Ici project 2

T. Y. LININTERNATIONAL SDN BHD

Civil & Structural Engineers

Dr. Lim Yeow BengThe Principal of

the company

Introduction of Construction Industry

October 2014

school interview

02

Content

Boon Yi Fung 0318300

Chong Zhao Lun 0320408

Khoo Zer Kai 0320500

Deong Khai Keat 0320055

Teh Qing Da 0318590

Foo Zhi Fung

03

04

06

08

10

11

Profile

Company Background

Project 1

Project 2

Organizational Chart

Advise for future C&S Engineer

Group Members

Ir. Dr. Lim Yeow Beng, is a registered Professional Engineer with more than 28 years of practical experience, graduated with Honours in 1984 from the National University of Singapore. In the years 1984 to 1989, he works at Singapore after he graduated from National University of Singapore. While working in consultancy office, he obtained the Degree of Master of Science from the National University of Singapore in 1987. In 1989, he enrolled in the University of Illinois at Urbana-Champagne where he graduated with the Degree of Doctor of Philosophy (PhD) in 1994. In the years 1994 to 1995, he came back to Malaysia and work as a Design Engineer in the Protek Engineers Sdn. Bhd. He has been with T.Y. Lin International Sdn. Bhd. since 1995 and is currently holding the position of Principal in the company. He is involved substantially in the design of Civil and Structural works. He has successfully completed more than twenty projects such as condominiums, hotels, office towers, renovation and strengthening of existing buildings and retail malls.

03

DR. LIM YEOW BENG

T.Y.LIN have established itself as a leading consulting practice which offers a complete spectrum of professional services ranging from feasibility studies, cost estimate, contract documentation, design and contract management to supervision. T.Y.LIN have established a notable track record in the design of long span and high-rise structures. Their design in prestressed and precast concrete and structural steel have also gained particular renown.

It affiliation with T.Y.LIN international and other regional offices allow it to draw from the accumulated pool of experience covering the entire range of engineering expertise. Of particular interest, T.Y.LIN International has among other innovation, pioneered the application of prestressing technique on steel girders to increase their efficiency.

T. Y. LIN IN

04

pavilion, kl

berjaya times square, kl

!!!!!!!!! !T.Y.LIN are fully equipped with up-to-date computer softwares for both design and drafting.

T.Y.LIN INTERNATIONAL Sdn Bhd (TYLI) is a civil and structural consulting practice and a member of the T.Y.Lin

International Group based in San Francisco, California, USA. !Established in 1980 in Johor Bahru, Malaysia, T.Y.LIN subsequently relocated to Kuala Lumpur in the early eighties prompted by a resurgence in the property market in Malaysia capital. In T.Y.LIN International Sdn Bhd has 150 workers in his company. There are many T.Y.Lin international offices in overseas. For example; United States, Singapore, Taiwan, Indonesia, Beijing , Dalian, Chongqing, Shanghai and Guangzhou.

TERNATIONALSDN. BHD.

05

KL Ecocity

Shah Alam Stadium

02

Regency Condominium

& G-Hotel

Persiaran Gurney, Penang !

(1995 - 2000)

!Regacy Condominium is located at Persiaran Gurney, Penang. The Regacy Condominium is a 39 storey condominium consisting of reinforced concrete construction with pre-cast concrete piles foundation. It is 1 block of 37-storey of luxury condominium with two level of basement parking. There have 100 units in this condominium. It had three units in each storey and each unit has around 4000 to 5000 square feet.

The G Hotel is located in along the Gurney drive and also next to the Gurney mall. The G Hotel is a 19 storey hotel consists of shear wall construction. This building is supported by pre-cast concrete piles foundation. It is a 14 storey high storey high tower of 304 rooms,hotel facilities and 2 basement parking.

06

Ir. Dr. Lim acted as a Project Manager in this project. He work with a partner for this project. He also face problem that is didn’t coordinate well with other professions. He tried to extend the time for work, work more harder and communicate with other professions. During 2004, there was a Tsunami in Penang. Many buildings has been affected by the Tsunami included the G Hotels. The G Hotel has some crack lines on the wall. The warranty of the building had been expired, but Dr. Lim want to responsible to his own project that he done before. He went to the Penang and had a maintenance service for the building. However, they still need to pay for Dr. Lim for the service check.

‘My role in G Hotel project is a Project Manager. The first project we start is just only 2 people including me. We are doing all the drawings of the structure plan of the building and the other stuff by ourselves. We gave advise to the owner on what type of the structure that suitable for the building. I am also the one who design this building. For example, I designed the foundation and the position of the column and beam put in the building.

What role are you involved in this projects?

07

Nu Sentral Mall

& Office (Lot G),

Kuala Lumpur Sentral,

Kuala Lumpur (2008-2013)

!Nu Sentral Mall is located in Kl Sentral, Brickfields. Nu Sentral is part of the RM1.4 billion investment by Malaysian Resources Corporation Berhad (MRCB) and Pelaburan Hartanah Berhad (PHB). This development consists of a 7 storey retail mall and a 33 storey office block with 4 levels of basement car parks. The retail mall is supported by raft slab while the office block is on bored piles foundation. The retail and office block are constructed using post tensioned and reinforced concrete structures. There is substantial structural steel roof on the retail block due to long span requirements.

08

Ir. Dr. Lim acted as a Project Principal in this project. He work with 6 engineers and he just provide the ideas and guide to them. This project had been delay for one year due to didn’t coordinate well. For example, in every project they will go through this kind of problem such as they come out the drawing and the contractor need to do a lot to it. So they have to solving the problem and as their responsible to done this project with overcome it. He tried to make the project done as soon as possible and luckily this was an in house project. The contractor completed this project in 2010. If this project can't finish on time, they must pay for the loss of the owner.

What role are you involved in this projects?

“My role in Nu Sentral Mall is a Project Principal. I have 6 engineers that work with me in this project. Some of our people are doing for the structural steel and some of them doing for the concrete block. The foundation and all the concept of the building are provided by me. I just provide the idea of drawing. For example, I done a simple sketch for the building then I will pass it to the draftsmen to draw and convert it into AutoCAD. And also I will guide the contractor to ensure that the building was safe.

09

Organizational Chart10

Managing Director

WONG LOO MIN B.Sc.(Civil), MIEM,,MIES, MACEM, PEng

Before construct, we advice architect and developers. We analysis see whether the design fit with their requirements. We also prepare C&S drawing (columns and beams) and tender documents (steel, concrete, doors, windows). We also need to specify the correct way to do.

During construct, make sure they understand and happy with

the price. We engage a residence engineer to do site

inspection and make sure whatever drawn in the drawing and material the contractor use

it. Every two weeks we must have a site meeting for checking and monitor the progress. We need to estimate whether can achieve it on time or not, I f

cannot achieve, try to came out with other solution.

After construct, make sure it is completely done by inspect

with contractor and authorities to sign Certificate of Practical Completion (CPC). After that,

sign for the Certificate of Completion and Compliments (CCC). There are six form for C&S Engineer to sign include earth work, foundation work,

drainage work, water work, sewer work, structure work.

They warranty the building for 12 – 18 months.

What does a C&S Engineer do in construction industry?

DIRECTOR CHIN LEE LENG B.Sc., M.Eng, MIEM, MASCE, MIE(Aust), MACEM, PEng

DIRECTOR KEN LIM

B.Eng.(Hons), MIEM, MASCE, MACEM, PEng

PRINCIPAL LEE KIAN AN B.Eng.(Hons),

PE, MIEM, MIES,

MIE(Aust), CPEng

PRINCIPAL DR. LIM YEOW

BENG B.Eng.(Hons), M.Sc., PhD, MIEM, PEng

PRINCIPAL DR. SYED MANSUR

B. Sc(Hons)., M. Sc., Ph. D., MIEM.,

MICE., PEng.

What’s your advice for future C&S Engineer? !“A lot C&S Engineer not good in basic knowledge, so wish you all can put in more effort to understand on design concept. Although many people nowadays based on computer, but still need to knew the basic knowledge or else you can’t handle it while needed it.”

Dr. Lim Yeow Beng

11

Civil & Structural Engineer