Technical Data
ICSF-Select Series
Selective Jet Fluxing
Flux Savings up to 95%
Flux Solid Content up to 40%
Easy Programming
J E T F LU X I N G WAV E S O L D E R I N G
www.interflux.com
Page 1
Technical Data ICSF-Select Series
SELECTIVE JET FLUXER
Benefits
70 to 95% flux savings compared with Conventional
Spray Fluxing.
Very low maintenance.
No external air supply required.
High speed XY movement
Sensitive areas can be programmed to achieve good flux
hole penetration without affecting the residue level of
Key Features
Flux Detection :
Each drop of flux will be monitored
during flux jetting process.
Auto Purge Function :
Fully automatic, without operator
supervision.
Board detection :
A Programmable Ultrasonic Board
Detection Sensor gives a smooth stop
of the PCB with a 2 step action.
Software Optimizer :
This standard software function helps
the operator/engineer to program the
best possible cycle time.
Flux Pump :
The use of a flux pump allows flux top
up while running production and each
PCB can be programmed with a differ-
ent flux jet pressure.
Cycle Time :
The use of servo motors allows speeds
up to 1,500 mm/s to guarantee cycle
times suitable for wave soldering. A
special welded frame with an extra
heavy base plate secures the stability
and best performance possible.
www.interflux.com
Page 2
Technical Data ICSF-Select Series
Interflux Singapore Pte Ltd
2 Kallang Pudding Road #04-12,
Mactech Building, Singapore 349307
www.interflux.sg
Email : [email protected]
Tel : +65 68487818
Specifications
ICSF-Select6 ICSF-Select4
Nozzles One Jet Nozzle (optional 2)
Nozzle Movement Servo, max speed 1,500 mm/s, accuracy ±0.1 mm
Nozzle Movement Area 610 by 610mm 410 by 410mm
Flux pump Pump with brushless DC motor
Flux Drop Size Control High speed solenoid valve, Minimum Pulse 2ms
Flux Flow Control Flux pump with feedback
Power Supply Single phase 220 VAC, 50/60 Hz, 300W
PCB position sensor Ultrasonic, position programmable for each PCB
Outgoing PCB sensor Photo electric
Incoming PCB sensor Photo electric
Conveyor Speed Control Encoder with conveyor speed Calibration + stepper motor,
Conveyor width control Stepper motor with limit switches
Flux Low Level switch Yes (optional 2)
No of flux supply modules One (2 or 6 liters flux Tank), optional 2 Tanks
Emergency stop Yes (2 locations)
Tower light Yes (3 colours)
Controls PLC
Flux Drop Size settings PC , by setting Pulse time, Pulse quantity and pressure
Flux Droplet Control Standard with laser sensor, continuous Flux control
Programming PC, Off-line
Modes of operation Selective (dots, lines, multi-lines and areas)
Selective selection PCB Picture on PC
Recipes Unlimited
Alarms & Events Yes
Conveyor 3 mm stainless steel pin conveyor
SMEMA handshake Standard, up-stream and down-stream
Trending & data logging Optional
Operator security Yes (multiple levels)
Automatic Purge Flux purging system controlled by laser sensor
Barcode reader Optional, Handheld or Fixed Inline to auto-download programs
Exhaust Diameter 100 mm
Exhaust Volume 150 m³/h
Flux Quantity Standard tool to measure the flux quantity used per PCB
Dimensions
Stand Alone L : 1000, W : 1270, H : 1100 mm L : 850, W : 1270, H : 1100 mm
Flux Sensor
Jet Nozzle
Software
www.interflux.com
Distributor Details
J E T F LU X I N G WAVE SOLDERING MADE EASY AND CLEAN
A true Pioneer
Responsible & durable
Support worldwide
www.interflux.com
Environmental friendly
Up to 95% less flux usage
Less maintenance chemicals
Longer life of PCB carriers/pallets
Tremendous reduction in flux fumes
going into the exhaust/environment
Solderability Performance
The ability to program points, lines, multi-lines, areas allows the engi-
neer to decide how much flux is required for certain solder joints up to
complete areas. This capability opens up the process window without
risking excess of flux residues. Thanks to the XY-movement speed up to
1,500 mm/s, the cycle time will be up to the standard required for wave
soldering mass production.