2
:: Introduction:: Introduction
:: Pro4 SC10 RTR Features:: Pro4 SC10 RTR Features
:: Additional:: Additional
:: Other Helpful Items:: Other Helpful Items
Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new vehicle. Please take a moment to read through the manual and familiarize yourself with the steps.We are continually changing and improving our designs; therefore, actual parts may appear slightly different than the illustrations. New parts will be noted on supplementary sheets located in the appropriate parts bags. Check each bag for these sheets before you start to build.
• 2.4GHz 2-channel radio system• High-Torque Digital Servo with spring-style servo saver• Powerful Reedy 3300kV Brushless Motor• Water-resistant high-power Reedy brushless speed control with T-plug connector and LiPo low-voltage cutoff• Three sealed gear differentials• Fifteen52 Turbomac HD wheels • Threaded Oil-filled coil over shock absorbers• 4mm heavy-duty adjustable alloy steel turnbuckles• Durable slider type drive shafts• Factory-finished Contender short course body• High-grip General Tire GT(R) Grabbers all terrain tires • Steel center drive shaft• Four-wheel independent suspension• Durable, impact-absorbing front and rear bumpers with LEDs
Associated Electrics, Inc.21062 Bake Pkwy.
Lake Forest, CA 92630
http://www.RC10.com · http://twitter.com/Team_Associated · http://www.instagram.com/teamassociatedrc/ · http://www.facebook.com/TeamAssociated/
Customer ServiceTel: 949.544.7500Fax: 949.544.7501
Your new Pro4 SC10 comes assembled. The following items are needed for completion. • 6-cell NiMh or 2-3s LiPo battery • Suitable battery charger • (4) AA batteries
Tools included: • 1.5mm, 2.0mm, 2.5mm Wrenches
• Silicone Shock Fluid (Refer to catalog for complete listings) • Silicone Diff Fluid (Refer to catalog for complete listings)• Body Scissors (AE Part # 1737) • Reamer / Hole Punch (#1499) • Shock Pliers (#1675) • Wire Cutters• FT Hex/Nut Wrenches (AE Part # 1650)• Needle Nose Pliers • Hobby Knife • Soldering Iron • Calipers or a Precision Ruler • Green Slime shock lube (AE Part # 1105)• FT Turnbuckle Wrench (#1114) • FT Universal Tire Balancer (#1498)
:: Table of Contents:: Table of Contents1................... Cover
2................... Introduction 3...................1:1 Hardware “Fold Out”
4 - 5............. Quick Start Guide
6 - 19............Steps 1- 41
20.................Tuning Tips
21 - 29....... Catalog/Notes
30................ Back Cover
:: Notes:: Notes
This symbol indicates a special note or instruction in the manual.!
There is a 1:1 hardware foldout page in the front of the manual. To check the size of a part, line up your hardware with the correct drawing until you find the exact size. Each part in the foldout has a number assigned to it for ordering replacement parts.
3
:: Hardware - 1:1 Scale View:: Hardware - 1:1 Scale View
3x3mm (25225)
3x12mm (81258)
4x12mm (25824)
Set Screws
Notes:
2.5x8mm (31448)
2.5x10mm (31350)
3x6mm (31541)
3x12mm (25203)Aluminum (8556)Titanium (91594)
3x14mm (89208)Aluminum (8567)Titanium (91595)
3x18mm (89209)Titanium (91597)
4x10mm (81262)
Flat Head (fhcs) Ball Bearings
5x8x2.5mm (31400)
5x11x4mm (25710)
10x15x4 (91563)
8x16x5 (91564)
Plain M3 Nut (91477)M3 Alum. Locknut, Blue (31550)
M3 Locknut, Black (25215)
M4 Locknuts: Serrated Steel (Silver)(91826) FT Aluminum (Blue) (31551)
Serrated Aluminum (Black) (91738)
Nuts (lock/plain)
2.5x6mm (41079)
Socket Head (shcs)
2.5x5mm (31519)
2.5x6mm (31520)
3x4mm (91158)
3x6mm (31531)
3x8mm (31532)
3x10mm (25211)Aluminum (8554)Titanium (91582)
3x12mm (89202)Titanium (91583)
3x14mm (25187)Titanium (91584)
3x16mm (89203)Titanium (91585)
3x18mm (2308)
3x20mm (25188)Titanium (91587)
3x22mm (25189)Titanium (91588)
4x10mm (89206)
Button Head (bhcs)
5.5x0.5mm (31381)
5.5x1.0mm (31382)
5.5x2.0mm (31383)
3x8mm Washer (89218)
Shims and Washers
4
:: :: Quick Start GuideQuick Start Guide
:: :: Quick Start GuideQuick Start Guide - (cont.) - (cont.)
:: :: Quick Start GuideQuick Start Guide - (cont.) - (cont.)
Battery Charging Steps and Safety:
Remove the battery from the vehicle before charging. Place battery on a fire resistant surface.Avoid any contact with water or other liquids. Be sure to select the correct charging mode for the type of battery you are charging.
ALWAYS use a compatible charger for charging your batteries.
Caution: Never leave the battery unattended while charging. Always disconnect the charger from the power source when finished charging.
Caution: Always disconnect the battery when you are finished driving the vehicle.
Battery Installation:
1. Install the battery with the battery wires directed towards the rear of the vehicle.
2. Secure the battery strap using two hook and loop straps.
Peak Detection Quick Charger
1 2
Battery Notes and Tip:
Connect the battery as shown. Disconnect the battery when not in use!
LiPo: LiPo batteries (lithium polymer) are high current rechargeable batteries. LiPo batteries offer extended run time and peak performance over NiMH batteries. They require a peak detection charger designed specifically for LiPo batteries. These batteries require special care and handling. LiPo batteries are recommended for advanced users only!ALWAYS charge a LiPo battery in LiPo mode.
512/20
:: :: Quick Start GuideQuick Start Guide - (cont.) - (cont.)
:: :: Quick Start GuideQuick Start Guide - (cont.) - (cont.)
Radio System Tuning and Controls:
RULE: Transmitter on First/Vehicle on Second, Vehicle off First/ Transmitter off Last!
1) Slide the battery cover to remove cover. 2) Install alkaline or rechargeable AA size batteries into the battery holder. 3) Slide the battery cover back into place making sure it is completely closed and secure. 4) Turn the power ON. If the power indicator LED fails to light, check the batteries for insufficient contact or incorrect polarity.
On/Off Switch
Radio System Tuning and Controls:
DO NOT hold the trigger when turning on the radio.
Refer to Radio owners manual for more in-depth instructions on radio operation and functions.
Throttle set to Neutral!
Neutral
Push trigger for Brake
Pull trigger for Throttle
Adjust steering trim so front wheels point
straight. Install body and body clips.Ready to go!
:: :: Step 3Step 3
:: :: Step 2Step 2
6
:: :: Step 1Step 125810
Sun Gear Shim
25810Sun Gear
Shim25810
Sun Gear25810Diff
O-Ring
25810Diff
O-Ring 25810Input Pin
25810Sun Gear
25810Input Pin
313502.5x10mm
FHCS
9156310x15x4mm
Bearing
25808Diff Gasket
25812Sun Gear
Shim
25812Sun Gear
Shim
25812Input Pin
25812Input Pin
25812Center Diff Sun Gear
25812Center Diff Sun Gear
25811Spur Gear (54T, 32P)
25807Diff Case (Center)
25812Diff
O-Ring
25812Center Diff
Shaft25812
Center Diff Outdrive
915648x16x5mm
Bearing
25810Planetary
Gear
25810Diff Cross
Pin
25810Diff Output
Shaft
25810Diff Output
Shaft
25807Diff Case
(Front/Rear)
25808Ring Gear,
37T
x4x4
x2x2
x2x2
x4x4
x4x425810Planetary Gear Shim
25812Diff O-Ring
diff
fluid
Front Diff Fluid:60k cst #5458
Rear Diff Fluid:3k cst #5452
Build 2 (1 front, 1 rear)
Build 1 (1 center)
:: :: Step 6Step 6
:: :: Step 5Step 5
7
:: :: Step 4Step 4
Some residual shock fluid may appear
around the shock cap after the first few runs as a result of
bleeding.
Leave a gap when installing the
shock cap.
Compress shock shaft half way.Let shock fluid bleed from cap,
then tighten cap.
For less rebound, compress shock shaft farther before tightening the shock cap.
For more rebound, do not compress shock shaft as far
before tightening the shock cap.
!
! !shock fluid
Front Shock Fluid:40wt #5423
Rear Shock Fluid:40wt #5423
Some residual shock
around the shock cap before tightening the shock cap.
x2x2
x2x2
25831E-Clip, 2.5mm
25831Shock
O-Ring
25831Shock Seal Bushing
25825Shock Bottom
Cap
25825Shock Cap
25831Shock
Bladder
25825Shock Body
25825Shock Piston
25826Shock Shaft
(Front - Short)(Rear - Long)
25812Center Diff Cross Pin
25812PLanetary Gear Shim
25812Center Diff Planetary
Gear
25811Center Diff
Gasket25812
Input Shaft Spline
314482.5x8mm
FHCS
25828Pivot Ball,
Long
25825Shock Eyelet
25825Uptravel Spacer
892083x14mm
FHCS
x4x4
x2x2
x4x4
x4x4
diff
fluid
Center Diff Fluid:100k cst #5459
8
:: :: Step 9Step 9
:: :: Step 8Step 8
:: :: Step 7Step 7
x2x2
x2x2
x2x2
251873x14mm
BHCS
314005x8x2.5mm
Bearing
258052.6mmWasher
25809Input Pinion,
Grooved
25806Gearbox,
Front
25805Servo Saver
Spring Collar
25825Spring Cup
x2x2
x2x2
x2x2
x2x2
x2x2
25819Steering Block Hat Bushing
25215M3 Locknut
410792.5x6mm
SHCS
892023x12mm
BHCS
25802Arm Mount
Insert
25802Arm Mount
25809Outdrive
Shaft915648x16x5mm
Bearing
2584310x15x4mm
Bearing
25801Skid Plate,
Front
313502.5x10mm
FHCS
25805Servo
Saver Tube
25805Upper Servo Saver Arm
25805Lower Servo Saver Arm
25805Servo Saver
Spring
25805Steering
Rack
25805Bellcrank
Arm
25825Spring Collar
25832Shock Spring
x2x2 x2x2252033x12mm
FHCS
812624x10mm
FHCS
2.5mm
9
:: :: Step 122
:: :: Step 1Step 111
:: :: Step 10Step 10
x2x2
x2x2
x4x4
x2x2
x2x2
x2x2 x2x2x2x2
x2x2
25819Caster Block Hat Bushing
25819Hat
Bushing25818
Steering Block
25821Pin Screw
25821Slider Drive Shaft, Male
892023x12mm
BHCS
252113x10mm
BHCS
252113x10mm
BHCS
25818Caster Block
892023x12mm
BHCS
25804Front Arm
25816Front Shock
Tower
25817Body
Mount
25817Body Post
6332Body Clip
252113x10mm
BHCS
25803Inner
Hinge Pin
25802Arm Mount
Insert
25802Arm Mount
25806Gearbox
Cap
10
:: :: Step 1Step 155
:: :: Step 1Step 144
:: :: Step 1Step 133
1mm25215
M3 Locknut
25803Outer Hinge
Pin
257105x11x4mm
Bearing
258202x9.8mm
Pin
25821Slider Drive
Shaft, Female
9156310x15x4mm
Bearing25820
12mm Hex
1mm
x2x225835Anti-Roll Bar
Eyelet
812583x12mmSet Screw
25835Anti-Roll Bar, Front
25835Anti-Roll Bar Pivot
Ball
252253x3mm
Set Screw
11
:: :: Step 18Step 18
:: :: Step 17Step 17
:: :: Step 16Step 16
Build x2 (right and left side)
Build x2 (right and left side)
15.50mm
22.00mm
Steering Turnbuckle
Steering Turnbuckle
x2x2
x2x2
x2x2
25824Ball Cup
25824Ball Cup
25824Turnbuckle
25824Turnbuckle
25828Pivot Ball,
Long
892033x16mm
BHCS
251873x14mm
BHCS
251893x22mm
BHCS
25215M3 Locknut
251873x14mm
BHCS
x2x225828Pivot Ball,
Long
25815Motor Mount 25815
Motor Mount Pivot Screw
911583x4mmBHCS
25815Motor Mount
Nut
25852Chassis
315192.5x5mm
BHCS
25800Spur Gear
Cover
12
:: :: Step 21Step 21
:: :: Step 20Step 20
:: :: Step 19Step 19
x2x2892023x12mm
BHCS
25806Gearbox
Cap
25809Input Pinion
915648x16x5mm
Bearing
2584312x18x4mm
Bearing
25806Gearbox,
Rear
x2x2315202.5x6mm
BHCS
25856Drive Shaft
x2x2x2x2
x2x2
x4x425852Chassis Guard
252113x10mm
BHCS
892074x12mm
BHCS
25852Drive Shaft
Cover
252113x10mm
BHCS
13
:: :: Step 24Step 24
:: :: Step 23
:: :: Step 22Step 2225802
Arm Mount
25803Inner Hinge
Pin
251873x14mm
BHCS
6332Body Clip
258202x9.8mm
Pin
2582012mm Hex
25821Pin Screw
25821Slider Drive
Shaft, Female25818
Rear Hub
25817Body Post
25817Body Mount
25804Rear Arm
252113x10mm
BHCS
x2x2
x2x2
x2x2
x2x2
x2x2
x2x2
x2x2
x2x2
25802Arm Mount
Insert
892033x16mm
BHCS
252113x10mm
BHCS
257105x11x4mm
Bearing
25821Slider Drive Shaft, Male
9156310x15x4mm
Bearing
25816Rear Shock
Tower
25802Arm Mount
Insert
25802Arm Mount
14
:: :: Step 27Step 27
:: :: Step 26Step 26
:: :: Step 25
Build x2 (right and left side)
26.00mmRear Camber Turnbuckle
x2x2
x2x2
x2x2
x2x2
25824Ball Cup
25824Turnbuckle
25828Pivot Ball,
Long
25215M3 Locknut
911583x4mmBHCS
x2x225835Anti-Roll Bar
Eyelet
812583x12mmSet Screw
25835Anti-Roll Bar, Rear
25835Anti-Roll Bar Pivot
Ball
252253x3mm
Set Screw
251893x22BHCS
23083x18mm
BHCS
1mm
25215M3 Locknut
25803Outer Hinge
Pin
:: :: Step 29
:: :: Step 30Step 30
15
:: :: Step 28Step 28
x2x2892023x12mm
BHCS
x2x2892093x18mm
FHCS
892023x12mm
BHCS
x2x2314482.5x8mm
FHCS
25853Front
Bumper
25853Front
Bumper Brace
x2x2
x2x2
23083x18mm
BHCS
25853Front Light Bucket Cap
25855Front LED
25804ShockGuard
23083x18mm
BHCS
252113x10mm
BHCS
251883x20mm
BHCS
25827Pivot Ball,
Small
25825Shock Spacer
25804Shock Guard
23083x18mm
BHCS
252113x10mm
BHCS
251883x20mm
BHCS
25827Pivot Ball,
Small
x2x2
x2x2
x2x2
892074x12mm
BHCS
252033x12mm
FHCS
812624x10mm
FHCS
25801Skid Plate
x2x2
x2x2
315202.5x6BHCS
892064x10mm
BHCS
16
:: :: Step 33Step 33
:: :: Step 31Step 31
:: :: Step 32Step 32
x2x271050Hook and
Loop Straps
25800Wire Clip
x2x2315413x6mm
FHCS
315313x6mmBHCS
25800Receiver
Box
x2x2892093x18mm
FHCS
x2x2
x2x2
x2x2
x4x4
315202.5x6mm
BHCS
25855Rear Led
Lights
25854Rear Bumper
Brace
25854Mud Flaps
315323x8mm BHCS
x4x4
x2x2
25854Rear
Bumper
25854Rear Lower
Bumper
25854Mud Flap
Plate
252113x10mm
BHCS
252113x10mm
BHCS
251873x14mm
BHCS
x2x225852Battery Spacer Foam
17
:: :: Step 34
:: :: Step 35Step 35
:: :: Step 36Step 36
Set The Gear Mesh:
To set the gear mesh, rock the spur gear back and forth without making the pinion gear move. Exessive amounts of spur gear movement (loose gear mesh) will cause premature gear failure. If the spur gear mesh is tight, there will be no movement between the spur and pinion gears. A gear mesh that is too tight or too loose will reduce power and damage the gear teeth.
25815Motor Mount
Tension Spring
251883x20mm
BHCS
x2x2315323x8mm
FHCS
25815Motor
Mount Plate
252253x3mm
Set Screw
2586115T-32P Pinion
Motor
25800Spur Gear
Cover
x4x4315323x8mmBHCS
252113x10mm
BHCS
Servo
18
:: :: Step 37Step 37
:: :: Step 38Step 38
:: :: Step 39Step 39
0.80mmServo Link Turnbuckle
x2x2
x2x2
25824Ball Cup
258244x12mm Set Screw
25827Pivot Ball,
Short
Carefully apply ca glue (tire adhesive) to the tire bead on the side. Do one side at a time, allowing it to dry before gluing the
other side!CA glue not included!
!#1597
ca glue
Build 4
25860Pro SC10
Tire
25860Pro SC10
Insert
25860Pro SC10
Wheel
x2x289202M3x12mm
BHCS
31532M3x8mm
BHCS25805
Servo Arm, 25T
Battery
ESC6338
Antenna Tube, 12”
25225M3x3mm Set Screw
Receiver
6727Servo Tape
19
:: :: Step 40Step 40
:: :: Step 41Step 41
Install 4
x4x4x3x3
x2x2
6332Body Clip
315323x8mmBHCS
91738M4 Black
Nut Serrated Aluminum
25858SC10 Body,
Painted
x3x391477Nuts, M3,
Black
20
:: Tuning Tips:: Tuning Tips
Rear Camber:
Camber describes the angle at which the tire and wheel rides when looked at from the back. Negative camber means that the tire leans inward at the top. A good starting camber setting is -1°. Adding a small amount of positive camber, where the top of the tire is leaning out, will tend to improve straight-line acceleration on loose tracks.Optional #1719 camber gauge can be used to more accurately set camber.
Front Camber:
Camber describes the angle at which the tire and wheel rides when looked at from the front. Negative camber means that the tire leans inward at the top. A good starting camber setting is -1°. Positive camber, where the top of the tire is leaning out, is not recommended. Optional #1719 camber gauge can be used to more accurately set camber.
Front Camber Links:
Changing the length of the camber link is considered a bigger step than adjusting the ball end height on the tower. Shortening the camber link (or lowering the ball end) will give the front end less roll and quicken steering response. Lengthening the camber link (or raising the ball end) will give the front more roll and slower steering response. Longer camber links are typically used on high grip tracks and shorter links tend to work better on medium-grip loose tracks.
Ackermann:
Ackermann is the angle difference between the front wheels when they are turned to steer the car. For minimal tire slip, it is standard for the inside wheel to steer to a greater angle than the outside wheel. If corner entry steering is too aggressive, try increasing the Ackermann by moving the ball studs to the rearward holes. Increasing the Ackermann will increase the angle difference of the front wheels when steered, resulting in a more stable car on corner entry.
Rear Camber Link:
Changing the length of the camber link is considered a bigger step than adjusting the ball end height on the rear chassis brace. Shortening the camber link (or lowering the ball end) will give the rear end less roll and the car will tend to accelerate or “square up” better. Lengthening the camber link (or raising the ball end) will give the rear more roll and more cornering grip. Longer camber links are typically used on high grip tracks, while shorter links tend to work better on medium grip loose tracks. The kit setting is the best compromise of cornering grip and acceleration.
Set The Gear Mesh:
You should be able to rock the spur gear back and forth in the teeth of the pinion gear without making the pinion gear move. If the spur gear mesh is tight, then loosen the #25188 screw and move the motor away, then try again. A gear mesh that is too tight or too loose will reduce power and damage the gear teeth.
Tips for Beginners:Before making any changes to the standard setup, make sure you can get around the track without crashing. Changes to your vehicle will not be beneficial if you can’t stay on the track. Your goal is consistent laps. Once you can get around the track consistently, start tuning your vehicle. Make only ONE adjustment at a time, testing it before making another change. If the result of your adjustment is a faster lap, mark the change on the included setup sheet (make adddtional copies of the sheet before writing on it). If your adjustment results in a slower lap, revert back to the previous setup and try another change. When you are satisfied with your vehicle, fill in the setup sheet thoroughly and file it away. Use this as a guide for future track days or conditions. Periodically check all moving suspension parts. Suspension components must be kept clean and move freely without binding to prevent poor and/or inconsistent handling.
:: Shocks:: Shocks
:: Gear Differentials:: Gear Differentials
2582525826258272583125832
25807258082581025811258123135031448892089156391564
12ea.101
2ea.
1111110101044
Rival MT10 Shock SetRival MT10 Shock Shaft SetPivot Balls, ShortRival MT10 Shock Rebuild KitRival MT10 Shock Spring Set
Rival MT10 Differential CasesRival MT10 Ring Gear, 37TRival MT10 Front & Rear Diff Rebuild KitRival MT10 Spur Gear, 54T - 32PRival MT10 Center Diff Rebuild KitM2.5x10mm FHCSM2.5x8mm FHCSM3x14mm FHCSFT Bearings, 10x15x4mmFT Bearings, 8x16x5mm
21
:: Shock Fluid:: Shock Fluid5420542754215424542854265422543254295433542354345430543854355431543654375425
2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.
10 Weight Silicone Shock Fluid15 Weight Silicone Shock Fluid20 Weight Silicone Shock Fluid22.5 Weight Silicone Shock Fluid25 Weight Silicone Shock Fluid27.5 Weight Silicone Shock Fluid30 Weight Silicone Shock Fluid32.5 Weight Silicone Shock Fluid35 Weight Silicone Shock Fluid37.5 Weight Silicone Shock Fluid40 Weight Silicone Shock Fluid42.5 Weight Silicone Shock Fluid45 Weight Silicone Shock Fluid47.5 Weight Silicone Shock Fluid50 Weight Silicone Shock Fluid55 Weight Silicone Shock Fluid60 Weight Silicone Shock Fluid70 Weight Silicone Shock Fluid80 Weight Silicone Shock Fluid
:: Diff Fluid:: Diff Fluid545154525444545354465454545554565457545854485459546154635465
111111111111111
Silicone Diff Fluid 2,000CSTSilicone Diff Fluid 3,000CSTSilicone Diff Fluid 4,000CSTSilicone Diff Fluid 5,000CSTSilicone Diff Fluid 6,000CSTSilicone Diff Fluid 7,000CSTSilicone Diff Fluid 10,000CSTSilicone Diff Fluid 20,000CSTSilicone Diff Fluid 30,000CSTSilicone Diff Fluid 60,000CSTSilicone Diff Fluid 80,000CSTSilicone Diff Fluid 100,000CSTSilicone Diff Fluid 200,000CSTSilicone Diff Fluid 500,000CSTSilicone Diff Fluid 1,000,000CST
Front/RearCenter
25825
25825
25832
25825
25825
25825
25810
25810
25812
25812
2581225812
25812
25812
25812
25812
25812
25811
2581231448
25810
25810
25810
25810
25810
25810
25810
25810
25808
25807
25807
25808
89208
25812
25811
31350
91563
91564
91563
25825
25827
Center Diff25812
Front/Rear Diff25810
25825
25826
25831
25831
25825
25831
25831
25831
25831
22
:: Front Bumpers:: Front Bumpers
:: Rear Bumpers:: Rear Bumpers
230825853258553144889202
1011
1010
M3x18mm BHCSPro4 SC10 Front BumperPro4 SC10 LED Light KitM2.5x8mm FHCSM3x12mm BHCS
2308
2585525853
25853
25853
25853
8920289202
31448
31448
2308 89202
25211
25211
2521125211
25211
25187
89209
89209
31520
31520
3153231532
31532
31532
25854
25854
25854
25854
25854
25854
25854
252112518725854258553152031532
101011
1010
M3x10mm BHCSM3x14mm BHCSPro4 SC10 Rear BumperPro4 SC10 LED Light KitM2.5x6mm BHCSM3x8mm BHCS
:: Steering Bellcrank:: Steering Bellcrank
:: Front Bulkhead:: Front Bulkhead
252152580525819314004107989202
251872520325211258012580531532812628920289209
10114
1010
10101011
10101010
M3 LocknutRival MT10 Steering Bellcrank SetRival MT10 Hat Bushing Set5x8x2.5mm BearingM2.5x6mm SHCSM3x12mm BHCS
M3x14mm BHCSM3x12mm FHCSM3x10mm BHCSRival MT10 Skid PlatesRival MT10 Steering Bellcrank SetM3x8mm BHCSM4x10mm FHCSM3x12mm BHCSM3x18mm FHCS
23
25819
25819
25215
31400
31400
31400
31400
25215
25187
25187
25187
25187
25805
25801
25211
3153289202
25211
81262
81262
25203
25203
89209
89209
25805
25805
25805
25805
25805
25805
25805
8920225805
41079
41079
25805
24
:: Front Gearbox:: Front Gearbox
:: Rear Gearbox:: Rear Gearbox
252112580225803258062580931350892029156391564
252032521125801258022580325806258093152081262892028920389206911589156391564
101111101044
101011111
10101010101044
M3x10mm BHCSRival MT10 Arm MountsRoval MT10 Hinge Pin SetRival MT10 Front & Rear GearboxesRival MT10 Oudrive Shaft & Pinion SetM2.5x10mm FHCSM3x12mm BHCSFT 10x15x4mm BearingFT 8x16x5mm Bearing
M3x12mm FHCSM3x10mm BHCSRival MT10 Skid PlatesRival MT10 Arm MountsRoval MT10 Hinge Pin SetRival MT10 Front & Rear GearboxesRival MT10 Oudrive Shaft & Pinion SetM2.5x6mm BHCSM4x10mm FHCSM3x12mm BHCSM3x16mm BHCSM4x10mm BHCSM3x4mm BHCSFT 10x15x4mm BearingFT 8x16x5mm Bearings
89202
8920289202
25806
25806
25809
25802
25802
25802
25802
25802
89203
25801
89206
31520 89206
25203
81262
81262
25802
25803
25803
89202
25211
89202 91158
25806
25806
25809
25809
91564
91564
91563
91563
31350
25802
25802
25802
25802
25802
25803
25803
25802
89202
25211
25211
89202
89202
25
:: Front Arm:: Front Arm
:: Rear Arm:: Rear Arm230825211252152571025803258042581825820258219156391738
1010102111414
10
M3x18mm BHCSM3x10mm BHCSM3 Locknut5x11x4mm BearingsRival MT10 Hinge Pin SetRival MT10 Suspension Arm SetRival MT10 Caster & Steering Block SetRival MT10 12mm Wheel HexesRival MT10 Drive Shaft SetFT 10x15x4mm BearingsM4 Black Nut, Serrated Aluminum
230825187252112521525710258032580425818258192582025821892039156391738
101010102111141
104
10
M3x18mm BHCSM3x14mm BHCSM3x10mm BHCSM3 Locknut5x11x4mm BearingsRival MT10 Hinge Pin SetRival MT10 Suspension Arm SetRival MT10 Caster & Steering Block SetRival MT10 Hat Bushing SetRival MT10 12mm Wheel HexesRival MT10 Drive Shaft SetM3x16mm BHCSFT 10x15x4mm BearingsM4 Black Nut, Serrated Aluminum
25821
25187
25818
25820
25820
25215
25215
25804
25804
25211
2308
25803
258182308
25821
25821
25821
25710
25710
91738
91148
91563
91563
25821
25821
25804
25804
25211
2308
25803
25215
25211
25818
25819 25819
25819
89203
25211
26
:: Rear Shock Tower:: Rear Shock Tower
:: Front Shock Tower:: Front Shock Tower63322518825189252112521525816258172582789202
101010101011
1010
Body ClipsM3x20mm BHCSM3x22mm BHCSM3x10mm BHCSM3 LocknutRival MT10 Shock Tower SetRival MT10 Body Mount SetRival MT10 Pivot Balls, ShortM3x12mm BHCS
25817
25817
25817
25817
25817
25817
6332
6332
6332
6332
63326332
6332
25215
25215
25187
25816
25825
25825
25188
2518825211
25189
25189
25827
25827
25215
25816
25827
2582725188
25188
25211
25211
25189
25189
89202
25215
6332
6332251872518825189252112521525816258172582725825
10101010101011
101
Body ClipsM3x14mm BHCSM3x20mm BHCSM3x22mm BHCSM3x10mm BHCSM3 LocknutRival MT10 Shock Tower SetRival MT10 Body Mount SetRival MT10 Pivot Balls, ShortRival MT10 Shock Set
:: Chassis:: Chassis
:: Turnbuckles / Swaybars / :: Turnbuckles / Swaybars / Wheels / TiresWheels / Tires
6332633825188252112522525815258522585625861315003151931520315313153231541710508920791158
2522525824258272582825835258582586081258
101101011210
Body ClipsAntenna Tube, 12”M3x20mm BHCSM3x10mm BHCSM3x3mm Set ScrewRival MT10 Motor Mount SetPro4 SC10 Chassis, Guards, Cover, FoamPro4 SC10 Center Drive Shaft15T-32P Pinion GearM3x2.5mm Set ScrewM2.5x5mm BHCSM2.5x6mm BHCSM3x6mm BHCSM3x8mm BHCSM3x6mm FHCSHook and Loop StrapsM4x12mm BHCSM3x4mm BHCS
M3x3mm Set ScrewRival MT10 Turnbuckle SetRival MT10 Pivot Balls, ShortRival MT10 Pivot Balls, LongRival MT10 Front Anti-Roll Bar SetPro4 SC10 Body, PaintedPro4 SC10 Off Road Tires & Method Wheels, MountedM3x12mm Set Screw
27
31500
25861
25835
25835
25225
25835
25828
25824 25824 25824
2582425824
25824
25828
2582725827
25860
25860
25860
25835
81258
25835
25835
25225
25835
25835
81258
101
1010101111
1010101010102
1010
2582725827
25828 25828
25860
25860
25860
101010
101010101010
1010
25800
6332
31541
6338
25225
25800
25800
25852
25211
25852
25852
25852
25852
71050
71050
25856
31520
89207
25211
31531
31519
91158
25815
2581525815
25188
31532
2585289207
25211
25211
2521131532
28
:: Reedy Batteries:: Reedy Batteries302751752753755758759
2731327315
111111111
AA Alkaline 1.5V (4)Wolfpack LiPo 3300mAh 30C 7.4V w/T-PlugWolfpack LiPo 4000mAh 35C 7.4V w/T-PlugWolfpack LiPo 5400mAh 35C 7.4V w/T-PlugWolfpack LiPo 4500mAh 35C 11.1V w/T-PlugWolfpack LiPo 3000mAh 30C 7.4V w/T-PlugWolfpack LiPo 3000mAh 30C 11.1V w/T-Plug LiPo Pro TX/RX 2400mAh 7.4V FlatLiFe Pro TX/RX 1600mAh 6.6V Flat
:: Reedy Chargers / Accessories:: Reedy Chargers / Accessories
27200
2720127201C227201C2272022722027221272222722327224
647648650747790791
1
111111111
111111
CHARGERS1216-C2 Dual AC/DC Competition Battery Charger324-S AC LiPo/LiFe Compact Balance Charger324-S Charger w/3300mAh 7.4V LiPo Battery324-S Charger w/4500mAh 11.1V LiPo Battery123-S AC LiPo Compact Balance Charger7-in-1 Universal Charge Lead (4mm)T-plug Charge Lead (4mm)XH 2-6S Balance Board (4mm)RX Charger Lead FUT (4mm)US to IEC 320 C5 angle 1M AC Power Cord
ACCESSORIESSilicone Wire 12AWG-Black (1m)Silicone Wire 14AWG-Black (1m)Shrink Tubing - 15pcs 4.5mm x 20mmSilicone Wire 12AWG-Black (30m)Silicone Wire 13AWG-Black (1m)Silicone Wire 13AWG-Black (30m)
:: Lubes & Adhesives / Decals / Misc.:: Lubes & Adhesives / Decals / Misc.1105159615976588659166366727
7263840
1111112
11
FT Green Slime Shock LubeFT Locking AdhesiveFT Tire AdhesiveBlack Grease - 4ccS.Diff Lube - 4ccSilicone Grease - 4ccServo Tape
Reedy 2016 Sticker Set2016 Team Associated Decal Sheet
:: MyLaps Transponders:: MyLaps TranspondersMLP10R120MLP10R147MLP40R222
111
MyLaps RC4 (3-wire) TransponderMyLaps RC4 (3 wire) Transponder, blackMyLaps Transponder Holder
:: XP/AE Electronics:: XP/AE Electronics292032920429257
111
AE XP120 2.4GHz 2CH Radio SystemAE XP-R4 2.4GHz 4CH ReceiverAE XP130 2.4GHz 3CH Radio System
:: Reedy Electronics:: Reedy Electronics
271002710127102271032710527111271142711527130271352713627139
907
29180291842918529186
111111111111
1
1111
SERVOS AND SERVO ACCESSORIESRS1206 Digital HV Hi-Speed Competition ServoRT1508 Digital HV Hi-Torque Competition ServoRS1206 Servo Case Set w/screwsRS1206 Servo Gear SetRT1508 Servo Gear Set1514MG Digital RTR ServoRT2406 Digital HV Brushless Competition ServoRT2706A Digital HV Alum. Brushless Comp. Servo1514MG Servo Gear SetRT2406 Gear SetRT2706A Gear SetRT2406 Case Set
SPORTS MOTOR540-SL4 3300kV 4-pole Sensorless Brushless Motor
ELECTRONIC SPEED CONTROLSSC800-BL ESCSC800-BL/SC1000-BL/SC1000-DB/SC600-BL SwitchSC600-BL Brushless ESCSC600-BL Fan
29
:: Tools:: Tools1111111211141449145214981499150015011502150315041505150615071508151815191522154515551568156915701571157916571658165916601661166216631664166516661667166816691670167116721674
167516791719173737183987
1111111111111111111111111111111111111111111
1111
121
FT Turnbuckle WrenchFT 4mm Turnbuckle WrenchFT Dual Turnbuckle WrenchOff Road Ride Height GaugeFT TC Ride Height GaugeFT Universal Tire BalancerFT Body ReamerFT 1.5mm Hex DriverFT 2.0mm Hex DriverFT 2.0mm Ball Hex DriverFT 2.5mm Hex DriverFT 2.5mm Ball Hex DriverFT 3.0mm Hex DriverFT 5.0mm Hex DriverFT 5.5mm Nut DriverFT 7.0mm Nut DriverFT Hex Driver Tool Set, 3pc (1.5, 2.0, 2.5)FT Hex/Nut Driver Tool Set, 5pc.FT Professional Mini Digital ScaleFT 5/64” Blue Hex DriverFT Clutch Gauge, 4 ShoeFT 5.5mm Short Nut DriverFT 7mm Nut Driver, T-HandleFT 5.5mm Short Nut DriverFT 1:8 Wheel Nut Wrench, 17mm HexFT Ball Cup WrenchFT 1/4” Hex Drive .050” TipFT 1/4” Hex Drive 1/16” TipFT 1/4” Hex Drive 5/64” - 2.0mm TipFT 1/4” Hex Drive 3/32” TipFT 1/4” Hex Drive 1.5mm TipFT 1/4” Hex Drive 2.5mm TipFT 1/4” Hex Drive 3/16” Nut Driver TipFT 1/4” Hex Drive 1/4” Nut Driver TipFT 1/4” Hex Drive 11/32” Nut Driver TipFT 1/4” Hex Drive 5.5mm Nut Driver TipFT 1/4” Hex Drive 7.0mm Nut Driver TipFT 1/4” Hex Drive 8.0mm Nut Driver TipFT 1/4” Hex Drive 5/64” - 2.0mm Ball End TipFT 1/4” Hex Drive 3/32” Ball End TipFT 1/4” Hex Drive Standard Screwdriver TipFT 1/4” Hex Drive Phillips Screwdriver TipFT 1/4” 5 Piece Power Tool Tips Set (5/64-2.0mm, 1.5mm, 2.5mm, 5/64”- 2.0mm ball, 2.5mm ball)FT Shock Shaft PliersFT T-Handle Ratchet DriverFT Camber + Track Width ToolFT Body Scissors12 Inch Nylon Wire TiesFT Droop Gauge
:: Apparel :: Apparel / Promotional/ Promotional
SP124*SP126*SP128*SP129*SP143*SP200*SP201*
SP125*SP127*SP231*SP142*SP160*
SP20SP260SP261SP430SP431SP432SP434SP435
SP115SP116SP117SP118SP300SP301SP302SP303SP304SP305SP425
1111111
111111
11111111
11111111111
TEE SHIRTSAE 2017 Worlds Tee, Black (S, M, L, XL-5XL)Team Associated Tri T-Shirt, Black, (S, M, L, XL-5XL)Team Associated Womens Tri T-Shirt, Black, (S, M, L)Team Associated Youth Tri T-Shirt, Black, (S, M, L)Reedy W19 T-Shirt, Black, (S, M, L, XL-3XL)Element RC Logo T-Shirt, Gray, (S, M, L, XL-5XL)Element RC Rhombus T-Shirt, Black, (S, M, L, XL-5XL)
HOODIES/JACKETSAE 2017 Worlds Pullover, Black, (S, M, L, XL-3XL)Team Associated Tri Zip-Up, Black, (S, M, L, XL-3XL)Element RC Logo Pullover, Black, (S, M, L, XL-5XL)Reedy W19 Pullover, Black, (S, M, L, XL-3XL)Factory Team Logo Lightweight “Medal” Zip Up Streaked, Black, (S, M, L, XL-4XL)
HATSAE Patch Trucker HatElement RC Hat, Curved Bill, BlackElement RC Hat, Flat Bill, BlackReedy Trucker Hat 2018Team Associated Tri Trucker Hat, Flat Bill, BlackTeam Associated Tri Trucker Hat, Curved Bill, BlackFactory Team Logo Trucker Hat, Flat BillFactory Team Logo Trucker Hat, Curved Bill
BANNERS/MATS CARRIERSReedy Circuit Cloth BannerReedy Power Vinyl Banner, 48x24Reedy power Cloth Banner, 96x24Reedy Power Cloth Banner, 48x24Team Associated Vinyl Banner, 48x24Factory Team Vinyl Banner, 48x24Team Associated Cloth Banner, 96x24Team Associated Cloth Banner, 48x24Factory Team Cloth Banner, 96x24Factory Team Cloth Banner, 48x24FT Fluid Carrier
* Use part number plus the desired size when ordering!