MDC TrainingRosenbauer Engines

Handle Lock

Release Button

Docking platform

Docking

To Secure MDC in the docking platform:• When securing MDC in the docking platform, place top edge under

the hook then rotate bottom edge flat onto docking platform.• Pull handle lock up to lock MDC in the docking platform.

To remove MDC from docking platform:• To release, press release button and handle lock will retract.• Pull bottom edge away from docking platform first, then the MDC

will drop down and away from docking platform.

• If the MDC must be replaced, only an MDC configured for the Rosenbauers can be installed. MDCs so configured will be marked with a label.

Handle Lock

Screen dimmer

Power button

Touch Screen

• Power button on the touch screen will shut down the MDC.

• Touch screen navigation works the same as on the MDC screen itself.• Better resolution on remote screen• Better touch sensitivity

Keyboard release tab

Flexible keyboard release tab

Push the keyboard back and lift out

Keyboard platform

Troubleshooting

Remote screen should power up automatically once MDC is powered on, if it doesn’t power up automatically:MDC is not configured for the RosenbauerHardware problem with the vehicle or docking

platform