Installation Manual 2014 (March)

March 2014

•• DispensaryDispensary•• Consultation RoomConsultation Room•• Nurses RoomNurses Room

This guide is designed as an aid to recognising component parts andinstalling within Superdrug Pharmacy and associated areas

It is important that this guide is used only in accordance withSuperdrug’s site specific layout drawing

Recognition Manual & Installation Guide 2014

Contents

Part no. Description Page Part no. Description Page

Main furniture Sundry Lines

Part no. Description PageCN377DDP Drop Down Desk c/w PC Housing 7CN500DCU Drawer & Cupboard Unit 8CN500LSC Lockable Storage Cupboard 9CN500PFU Printer Shelf (Pull out) & Filing Unit 10CN500WLH Wall Mounted Cupboard L/H 11CN500WOS Wall Mounted Open Shelves 12CN500WRH Wall Mounted Cupboard R/H 11CN926WD Consultation Room Door 13CN2000SB Brushed Laminate Splash Back 14CN2000PCB Plinth Cover to Cons Room Base Units 15

Part no. Description PageCN00A Chair with Arms – Green 36CN00HM Height Measure – Wall mounted 36CN00MT Mixer Tap 15CN00S Sink 15CN00SF Sharps Flap 15CN00WA Chair without Arms – Green 36CN00WGD Wall Mounted Glove Dispenser 14CN00WS Weighing Scales 36DCN0B Waste Bin 9DCN0WHS Wall Mounted Hand Sanitiser 16CN2000PCB Plinth Cover to Cons Room Base Units 15

D00SBW Splash Back Wall Unit 16D400BN Bin Cupboard inc PVC bin 17D470CDC Controlled Drugs Cabinet 18D500BH Bottle Hopper 19D500BSU Bottle Rack & Sink Unit 20D500DP Doop Unit Small 21D500OP Open Shelf Unit 22D500RX Prescription Storage 23D550UBC Under Worktop Boxed Corner 24D550UEP Under Worktop End Panel 24

DCN0WHS Wall Mounted Hand Sanitiser 16DCN0WPT Wall Mounted Paper Towel Dispenser 16D00CM Conical Measure Holder 16D1000ASS Adjustable Spur MFC Shelves 37D00BE Bookends 37D150EM Ergo Mat 37D900NB Notice Board 37D00BIS Brief Intervention Screen 26N00EC Examination Couch 39N00CR Couch Rolls 39N00CC Curtain Cubicle 39D550UEP Under Worktop End Panel 24

D600IT IT Unit 25D600TEP Tall End Panel 26D650TBC Tall Boxed Corner 27D760AZE A-Z Medicine Storage Extension Module 29, 30D760AZS A-Z Medicine Storage Starter Module 29, 30D760FSE Finished Scripts Extension Module 31, 32D760FSS Finished Scripts Starter Module 31, 32D760UEC Universal End Drawer Cover 32D1000DP Doop Unit Large 33D1000GW Grey Worktop (Pill Accuracy Check) 35

N00CC Curtain Cubicle 39N00CCR Curtain Rail 39

D1000GW Grey Worktop (Pill Accuracy Check) 35D1000OP Open shelf unit 34D3000WW White Worktop 15, 35


On receipt of the equipment thedriver will present a copy of thedelivery note which will recordall component parts deliveredin consignment.

It will also show, under“pending” any equipment to“pending” any equipment tofollow.

Delivery Note

Page 1

PALLET CONTENTS SHEET

Job Number and Store Name

456-055867

Looking forSpecific Items

Delivery To SUPERDRUG at :

37 High Street

Town

County

Post Code

Job Ref. Client Delivery Date

Each pallet delivered will have apallet contents sheet stuck topolythene packaging.

This sheet lists only what isincluded on the pallet andenables specific parts to befound more quickly. Job Ref. Client Delivery Date

10699 01/02/03

PALLET SIZE _______ PALLET 3_______OF_____12___

QTY SUPERDRUG Part No. Cardinal Part No. DESCRIPTION

1 D500BH C6930-00 Bottle Hopper

found more quickly.

Some pallets may have severalparts packed upon it especiallyif they are small.

Retain all pallet sheets forfuture reference untilconsignment has beenunpacked and checked off. 1 D500BH C6930-00 Bottle Hopperunpacked and checked off.

PICKED/PACKED BY ___________________________ DATE ___________________

CHECKED BY _________________________________ DATE ___________________

Pallet Contents Sheet

Page 2

Typical Dispensary OverviewPlease refer to Superdrug site specific layout drawing for exact configuration of units

Recognition Manual & Installation Guide 2014 Page 3


Typical Dispensary OverviewPlease refer to Superdrug site specific layout drawing for exact configuration of units

Page 4


Typical Consultation Room OverviewPlease refer to Superdrug site specific layout drawing for exact configuration of units

Page 5

Typical Nurses Room OverviewPlease refer to Superdrug site specific layout drawing for exact configuration of units

Page 6Recognition Manual & Installation Guide 2014

Critical Dimensions600mm x 377mm x 750mm600mm x 377mm x 750mm

Installation Detail

•Ensure open end faces wallunits and closed end facespatient•Use appropriate fixings to fixto wall

Part no CN377DDP Drop Down Desk


Critical Dimensions500x500x912mm500x500x912mm

Installation Detail

•Level using adjustable feet.•Use appropriate fixings to fixthrough to wall & neighbouringunits

If bin is used in thiscupboard pleaseremove lid

Part no CN500DCU Drawer & Cupboard Unit


Critical Dimensions500x500x912mm

Installation Detail

•Level using adjustable feet.•Use appropriate fixings to fixthrough to wall & neighbouringunits.•If Needle Exchange chute isrequired cut worktop usingchute as a template.•For Sharps Flap specificationplease see page 34

Installation Detail

•Waste Bin to stand inside one of thelockable storage cupboards

CN500LSC Lockable Storage CupboardDCN0B Waste Bin

please see page 34


Back of unit is open to allow accessto power and data sockets


Installation Detail

•Level using adjustable feet.•Use appropriate fixings to fixthrough to wall & neighbouringunits

Part no CN500PFU mm Printer & File Unit



Installation Detail

•All wall units should be fixed 550mm abovefinished worktop to allow for splashback•Use appropriate fixings to fix to wall•Use white screw caps to cover any visible screws

Part no CN500WLH Wall Cupboard R/HPart no CN500RLH Wall Cupboard L/H



Installation Detail

•All wall units should be fixed 550mm abovefinished worktop to allow for splashback•Use appropriate fixings to fix to wall•Use white screw caps to cover any visible screws

Part no CN500WOS Wall Mounted Open Shelves


Cross logo suppliedby signage contractor

Critical DimensionsCritical Dimensions2040 x 926 x 45mm

Installation Detail

•Sent to site without blind orhinges attached (but supplied)to enable door to be handed onsitesite

•Door is supplied withundercoat. Top coat must beadded on site

•Fix blind to rear of door usingappropriate fixings

•Fix door hook to rear of door

Part no CN926WD Consultation Room Door

•Fix door hook to rear of doorcentralised at 1600mm high


CT34069 Paper Towel DispenserNB Key to open dispenser isincluded and should behanded to Pharmacy manager

DCN0WHS Wall MountedHand Sanitiser

265mm x 156mm x 96mm


Splash Back

Pre Laid Brushed AluminiumMDF

265mm x 156mm x 96mm

Installation Detail

•Use appropriate fixings orgripfill to fix splash back.•Add ancillary items to positionsindicated on elevation•Please ensure that there isenough clearance above towel

CN00WGD Wall Mounted GloveDispenser 100mm x 270mm x95mm

Part no CN2000SB Splash Back

enough clearance above toweldispenser to allow with openingkey


95mm

Page 14

Installation Detail

•Cut worktop to length•Edge any exposed ends•Fit to top of base units using appropriate fixings•Fit to top of base units using appropriate fixings•Cut hole for sink and mixer tap as indicated on layoutdrawing•Cut hole for Sharps flap if required•Fix plinth to base units using gripfill or appropriatefixings

Part no D3000WW WorktopPart no CN00S Sink

CN2000PCBBrushed Aluminium Laminate

CN00SF Sharps Flap fittingdetail


Part no CN00S SinkPart no CN00MT Mixer TapPart no CN00SF Sharps FlapPart no CN2000PCB Plinth to Base Unit

Brushed Aluminium Laminatefaced mdf plinth 2000mm x100mm x 18mm

Page 15

DCN0WPT Wall Mounted Paper Towel Dispenser

NoteKey to open towel dispenser isincluded and should be handed toPharmacy manager

D00SBW – Splash Bach Wall unit

Critical Dimensions600mm high x 990m wide x 12mm thick

Installation Detail

•Use appropriate fixings or gripfill to fix splash back

DCN0WHS Wall MountedHand Sanitiser

D00CM Conical Measure Holder200mm high x 370mm wide x

•Use appropriate fixings or gripfill to fix splash backabove bottle rack & sink unit•Seal joint with white silicon•Add ancillary items to positions indicated onelevation

Ancillary items

• DCN0WHS Wall Mounted Hand Sanitiser• DCN0WPT Wall Mounted Paper Towel Dispenser

Part no D00SBW – Splash Back Wall Unit


Hand Sanitiser265mm x 156mm x 96mm

200mm high x 370mm wide x150mm depth

• DCN0WPT Wall Mounted Paper Towel Dispenser• D00CM Conical Measure Holder

Page 16


Installation Detail

•Ensure unit is level usingadjustable feet•Use appropriate fixings to fixthrough to neighbouring unit.

and to underside of worktop•A void to rear of unit and wall Capacity: 39 Litres

Part no. D400BN Bin Cupboard including pvc bin


•A void to rear of unit and wallallows for plumbing etc.

Page 17

Capacity: 39 LitresDimensions: 500mm x 380mmx 280cm

N.B. Cabinets are only to be fixed to concrete floor or structural wall with rag bolts


Installation DetailInstallation Detail

•Position on floor as indicatedon layout drawing•Fix only to concrete floor orstructural wall with rag bolts

Part no CDC906 – Controlled Drugs Cabinet


Critical Dimensions

500x520x920mm

Installation Detail


and to underside of worktop•A void to rear of unit and wall

Part no D500BH Bottle Hopper

•A void to rear of unit and wallallows for plumbing etc. Note

Bottles not supplied



NoteBottle rack is removable toallow access to waste & waterheater .

Installation Detail

•Cut hole in back to allowaccess to plumbing•Ensure unit is level usingadjustable feet•Use appropriate fixings to fixthrough to neighbouring unit.

and to underside of worktop

Part no D500BSU - Bottle Rack & Sink Unit

heater .


and to underside of worktop•A void to rear of unit and wallallows for plumbing etc.

Page 20


Note1no adjustable shelf to

Installation Detail



Part no D500DP - Doop Unit Small

1no adjustable shelf toeach unit.



Page 21


NoteIncludes 3no adjustable

Installation Detail



Part no. D500OP - Open Shelf Unit


Includes 3no adjustableshelves


Page 22

Critical Dimensions

500x520x920mm

NoteSuited locks to fullrange, each drawer hasbinning strip withacrylic dividers.

Installation Detail



Part no. D500RX - Prescription Storage

acrylic dividers.



Page 23


Under Worktop End Panels

Installation Detail•Use top & bottom Uchannel or appropriatefixings to fix to end unit.


Installation Detail

Under Worktop Boxed Corner

•Use appropriate fixings to fix U channel to underside ofworktop and floor.•Position first top & bottom U channels 530mm fromwall.•Position second set 550mm from adjacent wall•Panels are supplied oversized so that they can bescribed to fit•Slide panels into position and cover front corner withwhite PVC angle trim

Part no. D550UBC - Under Worktop Boxed CornerPart no. D550UEP - Under Worktop End panels

white PVC angle trim



NoteCut out to rear to enablecabling.

Installation Detail



Part no. D600IT - IT Unit

cabling.



Page 25

D18TEP Tall End Panel

Critical Dimensions D00BIS Brief Intervention ScreenCritical Dimensions3000x600x30mm

Installation Detail

•Panel has pre-drilled holes for fixing to perimeter post•Use appropriate fixings to fix end panel to perimeterpost•Use white screw caps to cover any visible screws•Seal joint to wall with white silicon

Installation Detail

•Fit screen between counter units asindicated on layout drawings•Use appropriate fixings to fix panel toFront shaped to match

D00BIS Brief Intervention Screen


Part no. D600TEP – Tall End PanelPart no. D00BIS – Brief Intervention Screen

Page 26Recognition Manual & Installation Guide 2014

•Seal joint to wall with white silicon •Use appropriate fixings to fix panel toadjacent units

Front shaped to matchcounter profile


Installation Detail

•Create boxed corner from 50mm x 50mm softwood andwhite MFC panels supplied•Use appropriate fixings to fit softwood to walls•Use appropriate fixings to fix panels into position andcover front corner with white PVC angle trim•Use white screw caps to cover any visible screws

Part no. D650TBC – Tall Boxed Corner

•Use white screw caps to cover any visible screws•If ceiling height exceeds 2400mm cut wall batons fromsoftwood provided and fix to wall to take lid


Part no. D760AZS - A-Z Medicine Starter Module

Part no. D760AZE - A-Z Medicine Extension Module

CautionIt is vital that system posts are installed in astraight line ,vertical and level and fixed at 2nopoints on each individual post utilising suppliedadjustable wall fixing brackets


1. Erect frame of perimeterlegs and tie bars usingM10x50mm bolts, washersand nuts. Use 3no tie barsper module.per module.

The tie bars are handed ,ensure bar faces front onbrackets

Do not over tighten.

2. Use adjustable feet to level

3. Use two wall fixingbrackets per upright, at alltimes using appropriatefixings to ensure posts areflush with each other2. Use adjustable feet to level

frame

flush with each other

Critical Dimensions 2100mm x 760mm x 610mm

7. Fit pull out shelves into postsstarting at bottom. The bottom shelfto occupy notches 11 & 13. Leave2no empty notches between eachsubsequent shelf

6. Slide into position baseplinth drawers

4. When all of the posts are inposition screw on the baseplinth covers.

5. Hang back panelson to tie bars

Critical Dimensions 2100mm x 760mm x 610mm


Part no. D760AZS - A-Z Medicine Starter Module

Part no. D760AZE - A-Z Medicine Extension Module

Page 30

Part no. D760FSS Finished Scripts Starter Module

Part no. D760FSE Finished Scripts Extension Module

CautionIt is vital that system posts are installed in astraight line ,vertical and level and fixed at 2nopoints on each individual post utilising suppliedadjustable wall fixing brackets


1. Build frame as in A-Zmodules but use “L” shapedposts rather than “h” shapedposts

2. Start at bottom and fitdeep drawers into lowestpossible notches

3. Fit lower pull out shelfinto notch 41 and thenleave 3no. notchesbetween each shelf above

4. Fit opal acrylic fronts to5no. Pull out shelves

D760UEC Universal End Drawer Cover1. Use Universal End Drawer cover on proceeding A-Zmodule if Finished Scripts module is part of same run

5no. Pull out shelvesmodule if Finished Scripts module is part of same run


Enablestransition fromA-Z “h” leg toFinished scripts“L2 leg



Part no. D760FSE Finished Scripts Extension Module

Page 32

Part no. D760UEC Universal End Drawer Cover


Installation Detail



Part no D1000DP - Doop Unit Large

Note1no adjustable shelf.



Page 33


NoteIncludes 3no adjustable

Installation Detail




Includes 3no adjustableshelves


Part no. D1000OP - Open Shelf Unit

Page 34

Accuracy Checking Area Worktop

The accuracy area is indicated on the layout


The accuracy area is indicated on the layoutdrawing by the dotted area


White work tops

Installation Detail

•Cut to appropriate length as required on site•Exposed ends should always overrun 25mm•Edge all exposed ends•Create a masons mitre for all corner joints•Use 3no work top connectors to all joints•Use appropriate fixings to fix top to units

3000x600x30mm

Installation Detail•Where indicated on layout drawing fit grey wok top•Exposed ends should always overrun 25mm•Edge all exposed ends•Create a masons mitre for any corner joints•Use 3no work top connectors to all joints•Use appropriate fixings to fix top to units underneath•Seal joint to wall with white silicon

Part no. D3000WW - White WorktopPart no. D1000GW - Grey Worktop

•Use appropriate fixings to fix top to unitsunderneath•Seal joint to wall with white silicon

•Seal joint to wall with white silicon


Consultation Ancillary ItemsPart no CN00WA Chair without ArmsPart no CN00A Chair with Arms

Installation Detail

•Position all ancillary items asper layout drawing

Part no CN00A Chair with ArmsPart no CN00HM Height measurerPart no CN00WS Weighing scales

per layout drawing•Use appropriate fixings to fixheight measurer to wall


Adjustable Spur MFC Shelves

Critical Dimensions250x990x18mm per shelfSent to site as a set of 5no shelves,2no 710mm spur uprights & 5nopairs of 200mm brackets

Installation Detail

D900NBNotice board to be fixed to wallwhere indicated on layoutdrawing

•Set Spur 150mm above the worktopto allow space for low level (90mm)electrical trunking. Set low leveltrunking flush with worktop to allowa 60mm gap between top oftrunking and the underside of thebottom spur shelf.•Make allowances for IT Monitorswhen setting out on site.

drawing

Part no D1000ASS - Adjustable Spur MFC Shelves

when setting out on site.•Use appropriate wall fixings.

D00BE•If Bookends are specified leaveloose on spur shelves for use bypharmacy team

D150EMErgo mat to be loose laid asindicated on layout drawingPart no D1000ASS - Adjustable Spur MFC Shelves

Part no D00BE - BookendsPart no D900NB - Notice BoardPart no D150EM - Ergo Mat


indicated on layout drawing

Page 37


The Nurses Room is similar to the Consultation Room but is largerand includes a treatment couch, curtain and curtain rail

Critical Dimensions780mm high x1930mm long x600mm deep

Part no N00EC Examination CouchPart no N00CR Couch RollsPart no N00CC Cubicle CurtainPart no N00CR Curtain Rail

Installation Detail

600mm deep

Nurses Room Overview

Part no N00CR Curtain Rail


•Fix Curtain rail to ceiling asindicated on layout drawing

Page 39

Pedestal desk

Critical DimensionsCritical Dimensions730mm high x 1200 length x800mm deep

Examination lamp

Installation Detail

•Use appropriate fixings to fit rail toThree quarter mirror

Office chair

•Use appropriate fixings to fit rail towalls at 1100mm high•Slot lamp on to rail•Electrical contractor to wire to spurwith flexi cable

Three quarter mirror1500mm high x 500 wide

Installation Detail

•Use appropriate fixings to fit mirrorto wall 400mm from the floor•Use mirro screw caps to coverfixings

Nurses Room Overview


Critical Dimensions1130mm high x 470 width x 470mm deep

Installation Manual 2014 (March)

Documents

worktop end panel 24d600it

pallet size

worktop boxed corner

scripts starter module

scripts extension module

description pagecn377ddp

description pagecn00a

14cn2000pcb plinth cover