8/3/2019 OptiX RTN 600 Product Introduction-A
1/90
www.huawei.com
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Security Level:INTERNAL2007-12-29
OptiX RTN 600 Product
Introduction
RTN---Radio Transmission Node
8/3/2019 OptiX RTN 600 Product Introduction-A
2/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 1Page 1Page 1
Foreword
The OptiX RTN 600 is a split-mount digital microwave
transmission system developed by Huawei. RTN 600
provides various service interfaces and features flexible
configuration and easy installation. It can construct a radio
transmission network that serves as backhaul links for mobile
communication networks or private networks. The RTN 600
can also construct a hybrid network that is used to transmit
SDH, PDH, and Ethernet services together with the OptiXseries optical transmission products of Huawei.
Adjust SlideAdjust Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
3/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 2Page 2Page 2
References
Product Description and Hardware Description in the OptiX
RTN 600 ProductManual.
Digital Microwave Communication principle
8/3/2019 OptiX RTN 600 Product Introduction-A
4/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 3Page 3Page 3
Objectives
Upon completion of this course, you will be able to:
Describe the main characteristics of OptiX RTN 600.
Describe the system structure ,software and hardware
structure of OptiX RTN 600.
Know the types of the IDU and their features
List the functions of boards in the IDU, ODU, Hybrid coupler.
New introduce slide of V1R3 is remarked by
Adjust Slide
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
5/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 4Page 4Page 4
Contents
1. Equipment Overview
2. Equipment Structure
8/3/2019 OptiX RTN 600 Product Introduction-A
6/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 5Page 5Page 5
Contents
1. Equipment Overview
1.1 Equipment Components
IDU
ODU
Antenna
Intermediate Frequency (IF) Cable
Hybrid coupler
1.2 Equipment Characteristics
8/3/2019 OptiX RTN 600 Product Introduction-A
7/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 6Page 6Page 6
Equipment Components
Hybrid
CouplerIF Cable
IDU 620
ODU
Antenna
Pole
Adjust Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
8/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 7Page 7Page 7
Equipment ComponentsCont.
Hybrid
Coupler
IF Cable
IDU 605 2B
ODU
Antenna
Pole
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
9/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 8Page 8Page 8
IDU
The IDU is the indoor unit of an OptiX RTN 600 system. It
accesses services, and performs multiplexing/de-
multiplexing and IF processing of the services.
The OptiX RTN 600 IDU is available in three types: IDU
610, IDU 620, and IDU 605.
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
10/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 9Page 9Page 9
IDU 610/620
IDU 610
IDU 620
IDU 610 is 1U high and supports
one microwave direction.
IDU 620 is 2U high and supports
maximum four microwave
directions.
8/3/2019 OptiX RTN 600 Product Introduction-A
11/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 10Page 10Page 10
IDU 605
IDU 605 2B
IDU 605 1B
IDU 605 1A
IDU 605 is 1U high , supports one microwave direction., have there types:
IDU 605 1A:
maximum capacity 5 E1
Support 1+0 configure
IDU 605 1B:
maximum capacity 16 E1
Support 1+0 configure
IDU 605 2B:
maximum capacity 16 E1
Support 1+1configure
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
12/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 11Page 11Page 11
IF Cable
The IF cable provides -48V power for ODU and transmits the IF signal andODU management signal between IDU and ODU.
The IDU and ODU are connected by IF jumper and IF Cable:
IF jumperThe IF jumper is a 2 m RG223 cable. The IF jumper uses a TNC
connector at one end to connect to the IF board, a type-N connector at the other
end to connect to the IF cable.
IF CableBoth end are type-N connector, one end to connect to IF jumper, the
other end to connect to ODU. There are two types of IF Cable: RG-8U and 1/2
inch.
RG-8U cable is used for the distance less than 180 meter.
1/2 inch cable is used for the distance between 180m and 300m.
IF transit jumper IF cable
Adjust SlideAdjust Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
13/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 12Page 12Page 12
ODU
Outdoor unit (ODU) realizes the
mutual conversion between IF
analog signal and RF signal.
6G ODU 7~38G ODU
Adjust SlideAdjust Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
14/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 13Page 13Page 13
Hybrid Coupler
When two ODUs share one antenna, the ODUs must be
connected to an RF signal coupler/ splitter (hybrid coupler).
Then, the hybrid coupler is connected to the antenna.
738G Hybrid Coupler6G Hybrid Coupler
Adjust SlideAdjust Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
15/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 14Page 14Page 14
Antenna
The antenna performs the directional transmission and reception
of RF signals. The main parameters are frequency band,
diameter and antenna gain.
Single-polarized antennadual-polarized antenna
Adjust SlideAdjust Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
16/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 15Page 15Page 15
IDU 610/620 Characteristics
PDH/SDH integrated microwave transmission system.
The modulation mode and link capacity are set through software.
Microwave link supports the SNCP (IF0 Board not support
SNCP
Except for SL4IF0IFXEMS6 not support IDU 610
the other boards of IDU 610 and IDU 620 are compatible each
other.
Adjust SlideAdjust Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
17/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 16Page 16Page 16
IDU 610/620 Characteristics (cont.)
IFX board support XPIC function
Support N+1 protection and REG function
Synchronous data interface /Orderwire spanning function
SL61SCCVER.C
The external clock interface supply 2M overhead , it can be used
as the wayside service interface, or can transparently transmit
DCC bytes, synchronous data overhead bytes, asynchronous data
overhead bytes, and orderwire overhead bytes.
Support STM-4 MSP
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
18/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 17Page 17Page 17
IDU 605 Characteristics
PDH microwave transmission platform
The modulation mode and link capacity are set through software.
Microwave link not support SNCP
Integrative box equipment
orderwire spanning, orderwire addressing calls, orderwire group
calls.
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
19/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 18Page 18Page 18
IDU Compare
Item IDU 605 IDU 610 IDU 620
RF configuration mode 1+0IDU 605
1A/1B
1+1IDU 605 2B
1+0 1+0,1+1, N+1, XPIC
IF Board IF logical board (IF0) IF1 IF0, IF1, IFX
Maximum capacity (single
carrier)
5 E11A
16 E11B/2B
STM-1
Pluggable board Not support support
Microwave type PDH SDH/PDH
Microwave modulation
scheme
QPSK QPSK/16QAM/32QAM/64QAM/128Q
AM
Service type E1 SDHPDHE1E3DS3 and
Ethernet services
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
20/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 19Page 19Page 19
Questions
What are the components of OptiX RTN 600? What
are the functions of them? What about the connection
relation among the components?
What types do the optiX RTN 600 have What are the
characteristics of each type IDU?
Adjust SlideAdjust Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
21/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 20Page 20Page 20
Contents
1. Equipment Overview
2. Equipment Structure
8/3/2019 OptiX RTN 600 Product Introduction-A
22/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 21Page 21Page 21
Contents
Equipment Structure
2.1 System Diagram
2.2 Software Structure
2.3 IDU 605 Structure and Boards
2.4 IDU 610/620 Structure and Boards
2.5 ODU Interfaces and Parameters
2.6 Hybrid coupler Parameters
Adjust SlideAdjust Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
23/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 22Page 22Page 22
Software Structure
NM software
Host software
Board softwareODU
In the OptiX RTN 600, all the board
software and host software are integrated
together and run on the SCC board.
SCC
ODU is regarded as a logical board. The
ODU board software in the SCC board
manages and controls the ODU hardware
through the management signal between
the IDU and ODU.
EMS6
EMS6 board has independent boardsoftware, which runs in the CPU of the
EMS6 board.
Adjust SlideAdjust Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
24/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 23Page 23Page 23
Contents
Equipment Structure
2.1 System Diagram
2.2 Software Structure
2.3 IDU 605 Structure and Boards
2.4 IDU 610/620 Structure and Boards
2.5 ODU Interfaces and Parameters
2.6 Hybrid coupler Parameters
Adjust SlideAdjust Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
25/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 24Page 24Page 24
IDU Structure IDU 605 1A
IDU 605 is 1U high and
adopts the nature heat
dissipation mode.
Support 1+0 configuration. IDU 605 1A
IDU 605 1A logic board configuration
NotePF1 support5E1, E1
interface is DB44, the
physical interface can
access 8E1,butonlyuse
1~5E1, 6~8E1 notbe
processed.
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
26/90
8/3/2019 OptiX RTN 600 Product Introduction-A
27/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 26Page 26Page 26
IDU Structure IDU 605 1B
IDU 605 is 1U high and
adopts the nature heat
dissipation mode.
Support 1+0 configuration.IDU 605 1B
IDU 605 1B logic board configuration
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
28/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 27Page 27Page 27
IDU 605 1B Front Panel Interface
SynchronousData
Interface
Main
power
switchIndicators
Boolean
interface 1~16E1
Interfaces
ODU
Interfaces
Order
wire
Interface
Asynchronous
data Interface
NM
Serial
Port
NM
InterfacePower
interfaces
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
29/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 28Page 28Page 28
IDU Structure (IDU 605 2B
IDU 605 is 1U high and
adopts the nature heat
dissipation mode.
Support 1+1 configuration.
IDU 605 2B
IDU 605 2B logic board configuration
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
30/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 29Page 29Page 29
IDU 605 2B Front Panel Interface
Synchronous
Data InterfaceMain
power
switchIndicators
Boolean
interface
1~16E1
Interfaces
ODUInterfaces
Order
wire
Interface
Asynchronous
data Interface
NM
Serial
Port
NM
InterfacePower
interfaces
ODU
power
switches
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
31/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 30Page 30Page 30
IDU 605 Indicators Indicators of IDU 605 1A and IDU 605 1B:
Name Color and meaning
PWRRED The system has POWER_ALM
GREENThe system doesnt has POWER_ALM
IDU
On for 100 ms and off for 100 ms alternately (green) :When the board
is being powered on or being reset, the software is being loaded.On for 500 ms and off for 500 ms alternately (green) :The board is in
the BIOS holdover state. The NE software does not exist or is not
running
RED A critical or major alarm occurs in the services.
YELLOW: A minor or warning alarm occurs in the services.
GREEN The IDU works normally.
ODU
RED : A critical or major alarm occurs in the ODU, or the ODU has no
power access.
YELLOW: A minor or warning alarm occurs in the ODU.
GREEN The ODU works normally.
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
32/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 31Page 31Page 31
IDU 605 Indicators (Cont.)
Indicators of IDU 605 2B:
Name Color and meaning
PWR The same as IDU 605 1A andIDU 605 1B
IDU The same as IDU 605 1A andIDU 605 1B
ODU1Indicators of the backup ODU(slot17)The same as IDU 605 1A andIDU
605 1B
ODU2Indicators of the main ODU(slot18)The same as IDU 605 1A andIDU
605 1B
ACT1The Indicators of the standby IF board(slot7),
on( green) The backup IF board is in active state
off The backup IF board is in standby state
ACT2The Indicators of the main IF board(slot8), color :
On (green): The main IF board is in active state
off The main IF board is in standby state
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
33/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 32Page 32Page 32
IDU 605 Logical Board
Logical Board Name Full Name Logical Slot
PW48B 48 V power board Slot 1
SCC System control and
communication board
Slot 2
EOW Orderwire board Slot 3
PF1 5xE1 tributary board Slot 4
PH1 16xE1 tributary board
IF0 PDH IF board Slot 8IDU605 1A/1B)
Slot7/8IDU605 2B)
An IDU 605 is composed of one system board and one power board.
Each functional unit on the physical boards of the IDU 605
corresponds to a logical board and is allocated with a logical slot.
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
34/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 33Page 33Page 33
IDU 605 Signal Processing Flow
IDU 605 not support build-in ADM function, the signal need
not through the cross-connect process, multiplexes E1
service signals into microwave frame signals directly. The
signal processing flow as following:
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
35/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 34Page 34Page 34
IDU 605 Clock Characteristics
The clock tracing neednt to be configured. It is auto-Negotiation,
and clock tracing as the following results:
In a point-to-point network which the NE use IDU 605, the clock
trace auto-negotiation result is the high site NE as free-runmodes and the low site NE trace the high site clock sourse.
One site that the NE use IDU 605, the opposite site that the NE
use IDU 620, the result of clock trace is the IDU 605 clock trace
the IDU 620s clock source.
NoteThe IDU620 clock cannotbe setto trace the IDU605 clock. Otherwise
the clock will self-lock.
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
36/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 35Page 35Page 35
IDU 605 OtherCharacteristics
Supports the setting of the impedance of E1 signals through
the software (75-ohm or 120-ohm).
Supports 1+1 protection for the input power.
Supports the group call function of the orderwire, the group
number is 888. The orderwire number also can be set as
designing.
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
37/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 36Page 36Page 36
Contents
Equipment Structure
2.1 System Diagram
2.2 Software Structure
2.3 IDU 605 Structure and Boards
2.4 IDU 610/620 Structure and Boards
2.5 ODU Interfaces and Parameters
2.6 Hybrid coupler Parameters
Adjust SlideAdjust Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
38/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 37Page 37Page 37
IDU Structure ( IDU 610)
IDU 610 is 1U high and adopts
the nature heat dissipation mode.
Support 1+0 configuration.
EXT slot3
PXC slot1
EXT slot4
SCC slot2
Note: The slotnumbering rule is
from bottom to up
and left to right.
IF boardLine board /tributary
board/data board
Adjust SlideAdjust Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
39/90
8/3/2019 OptiX RTN 600 Product Introduction-A
40/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 39Page 39Page 39
IDU Board -- IF Board IF1
ODU power
supply switch
IF cable interface Indicators
The IF board receives and transmits 1x IF signal. It realizes the
conversion between baseband digital signal and IF signal, it also
provides -48V DC power supply and management signal to the ODU.
8/3/2019 OptiX RTN 600 Product Introduction-A
41/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 40Page 40Page 40
IDU Board -- IF Board IF0
IF cableinterface
ODU powersupply switch
Indicators
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
42/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 41Page 41Page 41
IDU Board -- IF Board IFX
IF cable
interface
XPIC input /output
signal port
ODU power
supply switch
Indicators
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
43/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 42Page 42Page 42
IF Board -- Board Installation
slot20 PXC slot3
PXC slot1
EXT slot4
SCC slot2
EXT slot7
EXT slot3
PXC slot1
EXT slot4
SCC slot2
IDU 610
IDU 620
EXT slot5
EXT slot8
EXT slot6
Paired Slots
Paired Slots
No limitation for board installation under HSB configuration.
Only installing IF boards in paired slots under SD or FD configuration.
Recommended
installationsequence for IF
boards
8/3/2019 OptiX RTN 600 Product Introduction-A
44/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 43Page 43Page 43
IF1 Board -- IF PerformanceAdjust Slide
R1 version, the IF1 board support 7 working mode.
ItemPerformance
4 X E1 8 X E1 16 X E1 STM-1
Modulation
mode
QPSK 16QAM QPSK 16QAM QPSK 16QAM 128QAM
Channel
spacing
(MHz)
7 3.513.75 /14
a7
27.5/
28 b
13.75 /14
a27.5 / 28 b
Coding
scheme
PDH signal is coded through the Reed-Solomon (R-S).
SDH signal is coded through the Trellis-Coded Modulation (TCM) and R-
S.
Remarks
a: At the 18G band, the channel spacing is 13.75MHz, At other bands,
the channel spacing is 14MHz.
b: At the 18G band, the channel spacing is 27.5MHz. At other bands, the
channel spacing is 28MHz.
8/3/2019 OptiX RTN 600 Product Introduction-A
45/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 44Page 44Page 44
IF1 Board -- IF Performance
For R2, the IF1 board add 8 types of working mode.
Item Performance
Capacity E3 22E1 26E1 32E1 35 E1 44 E1 53 E1
Modulation
modeQP
SK
16
QAM
32
QAM
64
QAM
128
QAM
16
QAM
32
QAM
64
QAM
Channel
spacing(MHz)
28 14 14 14 14 28 28 28
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
46/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 45Page 45Page 45
IF0 Board -- IF Performance
ItemPerformance
16 E1 10 E1 5 E1 2 E1
Modulationmode
QPSK QPSK QPSK QPSK
Channel
spacing
(MHz) 28 14 7 3.5
IF0 board support four types of working mode: 16E1, 10E1, 5E1,
2E1modulation mode only support QPSK.
NoticeThe IF0 board and the IF1 board cannot interconnection, even though
they are in the same IF working mode.
IF0 board is use for interconnection with IDU 605
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
47/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 46Page 46Page 46
IFX Board -- IF Performance
IFX support one working mode: STM-1, 128QAM, 28MHz
coded through the Trellis-Coded Modulation (TCM) and R-S
Support XPIC function
In the service of STM-1 mode, when the XPIC function is disabled,
the IFX can be interconnected to IF1, but it isnt recommended.
NoteWhen the XPIC function is disabled, the XPIC INportand
XPICOUTportmustbe looped back byusing an XPIC cable.
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
48/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 47Page 47Page 47
IF Board -- IF Signal Parameters
Item Performance
IF signal
Transmitting frequency
(MHz)
350
Receiving frequency
(MHz)
140
Impedance (ohm) 50
ODUmanagement
signal
Modulation mode ASK
Transmitting frequency(MHz)
5.5
Receiving frequency
(MHz)
10
8/3/2019 OptiX RTN 600 Product Introduction-A
49/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 48Page 48Page 48
IF Board -- Indicators
The space link is faulty.On
The space link is normal.OnLINK
No services are configured.Off
The service has a minor or remote alarm.On
The service has a critical or major alarm.On
The service is normal.On
SRV
The board is not working, not
created, or has no input power.Off
The board hardware is faulty.On
The board is working normallyOn
STAT
MeaningStatusIndicator
8/3/2019 OptiX RTN 600 Product Introduction-A
50/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 49Page 49Page 49
IF Board Indicators (Cont.)
Indicator Status Meaning
ODUOn The ODU is normal.
On The ODU is faulty.
BER
On The microwave BER exceeds the
threshold.Off The microwave BER does not exceed
the threshold.
RMT
On The remote equipment has a Remote
Defect Indication (RDI).
Off The remote equipment has no RDI.
ACTOn The board is in active state.
Off The board is in standby state.
8/3/2019 OptiX RTN 600 Product Introduction-A
51/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 50Page 50Page 50
IDU Board -- Tributary Board PH1
Indicator 1-8 channel E1
DB44
interfaces
9-16 channel E1
DB44 interfaces
The tributary board PH1 processes 16 channel E1 signals and
provides the E1 interface.
8/3/2019 OptiX RTN 600 Product Introduction-A
52/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 51Page 51Page 51
IDU Board -- Tributary Board PD1
The tributary board PD1 processes 32 channel E1 signals and
provides the E1 interface.
116 E1
MDR68 interface1732E1
MDR68 interfaceindicator
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
53/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 52Page 52Page 52
IDU Board -- Tributary Board PL3
The tributary board PL3 processes 3 channel E3/DS3 signals andprovides the E1 interface.
PL3 not support the E3 and DS3 services hybrid configured.
Select the type of the accessed service signal as E3 or DS3 through
software.
indicator SMB
interface
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
54/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 53Page 53Page 53
Tributary Board -- Types
16-channel E1
interface
75 ohm
PH1A
8-channel
E1 interface
75 ohm
PO1A PO1BPH1B
16-channel E1
interface
120 omh
8-channel E1
board
120 ohm
Four groups ofjumpers
determine theimpedance.
Front
panel
The board interface impedance
is selected through the jumper:
If there is a jumper, the
impedance is 75 ohm.
If there is no jumper, the
impedance is 120 ohm.
8/3/2019 OptiX RTN 600 Product Introduction-A
55/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 54Page 54Page 54
Tributary Board -- Types (cont.)
32-channel E1
interface
75 ohm
PD1A PD1B
32-channel
E1 interface
120 omh
Eight groups
of jumpers
determine the
impedance.
Front
panel
PD1 board interface impedance is selected
through the jumper:
If there is a jumper, the impedance is 75
ohm.
If there is no jumper, the impedance is
120 ohm.
PL3 board interface impedance cannot
changed through the jumper
PL3
3-channel
E3/DS3 interface
75 ohm
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
56/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 55Page 55Page 55
Tributary Board -- Board installation
slot
20 PXC slot3
PXC slot1 SCC slot2
EXT slot7
PXC slot1
EXT slot4
SCC slot2
IDU 610
IDU 620
EXT slot5
EXT slot8
EXT slot6
Recommended
installation
sequence for TU
boards
EXT slot4
EXT slot3
8/3/2019 OptiX RTN 600 Product Introduction-A
57/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 56Page 56Page 56
Tributary Board -- Indicators
Indicator Status Meaning
STAT
On The board is working normally.
On The board hardware is faulty.
Off The board is not working, or created, or has no input power.
SRV
On The service is normal.
On The service has a critical or major alarm.
On The service has a minor or remotealarm.
Off No services are configured.
8/3/2019 OptiX RTN 600 Product Introduction-A
58/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 57Page 57Page 57
IDU Board -- Line Board SD1/SDE
SMB
electricalinterface
LC optical
interface
The line board processes 1-2 channel STM-1 signal and
provides STM-1 optical or electrical interface.
8/3/2019 OptiX RTN 600 Product Introduction-A
59/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 58Page 58Page 58
IDU Board -- Line Board SL4
The SL4 line board processes 1 channel STM-4 signal and provides
STM-4 optical interface.
LC optical
interfaceindicator
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
60/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 59Page 59Page 59
Line Board -- Types
SD1
Dual-port STM-1
optical interface
Ie-1
interface
S-1.1
interface
L-1.1
interfaceL-1.2
interface
SL1
Single- port STM-1
optical interface
Ie-1
interface
S-1.1
interface
L-1.1
interfaceL-1.2
interface
SDE
dual-port STM-1
electrical interface
SLE
Single-port STM-1
electrical interface
8/3/2019 OptiX RTN 600 Product Introduction-A
61/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 60Page 60Page 60
Line Board Types (cont.)
SL4 line board support three optical module
SL4
Single STM-4 optical interface
S-4.1
interface
L-4.1
interface
L-4.2
interface
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
62/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 61Page 61Page 61
Line Board -- Board installation
slot
20 PXC slot3
PXC slot1 SCC slot2
PXC slot1
EXT slot4
SCC slot2
IDU 610
IDU 620
EXT slot5
EXT slot8
EXT slot6
EXT slot4
EXT slot3
EXT slot7
Recommended
installation
sequence for LU
boards
Note: Onlyslot6/slot8 supportSL4
8/3/2019 OptiX RTN 600 Product Introduction-A
63/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 62Page 62Page 62
Line Board -- Indicators
Indicator Status Meaning
STAT
On The board is working normally.
On The board hardware is faulty.
Off The board is not working, or created, or no power
supply.
SRV
On The service is normal.
On The service has a critical or major alarm.
On The service has a minor or remote alarm.
Off No services are configured.
LOS1
On No.1 opt. port on the SL1/SD1 board has a R_LOSalarm.
Off No.1 opt. port on the SL1/SD1 board has no R_LOS
alarm.
LOS2On No.2 opt. port on the SD1 board has a R_LOS alarm.
Off No.2 opt. port on the SD1 board has no R_LOS alarm.
8/3/2019 OptiX RTN 600 Product Introduction-A
64/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 63Page 63Page 63
Line Board -- Indicators
LOS
on opt. port on the SL1/SD1 board has a
R_LOS alarm.
off opt. port on the SL1/SD1 board has no
R_LOS alarm.
Note: All the line board have the STAT and SRV indicator.
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
65/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 64Page 64Page 64
IDU Board -- Ethernet Board EFT4
EFT4 is a Ethernet transparent transmission board. It receives,
transmits and processes four-channel Ethernet signals.
slot
20 PXC slot3
PXC slot1 SCC slot2
EXT slot7
PXC slot1
EXT slot4
SCC slot2
IDU 610
EXT slot5
EXT slot8
EXT slot6
EXT slot4
EXT slot3
IDU 620
Recommended
installation
sequence forEFT4 boards
R2 N SlidR2 N Slid
8/3/2019 OptiX RTN 600 Product Introduction-A
66/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 65Page 65Page 65
IDU Board -- Ethernet Board EMS6
The EMS6 accesses 4xFE signals and 2xGE/FE signals, and
supports transparent transmission services and Layer 2 switching.
Provides GE optical interfaces or GE electrical interfaces by using two
SFP modules. The GE electrical interface is compatible with the FE
electrical interface.
Supports an uplink bandwidth of 2xVC-4s.
IDU 620
slot
20 PXC slot3
PXC slot1 SCC slot2
EXT slot8
EXT slot6
EXT slot4
Recommended
installation
sequence for
EMS6 boards
EXT slot7
EXT slot5
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
67/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 66Page 66Page 66
Power Cross-Connection Clock
Board -- PXC
IndicatorIDU
Power
switch
External clock/
Wayside
Interface/Overhea
d data channel
Power input
interface
The PXC board realizes the cross-connection (1616 VC4) and
clock functions , it also provides the DC power for other boards.
8/3/2019 OptiX RTN 600 Product Introduction-A
68/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 67Page 67Page 67
PXC -- Board Installation
IDU 610
slot
20 PXC slot3
PXC slot1 SCC slot2
EXT slot7
IDU 620
EXT slot5
EXT slot8
EXT slot6
EXT slot4
PXC slot1
EXT slot4
SCC slot2
EXT slot3
8/3/2019 OptiX RTN 600 Product Introduction-A
69/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 68Page 68Page 68
PXC -- Indicators
Indicator Status Meaning
STAT
On The board is working normally.
On The board hardware is faulty.
Off The board is not working, or not created, or has
no input power.
PWR
On The power is normal.
On +3.3V power fault or -48V input power abnormal
Off No input power.
SYNC
On The clock is normal.
On The clock source is lost or the switch exists.
ACTOn The board is in active state.
Off The board is in standby status.
8/3/2019 OptiX RTN 600 Product Introduction-A
70/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 69Page 69Page 69
IDU Board -- SCC
SCC provides system control and communication functions, auxiliary
interfaces management and standby internal power module.
Indicators
Indicator
test button
Reset
button
NM serial
port
NM
interface
NM cascaded
interface
Order wire
Asynchronous
data and
Boolean
interface
Flash
memory
8/3/2019 OptiX RTN 600 Product Introduction-A
71/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 70Page 70Page 70
SCC Board -- Board Installation
slot
20 PXC slot3
PXC slot1 SCC slot2
EXT slot7
IDU 610
IDU 620
EXT slot5
EXT slot8
EXT slot6
EXT slot4
PXC slot1
EXT slot4
SCC slot2
EXT slot3
8/3/2019 OptiX RTN 600 Product Introduction-A
72/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 71Page 71Page 71
SCC Board -- NM Cable Connection
The SCC board sets the NE ID through the software. The initial NE ID
is set to 49136 by default.
The IP address of NE is also set through the software. The IP address is
set to 129.9.0.ID by default.
NMS
Connected by
Ethernet cable
8/3/2019 OptiX RTN 600 Product Introduction-A
73/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 72Page 72Page 72
SCC Board -- Wrong Connections
Multiple NEs are
cascaded as a
loop.
Self-loop of
single NE
The connectionwill cause NE
reset frequently.
8/3/2019 OptiX RTN 600 Product Introduction-A
74/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 73Page 73Page 73
SCC Board -- Indicators
Indicato
r
Status Meaning
STAT
On The board is working normally.
On The board hardware is faulty.
Off The board is not working, or not created, or has no input power.
PROG
On 100 ms and off
100 ms
During the board power-on/reset, loading
the software.
On 300 ms and off
300 ms
The board software is introduced through
the BIOS during the power-on/reset.On Initialize the upper layer software.
On 100 ms and off
100 ms
During the board power-on/reset,
BOOTROM self-test fails.
8/3/2019 OptiX RTN 600 Product Introduction-A
75/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 74Page 74Page 74
SCC Board -- Indicators
Indicato
r
Status Meaning
PROG
On During the board power-on/reset, the memory self-
test fails or the upper layer software loading fails, or
during the board running, the logical file and software
are lost.
Off The software is normal.
ALM
On The system is normal.
On The system has a critical or major alarm.
On The system has a minor alarm.
Off The system has no input power.
MANT
On The system is in maintenance state ( that is, loop-
back, laser power-off, and ODU transceiver mute)
Off The system is in working state.
8/3/2019 OptiX RTN 600 Product Introduction-A
76/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 75Page 75Page 75
IDU Board -- Fan Board (FAN)
Indicator
slot
20 PXC slot3
PXC slot1 SCC slot2
EXT slot5
EXT slot8
EXT slot6
EXT slot4
EXT slot7
Fan direction
Indicator Status Meaning
FAN
On The fan is working normally.
On The board is faulty.
Off The board has no input power.
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
77/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 76Page 76Page 76
IDU BoardsSummary
Board Support IDU Type Explain
IF1A/IF1B IDU 610/IDU 620 receives and transmits 1x IF signal. It
realizes the conversion between baseband
digital signal and IF signal, it also provides -
48V DC power supply and management
signal to the ODU.
IF0A/IF0B IDU 620
IFX IDU 620
PH1 IDU 610/IDU 620 8E1tributary boardprovide E1 interface.
PO1 IDU 610/IDU 620 16E1tributary boardprovide E1 interface.
PD1 IDU 610/IDU 620 32E1tributary boardprovide E1 interface.
PL3 IDU 610/IDU 620 3E3/DS3 tributary boardprovide E3/DS3
interface.
R2 New SlideR2 New Slide
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
78/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 77Page 77Page 77
IDU BoardsSummary (cont.)
Board Support IDU Type Explain
SD1 IDU 610/IDU 620 2STM-1 line board, provide STM-1 optical interface
SDE IDU 610/IDU 620 2STM-1 line board, provide STM-1 electrical
interface
SL1 IDU 610/IDU 620 1STM-1 line board, provide STM-1 optical interface
SLE IDU 610/IDU 620 1STM-1 line board, provide STM-1 electrical
interface
SL4 IDU 620 1STM-41 line board, provide STM-4 optical interface
EFT4 IDU 610/IDU 620 4-port 10M/100M Ethernet transparent transmission
board.
EMS6 IDU 620 supports transparent transmission services and Layer
2 switching services
R2 New SlideR2 New Slide
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
79/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 78Page 78Page 78
IDU BoardsSummary (cont.)
Board Support IDU Type Explain
SCC IDU 610/IDU 620 SCC provides system control and communication
functions
PXC IDU 610/IDU 620 Power Cross-Connection Clock Boardprovide
power supply, cross, clock function.
FAN IDU 620 FAN board
R2 New SlideR2 New Slide
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
80/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 79Page 79Page 79
Contents
Equipment Structure
2.1 System Diagram
2.2 Software Structure
2.3 IDU 605 Structure and Boards
2.4 IDU 610/620 Structure and Boards
2.5 ODU Interfaces and Parameters
2.6 Hybrid coupler Parameters
R2 New SlideR2 New Slide
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
81/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 80Page 80Page 80
ODU TypesThe OptiX RTN 600 ODU is available in three types: Standard Power,
High Power, and Low capacity for PDH.
Item Description
Standard Power
ODU
High Power ODU Low Capacity for
PDH ODU
ODU series SP and SPA HP LP
Frequency band 6/7/8/11/13/15/18/2
3/26/38GHz
7/8/11/13/15/18/23/2
6/32/38 GHz
7/13/15/18/23
GHz
Microwave type SDH/PDH PDH
Microwave
modulation scheme
QPSK/16QAM/32QAM/64QAM/128QAM QPSK/16QAM
R2 New SlideR2 New Slide
Adjust Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
82/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 81Page 81Page 81
ODUInterface
6 GHz SP series ODUs are coaxial interfaces
738 GHz ODUs are waveguide
interfaces
The ODUs are classified into the ODU with the waveguide interface and the ODUwith the coaxial interface according to the type of the antenna interface of the ODU.
Adjust Slide
R2 New SlideR2 New Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
83/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 82Page 82Page 82
The Match Relation between IDU and ODU
IDU IF boardODU
SeriesDescription
IDU 605 IF0 LP/SP
IDU 605 match with the LP-ODU firstly. If
the LP-ODU not satisfy the requirement, than
IDU 605 match with the SP-ODU.
IDU 610 IF1A/IF1B SPNot support HP ODU in the result of the natureheat dissipation mode.
IDU 620
IF1A/IF1B SP/HP None
IF0 LP/SP None
IFX SP/HP None
Adjust SlideAdjust Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
84/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 83Page 83Page 83
ODU -- Main Performance
ODU6G38G7G
ITEM L6 U6 7 8 11 13 15 18 23 26 32 38
HPTX
Power.
maximum
30 30 28 26 26 25.5 25 25 23 23
SPTX
Power
maximum
26 26 25.5 25.5 24.5 24.5 24.5 24 22.5 22 20.5
LPTX
Power
maximum
27 27 25 25 23.5 23.5 23
Maximum
receive
power
dBm
-20
Tx Frequency Stability (ppm): 5
jj
Adjust SlideAdjust Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
85/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 84Page 84Page 84
Contents
Equipment Structure
2.1 System Diagram
2.2 Software Structure
2.3 IDU 605 Structure and Boards
2.4 IDU 610/620 Structure and Boards
2.5 ODU Interfaces and Parameters
2.6 Hybrid coupler Parameters
jj
Adjust SlideAdjust Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
86/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 85Page 85Page 85
Hybrid Couplerjj
Hybrid coupler -- Main
Adjust SlideAdjust Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
87/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 86Page 86Page 86
Hybrid coupler -- Main
PerformanceItem Performance
Loss (dB) 3.30.3 (3 dB balanced hybrid coupler)
1.7 (6 dB unbalanced hybrid coupler with waveguide
interfaces)
1.9 (6 dB unbalanced hybrid coupler with coaxial
interfaces)
Ripple of loss (dB) 0.5
Degree of coupling (dB) 3.30.3 (3 dB balanced hybrid coupler)
6.50.6 (6 dB unbalanced hybrid coupler)
Degree of separation (dB) 20Voltage standing wave
ratio (VSWR)
1.2
Power capacity (W) 8
Adjust SlideAdjust Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
88/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 87Page 87Page 87
Summary
OptiX RTN 600 equipment structure
Software Structure host and board software are integrate in SCC board,
ODU as logical board.
IDU divide into three types: IDU 605, IDU 610, IDU 620
IDU 610/620 through configure different board to realize the required function:
IF BoardIF1AIF1BIF0AIF0BIFX
Line BoardSL1SD1SLESDESL4
Tributary BoardPH1PO1PD1PL3
Data BoardEFT4EMS6
Power Cross Connect BoardPXC
System Communication and Control boardSCC
Fan boardFAN
IDU 605 is available in three types: IDU 605 1A, IDU 605 1B
ODUinterfacemain performance
Hybrid Couplerinterfacemain performance.
Adjust SlideAdjust Slide
8/3/2019 OptiX RTN 600 Product Introduction-A
89/90
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 88Page 88Page 88
Summary
Contents Review
Main characteristics
System Structure, Software and Hardware Structure
Board Functions and Signal flow in the IDU
ODU and Hybrid coupler Features and Functions
Equipment Level Protection Actions and Signal flow
Microwave Link Protection Actions and Signal flow
8/3/2019 OptiX RTN 600 Product Introduction-A
90/90
Thank youwww.huawei.com