Delivered in a practical steel box.Hand pump H-11
Delivered in a practical steel box.
ETP-HYLOC accessories ETP Transmission AB
There are the following 2 versions:
Quick connection type 02.
The chuck, C-02, isscrewed onto thenipple, N-02,with an outer ring.
Chuck C-02
ETP Part number: 19131
Nipple N-02
ETP Part number: 19121
ETP Pumpar tillbehörsblad_Layout 1 2016-05-24 13.28 Sida 1
Assembly kit A
ETP Part number: 191191• 3 pcs. hose connections, Thread G 1/4"-1/4", incl. seals
• For use with quick connections type 02 and 03
Assembly kit B
ETP Part number: 191192• 3 pcs. hose connections,Thread G 1/4"-1/8", incl. seals
• For use directly in ETP-HYLOC(without quick connections).
Hoses & connections scheme
For use with quick connections
For use directly in ETP-HYLOC
ETP Transmission ABBox 1120S-581 11 LinköpingSweden
ETP-HYLOC - Quick, Easy & Precise
High pressure steel plug G 1/8”
ETP Part number: 19200
Plastic protection plug G 1/8”
ETP Part number: O100
Spare parts - ETP-HYLOC
Hoses
K0061 & K013
Hoses with
Assembly kit A
Hoses with
Assembly kit B
Return hose
ETP Part number: K013• For ETP Handpump H-11 and Motorpump A-04
• Length 3 m.
Spare parts - Pumps
High pressure hose
ETP Part number: K0061• For ETP Handpump H-11and Motorpump A-04
• Length 3 m.
Thread G 1/4"
Thread G 1/8"
Thread G 1/4"
ETP Pumpar tillbehörsblad_Layout 1 2016-05-24 13.28 Sida 2