March 2014
•• DispensaryDispensary•• Consultation RoomConsultation Room•• Nurses RoomNurses Room
This guide is designed as an aid to recognising component parts andinstalling within Superdrug Pharmacy and associated areas
It is important that this guide is used only in accordance withSuperdrug’s site specific layout drawing
Recognition Manual & Installation Guide 2014
Contents
Part no. Description Page Part no. Description Page
Main furniture Sundry Lines
Part no. Description PageCN377DDP Drop Down Desk c/w PC Housing 7CN500DCU Drawer & Cupboard Unit 8CN500LSC Lockable Storage Cupboard 9CN500PFU Printer Shelf (Pull out) & Filing Unit 10CN500WLH Wall Mounted Cupboard L/H 11CN500WOS Wall Mounted Open Shelves 12CN500WRH Wall Mounted Cupboard R/H 11CN926WD Consultation Room Door 13CN2000SB Brushed Laminate Splash Back 14CN2000PCB Plinth Cover to Cons Room Base Units 15
Part no. Description PageCN00A Chair with Arms – Green 36CN00HM Height Measure – Wall mounted 36CN00MT Mixer Tap 15CN00S Sink 15CN00SF Sharps Flap 15CN00WA Chair without Arms – Green 36CN00WGD Wall Mounted Glove Dispenser 14CN00WS Weighing Scales 36DCN0B Waste Bin 9DCN0WHS Wall Mounted Hand Sanitiser 16CN2000PCB Plinth Cover to Cons Room Base Units 15
D00SBW Splash Back Wall Unit 16D400BN Bin Cupboard inc PVC bin 17D470CDC Controlled Drugs Cabinet 18D500BH Bottle Hopper 19D500BSU Bottle Rack & Sink Unit 20D500DP Doop Unit Small 21D500OP Open Shelf Unit 22D500RX Prescription Storage 23D550UBC Under Worktop Boxed Corner 24D550UEP Under Worktop End Panel 24
DCN0WHS Wall Mounted Hand Sanitiser 16DCN0WPT Wall Mounted Paper Towel Dispenser 16D00CM Conical Measure Holder 16D1000ASS Adjustable Spur MFC Shelves 37D00BE Bookends 37D150EM Ergo Mat 37D900NB Notice Board 37D00BIS Brief Intervention Screen 26N00EC Examination Couch 39N00CR Couch Rolls 39N00CC Curtain Cubicle 39D550UEP Under Worktop End Panel 24
D600IT IT Unit 25D600TEP Tall End Panel 26D650TBC Tall Boxed Corner 27D760AZE A-Z Medicine Storage Extension Module 29, 30D760AZS A-Z Medicine Storage Starter Module 29, 30D760FSE Finished Scripts Extension Module 31, 32D760FSS Finished Scripts Starter Module 31, 32D760UEC Universal End Drawer Cover 32D1000DP Doop Unit Large 33D1000GW Grey Worktop (Pill Accuracy Check) 35
N00CC Curtain Cubicle 39N00CCR Curtain Rail 39
D1000GW Grey Worktop (Pill Accuracy Check) 35D1000OP Open shelf unit 34D3000WW White Worktop 15, 35
Recognition Manual & Installation Guide 2014
On receipt of the equipment thedriver will present a copy of thedelivery note which will recordall component parts deliveredin consignment.
It will also show, under“pending” any equipment to“pending” any equipment tofollow.
Delivery Note
Page 1
PALLET CONTENTS SHEET
Job Number and Store Name
456-055867
Looking forSpecific Items
Delivery To SUPERDRUG at :
37 High Street
Town
County
Post Code
Job Ref. Client Delivery Date
Each pallet delivered will have apallet contents sheet stuck topolythene packaging.
This sheet lists only what isincluded on the pallet andenables specific parts to befound more quickly. Job Ref. Client Delivery Date
10699 01/02/03
PALLET SIZE _______ PALLET 3_______OF_____12___
QTY SUPERDRUG Part No. Cardinal Part No. DESCRIPTION
1 D500BH C6930-00 Bottle Hopper
found more quickly.
Some pallets may have severalparts packed upon it especiallyif they are small.
Retain all pallet sheets forfuture reference untilconsignment has beenunpacked and checked off. 1 D500BH C6930-00 Bottle Hopperunpacked and checked off.
PICKED/PACKED BY ___________________________ DATE ___________________
CHECKED BY _________________________________ DATE ___________________
Pallet Contents Sheet
Page 2
Typical Dispensary OverviewPlease refer to Superdrug site specific layout drawing for exact configuration of units
Recognition Manual & Installation Guide 2014 Page 3
Recognition Manual & Installation Guide 2014
Typical Dispensary OverviewPlease refer to Superdrug site specific layout drawing for exact configuration of units
Page 4
Recognition Manual & Installation Guide 2014
Typical Consultation Room OverviewPlease refer to Superdrug site specific layout drawing for exact configuration of units
Page 5
Typical Nurses Room OverviewPlease refer to Superdrug site specific layout drawing for exact configuration of units
Page 6Recognition Manual & Installation Guide 2014
Critical Dimensions600mm x 377mm x 750mm600mm x 377mm x 750mm
Installation Detail
•Ensure open end faces wallunits and closed end facespatient•Use appropriate fixings to fixto wall
Part no CN377DDP Drop Down Desk
Recognition Manual & Installation Guide 2014 Page 7
Critical Dimensions500x500x912mm500x500x912mm
Installation Detail
•Level using adjustable feet.•Use appropriate fixings to fixthrough to wall & neighbouringunits
If bin is used in thiscupboard pleaseremove lid
Part no CN500DCU Drawer & Cupboard Unit
Recognition Manual & Installation Guide 2014 Page 8
Critical Dimensions500x500x912mm
Installation Detail
•Level using adjustable feet.•Use appropriate fixings to fixthrough to wall & neighbouringunits.•If Needle Exchange chute isrequired cut worktop usingchute as a template.•For Sharps Flap specificationplease see page 34
Installation Detail
•Waste Bin to stand inside one of thelockable storage cupboards
CN500LSC Lockable Storage CupboardDCN0B Waste Bin
please see page 34
Recognition Manual & Installation Guide 2014 Page 9
Back of unit is open to allow accessto power and data sockets
Critical Dimensions500x500x912mm500x500x912mm
Installation Detail
•Level using adjustable feet.•Use appropriate fixings to fixthrough to wall & neighbouringunits
Part no CN500PFU mm Printer & File Unit
Recognition Manual & Installation Guide 2014 Page 10
Critical Dimensions600x500x350mm600x500x350mm
Installation Detail
•All wall units should be fixed 550mm abovefinished worktop to allow for splashback•Use appropriate fixings to fix to wall•Use white screw caps to cover any visible screws
Part no CN500WLH Wall Cupboard R/HPart no CN500RLH Wall Cupboard L/H
Recognition Manual & Installation Guide 2014 Page 11
Critical Dimensions600x500x350mm600x500x350mm
Installation Detail
•All wall units should be fixed 550mm abovefinished worktop to allow for splashback•Use appropriate fixings to fix to wall•Use white screw caps to cover any visible screws
Part no CN500WOS Wall Mounted Open Shelves
Recognition Manual & Installation Guide 2014 Page 12
Cross logo suppliedby signage contractor
Critical DimensionsCritical Dimensions2040 x 926 x 45mm
Installation Detail
•Sent to site without blind orhinges attached (but supplied)to enable door to be handed onsitesite
•Door is supplied withundercoat. Top coat must beadded on site
•Fix blind to rear of door usingappropriate fixings
•Fix door hook to rear of door
Part no CN926WD Consultation Room Door
•Fix door hook to rear of doorcentralised at 1600mm high
Recognition Manual & Installation Guide 2014 Page 13
CT34069 Paper Towel DispenserNB Key to open dispenser isincluded and should behanded to Pharmacy manager
DCN0WHS Wall MountedHand Sanitiser
265mm x 156mm x 96mm
Critical Dimensions2000x550x18mm
Splash Back
Pre Laid Brushed AluminiumMDF
265mm x 156mm x 96mm
Installation Detail
•Use appropriate fixings orgripfill to fix splash back.•Add ancillary items to positionsindicated on elevation•Please ensure that there isenough clearance above towel
CN00WGD Wall Mounted GloveDispenser 100mm x 270mm x95mm
Part no CN2000SB Splash Back
enough clearance above toweldispenser to allow with openingkey
Recognition Manual & Installation Guide 2014
95mm
Page 14
Installation Detail
•Cut worktop to length•Edge any exposed ends•Fit to top of base units using appropriate fixings•Fit to top of base units using appropriate fixings•Cut hole for sink and mixer tap as indicated on layoutdrawing•Cut hole for Sharps flap if required•Fix plinth to base units using gripfill or appropriatefixings
Part no D3000WW WorktopPart no CN00S Sink
CN2000PCBBrushed Aluminium Laminate
CN00SF Sharps Flap fittingdetail
Recognition Manual & Installation Guide 2014
Part no CN00S SinkPart no CN00MT Mixer TapPart no CN00SF Sharps FlapPart no CN2000PCB Plinth to Base Unit
Brushed Aluminium Laminatefaced mdf plinth 2000mm x100mm x 18mm
Page 15
DCN0WPT Wall Mounted Paper Towel Dispenser
NoteKey to open towel dispenser isincluded and should be handed toPharmacy manager
D00SBW – Splash Bach Wall unit
Critical Dimensions600mm high x 990m wide x 12mm thick
Installation Detail
•Use appropriate fixings or gripfill to fix splash back
DCN0WHS Wall MountedHand Sanitiser
D00CM Conical Measure Holder200mm high x 370mm wide x
•Use appropriate fixings or gripfill to fix splash backabove bottle rack & sink unit•Seal joint with white silicon•Add ancillary items to positions indicated onelevation
Ancillary items
• DCN0WHS Wall Mounted Hand Sanitiser• DCN0WPT Wall Mounted Paper Towel Dispenser
Part no D00SBW – Splash Back Wall Unit
Recognition Manual & Installation Guide 2014
Hand Sanitiser265mm x 156mm x 96mm
200mm high x 370mm wide x150mm depth
• DCN0WPT Wall Mounted Paper Towel Dispenser• D00CM Conical Measure Holder
Page 16
Critical Dimensions400x520x200mm
Installation Detail
•Ensure unit is level usingadjustable feet•Use appropriate fixings to fixthrough to neighbouring unit.
and to underside of worktop•A void to rear of unit and wall Capacity: 39 Litres
Part no. D400BN Bin Cupboard including pvc bin
Recognition Manual & Installation Guide 2014
•A void to rear of unit and wallallows for plumbing etc.
Page 17
Capacity: 39 LitresDimensions: 500mm x 380mmx 280cm
N.B. Cabinets are only to be fixed to concrete floor or structural wall with rag bolts
Critical Dimensions470x480x695mm
Installation DetailInstallation Detail
•Position on floor as indicatedon layout drawing•Fix only to concrete floor orstructural wall with rag bolts
Part no CDC906 – Controlled Drugs Cabinet
Recognition Manual & Installation Guide 2014 Page 18
Critical Dimensions
500x520x920mm
Installation Detail
•Ensure unit is level usingadjustable feet•Use appropriate fixings to fixthrough to neighbouring unit.
and to underside of worktop•A void to rear of unit and wall
Part no D500BH Bottle Hopper
•A void to rear of unit and wallallows for plumbing etc. Note
Bottles not supplied
Recognition Manual & Installation Guide 2014 Page 19
Critical Dimensions500x520x920mm
NoteBottle rack is removable toallow access to waste & waterheater .
Installation Detail
•Cut hole in back to allowaccess to plumbing•Ensure unit is level usingadjustable feet•Use appropriate fixings to fixthrough to neighbouring unit.
and to underside of worktop
Part no D500BSU - Bottle Rack & Sink Unit
heater .
Recognition Manual & Installation Guide 2014
and to underside of worktop•A void to rear of unit and wallallows for plumbing etc.
Page 20
Critical Dimensions500x520x920mm
Note1no adjustable shelf to
Installation Detail
•Ensure unit is level usingadjustable feet•Use appropriate fixings to fixthrough to neighbouring unit.
and to underside of worktop•A void to rear of unit and wall
Part no D500DP - Doop Unit Small
1no adjustable shelf toeach unit.
Recognition Manual & Installation Guide 2014
•A void to rear of unit and wallallows for plumbing etc.
Page 21
Critical Dimensions500x520x920mm
NoteIncludes 3no adjustable
Installation Detail
•Ensure unit is level usingadjustable feet•Use appropriate fixings to fixthrough to neighbouring unit.
and to underside of worktop•A void to rear of unit and wall
Part no. D500OP - Open Shelf Unit
Recognition Manual & Installation Guide 2014
Includes 3no adjustableshelves
•A void to rear of unit and wallallows for plumbing etc.
Page 22
Critical Dimensions
500x520x920mm
NoteSuited locks to fullrange, each drawer hasbinning strip withacrylic dividers.
Installation Detail
•Ensure unit is level usingadjustable feet•Use appropriate fixings to fixthrough to neighbouring unit.
and to underside of worktop•A void to rear of unit and wall
Part no. D500RX - Prescription Storage
acrylic dividers.
Recognition Manual & Installation Guide 2014
•A void to rear of unit and wallallows for plumbing etc.
Page 23
Critical Dimensions920x550x18mm
Under Worktop End Panels
Installation Detail•Use top & bottom Uchannel or appropriatefixings to fix to end unit.
Critical Dimensions920x550x550mm
Installation Detail
Under Worktop Boxed Corner
•Use appropriate fixings to fix U channel to underside ofworktop and floor.•Position first top & bottom U channels 530mm fromwall.•Position second set 550mm from adjacent wall•Panels are supplied oversized so that they can bescribed to fit•Slide panels into position and cover front corner withwhite PVC angle trim
Part no. D550UBC - Under Worktop Boxed CornerPart no. D550UEP - Under Worktop End panels
white PVC angle trim
Recognition Manual & Installation Guide 2014 Page 24
Critical Dimensions600x520x920mm600x520x920mm
NoteCut out to rear to enablecabling.
Installation Detail
•Ensure unit is level usingadjustable feet•Use appropriate fixings to fixthrough to neighbouring unit.
and to underside of worktop•A void to rear of unit and wall
Part no. D600IT - IT Unit
cabling.
Recognition Manual & Installation Guide 2014
•A void to rear of unit and wallallows for plumbing etc.
Page 25
D18TEP Tall End Panel
Critical Dimensions D00BIS Brief Intervention ScreenCritical Dimensions3000x600x30mm
Installation Detail
•Panel has pre-drilled holes for fixing to perimeter post•Use appropriate fixings to fix end panel to perimeterpost•Use white screw caps to cover any visible screws•Seal joint to wall with white silicon
Installation Detail
•Fit screen between counter units asindicated on layout drawings•Use appropriate fixings to fix panel toFront shaped to match
D00BIS Brief Intervention Screen
Critical Dimensions1500x710x10mm
Part no. D600TEP – Tall End PanelPart no. D00BIS – Brief Intervention Screen
Page 26Recognition Manual & Installation Guide 2014
•Seal joint to wall with white silicon •Use appropriate fixings to fix panel toadjacent units
Front shaped to matchcounter profile
Critical Dimensions2400x650x650mm
Installation Detail
•Create boxed corner from 50mm x 50mm softwood andwhite MFC panels supplied•Use appropriate fixings to fit softwood to walls•Use appropriate fixings to fix panels into position andcover front corner with white PVC angle trim•Use white screw caps to cover any visible screws
Part no. D650TBC – Tall Boxed Corner
•Use white screw caps to cover any visible screws•If ceiling height exceeds 2400mm cut wall batons fromsoftwood provided and fix to wall to take lid
Recognition Manual & Installation Guide 2014 Page 27
Part no. D760AZS - A-Z Medicine Starter Module
Part no. D760AZE - A-Z Medicine Extension Module
CautionIt is vital that system posts are installed in astraight line ,vertical and level and fixed at 2nopoints on each individual post utilising suppliedadjustable wall fixing brackets
Recognition Manual & Installation Guide 2014 Page 29
1. Erect frame of perimeterlegs and tie bars usingM10x50mm bolts, washersand nuts. Use 3no tie barsper module.per module.
The tie bars are handed ,ensure bar faces front onbrackets
Do not over tighten.
2. Use adjustable feet to level
3. Use two wall fixingbrackets per upright, at alltimes using appropriatefixings to ensure posts areflush with each other2. Use adjustable feet to level
frame
flush with each other
Critical Dimensions 2100mm x 760mm x 610mm
7. Fit pull out shelves into postsstarting at bottom. The bottom shelfto occupy notches 11 & 13. Leave2no empty notches between eachsubsequent shelf
6. Slide into position baseplinth drawers
4. When all of the posts are inposition screw on the baseplinth covers.
5. Hang back panelson to tie bars
Critical Dimensions 2100mm x 760mm x 610mm
Recognition Manual & Installation Guide 2014
Part no. D760AZS - A-Z Medicine Starter Module
Part no. D760AZE - A-Z Medicine Extension Module
Page 30
Part no. D760FSS Finished Scripts Starter Module
Part no. D760FSE Finished Scripts Extension Module
CautionIt is vital that system posts are installed in astraight line ,vertical and level and fixed at 2nopoints on each individual post utilising suppliedadjustable wall fixing brackets
Recognition Manual & Installation Guide 2014 Page 31
1. Build frame as in A-Zmodules but use “L” shapedposts rather than “h” shapedposts
2. Start at bottom and fitdeep drawers into lowestpossible notches
3. Fit lower pull out shelfinto notch 41 and thenleave 3no. notchesbetween each shelf above
4. Fit opal acrylic fronts to5no. Pull out shelves
D760UEC Universal End Drawer Cover1. Use Universal End Drawer cover on proceeding A-Zmodule if Finished Scripts module is part of same run
5no. Pull out shelvesmodule if Finished Scripts module is part of same run
Part no. D760FSS Finished Scripts Starter Module
Enablestransition fromA-Z “h” leg toFinished scripts“L2 leg
Recognition Manual & Installation Guide 2014
Part no. D760FSS Finished Scripts Starter Module
Part no. D760FSE Finished Scripts Extension Module
Page 32
Part no. D760UEC Universal End Drawer Cover
Critical Dimensions1000x520x920mm
Installation Detail
•Ensure unit is level usingadjustable feet•Use appropriate fixings to fixthrough to neighbouring unit.
and to underside of worktop•A void to rear of unit and wall
Part no D1000DP - Doop Unit Large
Note1no adjustable shelf.
Recognition Manual & Installation Guide 2014
•A void to rear of unit and wallallows for plumbing etc.
Page 33
Critical Dimensions1000x520x920mm
NoteIncludes 3no adjustable
Installation Detail
•Ensure unit is level usingadjustable feet•Use appropriate fixings to fixthrough to neighbouring unit.
and to underside of worktop•A void to rear of unit and wall
Recognition Manual & Installation Guide 2014
Includes 3no adjustableshelves
•A void to rear of unit and wallallows for plumbing etc.
Part no. D1000OP - Open Shelf Unit
Page 34
Accuracy Checking Area Worktop
The accuracy area is indicated on the layout
Critical Dimensions1000x600x30mm
The accuracy area is indicated on the layoutdrawing by the dotted area
Critical Dimensions3000x600x30mm
White work tops
Installation Detail
•Cut to appropriate length as required on site•Exposed ends should always overrun 25mm•Edge all exposed ends•Create a masons mitre for all corner joints•Use 3no work top connectors to all joints•Use appropriate fixings to fix top to units
3000x600x30mm
Installation Detail•Where indicated on layout drawing fit grey wok top•Exposed ends should always overrun 25mm•Edge all exposed ends•Create a masons mitre for any corner joints•Use 3no work top connectors to all joints•Use appropriate fixings to fix top to units underneath•Seal joint to wall with white silicon
Part no. D3000WW - White WorktopPart no. D1000GW - Grey Worktop
•Use appropriate fixings to fix top to unitsunderneath•Seal joint to wall with white silicon
•Seal joint to wall with white silicon
Recognition Manual & Installation Guide 2014 Page 35
Consultation Ancillary ItemsPart no CN00WA Chair without ArmsPart no CN00A Chair with Arms
Installation Detail
•Position all ancillary items asper layout drawing
Part no CN00A Chair with ArmsPart no CN00HM Height measurerPart no CN00WS Weighing scales
per layout drawing•Use appropriate fixings to fixheight measurer to wall
Recognition Manual & Installation Guide 2014 Page 36
Adjustable Spur MFC Shelves
Critical Dimensions250x990x18mm per shelfSent to site as a set of 5no shelves,2no 710mm spur uprights & 5nopairs of 200mm brackets
Installation Detail
D900NBNotice board to be fixed to wallwhere indicated on layoutdrawing
•Set Spur 150mm above the worktopto allow space for low level (90mm)electrical trunking. Set low leveltrunking flush with worktop to allowa 60mm gap between top oftrunking and the underside of thebottom spur shelf.•Make allowances for IT Monitorswhen setting out on site.
drawing
Part no D1000ASS - Adjustable Spur MFC Shelves
when setting out on site.•Use appropriate wall fixings.
D00BE•If Bookends are specified leaveloose on spur shelves for use bypharmacy team
D150EMErgo mat to be loose laid asindicated on layout drawingPart no D1000ASS - Adjustable Spur MFC Shelves
Part no D00BE - BookendsPart no D900NB - Notice BoardPart no D150EM - Ergo Mat
Recognition Manual & Installation Guide 2014
indicated on layout drawing
Page 37
Recognition Manual & Installation Guide 2014 Page 38
The Nurses Room is similar to the Consultation Room but is largerand includes a treatment couch, curtain and curtain rail
Critical Dimensions780mm high x1930mm long x600mm deep
Part no N00EC Examination CouchPart no N00CR Couch RollsPart no N00CC Cubicle CurtainPart no N00CR Curtain Rail
Installation Detail
600mm deep
Nurses Room Overview
Part no N00CR Curtain Rail
Recognition Manual & Installation Guide 2014
•Fix Curtain rail to ceiling asindicated on layout drawing
Page 39
Pedestal desk
Critical DimensionsCritical Dimensions730mm high x 1200 length x800mm deep
Examination lamp
Installation Detail
•Use appropriate fixings to fit rail toThree quarter mirror
Office chair
•Use appropriate fixings to fit rail towalls at 1100mm high•Slot lamp on to rail•Electrical contractor to wire to spurwith flexi cable
Three quarter mirror1500mm high x 500 wide
Installation Detail
•Use appropriate fixings to fit mirrorto wall 400mm from the floor•Use mirro screw caps to coverfixings
Nurses Room Overview
Recognition Manual & Installation Guide 2014 Page 40
Critical Dimensions1130mm high x 470 width x 470mm deep