-
ANLEITUNG FÜR EINBAU, BEDIENUNG UND WARTUNG
KESSEL-Badablauf„Classic“Auslauf senkrecht DN 50
Best.Nr. 40 250.20 Produktvorteile
Änderungsstand: 07/2013Sachnummer: 084-112
Dehnfuge zwischen Endbelag und Aufsatzstück legen.
� Drehbares und um 50 mmstufenlos
höhenverstellbaresAufsatzstück
� Optimale Rohrreinigungdurch Herausnehmendes
Geruchverschlusses
� Geruchverschluss selbstreinigend� Niedrige Bauhöhe � mit
fixierter Lippendichtung für
den sicheren Einbau
�
�
084-112_DE_EN_Badablauf_2013_07_084-112 04-05 -1.qxd 25.07.13
09:26 Seite 1
-
Be Au Sy
Produktbeschreibung
� Aufsatzstück drehbar, stufenlos, hö hen -verstellbar um 50 mm.
Auf Bodenniveauanpaßbar, minimale Einbauhöhe durchAbsägen
� Herausnehmbarer Geruchverschluß� Grundkörper� Ausbaufähig und
kombinierbar mitErgänzungsbauteilen (sieheRückseite)
�
�
�
Na ne Ki m
DN 50
135
Minimale Einbauhöhe 145 mmAussparungsmaße 180 x 180 mm
107
min. 10
max.60
084-112_DE_EN_Badablauf_2013_07_084-112 04-05 -1.qxd 25.07.13
09:26 Seite 2
-
Einbau- und Montagetips
Reinigung
Bei vertieftem Einbau Verlängerungsstück Best. Nr. 27146
zwischen Grundkörper undAufsatzstück anbringen.Systemzubehör für
erweiterte Einbaumöglichkeiten siehe Rückseite.
Aufsatzstück drehbar,stufenlos höhenverstellbarohne Absägen
Flexibler Niveauausgleichzwischen Aufsatzstückund
Grundkörper
Minimale Einbauhöhedurch Absägen
n - au ch
Nach Abnehmen des Rostes und Her aus -neh men des
Geruchverschlusses durchKip pen ist eine optimale
Rohrreinigungmöglich.
084-112_DE_EN_Badablauf_2013_07_084-112 04-05 -1.qxd 25.07.13
09:26 Seite 3
-
Einbauvorschlag
� KESSEL-Bodenablauf � Glockengeruchverschluss� Aufsatzstück mit
Schlitzrost � Zwischenstück mit Pressdichtungsflansch�
Systemzubehör für erweiterte Einbaumöglichkeiten siehe
Rückseite.
Sc
Abb. zeigt Best.-Nr. 40250.20 + 27198
Dauerelast. Fuge
084-112_DE_EN_Badablauf_2013_07_084-112 04-05 -1.qxd 25.07.13
09:26 Seite 4
-
Systemzubehör
� Grundkörper aus ABS 40270DN 70, Auslauf senkrechtmit
Geruchverschluss
� Geruchverschluss aus PP 4720050 mm Sperrwasserhöhe
� Verlängerungsstück aus ABS 27145mit Lippendichtung
� Klebeflansch aus ABS 43401mit GegenflanschFlanschbreite 100
mm
� Abdichtungsbahn 43710aus PVC 500 x 500 mm
� Abdichtungsbahn 43730aus EPDM 500 x 500 mm
� Zwischenstück aus ABS 27199mit Klebeflansch und
GegenflanschFlanschbreite 100 mm
� Zwischenstück aus PP 27198mit Pressdichtungsflansch aus
Edel-stahl, Flanschbreite 63 mm
Haltering aus HDPE 27167zur Sickerwasserableitung
Aufsatzstück aus ABS 27193mit Schlitzrost, 150 x 150 mm aus
ABS
� Aufsatzstück aus ABS 27191mit Schlitzrost, 150 x 150 mmaus
Edelstahl, verschraubt
� Aufsatzstück aus PA 27192mit Klemmrand und Schlitzrostaus PVC
Ø 120 mm
Lippendichtung 27148für Zwischenstücke
� Dünnbettaufsatz 47901100 x 100 mm
� Dünnbettaufsatz 47902150 x 150 mm
Schemadarstellung des kompletten Baukastensystems.
Rückstauverschlüsse R Hebeanlagen
Abläufe / Rinnen Abscheider Kleinkläranlagen
084-112_DE_EN_Badablauf_2013_07_084-112 04-05 -1.qxd 25.07.13
09:26 Seite 5
-
Führend in Entwässerung
Privater Wohnungsbauohne Kanalanbindung
1 2 3 4 5
Öffentlicher Bauz.B. Freizeitanlagen
6 4
Privater WohnungsbauEin- und Mehrfamilienhaus
Gewerblicher Bauz.B. Tankstellen
Gewerblicher Bauz.B. Hotel
Öffentlicher Bauz.B. Krankenhaus
4 5
Gewerblicher Bauz.B. Industriebau
1 Rückstauverschlüsse 2 Rückstauhebeanlagen 3 Hebeanlagen
4 Abläufe / Rinnen 5 Abscheider 6 Kleinkläranlagen
1 2 3 4 5
1 2 3 4 5
1 2 3 4
2 3 5
084-112_DE_EN_Badablauf_2013_07_084-112 04-05 -1.qxd 25.07.13
09:26 Seite 6
-
INSTRUCTIONS FOR INSTALLATION, OPERATION AND MAINTENANCE
KESSEL- floor drain „Classic“Outlet vertical DN 50
Order Nr.. 40 250.20 Product advantages
Edition: 07/2013Number: 084-112
Place expansion joint between endcover and attachment piece.
� Attachment piece can be turnedand continuously height-adjusted
by up to 50 mm
� Optimum pipe cleaning by remo-val of odour trap
� Self-cleaning odour trap� Low installation height � With fixed
lip seal for safe
installation
�
�
084-112_DE_EN_Badablauf_2013_07_084-112 04-05 -1.qxd 25.07.13
09:26 Seite 7
-
Produktbeschreibung
� Attachment piece can be turned andcontinuously height-adjusted
by up to50 mm. Can be adapted to floor level,minimum installation
height throughsawing to size
� Removable odour trap� Drain body� Can be extended and combined
with
�
�
�
E
Du the
Op co W co
DN 50
135
107
min. 10
max.60
Minimum installation height 145 mmRecess dimensions 180 x 180
mm
084-112_DE_EN_Badablauf_2013_07_084-112 04-05 -1.qxd 25.07.13
09:26 Seite 8
-
nd to
el, gh
During initial operation, make sure that the odour trap is
completely filled with water. Please checkthe water level at
regular intervals to avoid odour pollution!
Optimal pipe cleaning is possible by taking thecover off and
removing the odour trap by tilting.When the odour trap is replaced,
it must becompletely filled with water.
Attachment piece can be tur-ned and continuously
height-adjusted
Flexible level adjustment between attachment pieceand drain
body
Minimum installation height by sawing the attachment piece as
required
Assembly tips
Cleaning
084-112_DE_EN_Badablauf_2013_07_084-112 04-05 -1.qxd 25.07.13
09:26 Seite 9
-
� KESSEL-floor drain � Odour trap and counterflange� Cover with
grill � Connection flange
�See next page for system accessories for additional
installation possibilities.
Assembly proposal
Illustration shows 40250.20 + 27198
Expansion jointPolyethylene moisturebarrier
SlopeSlope 1.5 cm Tiles
Screed (3 cm)
Thermal/Sound insulation
4 cm Screed
Concrete floor
Polyethylene moisture membrane
Dimensions in cm
084-112_DE_EN_Badablauf_2013_07_084-112 04-05 -1.qxd 25.07.13
09:26 Seite 10
-
System accessories
� Drain body made of PP 42701DN 50, with side inlet DN 40
� Lip seal 27148for adapters
� Extension made of ABS 27146with lip seal
� Adhesive flange made of ABS 43401with counterflangeFlange
width 100 mm
� PVC sealing sheet 43710500 x 500 mm
� EPDM sealing sheet 43730500 x 500 mm
� ABS adapter 27199with adhesive flange and counterflange,flange
width 100 mm
� PP adapter 27198with pressure sealing flange made ofstainless
steel, flange width 63 mm
Supporting ring made of HDPE 27167for discharging seepage
water
Attachment piece made of ABS 27193with slotted cover, 150 x 150
mm ABS
� Attachment piece made of ABS 27191with slotted cover, 150 x
150 mm made ofstainless steel, screwed in place
� Attachment piece made of PA 27192with clamping edge and white
slottedcover Ø 120 mm made of plastic
Variofix shallow bed attachment 47901ABS, with slotted cover,
100 x 100 mm
� Variofix shallow bed attachment 47902ABS, with slotted cover,
150 x 150 mm
Schematic representation of the whole modular system.
The KESSEL floor/bathroom and roof drains bodies and attachment
pieces made of plastic can be combined with thosemade of stainless
steel size 1. Please send your inquiry to our Sales department.
Backwater valves Lifting stations
Lifting stations Separators Septic Systems
084-112_DE_EN_Badablauf_2013_07_084-112 04-05 -1.qxd 25.07.13
09:26 Seite 11
-
Leading in Drainage
Private homes withoutpublic sewage connection
1 2 3 4 5
Public buildings(e.g. leisure facility)
6 4
Private homes/multifamilyapartments/flats
Commercial buildings(e.g. gas/petrol station)
Commercial buildings(e.g. hotel)
Public buildings(e.g. hospital)
4 5
Commercial buildings(e.g. industrial / manu-facturing
facilities)
1 Backwater valves 2 Wastewater Lifting system 3 Lifting
stations
3 Lifting stations 5 Separators 6 Septic Systems
1 2 3 4 5
1 2 3 4 5
1 2 3 4
2 3 5
084-112_DE_EN_Badablauf_2013_07_084-112 04-05 -1.qxd 25.07.13
09:26 Seite 12