The Business of Science ® © Oxford Instruments 2011 Industrial Analysis The Business of Science ® © Oxford Instruments 2011 X-MET7000 for Precious Metals.
Post on 26-Mar-2015
216 Views
Preview:
Transcript
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
The Business of Science®© Oxford Instruments 2011
X-MET7000 for Precious Metals
Rapid / Rugged / Reliable
New look, new feel, new fast user interface, new reporting power
Faster!Lighter!Smaller!
Instant, non-destructive analysis of gold and jewelry
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
In our sales program7 XRF analyser models +
The NEW X-MET70007 OES analyser models11 GaugesComponents (X-ray Tubes
and Detectors)
Industrial Analysis Today
Innovative Solutions for Global Applications
+
The Business of Science®© Oxford Instruments 2011
Industrial Analysis1/2
OI - Industrial Analysis Global Locations
Scotts Valley, USA-X-ray Tubes
- CoatingThickness Gauges
High Wycombe, UKIndustrial Analysis
- MDX1000
Espoo, FinlandIndustrial Analysis
- X-MET- OEM
- X-ray Detectors
ShanghaiIndustrial Analysis
- CMI 900- Lab-X
- X-Supreme- X-Strata
Uedem, GermanyIndustrial Analysis
- OES- Laboratory Systems
- Mobile Spectrometers
Sales offices in - Singapore - India - Czech Republic - US
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
+ 130 Distributors around the world
For various markets and applications
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
Strenghts of portable XRF in Precious Metals analysis
Totally non-destructive method. Analysis leaves no marks on the measured object
Absolutely no chemicals needed!Minimal or no sample preparation neededDirect analysis of both raw materials and
finished products Instant validation of authenticity of jewelry,
coins etc.Screening of unwanted elementsFull analysis information available in secondsDisplay results in Karats and Weight-%
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
Accurate analysis
Standardless FP calibration covers all the elements of interest in precious metals analysis.
All elements measured simultaneouslyStandard element set: Au, Ag, Cd, Co, Cr, Cu, Fe,
Ge, Hg, In, Ir, Mn, Ni, Pb, Pd, Pt, Rh, Ru, Sb, Sn, Ti, Zn
Display results in weight-% and KaratsCustomiseable result screen with programmable
pass/fail functionsElement range K-U Type standard correction
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
Refined simplicity
Over 35 years of experience in portable XRF Intuitive and extremely easy to use graphical user
interfaceSoftware can be ran also on PC, no software
installations neededFull set of accessories available. Bench-top
operation with optional Bench-top stand.Easy reportingUp to 10-12 hours battery life on a single charge!
Two batteries included in the delivery
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
X-MET Analyzers – Key Performance Characteristics
X-MET7000
X-ray tube 40 kV, Rh target
Detector PentaPin® (Si-Pin)
Filter arrangement Fixed filter
Element range K – U
Battery life 10-12 hours
Computer Integrated, 16 GB internal memory
Weight < 1,8 kg
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
Low detection limits for all the key elements
Ni Cu Zn Ru Rh Pd Ag Cd Pt Hg Pb
ppm 103 131 317 366 636 1010 342 1398 1062 307
Limit of detection (LOD) is specified for each matrices in three sigma 99.7% confidence level. Individual LOD's improve as a function of the square root of the testing time. All detection limits are specified for interference free matrix. LOD's are listed in parts per million (ppm). Limit of detection effects on instrument precision (repeatability), but it is not direct indication of instrument accuracy. Limits of detection are dependent on the following factors:
-Matrix Interferences, overlapping elements etc.-Level of statistical confidence-Testing time
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
Lighter, Faster, Smaller...
Designed for heavy use without forgetting the ergonomics
More compact and ergonomic designLightweight, less than 1,8 kg Improved speed: faster calculations, faster
analysis time – save time and improve productivity
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
New intuitive Graphical User Interface Design based on an extensive user research
Improved, intuitive and easy-to-read graphical user interface. Ultimate ease of use.
New attractive functional icons makes learning how to use the instrument quicker. Easy to operate even gloves on.
Bright and high contrast 4,3” Blanview® transmissive LCD touch screen ensures optimal outdoor viewing even in direct sunlight
Result screen can easily be user customized for individual needs e.g. to show only the elements of interest or create informative pass/fail messages
History view for easy browsing of old results and spectra
16 GB internal memory – store up to 100 000 results including spectra!
User interface is available in 12 languages including: English Traditional and simplified Chinese, Japanese, Korean, Russian, Spanish, Portuguese, Polish, German, Italian and French
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
User Interface
Menu screen Spectrum display Result screen
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
User interface in 12 languages
User Interface is available in:
• English• French• Spanish• Italian• Russian• Portuguese
• Japanese• Korean• Traditional Chinese• Simplified Chinese• Polish• German
Customiseable language option available for customer’s own translations
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
New, large easy to read screen
4,3” Blanview™ transmissive LCD touch screen
Largest screen than in any other HHXRF analyser – easier to access the functions and operate the unit with gloves on
Top quality screen for demanding outdoor applications. Easy to read even direct sunlight
Excellent viewing angles
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
Built to last Designed to withstand even the harshest environments High impact resistant housing with environmental sealing Protective rubber bumpers protects the screen, sides of
the analyser nose and the battery – also prevent slipping
to ground for example when the X-MET is placed on a pipe Minimised amount of seams in the casing Withstands dust and splash water, IP54 (NEMA 3)
approved Easy to clean surfaces High visibility orange color New larger heat sink for improved performance in hot
environment. Operating range from -10°C to +50°C (14-122 °F)
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
Longer battery life Up to 10-12 hours battery life – operate a full day on one
battery charge.
Advanced power saving features in onboard computer
Position sensor detects that if the analyser is not in use and initiates power saving functions
New 3.1 Ah (versus old 2.35 Ah) Li-ion battery with battery level indicator
Battery level indicator in GUI in hours
Two batteries included in all sales packages
Universal charged supplied with the unit
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
Ergonomic & compact design
Balanced and compact construction
Convenient grip - more sensitive but yet rugged and accurate trigger
Display optimised for viewing the screen from various different angles. No moving parts of hinges which might break or get jammed
Rubber frame protects the display and eliminates reflections
Three point rubber support for keeping the analyser securely in place when left on the table
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
Safety – the key design criteria Tested by STUK (Finnish Nuclear and Radiation safety authority),
independent test laboratory
With maximum voltage and current settings leaking radiation is less than 1 μSv/h from any surface
Two independent proximity sensors to ensure that the analyser is in contact with the sample before starting the measurement: IR sensor & count rate proximity sensor
Four bright, highly visible “X-RAYS ON” warning lights
Password protected. PIN code is required to initiate the unit and if the analyser is not being used, it will lock itself in 5 minutes
User training is always provided by Oxford Instruments or authorised re-sellers
Large selection of additional radiation safety accessories are available to protect the user from scattered X-rays when measuring small, thin or low density samples.
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
Radiation safety accessories for any measurement purpose
Benchtop stand with a visible “X-RAYS ON” warning light and dual fail to safe interlocks. Large Pb enforced measurement chamber for samples of various shape and size.
Light stand and safety shield for measuring small items such as rings, coins and small jewelry.
Light radiation shield provides protection against scattered X-rays when measuring large and flat samples such as plastic sheet, wood, drywall, soil sample bags etc.
New four layer background plate to normalise the background when measuring small samples such as rings, coins etc.
Benchtop stand
Background plateLight radiationshield
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
Powerful data management
X-MET7000 series analysers can save up to 100 000 results + spectra
Results will be saved automatically in the analysers 16 GB internal flash memory
Results are downloaded by using USB connection
Easy to use Report Generator software included as standard.
Easy deleting of old results
The results can be sorted by method, date and name
All the old results and spectra can always be browsed from the analyser itself, no need for PC connection
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
New simple data connectivity and export software package
Download results to PC via USB
All data communication with X-MET is done through USB port located under a rubber protective bung below the LCD screen
Two USB connectors, one for communicating with external computer and one for USB memory stick for downloading the results and spectra
No modem setup needed, X-MET will communicate with any PC with Windows (XP and up), iOS or Linux operating system.
No software installations needed. X-MET software runs on web browser window.
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
New data export software package –X-MET Report Generator Software
Create customised reports. User can select which elements to show, which results to show, add company information, logo, unit serial number etc.
The software is included in the X-MET standard PC software. It runs in a web browser window
Reporting directly from the analyser in password protected PDF format.
Secured PDF format for ultimate data security - no possibility to tamper with the results
Spectra images can be added in the report
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
Easy and flexible reporting
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
Open software for customer’s own development
Linux based operating system
X-MET Application Programming Interface (X-API) for controlling X-MET and pulling data from it in raw format.
Gives possibility to remotely initiate measurement and gather analysis data
Possible applications e.g. online analysis systems
Enables integration to customer’s own database systems
Oxford Instruments will provide necessary informationabout the system. Programming and development over API will be done by customers.
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
Lighter and smaller case
New much smaller and significantly lighter carry case from German manufacturer
By it’s size and weight it easily meets the airline regulations for check in luggage.
Rugged outdoor case, TüV tested
Stores the analyser, spare battery, charger, quick guides, check samples and the light radiation shield. Several compartments for additional small accessories.
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
Genuine Oxford Instruments’ accessoriesTo boost productivity even further!Accessories to meet your special needs in PMI
testing.
Bench-top Stand. Convert X-MET to bench-top unit in a matter of seconds with Bench-top Stand. Dual fail to safe interlocks and a visible “X-rays on” warning light for uncompromised radiation safety and local compliance.
Light radiation shieldto protect the user when measuring samples that might scatter the
X-rays
Wireless Bluetooth® printer and barcode scanner
Holster for carrying and protecting the X-MET analyser while not in use
Benchtop stand Light radiationshield
Wireless printer Holster
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
X-MET7000 sales packages
X-MET7000 Flexi Package for RoHS, Pb in paint, Toys, Drywall, CCA wood, Precious metals etc.
X-MET7000 Premium Alloy for PMI and Scrap
X-MET7000 Minerals for Mining and Soil analysis
X-MET7000 Demo for demonstrating purposes
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
Our global network provides support inlocal languages
Technical phone support Factory trained personnel On-site repair services Training services Application support Global spare parts warehousing Re-certifications and recalibrations Post warranty local service contracts
The Business of Science®© Oxford Instruments 2011
Industrial Analysis
Delivered as ”turn-key” analysis tool
Each delivery includes calibration certificate Instrument performance is guaranteed by
measuring check sample provided with each instrument
Calibrations can be customised by using e-mail
Analyser is ready to run straight out of the boxMinimal training needed
top related