HOME AUTOMATION SYSTEM Table of Content 1. Abstract----------------------------------------------------------------------------------------3 2. Literature Review -----------------------------------------------------------------------------4…

iButton Presented by HARI.V 1SG06EC026 Under the guidance of Mrs. Shobha. K Mrs. Padmavathi DEFINITION: • The iButton is an electronic chip. • It is armored in a 16mm…

Mach3 Tutorial Setting up a basic three axis milling machine. Based on Mach3 2.0 Purpose. The purpose of this tutorial is to help and to guide the user to, step by step,…

Synaptics PS/2 TouchPad Interfacing Guide PN: 511-000275-01 Rev. A Synaptics PS/2 TouchPad Interfacing Guide PN: 511-000275-01 Rev. A Copyright Copyright © 2009 Synaptics…

DNEPR This User’s Guide contains technical data, the use of which is mandatory for: evaluation of spacecraft/Dnepr-1 launch vehicle compatibility; and preparation of all…

1. Level ITraining Series: Level I 2. Electrical Interface The Back-end 3. Electrical Interface Divided into 2 areas: Operating voltage Output signal type Electrical Interface…

1. Prepared by: Chandrima Ghosh Roy Stream- ECE 2. Introduction • Automation refers to the technique of operating or controlling a process by electronic devices, reducing…

Slide 1Electrical distribution performance & risk management ECOFIT Sepam 2000 by Sepam series 60/80 Customer Presentation INFRASTRUCTURE BUSINESS Jean-Claude MOLLARD…

Slide 1FIRST RESPONDER TRAINING Slide 2 W W W Chevrolet VOLT First Responder Training 2 hr Training Session – Vehicle Introduction – Battery and Electrical Technology…

Slide 1© 2013 Ethernet Alliance1 Moderator: Scott Kipp, President of Ethernet Alliance, Principle Engineer, Brocade Panelist #1: Alan Weckel, Vice President, DellOro group…