Installation GuideTickerplay LTI Series
Installation GuideTickerplay
(PSTI Series)
Photonplay Sytems Inc. | www.photonplay.com
1
Installation GuideTickerplay LTI Series
Contents1. Parts List2. Required3. Tools 4. Installation Steps
Parts List
1. Ticker Bar
2. Z-Bar
3. L-key nut
4. L-key driver
Ticker Bar
Quantity: 3
Photonplay Sytems Inc. | www.photonplay.com
2
Installation GuideTickerplay LTI Series
Fish Plates
Quantity: Straight-4, Purpose: To be put on joint of the ticker and the corner where the two tickers meet.
Z-Bar
Photonplay Sytems Inc. | www.photonplay.com
3
Straight Fish Plate
Installation GuideTickerplay LTI Series
Quantity: -3
Purpose: To be fixed on the wall and the ticker will be hung on it like a photo frame
L Key Bolt
Quantity: ……….
Purpose: Required to join together Fish Plates and ticker chassis on joints
L Key Bolt Driver
Quantity: 1-2
Purpose: Driving the L Key bolts.
Photonplay Sytems Inc. | www.photonplay.com
4
Installation GuideTickerplay LTI Series
Tools RequiredSr no Item Picture
1. PVC Gitti
Photonplay Sytems Inc. | www.photonplay.com
5
Installation GuideTickerplay LTI Series
2. Wall Screws
Installation Steps
Step 1
Unboxed the ticker and look for all the parts listed above
Step 2
1. Unboxed the 1 cardboard box. 2. Open the cardboard boxes and separate all the tickers by opening up the thin sheet
wrap around them and keep them on the ground or any appropriate surface.
3. Look for the ticker from where the AC wire for the power must be hanging as shown below. Keep in mind that the ticker will be positioned in this position as shown and will be hung up.
Photonplay Sytems Inc. | www.photonplay.com
6
Installation GuideTickerplay LTI Series
1st Ticker Bar.
Step 3 – Socket Side To cover the wall of 189 inches
1. Look for the one ticker bars which are 63 inches in length, 2nd And 3rd is also same length and connect with the all 3 ticker joint bar which are 63+63+63=189 inches in length. All are Power socket side ticker war length.
Photonplay Sytems Inc. | www.photonplay.com
7
Installation GuideTickerplay LTI Series
Before mounting, remember to cross check if all the joints and the fixes of the wires and the ticker are properly done by switching on the power supply and checking the ticker.
1. After all the jointing and fixing, your ticker would something look like this .
Photonplay Sytems Inc. | www.photonplay.com
8
Installation GuideTickerplay LTI Series
Photonplay Sytems Inc. | www.photonplay.com
9
Installation GuideTickerplay LTI Series
Step 4 Now, the ticker installation is complete. Now, we will hung the ticker on the wall.
1. Fixing Z-Bar on the wall
Step 5
Place the ticker on the Z-Bar fixed on the wall
Photonplay Sytems Inc. | www.photonplay.com
10
Installation GuideTickerplay LTI Series
Photonplay Sytems Inc. | www.photonplay.com
11
Installation GuideTickerplay LTI Series
After your ticker is hung on the wall, it will look something like the pictures shown below as one of our previous installations.
Photonplay Sytems Inc. | www.photonplay.com
12
Installation GuideTickerplay LTI Series
Now finally ticker installation is complete!!!
Plug in the Ticker to AC supply and enjoy streaming Stock Updates.
Write us in case of any clarification required on installation at [email protected]
Photonplay Sytems Inc. | www.photonplay.com
13
RegardsLarry and Ash
Sales and Customer SupportTickerplay Signs [email protected]
Installation GuideTickerplay LTI Series
Photonplay Sytems Inc. | www.photonplay.com
14