292PRECISION DEGREASING
SOLVENT
PRODUCT DATA SHEET
APPLICATION AREAS
• Bearings
• Chains & Cables
• Valves & Fittings
• Molds
• Production Tools
• Finished Parts
KEY FEATURES AND BENEFITS• Low aromatic content• Fast evaporation rate• Low residue• High dielectric strength• NSF registered• Contains no ozone depleting materials• Safe for all metals and plastics
PACKAGINGAerosol
DIRECTIONSChesterton 292 should be used as received and not be diluted with other organic solvents or water. Before using on painted surfaces, plastic or rubber, a small amount of 292 should be placed on the surface in a non-critical area. Wait about 15 minutes and check surface for attack or softening. If damage has occured, do not use product. Apply the product directly to the surface to be cleaned or immerse the part/equipment into the product. Allow a short time for 292 to attack the soil. In some cases, with stubborn deposits, mechanical action should be used. Wipe the part/ equipment with a absorbent wiper or allow the part/equipment to air dry. Cleaned mechanical equipment, bearings, chains and other moving parts should be relubricated before returning the component to service.
DESCRIPTIONChesterton® 292 Precision Degreasing Solvent is a fast acting, industrial strength solvent blend that is performance designed to clean and flush away oily and greasy sludge, grit and grime in a single application. Chesterton 292 provides rapid evaporation and low odor while accommodating users with an acceptable flash point. Chesterton 292 replaces kerosene, mineral spirits, xylene, toluene and halogenated solvents and is the environmentally safe alternative to solve difficult degreasing problems. Chesterton 292 penetrates quickly to instantly remove oil, grease, wax, tar grit and grime leaving virtually no residue and requiring no rinsing.
Before using this product, please refer to Safety Data Sheet (SDS).
Technical Data reflects results of laboratory tests and is intended to indicate general characteristics only. Since many actual application circumstances are beyond Chesterton's knowledge and/or control, the product user must determine the suitability of the products it intends to use for its particular purpose and assume all risks and liabilities in connection therewith. CHESTERTON DISCLAIMS ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Form No. 071504 1/18
860 Salem Street, Groveland, MA 01834 USA978-469-6888 www.chesterton.com© 2018 A.W. Chesterton Company ® Registered trademark owned by A.W. Chesterton
Company in USA and other countries, unless otherwise noted.
TYPICAL PHYSICAL PROPERTIES
Appearance Clear, Transparent Liquid
Flash Point (Pensky Martens ASTM D 93-85) 41°C (105°F)
Specific Gravity 0.79
Solubility in Water Negligible
Odor Mild hydrocarbon, citrus
Solvency, Kb value 50
292 Precision Degreasing Solvent is not available in EME