Capability Overview Large scale facility includes four manufacturing bays with a total of 135,000 sq. ft. A portion of the facility is temperature controlled between 68-77°F and humidity-controlled from 40-50%. Molding and Processing Equipment One – 150 ton hydraulic press Two – 165 ton hydraulic presses One – MultiCam 7000 Series 3-Axis CNC machine One – DMS Model 5B5-6-12-XX/S 5-axis moving gantry CNC router One – WardJet Motoman Robot MH50, DX 200 controller, 7-axis system Two – 10 ton bridge cranes One – 5 ton bridge crane Curing Oven/Paint Booth - 131’ x 12’ x 14’ (L x W x H) up to 260˚F to improve cure cycles Curing Oven - 45’ x 12’ x 12’ (L x W x H) up to 300˚ F Value Added Services • Project Management • Part Reduction & Consolidation • Design and Engineering Consultation • 3-D Modeling and CAD/CAM • Jig and Fixture Design & Fabrication • Production Mold Fabrication • Prototype Development • On-site First Article Validation • Surface Finishes - Painted or Gel-coated • Secondary Hardware Integration • Assembly Services MFG Texas Low Pressure Molding Center of Excellence