CHAPTER1 - Introduction to Engg designSabarish, Madan, Khaleel, Sai Krishna, Ronan
1. Which of the following is an Engineering Design characteristic?a) Trans-disciplinaryb) Iterativec) Neither a nor bd) Both a and b
2. What is the personal characteristic of an Engineering Designer?a) Ability to identify problemsb) Supervisory skillsc) Both a and bd) Only a
3. Which of the following is an Engineering design model?a) Pahl and Beitz b) Friedman and Stigc) Resnick and Hathwayd) Hall and Carrieck model
4. What is the 3rd stage of Pugh model?A. MarketB. Detail DesignC. Concept DesignD. Sell
5. Which of the following are internal Engineering Design Interfaces?a) Computation and purchasing b) Manufacturing and commissioningc) Computation and drawing officed) Manufacturing and development
CHAPTER1 - Introduction to Engg design
Q1) Main characteristics of Engineering Design are:
A) Trans disciplinaryB) Highly ComplexC) IterativeD) All
Q2) An Engineering Designer must be capable of dealing with:
A) The production of practical design solutionsB) The production of design requirement of a particular component, system,
assembly or installationC) Negotiations with vendors on aspects of bought out componentsD) All
Q3) The aim of the engineering design process is to support the designer by providing a _________
A) FrameworkB) MethodologyC) EitherD) None
Q4) Engineering design is a ___________ process
A) sequentialB) iterativeC) bothD) either of (A) or (B)
CHAPTER 2 – PDS Manoj Deshpande and Group
Q1) The factor which doesn’t determine the quality of the product is:
a) Consistency of components of productsb) Products should meet the requirementsc) All components should be new and free from defectsd) Weight of product should be less
Q2) Colour shape form and texture come under, which criteria?
(a) Acceptance standards(b) Operational requirements(c) Performance requirements(d) Manufacture requirements
Q3) Which are the criteria of pds?
(a) Manufacture(b) Performance(c) Interference(d) Operation
Q4) Which is not a part of disposal?
(a) Standards(b) Safety(c) Legislations(d) Company policy
Q5) Method of verification of products speed, consumption and reliability is called
(a) Inspection(b) Quality(c) Patents(d) Testing
CHAPTER 2 - PDSGiri Ganesh and group
Q1) Body of pds consists of
a) Performance requirementsb) Manufacture requirementsc) Acceptance standardsd) all of these
Q2) Which of them is not a performance requirement?
a) Functionb) Aestheticsc) Reliabilityd) Processes
Q3) Which of them is an operational requirement?
A) disposalb) Assemblyc) Maintenanced) Noise
Q4) The scope in the content of PDS consists of
a) Inclusionsb) Exclusionsc) Ranged) All of above
Q5) Which of these is not the content of PDS?
a) Referencesb) Representationc) Content listd) Definitions
CHAPTER 2 - PDS
Q1) Which of the following is not a manufacturing requirement?
A) MaterialsB) AssemblyC) Delivery dateD) Standards
CHAPTER 3 - Creativity
Q1) ________________ is mainly used to challenge all assumptions and to try to restructure any pattern
A) Vertical thinkingB) Lateral thinkingC) Psychological setD) Brainstorming
Q2) ___________ is a deliberate method for breaking out of ‘set’ thinking which involves viewing a problem from a different angle or stand point
A) AnalogyB) InversionC) FantasyD) Presentation
Q3) __________ technique, basic principle used is association of ideas:
A) Morphological analysisB) BrainstormingC) InversionD) Analogy
Q4) The opportunity for making changes or suggesting improvements to the concepts is ________ before detail design
A) lowB) highC) mediumD) average
CHAPTER 4 - Concept Selection
Coca Sai Prajeeth, Ameen, Abhinav, Aamir, Jitendra
Q1) Which of the following does not apply to the datum method?
A) + or – assigned relative to first datum.B) Criteria are taken on the vertical axis.C) Concepts are taken on the horizontal axis.D) + or – assigned relative to each other
Q2) During criteria ranking and weighing procedure which of the following doesn’t happen.
A) Criteria are reordered according to descending order ofweight.B) Criteria are reordered according to ascending order of weight.C) Criteria re reordered in no particular order.D) Total number of 1s is 0.5(n^2-n)
Q3) Which of the following is not a principle of concept selection?
A) DivergenceB) ConvergenceC) IntuitionD) Visibility
Q4) Correct formula for the number of 0’s in a BDM is:
A) 0.5n(n-1)B) n-0.5n(n-1)C) n^2 – 0.5n(n-1)D) 0.5n(n+1)
Q5) Computer aided decision making is not one of the following:
A) It is a spread sheet programB) It helps in accelerating selection procedureC) Changes can be made easilyD) It is a word program
CHAPTER 4 - Concept SelectionAjeeth and group
Q1) The concept selection stage in engineering design process is
A) DivergentB) ConvergentC) Both a & bD) None of the above
Q2) The EVAD method of concept selection was developed at
A) University of TwenteB) University of TwentyC) University of TorontoD) University of Tweety
Q3) The Harris method is to present the designer with a
A) Visual representation of decision to be made B) Quality assessment of alternating products
C) Both a & bD) None of the above
Q4) The total number of 1s in criteria ranking matrix must be equal to
A) 0.5n (n-2)B) 0.5n (2n-1)C) 0.5n (n-1)D) 0.5n (2n-2)
Q5) In EVAD method the results are entered on diagram giving an evaluation profile for each idea. The profiles are compared in a
A) Qualitative B) QuantitativeC) Both a & bD) None of the above
CHAPTER 4 - Concept Selection
Q1) Concept generation is a ___________ process
A) convergent B) divergentC) continuousD) iterative
Q2) _________ matrix is used in criteria ranking
A) SquareB) ColumnC) Binary DominanceD) Transpose
Q3) Datum method is based on what?
A) concept on one axis B) criteria on one axisC) both (A) and (B)D) none of these
Q4) Which of the following is not a formal decision making process used by engineer designer?
A) Time wasted in pursuing wrong alternatives to the detail design stage is avoided
B) Causing decision making to be visibleC) The ability to evaluate the thought processes of others is developedD) None of these
CHAPTER 5 – EMBODIMENT
Q1) Embodiment is the bridge between concept stage and _______
A. Specification stageB. Detail designC. ManufactureD. None of the above
Q2) The input to embodiment is the conceptual design sketches developed earlier and __________
A. PDSB. Form designC. Scheme drawingsD. None of the above
Q3) When attention is attracted by any visual feature such that all other feature tend to lose significance. This effect is called _________
A. Brightness ratioB. AcuityC. Figure on groundD. Illumination
Q4) Confident recognition of visual statement is important in which of the following design activity.
A. ErgonomicsB. SimulationC. AestheticsD. Optimisation
Q5) The ability to perceive details is called ____________
A. Brightness ratioB. Illumination ratioC. AestheticsD. Acuity
Q6) __________ is concerned with ways of designing machines, operations and work environments:-
A. AestheticsB. ErgonomicsC. ScalingD. None of the above
Q7) Embodiment process runs in parallel with __________
A. ModellingB. Value engineeringC. Industrial engineering aspectsD. None of the above
Q8) The _________ is the bridge between the conceptual stage of the design and detail design
A) Concept selectionB) EmbodimentC) ModellingD) None
Q9) The ____________ is biased towards ensuring useful products satisfy and appeal to their users
A) Engineer designB) Industrial designC) ErgonomicD) Aesthetic
Q10) ________ deals with user-friendly product
Q11) ________ aims for visually appealing product
Q12) _________ are drawn strictly to scale only very important dimensions
Q13) ________ model is computer based and allows dynamic
CHAPTER 6 – MODELLING
Rashmi, Madhuri, Anusha, Kirtana
Q1) One of the more widely used technique in simulation is
A) Structural analysisB) Modelling analysisC) Finite element analysisD) None of these
Q2) There can be ______ criterion function / functions
A) 1B) 2C) 3D) 4
Q3) These are always expressed as inequalities
A) Criterion functionsB) Regional constraintsC) Functional constraintsD) All of these
Q4) The first step in mathematical modelling is
A) To make assumptionsB) To replace reality with a simplified modelC) Input data is idealizedD) Definition of failure and it’s prevention
Q5) The search for the best compromise between the confliction criteria is called
A) SealingB) VisualisationC) SimplificationD) Optimisation
Chapter 6 - ModellingBy Preethi G, Archana S, Anisha Reddy, Divya R, Arpitha H
Q1) An optimization problem usually involves _____ as a functional relationship
A) Criterion Function B) Functional ConstraintC) Regional ConstraintD) All of these
Q2) The modelling method which involves creation of 2-0 and 3-0 models are
A) Mathematical modellingB) Scale modelsC) Simulation D) None of these
Q3) Which of these are not modelling principles
A) SynthesisB) IterationC) Simulation D) Scaling
Q4) Modelling is used in which stage
A) EmbodimentB) Concept selectionC) PDSD) Detail design
Q5) Which of the following factors can be established by scale models
A) AestheticsB) TechnicalC) Synthesis D) Optimization
Chapter 6 - Modelling
Q1) ________ modelling where equations are developed and tested within stated assumptions
A) OptimisticB) MathematicalC) ScaleD) Simulation
Chapter 7 – Detail Design (No ans provided)
Ashwini, Ruchi, Neha, Rama, Jomol
Q1) The general equation for factor of safety is
A) N = Load carrying capability / applied capabilityB) N = Load applying capability / Stress capabilityC) N = Nominal Stress / Max StressD) N = Load carrying capability / Ultimate strength
Q2) ________ is not a part of detail design
A) EvaluationB) Optimization C) AnalysisD) Simulation
Q3) Expansion of FMEA is
A) Failure Models and effective analysisB) Failure modes and effects analysisC) Failure mechanism and effective analysis D) Fail models and effects analysis
Q4) the factors which mustn’t be taken into account in design are
A) Mean stressB) Alternating stressC) Review D) Material ultimate tensile strength
Chapter 7 – Detail Design
Preethi Ganeshan, Archana S, Ainsha Reddy, Divya R, Arpitha H
Q1) The general equation for safety is
A) Load carrying capability / applied loadB) Applied load / load carrying capabilityC) 6L / 6rD) None of the above
Q2) Reliability is concerned with causes, _______ and _________
A) distribution and preparation of failureB) detail and predictionC) determination and predictionD) distribution and prediction
Q3) The occurrence of failure is represented by the variable ______ & is assigned a value between 1 and 10 where ____ is the highest failure rate
A) 0, 1 B) 0, 10C) 1, 10D) None of the above
Q4) Risk priority number is calculated as
A) RPN = P * O * DB) RPN = C * O * DC) RPN = S * O * BD) RPN = S * O * D
5 If a system has 100 components each with reliability of 90 % (series), find the reliability of the system
A) 2.656 * 10^-6B) 2.656 * 10^-5C) 2.656 * 10^-4 2.656 * 10^-3
Chapter 7 – Detail Design Mridula V, Prerana, Himica, Megha L, Manjana (They did CH 7 and 8 combined)
Q1) If a and b are the components of a system, given R(a) = 0.9 and R(b) = 0.9. What is the reliability of the system when in parallel?
A) 0.81B) 0.99C) 0.9D) 1.011
Q2) Reliability is defined as :
A) Measure of the degree to which it meets the customer’s requirements.B) The probability that a device or system, will operate without
failure for a given period of time.C) Ensuring that all components have appropriate factors of safety and are
not over designedD) None of the above
Chapter 8 – Design ManagementMridula V, Prerana, Himica, Megha L, Manjana (They did CH 7 and 8 combined)
Q1) Which international standard relates to quality specifications for design, development, production, installation and servicing?
A) ISO 9000B) ISO 9001C) ISO 9002D) ISO 9003
Q2) Which of the following is not an advantage of QFD
A. QFD helps to focus decisionsB. QFD provides traceability of decisionsC. QFD identifies constraints and is informativeD. QFD provides a common format for the whole project
Q3) Final review does not include:
A. Packaging and shipmentB. Post design servicesC. Cost and timescale estimatesD. Operating instructions and handbooks
Chapter 10 – Presentation Techniques
Naseer Pasha and Group
Q1) Complete the series Function---another designer--_____---free hand sketching____
A) Symbols & graphB) Graph & sketchC) Symbols & concept sketchD) Rules & graph
Q2) The most important characteristics of drawing:
A) CodeB) DecodeC) EncodeD) None
Q3) The sketching skills developed by design engineer should encompass
A) 3D imageB) Outline sketchC) 2D imageD) All the above
Q4) Which of the following doesn’t under design report______
A) PDS B) ContentsC) OptimizationD) Modelling
Q5) The main type of drawing used by designer is _______
A) Calibration drawingB) Concept sketch C) Scheme drawing D) Mathematical drawing
Chapter 10 – Presentation TechniquesAnurag, Nishant S.P, Avinash, Praveen
Q1) Design responsibility includes
(A) Detail drawings (B) Assembly drawings (C) Arrangement drawings (D) Concept sketch
Q2) Which of the following is not an important characteristic of drawing?
(A) Modelled property (B) Receiver (C) Sender (D) Code
Q3) Scheme drawing comes under
(A) Design responsibility (B) Drawing off responsibility (C) Both a & b (D) None
Q4) Project management does not include
(A) Describing the project (B) Planning control charts (C) Minutes of meeting (D) Audit