This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
F I N I S H S C H E D U L E *provide 10% attic stock of all carpet tile, floor and wall tile, ceiling tile, paint, VCT, base and rubber flooring*FlooringCPT-1 B-1
BaseDecription: Rubber Base (Used with CPT-1 and VCT)Manufacturer: AllstateColor: A93Size: 2 1/2" use straight base at carpet and coved at VCTNote: Provide Rolled Goods
Description: Carpet Tile, Install with releasable glue.Manufacturer: Lee'sStyle: Braided Stream #GT047Color: #404 Aged EucalyptusFace Yarn: Antron Legacy Nylon, type 6.6Gauge: 1/12Dye Method: Yarn DyedBacking: Encycle Modular by Lee's - 100% PVC FreeThermoplastic CompositeSize: 24" x 24"Note: Contractor to verify installation patternw/Architect prior to starting the installation.
P-1 Description: Paint (Typical)Manufacturer: Benjamin MooreColor: Distant Gray #OC-68Finish: EggshellNote: Provide a 10' X 10' mockup in space forDesigner's approval prior to ordering paint
P-3 Description: Paint (Accent)Manufacturer: Benjamin MooreColor: Old Salem Gray #HC-94Finish: EggshellNote: Provide a 10' x 10' mockup in space forDesigner's approval prior to ordering paint.
Walls
B-2 Decription: Rubber Base (Used with rubber flooring)Manufacturer: RoppeColor: 194 Burnt UmberSize: 2 1/2" cove baseNote: Provide Rolled Goods
P-2 Description: Paint (Accent)Manufacturer: Benjamin MooreColor: Maryville Brown #HC-75Finish: EggshellNote: Provide a 10' X 10' mockup in space forDesigner's approval prior to ordering paint
Manufacturer: PorcelanosaStyle: Block #V51215031Color: Wenge, matte finishSize: 6" x 26" with 1/16" grout jointNote:Use manufacturer's recommended adhesives.Use a self- bonding, sheet applied eslastomeric membrane,1/16" thick from NAC, ECB anti fracture membrane,contact 1-800-633 4622
CT-2 Description: Porcelain Tile (restroom flooring)Manufacturer: Dal TileStyle: VerandaColor: #P522 PatinaSize: 6 1/2" x 20" with 1/16" grout jointNote: Install in an ashlar pattern.
CT-3 Description: Glass Tile (restroom accent tile)Manufacturer: Dal TileStyle: Mosaic TileColor: #P66 Rainforest BlendSize: 1" x 1"Note: Install with a white backer.
CT-4 Description: Porcelain Tile (restroom wall tile)Manufacturer: Dal TileStyle: Rittenhouse SquareColor: #K775 Matte BiscuitSize: 3" x 6"Note: Install in an ashlar pattern.
CT-5 Description: Stone Mosaics (corridor accent floor tile)Manufacturer: Walker ZangerStyle: Zen GardenColor: #2ZGATWH12Size:12" x 12"Note: Install using white multi-purpose thin set &sanded epoxy grout. Use a sealer on the stones.
CT-6 Description: Glass Tile (break room backsplash)Manufacturer: Surfaces UnlimitedStyle: Vision GlassColor: #EV-03 Brown FlickerSize:1" x 4"Note: Install using a white backer.
B-3 Decription: Ceramic Tile Cove Base (Used in restrooms)Manufacturer: Dal TilePattern: VerandaColor: #P522 PatinaSize: #S-36E9T 6" x 13"
Description: Wood Mosaics (Accent Wall)Manufacturer: PorcelanosaPattern: Mosaics Brick Wood #L106200061Size: 273 mm wide x 280 mm length x 10 mm thickNote: Install tiles without joints and use manufacturer'srecommended adhesives.
Description: Cast Glass (Reception Desk)Manufacturer: Pulp StudiosPattern: #1036Size: Maximum dimensions 44" x 110"Note: Contact 310-815-4999
GL-2
P-4 Description: Paint (Accent)Manufacturer: Benjamin MooreColor: Van Buren Brown #HC-70Finish: EggshellNote: Provide a 10' x 10' mockup in space forDesigner's approval prior to ordering paint.
Description: Paint (Accent in Breakroom)Manufacturer: Benjamin MooreColor: Henderson Buff #HC-15Finish: EggshellNote: Provide a 10' x 10' mockup in space forDesigner's approval prior to ordering paint.
Description: Frosted Film applied to glassNote: Provide samples to Architect for approval/selectionContact: Foxmark, Jamie Garza, 713-329-5423
FF-1
Description: Graphic (neighborhood maps) printed on filmand applied to glassNote: Contact: Foxmark, Jamie Garza, 713-329-5423
FF-2
Description: Tile FlooringManufacturer: Dal TileColor: D109 Architectural GraySize:1" x 1"Note: Install using white multi-purpose thin set & sandedepoxy grout.
CT-7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
G E N E R A L N O T E S P L A N N O T E SProvide vinyl transition strip between carpet and VCT. Vinyl stripto match Roppe 147 Light Brown. Refer to details on IA9.10
A. Refer to Project Information Sheet for legend of Reference Symbols and other graphic indicators/symbols..B. Refer to elevations for scheduled finishes.C. Refer to reflected ceiling plan for ceiling grid and tile specifications and finishes.D. Refer to door schedule for door and frame finishes.E. All surfaces which are to receive finishes are to be clean, true and free from irregularities.F. Existing base building restrooms, stairwells, janitor closets and other core elements are not in contract, unless otherwise noted (shown hatched).G. Contractor to submit two samples of each finish to architect for approval. Submittals to be identified with finish code, name, date, number, formula, sheen and texture asrequired. Contractor to place full order only after written approval of acceptance is received. Adequate time shall be allowed for review and re - submittal as required.H. No substitutions of grade, quality, or manufacturer shall be allowed without written approval from the Architect or Tenant.J. Carpet shall lay in same direction unless shown otherwise. Carpet to receive a minimum of seams with no cross-joints. Avoid seaming near doors and corners.Contractor shall provide two copies of seaming submittals to Architect for approval prior to placing order. Carpet shall be trimmed evenly and neatly for a tight fit at walls,projections, trim strips or reveals. Final installation shall be free from ripples and punctures and per manufacturer's and industry standards. Architect shall make finaldetermination.K. Transition between two dissimilar floor finishes is to occur at the centerline of door or cased opening, unless otherwise noted. Float floor as required so top of finishes areflush. Install rubber trim strips at transition between carpet and resilient tile. Color to match base.L. All VCT to be cleaned and waxed prior to final punch list.M. Refer to manufacturer's instructions for temperature of surfaces to be painted and surrounding air. Do not apply materials when relative humidity exceeds 85% and do notapply to damp or wet surfaces.N. All carpeted areas to be cleaned and vacuumed prior to final inspection. All VCT, wood, tile, stone, sealed concrete or other hard surface floor finishes to be cleaned andwaxed prior to final inspection.P. All floors to be Cpt-1, unless noted otherwise.Q. All base to be B-1, unless noted otherwise.R. All walls to be P-1, unless noted otherwise.S. All suspended drywall ceilings to be painted to match adjacent ceiling tiles.T. All reveal conditions to be painted to match adjacent walls, unless otherwise noted.U. Graphics and Signage installed by others, unless noted otherwise.V. VOC levels must not exceed specified limits for all paints, coatings, adhesives and sealants. See VOC Requirements on page IA0.10.W. Same as note 4 under LEED requirments on page IA0.10.
Provide metal Schluter strip between carpet and ceramic tile floor.Refer to details on IA9.10.Install ceramic tile in an ashlar pattern.
Install base B-2 at all cork-rubber flooring.
Install base B-3 in this room.Install VCT over plywood decking and between rails of highdensity shelving.Install RF-1 (24"W), RF-2 (24"W) and RF-3 (3"W) in alternating stripes.Stripes to run perpendicular to the window wall.Accent paint color to end at glass frame.
Install VCT in a 24" x 24" checkerboard pattern.
Refer to elevations for exact finish locations.
Existing finishes to remain.
ADD ALTERNATE #6: Purchase carpet CPT-1 for this area, but do not install.Stain existing concrete to match CT-2. Seal concrete after it hasbeen stained.Refer to A4/IA9.13 for flush base detail of B-4 base.
Refer to C3/IA9.10 for end partition detail of scheduled tile wrapping corner.
Install CT-4 on all wet wall locations in the shower enclosure (three sides on walland ceiling). Install schluter trim (detail C3/IA9.10) on all corner conditions. Providefull height schluter trim where wall and ceiling enclosure stops at gyp. bd. beyond shower. Provide CT-7 on showing flooring enclosure.
F I N I S H S C H E D U L E *provide 10% attic stock of all carpet tile, floor and wall tile, ceiling tile, paint, VCT, base and rubber flooring*FlooringCPT-1 B-1
BaseDecription: Rubber Base (Used with CPT-1 and VCT)Manufacturer: AllstateColor: A93Size: 2 1/2" use straight base at carpet and coved at VCTNote: Provide Rolled Goods
Description: Carpet Tile, Install with releasable glue.Manufacturer: Lee'sStyle: Braided Stream #GT047Color: #404 Aged EucalyptusFace Yarn: Antron Legacy Nylon, type 6.6Gauge: 1/12Dye Method: Yarn DyedBacking: Encycle Modular by Lee's - 100% PVC FreeThermoplastic CompositeSize: 24" x 24"Note: Contractor to verify installation patternw/Architect prior to starting the installation.
P-1 Description: Paint (Typical)Manufacturer: Benjamin MooreColor: Distant Gray #OC-68Finish: EggshellNote: Provide a 10' X 10' mockup in space forDesigner's approval prior to ordering paint
P-3 Description: Paint (Accent)Manufacturer: Benjamin MooreColor: Old Salem Gray #HC-94Finish: EggshellNote: Provide a 10' x 10' mockup in space forDesigner's approval prior to ordering paint.
Walls
B-2 Decription: Rubber Base (Used with rubber flooring)Manufacturer: RoppeColor: 194 Burnt UmberSize: 2 1/2" cove baseNote: Provide Rolled Goods
P-2 Description: Paint (Accent)Manufacturer: Benjamin MooreColor: Maryville Brown #HC-75Finish: EggshellNote: Provide a 10' X 10' mockup in space forDesigner's approval prior to ordering paint
Manufacturer: PorcelanosaStyle: Block #V51215031Color: Wenge, matte finishSize: 6" x 26" with 1/16" grout jointNote:Use manufacturer's recommended adhesives.Use a self- bonding, sheet applied eslastomeric membrane,1/16" thick from NAC, ECB anti fracture membrane,contact 1-800-633 4622
CT-2 Description: Porcelain Tile (restroom flooring)Manufacturer: Dal TileStyle: VerandaColor: #P522 PatinaSize: 6 1/2" x 20" with 1/16" grout jointNote: Install in an ashlar pattern.
CT-3 Description: Glass Tile (restroom accent tile)Manufacturer: Dal TileStyle: Mosaic TileColor: #P66 Rainforest BlendSize: 1" x 1"Note: Install with a white backer.
CT-4 Description: Porcelain Tile (restroom wall tile)Manufacturer: Dal TileStyle: Rittenhouse SquareColor: #K775 Matte BiscuitSize: 3" x 6"Note: Install in an ashlar pattern.
CT-5 Description: Stone Mosaics (corridor accent floor tile)Manufacturer: Walker ZangerStyle: Zen GardenColor: #2ZGATWH12Size:12" x 12"Note: Install using white multi-purpose thin set &sanded epoxy grout. Use a sealer on the stones.
CT-6 Description: Glass Tile (break room backsplash)Manufacturer: Surfaces UnlimitedStyle: Vision GlassColor: #EV-03 Brown FlickerSize:1" x 4"Note: Install using a white backer.
B-3 Decription: Ceramic Tile Cove Base (Used in restrooms)Manufacturer: Dal TilePattern: VerandaColor: #P522 PatinaSize: #S-36E9T 6" x 13"
Description: Wood Mosaics (Accent Wall)Manufacturer: PorcelanosaPattern: Mosaics Brick Wood #L106200061Size: 273 mm wide x 280 mm length x 10 mm thickNote: Install tiles without joints and use manufacturer'srecommended adhesives.
Description: Cast Glass (Reception Desk)Manufacturer: Pulp StudiosPattern: #1036Size: Maximum dimensions 44" x 110"Note: Contact 310-815-4999
GL-2
P-4 Description: Paint (Accent)Manufacturer: Benjamin MooreColor: Van Buren Brown #HC-70Finish: EggshellNote: Provide a 10' x 10' mockup in space forDesigner's approval prior to ordering paint.
Description: Paint (Accent in Breakroom)Manufacturer: Benjamin MooreColor: Henderson Buff #HC-15Finish: EggshellNote: Provide a 10' x 10' mockup in space forDesigner's approval prior to ordering paint.
Description: Frosted Film applied to glassNote: Provide samples to Architect for approval/selectionContact: Foxmark, Jamie Garza, 713-329-5423
FF-1
Description: Graphic (neighborhood maps) printed on filmand applied to glassNote: Contact: Foxmark, Jamie Garza, 713-329-5423
FF-2
Description: Tile FlooringManufacturer: Dal TileColor: D109 Architectural GraySize:1" x 1"Note: Install using white multi-purpose thin set & sandedepoxy grout.
CT-7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
G E N E R A L N O T E S P L A N N O T E SProvide vinyl transition strip between carpet and VCT. Vinyl stripto match Roppe 147 Light Brown. Refer to details on IA9.10
A. Refer to Project Information Sheet for legend of Reference Symbols and other graphic indicators/symbols..B. Refer to elevations for scheduled finishes.C. Refer to reflected ceiling plan for ceiling grid and tile specifications and finishes.D. Refer to door schedule for door and frame finishes.E. All surfaces which are to receive finishes are to be clean, true and free from irregularities.F. Existing base building restrooms, stairwells, janitor closets and other core elements are not in contract, unless otherwise noted (shown hatched).G. Contractor to submit two samples of each finish to architect for approval. Submittals to be identified with finish code, name, date, number, formula, sheen and texture asrequired. Contractor to place full order only after written approval of acceptance is received. Adequate time shall be allowed for review and re - submittal as required.H. No substitutions of grade, quality, or manufacturer shall be allowed without written approval from the Architect or Tenant.J. Carpet shall lay in same direction unless shown otherwise. Carpet to receive a minimum of seams with no cross-joints. Avoid seaming near doors and corners.Contractor shall provide two copies of seaming submittals to Architect for approval prior to placing order. Carpet shall be trimmed evenly and neatly for a tight fit at walls,projections, trim strips or reveals. Final installation shall be free from ripples and punctures and per manufacturer's and industry standards. Architect shall make finaldetermination.K. Transition between two dissimilar floor finishes is to occur at the centerline of door or cased opening, unless otherwise noted. Float floor as required so top of finishes areflush. Install rubber trim strips at transition between carpet and resilient tile. Color to match base.L. All VCT to be cleaned and waxed prior to final punch list.M. Refer to manufacturer's instructions for temperature of surfaces to be painted and surrounding air. Do not apply materials when relative humidity exceeds 85% and do notapply to damp or wet surfaces.N. All carpeted areas to be cleaned and vacuumed prior to final inspection. All VCT, wood, tile, stone, sealed concrete or other hard surface floor finishes to be cleaned andwaxed prior to final inspection.P. All floors to be Cpt-1, unless noted otherwise.Q. All base to be B-1, unless noted otherwise.R. All walls to be P-1, unless noted otherwise.S. All suspended drywall ceilings to be painted to match adjacent ceiling tiles.T. All reveal conditions to be painted to match adjacent walls, unless otherwise noted.U. Graphics and Signage installed by others, unless noted otherwise.V. VOC levels must not exceed specified limits for all paints, coatings, adhesives and sealants. See VOC Requirements on page IA0.10.W. Same as note 4 under LEED requirments on page IA0.10.
Provide metal Schluter strip between carpet and ceramic tile floor.Refer to details on IA9.10.Install ceramic tile in an ashlar pattern.
Install base B-2 at all cork-rubber flooring.
Install base B-3 in this room.Install VCT over plywood decking and between rails of highdensity shelving.Install RF-1 (24"W), RF-2 (24"W) and RF-3 (3"W) in alternating stripes.Stripes to run perpendicular to the window wall.Accent paint color to end at glass frame.
Install VCT in a 24" x 24" checkerboard pattern.
Refer to elevations for exact finish locations.
Existing finishes to remain.
ADD ALTERNATE #6: Purchase carpet CPT-1 for this area, but do not install.Stain existing concrete to match CT-2. Seal concrete after it hasbeen stained.Refer to A4/IA9.13 for flush base detail of B-4 base.
Refer to C3/IA9.10 for end partition detail of scheduled tile wrapping corner.
Install CT-4 on all wet wall locations in the shower enclosure (three sides on walland ceiling). Install schluter trim (detail C3/IA9.10) on all corner conditions. Providefull height schluter trim where wall and ceiling enclosure stops at gyp. bd. beyond shower. Provide CT-7 on showing flooring enclosure.
F I N I S H S C H E D U L E *provide 10% attic stock of all carpet tile, floor and wall tile, ceiling tile, paint, VCT, base and rubber flooring*FlooringCPT-1 B-1
BaseDecription: Rubber Base (Used with CPT-1 and VCT)Manufacturer: AllstateColor: A93Size: 2 1/2" use straight base at carpet and coved at VCTNote: Provide Rolled Goods
Description: Carpet Tile, Install with releasable glue.Manufacturer: Lee'sStyle: Braided Stream #GT047Color: #404 Aged EucalyptusFace Yarn: Antron Legacy Nylon, type 6.6Gauge: 1/12Dye Method: Yarn DyedBacking: Encycle Modular by Lee's - 100% PVC FreeThermoplastic CompositeSize: 24" x 24"Note: Contractor to verify installation patternw/Architect prior to starting the installation.
P-1 Description: Paint (Typical)Manufacturer: Benjamin MooreColor: Distant Gray #OC-68Finish: EggshellNote: Provide a 10' X 10' mockup in space forDesigner's approval prior to ordering paint
P-3 Description: Paint (Accent)Manufacturer: Benjamin MooreColor: Old Salem Gray #HC-94Finish: EggshellNote: Provide a 10' x 10' mockup in space forDesigner's approval prior to ordering paint.
Walls
B-2 Decription: Rubber Base (Used with rubber flooring)Manufacturer: RoppeColor: 194 Burnt UmberSize: 2 1/2" cove baseNote: Provide Rolled Goods
P-2 Description: Paint (Accent)Manufacturer: Benjamin MooreColor: Maryville Brown #HC-75Finish: EggshellNote: Provide a 10' X 10' mockup in space forDesigner's approval prior to ordering paint
Manufacturer: PorcelanosaStyle: Block #V51215031Color: Wenge, matte finishSize: 6" x 26" with 1/16" grout jointNote:Use manufacturer's recommended adhesives.Use a self- bonding, sheet applied eslastomeric membrane,1/16" thick from NAC, ECB anti fracture membrane,contact 1-800-633 4622
CT-2 Description: Porcelain Tile (restroom flooring)Manufacturer: Dal TileStyle: VerandaColor: #P522 PatinaSize: 6 1/2" x 20" with 1/16" grout jointNote: Install in an ashlar pattern.
CT-3 Description: Glass Tile (restroom accent tile)Manufacturer: Dal TileStyle: Mosaic TileColor: #P66 Rainforest BlendSize: 1" x 1"Note: Install with a white backer.
CT-4 Description: Porcelain Tile (restroom wall tile)Manufacturer: Dal TileStyle: Rittenhouse SquareColor: #K775 Matte BiscuitSize: 3" x 6"Note: Install in an ashlar pattern.
CT-5 Description: Stone Mosaics (corridor accent floor tile)Manufacturer: Walker ZangerStyle: Zen GardenColor: #2ZGATWH12Size:12" x 12"Note: Install using white multi-purpose thin set &sanded epoxy grout. Use a sealer on the stones.
CT-6 Description: Glass Tile (break room backsplash)Manufacturer: Surfaces UnlimitedStyle: Vision GlassColor: #EV-03 Brown FlickerSize:1" x 4"Note: Install using a white backer.
B-3 Decription: Ceramic Tile Cove Base (Used in restrooms)Manufacturer: Dal TilePattern: VerandaColor: #P522 PatinaSize: #S-36E9T 6" x 13"
Description: Wood Mosaics (Accent Wall)Manufacturer: PorcelanosaPattern: Mosaics Brick Wood #L106200061Size: 273 mm wide x 280 mm length x 10 mm thickNote: Install tiles without joints and use manufacturer'srecommended adhesives.
Description: Cast Glass (Reception Desk)Manufacturer: Pulp StudiosPattern: #1036Size: Maximum dimensions 44" x 110"Note: Contact 310-815-4999
GL-2
P-4 Description: Paint (Accent)Manufacturer: Benjamin MooreColor: Van Buren Brown #HC-70Finish: EggshellNote: Provide a 10' x 10' mockup in space forDesigner's approval prior to ordering paint.
Description: Paint (Accent in Breakroom)Manufacturer: Benjamin MooreColor: Henderson Buff #HC-15Finish: EggshellNote: Provide a 10' x 10' mockup in space forDesigner's approval prior to ordering paint.
Description: Frosted Film applied to glassNote: Provide samples to Architect for approval/selectionContact: Foxmark, Jamie Garza, 713-329-5423
FF-1
Description: Graphic (neighborhood maps) printed on filmand applied to glassNote: Contact: Foxmark, Jamie Garza, 713-329-5423
FF-2
Description: Tile FlooringManufacturer: Dal TileColor: D109 Architectural GraySize:1" x 1"Note: Install using white multi-purpose thin set & sandedepoxy grout.
CT-7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
G E N E R A L N O T E S P L A N N O T E SProvide vinyl transition strip between carpet and VCT. Vinyl stripto match Roppe 147 Light Brown. Refer to details on IA9.10
A. Refer to Project Information Sheet for legend of Reference Symbols and other graphic indicators/symbols..B. Refer to elevations for scheduled finishes.C. Refer to reflected ceiling plan for ceiling grid and tile specifications and finishes.D. Refer to door schedule for door and frame finishes.E. All surfaces which are to receive finishes are to be clean, true and free from irregularities.F. Existing base building restrooms, stairwells, janitor closets and other core elements are not in contract, unless otherwise noted (shown hatched).G. Contractor to submit two samples of each finish to architect for approval. Submittals to be identified with finish code, name, date, number, formula, sheen and texture asrequired. Contractor to place full order only after written approval of acceptance is received. Adequate time shall be allowed for review and re - submittal as required.H. No substitutions of grade, quality, or manufacturer shall be allowed without written approval from the Architect or Tenant.J. Carpet shall lay in same direction unless shown otherwise. Carpet to receive a minimum of seams with no cross-joints. Avoid seaming near doors and corners.Contractor shall provide two copies of seaming submittals to Architect for approval prior to placing order. Carpet shall be trimmed evenly and neatly for a tight fit at walls,projections, trim strips or reveals. Final installation shall be free from ripples and punctures and per manufacturer's and industry standards. Architect shall make finaldetermination.K. Transition between two dissimilar floor finishes is to occur at the centerline of door or cased opening, unless otherwise noted. Float floor as required so top of finishes areflush. Install rubber trim strips at transition between carpet and resilient tile. Color to match base.L. All VCT to be cleaned and waxed prior to final punch list.M. Refer to manufacturer's instructions for temperature of surfaces to be painted and surrounding air. Do not apply materials when relative humidity exceeds 85% and do notapply to damp or wet surfaces.N. All carpeted areas to be cleaned and vacuumed prior to final inspection. All VCT, wood, tile, stone, sealed concrete or other hard surface floor finishes to be cleaned andwaxed prior to final inspection.P. All floors to be Cpt-1, unless noted otherwise.Q. All base to be B-1, unless noted otherwise.R. All walls to be P-1, unless noted otherwise.S. All suspended drywall ceilings to be painted to match adjacent ceiling tiles.T. All reveal conditions to be painted to match adjacent walls, unless otherwise noted.U. Graphics and Signage installed by others, unless noted otherwise.V. VOC levels must not exceed specified limits for all paints, coatings, adhesives and sealants. See VOC Requirements on page IA0.10.W. Same as note 4 under LEED requirments on page IA0.10.
Provide metal Schluter strip between carpet and ceramic tile floor.Refer to details on IA9.10.Install ceramic tile in an ashlar pattern.
Install base B-2 at all cork-rubber flooring.
Install base B-3 in this room.Install VCT over plywood decking and between rails of highdensity shelving.Install RF-1 (24"W), RF-2 (24"W) and RF-3 (3"W) in alternating stripes.Stripes to run perpendicular to the window wall.Accent paint color to end at glass frame.
Install VCT in a 24" x 24" checkerboard pattern.
Refer to elevations for exact finish locations.
Existing finishes to remain.
ADD ALTERNATE #6: Purchase carpet CPT-1 for this area, but do not install.Stain existing concrete to match CT-2. Seal concrete after it hasbeen stained.Refer to A4/IA9.13 for flush base detail of B-4 base.
Refer to C3/IA9.10 for end partition detail of scheduled tile wrapping corner.
Install CT-4 on all wet wall locations in the shower enclosure (three sides on walland ceiling). Install schluter trim (detail C3/IA9.10) on all corner conditions. Providefull height schluter trim where wall and ceiling enclosure stops at gyp. bd. beyond shower. Provide CT-7 on showing flooring enclosure.