234 Dimensions in millimeters (inch) unless otherwise stated ACTUAL SIZE www.southco.com/93 Button Maximum door thickness (see table) 32 (1.25) across flats mounting nut Lockwasher Cam 15 (.60) Ø 29 (1.13) Ø 19 (.74) Ø 25 (.98) 16±1.5 (.63±.06) 24±1.5 (.94±.06) C A Grip B Frame location if adjustable keeper is not used B alternate keeper position Keeper: (supplied) Mount keeper with two M3 or No. 6 screws (not supplied) Locks are keyed alike CH751 (2 keys supplied) Different key codes are available. Contact Southco for details Non-locking Locking 1"-20 thread Ejector spring, optional, (order separately) Door Frame G Pull tab in-line with latching cam Edge of door Pull tab perpendicular to latching cam Edge of door SOUTHCO SOUTHCO 29.5 (1.16) 32 (1.25) 45.3 (1.78) 2.4 (.09) 18 (.71) In-line with latching cam Perpendicular to latching cam Door 24±1.5 (.94±.06) 22.2 (.875 ) 9.5±0.2 (.375±.010) Hole centers for mounting keeper Ø 25.5± 0.1 (1.000 ) 16±1.5 (.63±.06) Frame +.010 -.000 +0.3 -0.0 +.010 -.000 7.9 Nm (70 inlbf) Maximum tightening torque for mounting nut 93 Push-to-Close Latch Push button to open • Push button opening • Single hole installation • Optional ejector spring helps prevent rattles Material and Finish Latch: ABS, black Spring: Stainless steel Performance Details Maximum working load: 530 N (120 lbf) Flammability rating: UL94-HB Installation Notes Maximum tightening torque on mounting nut: 7.9 Nm (70 inlbf) Accessories Flat key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01 Overmolded key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01-05 Pull tab (optional) part number: In-line 93-21-301-14 Perpendicular 93-21-322-14 Keeper (replacement) part number: 93-14-101-24 Ejector spring (optional) part number: 93-22-302-18 Part Number See table Style Maximum Door Thickness G Grip Dimensions Latch Part Number A B C Ref Key-Locking (2 Flat Keys Supplied) Non-Locking Pull tab in-line with latching Cam 10.3 (.407) 23 +0.1 -.07 (.907 +0 -.032 ) 29.5±1.5 (1.16±.06) 14.5±1.5 (.57±.06) 37 (1.47) 93-303 93-304 Pull tab perpendicular to latching Cam 10.3 (.407) 23 +0.1 -.07 (.907 +0 -.032 ) 29.5±1.5 (1.16±.06) 14.5±1.5 (.57±.06) 37 (1.47) 93-313 93-314 Latch only 12.7 (.500) 25±0.4 (1.000 +0 -.032) 32±1.5 (1.25±.06) 17±1.5 (.66±.06) 40 (1.57) 93-307 93-308 Other options available. For complete details on variety, part numbers, installation and specification, go to
4
Embed
93 Push-to-Close Latch - Latches, Hinges, Fasteners ... · of door Pull tab perpendicular to latching cam ... 93 Push-to-Close Latch ... 93-303 93-304 Pull tab perpendicular
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
234
Dimensions in millimeters (inch) unless otherwise stated
ACTUAL SIZE
www.southco.com/93
Button
Maximumdoor thickness(see table)
32 (1.25) across flatsmounting nutLockwasher
Cam
15(.60)
Ø 29(1.13) Ø 19
(.74) Ø 25 (.98)
16±1.5(.63±.06)
24±1.5(.94±.06)
C
A
Grip B Frame location if adjustable keeper is not used
B alternate keeper position Keeper: (supplied)Mount keeper withtwo M3 or No. 6screws (not supplied)
Locks are keyed alike CH751(2 keys supplied)
Different key codes are available.
Contact Southco for details
Non-locking Locking 1"-20 thread
Ejector spring, optional,(order separately)
Door
Frame
G
Pull tab in-line with latching cam
Edge of door
Pull tab perpendicular to latching cam
Edge of door
SOUT
HCO
SOUT
HCO
29.5 (1.16) 32(1.25)
45.3(1.78)
2.4(.09)
18(.71)
In-line withlatching cam
Perpendicular tolatching cam
Door
24±1.5(.94±.06)
22.2 (.875 )
9.5±0.2 (.375±.010)Hole centers for mounting keeper
Ø 25.5± 0.1 (1.000 )16±1.5
(.63±.06)
Frame
+.010-.000
+0.3-0.0
+.010-.000
7.9 N�m (70 in�lbf) Maximum tightening torque for mounting nut
93 Push-to-Close LatchPush button to open
• Push button opening• Single hole installation• Optional ejector spring
helps prevent rattles
Material and FinishLatch: ABS, black Spring: Stainless steel
Performance DetailsMaximum working load: 530 N (120 lbf)