SUBMITTAL NUMBER: 265600-01.00 OCPS CLAY SPRINGS ES SUBMITTAL TRANSMITTAL SUBMITTAL DETAILS: REVIEWERS: SUBJECT: EXTERIOR LIGHTING DATE RECIEVED: Oct 23, 2014 DISCIPLINE: Electrical PRIMARY: TAD RIVENBARK [email protected]KEVIN KING [email protected]MATERN ENGINEERING PHN: (407) 740-5020 FAX: (407) 740-0365 MATERN ENGINEERING PHN: (407) 740-5020 FAX: (407) 740-0365 SECONDARY: PRIORITY STATUS: 2-STANDARD REVIEWER DUE DATE: 11/4/2014 SPECIFICATION REF: 26 56 00 DWG REF. NONE DWG TITLE: NO OF ITEMS: ITEM DESCRIPTI REVIEW STATUS: COMMENTS: CONTRACTOR/CM: : WILLIAMS COMPANY : BRAD KUBIN 2301 SILVER STAR RD. ORLANDO, FL, 32809 (407) 295-2530 FAX:(407) 297-0459 PLEASE SEE A/E COMMENTS **"ALL EXTERIOR FIXTURES TO BE CLEAR ANODIZED OR NATURAL ALUMINUM COLOR/FINISH" FURNISH AS MARKED RETURNED ITEMS: DATE RETURNED TO CM: 11/5/2014 BUILDING REFERENCE: 1 Product Literature(s) PAGE 1 OF 1 RHODES + BRITO ARCHITECTS INC. : 605 E. ROBINSON STREET, SUITE 750 : ORLANDO, FL. : 32801 : 407.648.7288 : FAX.648.7289 cc: OWNER : CALVIN WOOLFOLK 6501 MAGIC WAY, BLDG. 200 ORLANDO, FL, 32809 (407) 317-3700 FAX:(407) 317-3768 R+B FILE: : 13017-0001.X6
28
Embed
OCPS CLAY SPRINGS ES SUBMITTAL TRANSMITTAL · DRAWING AND/OR PRODUCT DATA SUBMITTAL. N ... DPRM Red primer ... consequently personal injury or property damage. Sheet #: ...
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
THE FOLLOWING COMMENTS SHALL BE CONSIDERED AN INTEGRAL PART OF THE SHOP DRAWING AND/OR PRODUCT DATA SUBMITTAL.
26 56 00: No Exceptions Noted, Make Corrections Noted.
Note: Ballast quantities and voltages not reviewed. Provide ballasts as necessary to maintain switching arrangements indicated on drawings. H1: Make Corrections Noted. Ballast manufacturer shall be Magnetek, or approved substitution.
Ballast shall be multi-voltage as shown on the Fixture Schedule. Ballasts installed outdoors shall be zero degree ballasts.
Sylvania, G.E., or Phillips shall manufacture lamps. Lamps shall be 4100K.
SLA: Make Corrections Noted. Sylvania, G.E., or Phillips shall manufacture lamps.
Fixture color selection shall be by the Architect. Provide lightning arrester for each pole light. Provide fuse for each pole light.
SLB: Make Corrections Noted. Sylvania, G.E., or Phillips shall manufacture lamps.
Fixture color selection shall be by the Architect. Provide lightning arrester for each pole light. Provide fuse for each pole light.
ACTION CODE KEY
A No exceptions taken. B Make corrections noted. C Revise and Resubmit. D Submit Specified Item. E Rejected. N Review not required.
Shop Drawing Comments - Electrical
Page 2 of 2
Corporate Office: 130 Candace Drive, Maitland, Florida 32751-3331 Phone: 407.740.5020 Orlando | Fort Myers | Jacksonville | Tampa | www.matern.net
SLC: Make Corrections Noted. Fixture color selection shall be by the Architect.
Provide lightning arrester for each pole light. Provide fuse for each pole light. Fixture shall have Type II distribution as shown on the Fixture Schedule.
WMD: Make Corrections Noted. Fixture color selection shall be by the Architect.
Provide fuse for each fixture. Fixture shall have Type II distribution as shown on the Fixture Schedule.
WP1A: Make Corrections Noted. Sylvania, G.E., or Phillips shall manufacture lamps.
Fixture color selection shall be by the Architect. Lightning Arrestor: No Exceptions Noted.
THIS SUBMITTAL IS ISSUED TO YOU FOR YOUR REVIEW. PLEASE RESPOND AND RETURN...WITH THIS COMPLETED SAM TRANSMITTAL...TO MICHELE BUDAY-URDANETA NO LATER THAN: 11/4/2014. PLEASE COMPLETE REVIEW STATUS AT RIGHT
SUBMITTAL CONTENTS:
NO OF ITEMS: ITEM DESCRIPTION
(please print)THIS SUBMITTAL WAS REVIEWED BY :
RE-SUBMIT WITH ITEMS
NOT REVIEWED
REJECTED
REVISE AND RESUBMIT
FURNISHED AS MARKED
REVIEWED
COMMENTS:
1 PRODUCT LITERATURE(S)
cc:
OWNER : CALVIN WOOLFOLK
6501 MAGIC WAY, BLDG. 200
ORLANDO, FL, 32809
R+B FILE: : 13017-0001.X6CONTR/CM: : WILLIAMS COMPANY
: BRAD KUBIN
2301 SILVER STAR RD.
Submittal Cover.doc
ABC ACCREDITED QUALITY CONTRACTOR EC-0000981
430 West Drive Altamonte Springs, Florida 32714 EC-0000981 Phone: (407) 788-3500
CLAY SPRINGS ELEMENTARY SCHOOL
TCE JOB #100707
OWNER: Orange County Public Schools Design & Construction Bldg. 200, 6501 Magic Way Orlando, FL 32809
GENERAL CONTRACTOR: Williams Company 2301 Silver Star Road Orlando, FL 32804
ARCHITECT: Rhodes + Brito Architects 605 E. Robinson Street, Suite 750 Orlando, FL 32801
ENGINEER: Matern Professional Engineering, Inc. 130 Candace Drive Maitland, FL 32751
SUBCONTRACTOR: Tri-City Electrical Contractors, Inc. 430 West Drive Altamonte Springs, FL 32714
Nulite Lighting 10770 East 51st Avenue, Denver, CO 80239 Phone 303-287-9646 Fax 303-287-0316 www.nulite-lighting.com
Description:
TM
Project Name:
Type:
Catalog #:
Date:
Construction: Housing is die formed of 20 gauge cold rolled steel. Housing is finished with baked white enamel paint. Clear polycarbonate lens features pyramidal prism bottom and vertical ribbed perimeter provides maximum light control and efficiency. Lens is secured with tamper resistant spanner head screws.
Reflector / Ballast: Ballast cover/pan is formed and finished with high reflectance white paint. Standard electronic, Class P, ballast. Universal (UNV) voltage ballast is from 120 to 277V.
Lamping: 1, 2 or 3 lamp cross-section T5, T5HO or T8. Luminaire can be ordered with lamps, consult factory.
Mounting: Surface.
Labels: UL / cUL listed for Damp location. Wet location is optional.
The Nulite SVR series is a vandal resistant low profile surface mounted lensed luminaire. The polycarbonate prismatic / ribbed lens will hold up to high traffic and vandal applications.
Specifications:
Ordering InformationSample: SVR-232T8-UNV-ISN-WL
Series Wattage Voltage Options
14T524T5HO17T828T554T5HO32T8
UNV
120
277
3473
EM
4Emergency Battery Pack
Lamp
11
2
32
Ballast
Notes: 1. 1-Lamp cross-section is only available in nominal 4’ length.2. 3-Lamp cross-section is only available for 32W T8.3. Consult factory.4. Specific voltage must be ordered for this option. Consult factory for nominal 2’ units.
9-1/2”
3-1/4”
Length Wattage
27” 14T5, 24T5HO, 17T8
51” 28T5, 54T5HO, 32T8
2010 Rev. B
SVR
4-3/4”
4-7/8”
(1-light, nom. 4’ only)
(2 or 3-light, nom. 2’ or 4’)
WL Wet Location
7/8” KO
IS (Standard)Instant Start
PSProgram Start
HEISHigh Efficiency Instant Start
HEPSHigh Efficiency Program Start
N Normal (Standard)
L Low
H High
DIM3 Dimming
SD3 Step Dimming
T8 Options
PS (Standard)Program Start
HEPS3
High Efficiency Program Start
T5/T5HO
All Lamp Dimming Options
Ballast Factor
Ballast Factor
N Normal
Specifications and dimensions are subject to change without notification. Specification sheets on our website supersede all other versions. Nulite reserves the right to bulk package any order.
FEATURES & SPECIFICATIONSINTENDED USEDrill mount tenon adaptor converts pole-top tenons to accommodate arm-mounted luminaires.CONSTRUCTIONAdaptor is formed from aluminum 6061 alloy schedule 40 pipe, heat-treated to a T6 temper after welding. Welding follows industry-standard best practices.Hardware: Stainless steel set screws included.Top cap: Plastic top cap included.Finish: Must specify finish.INSTALLATIONSlide slipfitter over pole tenon and tighten down set screws. Proceed with arm installation.
NOTES:1 Txx is drill template #5. ASTxx is drill template #8. Special drillings
available; consult factory. 2 Additional custom sizes are available; consult factory.3 Finish must be specified. Additional colors available; see www.
lithonia.com/archcolors or the Architectural Colors brochure (Form No. 794.3).
Drill-Mount Tenon Slipfitter
TXX/ASTXXSTANDARD (TXX) OR AERIS™/OMERO™ (ASTXX)
DRILL PATTERN
Outdoor
(See next page for dimensions and drawings.)
Sheet #: Pole-TXX-ASTXX
Lead times will vary depending on options selected. Consult with your sales representative.Example: T20-280 DDB
ORDERING INFORMATION
Drilling orientation
190 1 at 90° 280 2 at 180° 290 2 at 90° 320 3 at 120° 390 3 at 90° 490 4 at 90°
Standard colors DDB Dark bronze DWH White DBL Black DMB Medium bronze BA Brushed aluminumClassic colors DSS Sandstone DGC Charcoal gray DTG Tennis green DBR Bright red DSB Steel bluePrimer finish DPRM Red primerClass 1 architectural anodized ABL Black ADB Dark bronze ANA NaturalArchitectural colors3
Txx/ASTxx Drill-Mount Tenon Slipfitter; Metal, Fiberglass or Concrete Poles
IMPORTANT: • These specifications are intended for general purposes only. Lithonia Light-
ing reserves the right to change material or design, without prior notice, in a continuing effort to upgrade its products.
CAUTION: • The arms described herein are designed for applications in areas of normal
winds. Consult the factory prior to the design of systems to be mounted on structures such as bridges or buildings, or areas known to have abnormal winds such as airports or coastal areas. Failure to consider these factors in the system design could result in the failure of the pole or mast arm, and consequently personal injury or property damage.
1 Photometric data for other distributions can be accessed at www.lithonia.com.
2 Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause
differences between laboratory data and actual field measurements. Dimensions and specifications on this sheet are
based on the most current available data and are subject to change without notice.
3 For electrical characteristics, consult outdoor technical data specification sheets on www.lithonia.com.
Existing Mounting Height New Mounting Height
2
= Correction Factor
KAD 400M R2 Test no. 1193083101P KAD 400M R3 Test no. 1192040902P
KAD 400M R4HS Test no. 1192061101PKAD 400M R4 Test no. 1191110101P
DIS
TAN
CE
IN U
NIT
S O
F M
OU
NTI
NG
HE
IGH
T
ISOILLUMINANCE PLOT (Footcandle)
400W pulse start metal halide lamp, rated 38000 lumens. Footcandle values based on 20'mounting height.Classification: Type II, Short, Full Cutoff
-3
-2
-1
0
1
2
3
40 1 2 3 4 5 6
52.51.510.5
0.25
DIS
TAN
CE
IN U
NIT
S O
F M
OU
NTI
NG
HE
IGH
T
ISOILLUMINANCE PLOT (Footcandle)
400W pulse start metal halide lamp, rated 38,000 lumens. Footcandle values based on 20'mounting height.Classification: Type II, Short, Full Cutoff
-3
-2
-1
0
1
2
3
40 1 2 3 4 5 6
52.51.5
10.5
0.25
DIS
TAN
CE
IN U
NIT
S O
F M
OU
NTI
NG
HE
IGH
T
ISOILLUMINANCE PLOT (Footcandle)
400W pulse start metal halide lamp, rated 38,000 lumens. Footcandle values based on 20'mounting height.Classification: Unclassified (Type III, Very Short), Full Cutoff
-3
-2
-1
0
1
2
3
40 1 2 3 4 5 6
52.51.510.5
0.25
DIS
TAN
CE
IN U
NIT
S O
F M
OU
NTI
NG
HE
IGH
TISOILLUMINANCE PLOT (Footcandle)
400W pulse start metal halide lamp, rated 38,000 lumens. Footcandle values based on 20'mounting height.Classification: Unclassified (Type III, Very Short), Full
-3
-2
-1
0
1
2
3
40 1 2 3 4 5 6
52.51.510.5
0.25
KAD 400M R5S Test no. 1194040801P
DIS
TAN
CE
IN U
NIT
S O
F M
OU
NTI
NG
HE
IGH
T
ISOILLUMINANCE PLOT (Footcandle)
400W pulse start metal halide lamp, rated 38000 lumens. Footcandle values based on 20'mounting height.Classification: Unclassified (Type NC, Very Short), Full Cutoff
FEATURES & SPECIFICATIONSINTENDED USEDrill mount tenon adaptor converts pole-top tenons to accommodate arm-mounted luminaires.CONSTRUCTIONAdaptor is formed from aluminum 6061 alloy schedule 40 pipe, heat-treated to a T6 temper after welding. Welding follows industry-standard best practices.Hardware: Stainless steel set screws included.Top cap: Plastic top cap included.Finish: Must specify finish.INSTALLATIONSlide slipfitter over pole tenon and tighten down set screws. Proceed with arm installation.
NOTES:1 Txx is drill template #5. ASTxx is drill template #8. Special drillings
available; consult factory. 2 Additional custom sizes are available; consult factory.3 Finish must be specified. Additional colors available; see www.
lithonia.com/archcolors or the Architectural Colors brochure (Form No. 794.3).
Drill-Mount Tenon Slipfitter
TXX/ASTXXSTANDARD (TXX) OR AERIS™/OMERO™ (ASTXX)
DRILL PATTERN
Outdoor
(See next page for dimensions and drawings.)
Sheet #: Pole-TXX-ASTXX
Lead times will vary depending on options selected. Consult with your sales representative.Example: T20-280 DDB
ORDERING INFORMATION
Drilling orientation
190 1 at 90° 280 2 at 180° 290 2 at 90° 320 3 at 120° 390 3 at 90° 490 4 at 90°
Standard colors DDB Dark bronze DWH White DBL Black DMB Medium bronze BA Brushed aluminumClassic colors DSS Sandstone DGC Charcoal gray DTG Tennis green DBR Bright red DSB Steel bluePrimer finish DPRM Red primerClass 1 architectural anodized ABL Black ADB Dark bronze ANA NaturalArchitectural colors3
Txx/ASTxx Drill-Mount Tenon Slipfitter; Metal, Fiberglass or Concrete Poles
IMPORTANT: • These specifications are intended for general purposes only. Lithonia Light-
ing reserves the right to change material or design, without prior notice, in a continuing effort to upgrade its products.
CAUTION: • The arms described herein are designed for applications in areas of normal
winds. Consult the factory prior to the design of systems to be mounted on structures such as bridges or buildings, or areas known to have abnormal winds such as airports or coastal areas. Failure to consider these factors in the system design could result in the failure of the pole or mast arm, and consequently personal injury or property damage.
1 Photometric data for other distributions can be accessed at www.lithonia.com.
2 Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause
differences between laboratory data and actual field measurements. Dimensions and specifications on this sheet are
based on the most current available data and are subject to change without notice.
3 For electrical characteristics, consult outdoor technical data specification sheets on www.lithonia.com.
Existing Mounting Height New Mounting Height
2
= Correction Factor
KAD 400M R2 Test no. 1193083101P KAD 400M R3 Test no. 1192040902P
KAD 400M R4HS Test no. 1192061101PKAD 400M R4 Test no. 1191110101P
DIS
TAN
CE
IN U
NIT
S O
F M
OU
NTI
NG
HE
IGH
T
ISOILLUMINANCE PLOT (Footcandle)
400W pulse start metal halide lamp, rated 38000 lumens. Footcandle values based on 20'mounting height.Classification: Type II, Short, Full Cutoff
-3
-2
-1
0
1
2
3
40 1 2 3 4 5 6
52.51.510.5
0.25
DIS
TAN
CE
IN U
NIT
S O
F M
OU
NTI
NG
HE
IGH
T
ISOILLUMINANCE PLOT (Footcandle)
400W pulse start metal halide lamp, rated 38,000 lumens. Footcandle values based on 20'mounting height.Classification: Type II, Short, Full Cutoff
-3
-2
-1
0
1
2
3
40 1 2 3 4 5 6
52.51.5
10.5
0.25
DIS
TAN
CE
IN U
NIT
S O
F M
OU
NTI
NG
HE
IGH
T
ISOILLUMINANCE PLOT (Footcandle)
400W pulse start metal halide lamp, rated 38,000 lumens. Footcandle values based on 20'mounting height.Classification: Unclassified (Type III, Very Short), Full Cutoff
-3
-2
-1
0
1
2
3
40 1 2 3 4 5 6
52.51.510.5
0.25
DIS
TAN
CE
IN U
NIT
S O
F M
OU
NTI
NG
HE
IGH
TISOILLUMINANCE PLOT (Footcandle)
400W pulse start metal halide lamp, rated 38,000 lumens. Footcandle values based on 20'mounting height.Classification: Unclassified (Type III, Very Short), Full
-3
-2
-1
0
1
2
3
40 1 2 3 4 5 6
52.51.510.5
0.25
KAD 400M R5S Test no. 1194040801P
DIS
TAN
CE
IN U
NIT
S O
F M
OU
NTI
NG
HE
IGH
T
ISOILLUMINANCE PLOT (Footcandle)
400W pulse start metal halide lamp, rated 38000 lumens. Footcandle values based on 20'mounting height.Classification: Unclassified (Type NC, Very Short), Full Cutoff
Catalog Number:KAD LED 1 63B530/50K SR3 MVOLTRPD09 DDBXDNotes: Verify finish. Schedule states CBA
Type:
SLCLAND14-51183
Specifications
EPA: 1.2 ft2
(0.11 m2)
Length: 17-1/2”(44.5 cm)
Width: 17-1/2”(44.5 cm)
Height: 7-1/8”(18.1 cm)
Weight (max):
36 lbs(16.4 kg)
NOTES
1 Configured with 4000K (/40K) provides the shortest lead times. Consult factory for 3000K (/30K) and 5000K (/50K) lead times.
2 MVOLT driver operates on any line voltage from 120-277V (50/60 Hz). Specify 120, 208, 240 or 277 options only when ordering with fusing (SF, DF options).
3 Single fuse (SF) requires 120, 277 or 347 voltage option. Double fuse (DF) requires 208, 240 or 480 voltage option.
4 Not available with 347 or 480V.5 Also available as a separate accessory; see
Accessories information at left.6 Requires luminaire to be specified with PER
option. Ordered and shipped as a separate line item.
DSS124N 1.5 TJJE U Photocell - SSL twist-lock (120-277V) 6
REN480 NM1 J1 ROAM® node (480V) 6
SC U Shorting cap 6
KMA DDBXD U Mast arm adapter (specify finish)
KADWG U Wire guard accessory
KADVG U Vandal guard accessory
AccessoriesOrdered and shipped separately.
KAD LEDLED Area Luminaire
Ordering Information EXAMPLE: KAD LED 1 63B350/40K SR5 MVOLT SPD04 DDBXD
Catalog Number
Notes
Type
www.lithonia.com
Hit the Tab key or mouse over the page to see all interactive elements.
Introduction®
The KAD LED combines the latest in LED
®
For more control options, visit DTL and ROAM online.
Drilling
Tenon O.D. Single Unit 2 at 180° 2 at 90° † 3 at 120° 3 at 90° † 4 at 90° †
Catalog Number:KAD LED 1 63B530/50K SR3 MVOLTRPD09 DDBXDNotes: Verify finish. Schedule states CBA
Type:
SLCLAND14-51183
Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown, within the tolerances allowed by Lighting Facts. Actual performance may differ as a result of end-user environment and application. Contact factory for performance data on any configurations not shown here.
To see complete photometric reports or download .ies files for this product, visit Lithonia Lighting’s KAD LED homepage.
Current (A)
Light Engines
Drive Current (mA)
System Watts
120 208 240 277 347 480
1 (49) 350 59W 0.55 0.32 0.27 0.24 0.19 0.14
1 (63)350 74W 0.69 0.40 0.34 0.30 0.24 0.17
530 109W 1.01 0.58 0.50 0.44 0.35 0.25
Electrical Load
FEATURES & SPECIFICATIONS
INTENDED USE
.
CONSTRUCTION
FINISH
OPTICS
ELECTRICAL
INSTALLATION
LISTINGS °
minimum ambient.
WARRANTY
.
Note:
Performance Data
Photometric Diagrams
www.lithonia.com
Lumen OutputUse these factors to determine relative lumen output for average ambient temperatures from 0-40°C (32-104°F).
Lumen Ambient Temperature (LAT) Multipliers
Ambient Lumen Multiplier
0°C 32°F 1.02
10°C 50°F 1.01
20°C 68°F 1.00
25°C 77°F 1.00
30°C 86°F 1.00
40°C 104°F 0.99
Projected LED Lumen MaintenanceData references the extrapolated performance projections for the KAD LED 1 63B530 platform in a 40°C ambient, based on 10,000 hours of LED testing (tested per IESNA LM-80-08 and projected per IESNA TM-21-11).
To calculate LLF, use the lumen maintenance factor that corresponds to the desired number of operating hours below. For other lumen maintenance values, contact factory.
FEATURES & SPECIFICATIONSINTENDED USEDrill mount tenon adaptor converts pole-top tenons to accommodate arm-mounted luminaires.CONSTRUCTIONAdaptor is formed from aluminum 6061 alloy schedule 40 pipe, heat-treated to a T6 temper after welding. Welding follows industry-standard best practices.Hardware: Stainless steel set screws included.Top cap: Plastic top cap included.Finish: Must specify finish.INSTALLATIONSlide slipfitter over pole tenon and tighten down set screws. Proceed with arm installation.
NOTES:1 Txx is drill template #5. ASTxx is drill template #8. Special drillings
available; consult factory. 2 Additional custom sizes are available; consult factory.3 Finish must be specified. Additional colors available; see www.
lithonia.com/archcolors or the Architectural Colors brochure (Form No. 794.3).
Drill-Mount Tenon Slipfitter
TXX/ASTXXSTANDARD (TXX) OR AERIS™/OMERO™ (ASTXX)
DRILL PATTERN
Outdoor
(See next page for dimensions and drawings.)
Sheet #: Pole-TXX-ASTXX
Lead times will vary depending on options selected. Consult with your sales representative.Example: T20-280 DDB
ORDERING INFORMATION
Drilling orientation
190 1 at 90° 280 2 at 180° 290 2 at 90° 320 3 at 120° 390 3 at 90° 490 4 at 90°
Standard colors DDB Dark bronze DWH White DBL Black DMB Medium bronze BA Brushed aluminumClassic colors DSS Sandstone DGC Charcoal gray DTG Tennis green DBR Bright red DSB Steel bluePrimer finish DPRM Red primerClass 1 architectural anodized ABL Black ADB Dark bronze ANA NaturalArchitectural colors3
Txx/ASTxx Drill-Mount Tenon Slipfitter; Metal, Fiberglass or Concrete Poles
IMPORTANT: • These specifications are intended for general purposes only. Lithonia Light-
ing reserves the right to change material or design, without prior notice, in a continuing effort to upgrade its products.
CAUTION: • The arms described herein are designed for applications in areas of normal
winds. Consult the factory prior to the design of systems to be mounted on structures such as bridges or buildings, or areas known to have abnormal winds such as airports or coastal areas. Failure to consider these factors in the system design could result in the failure of the pole or mast arm, and consequently personal injury or property damage.
Ordering Information EXAMPLE: DSXW1 LED 20C 1000 40K T3M MVOLT DDBTXD
NOTES
1 MVOLT driver operates on any line voltage from 120-277V (50/60 Hz). Specify 120, 208, 240 or 277 options only when ordering with fusing (SF, DF options), or photocontrol (PE option).
2 Back box ships installed on fixture. Cannot be field installed. Cannot be ordered as an accessory.3 Photocontrol (PE) requires 120, 208, 240 or 277 voltage option. 4 Specifies the Sensor Switch SBR-10-ODP control; see Motion Sensor Guide for details. Dimming driver
standard.5 Specifies the Sensor Switch SBR-6-ODP control; see Motion Sensor Guide for details. Dimming driver
standard.6 Not available with 20 LED/1000 mA configuration (DSXW1 LED 20C 1000).7 Not compatible with conduit entry applications. Not available with BBW mounting option. 8 Single fuse (SF) requires 120 or 277 voltage option. Double fuse (DF) requires 208 or 240 voltage option. 9 Also available as a separate accessory; see Accessories information.
Catalog Number
Notes
Type
AccessoriesOrdered and shipped separately.
DSXWHS U House-side shield (one per light engine)
DSXWBSW U Bird-deterrent spikes
DSXW1WG U Wire guard accessory
DSXW1VG U Vandal guard accessory
Hit the Tab key or mouse over the page to see all interactive elements.
Catalog Number:DSXW1 LED 10C 1000 50K T2MMVOLTNotes: Verify finish. Schedule states CBA
Type:
WMDLAND14-51183
LEDs
Drive
Current
(mA)
Performance
Package
System
Watts
Dist.
Type
40K
(4000K, 70 CRI)
50K
(5000K, 65 CRI)
Lumens B U G LPW Lumens B U G LPW
10C
(10 LEDs)
530 10C 530 --K 20 W
T2S 1724 1 0 1 86 1807 1 0 1 90
T2M 1729 1 0 1 86 1812 1 0 1 91
T3S 1709 1 0 1 85 1792 1 0 1 90
T3M 1753 1 0 1 88 1838 1 0 1 92
T4M 1753 1 0 1 88 1837 1 0 1 92
TFTM 1766 1 0 1 88 1851 1 0 1 93
700 10C 700 --K 27 W
T2S 2234 1 0 1 83 2341 1 0 1 87
T2M 2241 1 0 1 83 2349 1 0 1 87
T3S 2216 1 0 1 82 2322 1 0 1 86
T3M 2272 1 0 1 84 2381 1 0 1 88
T4M 2272 1 0 1 84 2381 1 0 1 88
TFTM 2289 1 0 1 85 2399 1 0 1 89
1000 10C 1000 --K 40 W
T2S 2992 1 0 1 75 3136 1 0 1 78
T2M 3001 1 0 1 75 3146 1 0 1 79
T3S 2967 1 0 1 74 3110 1 0 1 78
T3M 3043 1 0 1 76 3189 1 0 1 80
T4M 3043 1 0 1 76 3189 1 0 1 80
TFTM 3066 1 0 1 77 3213 1 0 1 80
20C
(20 LEDs)
530 20C 530 --K 36 W
T2S 3545 1 0 1 98 3715 1 0 1 103
T2M 3556 1 0 1 99 3727 1 0 1 104
T3S 3515 1 0 1 98 3685 1 0 1 102
T3M 3606 1 0 2 100 3779 1 0 2 105
T4M 3605 1 0 1 100 3779 1 0 1 105
TFTM 3632 1 0 1 101 3807 1 0 1 106
700 20C 700 --K 47 W
T2S 4357 1 0 1 93 4566 1 0 1 97
T2M 4370 1 0 1 93 4580 1 0 1 97
T3S 4320 1 0 1 92 4528 1 0 1 96
T3M 4431 1 0 2 94 4644 1 0 2 99
T4M 4430 1 0 1 94 4644 1 0 2 99
TFTM 4464 1 0 1 95 4678 1 0 1 100
1000 20C 1000 --K 75 W
T2S 5745 2 0 2 77 6020 2 0 2 80
T2M 5763 1 0 2 77 6039 2 0 2 81
T3S 5697 1 0 1 76 5970 1 0 2 80
T3M 5843 1 0 2 78 6123 2 0 2 82
T4M 5843 1 0 2 78 6123 1 0 2 82
TFTM 5887 1 0 2 78 6169 1 0 2 82
Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown, within the tolerances allowed by Lighting Facts. Actual performance may differ as a result of end-user environment and application. Contact factory for performance data on any configurations not shown here.
Performance Data
Lumen Output
Electrical Load
Use these factors to determine relative lumen output for average ambient temperatures from 0-40°C (32-104°F).
Lumen Ambient Temperature (LAT) Multipliers
Ambient Lumen Multiplier
0°C 32°F 1.02
10°C 50°F 1.01
20°C 68°F 1.00
25°C 77°F 1.00
30°C 86°F 1.00
40°C 104°F 0.98
Projected LED Lumen MaintenanceData references the extrapolated performance projections for the DSXW1 LED 20C 1000 platform in a 25°C ambient, based on 10,000 hours of LED testing (tested per IESNA LM-80-08 and projected per IESNA TM-21-11).
To calculate LLF, use the lumen maintenance factor that corresponds to the desired number of operating hours below. For other lumen maintenance values, contact factory.
Operating Hours 0 25,000 50,000 100,000
Lumen Maintenance Factor
1.0 0.95 0.93 0.88
FEATURES & SPECIFICATIONS
INTENDED USE
CONSTRUCTION
FINISH
OPTICS
ELECTRICAL
°
INSTALLATION
LISTINGS °
WARRANTY
Note:
To see complete photometric reports or download .ies files for this product, visit Lithonia Lighting’s D-Series Wall Size 1 homepage. Photometric Diagrams
Series Wattage Voltage Ballast Options Finish15 Lamp17
TWH Low pressure sodium1
35L
High pressure sodium1
70S
100S
150S2
200S
250S
400S
Metal halide
70M1, 3
100M1
150M
175M4
200M5
250M6
320M5
350M4, 5
400M6, 7
Ceramic metal halide
70MHC1, 3
100MHC1
150MHC
120
2088
2408
277
347
4808
TB9
2305HZ10
(blank) Magnetic ballast
CWI Constant wattage isolated
SCWA Super CWA pulse start ballast
Note: For shipments to U.S.
territories, SCWA must be
specified to comply with EISA.
Shipped installed in fixture
SF Single fuse (120, 277, 347V)
DF Double fuse (208, 240, 480V)
EC Emergency circuit11
QRS Quartz restrike11
QRSTD Quartz restrike system with time delay10, 11
PE Photoelectric cell - button type3
PER NEMA twist-lock receptacle12
FS Full shield
TP Tamper proof screws
CSA Listed and labeled to comply with Canadian Standards
NOM NOM Certified10
INTL Available for MH probe start shipping outside the U.S.
REGC1 California Title 20 effective 1/1/2010
Shipped separately13
PE1 NEMA twist-lock PE (120V/208V/240V)
PE3 NEMA twist-lock PE (347V)
PE4 NEMA twist-lock PE (480V)
PE7 NEMA twist-lock PE (277V)
SC Shooting cap for PER option
VG Vandal guard14
WG Wire guard14
(blank) Dark bronze
DNA Natural aluminum
DBL Black
DMB Medium bronze
DWH White
CR Enhanced corrosion resistant
CRT Non-stick protective coating16
LPI Lamp included
L/LP Less lamp
For shortest lead times, configure product using standard options (shown in bold).
FEATURES & SPECIFICATIONSINTENDED USE — Outdoor storage areas, warehouse and factory perimeters and loading docks.
CONSTRUCTION — Rugged, corrosion-resistant, die-cast aluminum. Corrosion-resistant external hardware
includes slotted hex-head fasteners.
Finish: Standard finish is electrostatically-applied, oven-cured, dark bronze (DDB) corrosion-resistant polyester
powder paint.
OPTICS — Reflector is specular anodized aluminum. Refractor is prismatic borosilicate glass which is sealed and gasketed
to inhibit the entrance of outside contaminants.
ELECTRICAL — Electrical components are mounted in hinged front cover that includes primary and secondary
electrical disconnect.
Ballast: Low pressure sodium: High reactance, high power factor. High pressure sodium: 70-150W is high reactance,
high power factor. Constant wattage autotransformer for 200-400W. Metal halide: 70-150W is high reactance, high
power factor and is standard with pulse-start ignitor technology. SCWA not required. Constant wattage autotrans-
former for 175-400W. Super CWA (pulse start ballast), 88% efficient and EISA legislation compliant, is required for
metal halide 151-400W (SCWA option) for US shipments only. CSA, NOM or INTL required for probe start shipments
outside of the US. Pulse-start ballast (SCWA) required for 200W, 320W, or 350W. Ballast is 100% factory-tested.
Socket: Porcelain, horizontally oriented, single-ended bayonet base socket for 35W low pressure sodium; medium
base socket for 70-150W; and mogul base socket for 175W and above, with copper alloy, nickel-plated screw shell
and center contact. UL listed 1500W, 600V.
INSTALLATION — Back housing is separated from front housing, eliminating ballast weight and promoting easy
handling. Top 3/4" threaded wiring access. Back access through removable 3/4" knockout. Feed-thru wiring can
be achieved by using a condulet tee. Mount on any vertical surface. Not recommended in applications where
a sprayed stream of water can come in direct contact with glass lens.
LISTINGS — UL Listed (standard). CSA or NOM Certified (see Options). UL listed for 25°C ambient and suitable
for wet locations. IP65 rated (250 watt and below) or IP54 rated (400 watt) in accordance with IEC Standard 529.
Note: Specifications subject to change without notice.
Notes
1 Not available with SCWA.
2 Operates 55V lamp.
3 Not available with 480V.
4 These wattages do not comply with California Title 20 regulations.
5 Must be ordered with SCWA.
6 These wattages require the REGC1 option to be chosen for shipments into California for Title 20 compliance. 250M REGC1 in not available in 347 or 480V.
175W pulse start metal halide lamp, horizontal lamp orientation Footcandle values based on 12'mounting height, 12800 rated lumens.
-2
-1
0
1
2
3
4
50 1 2 3 4 5 6
52.5
1.51
0.5
0.25
Luminaire Efficiency: 61%
DIS
TAN
CE
IN U
NIT
S O
F M
OU
NTI
NG
HE
IGH
T
ISOILLUMINANCE PLOT (Footcandle)
250W pulse start metal halide lamp, horizontal lamp orientation Footcandle values based on 12'mounting height, 25000 rated lumens.
-2
-1
0
1
2
3
4
50 1 2 3 4 5 6
52.5
1.51
0.5
0.25
Luminaire Efficiency: 77%
DIS
TAN
CE
IN U
NIT
S O
F M
OU
NTI
NG
HE
IGH
T
ISOILLUMINANCE PLOT (Footcandle)
400W pulse start metal halide lamp, horizontal lamp orientation Footcandle values based on 12'mounting height, 38000 rated lumens.
-2
-1
0
1
2
3
4
50 1 2 3 4 5 6
52.5
1.51
0.5
0.25
Luminaire Efficiency: 70%
TM
Square DTM brand SurgelogicTM SDSA3650 products are compact and affordable Surge Protective Devices (SPDs). SDSA3650 SPDs offer a simple means to bring down initial surges to manageable levels and can offer addtional value in a cascaded SPD system. Their compact design allows surge suppression to be installed adjacent to power panels or directly on sensitive equipment.
SDSA3650 SPDs Square D Type 1Surge Protective Devices
PerformanceSurge Current Rating per Phase 40kAShort Circuit Current Rating 200kAModes of Protection 6Fusing Individually fused MOVs Thermal Fusing YesOvercurrent Fusing YesOperating Frequency 50/60 Hz
Mechanical DescriptionEnclosure PlasticNEMA Rating NEMA Type 4XConnection Method #12 AWGWeight 1.8 lbsMounting Method Close Nippled, Back MountedOperating Altitude Sea Level-12,000’ (3,658 m)Storage Temperature -40˚ F to +149˚ F (-40˚ C to +65˚ C)Operating Temperature -40˚ F to +149˚ F (-40˚ C to +65˚ C)DiagnosticsGreen status LED Listings and PerformancecULus Listed per UL 1449 3rd edition Type 1 SPD, UL 1283, CSA C22.2 No. 8-M1986, C233.1-87CE marked (IEC 61643-11)
SDSA3650 SPDsSuperior Performance Square D brand Surgelogic SDSA3650 SPDs utilize high-energy suppression circuitry that can be located at any point in the electrical system. As a Type 1 rated device, they have the flexibility to be used with or without an Overcurrent Protection Device (OCPD).
SDSA3650 SPDs provide surge suppression for equipment from severe transient activity. Each metal oxide varistor (MOV) is individually fused and the products carry a NEMA Type 4X rating suitable for installing indoors, outdoors, or in other harsh environments.
Easy InstallationSurgelogic SDSA3650 SPDs are some of the most versatile, yet compact devices available on the market today. This compact package can be mounted on an electrical panel, meter socket, or inside electrical control cabinets.
WarrantyThe SDSA3650 and SDSA3650D warranty is 2 years.
0.5 [17.7]NPT straight
3.00[76]
3.60[92]
3.39[86]
2.64[67]
in.[mm]
VoltageSurge Current per Phase
Modes of Protection Configuration Model Number MCOV SCCR In
The SDSA3650 is a four-wire surge suppressor designed for use on all solidly grounded systems up to 600Y/347 Vac. The SDSA3650D is a three-wire surge suppressor designed for delta applications up to 600 Vac.
Square D and SurgeLogic are trademarks or registered trademarks of Schneider Electric and/or its affiliates in the United States and/or other countries. Other marks used herein may be the property of their respective owners.