ANLEITUNG FÜR EINBAU, BEDIENUNG UND WARTUNG
KESSEL-Badablauf „Der Superflache“Auslauf seitlich DN 50
Best.Nr. 42701.20 Produktvorteile
Änderungsstand: 04/2011-HGSachnummer: 042-110
Dehnfuge zwischen Endbelag und Aufsatzstück legen.
� Niedrigste Einbauhöhe(inkl. Rost 95 mm)
� Drehbares und um 50 mm stufenloshöhenverstellbares
Aufsatzstück
� Optimale Rohrreinigung durch Heraus -nehmen des Geruch ver
schlus ses
� flexibler Auslaufstutzen max. 5°
� Einfachster Einbau
� Schlitzrost Edelstahl h 100 mm (Klasse K3)
Produktbeschreibung
� Aufsatzstück drehbar, stufenlos hö hen verstellbar um 50 mm.
Auf Bo den niveau anpaßbar, mini-male Ein bau höhe durch
Absägen
� HerausnehmbarerGeruchverschluss
� Grundkörper� Seitlicher Zulauf DN 40� Ausbaufähig und
kombinierbar mitErgänzungsbauteilen (sieheRückseite)
Minimale Einbauhöhe 95 mmAussparungsmaße 260 x 180 mm
�
�
�
�
Einbau- und Montagetipps
Bei Inbetriebnahme ist darauf zu achten, daß der
Geruchverschluss vollständig mit Was sergefüllt ist. Bitte
kontrollieren Sie den Wasserstand in regelmäßigen Abständen, um ei
neGeruchsbelästigung zu vermeiden!
Nach Abnehmen des Rostes undHer aus neh men des Geruch ver
-schlus ses durch Kip pen ist eineoptimale Rohrreinigung
möglich.Bei Wiedereinbau den Geruch -ver schluss vollständig
mitWasser füllen.
Aufsatzstück drehbar,stufenlos höhenverstellbar
Flexibler Niveauausgleichzwischen Aufsatzstückund
Grundkörper
Minimale Einbauhöhedurch Absägendes Aufsatzstückes
Reinigung
Einbauvorschlag
� KESSEL-Badablauf „Der Superflache“ � Aufsatz mit Rost�
Geruchverschluß
� Systemzubehör für erweiterte Einbaumöglichkeiten siehe
Rückseite.
Systemzubehör
� Grundkörper aus PP 42701DN 50, mit seitlichemZulauf DN 40
� Lippendichtung 27148für Zwischenstücke
� Verlängerungsstück aus ABS 27146mit Lippendichtung
� Klebeflansch aus ABS 43401mit GegenflanschFlanschbreite 100
mm
� Abdichtungsbahn 43710aus PVC 500 x 500 mm
� Abdichtungsbahn 43730aus EPDM 500 x 500 mm
� Zwischenstück aus ABS 27199mit Klebeflansch und
GegenflanschFlanschbreite 100 mm
� Zwischenstück aus PP 27198mit Pressdichtungsflansch
ausEdelstahl, Flanschbreite 63 mm
Haltering aus HDPE 27167zur Sickerwasserableitung
Aufsatzstück aus ABS 27193mit Schlitzrost, 150 x 150 mm aus
ABS
� Aufsatzstück aus ABS 27191mit Schlitzrost, 150 x 150 mmaus
Edelstahl, verschraubt
� Aufsatzstück aus PA 27192mit Klemmrand und weißem SchlitzrostØ
120 mm aus Kunststoff
Variofix-Dünnbettaufsatz 47901aus ABS, mit Schlitzrost 100 x 100
mm
� Variofix-Dünnbettaufsatz 47902aus ABS, mit Schlitzrost 150 x
150 mm
Schemadarstellung des kompletten Baukastensystems.
Die KESSEL-Boden-/Bad- und Deckenablauf-Grundkörper und
-Aufsatzstücke aus Kunststoff sind mit denen aus Edelstahl Größe 1
kombinierbar. Bitte richten Sie Ihre Anfrage an unseren
Verkauf.
Führend in Entwässerung
Privater Wohnungsbauohne Kanalanbindung
1 2 3 4 5
Öffentlicher Bauz.B. Freizeitanlagen
6 4
Privater WohnungsbauEin- und Mehrfamilienhaus
Gewerblicher Bauz.B. Tankstellen
Gewerblicher Bauz.B. Hotel
Öffentlicher Bauz.B. Krankenhaus
4 5
Gewerblicher Bauz.B. Industriebau
1 Rückstauverschlüsse 2 Rückstauhebeanlagen 3 Hebeanlagen
4 Abläufe / Rinnen 5 Abscheider 6 Kleinkläranlagen
1 2 3 4 5
1 2 3 4 5
1 2 3 4
2 3 5
042-110 Superflach_D_EN_042-110 Superflach 3-06.qxd 15.07.13
11:24 Seite 1
INSTRUCTIONS FOR INSTALLATION, OPERATION AND MAINTENANCE
KESSEL-bathroom drain“Superflat” Side outlet DN 50
Nr. 42701.20 Product advantages
Edition: 04/2011-HGNumber: 042-110
Place expansion joint between endcover and attachment piece.
� Minimum installation height (incl. cover 95 mm)
� Attachment piece can be turned andcontinuously height-adjusted
by up to50 mm
� Optimum pipe cleaning by removal ofodour trap
� Flexible outlet use max. 5°
� Simple installation
� Slotted cover stainless steel ❏ 100 mm(Class K3)
Product description
� Attachment piece can be turned andcontinuously height-adjusted
by upto 50 mm. Can be adapted to floorlevel, minimum installation
heightthrough sawing to size
� Removable odour trap� Drain body� Side inlet DN 40� Can be
extended and combined with supplementary components(see
reverse)
Minimum installation height 95 mmRecess dimensions 260 x 180
mm
�
�
�
�
Assembly tips
During initial operation, make sure that the odour trap is
completely filled with water. Pleasecheck the water level at
regular intervals to avoid odour pollution!
Optimal pipe cleaning is possibleby taking the cover off and
remo-ving the odour trap by tilting.When the odour trap is
replaced,it must be completely filled withwater.
Attachment piece can be tur-ned and continuously
height-adjusted
Flexible level adjustment between attachment pieceand drain
body
Minimum installation height by sawing the attachment piece as
required
Cleaning
Assembly proposal
� KESSEL-Bathroom drain „Superflat“� Attachment piece with
cover� Odour trap
� See next page for system accessories for extended installation
possibilities.
System accessories
� Drain body made of PP 42701DN 50, with side inlet DN 40
� Lip seal 27148for adapters
� Extension made of ABS 27146with lip seal
� Adhesive flange made of ABS 43401with counterflangeFlange
width 100 mm
� PVC sealing sheet 43710500 x 500 mm
� EPDM sealing sheet 43730500 x 500 mm
� ABS adapter 27199with adhesive flange and counterflange,flange
width 100 mm
� PP adapter 27198with pressure sealing flange made ofstainless
steel, flange width 63 mm
Supporting ring made of HDPE 27167for discharging seepage
water
Attachment piece made of ABS 27193with slotted cover, 150 x 150
mm ABS
� Attachment piece made of ABS 27191with slotted cover, 150 x
150 mm made ofstainless steel, screwed in place
� Attachment piece made of PA 27192with clamping edge and white
slottedcover Ø 120 mm made of plastic
Variofix shallow bed attachment 47901ABS, with slotted cover,
100 x 100 mm
� Variofix shallow bed attachment 47902ABS, with slotted cover,
150 x 150 mm
Schematic representation of the whole modular system.
The KESSEL floor/bathroom and roof drains bodies and attachment
pieces made of plastic can be combined with thosemade of stainless
steel size 1. Please send your inquiry to our Sales department.
Concrete floor
Heat/footfall sound insulation
Expansion jointTile adhesive
Cement floor
Leading in Drainage
Private homes withoutpublic sewage connection
1 2 3 4 5
Public buildings(e.g. leisure facility)
6 4
Private homes/multifamilyapartments/flats
Commercial buildings(e.g. gas/petrol station)
Commercial buildings(e.g. hotel)
Public buildings(e.g. hospital)
4 5
Commercial buildings(e.g. industrial / manu-facturing
facilities)
1 Backwater valves 2 Wastewater Lifting system 3 Lifting
stations
4 Drains and Channels 5 Separators 6 Septic Systems
1 2 3 4 5
1 2 3 4 5
1 2 3 4
2 3 5
042-110 Superflach_D_EN_042-110 Superflach 3-06.qxd 15.07.13
11:24 Seite 2