Computer Aided Engineering Graphics (ECE-151/251) Indus Institute of Technology and Management Bilhaur, Kanpur-209202 Mechanical Engineering Department Semester I & II…

AutoCAD 2002 UMaT, Tka CHAPTER ONE AUTOCAD 2002 1.1 AUTOCAD 2002 ENVIRONMENT Figure 1.1 shows a typical environment for autocad 2002. The main areas to consider are the model…

1.  Lines Lines are probably the most simple of AutoCADobjects. Using the Line command, a line can be drawn between any two points picked within the drawing area. Lines…

1. 202 s Chapter 3: Manipulating Objects Exercise: Rotate Objects In this exercise, you use the Rotate command to rotate objects in the drawing. You use the default rotate…

PEOPLEâS COLLEGE OF RESEARCH AND TECHNOLOGY DEPARTMENT OF MECHANICAL ENGINEERING DME -306 AUTO CAD EXPERIMENT NO. 1 STUDENTâS NAME ANIL KUMAR ROLL NO PU053161405C5 DATE…

ABSOLUTE COORDINATES: ABSOLUTE COORDINATES: Absolute Coordinates uses the Cartesian System to specify a position in the X, Y, and (if needed) Z axes to locate a point from…

Ex.no.: INTRODUCTION TO AUTOCAD Date: DRAWING AND MODIFYING OBJECTS Autocad is a drafting/modeling software used all over the world by almost all manufacturing companies.…

©2010 Dassault Systèmes, All Rights Reserved DraftSight and the DraftSight logos are trademarks of Dassault Systèmes or its subsidiaries in the US and/or other countries.…

1 WHAT’S NEW IN NANOCAD PLUS 6.0  Donut command.  Gradient hatch. 2  MultiLine line type.  MultiLine Styles dialog:  AuditGeometry command with 2 modes:…

Visit the following websites to learn more about this book: Creating Entities 25 Chapter 3- Creating Entities Objectives: 1. Explore the Draw Toolbar 2. Draw circles, arcs…