C O M P R E H E N S I V E S P E C I F I C A T I O N
R E F E R E N C E G U I D E
j u s t m a n u f a c t u r i n g j u s t m f g . c o m
JUST…the stainless source for spec series sinks and accessories
ADA Application Sinks, Faucets and Accessories
21
Undermount Sinks 2
Single Compartment Sinks 3
Double Compartment Sinks 4
Bar Sinks 5
Classroom Sinks 6-11 Faucets and Sink Bubblers
Lavatory Sinks 12-13, 16
Sink inserts 14
Wall Hung Drinking Fountains 15
Faucets 17-18
1
ADA COMPLIANT - TABLE OF CONTENTS
UNDErMOUNT ADA COMPLIANT STyLIST SErIES SINkS
Undermount ADA compliant sinks are available in the full range of Just sizes and shapes completing the most comprehensive offering of ADA undermounts available anywhere. Depth ranges 4-1/2 through 5-1/2” maximums factor in top thickness to maintain ADA compliancy. Drain location as specified: Center / Drain Center Rear / Center Left / Center Right / Right Rear or Left Rear. Produced in 18 gauge type 304 stainless steel. Also available with the New Integra Flow OverFlow System. (See page 3.)
ThE NEw INTEgrA FLOw SySTEM SINkS
The New Integra Flow system has been developed as a response to potential multi-level building flooding liability, although any environment can be safer from overflow problems. Be it a classroom, office break room, hotel suite, assisted living or dormitory, flooding can be very costly and disruptive to the occupants and maintenance personnel. Secure your specifications with the Just Integra Flow system.
The Integra Flow system is an especially effective vandal resistant preventative in an academic setting. Even residential laundry rooms are prone to the possibility of the occasional sink overflowing and all the damage that comes with it. Integra Flow sinks are available in both self rimming and undermount versions of the com-plete offering of Just sizes and product categories, including ADA compliant, Academic group, and Stylist group version Integra Flow sinks. ADA compliant sinks are especially prone to overflowing due to the shallower code compliance depths…Integra Flow systems are especially effective in these applications.
NEw!
NEw!
Tabl
e of
Con
tent
s
ADA APPLICATION SINkS, FAUCETS and ACCESSOrIES - CONTENTS
21 2
ADA COMPLIANT UNDErMOUNT SINkS - 18 gAUgE
All dimensions shown in inches.
UNDERMOUNT ADA COMPLIANT - SINGLE BOWL - 18 GAUGE Model No. O.D.1 I.D.2 *DepthUS-ADA-13518-A 13-1/2 x 18 11-1/2 x 16 4-1/2 to 5-1/2US-ADA-1414-A 14 x 14 12 x 12 4-1/2 to 5-1/2US-ADA-1616-A 16 x 16 14 x 14 4-1/2 to 5-1/2US-ADA-1618-A 16 x 18 14 x 16 4-1/2 to 5-1/2US-ADA-1620-A 16 x 20 14 x 18 4-1/2 to 5-1/2US-ADA-1818-A 18 x 18 16 x 16 4-1/2 to 5-1/2US-ADA-1821-A 18 x 21 16 x 19 4-1/2 to 5-1/2US-ADA-1824-A 18 x 24 16 x 22 4-1/2 to 5-1/2US-ADA-1830-A 18 x 30 16 x 28 4-1/2 to 5-1/2
*ThICkNESS OF COUNTEr TOP MUST BE FACTOrED IN, TO ENSUrE ADA COMPLIANCE. DEPTh rANgE OF SINk MODELS ShOwN ASSUMES 3/4” to 1” COUNTEr ThICkNESS.
US-ADA-1821-AShown with:JTR-51 faucetJHDD-2000 soap dispenserJ-ADA-35 drain system
UCIr-ADA-14Shown with: JSL-100-AC Sensor faucet, JHDD-2000 Soap dispenser and a J-115-FS grid drain.
UNDERMOUNT ADA - COMPLIANT - DOUBLE BOWL - 18 GAUGE Model No. O.D.1 I.D.2 *Depth
UD-ADA-1632-A 16 x 32 14 x 14 4-1/2 to 5-1/2UD-ADA-1832-A 18 x 32 16 x 14 4-1/2 to 5-1/2UD-ADA-1836-A 18 x 36 16 x 16 4-1/2 to 5-1/2 UD-ADA-1842-A 18 x 42 16 x 19 4-1/2 to 5-1/2UD-ADA-1848-A 18 x 48 16 x 22 4-1/2 to 5-1/2
UNDERMOUNT ADA - COMPLIANT - TRIPLE BOWL - 18 GAUGE Model No. O.D.1 I.D.2 *Depth
UT-ADA-1442-A 14 x 42 12 x 12 4-1/2 to 5-1/2UT-ADA-1848-A 18 x 48 16 x 14 4-1/2 to 5-1/2UT-ADA-1854-A 18 x 54 16 x 16 4-1/2 to 5-1/2
WITH INTEGRA-FLOW SYSTEMUDF-ADA-1632-A 16 x 32 14 x 14 4-1/2 to 5-1/2UDF-ADA-1832-A 18 x 32 16 x 14 4-1/2 to 5-1/2UDF-ADA-1836-A 18 x 36 16 x 16 4-1/2 to 5-1/2 UDF-ADA-1842-A 18 x 42 16 x 19 4-1/2 to 5-1/2UDF-ADA-1848-A 18 x 48 16 x 22 4-1/2 to 5-1/2
UD-ADA SErIES UDF-ADA SErIES
UT-ADA SErIES
�
US-ADA SErIES
4-1/2 to 5-1/2 Depth Range
4-1/2 to 5-1/2 Depth Range
TyPE 316 Most JUST Stylist 18 gauge models are available in type 316 Stainless Steel, which offers greater corrosion resistance in harsh environ-ments. See page 6.
SPECIFICATIONS - ADA COMPLIANT - 18 gAUgEJUST ADA Stylist Group A, seamless die-drawn construction of 18 gauge type 304, 18-8, stainless steel • In te ri or sur fac es polished to a non-porous Hand-Blended JUST finish, with high light ed bowl rim • Smooth, fully coated underside insulates for sound and reduces con den sa tion • Straight-sided compartment with 1 3/4” radius corners provides greater capacity • Con forms to ASME/ANSI A112.19.3M • Drain punch #35 centered at rear, for Just J-35 unless oth er wise specified
WITH INTEGRA-FLOW SYSTEMUSF-ADA-13518-A 13-1/2 x 18 11-1/2 x 16 4-1/2 to 5-1/2USF-ADA-1414-A 14 x 14 12 x 12 4-1/2 to 5-1/2USF-ADA-1616-A 16 x 16 14 x 14 4-1/2 to 5-1/2USF-ADA-1618-A 16 x 18 14 x 16 4-1/2 to 5-1/2USF-ADA-1620-A 16 x 20 14 x 18 4-1/2 to 5-1/2USF-ADA-1818-A 18 x 18 16 x 16 4-1/2 to 5-1/2USF-ADA-1821-A 18 x 21 16 x 19 4-1/2 to 5-1/2USF-ADA-1824-A 18 x 24 16 x 22 4-1/2 to 5-1/2USF-ADA-1830-A 18 x 30 16 x 28 4-1/2 to 5-1/2
USF-ADA SErIES
INTEgrAL O
VErF
LOw
SySTEM
ADA COMPLIANT - CIRCULAR LAVATORY BOWL LESS OVERFLOW - 18 GAUGE Model No. O.D.1 I.D.2 DepthUCIR-ADA-10 12-1/4 10 5UCIR-ADA-12 14-1/4 12 6UCIR-ADA-14 16-1/4 14 5-1/4UCIR-ADA-16 18-1/4 16 5-1/2
UCIF-ADA-10 12-1/4 10 5UCIF-ADA-12 14-1/4 12 6UCIF-ADA-14 16-1/4 14 5-1/4UCIF-ADA-16 18-1/4 16 5-1/2
1 O.D. - Overall Dimensions 2 I.D. - Inside Dimensions
UCIF-ADA SErIESUCIr-ADA SErIESWITH OVERFLOW
4-1/2 to 5-1/2 Depth Range
5 to 6 Depth Range
NEw!
NEw!
Bowl depths available 4-1/2” Through 5-1/2”, in 1/2” increments. Specify depth. Specify drain location on all ADA Compliant sinks: center / center left / center right / left rear / right rear or center rear location. Un less otherwise spec i fied drain lo ca tion is cen tered at rear of bowl.
NEw!
NEw!
With Integra Flow
With Integra Flow
ADA Compliant
INTEgrAL O
VErF
LOw
SySTEM
43 43All dimensions shown in inches.
STyLIST grOUP ADA COMPLIANT SINgLE COMPArTMENT LEDgEBACk • NO LEDgE 18 gAUgE
SPECIFICATIONS - STyLIST grOUP A - 18 gAUgE• JUST ADA Stylist Group A, seamless die-drawn construction
of 18 gauge type 304, 18-8, stainless steel • In te ri or sur fac es polished to a non-porous Hand-Blended
JUST finish, with high light ed bowl rim • Smooth, fully coated underside insulates for sound and
reduces con den sa tion • Straight-sided compartment with 1 3/4” radius corners
provides greater capacity • Self-rimming top mount Grip-Rim Plus with 300 series
stainless steel mounting channels • Con forms to ASME/ANSI A112.19.3M • Drain punch #35 centered at rear for Just J-35 unless
oth er wise specified
1 O.D. - Overall Dimensions (Front-to-Back X Left-to-Right)2 I.D. - Inside Dimensions (Front-to-Back X Left-to-Right)3 Faucet flange 3-1/2 4 Side flanges 2-1/2 5 Drain punched centered
ADA COMPLIANT - SINGLE BOWL - 18 GAUGE - LEDGEBACK Model No. O.D.1 I.D.2 DepthSL-ADA-1613-A-GR5 16 x 13 10 x 10 4-1/2 to 6-1/2SL-ADA-1617-A-GR 16 x 17 10 x 14 4-1/2 to 6-1/2SL-ADA-17519-A-GR 17-1/2 x 19 11-1/2 x 16 4-1/2 to 6-1/2SL-ADA-1815-A-GR 18 x 15 12 x 12 4-1/2 to 6-1/2SL-ADA-1921-A-GR 19 x 21 14 x 18 4-1/2 to 6-1/2SL-ADA-2017-A-GR 20 x 17 14 x 14 4-1/2 to 6-1/2SL-ADA-2019-A-GR 20 x 19 14 x 16 4-1/2 to 6-1/2SL-ADA-2117-A-GR3 21 x 17 16 x 14 4-1/2 to 6-1/2SL-ADA-2119-A-GR3 21 x 19 16 x 16 4-1/2 to 6-1/2SL-ADA-2122-A-GR3 21 x 22 16 x 19 4-1/2 to 6-1/2SL-ADA-2125-A-GR3 21 x 25 16 x 22 4-1/2 to 6-1/2SL-ADA-2131-A-GR3 21 x 31 16 x 28 4-1/2 to 6-1/2SL-ADA-2133-A-GR3-4 21 x 33 16 x 28 4-1/2 to 6-1/2SL-ADA-22145-A-GR 22 x 14-1/2 16 x 11-1/2 4-1/2 to 6-1/2SL-ADA-2217-A-GR 22 x 17 16 x 14 4-1/2 to 6-1/2SL-ADA-2219-A-GR 22 x 19 16 x 16 4-1/2 to 6-1/2SL-ADA-2222-A-GR 22 x 22 16 x 19 4-1/2 to 6-1/2SL-ADA-2225-A-GR 22 x 25 16 x 22 4-1/2 to 6-1/2SL-ADA-2231-A-GR 22 x 31 16 x 28 4-1/2 to 6-1/2SL-ADA-2233-A-GR4 22 x 33 16 x 28 4-1/2 to 6-1/2
ADA COMPLIANT - SINGLE BOWL - 18 GAUGE - NO LEDGE Model No. O.D.1 I.D.2 DepthS-ADA-1313-A-GR5 13 x 13 10 x 10 4-1/2 to 6-1/2
S-ADA-14519-A-GR 14-1/2 x 19 11-1/2 x 16 4-1/2 to 6-1/2
S-ADA-1515-A-GR 15 x 15 12 x 12 4-1/2 to 6-1/2
S-ADA-1717-A-GR 17 x 17 14 x 14 4-1/2 to 6-1/2
S-ADA-1719-A-GR 17 x 19 14 x 16 4-1/2 to 6-1/2
S-ADA-1721-A-GR 17 x 21 14 x 18 4-1/2 to 6-1/2
S-ADA-1917-A-GR 19 x 17 16 x 14 4-1/2 to 6-1/2
S-ADA-1919-A-GR 19 x 19 16 x 16 4-1/2 to 6-1/2
S-ADA-1922-A-GR 19 x 22 16 x 19 4-1/2 to 6-1/2
S-ADA-1925-A-GR 19 x 25 16 x 22 4-1/2 to 6-1/2
WITH INTEGRA-FLOW SYSTEMSLF-ADA-1613-A-GR5 16 x 13 10 x 10 4-1/2 to 6-1/2SLF-ADA-1617-A-GR 16 x 17 10 x 14 4-1/2 to 6-1/2SLF-ADA-17519-A-GR 17-1/2 x 19 11-1/2 x 16 4-1/2 to 6-1/2SLF-ADA-1815-A-GR 18 x 15 12 x 12 4-1/2 to 6-1/2SLF-ADA-1921-A-GR 19 x 21 14 x 18 4-1/2 to 6-1/2SLF-ADA-2017-A-GR 20 x 17 14 x 14 4-1/2 to 6-1/2SLF-ADA-2019-A-GR 20 x 19 14 x 16 4-1/2 to 6-1/2SLF-ADA-2117-A-GR3 21 x 17 16 x 14 4-1/2 to 6-1/2SLF-ADA-2119-A-GR3 21 x 19 16 x 16 4-1/2 to 6-1/2SLF-ADA-2122-A-GR3 21 x 22 16 x 19 4-1/2 to 6-1/2SLF-ADA-2125-A-GR3 21 x 25 16 x 22 4-1/2 to 6-1/2SLF-ADA-2131-A-GR3 21 x 31 16 x 28 4-1/2 to 6-1/2SLF-ADA-2133-A-GR3-4 21 x 33 16 x 28 4-1/2 to 6-1/2SLF-ADA-22145-A-GR 22 x 14-1/2 16 x 11-1/2 4-1/2 to 6-1/2SLF-ADA-2217-A-GR 22 x 17 16 x 14 4-1/2 to 6-1/2SLF-ADA-2219-A-GR 22 x 19 16 x 16 4-1/2 to 6-1/2SLF-ADA-2222-A-GR 22 x 22 16 x 19 4-1/2 to 6-1/2SLF-ADA-2225-A-GR 22 x 25 16 x 22 4-1/2 to 6-1/2SLF-ADA-2231-A-GR 22 x 31 16 x 28 4-1/2 to 6-1/2SLF-ADA-2233-A-GR4 22 x 33 16 x 28 4-1/2 to 6-1/2
WITH INTEGRA-FLOW SYSTEMSF-ADA-1313-A-GR5 13 x 13 10 x 10 4-1/2 to 6-1/2
SF-ADA-14519-A-GR 14-1/2 x 19 11-1/2 x 16 4-1/2 to 6-1/2
SF-ADA-1515-A-GR 15 x 15 12 x 12 4-1/2 to 6-1/2
SF-ADA-1717-A-GR 17 x 17 14 x 14 4-1/2 to 6-1/2
SF-ADA-1719-A-GR 17 x 19 14 x 16 4-1/2 to 6-1/2
SF-ADA-1721-A-GR 17 x 21 14 x 18 4-1/2 to 6-1/2
SF-ADA-1917-A-GR 19 x 17 16 x 14 4-1/2 to 6-1/2
SF-ADA-1919-A-GR 19 x 19 16 x 16 4-1/2 to 6-1/2
SF-ADA-1922-A-GR 19 x 22 16 x 19 4-1/2 to 6-1/2
SF-ADA-1925-A-GR 19 x 25 16 x 22 4-1/2 to 6-1/2
SL-ADA-1921-A-gr-T
SL-ADA SErIES 18 gAUgE
BOWL DEPTHS AVAILABLE 4-1/2” THROUGH 6-1/2”, IN 1/2” INCREMENTS. SPECIFY DEPTH.SPECIFY DRAIN LOCATIONS FOR ADA COMPLIANT SINKS: CEN TER, LEFT REAR, RIGHT REAR OR CENTER REAR.
Includes: JTR-51-W4 ADA Compliant Faucet, J-ADA-35 Drain system
S-ADA SErIES 18 gAUgE
TyPE 316 Most JUST Stylist 18 gauge models are available in type 316 Stainless Steel, which offers greater corrosion resistance in harsh environments. See page 6.
Shown with: J-ADA-35 Drain system
S-ADA-1922-A-gr
SF-ADA SErIES
NEw!
NEw!
SLF-ADA SErIES
With Integra Flow
With Integra Flow
ADA
Com
plia
nt
INTEgrAL O
VErF
LOw
SySTEM
INTEgrAL O
VErF
LOw
SySTEM
43 43
STyLIST grOUP ADA COMPLIANT DOUBLE COM PArT MENT LEDgEBACk 18 gAUgE
SPECIFICATIONS - ADA COMPLIANT - 18 gAUgEJUST ADA Stylist Group A, seamless die-drawn construction of 18 gauge type 304, 18-8, stainless steel • In te ri or sur fac es polished to a non-porous Hand-Blended JUST finish, with high light ed bowl rim • Smooth, fully coated underside insulates for sound and reduces con den sa tion • Straight-sided compartment with 1 3/4” radius corners provides greater capacity • Self-rimming top mount Grip-Rim Plus with 300 series stainless steel mounting chan-nels • Con forms to ASME/ANSI A112.19.3M • Drain punch #35 centered at rear, for Just J-35 unless oth er wise specified
DL-ADA-2243-A-gr-T
ADA COMPLIANT - DOUBLE BOWL - 18 GAUGE Model No. O.D.1 I.D.2 DepthDL-ADA-1625-A-GR 16 x 25 10 x 10 4-1/2 to 6-1/2DL-ADA-17537-A-GR 17-1/2 x 37 11-1/2 x 16 4-1/2 to 6-1/2DL-ADA-1829-A-GR 18 x 29 12 x 12 4-1/2 to 6-1/2DL-ADA-1925-A-GR3 19 x 25 14 x 10 4-1/2 to 6-1/2DL-ADA-1933-A-GR3-4 19 x 33 14 x 14 4-1/2 to 6-1/2 DL-ADA-2025-A-GR 20 x 25 14 x 10 4-1/2 to 6-1/2 DL-ADA-2037-A-GR 20 x 37 14 x 16 4-1/2 to 6-1/2 DL-ADA-2128-A-GR3 21 x 28 16 x 11-1/2 4-1/2 to 6-1/2 DL-ADA-2133-A-GR3-4 21 x 33 16 x 14 4-1/2 to 6-1/2 DL-ADA-2137-A-GR3 21 x 37 16 x 16 4-1/2 to 6-1/2 DL-ADA-2143-A-GR3 21 x 43 16 x 19 4-1/2 to 6-1/2 DL-ADA-2228-A-GR 22 x 28 16 x 11-1/2 4-1/2 to 6-1/2 DL-ADA-2233-A-GR4 22 x 33 16 x 14 4-1/2 to 6-1/2 DL-ADA-2237-A-GR 22 x 37 16 x 16 4-1/2 to 6-1/2 DL-ADA-2243-A-GR 22 x 43 16 x 19 4-1/2 to 6-1/2 DL-ADA-2249-A-GR 22 x 49 16 x 22 4-1/2 to 6-1/2 DL-ADA-2261-A-GR 22 x 61 16 x 28 4-1/2 to 6-1/2
ADA COMPLIANT - W/O FAUCET LEDGE - TRIPLE BOWL - 18 GAUGE Model No. O.D.1 I.D.2 DepthT-ADA-1543-A-GR 15 x 43 12 x 12 4-1/2 to 6-1/2T-ADA-1949-A-GR 19 x 49 16 x 14 4-1/2 to 6-1/2
ADA COMPLIANT - WITH FAUCET LEDGE - TRIPLE BOWL - 18 GAUGE Model No. O.D.1 I.D.2 DepthTL-ADA-1843-A-GR 18 x 43 12 x 12 4-1/2 to 6-1/2TL-ADA-2249-A-GR 22 x 49 16 x 14 4-1/2 to 6-1/2TL-ADA-2255-A-GR 22 x 55 16 x 16 4-1/2 to 6-1/2
WITH INTEGRA-FLOW SYSTEMDLF-ADA-1625-A-GR 16 x 25 10 x 10 4-1/2 to 6-1/2DLF-ADA-17537-A-GR 17-1/2 x 37 11-1/2 x 16 4-1/2 to 6-1/2DLF-ADA-1829-A-GR 18 x 29 12 x 12 4-1/2 to 6-1/2DLF-ADA-1925-A-GR3 19 x 25 14 x 10 4-1/2 to 6-1/2DLF-ADA-1933-A-GR3-4 19 x 33 14 x 14 4-1/2 to 6-1/2 DLF-ADA-2025-A-GR 20 x 25 14 x 10 4-1/2 to 6-1/2 DLF-ADA-2037-A-GR 20 x 37 14 x 16 4-1/2 to 6-1/2 DLF-ADA-2128-A-GR3 21 x 28 16 x 11-1/2 4-1/2 to 6-1/2 DLF-ADA-2133-A-GR3-4 21 x 33 16 x 14 4-1/2 to 6-1/2 DLF-ADA-2137-A-GR3 21 x 37 16 x 16 4-1/2 to 6-1/2 DLF-ADA-2143-A-GR3 21 x 43 16 x 19 4-1/2 to 6-1/2 DLF-ADA-2228-A-GR 22 x 28 16 x 11-1/2 4-1/2 to 6-1/2 DLF-ADA-2233-A-GR4 22 x 33 16 x 14 4-1/2 to 6-1/2 DLF-ADA-2237-A-GR 22 x 37 16 x 16 4-1/2 to 6-1/2 DLF-ADA-2243-A-GR 22 x 43 16 x 19 4-1/2 to 6-1/2 DLF-ADA-2249-A-GR 22 x 49 16 x 22 4-1/2 to 6-1/2 DLF-ADA-2261-A-GR 22 x 61 16 x 28 4-1/2 to 6-1/2
Bowl depths available 4-1/2” Through 6-1/2”, in 1/2” increments. Specify depth. Specify drain location on all ADA Compliant sinks: center / center left / center right / left rear / right rear or center rear location. Un less otherwise spec i fied drain lo ca tion is cen tered at rear of bowl.
1 O.D. - Overall Dimensions (Front-to-Back X Left-to-Right)2 I.D. - Inside Dimensions (Front-to-Back X Left-to-Right)3 Faucet flange 3-1/2. 4 Side flanges 1-15/16. Partition 1-1/8.
Includes:(1) J-1174-KS ADA Compliant Faucet(2) J-ADA-35 Drain system
DL-ADA SErIES
TyPE 316 Most JUST Stylist 18 gauge models are available in type 316 Stainless Steel, which offers greater corrosion resistance in harsh environments. See page 6.
TL-ADA SErIES 18 gAUgET-ADA SErIES 18 gAUgE
D-ADA SErIES
Shown with: 2, J-35 DrainsD-ADA-1933-A-gr
D-ADA-1325-A-GR 13 x 25 10 x 10 4-1/2 to 6-1/2 D-ADA-1529-A-GR 15 x 29 12 x 12 4-1/2 to 6-1/2 D-ADA-1933-A-GR 19 x 33 16 x 14 4-1/2 to 6-1/2 D-ADA-1937-A-GR 19 x 37 16 x 16 4-1/2 to 6-1/2 D-ADA-1943-A-GR 19 x 43 16 x 19 4-1/2 to 6-1/2 D-ADA-1949-A-GR 19 x 49 16 x 22 4-1/2 to 6-1/2
DOUBLE BOWL - 18 GAUGE - STANDARD DEPTH Model No. O.D.1 I.D.2 Depth
DF-ADA-1325-A-GR 13 x 25 10 x 10 4-1/2 to 6-1/2 DF-ADA-1529-A-GR 15 x 29 12 x 12 4-1/2 to 6-1/2 DF-ADA-1933-A-GR 19 x 33 16 x 14 4-1/2 to 6-1/2 DF-ADA-1937-A-GR 19 x 37 16 x 16 4-1/2 to 6-1/2 DF-ADA-1943-A-GR 19 x 43 16 x 19 4-1/2 to 6-1/2 DF-ADA-1949-A-GR 19 x 49 16 x 22 4-1/2 to 6-1/2
WITH INTEGRA-FLOW SYSTEM
NEw!
NEw!
ADA Compliant
INTEgrAL O
VErF
LOw
SySTEM
INTEgrAL O
VErF
LOw
SySTEM
TrIPLE COMPArTMENT
65 65
ADA COMPLIANT BAr SINkS 18 gAUgE
SPECIFICATIONS - CONgENIALITy grOUP A - 18 gAUgE• JUST Congeniality Group A, seamless die-drawn construction of 18 gauge type 304, 18-8, stainless steel • In te ri or sur fac es polished to a non-porous Hand-Blended JUST finish, with high light ed bowl rim • Smooth fully coated underside insulates for sound and reduces con den sa tion • Straight-sided sink bowl with 1 3/4” radius corners provides greater capacity • Self-rimming top mount Grip-Rim Plus with 300 series stainless steel mounting channels • Con forms to ASME/ANSI A112.19.3M • Drain punch #15 for Just J-15 unless oth er wise specified
Includes: JGN-740 Faucet, J-15-FS Drain
SBL-ADA-1815-A-gr-TIncludes: JGN-5 Faucet, J-15-FS Drains
DBL-ADA-1823-A gr-T
SBL-ADA-1515-A-GR 15 x 15 9 x 12 6 SBL-ADA-1613-A-GR 16 x 13 10 x 10 4-1/2 to 6-1/2 SBL-ADA-1812-A-GR 18 x 12 12 x 9 6 SBL-ADA-1815-A-GR 18 x 15 12 x 12 4-1/2 to 6-1/2 BLSM-ADA-13519-A-GR* 13-1/2 x 19 7-1/2 x 16 5-1/4
BAR SINKS - SINGLE BOWL - LEDGEBACK - 18 GAUGE
Model No. O.D.1 I.D.2 Depth
SB-ADA-1215-A-GR 12 x 15 9 x 12 6 SB-ADA-1515-A-GR 15 x 15 12 x 12 4-1/2 to 6-1/2
BAR SINKS - SINGLE BOWL - NO LEDGE - 18 GAUGE
Model No. O.D.1 I.D.2 Depth
DBL-ADA-1529-A-GR 15 x 29 9 x 12 6 DBL-ADA-1823-A-GR 18 x 23 12 x 9 6
BAR SINKS - OFFSET & DOUBLE BOWL - LEDGEBACK - 18 GAUGE
Model No. O.D.1 I.D.2 Depth
SB-ADA SErIES
SBL-ADA SErIES
BLSM-ADA-13519
DBL-ADA SErIES
SBLF-ADA-1515-A-GR 15 x 15 9 x 12 6 SBLF-ADA-1613-A-GR 16 x 13 10 x 10 4-1/2 to 6-1/2 SBLF-ADA-1812-A-GR 18 x 12 12 x 9 6 SBLF-ADA-1815-A-GR 18 x 15 12 x 12 4-1/2 to 6-1/2 BLSMF-ADA-13519-A-GR* 13-1/2 x 19 7-1/2 x 16 5-1/4
WITH INTEGRA-FLOW SYSTEM
SBF-ADA-1215-A-GR 12 x 15 9 x 12 6 SBF-ADA-1515-A-GR 15 x 15 12 x 12 4-1/2 to 6-1/2
WITH INTEGRA-FLOW SYSTEM
DBLF-ADA-1529-A-GR 15 x 29 9 x 12 6 DBLF-ADA-1823-A-GR 18 x 23 12 x 9 6
WITH INTEGRA-FLOW SYSTEM
* 2 3/4 radius corners
NEw!
NEw!
NEw!
1 O.D. - Overall Dimensions (Front-to-Back X Left-to-Right)2 I.D. - Inside Dimensions (Front-to-Back X Left-to-Right)
The addition of mo lyb de num and increased nickel content makes these sinks even more resistant to corrosion caused by acids and other chemicals, as well as excellent resistance to oxidation. All are furnished with Stainless Steel grip-rim Plus self-rimming chan nels. Un der side of bowls is com-pletely sound deadened. rear center punched for J-35 cup strainer, unless oth er wise specified.
OPTION: TyPE 316 MODELS - grEATEr COrrOSION rESISTANCE - 18 gAUgE ONLy
Deck mounted washerless mixing faucet with 8” reach, brass swing spout. J-907 identical to J-906 except includes spray with hose.
J-906 JgN-740
Deck mount single hole gooseneck faucet with 4-15/16” reach, rigid spout and 2.2 GPM flow re strict ing aer a tor. Handles are indexed “H” & “C”. Deck to top of spout 11-15/32”. Deck to aerator 8-15/32”. Options: w4, w6, P, C, B, JrS, Vr-A, Vr-h.
J-15-FS Chrome plated brass drain with flat grid strainer. 1-1/2” O.D. chrome plated tailpiece, 4” long.
J-15-CC Stainless steel crumb cup strainer with removable bas ket and 1-1/2” O.D. chrome plat ed tail piece, 4” long.
J-15-CC J-15-FS
ADA
Com
plia
nt
INTEgrAL O
VErF
LOw
SySTEM
INTEgrAL O
VErF
LOw
SySTEM
INTEgrAL O
VErF
LOw
SySTEM
65 65
ADA COMPLIANT CLASSrOOM SINkS
CrB-ADA- SErIES
CrAF-ADA-1923-A-gr-T
Bowl depths available 4-1/2” Through 6-1/2”, in 1/2” increments. Specify depth. Specify drain location on all ADA Compliant sinks: center / center left / center right / left rear / right rear or center rear location. Un less otherwise spec i fied drain lo ca tion is cen tered at rear of bowl.
FAUCET LEDGE LEFT/ BUBBLER LEDGE RIGHT - 20 GAUGEDRAIN LOCATION: CENTER ONLY
Model No. O.D.1 I.D.2 DepthCRA-ADA-1725-B-GR 17x25 14x16 6-1/2
FAUCET LEDGE REAR/BUBBLER LEDGE RIGHT - 18 GAUGE Model No. O.D.1 I.D.2 DepthCRB-ADA-2022-A-GR 20 x 22 14 x 16 4-1/2 to 6-1/2CRB-ADA-2220-A-GR 22 x 20 16 x 14 4-1/2 to 6-1/2CRB-ADA-2225-A-GR 22 x 25 16 x 19 4-1/2 to 6-1/2
FAUCET LEDGE LEFT/ BUBBLER LEDGE RIGHT - 18 GAUGE Model No. O.D.1 I.D.2 Depth CRA-ADA-1725-A-GR 17 x 25 14 x 16 4-1/2 to 6-1/2 CRA-ADA-1923-A-GR 19 x 23 16 x 14 4-1/2 to 6-1/2CRA-ADA-1928-A-GR 19 x 28 16 x 19 4-1/2 to 6-1/2CRA-ADA-1931-A-GR 19 x 31 16 x 22 4-1/2 to 6-1/2CRA-ADA-2225-A-GR 22 x 25 19 x 16 4-1/2 to 6-1/2
CrA-ADA- SErIES
TyPE 316 Most JUST Stylist 18 gauge models are available in type 316 Stainless Steel, which offers greater corrosion resistance in harsh environ-ments. See page 6.
VANDAL RE SIS TANT
VR
SPECIFICATIONS - ACADEMIC grOUP A - 18 gAUgEJUST ADA Academic Group A, seamless die-drawn construction of 18 gauge type 304, 18-8, stainless steel • In te ri or sur fac es polished to a non-porous Hand-Blended JUST finish, with high light ed bowl rim • Smooth, fully coated underside insulates for sound and reduces con den sa tion • Straight-sided compartment with 1 3/4” radius corners provides greater capacity • Self-rimming top mount Grip-Rim Plus with 300 series stainless steel mounting channels • Con forms to ASME/ANSI A112.19.3M • Drain punch #35 centered at rear, for Just J-35 unless oth er wise specified
WITH INTEGRA-FLOW SYSTEMCRBF-ADA-2022-A-GR 20 x 22 14 x 16 4-1/2 to 6-1/2CRBF-ADA-2220-A-GR 22 x 20 16 x 14 4-1/2 to 6-1/2CRBF-ADA-2225-A-GR 22 x 25 16 x 19 4-1/2 to 6-1/2
WITH INTEGRA-FLOW SYSTEM CRAF-ADA-1725-A-GR 17 x 25 14 x 16 4-1/2 to 6-1/2 CRAF-ADA-1923-A-GR 19 x 23 16 x 14 4-1/2 to 6-1/2CRAF-ADA-1928-A-GR 19 x 28 16 x 19 4-1/2 to 6-1/2CRAF-ADA-1931-A-GR 19 x 31 16 x 22 4-1/2 to 6-1/2CRAF-ADA-2225-A-GR 22 x 25 19 x 16 4-1/2 to 6-1/2
CrAF-ADA SErIES
CrBF-ADA SErIES
All dimensions shown in inches.
1 O.D. - Overall Dimensions (Front-to-Back X Left-to-Right)2 I.D. - Inside Dimensions (Front-to-Back X Left-to-Right)3 Suffix “L” or “R” indicates location of faucet ledge
CrA-ADA-1725-A-gr
VANDAL RE SIS TANT
VR
100% ALL STAINLESS STEEL PACKAGE
Includes: JSFVr-5 Stainless Steel Vandal resistant Faucet, JSB-10-FLX-VR Flexible mouthguard vandal resistant bubbler, J-ADA-35 Drain system, intergral overflow.
100% ALL STAINLESS STEEL PACKAGE
Shown with: JSFVr-5 Stainless Steel Vandal resistant Faucet, JSB-10-FLX-VR Flexible mouthguard vandal resistant bubbler, J-ADA-35 Drain system
NEw!
NEw!
With Integra Flow With Integra Flow
Flexible Anti-microbialMouthguardwith self closing push button. see page 9.
NEw!
ADA Compliant Classroom
Sinks
INTEgrAL O
VErF
LOw
SySTEM
INTEgrAL O
VErF
LOw
SySTEM
87 87
ADA COMPLIANT CLASSrOOM SINkS
All dimensions shown in inches.1 O.D. - Overall Dimensions (Front-to-Back X Left-to-Right)2 I.D. - Inside Dimensions (Front-to-Back X Left-to-Right)3 Suffix “L” or “R” indicates location of faucet ledge
Bowl depths available 4-1/2” Through 6-1/2”, in 1/2” increments. Specify depth. Specify drain location on all ADA Compliant sinks: center / center left / center right / left rear / right rear or center rear location. Un less otherwise spec i fied drain lo ca tion is cen tered at rear of bowl.
CrDF-ADA-2228-A-gr-T
FAUCET REAR, HANDLES LEFT, BUBBLER LEDGE RIGHT, 18 GAUGE - WITH FITTINGS Model No. O.D.1 I.D.2 DepthCRD-ADA-2228-A-GR-T 22 x 28 16x19 4-1/2 to 6-1/2
FAUCET LEDGE REAR/BUBBLER LEDGE LEFT - 18 GAUGE Model No. O.D.1 I.D.2 DepthCRC-ADA-2022-A-GR 20 x 22 14 x 16 4-1/2 to 6-1/2CRC-ADA-2220-A-GR 22 x 20 16 x 14 4-1/2 to 6-1/2CRC-ADA-2225-A-GR 22 x 25 16 x 19 4-1/2 to 6-1/2
CrD-ADA-2228-A-gr-T
CrC-ADA- SErIES
TyPE 316 Most JUST Stylist 18 gauge models are available in type 316 Stainless Steel, which offers greater corrosion resistance in harsh environ-ments. See page 6.
SPECIFICATIONS - ACADEMIC grOUP A - 18 gAUgEJUST ADA Academic Group A, seamless die-drawn construction of 18 gauge type 304, 18-8, stainless steel • In te ri or sur fac es polished to a non-porous Hand-Blended JUST finish, with high light ed bowl rim • Smooth, fully coated underside insulates for sound and reduces con den sa tion • Straight-sided compartment with 1 3/4” radius corners provides greater capacity • Self-rimming top mount Grip-Rim Plus with 300 series stainless steel mounting channels • Con forms to ASME/ANSI A112.19.3M • Drain punch #35 centered at rear, for Just J-35 unless oth er wise specified
WITH INTEGRA-FLOW SYSTEMCRDF-ADA-2228-A-GR-T 22 x 28 16x19 4-1/2 to 6-1/2
WITH INTEGRA-FLOW SYSTEMCRSF-ADA-1722-A-GR-L3 or R 17 x 22 14 x 16 4-1/2 to 6-1/2CRSF-ADA-1925-A-GR-L3 or R 19 x 25 16 x 19 4-1/2 to 6-1/2CRSF-ADA-1928-A-GR-L3 or R 19 x 28 16 x 22 4-1/2 to 6-1/2CRSF-ADA-2222-A-GR-L3 or R 22 x 22 19 x 16 4-1/2 to 6-1/2
WITH INTEGRA-FLOW SYSTEMCRCF-ADA-2022-A-GR 20 x 22 14 x 16 4-1/2 to 6-1/2CRCF-ADA-2220-A-GR 22 x 20 16 x 14 4-1/2 to 6-1/2CRCF-ADA-2225-A-GR 22 x 25 16 x 19 4-1/2 to 6-1/2
CrDF-ADA-2228-A-gr-T
CrSF-ADA-L SErIESCrCF-ADA SErIES
INTEgrAL O
VErFL
Ow
SySTEM
INTEgrAL O
VErFL
Ow
SySTEM
CRDF-ADA-2228-A-GR-T Includes the following fittings: JOL-400-M Faucet with remote wrist blade handles. JSB-10-Vr Stainless Steel Bubbler. J-ADA-35 Drain system, intergral overflow.
NEw!
NEw!
NEw!
With Integra Flow With Integra Flow
With Integra Flow
INTEgrAL O
VErF
LOw
SySTEM
Optional single hangle commercial grade J-990-LS-R single handle in lieu of the JOL-400-M Specify as such.
J-990-LS-r 70º restricted Spout
Hi arc swivel gooseneck commercial grade remote single handle faucet. Stainless steel ball operation with 7-3/8” reach and 11” high spout. 70º restricted swing spout. Less spray. Finish: PVD Chrome. Vandal Resistant.Extended Stainless Steel flex lines with factory provided mounting tool for faster, easier installation. 2.2 GPM aerator.
CrD SErIES FAUCET OPTION
NEw!
ADA
Com
plia
nt C
lass
room
Sin
ks
FAUCET AND BUBBLER LEDGE - 18 GAUGE SPECIFY LEFT OR RIGHT Model No. O.D.1 I.D.2 DepthCRS-ADA-1722-A-GR-L3 or R 17 x 22 14 x 16 4-1/2 to 6-1/2CRS-ADA-1925-A-GR-L3 or R 19 x 25 16 x 19 4-1/2 to 6-1/2CRS-ADA-1928-A-GR-L3 or R 19 x 28 16 x 22 4-1/2 to 6-1/2CRS-ADA-2222-A-GR-L3 or R 22 x 22 19 x 16 4-1/2 to 6-1/2
87 87
ALL STAINLESS STEEL
ADA COMPLIANT DrAIN SySTEMS
VANDAL rESISTANT DrAINS
JSB-10-FLX-Vr
J-ADA-35
J-ADA-35-SSF-Vr
Flexible anti-microbial mouthguard self closing push button vandal resistant bub bler. Totally Lead Free con struc tion of type 304 stainless steel. Re place able stain less steel car tridge. Ad just able flow reg u la tor. 1/2-14 NPS shank. High ly buffed finish. Vandal resistant pin helps pre vent turn ing of fix ture. NSF.61 approved.
Stainless steel #35 flat grid vandal resistant drain. In cludes 1-1/2” O.D. stain-less steel tailpiece 4” long.
VANDAL RE SIS TANT
VR
VANDAL RE SIS TANT
VR
Stainless steel cup strainer with removable stain less steel bas ket. 1-1/2” O.D. 17 gauge chrome plated brass offset tailpiece system.
Vandal resistant sink models shown on page 16
Deck mounted single handle ADA Compliant faucet. Features include all stainless steel body, spout, handle and supply pipe and ceramic disc cartridge. Polished stainless mirror finish. Aerator integral to spout and vandal resistant. Aerator removable with proprietary fau-cet wrench. Deck to top of spout 14”. Deck to aer a tor 9-3/4”.
JSFVr-5
CLASSrOOM FAUCET
CLASSrOOM SINk BUBBLEr
NEw!
NEw! Flexible Anti-microbialMouthguardwith self closing push button.
ADA Compliant Classroom
Sinks
ADA COMPLIANT CLASSrOOM SINkS FOr MODULAr ENVIrONMENTS
All dimensions shown in inches.
SPECIFICATIONS - ACADEMIC grOUP A - 18 gAUgE• JUST ADA Academic Group A, seamless die-drawn construction of 18 gauge
type 304, 18-8, stainless steel • In te ri or sur fac es polished to a non-porous Hand-Blended JUST finish, with
high light ed bowl rim • Smooth fully coated underside insulates for sound and reduces con den sa-
tion • Straight-sided sink bowl with 1 3/4” radius corners provides greater capacity • Self-rimming top mount Grip-Rim Plus with 300 series stainless steel mount-
ing channels • Con forms to ASME/ANSI A112.19.3M • Drain punched #35 centered at rear, for Just J-35 unless oth er wise specified
1 O.D. - Overall Dimensions (Front-to-Back X Left-to-Right)2 I.D. - Inside Dimensions (Front-to-Back X Left-to-Right)3 Drain punched centered.
CRA-ADA-1521-A-GR 15 x 21 12 x 12 4-1/2 to 6-1/2 CRA-ADA-14525-A-GR3 14-1/2 x 25 11-1/2 x 16 4-1/2 to 6-1/2 CRA-ADA-1723-A-GR 17 x 23 14 x 14 4-1/2 to 6-1/2 CRA-ADA-1925-A-GR 19 x 25 16 x 16 4-1/2 to 6-1/2
FAUCET LEDGE LEFT/BUBBLER LEDGE RIGHT - 18 GAUGE Model No. O.D.1 I.D.2 Depth
CRAF-ADA-1521-A-GR 15 x 21 12 x 12 4-1/2 to 6-1/2 CRAF-ADA-14525-A-GR3 14-1/2 x 25 11-1/2 x 16 4-1/2 to 6-1/2 CRAF-ADA-1723-A-GR 17 x 23 14 x 14 4-1/2 to 6-1/2 CRAF-ADA-1925-A-GR 19 x 25 16 x 16 4-1/2 to 6-1/2
WITH INTEGRA-FLOW SYSTEM
TyPE 316 Most JUST Stylist 18 gauge models are available in type 316 Stainless Steel, which offers greater corrosion resistance in harsh environ-ments. See page 6.
Includes: JSFVr-5 Stainless Steel Faucet, JSB-10-FLX-VR Flexible mouthguard Stainless Steel
bubbler, J-ADA-35-SSF-VR Drain system
100% ALL STAINLESS STEEL PACKAGE
CrA-ADA SErIES
CrA-ADA-14525-A-gr-T
NEw!
Bowl depths available 4-1/2” Through 6-1/2”, in 1/2” increments. Specify depth. Specify drain location on all ADA Compliant sinks: center / center left / center right / left rear / right rear or center rear location. Un less otherwise spec i fied drain lo ca tion is cen tered at rear of bowl.
INTEgrAL O
VErFL
Ow
SySTEM
1 09 1 09
DCr-rBT SErIESrEMOTE PUSh BUTTON BUBBLEr/FAUCET SINk PACkAgESNEw!
INCLUDES:
DCr-ADA-1737-A-gr-r SErIES
DCr-ADA-1542-A-gr-L SErIES
DCr-ADA-1739-A-gr-r SErIES
STyLIST grOUP ADA COMPLIANT DrINkINg FOUNTAIN/SINk COM BI NA TION 18 gAUgE
All dimensions shown in inches.
SPECIFICATIONS - ADA COMPLIANT - 18 gAUgE• JUST ADA Stylist Group A, seamless die-drawn construction of 18 gauge type 304, 18-8, stainless steel • In te ri or sur fac es polished to a non-porous Hand-Blended JUST finish, with high light ed bowl rim • Smooth fully coated underside insulates for sound and reduces con den sa tion • Straight-sided sink bowl with 1 3/4” radius corners provides greater capacity • Self-rimming top mount Grip-Rim Plus with 300 series stainless steel mounting channels • Con forms to ASME/ANSI A112.19.3M • Sink punched #35 centered at rear, for Just J-35 unless oth er wise specified • Receptor punched #15
1 O.D. - Overall Dimensions (Front-to-Back X Left-to-Right)2 I.D. - Inside Dimensions (Front-to-Back X Left-to-Right).3 Suffix “L” or “R” indicates location of receptor.
Bowl depths available 4-1/2” Through 6-1/2”, in 1/2” increments. Specify depth. Specify drain location on all ADA Compliant sinks: center / center left / center right / left rear / right rear or center rear location. Un less otherwise spec i fied drain lo ca tion is cen tered at rear of bowl.
ADA COMPLIANT - CLASSROOM SINK WITH RECEPTOR- MEETS NEW YORK PLUMBING RE QUIREMENTS Model No. O.D.1 BOWL TYPE I.D.2 DepthDCR-ADA-1542-A-GR-L3 or R3 15 x 42 BOWL 11-1/2 x 16 4-1/2 to 6-1/2 RECEPTOR 12” DIA. 2-1/2 DCR-ADA-1737-A-GR-L3 or R3 17 x 37 BOWL 11-1/2 x 16 4-1/2 to 6-1/2 RECEPTOR 12 x 9 3-1/2 DCR-ADA-1739-A-GR-L3 or R3 17 x 39 BOWL 11-1/2 x 16 4-1/2 to 6-1/2 RECEPTOR 12” DIA. 2-1/2 DCR-ADA-1943-A-GR-L3 or R3 19 x 43 BOWL 16 x 19 4-1/2 to 6-1/2 RECEPTOR 12 x 9 3-1/2
WITH INTEGRA-FLOW SYSTEMDCRF-ADA-1542-A-GR-L3 or R3 15 x 42 BOWL 11-1/2 x 16 4-1/2 to 6-1/2 RECEPTOR 12” DIA. 2-1/2 DCRF-ADA-1737-A-GR-L3 or R3 17 x 37 BOWL 11-1/2 x 16 4-1/2 to 6-1/2 RECEPTOR 12 x 9 3-1/2 DCRF-ADA-1739-A-GR-L3 or R3 17 x 39 BOWL 11-1/2 x 16 4-1/2 to 6-1/2 RECEPTOR 12” DIA. 2-1/2 DCRF-ADA-1943-A-GR-L3 or R3 19 x 43 BOWL 16 x 19 4-1/2 to 6-1/2 RECEPTOR 2 x 9 3-1/2
ADA COMPLIANT CLASSROOM SINKS - MEETS NEW YORK PLUMBING RE QUIREMENTS Model No. O.D.1 BOWL TYPE I.D.2 DCR-ADA-1542-A-GR-L3 or R3 -RBT 15 x 42 BOWL 11-1/2 x 16 4-1/2 to 6-1/2 RECEPTOR 12” DIA. 2-1/2 DCR-ADA-1737-A-GR-L3 or R3 -RBT 17 x 37 BOWL 11-1/2 x 16 4-1/2 to 6-1/2 RECEPTOR 12 x 9 3-1/2 DCR-ADA-1739-A-GR-L3 or R3-RBT 17 x 39 BOWL 11-1/2 x 16 4-1/2 to 6-1/2 RECEPTOR 12” DIA. 2-1/2 DCR-ADA-1943-A-GR-L3 or R3 -RBT 19 x 43 BOWL 16 x 19 4-1/2 to 6-1/2 RECEPTOR 12 x 9 3-1/2
Includes: JGN-745-VR Vandal Resistant ADA Compliant faucet, JSB-10 FLX-VR Flexible mouthguard vandal resistant bubbler, J-ADA-35 Drain, J-15-CB Drain
DCr-ADA-1737-A-gr-r-T
TyPE 316 Most JUST Stylist 18 gauge models are available in type 316 Stainless Steel, which offers greater corrosion resistance in harsh environments. See page 6.
ADA compliant classroom sink drinking fountain combinations meet New York State requirements.
DCr-ADA-1943-A-gr-r SErIES
INTEgrAL O
VErF
LOw
SySTEM
NEw!
ADA
Com
plia
nt
JrMSB-10-FLX-Vr Flexible mouthguard bubbler with remote push buttonJgN-745-Vr vandal resistant faucet (hot/Cold Mix)J-35-SSF-Vr drain systemJ15-CB drain
1 09 1 09All dimensions shown in inches.
Shown with: JGN-745-VR Vandal Resistant Faucet, JSB-10-FLX-VR Flexible Mouthguard Vandal Resistant Bubbler, J-ADA-35 Drain, J-15-FS Drain
rCr-ADA SErIES
SPECIFICATIONS - ACADEMIC grOUP A - 18 gAUgE• JUST Academic Group A, seamless die-drawn construction of 18 gauge type 304, 18-8, stainless steel • In te ri or sur fac es polished to a non-porous Hand-Blended JUST finish, with high light ed bowl rim • Fully coated underside insulates for sound and reduces con den sa tion • Straight-sided compartment with 1 3/4” radius corners provides greater capacity • Self-rimming top mount Grip-Rim Plus with 300 series stainless steel mounting channels • Con forms to ASME/ANSI A112.19.3M • Drain punch #35 centered at rear, for Just J-35 and #15 for J-15-FS, unless oth er wise specified
1 O.D. - Overall Dimensions (Front-to-Back X Left-to-Right)2 I.D. - Inside Dimensions (Front-to-Back X Left-to-Right)3 Suffix “L” or “R” indicates location of fountain unit.
rCr-ADA-1719-17-A-gr-r SErIES rCr-ADA-1925-15-A-gr-L SErIES
TyPE 316 Most JUST Stylist 18 gauge models are available in type 316 Stainless Steel, which offers greater corrosion resistance in harsh environ-ments. See page 6.
RCR-ADA-1719-17-A-GR-L3 or R3 17 x 19 BOWL 11-1/2 x 16 41/2-61/2 17 x 17 RECEPTOR 12” DIAMETER 2-1/2 RCR-ADA-1522-17-A-GR-L3 or R3 15 x 22 BOWL 11-1/2 x 16 41/2-61/2 15 x 17 RECEPTOR 12” DIAMETER 2-1/2
CLASSROOM SINK WITH ROUND RECEPTOR Model No. O.D.1 BOWL TYPE I.D.2 Depth
RCR-ADA-1719-15-A-GR-L3 or R3 17 x 19 BOWL 11-1/2 x 16 41/2-61/2 17 x 15 RECEPTOR 12 x 9 3-1/2 RCR-ADA-1925-15-A-GR-L3 or R3 19 x 25 BOWL 16 x 19 41/2-61/2 19 x 15 RECEPTOR 12 x 9 3-1/2
CLASSROOM SINK WITH RECTANGULAR RECEPTOR Model No. O.D.1 BOWL TYPE I.D.2 DepthrCr-ADA-1719-17-A-gr-r
Counter not included.
rCr-ADA-1719-15-A-gr-r Counter not included.
Bowl depths available 4-1/2” Through 6-1/2”, in 1/2” increments. Specify depth. Specify drain location on all ADA Compliant sinks: center / center left / center right / left rear / right rear or center rear location. Un less otherwise spec i fied drain lo ca tion is cen tered at rear of bowl.
OPTIONAL 2 hANDLEADA COMPLIANTVANDAL rESISTANTMIXINg FAUCETJgN-745-Vr
Deck mount single hole rigid spout gooseneck faucet with 4-15/16” reach, rigid spout and 2.2 GPM flow re strict ing aer a tor. Handles are indexed “H” & “C”. Deck to top of spout 11-15/32”. Deck to aerator 8-15/32”.
NEw!
NEw! PrODUCT grOUP
ADA COMPLIANT CLASSrOOM SINk/DrINkINg FOUNTAIN COMPONENT SINkS
ADA Compliant Classroom
Sinks
1 21 1 1 21 1
INTEgr-FLOw ADA COMPLIANT CLASSrOOM SINk/DrINkINg FOUNTAIN COMPONENT SINkS
RCF-ADA-1719-17-A-GR-L3 or R3 17 x 19 BOWL 11-1/2 x 16 41/2-61/2 17 x 17 RECEPTOR 12” DIAMETER 2-1/2 RCF-ADA-1522-17-A-GR-L3 or R3 15 x 22 BOWL 11-1/2 x 16 41/2-61/2 15 x 17 RECEPTOR 12” DIAMETER 2-1/2
CLASSROOM SINK WITH ROUND RECEPTOR Model No. O.D.1 BOWL TYPE I.D.2 Depth
RCF-ADA-1719-15-A-GR-L3 or R3 17 x 19 BOWL 11-1/2 x 16 41/2-61/2 17 x 15 RECEPTOR 12 x 9 3-1/2 RCF-ADA-1925-15-A-GR-L3 or R3 19 x 25 BOWL 16 x 19 41/2-61/2 19 x 15 RECEPTOR 12 x 9 3-1/2
CLASSROOM SINK WITH RECTANGULAR RECEPTOR Model No. O.D.1 BOWL TYPE I.D.2 Depth
All dimensions shown in inches.
Shown with: JGN-745-VR Vandal Resistant Faucet, JRMSB-10-VR Remote Push Button Vandal Resistant Bubbler System, J-ADA-35 Drain, J-15-FS Drain
rCF-ADA SErIES
SPECIFICATIONS - ACADEMIC grOUP A - 18 gAUgE• JUST Academic Group A, seamless die-drawn construction of 18 gauge type 304, 18-8, stainless steel • In te ri or sur fac es polished to a non-porous Hand-Blended JUST finish, with high light ed bowl rim • Fully coated underside insulates for sound and reduces con den sa tion • Straight-sided compartment with 1 3/4” radius corners provides greater capacity • Self-rimming top mount Grip-Rim Plus with 300 series stainless steel mounting channels • Con forms to ASME/ANSI A112.19.3M • Drain punch #35 centered at rear, for Just J-35 and #15 for J-15-FS, unless oth er wise specified
1 O.D. - Overall Dimensions (Front-to-Back X Left-to-Right)2 I.D. - Inside Dimensions (Front-to-Back X Left-to-Right)3 Suffix “L” or “R” indicates location of fountain unit.
rCF-ADA-1719-15-A-gr-L SErIES rCF-ADA-1522-17-A-gr-r SErIES
TyPE 316 Most JUST Stylist 18 gauge models are available in type 316 Stainless Steel, which offers greater corrosion resistance in harsh environ-ments. See page 6.
INTE
grAL
OVErFLOw SySTEM
remote push button option for JrMSB-10-Vr vandal resistant bubbler system
rCF-ADA-1719-15-A-gr-r Counter
not included.
rCF-ADA-1719-17-A-gr-LCounter not included. NEw!
Bowl depths available 4-1/2” Through 6-1/2”, in 1/2” increments. Specify depth. Specify drain location on all ADA Compliant sinks: center / center left / center right / left rear / right rear or center rear location. Un less otherwise spec i fied drain lo ca tion is cen tered at rear of bowl.
NEw! PrODUCT grOUP
ADA
Com
plia
nt C
lass
room
Sin
ks
1 21 1 1 21 1
ADA COMPLIANT rOUND & OVAL LAVATOrIES 18 gAUgE
CIR-ADA-10 12-1/4 10 5 CIR-ADA-12 14-1/4 12 6 CIR-ADA-14 16-1/4 14 5-1/4 CIR-ADA-16 18-1/4 16 5-1/2
SPECIFICATIONS - rOUND LAVATOry LESS OVErFLOw - 18 gAUgE• JUST Lavatory Group, seamless die-drawn construction of 18 gauge type 304, 18-8, stainless steel • In te ri or sur fac es polished to a non-porous Hand-Blended JUST finish • Fully coated underside insulates for sound and reduces con den sa tion • Drain punch #15 for J-15
SPECIFICATIONS - rOUND LAVATOry wITh OVErFLOw - 18 gAUgE• JUST Lavatory Group, seamless die-drawn construction of 18 gauge type 304, 18-8, stainless steel • In te ri or sur fac es polished to a non-porous Hand-Blended JUST finish • Fully coated underside insulates for sound and reduces con den sa tion • Drain punch for standard lavatory drain
Shown with: JV-1139-A-W4 Faucet with wrist blade handles, Recommended drain: J-15-FS Flat grid strainer
CLr-ADA-14
Recommended Option: J-15-FS Flat grid drainCIr-ADA-15
Shown with: JV-1139-A-W4 Faucet with wrist blade handles, J-115-FS Flat grid drain and connected overflow
CLF-ADA-14
Shown with: J-115-FS flat grid strainer and connected overflowCIF-ADA-10
CLr-SErIES
CIr-SErIES CIF-SErIES
Model No. O.D.DIA I.D DIA Depth
CLR-ADA-10 14-1/2 10 5 CLR-ADA-14 18-1/2 14 5-1/4
Model No. O.D.DIA I.D DIA Depth
CLF-SErIES
ADA COMPLIANT - 18 GAUGE CIRCULAR BOWL WITHOUT OVERFLOW
ADA COMPLIANT - 18 GAUGE CIRCULAR BOWL WITHOUT OVERFLOW - WITH FAUCET FLANGENEw!
CLF-ADA-10 14-1/2 10 5 CLF-ADA-14 18-1/2 14 5-1/4
Model No. O.D.DIA I.D DIA Depth
ADA COMPLIANT - 18 GAUGE CIRCULAR BOWL WITH OVERFLOW AND FAUCET FLANGENEw!
NEw! CIF-ADA-10 12-1/4 10 5 CIF-ADA-12 14-1/4 12 6 CIF-ADA-14 16-1/4 14 5-1/4 CIF-ADA-16 18-1/4 16 5-1/2
Model No. O.D.DIA I.D DIA Depth
ADA COMPLIANT - 18 GAUGE CIRCULAR BOWL WITH OVERFLOWNEw!
JV-1139-A-w J-ADA-952
Lavatory faucet with flat grid drain. Polished chrome. NSF.61 approved.
Lavatory faucet less drain. Polished chrome. With wrist blade handles. NSF.61 approved.
Polished chrome plated flat grid lavatory drain. In cludes one piece 1-1/4” O.D. 17 gauge offset tailpiece. If over flow is not used, drain requires SW-395 spacer and washer.
J-ADA-115-FS
ADA COMPLIANT LAVATOry FAUCETS AND DrAINS
Lavatory group
1 41 3 1 41 3
OVAL LAVATOrIES 18 gAUgE
All dimensions shown in inches.
SPECIFICATIONS - OVAL LAVATOry - 18 gAUgE• JUST Oval Lavatory Group, seamless die-drawn construction of 18 gauge type 304, 18-8, stainless steel • In te ri or sur fac es polished to a non-porous Hand-Blended JUST finish • Smooth fully coated underside insulates for sound and reduces con den sa tion• Self-rimming top mount
Shown with: JV-1139-A-W4 Faucet with wrist blade handles.Recommended drain: J-15-FS Drain
OLr-ADA-1619Recommended drain: J-115-FS Flat grid strainer and connected overflow (overflow shown).
OIF-ADA-1013
OIF-ADA SErIES OIr-ADA SErIESOLF-ADA SErIES OLr-ADA SErIES
OLF-ADA-1619 16 x 19 11-3/8 x 15-1/2 6 Model No. O.D. I.D. Depth
OVAL LAVATOry wITh LEDgE OVAL LAVATOry wIThOUT LEDgE
ADA COMPLIANT - OVAL LAVATORY WITH LEDGE WITH OVERFLOW - 18 GAUGE
OLR-ADA-1619 16 x 19 11-3/8 x 15-1/2 6
OVAL LAVATORY WITH LEDGE - LESS OVERFLOW
Model No. O.D. I.D. Depth
ADA COMPLIANT - OVAL LAVATORY WITH LEDGE LESS OVERFLOW - 18 GAUGE
NEw!
NEw!
OIF-ADA-1013 10-1/2 x 13-1/4 8-1/2 x 11-3/16 5-1/8
Model No. O.D. I.D. Depth
ADA COMPLIANT - OVAL LAVATORY WITHOUT LEDGE WITH OVERFLOW - 18 GAUGE
OIR-ADA-1013 10-1/2 x 13-1/4 8-1/2 x 11-3/16 5-1/8
OVAL LAVATORY WITH LEDGE - LESS OVERFLOW -
Model No. O.D. I.D. Depth
ADA COMPLIANT - OVAL LAVATORY WITHOUT LEDGE LESS OVERFLOW - 18 GAUGE
NEw!
NEw!
JSL-300-AC or B Sensor
ADA COMPLIANT LAVATOry FAUCETS
Lava
tory
gro
up
Deck mount, non-mixing, automatic faucet with chrome plated, solid brass 4” centerset construction, three hole punching required.
Includes faucet, sensor assembly with; Armored/vandal resistant control cable, wall mountable/vandal and water resistant control box, 0.5 GPM vandal resistant laminar flow control, 6V DC slow-closing solenoid valve.
AC POwErEDPlug-in power adapter with armored/vandal resistant output cable, 3/8” copper supply tube, in-line filter and mounting hardware.
BATTEry POwErEDBattery holder with (4) AA batteries, 3/8” copper supply tube, in-line filter and mounting hardware.
1 41 3 1 41 3
ADA COMPLIANT SINk INSErTS - 18 gAUgE
All dimensions shown in inches.
Includes: J-900 Faucet, JB1H-1 Instant Hot water dispenser, JB-99 Drain
SI-ADA-3467-A-gr-T
SPECIFICATIONS - ADA COMPLIANT - STyLIST grOUP A - 18 gAUgE• JUST Stylist Group A, seamless die-drawn construction of 18 gauge type 304, 18-8, stainless steel • In te ri or sur fac es polished to a non-porous Hand-Blended JUST finish • Smooth, fully coated underside insulates for sound and reduces con den sa tion • Straight-sided compartment with 1 3/4” radius corners provides greater capacity • Drainboards are flat, not sloped to bowl • Self-rimming top mount Grip-Rim Plus with 300 series stainless steel mounting channels • Con forms to ASME/ANSI A112.19.3M • Drain punch #35 for Just J-35 unless oth er wise specified • Standard understructural braces of 16 gauge mild steel
1 O.D. - Overall Dimensions (Front-to-Back X Left-to-Right)2 I.D. - Inside Dimensions (Front-to-Back X Left-to-Right)3 Suffix “L” or “R” indicates location of drainboard.
SI-ADA-L SErIESSINgLE BOwL-SINgLE DrAINBOArD
(rIghT-rEVErSED OF ShOwN)
SINgLE BOwL-DOUBLE DrAINBOArD
SIF-ADA-3049-A-gr-LDOUBLE BOwL-SINgLE DrAINBOArD
wITh INTEgrA-FLOw SySTEM(rIghT-rEVErSED OF ShOwN)
DOUBLE BOwL-DOUBLE DrAINBOArD
SI-ADA-1433-A-GR-L3 or R3 22 x 33 16 x 14 4-1/2 to 6-1/2 17-1/2 SI-ADA-1933-A-GR-L3 or R3 22 x 33 16 x 19 4-1/2 to 6-1/2 12-1/2 SI-ADA-1943-A-GR-L3 or R3 22 x 43 16 x 19 4-1/2 to 6-1/2 22-1/2 SI-ADA-2243-A-GR-L3 or R3 22 x 43 16 x 22 4-1/2 to 6-1/2 19-1/2
ADA COMPLIANT - SINGLE BOWL - SINGLE DRAINBOARD - 18 GAUGE Model No. O.D.1 I.D.2 Depth A
SIF-ADA-1433-A-GR-L3 or R3 22 x 33 16 x 14 4-1/2 to 6-1/2 17-1/2 SIF-ADA-1933-A-GR-L3 or R3 22 x 33 16 x 19 4-1/2 to 6-1/2 12-1/2 SIF-ADA-1943-A-GR-L3 or R3 22 x 43 16 x 19 4-1/2 to 6-1/2 22-1/2 SIF-ADA-2243-A-GR-L3 or R3 22 x 43 16 x 22 4-1/2 to 6-1/2 19-1/2
WITH INTEGRA-FLOW SYSTEM
INTEgrAL O
VErF
LOw
SySTEM
NEw!
SI-ADA-3049-A-GR-L3 or R3 22 x 49 16 x 14 4-1/2 to 6-1/2
ADA COMPLIANT - DOUBLE BOWL - SINGLE DRAINBOARD Model No. O.D.1 I.D.2 Depth
SIF-ADA-3049-A-GR-L3 or R3 22 x 49 16 x 14 4-1/2 to 6-1/2
WITH INTEGRA-FLOW SYSTEMNEw!
SI-ADA-3467-A-GR 22 x 67 16 x 16 4-1/2 to 6-1/2 16-1/2 SI-ADA-4067-A-GR 22 x 67 16 x 19 4-1/2 to 6-1/2 13-1/2 SI-ADA-3073-A-GR 22 x 73 16 x 14 4-1/2 to 6-1/2 21-15/16
ADA COMPLIANT - DOUBLE BOWL - DOUBLE DRAINBOARD - 18 GAUGE Model No. O.D.1 I.D.2 Depth A
SIF-ADA-3467-A-GR 22 x 67 16 x 16 4-1/2 to 6-1/2 16-1/2 SIF-ADA-4067-A-GR 22 x 67 16 x 19 4-1/2 to 6-1/2 13-1/2 SIF-ADA-3073-A-GR 22 x 73 16 x 14 4-1/2 to 6-1/2 21-15/16
WITH INTEGRA-FLOW SYSTEMNEw!
SI-ADA-2243-A-GR 22 x 43 16 x 22 4-1/2 to 6-1/2 10-1/2
SI-ADA-1961-A-GR 22 x 61 16 x 19 4-1/2 to 6-1/2 21
ADA COMPLIANT - SINGLE BOWL - DOUBLE DRAINBOARD Model No. O.D.1 I.D.2 Depth A
SIF-ADA-2243-A-GR 22 x 43 16 x 22 4-1/2 to 6-1/2 10-1/2
SIF-ADA-1961-A-GR 22 x 61 16 x 19 4-1/2 to 6-1/2 21
WITH INTEGRA-FLOW SYSTEMNEw!
Includes: JTR-51 Faucet, J-35 Drains
SI-ADA-1933-A-gr-L-T
NEw!PrODUCT
grOUP
ADA Compliant
INTEgrAL O
VErF
LOw
SySTEM
INTEgrAL O
VErF
LOw
SySTEM
INTEgrAL O
VErF
LOw
SySTEM
INTEgrAL O
VErF
LOw
SySTEM
1 61 5 1 61 5
CLASSrOOM wALL-hUNg SINk / DrINkINg FOUNTAIN
ADA COMPLIANTRugged and durable, this classroom sink unit fills the needs of to day’s class room in a stand-alone unit • Compliant with the Americans with Dis abil i ties Act, and CABO/ANSI A117.1-1992 Accessible and Usable Buildings and Fa cil i ties, this unit elim i nates the need for special cabinetry to deal with plumb ing re quire ments in the class room and compliance with ADA
SPECIFICATIONS - STAINLESS STEEL SINk TOP and ENCLOSUrETop and integral apron constructed of 16 gauge type 304 stain less steel • Bowl of 18 gauge stainless steel, seamless drawn construction • Vandal resistant enclosure of 18 gauge type 304 stain less steel • Unit shall have marine edge on three sides. En clo sure shall be se cured to apron using vandal resistant screws • Exposed exterior surfaces shall have a Hand-Blended Just Fin ish. Underside of bowl and top shall be sound deadened • ADA Compliant • Vandal Re sis tant
SIDE VIEW
SIDE VIEW
FRONT VIEW
FRONT VIEW
SPECIFICATIONS - STAINLESS STEEL SINk TOP with LAMINATE ENCLOSUrETop constructed of 16 gauge type 304 stainless steel • Bowl of 18 gauge stainless steel seamless drawn construction • Top shall have marine edge on three sides • Ex posed ex te ri or sur fac es shall have a Hand-Blended Just Finish • Underside of bowl and top shall be sound dead ened • Enclosure of flat black casework laminate construction • ADA Compliant
SPECIFICATIONS - LAMINATE TOP and ENCLOSUrE/STAINLESS STEEL BOwLTop and enclosure of flat black casework laminate construction • Bowl of 18 gauge stain less steel seamless drawn construction • Top flange and interior of bowl to have a Hand-Blend ed Just Finish • Underside of bowl shall be sound dead ened • ADA Com pli ant
TOP VIEW
TOP VIEW
SIDE VIEWFRONT VIEW
CPwh - 3025
Cwh-2524
CSwh-3025 Fittings included with this unit (as shown): See Below
Faucet shall be JUST J1176-R-M-VR with 5-1/2” reach, chrome plated gooseneck swivel spout, with vandal re sis tant aerator and handles • Bubbler shall be JUST JSB-10-VR type 304 Stainless Steel, Vandal resistant angle stream bub bler. The unit shall have a replaceable self-closing cartridge • Activation shall require less than 5lb. force, as required by ADA and CABO/ANSI A117.1-1992 spec i fi ca tions • Drain fittings shall be JUST J-ADA-35-SSF-VR stainless steel body, stainless steel flat grid strain er and 1-1/2” O.D. chrome plated waste arm 12” long
FITTINgS INCLUDED wITh ThESE UNITS (as shown): J-1176-r-M-Vr ADA Compliant, con cealed offset fau cet, JSB-10-Vr ADA Compliant, Vandal Re sis tant Bubbler, J-ADA-35-SSF-Vr Vandal resistant stainless steel flat grid strainer and body.
Fittings included with this unit (as shown): See Below
Fittings included with this unit (as shown): See Below
VANDAL RE SIS TANT
VR
TOP VIEW
ADA
Com
plia
nt
1 61 5 1 61 5
ADA COMPLIANT LAVATOrIES
SPECIFICATIONS - A-33338 LAVATOryADA Compliant seamless welded con struc tion, fab ri cat ed of 18 gauge type 304 stain less steel, with in te gral-formed backsplash and apron. Ex posed sur fac es pol ished with Hand-Blend ed Just Fin ish. Un der side coat ed to in su late for sound and re duce con den sa tion. Fur nished with wall clip and in te gral apron clip for wall mount ing. In cludes con nect ed overflow. Spec i fy punchings.
SPECIFICATIONS - LAVATOry TOPADA Compliant lavatory top • Fabricated of 14 gauge type 304 stainless steel with raised edge and in te gral 18 gauge stainless steel oval bowl (11 3/8” x 15 1/2” x 6” deep) • Underside fully coated with smooth sound deadening, which insulates for sound and reduces condensation • Ex posed sur fac es polished with a Hand-Blend ed Just Fin ish • Drain punch for standard pop-up lavatory drain opening with overflow (over flow supplied) • Supported on 12 gauge stainless steel wall brack ets. Includes 14 gauge wall clips. • Custom sizing available with same lead time • Specify sizing and requirements
SPECIFICATIONS - hCL-23520 hANDICAP LAV A TO ryADA Compliant wall hung, wheel chair accessible lavatory. Seamless weld ed con struc tion, fab ri cat ed of 18 gauge type 304 stain less steel, with in te gral-formed backsplash and apron. Ex posed sur fac es pol ished with Hand-Blend ed Just Fin ish. Un der side coat ed to in su late for sound and re duce con den sa tion. Fur nished with wall clip, in te gral apron clip and brackets for wall mount ing. In cludes con nect ed over flow. Spec i fy punchings.
Includes: JV-1139-A Faucet, J-ADA-115-FS Drain with overflow
A-33338-T
OVAL BOWL LAVATORY TOPS Model No. No. Bowls O.A. A B CJLAV-60-24 2 60 30 --- 15
JLAV-72-24 3 72 24 24 12
hCL-23520-T
Shown with: JV-1139-W Compliant Faucet, J-ADA-115-FS Drain system
JLAV-72-24
HCL-23520-TIncludes: J-1174-R ADA Compliant Faucet, J-ADA-115-FS ADA Compliant Drain with overflow
ADA Compliant
1 81 7 1 81 7
CLASSrOOM FAUCETS
VANDAL RE SIS TANT
VR
VANDAL RE SIS TANT
VR
VANDAL RE SIS TANT
VR
JTr-51-70-Vr JVr-1
Concealed faucet. 6 5/8” triple radius spout. Arc of swing spout re strict-ed to 70o. Polished chrome. Cast brass body. Vandal re sis tant chrome plat ed die cast teardrop han dles. Replaceable seats. 2.2 GPM vandal re sis tant flow re strict ing aerator. Deck to top of spout 12-1/2”. Deck to aer a tor 10”. Options: W4, W6, B, LRS, VR-A, VR-H, VRH/A.
Concealed faucet with 8-3/4” reach, high rise spout. Arc of swing spout re strict ed to 70o. Cast brass body with die cast vandal re sis tant tear drop han dles. Pol ished chrome plated fin-ish. Replaceable seats. 2.2 GPM van dal resistant flow re strict ing aer a tor. Deck to top of spout 11-5/8”. Deck to aer a tor 10-5/8”.
Deck mounted single supply with 4-11/16” reach, rigid goose neck spout and 2.2 GPM flow restricting aerator. Chrome plated cast brass body with lever handle. Deck to top of spout 12-11/16”. Deck to aerator 8 5/8”. Re place able seats. Specify hot “H” or cold “C”. Options: W4, W6, VR-A, VR-H, VRH/A.
Vandal resistant deck mounted single tap classroom faucet.Solid cast brass body with polished chrome finish. Replaceable seats. Vandal resistant chrome plat ed die cast lever handle. 10-15/16” high, 4” reach, rigid brass goose neck spout. 2.2 GPM vandal resistant flow restricting aerator. Options: LRS, VR-A, VR-H,VRH/A.
JwF-200-r70-Vr JgN-1A
Self closing lever controlled off set bub bler. Sol id cast brass body. Cast brass lever arm handle. Conforms to ANSI A112.18.1. ADA Com pli ant. 1/2”-14 NPT male shank. Polished chrome finish. NSF.61 approved.
JBB-5
CLASSrOOM BUBBLEr
CLASSrOOM ACCESSOry
CLASSrOOM SINk DrAINS& rECEPTOr
JSB-10-Vr
JhDD-2000
J-15-CB-Vr (For receptor)
Self closing push button vandal resistant bub bler. Totally Lead Free con-struc tion of type 304 stainless steel. Re place able stain less steel car tridge. Ad just able flow reg u la tor. 1/2-14 NPS shank. High ly buffed finish. Vandal resistant pin helps pre vent turn ing of fix ture. NSF.61 approved. Available with forgiving plastic anti-microbial mouthguard as JSB-10-FLX-VR (see page 7)
Commercial grade stainless steel liquid soap dispenser. 34 fl. oz. ca pac i ty. Plung er and escutheon are van dal resistant. Reservoir and shank high impact resistant ABS. NSF.61 approved.
VANDAL RE SIS TANT
VR
VANDAL RE SIS TANT
VR
VANDAL RE SIS TANT
VR
#15 Chrome plated brass vandal re sis tant drain.
VANDAL rESISTANT
100% ALL STAINLESS STEEL
J-ADA-35-SSF-VrStainless steel #35 flat grid vandal resistant drain. In cludes 1-1/2” O.D. stainless steel tailpiece 4” long.
VANDAL RE SIS TANT
VR
100% ALL STAINLESS STEEL
ADA
Com
plia
nt F
auce
ts a
nd B
ubbl
ers
CLASSrOOM SINk BUBBLEr
1 81 7 1 81 7
Chrome plated brass drain with flat strainer and 1-1/2” O.D. 17 gauge chrome plated brass off set tailpiece system.
J-ADA-35-FS
J-1174-r rigid Spout
ADA Compliant, flame-retardant insulator, meets the 105oF her mal conduc-tivity level and chemical resistance re quire ments of ADA. Easy pull tie instal-lation. Kit fully covers drain. Use with 1-1/2” O.D. drain systems (#35 type).
J-ADA-150
Concealed mixing faucet. 6-1/2” rigid gooseneck spout. Polished chrome finish.NSF.61 approved.
J-900
Deck mounted washerless mixing faucet with escutcheon. 8” reach, brass swing spout. J-901 identical to J-900 except includes spray with hose.
JgN-745-Vr
Deck mount single hole gooseneck faucet with 4-15/16” reach, rigid spout and 2.2 GPM flow re strict ing aer a tor. Handles are indexed “H” & “C”. Deck to top of spout 11-15/32”. Deck to aerator 8-15/32”.
Stainless Steel #35 flat grid ADA compliant Vandal Resistant drain system. Includes set screen and 1-1/2” O.D. Stainless Steel tailpiece 4” long.
J-ADA-35-SSF-Vr
ADA COMPLIANT FAUCETS
ADA COMPLIANT DrAIN SySTEMS
ADA COMPLIANT INSULATOr kITS
ADA Compliant, flame-retardant insulator, meets the 105oF ther mal conductivity level and chemical resistance re quire ments of ADA. Easy snap together installation. Kit fully covers drain. Use with 1-1/4” O.D. drain systems (J-ADA-115-FS).
J-ADA-125
Polished chrome plated flat grid lavatory drain. In cludes one piece 1-1/4” O.D. 17 gauge offset tailpiece. If over flow is not used, drain requires SW-395 spacer and washer.
J-ADA-115-FS
OPTIONAL 2 hANDLEADA COMPLIANTVANDAL rESISTANTMIXINg FAUCET
NEw!
J-990-wF Swivel Spout
Hi arc swivel gooseneck commercial grade remote single handle faucet. Stainless steel ball operation with 7-3/8” reach and 11” high spout. Stainless steel flex connector lines. Matching chrome plated spray. Finish: Chrome.Extended Stainless Steel flex lines with factory provided mounting tool for faster easier instal-lation.
J-990-LS Swivel Spout J-990-LS-r rigid Spout
Hi arc swivel gooseneck commercial grade remote single handle faucet. Stainless steel ball operation with 7-3/8” reach and 11” high spout. Stainless steel flex connector lines. Less spray. Finish: Chrome.Extended Stainless Steel flex lines with factory provided mounting tool for faster easier installation.
Hi arc RIGID gooseneck commercial grade remote single handle faucet. Stainless steel ball operation with 7-3/8” reach and 11” high spout. Stainless steel flex connector lines. Less spray. Finish: Chrome. Vandal Resistant.Extended Stainless Steel flex lines with factory provided mounting tool for faster easier installation.
VANDAL RE SIS TANT
VR
ADA Compliant Faucets Drains and
Insulators