Pro4 Manual.indd - Associated Electrics

Associa

tedEle

ctric

s.c

om

2

:: Introduction:: Introduction

:: Pro4 SC10 RTR Features:: Pro4 SC10 RTR Features

:: Additional:: Additional

:: Other Helpful Items:: Other Helpful Items

Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new vehicle. Please take a moment to read through the manual and familiarize yourself with the steps.We are continually changing and improving our designs; therefore, actual parts may appear slightly different than the illustrations. New parts will be noted on supplementary sheets located in the appropriate parts bags. Check each bag for these sheets before you start to build.

• 2.4GHz 2-channel radio system• High-Torque Digital Servo with spring-style servo saver• Powerful Reedy 3300kV Brushless Motor• Water-resistant high-power Reedy brushless speed control with T-plug connector and LiPo low-voltage cutoff• Three sealed gear differentials• Fifteen52 Turbomac HD wheels • Threaded Oil-filled coil over shock absorbers• 4mm heavy-duty adjustable alloy steel turnbuckles• Durable slider type drive shafts• Factory-finished Contender short course body• High-grip General Tire GT(R) Grabbers all terrain tires • Steel center drive shaft• Four-wheel independent suspension• Durable, impact-absorbing front and rear bumpers with LEDs

Associated Electrics, Inc.21062 Bake Pkwy.

Lake Forest, CA 92630

http://www.RC10.com · http://twitter.com/Team_Associated · http://www.instagram.com/teamassociatedrc/ · http://www.facebook.com/TeamAssociated/

Customer ServiceTel: 949.544.7500Fax: 949.544.7501

Your new Pro4 SC10 comes assembled. The following items are needed for completion. • 6-cell NiMh or 2-3s LiPo battery • Suitable battery charger • (4) AA batteries

Tools included: • 1.5mm, 2.0mm, 2.5mm Wrenches

• Silicone Shock Fluid (Refer to catalog for complete listings) • Silicone Diff Fluid (Refer to catalog for complete listings)• Body Scissors (AE Part # 1737) • Reamer / Hole Punch (#1499) • Shock Pliers (#1675) • Wire Cutters• FT Hex/Nut Wrenches (AE Part # 1650)• Needle Nose Pliers • Hobby Knife • Soldering Iron • Calipers or a Precision Ruler • Green Slime shock lube (AE Part # 1105)• FT Turnbuckle Wrench (#1114) • FT Universal Tire Balancer (#1498)

:: Table of Contents:: Table of Contents1................... Cover

2................... Introduction 3...................1:1 Hardware “Fold Out”

4 - 5............. Quick Start Guide

6 - 19............Steps 1- 41

20.................Tuning Tips

21 - 29....... Catalog/Notes

30................ Back Cover

:: Notes:: Notes

This symbol indicates a special note or instruction in the manual.!

There is a 1:1 hardware foldout page in the front of the manual. To check the size of a part, line up your hardware with the correct drawing until you find the exact size. Each part in the foldout has a number assigned to it for ordering replacement parts.

3

:: Hardware - 1:1 Scale View:: Hardware - 1:1 Scale View

3x3mm (25225)

3x12mm (81258)

4x12mm (25824)

Set Screws

Notes:

2.5x8mm (31448)

2.5x10mm (31350)

3x6mm (31541)

3x12mm (25203)Aluminum (8556)Titanium (91594)


3x18mm (89209)Titanium (91597)

4x10mm (81262)

Flat Head (fhcs) Ball Bearings

5x8x2.5mm (31400)

5x11x4mm (25710)

10x15x4 (91563)

8x16x5 (91564)

Plain M3 Nut (91477)M3 Alum. Locknut, Blue (31550)

M3 Locknut, Black (25215)

M4 Locknuts: Serrated Steel (Silver)(91826) FT Aluminum (Blue) (31551)

Serrated Aluminum (Black) (91738)

Nuts (lock/plain)

2.5x6mm (41079)

Socket Head (shcs)

2.5x5mm (31519)

2.5x6mm (31520)

3x4mm (91158)

3x6mm (31531)

3x8mm (31532)


3x12mm (89202)Titanium (91583)

3x14mm (25187)Titanium (91584)

3x16mm (89203)Titanium (91585)

3x18mm (2308)

3x20mm (25188)Titanium (91587)

3x22mm (25189)Titanium (91588)

4x10mm (89206)

Button Head (bhcs)

5.5x0.5mm (31381)

5.5x1.0mm (31382)

5.5x2.0mm (31383)

3x8mm Washer (89218)

Shims and Washers

4

:: :: Quick Start GuideQuick Start Guide

:: :: Quick Start GuideQuick Start Guide - (cont.) - (cont.)


Battery Charging Steps and Safety:

Remove the battery from the vehicle before charging. Place battery on a fire resistant surface.Avoid any contact with water or other liquids. Be sure to select the correct charging mode for the type of battery you are charging.

ALWAYS use a compatible charger for charging your batteries.

Caution: Never leave the battery unattended while charging. Always disconnect the charger from the power source when finished charging.

Caution: Always disconnect the battery when you are finished driving the vehicle.

Battery Installation:

1. Install the battery with the battery wires directed towards the rear of the vehicle.

2. Secure the battery strap using two hook and loop straps.

Peak Detection Quick Charger

1 2

Battery Notes and Tip:

Connect the battery as shown. Disconnect the battery when not in use!

LiPo: LiPo batteries (lithium polymer) are high current rechargeable batteries. LiPo batteries offer extended run time and peak performance over NiMH batteries. They require a peak detection charger designed specifically for LiPo batteries. These batteries require special care and handling. LiPo batteries are recommended for advanced users only!ALWAYS charge a LiPo battery in LiPo mode.

512/20



Radio System Tuning and Controls:

RULE: Transmitter on First/Vehicle on Second, Vehicle off First/ Transmitter off Last!

1) Slide the battery cover to remove cover. 2) Install alkaline or rechargeable AA size batteries into the battery holder. 3) Slide the battery cover back into place making sure it is completely closed and secure. 4) Turn the power ON. If the power indicator LED fails to light, check the batteries for insufficient contact or incorrect polarity.

On/Off Switch

Radio System Tuning and Controls:

DO NOT hold the trigger when turning on the radio.

Refer to Radio owners manual for more in-depth instructions on radio operation and functions.

Throttle set to Neutral!

Neutral

Push trigger for Brake

Pull trigger for Throttle

Adjust steering trim so front wheels point

straight. Install body and body clips.Ready to go!

:: :: Step 3Step 3

:: :: Step 2Step 2

6

:: :: Step 1Step 125810

Sun Gear Shim

25810Sun Gear

Shim25810

Sun Gear25810Diff

O-Ring

25810Diff

O-Ring 25810Input Pin

25810Sun Gear

25810Input Pin

313502.5x10mm

FHCS

9156310x15x4mm

Bearing

25808Diff Gasket

25812Sun Gear

Shim

25812Sun Gear

Shim

25812Input Pin

25812Input Pin

25812Center Diff Sun Gear

25812Center Diff Sun Gear

25811Spur Gear (54T, 32P)

25807Diff Case (Center)

25812Diff

O-Ring

25812Center Diff

Shaft25812

Center Diff Outdrive

915648x16x5mm

Bearing

25810Planetary

Gear

25810Diff Cross

Pin

25810Diff Output

Shaft

25810Diff Output

Shaft

25807Diff Case

(Front/Rear)

25808Ring Gear,

37T

x4x4

x2x2

x2x2

x4x4

x4x425810Planetary Gear Shim

25812Diff O-Ring

diff

fluid

Front Diff Fluid:60k cst #5458

Rear Diff Fluid:3k cst #5452

Build 2 (1 front, 1 rear)

Build 1 (1 center)

:: :: Step 6Step 6

:: :: Step 5Step 5

7

:: :: Step 4Step 4

Some residual shock fluid may appear

around the shock cap after the first few runs as a result of

bleeding.

Leave a gap when installing the

shock cap.

Compress shock shaft half way.Let shock fluid bleed from cap,

then tighten cap.

For less rebound, compress shock shaft farther before tightening the shock cap.

For more rebound, do not compress shock shaft as far

before tightening the shock cap.

!

! !shock fluid

Front Shock Fluid:40wt #5423

Rear Shock Fluid:40wt #5423

Some residual shock

around the shock cap before tightening the shock cap.

x2x2

x2x2

25831E-Clip, 2.5mm

25831Shock

O-Ring

25831Shock Seal Bushing

25825Shock Bottom

Cap

25825Shock Cap

25831Shock

Bladder

25825Shock Body

25825Shock Piston

25826Shock Shaft

(Front - Short)(Rear - Long)

25812Center Diff Cross Pin

25812PLanetary Gear Shim

25812Center Diff Planetary

Gear

25811Center Diff

Gasket25812

Input Shaft Spline

314482.5x8mm

FHCS

25828Pivot Ball,

Long

25825Shock Eyelet

25825Uptravel Spacer

892083x14mm

FHCS

x4x4

x2x2

x4x4

x4x4

diff

fluid

Center Diff Fluid:100k cst #5459

8

:: :: Step 9Step 9

:: :: Step 8Step 8

:: :: Step 7Step 7

x2x2

x2x2

x2x2

251873x14mm

BHCS

314005x8x2.5mm

Bearing

258052.6mmWasher

25809Input Pinion,

Grooved

25806Gearbox,

Front

25805Servo Saver

Spring Collar

25825Spring Cup

x2x2

x2x2

x2x2

x2x2

x2x2

25819Steering Block Hat Bushing

25215M3 Locknut

410792.5x6mm

SHCS

892023x12mm

BHCS

25802Arm Mount

Insert

25802Arm Mount

25809Outdrive

Shaft915648x16x5mm

Bearing

2584310x15x4mm

Bearing

25801Skid Plate,

Front

313502.5x10mm

FHCS

25805Servo

Saver Tube

25805Upper Servo Saver Arm

25805Lower Servo Saver Arm

25805Servo Saver

Spring

25805Steering

Rack

25805Bellcrank

Arm

25825Spring Collar

25832Shock Spring

x2x2 x2x2252033x12mm

FHCS

812624x10mm

FHCS

2.5mm

9

:: :: Step 122

:: :: Step 1Step 111


x2x2

x2x2

x4x4

x2x2

x2x2

x2x2 x2x2x2x2

x2x2

25819Caster Block Hat Bushing

25819Hat

Bushing25818

Steering Block

25821Pin Screw

25821Slider Drive Shaft, Male

892023x12mm

BHCS

252113x10mm

BHCS

252113x10mm

BHCS

25818Caster Block

892023x12mm

BHCS

25804Front Arm

25816Front Shock

Tower

25817Body

Mount

25817Body Post

6332Body Clip

252113x10mm

BHCS

25803Inner

Hinge Pin

25802Arm Mount

Insert

25802Arm Mount

25806Gearbox

Cap

10




1mm25215

M3 Locknut

25803Outer Hinge

Pin

257105x11x4mm

Bearing

258202x9.8mm

Pin

25821Slider Drive

Shaft, Female

9156310x15x4mm

Bearing25820

12mm Hex

1mm

x2x225835Anti-Roll Bar

Eyelet

812583x12mmSet Screw

25835Anti-Roll Bar, Front

25835Anti-Roll Bar Pivot

Ball

252253x3mm

Set Screw

11




Build x2 (right and left side)


15.50mm

22.00mm

Steering Turnbuckle

Steering Turnbuckle

x2x2

x2x2

x2x2

25824Ball Cup

25824Ball Cup

25824Turnbuckle

25824Turnbuckle

25828Pivot Ball,

Long

892033x16mm

BHCS

251873x14mm

BHCS

251893x22mm

BHCS

25215M3 Locknut

251873x14mm

BHCS

x2x225828Pivot Ball,

Long

25815Motor Mount 25815

Motor Mount Pivot Screw

911583x4mmBHCS

25815Motor Mount

Nut

25852Chassis

315192.5x5mm

BHCS

25800Spur Gear

Cover

12




x2x2892023x12mm

BHCS

25806Gearbox

Cap

25809Input Pinion

915648x16x5mm

Bearing

2584312x18x4mm

Bearing

25806Gearbox,

Rear

x2x2315202.5x6mm

BHCS

25856Drive Shaft

x2x2x2x2

x2x2

x4x425852Chassis Guard

252113x10mm

BHCS

892074x12mm

BHCS

25852Drive Shaft

Cover

252113x10mm

BHCS

13


:: :: Step 23

:: :: Step 22Step 2225802

Arm Mount

25803Inner Hinge

Pin

251873x14mm

BHCS

6332Body Clip

258202x9.8mm

Pin

2582012mm Hex

25821Pin Screw

25821Slider Drive

Shaft, Female25818

Rear Hub

25817Body Post

25817Body Mount

25804Rear Arm

252113x10mm

BHCS

x2x2

x2x2

x2x2

x2x2

x2x2

x2x2

x2x2

x2x2

25802Arm Mount

Insert

892033x16mm

BHCS

252113x10mm

BHCS

257105x11x4mm

Bearing

25821Slider Drive Shaft, Male

9156310x15x4mm

Bearing

25816Rear Shock

Tower

25802Arm Mount

Insert

25802Arm Mount

14



:: :: Step 25


26.00mmRear Camber Turnbuckle

x2x2

x2x2

x2x2

x2x2

25824Ball Cup

25824Turnbuckle

25828Pivot Ball,

Long

25215M3 Locknut

911583x4mmBHCS

x2x225835Anti-Roll Bar

Eyelet

812583x12mmSet Screw

25835Anti-Roll Bar, Rear

25835Anti-Roll Bar Pivot

Ball

252253x3mm

Set Screw

251893x22BHCS

23083x18mm

BHCS

1mm

25215M3 Locknut

25803Outer Hinge

Pin

:: :: Step 29


15


x2x2892023x12mm

BHCS

x2x2892093x18mm

FHCS

892023x12mm

BHCS

x2x2314482.5x8mm

FHCS

25853Front

Bumper

25853Front

Bumper Brace

x2x2

x2x2

23083x18mm

BHCS

25853Front Light Bucket Cap

25855Front LED

25804ShockGuard

23083x18mm

BHCS

252113x10mm

BHCS

251883x20mm

BHCS

25827Pivot Ball,

Small

25825Shock Spacer

25804Shock Guard

23083x18mm

BHCS

252113x10mm

BHCS

251883x20mm

BHCS

25827Pivot Ball,

Small

x2x2

x2x2

x2x2

892074x12mm

BHCS

252033x12mm

FHCS

812624x10mm

FHCS

25801Skid Plate

x2x2

x2x2

315202.5x6BHCS

892064x10mm

BHCS

16




x2x271050Hook and

Loop Straps

25800Wire Clip

x2x2315413x6mm

FHCS

315313x6mmBHCS

25800Receiver

Box

x2x2892093x18mm

FHCS

x2x2

x2x2

x2x2

x4x4

315202.5x6mm

BHCS

25855Rear Led

Lights

25854Rear Bumper

Brace

25854Mud Flaps

315323x8mm BHCS

x4x4

x2x2

25854Rear

Bumper

25854Rear Lower

Bumper

25854Mud Flap

Plate

252113x10mm

BHCS

252113x10mm

BHCS

251873x14mm

BHCS

x2x225852Battery Spacer Foam

17

:: :: Step 34



Set The Gear Mesh:

To set the gear mesh, rock the spur gear back and forth without making the pinion gear move. Exessive amounts of spur gear movement (loose gear mesh) will cause premature gear failure. If the spur gear mesh is tight, there will be no movement between the spur and pinion gears. A gear mesh that is too tight or too loose will reduce power and damage the gear teeth.

25815Motor Mount

Tension Spring

251883x20mm

BHCS

x2x2315323x8mm

FHCS

25815Motor

Mount Plate

252253x3mm

Set Screw

2586115T-32P Pinion

Motor

25800Spur Gear

Cover

x4x4315323x8mmBHCS

252113x10mm

BHCS

Servo

18




0.80mmServo Link Turnbuckle

x2x2

x2x2

25824Ball Cup

258244x12mm Set Screw

25827Pivot Ball,

Short

Carefully apply ca glue (tire adhesive) to the tire bead on the side. Do one side at a time, allowing it to dry before gluing the

other side!CA glue not included!

!#1597

ca glue

Build 4

25860Pro SC10

Tire

25860Pro SC10

Insert

25860Pro SC10

Wheel

x2x289202M3x12mm

BHCS

31532M3x8mm

BHCS25805

Servo Arm, 25T

Battery

ESC6338

Antenna Tube, 12”

25225M3x3mm Set Screw

Receiver

6727Servo Tape

19



Install 4

x4x4x3x3

x2x2

6332Body Clip

315323x8mmBHCS

91738M4 Black

Nut Serrated Aluminum

25858SC10 Body,

Painted

x3x391477Nuts, M3,

Black

20

:: Tuning Tips:: Tuning Tips

Rear Camber:

Camber describes the angle at which the tire and wheel rides when looked at from the back. Negative camber means that the tire leans inward at the top. A good starting camber setting is -1°. Adding a small amount of positive camber, where the top of the tire is leaning out, will tend to improve straight-line acceleration on loose tracks.Optional #1719 camber gauge can be used to more accurately set camber.

Front Camber:

Camber describes the angle at which the tire and wheel rides when looked at from the front. Negative camber means that the tire leans inward at the top. A good starting camber setting is -1°. Positive camber, where the top of the tire is leaning out, is not recommended. Optional #1719 camber gauge can be used to more accurately set camber.

Front Camber Links:

Changing the length of the camber link is considered a bigger step than adjusting the ball end height on the tower. Shortening the camber link (or lowering the ball end) will give the front end less roll and quicken steering response. Lengthening the camber link (or raising the ball end) will give the front more roll and slower steering response. Longer camber links are typically used on high grip tracks and shorter links tend to work better on medium-grip loose tracks.

Ackermann:

Ackermann is the angle difference between the front wheels when they are turned to steer the car. For minimal tire slip, it is standard for the inside wheel to steer to a greater angle than the outside wheel. If corner entry steering is too aggressive, try increasing the Ackermann by moving the ball studs to the rearward holes. Increasing the Ackermann will increase the angle difference of the front wheels when steered, resulting in a more stable car on corner entry.

Rear Camber Link:

Changing the length of the camber link is considered a bigger step than adjusting the ball end height on the rear chassis brace. Shortening the camber link (or lowering the ball end) will give the rear end less roll and the car will tend to accelerate or “square up” better. Lengthening the camber link (or raising the ball end) will give the rear more roll and more cornering grip. Longer camber links are typically used on high grip tracks, while shorter links tend to work better on medium grip loose tracks. The kit setting is the best compromise of cornering grip and acceleration.

Set The Gear Mesh:

You should be able to rock the spur gear back and forth in the teeth of the pinion gear without making the pinion gear move. If the spur gear mesh is tight, then loosen the #25188 screw and move the motor away, then try again. A gear mesh that is too tight or too loose will reduce power and damage the gear teeth.

Tips for Beginners:Before making any changes to the standard setup, make sure you can get around the track without crashing. Changes to your vehicle will not be beneficial if you can’t stay on the track. Your goal is consistent laps. Once you can get around the track consistently, start tuning your vehicle. Make only ONE adjustment at a time, testing it before making another change. If the result of your adjustment is a faster lap, mark the change on the included setup sheet (make adddtional copies of the sheet before writing on it). If your adjustment results in a slower lap, revert back to the previous setup and try another change. When you are satisfied with your vehicle, fill in the setup sheet thoroughly and file it away. Use this as a guide for future track days or conditions. Periodically check all moving suspension parts. Suspension components must be kept clean and move freely without binding to prevent poor and/or inconsistent handling.

:: Shocks:: Shocks

:: Gear Differentials:: Gear Differentials

2582525826258272583125832

25807258082581025811258123135031448892089156391564

12ea.101

2ea.

1111110101044

Rival MT10 Shock SetRival MT10 Shock Shaft SetPivot Balls, ShortRival MT10 Shock Rebuild KitRival MT10 Shock Spring Set

Rival MT10 Differential CasesRival MT10 Ring Gear, 37TRival MT10 Front & Rear Diff Rebuild KitRival MT10 Spur Gear, 54T - 32PRival MT10 Center Diff Rebuild KitM2.5x10mm FHCSM2.5x8mm FHCSM3x14mm FHCSFT Bearings, 10x15x4mmFT Bearings, 8x16x5mm

21

:: Shock Fluid:: Shock Fluid5420542754215424542854265422543254295433542354345430543854355431543654375425

2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.

10 Weight Silicone Shock Fluid15 Weight Silicone Shock Fluid20 Weight Silicone Shock Fluid22.5 Weight Silicone Shock Fluid25 Weight Silicone Shock Fluid27.5 Weight Silicone Shock Fluid30 Weight Silicone Shock Fluid32.5 Weight Silicone Shock Fluid35 Weight Silicone Shock Fluid37.5 Weight Silicone Shock Fluid40 Weight Silicone Shock Fluid42.5 Weight Silicone Shock Fluid45 Weight Silicone Shock Fluid47.5 Weight Silicone Shock Fluid50 Weight Silicone Shock Fluid55 Weight Silicone Shock Fluid60 Weight Silicone Shock Fluid70 Weight Silicone Shock Fluid80 Weight Silicone Shock Fluid

:: Diff Fluid:: Diff Fluid545154525444545354465454545554565457545854485459546154635465

111111111111111

Silicone Diff Fluid 2,000CSTSilicone Diff Fluid 3,000CSTSilicone Diff Fluid 4,000CSTSilicone Diff Fluid 5,000CSTSilicone Diff Fluid 6,000CSTSilicone Diff Fluid 7,000CSTSilicone Diff Fluid 10,000CSTSilicone Diff Fluid 20,000CSTSilicone Diff Fluid 30,000CSTSilicone Diff Fluid 60,000CSTSilicone Diff Fluid 80,000CSTSilicone Diff Fluid 100,000CSTSilicone Diff Fluid 200,000CSTSilicone Diff Fluid 500,000CSTSilicone Diff Fluid 1,000,000CST

Front/RearCenter

25825

25825

25832

25825

25825

25825

25810

25810

25812

25812

2581225812

25812

25812

25812

25812

25812

25811

2581231448

25810

25810

25810

25810

25810

25810

25810

25810

25808

25807

25807

25808

89208

25812

25811

31350

91563

91564

91563

25825

25827

Center Diff25812

Front/Rear Diff25810

25825

25826

25831

25831

25825

25831

25831

25831

25831

22

:: Front Bumpers:: Front Bumpers

:: Rear Bumpers:: Rear Bumpers

230825853258553144889202

1011

1010

M3x18mm BHCSPro4 SC10 Front BumperPro4 SC10 LED Light KitM2.5x8mm FHCSM3x12mm BHCS

2308

2585525853

25853

25853

25853

8920289202

31448

31448

2308 89202

25211

25211

2521125211

25211

25187

89209

89209

31520

31520

3153231532

31532

31532

25854

25854

25854

25854

25854

25854

25854

252112518725854258553152031532

101011

1010

M3x10mm BHCSM3x14mm BHCSPro4 SC10 Rear BumperPro4 SC10 LED Light KitM2.5x6mm BHCSM3x8mm BHCS

:: Steering Bellcrank:: Steering Bellcrank

:: Front Bulkhead:: Front Bulkhead

252152580525819314004107989202

251872520325211258012580531532812628920289209

10114

1010

10101011

10101010

M3 LocknutRival MT10 Steering Bellcrank SetRival MT10 Hat Bushing Set5x8x2.5mm BearingM2.5x6mm SHCSM3x12mm BHCS

M3x14mm BHCSM3x12mm FHCSM3x10mm BHCSRival MT10 Skid PlatesRival MT10 Steering Bellcrank SetM3x8mm BHCSM4x10mm FHCSM3x12mm BHCSM3x18mm FHCS

23

25819

25819

25215

31400

31400

31400

31400

25215

25187

25187

25187

25187

25805

25801

25211

3153289202

25211

81262

81262

25203

25203

89209

89209

25805

25805

25805

25805

25805

25805

25805

8920225805

41079

41079

25805

24

:: Front Gearbox:: Front Gearbox

:: Rear Gearbox:: Rear Gearbox

252112580225803258062580931350892029156391564

252032521125801258022580325806258093152081262892028920389206911589156391564

101111101044

101011111

10101010101044

M3x10mm BHCSRival MT10 Arm MountsRoval MT10 Hinge Pin SetRival MT10 Front & Rear GearboxesRival MT10 Oudrive Shaft & Pinion SetM2.5x10mm FHCSM3x12mm BHCSFT 10x15x4mm BearingFT 8x16x5mm Bearing

M3x12mm FHCSM3x10mm BHCSRival MT10 Skid PlatesRival MT10 Arm MountsRoval MT10 Hinge Pin SetRival MT10 Front & Rear GearboxesRival MT10 Oudrive Shaft & Pinion SetM2.5x6mm BHCSM4x10mm FHCSM3x12mm BHCSM3x16mm BHCSM4x10mm BHCSM3x4mm BHCSFT 10x15x4mm BearingFT 8x16x5mm Bearings

89202

8920289202

25806

25806

25809

25802

25802

25802

25802

25802

89203

25801

89206

31520 89206

25203

81262

81262

25802

25803

25803

89202

25211

89202 91158

25806

25806

25809

25809

91564

91564

91563

91563

31350

25802

25802

25802

25802

25802

25803

25803

25802

89202

25211

25211

89202

89202

25

:: Front Arm:: Front Arm

:: Rear Arm:: Rear Arm230825211252152571025803258042581825820258219156391738

1010102111414

10

M3x18mm BHCSM3x10mm BHCSM3 Locknut5x11x4mm BearingsRival MT10 Hinge Pin SetRival MT10 Suspension Arm SetRival MT10 Caster & Steering Block SetRival MT10 12mm Wheel HexesRival MT10 Drive Shaft SetFT 10x15x4mm BearingsM4 Black Nut, Serrated Aluminum

230825187252112521525710258032580425818258192582025821892039156391738

101010102111141

104

10

M3x18mm BHCSM3x14mm BHCSM3x10mm BHCSM3 Locknut5x11x4mm BearingsRival MT10 Hinge Pin SetRival MT10 Suspension Arm SetRival MT10 Caster & Steering Block SetRival MT10 Hat Bushing SetRival MT10 12mm Wheel HexesRival MT10 Drive Shaft SetM3x16mm BHCSFT 10x15x4mm BearingsM4 Black Nut, Serrated Aluminum

25821

25187

25818

25820

25820

25215

25215

25804

25804

25211

2308

25803

258182308

25821

25821

25821

25710

25710

91738

91148

91563

91563

25821

25821

25804

25804

25211

2308

25803

25215

25211

25818

25819 25819

25819

89203

25211

26

:: Rear Shock Tower:: Rear Shock Tower

:: Front Shock Tower:: Front Shock Tower63322518825189252112521525816258172582789202

101010101011

1010

Body ClipsM3x20mm BHCSM3x22mm BHCSM3x10mm BHCSM3 LocknutRival MT10 Shock Tower SetRival MT10 Body Mount SetRival MT10 Pivot Balls, ShortM3x12mm BHCS

25817

25817

25817

25817

25817

25817

6332

6332

6332

6332

63326332

6332

25215

25215

25187

25816

25825

25825

25188

2518825211

25189

25189

25827

25827

25215

25816

25827

2582725188

25188

25211

25211

25189

25189

89202

25215

6332

6332251872518825189252112521525816258172582725825

10101010101011

101

Body ClipsM3x14mm BHCSM3x20mm BHCSM3x22mm BHCSM3x10mm BHCSM3 LocknutRival MT10 Shock Tower SetRival MT10 Body Mount SetRival MT10 Pivot Balls, ShortRival MT10 Shock Set

:: Chassis:: Chassis

:: Turnbuckles / Swaybars / :: Turnbuckles / Swaybars / Wheels / TiresWheels / Tires

6332633825188252112522525815258522585625861315003151931520315313153231541710508920791158

2522525824258272582825835258582586081258

101101011210

Body ClipsAntenna Tube, 12”M3x20mm BHCSM3x10mm BHCSM3x3mm Set ScrewRival MT10 Motor Mount SetPro4 SC10 Chassis, Guards, Cover, FoamPro4 SC10 Center Drive Shaft15T-32P Pinion GearM3x2.5mm Set ScrewM2.5x5mm BHCSM2.5x6mm BHCSM3x6mm BHCSM3x8mm BHCSM3x6mm FHCSHook and Loop StrapsM4x12mm BHCSM3x4mm BHCS

M3x3mm Set ScrewRival MT10 Turnbuckle SetRival MT10 Pivot Balls, ShortRival MT10 Pivot Balls, LongRival MT10 Front Anti-Roll Bar SetPro4 SC10 Body, PaintedPro4 SC10 Off Road Tires & Method Wheels, MountedM3x12mm Set Screw

27

31500

25861

25835

25835

25225

25835

25828

25824 25824 25824

2582425824

25824

25828

2582725827

25860

25860

25860

25835

81258

25835

25835

25225

25835

25835

81258

101

1010101111

1010101010102

1010

2582725827

25828 25828

25860

25860

25860

101010

101010101010

1010

25800

6332

31541

6338

25225

25800

25800

25852

25211

25852

25852

25852

25852

71050

71050

25856

31520

89207

25211

31531

31519

91158

25815

2581525815

25188

31532

2585289207

25211

25211

2521131532

28

:: Reedy Batteries:: Reedy Batteries302751752753755758759

2731327315

111111111

AA Alkaline 1.5V (4)Wolfpack LiPo 3300mAh 30C 7.4V w/T-PlugWolfpack LiPo 4000mAh 35C 7.4V w/T-PlugWolfpack LiPo 5400mAh 35C 7.4V w/T-PlugWolfpack LiPo 4500mAh 35C 11.1V w/T-PlugWolfpack LiPo 3000mAh 30C 7.4V w/T-PlugWolfpack LiPo 3000mAh 30C 11.1V w/T-Plug LiPo Pro TX/RX 2400mAh 7.4V FlatLiFe Pro TX/RX 1600mAh 6.6V Flat

:: Reedy Chargers / Accessories:: Reedy Chargers / Accessories

27200

2720127201C227201C2272022722027221272222722327224

647648650747790791

1

111111111

111111

CHARGERS1216-C2 Dual AC/DC Competition Battery Charger324-S AC LiPo/LiFe Compact Balance Charger324-S Charger w/3300mAh 7.4V LiPo Battery324-S Charger w/4500mAh 11.1V LiPo Battery123-S AC LiPo Compact Balance Charger7-in-1 Universal Charge Lead (4mm)T-plug Charge Lead (4mm)XH 2-6S Balance Board (4mm)RX Charger Lead FUT (4mm)US to IEC 320 C5 angle 1M AC Power Cord

ACCESSORIESSilicone Wire 12AWG-Black (1m)Silicone Wire 14AWG-Black (1m)Shrink Tubing - 15pcs 4.5mm x 20mmSilicone Wire 12AWG-Black (30m)Silicone Wire 13AWG-Black (1m)Silicone Wire 13AWG-Black (30m)

:: Lubes & Adhesives / Decals / Misc.:: Lubes & Adhesives / Decals / Misc.1105159615976588659166366727

7263840

1111112

11

FT Green Slime Shock LubeFT Locking AdhesiveFT Tire AdhesiveBlack Grease - 4ccS.Diff Lube - 4ccSilicone Grease - 4ccServo Tape

Reedy 2016 Sticker Set2016 Team Associated Decal Sheet

:: MyLaps Transponders:: MyLaps TranspondersMLP10R120MLP10R147MLP40R222

111

MyLaps RC4 (3-wire) TransponderMyLaps RC4 (3 wire) Transponder, blackMyLaps Transponder Holder

:: XP/AE Electronics:: XP/AE Electronics292032920429257

111

AE XP120 2.4GHz 2CH Radio SystemAE XP-R4 2.4GHz 4CH ReceiverAE XP130 2.4GHz 3CH Radio System

:: Reedy Electronics:: Reedy Electronics

271002710127102271032710527111271142711527130271352713627139

907

29180291842918529186

111111111111

1

1111

SERVOS AND SERVO ACCESSORIESRS1206 Digital HV Hi-Speed Competition ServoRT1508 Digital HV Hi-Torque Competition ServoRS1206 Servo Case Set w/screwsRS1206 Servo Gear SetRT1508 Servo Gear Set1514MG Digital RTR ServoRT2406 Digital HV Brushless Competition ServoRT2706A Digital HV Alum. Brushless Comp. Servo1514MG Servo Gear SetRT2406 Gear SetRT2706A Gear SetRT2406 Case Set

SPORTS MOTOR540-SL4 3300kV 4-pole Sensorless Brushless Motor

ELECTRONIC SPEED CONTROLSSC800-BL ESCSC800-BL/SC1000-BL/SC1000-DB/SC600-BL SwitchSC600-BL Brushless ESCSC600-BL Fan

29

:: Tools:: Tools1111111211141449145214981499150015011502150315041505150615071508151815191522154515551568156915701571157916571658165916601661166216631664166516661667166816691670167116721674

167516791719173737183987

1111111111111111111111111111111111111111111

1111

121

FT Turnbuckle WrenchFT 4mm Turnbuckle WrenchFT Dual Turnbuckle WrenchOff Road Ride Height GaugeFT TC Ride Height GaugeFT Universal Tire BalancerFT Body ReamerFT 1.5mm Hex DriverFT 2.0mm Hex DriverFT 2.0mm Ball Hex DriverFT 2.5mm Hex DriverFT 2.5mm Ball Hex DriverFT 3.0mm Hex DriverFT 5.0mm Hex DriverFT 5.5mm Nut DriverFT 7.0mm Nut DriverFT Hex Driver Tool Set, 3pc (1.5, 2.0, 2.5)FT Hex/Nut Driver Tool Set, 5pc.FT Professional Mini Digital ScaleFT 5/64” Blue Hex DriverFT Clutch Gauge, 4 ShoeFT 5.5mm Short Nut DriverFT 7mm Nut Driver, T-HandleFT 5.5mm Short Nut DriverFT 1:8 Wheel Nut Wrench, 17mm HexFT Ball Cup WrenchFT 1/4” Hex Drive .050” TipFT 1/4” Hex Drive 1/16” TipFT 1/4” Hex Drive 5/64” - 2.0mm TipFT 1/4” Hex Drive 3/32” TipFT 1/4” Hex Drive 1.5mm TipFT 1/4” Hex Drive 2.5mm TipFT 1/4” Hex Drive 3/16” Nut Driver TipFT 1/4” Hex Drive 1/4” Nut Driver TipFT 1/4” Hex Drive 11/32” Nut Driver TipFT 1/4” Hex Drive 5.5mm Nut Driver TipFT 1/4” Hex Drive 7.0mm Nut Driver TipFT 1/4” Hex Drive 8.0mm Nut Driver TipFT 1/4” Hex Drive 5/64” - 2.0mm Ball End TipFT 1/4” Hex Drive 3/32” Ball End TipFT 1/4” Hex Drive Standard Screwdriver TipFT 1/4” Hex Drive Phillips Screwdriver TipFT 1/4” 5 Piece Power Tool Tips Set (5/64-2.0mm, 1.5mm, 2.5mm, 5/64”- 2.0mm ball, 2.5mm ball)FT Shock Shaft PliersFT T-Handle Ratchet DriverFT Camber + Track Width ToolFT Body Scissors12 Inch Nylon Wire TiesFT Droop Gauge

:: Apparel :: Apparel / Promotional/ Promotional

SP124*SP126*SP128*SP129*SP143*SP200*SP201*

SP125*SP127*SP231*SP142*SP160*

SP20SP260SP261SP430SP431SP432SP434SP435

SP115SP116SP117SP118SP300SP301SP302SP303SP304SP305SP425

1111111

111111

11111111

11111111111

TEE SHIRTSAE 2017 Worlds Tee, Black (S, M, L, XL-5XL)Team Associated Tri T-Shirt, Black, (S, M, L, XL-5XL)Team Associated Womens Tri T-Shirt, Black, (S, M, L)Team Associated Youth Tri T-Shirt, Black, (S, M, L)Reedy W19 T-Shirt, Black, (S, M, L, XL-3XL)Element RC Logo T-Shirt, Gray, (S, M, L, XL-5XL)Element RC Rhombus T-Shirt, Black, (S, M, L, XL-5XL)

HOODIES/JACKETSAE 2017 Worlds Pullover, Black, (S, M, L, XL-3XL)Team Associated Tri Zip-Up, Black, (S, M, L, XL-3XL)Element RC Logo Pullover, Black, (S, M, L, XL-5XL)Reedy W19 Pullover, Black, (S, M, L, XL-3XL)Factory Team Logo Lightweight “Medal” Zip Up Streaked, Black, (S, M, L, XL-4XL)

HATSAE Patch Trucker HatElement RC Hat, Curved Bill, BlackElement RC Hat, Flat Bill, BlackReedy Trucker Hat 2018Team Associated Tri Trucker Hat, Flat Bill, BlackTeam Associated Tri Trucker Hat, Curved Bill, BlackFactory Team Logo Trucker Hat, Flat BillFactory Team Logo Trucker Hat, Curved Bill

BANNERS/MATS CARRIERSReedy Circuit Cloth BannerReedy Power Vinyl Banner, 48x24Reedy power Cloth Banner, 96x24Reedy Power Cloth Banner, 48x24Team Associated Vinyl Banner, 48x24Factory Team Vinyl Banner, 48x24Team Associated Cloth Banner, 96x24Team Associated Cloth Banner, 48x24Factory Team Cloth Banner, 96x24Factory Team Cloth Banner, 48x24FT Fluid Carrier

* Use part number plus the desired size when ordering!

Pro4 Manual.indd - Associated Electrics

Documents