Stainless Steel ANSI Pipe - durbinmetals.co.uk

What is a Pipe?

The term pipe covers a specific range of sizes laiddown by ANSI specifications. Any sizes not covered bythese specifications are tube.

Stainless Steel Pipe dimensions determined by ASMEB36.19 covering the outside diameter and theSchedule wall thickness.

Note that stainless wall thicknesses to ANSI B36.19 allhave an ‘S’ suffix. Sizes without an ‘S’ suffix are toANSI B36.10 which is intended for carbon steel pipes.

CONTACT

Address: Aldridge WarehouseNo. 1 Wharf ApproachAnchor Brook Industrial ParkAldridgeWalsallWS9 8BX

Tel: +44 (0)19 2245 3982Email: [email protected]: www.durbinmetals.co.uk

REVISION HISTORY

Datasheet Updated 18 July 2019

DISCLAIMERThis Data is indicative only and as such is not to be relied upon in place ofthe full specification. In particular, mechanical property requirements varywidely with temper, product and product dimensions. All information isbased on our present knowledge and is given in good faith. No liability willbe accepted by the Company in respect of any action taken by any thirdparty in reliance thereon.

Please note that the 'Datasheet Update' date shown above is no guaranteeof accuracy or whether the datasheet is up to date.

The information provided in this datasheet has been drawn from variousrecognised sources, including EN Standards, recognised industry references(printed & online) and manufacturers’ data. No guarantee is given that theinformation is from the latest issue of those sources or about the accuracy ofthose sources.

Material supplied by the Company may vary significantly from this data, butwill conform to all relevant and applicable standards.

As the products detailed may be used for a wide variety of purposes and asthe Company has no control over their use; the Company specificallyexcludes all conditions or warranties expressed or implied by statute orotherwise as to dimensions, properties and/or fitness for any particularpurpose, whether expressed or implied.

Advice given by the Company to any third party is given for that party’sassistance only and without liability on the part of the Company. Alltransactions are subject to the Company’s current Conditions of Sale. Theextent of the Company’s liabilities to any customer is clearly set out in thoseConditions; a copy of which is available on request.

Stainless SteelANSI Pipe

© Copyright: Durbin Metal Industries Ltd, Parkway House, Unit 6 Parkway Industrial Estate, Wednesbury WS10 7WP

[1 OF 10] CONTINUED



[2 OF 10] CONTINUED



[3 OF 10] CONTINUED



[4 OF 10] CONTINUED



[5 OF 10] CONTINUED



[6 OF 10] CONTINUED



[7 OF 10] CONTINUED



[8 OF 10] CONTINUED



[9 OF 10] CONTINUED



[10 OF 10]

Stainless Steel ANSI Pipe - durbinmetals.co.uk

Documents

Stainless Steel ANSI Pipe - durbinmetals.co.uk