Hydraulic Pilot Control ValvesHT 73 / B / 103 / 0308 / E
23 to 51 cm3/rev (1.4 to 3.1 cu.in/rev)280 bar (4000 ps i) peak pressure
HANDLESMULTIFUNCTION ERGONOMIC
AND KNOBS
HPVL/SPVL SERIESHYDRAULIC PILOT CONTROLS
PRSVS/M SERIESSINGLE AND SECTIONAL PILOT CONTROL VALVES
PRSVB/L SERIESONE AND TWO LEVER OPERATED
PILOT CONTROL VALVES
HPV SERIES HYDRAULIC PILOT CONTROLS
PRSVP SERIESFOOT PEDALS
SUH SERIES PILOT SUPPLY UNITS
OIL SAMPLING VALVE
Via M.L. King, 6 - 41122 MODENA (ITALY)
Tel: +39 059 415 711
Fax: +39 059 415 729 / 059 415 730
INTERNET: http://www.hansatmp.it
E-MAIL: [email protected]
HYDRAULIC COMPONENTS
HYDROSTATIC TRANSMISSIONS
GEARBOXES - ACCESSORIES
CPVL SERIES HYDRAULIC PILOT CONTROLS
HT 73 / B / 103 / 0308 / E Pag. 3
Hydraulic Pilot Control Valves
CONTENTS
Handles
Hydraulic Pilot Control HPVL / SPVL Series
Single and Sectional Pilot Control PRSVS / M Series
Hydraulic Pilot Control CPVL Series
One and Two Lever Operated Pilot Control Valves PRSVB / L Series
Hydraulic Pilot Control HPV Series
Foot Pedal Hydraulic Pilot Control PRSVP Series
Pilot Supply Units SUH Series
Characteristic Curves
Oil Sampling Valves
5 - 15
17 - 22
23 - 29
31 - 34
35 - 41
43 - 45
47 - 51
53 - 57
59 - 65
67 - 69
HT 73 / B / 103 / 0308 / E Pag. 5
Hydraulic Pilot Control Valves
HANDLESMULTIFUNCTION ERGONOMIC
AND KNOBS
Pag. 6 HT 73 / B / 103 / 0308 / E
Hydraulic Pilot Control Valves
H A N D L E S INT R ODUC T ION
H A N D L E S E R G ONOMIC AND K NOB MODE L C ODING
K - K S E R I E S K N O B S
s ee page 3
K B = K nob without electric s witch
K C = K nob without electric s witch
K J = C onical handle with electric s witch
K K = K nob without electric s witch
K L = C onical handle without electric s witch
K P = S pherical knob without electric s witch
K W = K nob with electric s witch
S - S S E R I E S E R G O N O M I C
s ee page 4
S A = Handle without electric s witch
S D = Handle with electric s witch
S S = Handle with electric s witch to clos eand s afety button
S X = Handle with electric s witch to clos e
S Y = Handle with electric s witch dualrocker type
S Z = Handle with electric s witch to clos ewith detent
H A N D L E S A N D K N O B S
T he handles and knobs included in this catalogue
are available for fitting either to the extens ive range
of our pilot valve product
T he materials are chosen to be suitable for either
internal or external use and are res istant to ultra-
violet effects . T hey are also suitable for a wide
range of other environmental conditions .
T he standard straight ergonomic handle is
available with a range of switches and push
buttons , while the MF E handle range is available
with an extens ive range of switches and push
buttons to suit different operating and
environmental conditions . T he MF E handle
range can be configured to suit either left hand
or right hand operation.
Different circuit arrangements can be
accommodated within the handle and the wiring
can be built into connectors to customer
s pecifications .
B E N E F I T S
R ange of knobs for individual lever control
R ange of s traight levers , with and without s witches ,for dual axis controls
E xtens ive range of s tylis h multi functional leveroptions
E xtens ive range of electrical s witch and buttonoptions
Adaptable to both Hansa-Tmp s.r.l. andother manufacturers equipment
C ircuits and connectors to cus tomer requirements
S witch options allow left hand or right hand operation
Tolerant to many environmental conditions
High durability, low maintenance
HT 73 / B / 103 / 0308 / E Pag. 7
Hydraulic Pilot Control Valves
K S E R I E S H A N D L E S T E C HNIC AL DATA
K B
T y pe : S A
K N O B
without electric switch
K C K N O B
without electric switch
K J C O N I C A L H A N D L E
with electric switch
K K K N O B
without electric switch
K L C O N I C A L H A N D L E
without electric switch
K P S P H E R I C A L K N O B
without electric switch
K W K N O B
with electric switch
wiringdiagram
ø34 (1.34)
M10 ø10 (0.39)
ø45 (1.77)
40
(1
.57
5)
67
(2
.64
)
50
(1
.97
)
65
(2
.56
)
8 (
0.3
15
)
ø32 (1.26)
ø60 (2.36)
M12
66
.5 (
2.6
2)
18
(0.7
1)
ø8 (0.315)
ø27 (1.06)
25
(0
.98
)
42
(1
.65
)
ø45 (1.77)
42
(1
.65
)
ø12 (0.47)
21
(0
.83
)
wiring diagram
ø32 (1.26)
ø10 (0.39)
56
(2
.21
)
ø10 (0.39)
Pag. 8 HT 73 / B / 103 / 0308 / E
Hydraulic Pilot Control Valves
S S E R I E S H A N D L E S T E C HNIC AL DATA
S A
T y pe : S A
E R G O N O M I C H A N D L E
without electric switch
S D
S X E R G O N O M I C H A N D L E
with electric switch to close
S Y E R G O N O M I C H A N D L E
with electric s witch dual rocker type
S Z E R G O N O M I C H A N D L E
with electric switch to close with detent
wiring diagram wiring diagram wiring diagram
16
7 (
6.5
75
)
ø39.5 (1.56)
ø52 (2.05)
ø39.5 (1.56)
ø52 (2.05)
ø39.5 (1.56)
ø52 (2.05)
ø39.5 (1.56)
12
3 (
4.8
4)
11
3 (
4.4
5)
16
7 (
6.5
75
)
12
3 (
4.8
4)
11
3 (
4.4
5)
16
7 (
6.5
75
)
12
3 (
4.8
4)
11
3 (
4.4
5)
16
7 (
6.5
75
)
12
3 (
4.8
4)
11
3 (
4.4
5)
ø52 (2.05)
29
(1.1
4)
20
(.7
9)
15
(.5
9)
29
(1.1
4)
20
(.7
9)
15
(.5
9)
29
(1.1
4)
20
(.7
9)
15
(.5
9)
29
(1.1
4)
20
(.7
9)
15
(.5
9)
M10
17 (0.67)
ø19 (0.75)
M10
17 (0.67)
ø19 (0.75)
M10
17 (0.67)
ø19 (0.75)
M10
17 (0.67)
ø19 (0.75)
E R G O N O M I C H A N D L E
with electric switch
wiring diagram
ø52 (2.05)
ø39.5 (1.56)
16
7 (
6.5
75
)
12
3 (
4.8
4)
11
3 (
4.4
5)
29
(1.1
4)
20
(.7
9)
15
(.5
9)
M10
17 (0.67)
ø19 (0.75)5
6 (
2.2
05
)
P 2
P 1
P1 P2
S S E R G O N O M I C H A N D L E
wiring diagram
ø52 (2.05)
ø39.5 (1.56)
16
7 (
6.5
75
)
12
3 (
4.8
4)
11
3 (
4.4
5)
29
(1.1
4)
20
(.7
9)
15
(.5
9)
M10
17 (0.67)
ø19 (0.75)
with electric switch to close and safety button
HT 73 / B / 103 / 0308 / E Pag. 9
Hydraulic Pilot Control Valves
H A N D L E S MF E MODE L C ODING
E X X X X X X X - X X - X X X X + X
R o c k e r s w it c h (omit digit if not required )
This vers ion is not available in combination with pus h buttons witches types B and D.
P = Horizontal mounting with function s ymbols , rated for 6 A at 250 VAC
Q = Vertical mounting with function s ymbols , rated for 6 A at 250 VAC
R = Long life vers ion (106 cycles ), rated for 3 A at 30 VDC
S = Waterproof IP 68 rated for 10 A at 250 VAC(can be mounted in either horizontal or vertical pos ition)
M o unt ing a da pt e r (s ee page 5)
0 = s tandard s traight M10x1.5
1 = tilted 15° north
2 = tilted 15° eas t
3 = tilted 15° wes t
4 = combined tilting (15° north and 10° eas t) = LH handle
5 = combined tilting (15° north and 10° wes t) = R H handle
6 = with s pherical joint, adjus table from 0° up to 20° in any direction
7 = as item 6 + bottom mounting adapter
G a it e r c o l la r (s ee page 6)
O = bas ic vers ion without provis ion for protection boot
R = with provis ion for round boot
S = with provis ion for s quare boot
W ir ing t e r m ina t io n
0 = no leads
1 = flying leads
2 = with connector (maker and model number to be s pecified on order)
S a fe t y t r igge r in po s i t io n 7
X = no s afety trigger
T = with s afety trigger (available only red)
P u s h bu t t o n /s w it c h in po s i t io n s 8 + 1 5
(not applicable for s witch configuration B )F or each pus h button/s witch, ins ert ID pos ition numbers and colours(s ee 1÷6 pos ition) s eparated by “-“ and omit ones that are not required(i.e. 8R -10G = red pus h button/s witch in pos ition 8 and green pus hbutton/s witch in pos ition 10)Note: pus h button/s witch in pos ition 8 is rated 0.4 A at 32 VDC andavailable only red
P u s h bu t t o n /s w it c h in po s i t io n s 1 + 6
Ins ert ID letter for each pus h button/s witch chos en on the following lis tand in progres s ive s equence from pos ition 1 up to pos ition 6:
X = no button s witch
B = blue
G = green
R = red
Y = yellow
W = white (available for C configuration only)
L = s ignalling light
MF E = Multi-function E rgonomic
P u s h bu t t o n /s w it c h o pt io n s
A = s tandard with micro s witchesrated for 3 A at 30 V DC
B = s ealed vers ion with micros witchesrated for 3 A at 30 V DC + P C B
C = is olated vers ion (IP 67) with micros witches rated for 0.4 A at 30 VDC
D = dual axis / 4 contacts waterproofmicro s witches rated for 2 A at 30V DC (conformS with MIL s tandards )
(se
e p
ag
e 4
)
Pag. 10 HT 73 / B / 103 / 0308 / E
Hydraulic Pilot Control Valves
1 7P
QRS
1 21 3
1 41 51 6
78
91 01 1
2
3
456
1
1 2 3 4 5 6 7 8 9 1 0 1 1 1 2 1 3 1 4 1 5 1 6 1 7 P Q R SP U S H B U T T O N R O C K E R
RO
CK
ER
PU
SH
BU
TT
ON
1 7P
QRS
1 21 3
1 41 51 6
78
91 01 1
2
3
456
1
1 2 3 4 5 6 7 8 9 1 0 1 1 1 2 1 3 1 4 1 5 1 6 1 7 P Q R SP U S H B U T T O N R O C K E R
RO
CK
ER
PU
SH
BU
TT
ON
H A N D L E S MF E P US H B UT TONS C OMPAT IB ILIT Y TAB LE S
C ompatibility ofpus h button/s witchesand roc ker s witc hescombinationsF or S ealed B uttonType B
(Applicable only forpus h button/s witchesfitted into pos itions1 up to 6 and s afetytrigger in pos ition 7.)
C ompatibility ofpus h button/s witchesand roc ker s witc hescombinationsF or S tandard B uttonType A
17
16
1215
1
2 3
4
5 6
8
7
13 14
11
10
9
available combination
not available
KEY
HT 73 / B / 103 / 0308 / E Pag. 11
Hydraulic Pilot Control Valves
1 7P
QRS
1 21 3
1 41 51 6
78
91 01 1
2
3
456
1
1 2 3 4 5 6 7 8 9 1 0 1 1 1 2 1 3 1 4 1 5 1 6 1 7 P Q R SP U S H B U T T O N R O C K E R
RO
CK
ER
PU
SH
BU
TT
ON
**
*
*
****
****
1 7P
QRS
1 21 3
1 41 51 6
78
91 01 1
2
3
456
1
1 2 3 4 5 6 7 8 9 1 0 1 1 1 2 1 3 1 4 1 5 1 6 1 7 P Q R SP U S H B U T T O N R O C K E R
RO
CK
ER
PU
SH
BU
TT
ON
H A N D L E S MF E P US H B UT TONS C OMPAT IB ILIT Y TAB LE S
C ompatibility ofpus h button/s witchesand roc ker s witc hescombinationsF or Dual Axis B uttonType D
C ompatibility ofpus h button/s witchesand roc ker s witc hescombinationsF or Is olated B uttonType C
(*) Als o compatible incombination with alight (L) fitted inpos ition 1
(**) Als o compatible incombination with alight (L) fitted inpos ition 4
17
16
1215
1
2 3
4
5 6
8
7
13 14
11
10
9
available combination
not available
KEY
Pag. 12 HT 73 / B / 103 / 0308 / E
Hydraulic Pilot Control Valves
H A N D L E S MF E B UT TON T Y P E S AND P OS IT ION OP T IONS
MF E Multi F unctionE rgonomic handle fittedwith 2 dual axis (4 contacts )waterproof mini push buttons witches (Type D) to MILstandards
MF E Multi F unctionE rgonomic handlefitted with s tandardpus h button s witches(Type A) and verticalmounted rocker s witchand safety trigger(left view).
MF E Multi F unctionE rgonomic handle fittedwith s ealed pus h buttons witches (Type B ) mountedon P C B and mounting adaptoradjus table in any direction from0 up to 20°.
S tandard P us hB utton S witc h
T y pe A
ø10 (.39)
2.5
(.1
0)
S ealed P us hB utton S witc hT y pe B
ø14 (.55)
5 (
.20
)
Is o lated P us hB utton S witc h
T y pe C 6 (
.24
) Dual Axis P us hB utton S witc hT y pe D
ø18 (.71)
10
(.3
9)
ø17.5 (.69)
9 (
.35
)
ø10 (.39)
4.5
(.1
8)
33 (1.30)
S nap pus hbutton s witc h
(as fitted to front ofhandle in pos ition 8) S ignalling L E D (code L )
S a fety Tr igger
(as fitted to front ofhandle in pos ition 7)
A B
C D
S T A N D A R D S E A L E D
I S O L A T E D D U A L A X I S
MF E Multi F unctionE rgonomic handlefitted with 8 waterproofpus h button s witches(Type C ), two s ignallingLE D's and a s afety pus hbutton s witch on frontpos ition 8.
ø17.5 (.69)
HT 73 / B / 103 / 0308 / E Pag. 13
Hydraulic Pilot Control Valves
5 C O M B I N E D T I L T I N G L E F T H A N D
3 T I L T E D 1 5 o L E F T H A N D 4 C O M B I N E D T I L T I N G R I G H T H A N D
H A N D L E S MF E MOUNT ING ADAP T E R S
0 S T A N DA R D S T R A I G H T 1 T I L T E D 1 5 o F O R W A R D 2 T I L T E D 1 5 o R I G H T H A N D
6 W I T H B A L L J O I N T
7 W I T H B A L L J O I N T A N D
M O U N T I N G A D A P T E R
17 (0.67)
ø16 (0.63)
13
(0.51)
7(0
.27
5)
7(0
.27
5)
ø20 (0.79)
17 (0.67)
7(0
.27
5)
ø20 (0.79)
17 (0.67)
7(0
.27
5)
ø20 (0.79)
17 (0.67)
7 (
0.2
75
)
ø20 (0.79)
17 (0.67)
7 (
0.2
75
)
ø20 (0.79)
M30 x 1
30 (1.18)
20o MAX 20o MAX
10o
15o15o
15o 15o
20o MAX 20o MAX
M10x 1.5
11
(0.4
3)
10o
15o
M10 x 1.5
11
(0
.43
)
M10 x 1.5
11
(0.4
3)
M10 x 1.5
11
(0.4
3)
M10 x 1.5
11
(0.4
3)
M10 x 1.5
11
(0
.43
)
30 (1.18)
M30 x 1
M27 x 1.5
7 (
0.2
75
)
10
(0
.39
)
90o
9.5
(0
.37
5)
M30x 1
ø26
ø15
5 (
0.2
0)
12
(0
.47
)
146 (5.75)Ty pic a l H a ndleH eight for theMF E R a nge
Pag. 14 HT 73 / B / 103 / 0308 / E
Hydraulic Pilot Control Valves
H A N D L E S MF E R OC K E R S W IT C HE S
P H O R I Z O N T A L L Y M O U N T E D S W I T C H Q V E R T I C A L L Y M O U N T E D S W I T C H
R L O N G L I F E S W I T C H S W A T E R P R O O F S W I T C H I P 6 8
31
.5 (
1.2
4)
14(0.55)
31
(1
.22
)
16(0.63)
31
.5 (
1.2
4)
25 (0.985)
31.5 (1.24)
14
(0.5
5)
W aterproof and IP 68 ratedfor 10A at 250 VAC
C an be mounted eitherhorizontally or vertically
T he long life vers ion (106)is rated for 3A at 30 VDC
T his vers ion hasfunction s ymbolsand is rated for6A at 250 VAC
T his ve rs ion ha sfunction s ymbolsand is rated for 6Aat 250 VAC
E lectrical life = 10,000 operations E lectrical life = 10,000 operations
E lectrical life = 106 operationsif diode s uppres s ion is fittedacross the s olenoid
E lectrical life = 50,000 operations
HT 73 / B / 103 / 0308 / E Pag. 15
Hydraulic Pilot Control Valves
H A N D L E S P R OT E C T IV E B OOT S
R R O U N D P R O T E C T I O N B O O T
S S Q U A R E P R O T E C T I O N B O O T
S HOW ING G AITE R C OL L ARF OR S TANDAR D S TR AIG HTMOUNTING ADAP TE R
S HOW ING G AITE R C OL L AR F ORTILTE D MOUNTING ADAP T E R
S HOW ING G AITE R C OL L ARF OR S TANDAR D S TR AIG HTMOUNTING ADAP TE R
S HOW ING G AITE R C OL L AR F ORTILTE D MOUNTING ADAP T E R
ø16 (0.63)
3
(0.1
2)
79
.5 (
3.1
3)
ø20 (0.79)
ø16 (0.63)
3
(0.1
2)
79
.5 (
3.1
3)
ø20
(0.79)
86 (3.39)
5 (
0.2
0)9
2.4
(3
.64
)
ø40 (1.575)
3 (
0.1
2)
97 (3.82)
86 (3.39)
5 (
0.2
0)9
2.4
(3
.64
)
ø40 (1.575)
3 (
0.1
2)
97 (3.82)
HT 73 / B / 103 / 0308 / E Pag. 17
Hydraulic Pilot Control Valves
HPVL / SPVL SERIESHYDRAULIC PILOT CONTROL
Pag. 18 HT 73 / B / 103 / 0308 / E
Hydraulic Pilot Control Valves
H P V L / S P V L S E R I E S INT R ODUC T ION
L O A D E R T Y P E P I L O T C O N T R O L S
HP V L and S P V L P ilot C ontrol Valves are part
of the comprehensive range of our
Hydraulics product, and with the inclus ion of
electrical detents are des igned specifically for
W heeled Loader applications .
T he product is supported by an extens ive
range of control curve characteris tics and
handle options , and can be supplied to control
either two service or three service loader
applications .
Our engineers can offer specialis t support to
optimise this product to suit your application.
T he product is supported by a comprehensive
S ales and S ervice facility around the world.
B E N E F I T S
C ompact and light weight
All ports on bottom face for eas e of ins tallation
S tylis h good looks s uitable for modern cabs
Operator insulated from high temperaturecomponents
P roven, s imple pressure reducing elements
W ide range of low hys teres is , high accuracypressure control curves
W ide range of electrical options in both s tandardand multi-functional ergonomic handles
E lectrically releas able detents available asrequired
Low effort lever control
H P V L /S P V L S E R I E S MODE L C ODING
X P V L 1 X X X X X X X X XR e t u r n s pr in g
0 = S tandard: 1.4 to 2.8 daN
1 = Light: 3.0 to 4.5 daN
2 = Medium: 7.5 to 13.8 daN
G a it e r
R = R ound
S = S quare
H P V L = Hydraulic P ilot C ontrol
S P V L = Hydraulic P ilot C ontrol
E xample: ordering number: HP VL 1 06 S A 015 S 1model number: HP VL 1 06 S A 015 S 1 / 123456
(as s igned number)
1 = Design Mark
M e t e r in g c u r v e
see P C V C HAR AC T E R IS T IC S catalogue
H a n dl e t y pe
W = W ithout Handle
see HA NDL E S catalogue
B a s ic m o de l t y pe
0 4 = To control 2 s ervices
0 6 = To control 3 s ervices
HT 73 / B / 103 / 0308 / E Pag. 19
Hydraulic Pilot Control Valves
H P V L S E R I E S T E C HNIC AL DATA
H P V L 1 0 4 F o r c o n t r o l o f B o o m a n d B u c k e t
P OWE R DOWN
R A I S E
T IP
C I R C U I T D I A G R A M
C R OWD
U2
TP
U1 U3 U4
28
0.5
(1
1.0
4)
MAX 27o
2 F O R S E R V IC E SMAX 20o
1 F O R S E R V IC E
11
5 (
4.5
3)
75
(2
.95
)5
9 (
2.3
2)
14
.35
(0
.56
5)
FL
AN
GE
ø104.3 (4.11)
102 (4.02)
ø40 (1.575)
Amp s ealed connector hous ing, part number 174984-2and Double-lock plate, part number 174985-7 for cap
S H OWN WI T HR OU N D B OOT
F I T T E D
125 (4.9
2)
100 (3.94)
27 (1.06)F R O N T
U2
T
P
U1
U3
U4
27
(1
.06
)
42.7
(1.68)
85 (3.35)
ø5
4 (2
.13
)
45
(1
.77
)
87
.5 (
3.4
4)
4 holes ø7.0 throequis paced as s hownon 110 P C D
Pag. 20 HT 73 / B / 103 / 0308 / E
Hydraulic Pilot Control Valves
HPVL SERIES TECHNICAL DA TA
HPVL106 F or control of Boom, Bucket and Auxiliary
SHOWN WITH
SQUARE BOOT
FITTED
POWER DOWN FLOAT ( 1 )
RAISE (3)
TIP
CROWD (2)
AUXILIARY (5)
AUXILIARY (6)
TIP (4) FRONT
4 holes ø6.5 throequispaced as shown
on 108 PCD
27
(1.0
6)
42.7 (1.68)
85 (3.35)
54 (2
.13)
42.5
(1.6
7)
87.5
(3.4
4)
105 (
4.13
)
27 (1.06)FRONT
U4
T
P
U1
U3
U2
54 (2.13)
U5
U6
ø131 (5.16)
110 (
4.33
)
95 (3
.74)
80 (3
.15)
36.8
MAX 26 o
2 FOR SERVICESMAX 21 o
1 FOR SERVICE
25o
ø27 (1.06)
258 (
10.1
6)11
5.5 (
4.55
)
75.5
(2.9
7)57
(2.2
4)
5 (0.
20)
3 (0.
12) 12
3.8 (
4.87
)
112 (
4.41
)23
0 (9.
06)
ø40 (1.575)
AUXILIARYSERVICE26o
AUXILIARYSERVICE
26o
20 (0
.79)
CIRCUIT DIAGRAM
U6
TP
U1 U3 U2 U4 U5
HT 73 / B / 103 / 0308 / E Pag. 21
Hydraulic Pilot Control Valves
S P V L S E R I E S T E C HNIC AL DATA
S P V L 1 0 4 F o r c o n t r o l o f B o o m a n d B u c k e t
S H OWN WI T HR OU N D B OOT
F I T T E D
U2 U3
94 (3.70)
4 holes ø9.0 thro
F R O N T
T P
13
4 (
5.2
8)
U4 U19
4.4
(3
.72
)
52
(2
.05
)
26(1
.02
)
50 (1.97)
99.5 (3.92)
44 (1.73) 6 (0.24)6
B OOMB U C K E T
2 3
15o
P OWE R DOWNF L OAT
R A I S E
T IP
C R OWD
F R O N T4 1
2 3
21o
4 2
21o1
28
(5
.04
) 8 (
0.3
15
)
75
.5 (
2.9
7)
56
(2
.20
)
25
5 (
10
.04
)
F R O N T
50 (1.97) 23 (0.91)
4 holesø9.0 thro
96 (3.78)
11
8 (
4.6
5)
96
(3
.78
)1
1 (
0.4
3)
M O U N T I N G P A N E L D E T A I L S(TOP VIE W )
C I R C U I T D I A G R A M
U4
TP
U1 U3 U2
Pag. 22 HT 73 / B / 103 / 0308 / E
Hydraulic Pilot Control Valves
S P V L S E R I E S T E C HNIC AL DATA
S P V L 1 0 6 F o r c o n t r o l o f B o o m , B u c k e t a n d A u x i l ia r y
S H OWN WI T HS QU A R E B OOT
F I T T E D
B OOMB U C K E T
2 3
15o
25o
6
ø27
(1.06)
U2 U3
144 (5.67)
6 holesø9.0 thro
F R O N T
T P
13
4 (
5.2
8)
U4 U19
4.4
(3
.72
)
52
(2
.05
)
26(1
.02
)
50 (1.97)
149.5 (5.89)
44 (1.73) 6 (0.24)6 (0.24)
50 (1.97)
U6
U5
F R O N T
50 (1.97)23 (0.91)
4 holesø9.0 thro
146 (5.75)
11
8 (
4.6
5)
96
(3
.78
)1
1 (
0.4
3)
100 (3.94)
M O U N T I N G P A N E L D E T A I L S(TOP VIE W )
21o
5 6
21o1
28
(5
.04
) 8 (
0.3
15
)
75
.5 (
2.9
7)
56
(2
.20
)
25
5 (
10
.04
)
21
0 (
8.2
7)
C I R C U I T D I A G R A M
U6U1 U3 U2
TP
U4 U5
R A I S EC R OWDA U X I L I A R Y
P OWE R DOWNF L OAT
T IP
F R O N T5 4
2 36
1
A U X I L I A R Y
HT 73 / B / 102 / 0308 / E Pag. 23
Hydraulic Pilot Control Valves
23 to 51 cm3/rev (1.4 to 3.1 cu.in/rev)280 bar (4000 ps i) peak pressure
PRSVS / M SERIESSINGLE AND SECTIONALPILOT CONTROL VALVES
Pag. 24 HT 73 / B / 102 / 0308 / E
Hydraulic Pilot Control Valves
P R S V S S E R I E S INT R ODUC T ION
H Y D R A U L I C P I L O T C O N T R O L
P R S V P ilot C ontrol Valves are part of
the comprehensive range of our
Hydraulics product.
T his product, with its individual lever control,
supported by an extens ive range of control
curve characteris tics and a choice of handle
options , makes it suitable for a wide range of
both mobile and industrial applications .
Our engineers can offer specialis t support to
optimise this product to suit your application.
T he product is supported by a comprehensive
S ales and S ervice facility around the world.
B E N E F I T S
C ompact and light weight
S ervice ports on bottom face with s upply andreturn ports on s ide faces for eas e of ins tallation
S imple to mount
C ompatible with a wide range of equipment
Operator is insulated from high temperaturecomponents
P roven, s imple pressure reducing elements
Wide range of low hys teres is , high accuracy,pressure control curves
R ange of electrical options within handle options
Low effort lever control
P R S V S S E R I E S MODE L C ODING
P R S V S X X X X X F X R e t u r n s pr in g
0 = S tandard: 1.4 to 2.8 daN
1 = Light: 3.0 to 4.5 daN
2 = Medium: 7.5 to 13.8 daN
3 = Heavy: 10.0 to 19.0 daN
F = S tandard C ontrol P lunger
P R S V S = S ingle Unit Hydraulic P ilot Valve S eries S
M e t e r in g c u r v e
see P C V C H A R AC T E R I S T I C S section
H a n dle t y pe
see H A N D L E S section
W = W ithout Handle
B a s ic m o de l n u m be r
O 1 = 2 s ervice ports with lever s pring returned into neutral
O 2 = 2 s ervice ports with lever detented in any pos ition
O 3 = 2 s ervice ports with lever detented in any pos ition andneutral pos ition sensor
O 4 = 2 s ervice ports with lever detented at both s troke ends
O 5 = 2 s ervice ports with lever detented in neutral pos ition
O 6 = 2 s ervice ports with lever detented in neutral pos itionand friction for detent in any pos ition
O 7 = 2 s ervice ports with lever detented at s troke end of U1s ide and s pring returned to neutral on U2 s ide
O 8 = 2 s ervice ports with lever detented at s troke end of U2s ide and s pring returned to neutral on U1 s ide
O 9 = 2 service ports with square mounting flange / rubberboot and multi-function ergonomic handle
HT 73 / B / 102 / 0308 / E Pag. 25
Hydraulic Pilot Control Valves
P R S V S S E R I E S T E C HNIC AL DATA
S I N G L E L E V E R P I L O T C O N T R O L V A L V E S T Y P E S
S ingle lever pivot control valves type S
are fitted with a protective rubber cover.
T hey can eas ily be modified from one model
to another s imply by replacing s ome of the
parts which are mounted on the lever
mechanism, ins ide the protective cover;
therefore installation dimensions are
common for any model.
T he following chart s hows a view of all the controlhandles and knobs which may be s upplied with thetype S control valve. F or details of each type s ee theHandles catalogue.
All models in the type S range can be fitted with amulti-function ergonomic handle. S ee next page.
type K Lcontrolhandles hown
T Y P E S A
95 (3.74)
110 (4.33)
36.8(1.49)
44
(1
.73
)
30
(1
.18
)
9 (
.35
5)
ø27 (1.06)
H Y D R A U L I C C I R C U I T D I A G R A M
PU1 T U2
ø14(.55)
ø27 (1.06)
4 (
0.1
6)
UN
LO
CK
ING
ST
RO
KE
26o 26o
70 (2.76)
80 (3.15)
3(0
.12
)
20
(0
.79
)
ø7
(0.2
75
)
35
(1
.38
)25
(0.9
85
)
81
.5 (
3.2
1)
11
2.5
(4
.43
)1
90
(7
.48
) fo
r h
an
dle
typ
e K
L (
as
dra
wn
)
T Y P E K B
U1 U2
P
T
T Y P E S D T Y P E S S
T Y P E K C T Y P E K J
T Y P E S X T Y P E S Y T Y P E S Z
T Y P E K K T Y P E K P T Y P E K W
plus type K L as s hown on main drawing
Pag. 26 HT 73 / B / 102 / 0308 / E
Hydraulic Pilot Control Valves
P R S V S S E R I E S T E C HNIC AL DATA
S I N G L E L E V E R P I L O T C O N T R O L V A L V E P R S V S 0 9
F or handle options available in the Multi-functionE rgonomic range, s ee the H a n dle s catalogue.
100 (3.94)
88 (3.46)
80 (3.15)
20
(0
.79
)
100 (3.94)
88 (3.46)
30
35
(1
.38
)2
5 (
0.9
85
)
11
2.5
(4
.43
)2
63
(1
0.3
5)
26o26o
T
P
100 (3.94)
88 (3.46)
70.7 (2.78)
80 (3.15)
10
0 (
3.9
4)
88
(3
.46
)
70
.7 (
2.7
8)
30
(1
.18
)
36.8
81 (3.19)
6 (0.24)
10 (0.39)
14.65 (0.24)
6 (
0.2
4)
14
.65
(0
.24
)
35
(1
.38
)
50
(1
.97
)
44
(1
.73
)3
4 (
1.3
4)
6.5
(0
.26
) x
4
U1 U2
E L E C T R I C C I R C U I T D I A G R A M
2 5 1 4 3 6 9 10
H Y D R A U L I C C I R C U I T D I A G R A M
T
P
U1 U2
HT 73 / B / 102 / 0308 / E Pag. 27
Hydraulic Pilot Control Valves
PRSVM SERIES INTRODUCTION
HYDRAULIC PILOT CONTROL
P R S V P ilot C ontrol Valves are part of
the comprehensive range of our
Hydraulics product.
T his product, with its individual lever control,
supported by an extens ive range of control
curve characteris tics and a choice of handle
options , makes it suitable for a wide range of
both mobile and industrial applications .
Our engineers can offer specialis t support to
optimise this product to suit your application.
T he product is supported by a comprehensive
S ales and S ervice facility around the world.
BENEFITS
Compact and light weight
Service ports on bottom face with supply andreturn ports on side faces for ease of installation
Simple to mount
Compatible with a wide range of equipment
Operator is insulated from high temperaturecomponents
Proven, simple pressure reducing elements
Wide range of low hysteresis, high accuracy ,pressure control curves
Range of electrical options within handle options
Low effort lever control
PRSVM SERIES MODEL CODING
PRSVM XX X XX F X R eturn spring
0 = S tandard: 1.4 to 2.8 daN
1 = Light: 3.0 to 4.5 daN
2 = Medium: 7.5 to 13.8 daN
3 = Heavy: 10.0 to 19.0 daN
F = S tandard Control Plunger
PRSVM = Sectional Hydraulic Pilot Valve Series M
Metering curve
see PCV CHARACTERISTICS section
Handle type
see HANDLES section
W = Without Handle
Basic model number
O1 = 2 service ports with lever spring returned into neutral
O2 = 2 service ports with lever detented in any position
O3 = 2 service ports with lever detented in any position andneutral position sensor
O4 = 2 service ports with lever detented at both stroke ends
O5 = 2 service ports with lever detented in neutral position
O6 = 2 service ports with lever detented in neutral positionand friction for detent in any position
O7 = 2 service ports with lever detented at stroke end of U1side and spring returned to neutral on U2 side
O8 = 2 service ports with lever detented at stroke end of U2side and spring returned to neutral on U1 side
Ordering key for multiple sectionsassembly of PRSVM series modulesas follows:
Settle the model number of eachindividual section, as shown on thecoding chart, starting from the inletsection (port P side) to the outletsection (port T side) and put them insequence.
For example: the complete modelnumber of a 2 sections assemblymade of M01 and M02 combination is:PRSVM01L001F0 + PRSVM02L015F0
Pag. 28 HT 73 / B / 102 / 0308 / E
Hydraulic Pilot Control Valves
P R S V M S E R I E S T E C HNIC AL DATA
SECTIONAL PILOT CONTROL VALVES TYPE M
S ectional pilot control valves type M
are particularly s uitable for thos e
applications where it is neces s ary to
reduce to a minimum ins tallation
dimensions , even when a relatively
high number of s ervices has to be
controlled. S ectional pilot control valves
type M are extremely flexible: a wide
range of control levers is available for
any model: s ingle units with as s embly
kit or multiple units fully as s embled
can be s upplied; eas y modification from
one model to another by replacing s ome
of the parts mounted on the lever
mechanism, within the rubber cover.
Type M control valves may be fitted with the followingknob types . F or details s ee the Handles catalogue.
PU1 T U2
H Y D R A U L I C C I R C U I T D I A G R A M
type K Lcontrolhandles hown
95 (3.74)
110 (4.33)
44
(1
.73
)
30
(1
.18
) U1 U2
P
T
36.8(1.49)
9 (
.35
5)
ø27 (1.06)
ø14(.55)
ø27 (1.06)
4 (
0.1
6)
UN
LO
CK
ING
ST
RO
KE
26o 26o
80 (3.15)
20
(0
.79
)
11
2.5
(4
.43
)1
90
(7
.48
) fo
r h
an
dle
typ
e K
L (
as
dra
wn
)
ø22
(0
.87
)
3 (
0.1
2)
35
(1
.38
)25
(0.9
85
) ø22
(0
.87
)
T Y P E K B T Y P E K C T Y P E K J
plus type K L as s hown on main drawing
HT 73 / B / 102 / 0308 / E Pag. 29
Hydraulic Pilot Control Valves
P R S V M S E R I E S T E C HNIC AL DATA
S E C T I O N A L P I L O T C O N T R O L V A L V E S T Y P E M
44.5 (1.75)
U1
U2
U3
U4
U5
U6
95
(3
.74
)
11
0 (
4.3
3)
36
.8(1
.49
)
9 (0.355)
4 (
0.1
6)
UN
LO
CK
ING
ST
RO
KE
19
4 (
7.6
4)
44.5 (1.75)
35
(1
.38
)25
(0.9
85
)
30
6.5
(1
2.0
7)
* 44.5 (1.75) * 44.5 (1.75)
119 (4.69)
131 (5.16
type K Lcontrolhandles hown
ø27 (1.06)
26o 26o
80 (3.15)
20
(0
.79
)1
12
.5 (
4.4
3)
3 (
0.1
2)
ø14
(0.55)
P
T
P
U1
T
U2
H Y D R A U L I C C I R C U I T D I A G R A M
U3 U4 U5 U6
* S pecial centre-line dis tances of 60mm and 80mmare also available.
Angled levers are available to customer's specificationsas are levers of varying heights .
F or details pleas e contact our Technical Department.
HT 73 / B / 102 / 0308 / E Pag. 31
Hydraulic Pilot Control Valves
CPVL SERIESHYDRAULIC PILOT CONTROLS
Pag. 32 HT 73 / B / 102 / 0308 / E
Hydraulic Pilot Control Valves
FEATURES:
- Aluminium body for light weight execution
- Auxiliary function integrated in a single body
- Wide range of metering curve
- Magnetic (12 or 24 VDC) or mechanical detent with prefeel ramps
- Optional linkage between main and auxiliary function
- Rubber boot protection
ATTRIBUTES:
Input pressure: Min. 25 bar – Max. 50 bar
Back pressure: 3 bar Max. at T port
Hysteresis: +/- 0,5 bar Max.
Flow: Min. 5 l/min – Max. 25 l/min
Leakage: Max. 20 cc/min @ 22 mm2/sec and 30 bar supply pressure
Fluid temperature: -20° to +80 °C
Fluids: Mineral oils HM and HV
Fluid cleanliness: 21/16/13 to ISO 4406:1999
CPVL SERIES INTRODUCTION
HT 73 / B / 102 / 0308 / E Pag. 33
Hydraulic Pilot Control Valves
C IR C UIT DIAG R AM
T
U3 U2 U4 U6 U5
P
U1
25°
69=°=
NAME PLATE
35
25°
VIEWFROM A
131
=°=
119
=°=
81 =°=
119=°=131=°=
44 =°=
9,517
2222 44
12Ø
(4 P
os.)
7( 4
Pos. )
U2U1
U3
U4U6U5
2 5°
Max.for 1 service
30° Max. for 2 services
100=°=
6117
7335
97
49
135
10Ø
21Ø
12°
98,1
370
PT
POWERDOWNFLOAT
(1)
AUXILIARY(6)
TIP(4)
CROWD(2)
RAISE(3)
AUXILIARY(5)
A
CPVL SERIES OVERALL DIMENSIONS
Pag. 34 HT 73 / B / 102 / 0308 / E
Hydraulic Pilot Control Valves
CPVL106
W = Without handleS= Straight handle (see handle catalogue)E=Ergonomic handle (see MFE catalogue)
Metering curve no on port 4(see catalogue)
Metering curve no on port 3(see catalogue)
Metering curve no on port 2(see catalogue)
Metering curve no on port 1(see catalogue)
E = Electric detent on port 4M = Mechanical detent on port 4X = No detent
E = Electric detent on port 3M = Mechanical detent on port 3X = No detent
E = Electric detent on port 2M = Mechanical detent on port 2X = No detent
E = Electric detent on port 1M = Mechanical detent on port 1X = No detent
E = Electric detent on port 5M = Mechanical detent on port 5X = No detent
Metering curve no on port 6(see catalogue)
Metering curve no on port 5(see catalogue)
Knob type on auxiliary(see knob catalogue)
B = ¼” BSP Ports (Standard option)M = Metric M14x1.5 PortsS = 7/16”-18 UNF SAE Po rts
1 = 12 VDC Magnets2 = 24 VDC Magnets
W = Without linkageL = With linkageE = Electric detent on port 6M = Mechanical detent on port 6X = No detent
E 1 2 3 4 X X X X K 5 6 XX X X X
CPVL SERIES ORDERING KEY
HT 73 / B / 102 / 0308 / E Pag. 35
Hydraulic Pilot Control Valves
PRSVB / L SERIESONE OR TWO LEVER OPERATED
PILOT CONTROL VALVES
Pag. 36 HT 73 / B / 102 / 0308 / E
Hydraulic Pilot Control Valves
P R S V B / L S E R I E S INT R ODUC T ION
P R S V B / L S E R I E S MODE L C ODING
P R S V X X X X X X X F X X X
R e t u r n s pr in g
0 = S tandard: 1.4 to 2.8 daN
1 = Light: 3.0 to 4.5 daN
2 = Medium: 7.5 to 13.8 daN
3 = Heavy: 10.0 to 19.0 daN
F = S tandard C ontrol P lunger
P R S V = Hydraulic P ilot Valve S eries
M e t e r in g c u r ve
see P C V C H A R AC T E R I S T I C S section
H a n dl e t y pe
W = W ithout Handle
K P = R ound Knob (standard)
s ee H A N D L E S section for other options
B a s ic m o de l n u m be r
Double lever S ingle lever
B O 1 L O 1
B O 2 L O 2
B O 3 L O 3
B O 4 L O 4
B O 5 L O 5
B O 6 L O 6
H Y D R A U L I C P I L O T C O N T R O L
P R S V P ilot C ontrol Valves are part of
the comprehensive range of our
Hydraulics product.
T his product, with its individual lever control,
supported by an extens ive range of control
curve characteris tics makes it suitable for a
wide range of applications .
Our engineers can offer specialis t support to
optimise this product to suit your application.
T he product is supported by a comprehensive
S ales and S ervice facility around the world.
B E N E F I T S
C ompact and light weight
All ports on bottom face for eas e of ins tallation
S imple to mount
C ompatible with a wide range of product
Operator is insulated from high temperaturecomponents
P roven, s imple pressure reducing elements
Wide range of low hys teres is , high accuracy,pressure control curves
Low effort lever control with spring centredand detented vers ions available
S h u t t le blo c k *
S 1 = To s uit s ingle lever model
S 3 = To suit double lever model
* omit if no s huttleblock is required*
see pages3 and 4
see pages5 and 6
HT 73 / B / 102 / 0308 / E Pag. 37
Hydraulic Pilot Control Valves
B O 1 P I L O T O P E R AT E D C O N T R O L
2 s ide levers with return s pring
P R S V B S E R I E S T E C HNIC AL DATA
B O 2 P I L O T O P E R AT E D C O N T R O L
2 s ide levers with mechanical detent
B O 3 P I L O T O P E R AT E D C O N T R O L
2 s ide levers with detent in any pos ition
B O 4 P I L O T O P E R AT E D C O N T R O L
2 s ide levers with detent in any pos ition + neutral pos ition s ens or
32
3 (
12
.72
)
109 (4.29)
ø12 (0.47)
61 (2.40)1
2 (
0.4
7)
90
.5 (
3.5
6)
95
(3
.74
)
41
.5
(1.6
3)
ø7 (0.275)
7 (
0.2
75
)
10
7 (
4.2
1)
34o
32
3 (
12
.72
)
109 (4.29)
ø12 (0.47)
61 (2.40)
12
(0
.47
)
90
.5 (
3.5
6)
95
(3
.74
)
41
.5
(1.6
3)
ø7 (0.275)
7 (
0.2
75
)
34o
10
0 (
3.9
4)
32
3 (
12
.72
)
109 (4.29)
ø12 (0.47)
61 (2.40)
12
(0
.47
)
90
.5 (
3.5
6)
95
(3
.74
)
41
.5
(1.6
3)
ø7 (0.275)
7 (
0.2
75
)
34o
13
1 (
5.1
6)
32
3 (
12
.72
)
109 (4.29)
ø12 (0.47)
61 (2.40)
12
(0
.47
)
90
.5 (
3.5
6)
95
(3
.74
)
41
.5
(1.6
3)
ø7 (0.275)
7 (
0.2
75
)
34o
Pag. 38 HT 73 / B / 102 / 0308 / E
Hydraulic Pilot Control Valves
B O 5 P I L O T O P E R AT E D C O N T R O L
2 s ide levers with detent in res t
P R S V B S E R I E S T E C HNIC AL DATA
T Y P I C A L R A N G E O F L E V E R M OV E M E N T
P R S V B S E R I E S T Y P IC AL T E C HNIC AL DATA
T Y P I C A L P O R T A R R A N G E M E N T
T Y P I C A L I N S T A L L AT I O N D I M E N S I O N S
T Y P I C A L H Y D R A U L I C C I R C U I T D I A G R A M
B O 6 P I L O T O P E R A T E D C O N T R O L
2 s ide levers with detent in res t and clutch in any pos ition
31
9 (
12
.56
)
112 (4.41)
ø12 (0.47)
134 (5.275)
12
(0
.47
)
90
(3
.54
)9
5 (
3.7
4)
38
(1.5
0)
ø7 (0.275)
7 (
0.2
75
)
31
9 (
12
.56
)
112 (4.41)
ø12 (0.47)
134 (5.275)
12
(0
.47
)
90
(3
.54
)9
5 (
3.7
4)
38
(1.5
0)
ø7 (0.275)
7 (
0.2
75
)
10
0 (
3.9
4)
ø10
8 M
AX
(4.2
5)
ø1
04
(4.0
9)
ø1
00
MIN
(3
.94
)
ø8
5 (3
.35
)
ø6
.5 (
0.2
56
)
45o
U1 U2 U3 U4
T
P
U1
U2
U4
U3
T
P
ø104 (4.09)
11
(0
.43
) 7 (0.275)R 3. 5
ø123 (4.84)
ø5
2 (2
.05
)
40
(1.5
75
)
171 (6.73)
ø45 (1.77)
30o 30o
UN
LO
CK
ING
ST
RO
KE
3 (
0.1
2)
BO
1,
BO
2 O
NLY
HT 73 / B / 102 / 0308 / E Pag. 39
Hydraulic Pilot Control Valves
P I L O T O P E R A T E D C O N T R O L
single s ide lever with detent in any pos ition + neutral pos ition sensor
L O 1 P I L O T O P E R AT E D C O N T R O L
s ingle s ide lever with return s pring
P R S V L S E R I E S T E C HNIC AL DATA
L O 2 P I L O T O P E R AT E D C O N T R O L
single s ide lever with mechanical detent
L O 3 P I L O T O P E R AT E D C O N T R O L
s ingle s ide lever with detent in any pos ition
L O 4 P I L O T O P E R AT E D C O N T R O L
32
3 (
12
.72
)
54.5 (2.15)
ø12 (0.47)
53 (2.09)1
2 (
0.4
7)
90
.5 (
3.5
6)
95
(3
.74
)
41
.5
(1.6
3)
ø7 (0.275)
7 (
0.2
75
)
10
7 (
4.2
1)
10
0 (
3.9
4)
13
1 (
5.1
6)
32
3 (
12
.72
)
54.5 (2.15)
ø12 (0.47)
53 (2.09)
12
(0
.47
)
90
.5 (
3.5
6)
95
(3
.74
)
41
.5
(1.6
3)
ø7 (0.275)
7 (
0.2
75
)
32
3 (
12
.72
)
54.5 (2.15)
ø12 (0.47)
53 (2.09)
12
(0
.47
)
90
.5 (
3.5
6)
95
(3
.74
)
41
.5
(1.6
3)
ø7 (0.275)
7 (
0.2
75
)
32
3 (
12
.72
)
54.5 (2.15)
ø12 (0.47)
53 (2.09)
12
(0
.47
)
90
.5 (
3.5
6)
95
(3
.74
)
41
.5
(1.6
3)
ø7 (0.275)
7 (
0.2
75
)
Pag. 40 HT 73 / B / 102 / 0308 / E
Hydraulic Pilot Control Valves
L O 5 P I L O T O P E R AT E D C O N T R O L
s ingle s ide lever with detent in res t
P R S V L S E R I E S T E C HNIC AL DATA
L O 6 P I L O T O P E R A T E D C O N T R O L
s ingle s ide lever with detent in res t and clutch in any pos ition
31
9 (
12
.56
)
67 (2.64)
ø12 (0.47)
12
(0
.47
)
90
(3
.54
)9
5 (
3.7
4)
38
(1.5
0)
ø7 (0.275)
7 (
0.2
75
)
10
0 (
3.9
4)
56 (2.20)
31
9 (
12
.56
)
67 (2.64)
ø12 (0.47)
12
(0
.47
)
90
(3
.54
)9
5 (
3.7
4)
38
(1.5
0)
ø7 (0.275)
7 (
0.2
75
)
56 (2.20)
T Y P I C A L R A N G E O F L E V E R M OV E M E N T
P R S V L S E R I E S T Y P IC AL T E C HNIC AL DATA
T Y P I C A L P O R T A R R A N G E M E N T
T Y P I C A L I N S T A L L AT I O N D I M E N S I O N S
T Y P I C A L H Y D R A U L I C C I R C U I T D I A G R A M
ø10
8 M
AX
(4.2
5)
ø1
04
(4.0
9)
ø1
00
MIN
(3
.94
)
ø8
5 (3
.35
)
ø6
.5 (
0.2
56
)
45o
U1 U2
T
P
U1
U2
T
P
ø104 (4.09)
11
(0
.43
) 7 (0.275)R 3. 5
ø123 (4.84)
ø5
2 (2
.05
)
40
(1.5
75
)
171 (6.73)
ø45 (1.77)
30o 30o
UN
LO
CK
ING
ST
RO
KE
3 (
0.1
2)
LO
1,
LO
2 O
NLY
HT 73 / B / 102 / 0308 / E Pag. 41
Hydraulic Pilot Control Valves
P R S V B /L S E R I E S S HUT T LE B LOC K T E C HNIC AL DATA
S 1 S H U T T L E B L O C K S 3 S H U T T L E B L O C K
H Y D R A U L I C C I R C U I T D I A G R A MU1 U2
U3
TP
90 (3.54)
45o
H Y D R A U L I C C I R C U I T D I A G R A M
U1 U2 TP
U1 U2
U5
TP
U1 U2 P
U3 U4
U6U3 U4T
63 (2.48)5
2 (
2.0
5)
1/4
" B
SP
(2
po
s.)
40
(1
.57
)3
4 (
1.3
4)
88
(3
.46
)
46
(1
.81
)
11
(0
.43
)
91
(3
.58
)
35 (1.38)
38 (1.50)
45o
8 (
2 p
os.
)
90 (3.54)
63 (2.48)
52
(2
.05
)
1/4
" B
SP
(2
po
s.)
40
(1
.57
)3
4 (
1.3
4)
88
(3
.46
)
46
(1
.81
)
11
(0
.43
)
91
(3
.58
)
35 (1.38)
8 (
2 p
os.
)
U1
U2
T
P U3
U4
U3
T
P U6
U1
U2
U5
HT 73 / B / 102 / 0308 / E Pag. 43
Hydraulic Pilot Control Valves
HPV SERIESHYDRAULIC PILOT CONTROLS
Pag. 44 HT 73 / B / 102 / 0308 / E
Hydraulic Pilot Control Valves
HPV SERIES INTRODUCTION
HYDRAULIC PILOT CONTROL
HP V P ilot C ontrol Valves are part of
the comprehensive range of our
Hydraulics product.
T he product, with its s ingle lever dual axis
control, and supported by an extens ive range
of control curve characteristics and handle
options , makes it suitable for a wide range of
both mobile and industrial applications .
Our engineers can offer specialis t support to
optimise this product to suit your application.
T he product is supported by a comprehensive
S ales and S ervice facility around the world.
BENEFITS
Compact and light weight
All ports on bottom face for ease of installation
Suitable for arm rest of console mounting
Compatible with a wide range of product
S tylish good looks suit able for modern cabs
Operator is insulated from high temperaturecomponents
Proven, simple pressure reducing elements
Wide range of low hysteresis, high accuracy ,pressure control curves
Wide range of electrical options in both standardand multi-functional ergonomic handles
Low effort lever control
HPV SERIES MODEL CODING
HPV 1 CO1 X XXX X XR eturn spring
0 = S tandard: 1.4 to 2.8 daN
1 = Light: 3.0 to 4.5 daN
2 = Medium: 7.5 to 13.8 daN
Gaiter
R = Round
S = Square
HPV = Hydraulic Pilot Control
Example : ordering number : HPV 1 C01 W 015 S 1model number : HPV 1 C01 W 015 S 1 / 123456
(assigned number)
1 = Design Mark
Metering curve
see PCV CHARACTERISTICS section
Handle type
W = Without Handle
see HANDLES section
Basic model type
CO1 see page 3
HT 73 / B / 102 / 0308 / E Pag. 45
Hydraulic Pilot Control Valves
H P V S E R I E S T E C HNIC AL DATA
CO1 w it h S Q U A R E g a it e r CO1 w it h R O U N D g a it e r
T Y P I C A LC I R C U I T D I A G R A M
T Y P I C A LF U N C T I O N A L D I A G R A M(V I E W F R O M 'B ' )
2/1 2/1
2/1 2/1
1
3
2 4
U1 U2 U3 U4
T
P
V I E WF R O M 'A '
ø1
00
(3.9
4)
ø5
2 (
2.0
5)
37(1.46)
ø125 (4.92)
102 (4.02)
U1
U2 U3
U4
T
P
'A '
'B '
30
6 (
12
.05
)
75
(2
.95
)2
31
(9
.09
)
29
.5 (
1.1
6)
ø39.5 (1.56)
Max for 1 s ervice21o
Ma x for 2 s ervices27o
M O U N T I N GD E T A I L S
ø1
00
(3.9
4)
ø8
5 (2
.95
)
ø6
.5 (
0.2
55
)
45o
'A '
'B '
30
6 (
12
.05
)
75
(2
.95
)2
31
(9
.09
)
29
.5 (
1.1
6)
ø39.5 (1.56)
Max for 1 s ervice21o
Ma x for 2 s ervices27o
V I E WF R O M 'A '
ø5
2 (2
.05
)
37 (1.46)
ø131 (5.16)
U1
U2 U3
U4T
P
M O U N T I N GD E T A I L S
ø1
00
MIN
(3
.94
)
ø8
5 (2
.95
)
ø6
.5 (
0.2
55
)
45o
ø10
8 M
AX
(4.2
5)
ø1
04
(4.0
9)
HT 73 / B / 102 / 0308 / E Pag. 47
Hydraulic Pilot Control Valves
PRSVP SERIESFOOT PEDALS
Pag. 48 HT 73 / B / 102 / 0308 / E
Hydraulic Pilot Control Valves
P R S V P S E R I E S INT R ODUC T ION
P R S V P S E R I E S MODE L C ODING
P R S V P X X X X X X X X X R e t u r n s pr in g
1 = Light: 3.0 to 4.5 daN
2 = Medium: 7.5 to 13.8 daN
3 = Heavy: 10.0 to 19.0 daN
P R S V P = Hydraulic P ilot Valve S eries P
M e t e r in g c u r v e
see P C V C H A R A C T E R I S T I C S section
B a s ic m o de l n u m be r
O 1 = R ocker pedal with 2 pilot s pools
0 2 = Twin pedal with 2 pilot s pools
0 3 = S ingle pedal with 1 pilot s pool
H Y D R A U L I C P I L O T C O N T R O L
P R S V P ilot C ontrol Valves are part of
the comprehensive range of our
Hydraulics product.
T his product, with its range of foot pedal
controls , supported by an extens ive range
of control curve characteris tics and a choice
of handle options , makes it suitable for a wide
range of applications .
Our engineers can offer specialis t support to
optimise this product to suit your application.
T he product is supported by a comprehensive
S ales and S ervice facility around the world.
B E N E F I T S
C ompact and light weight
P orts ideally pos itioned for eas e of ins tallation
S imple to mount
C ompatible with a wide range of product
Operator is insulated from high temperaturecomponents
P roven, s imple pressure reducing elements
Wide range of low hys teres is , high accuracy,pressure control curves
R ange of operator pedal efforts available
R ubber boot protection to prevent ingress ofairborne contaminant
R ubber boot suitable for a wide range ofenvironmental conditions
P lunger manufactured from non-corrosive steel
E nd of s troke limited externally to prevent anydamage to internal components
Double lip seal option available for increasedproduct life
Optimised angular movement of foot pedal
P lu n ge r S e a l a n dR u bbe r B o o t O pt io n s see page 47
S W = s tandard s eal without rubber boot
S G = s tandard s eal with type G rubber boot(option not available for P R S VP 03)
S K = s tandard s eal with type K rubber boot(option not available for P R S VP 01)
L W = double lip longlife s eal without rubber boot
L K = double lip longlife s eal with rubber boot type K(option not available for P R S VP 01)
P e da l T y pe
W = W ithout pedal
S = F lat s tandard pedal
V = V s haped pedal (available only for P R S V P 01)
HT 73 / B / 102 / 0308 / E Pag. 49
Hydraulic Pilot Control Valves
P R S V P S E R I E S T E C HNIC AL DATA
9(0.35) 18 (0.71)
80(3.15)
160(6.30)
180(7.09)
20
(0.7
9)
40
(1.5
75
)
U2U1
P
TU2
U1P
T
130(5.12)
55(2.17)
82(3.23)
260(10.24)
70(2.76)
270
20
0(7
.87
5)
10
(0.3
9)
15
7.5
(6.2
0)
8
(.3
15
)
31
(1.2
2)
10
4.5
(4.1
15
)
66
(2.6
0)
70
(2.7
6)
U2U1P
T
44
.5(1
.75
) ø1
2(0
.47
)
60(2.36)
52.5(2.07)
39.5(1.56)
9(0.35) 18 (0.71)
80(3.15)
160(6.30)
180(7.09)
20
(0.7
9)
40
(1.5
75
)
55(2.17)
130(5.12)
8
(.3
15
)
31
(1.2
2)
10
4.5
(4.1
15
)
20
(0.7
9)
82(3.23)
282(11.10)
66
(2.6
0)
70
(2.7
6)
9(0.35) 18 (0.71)
80(3.15)
160(6.30)
20
(0.7
9)
40
(1.5
75
)
21
.55
(0.8
5)
8
(0.3
15
)
10
4.5
(4.1
15
)
55(2.17)
9
.5(0
.37
5)
31
(1.2
2)
55
(2.1
7)
80(3.15)
160(6.30)
24
(0.9
5)
T y pic a l H y dr a u l ic C i r c u it D ia gr a mfor all foot pedals illus trated on this page
T y pic a l T e c hnic a l D a t afor all foot pedals illus trated on this page
S ervice ports : P, T, U1, U2; 1/4" B S P
Maximum inlet pres s ure * : P ort P - 50 bar
Maximum back pres s ure : P ort T - 3 bar
S upply flow range : from 5 up to 20 litres /minute
Maximum Hys teres is : +/- 0.5 bar
Fluid : Mineral Oils IS O, HM and HV
C ontamination clas s : 16/11 IS O 4406
F luid temperature range : from -20 up to +80oC
* Higher inlet pres s ures may be pos s ible.Als o s ide porting is available.F or both requirements , pleas e cons ult yourHansa-Tmp s.r.l. repres entative.
U1 U2P T
f la t s t a n da r d r o c k e r pe da l V s h a pe d r o c k e r pe da l
P R S V P 0 1 W r o c k e r m o de l w it h o u t pe da l
P R S V P 0 1 S P R S V P 0 1 V
Pag. 50 HT 73 / B / 102 / 0308 / E
Hydraulic Pilot Control ValvesP R S V P S E R I E S T E C HNIC AL DATA
60(2.36)
222(8.74)
12
0(4
.73
)
16
0(6
.30
)
63
(2.4
8)
17
4(6
.85
) 79
(3.1
1)
47
(1.8
5)
ø1
23
(4.8
4)
ø1
04
(4.0
9)
ø8
5(3
.35
)
ø5
2(2
.05
)1
1(0
.43
)
7(0.28)
U2
U1
P T
57(2.24)
25
(0.9
85
)
48
(1.8
9)
U
P
T
7o14'
30(1.18)
183(7.20)
45
(1.7
7)
60
(2.3
6)
46
(1.8
1)
60(2.36)
3o2
0(0
.79
)1
12
.5(4
.43
)
15
4(6
.06
)
ø10(0.39) (4 positions)
45
.5
(1.7
9)
25
(0.9
85
)
U1 U2P T
H y dr a u l ic C i r c u it D ia gr a m H y dr a u l ic C i r c u it D ia gr a m
U P T
T e c hnic a l D a t a
S ervice ports : P, T, U1, U2; 1/4" B S P
Maximum inlet pres s ure * : P ort P - 50 bar
Maximum back pres s ure : P ort T - 3 bar
S upply flow range : from 5 up to 20 litres /minute
Maximum Hys teres is : +/- 0.5 bar
Fluid : Mineral Oils IS O, HM and HV
C ontamination clas s : 16/11 IS O 4406
F luid temperature range : from -20 up to +80oC
T e c hnic a l D a t a
S ervice ports : P, T, U; 1/4" B S P
Maximum inlet pres s ure * : P ort P - 50 bar
Maximum back pres s ure : P ort T - 3 bar
S upply flow range : from 5 up to 20 litres /minute
Maximum Hys teres is : +/- 0.5 bar
Fluid : Mineral Oils IS O, HM and HV
C ontamination clas s : 16/11 IS O 4406
F luid temperature range : from -20 up to +80oC
T w in pe da lP R S V P 0 2 S o n e pi lo t s po o l w it h pe da lP R S V P 0 3 S
* Higher inlet pres s ures may be pos s ible, pleas e cons ult our T echnical Department.
HT 73 / B / 102 / 0308 / E Pag. 51
Hydraulic Pilot Control Valves
L K S e a l t y pe L / B o o t t y pe KL W S e a l ty pe L / N O B o o t ( W )
S K S e a l t y pe S / B o o t t y pe KS G S e a l t y pe S / B o o t t y pe G
P R S V P S E R I E S P LUNG E R AND B OOT T Y P E S
S W S e a l ty pe S / N O B o o t ( W )
HT 73 / B / 102 / 0308 / E Pag. 53
Hydraulic Pilot Control Valves
SUH SERIESPILOT SUPPLY UNITS
Pag. 54 HT 73 / B / 102 / 0308 / E
Hydraulic Pilot Control Valves
S U H S E R I E S INT R ODUC T ION
P I L O T S U P P L Y U N I T S
T he S UH is a direct acting pressure
reducing valve which can be connected
to either one or two main circuits via
ports P 1 and P 2. B oth ports feed
through a shuttle valve to prevent circuit
interaction. R educed pressure is
supplied to port P 1 and P 2.
A pre-set relief valve is fitted to prevent
over pressure, and the unit is supplied
with an accumulator connection for
emergency power supply. An solenoid
attachment is available to act as a safety
system and to maintain the accumulator
charge for a longer period by preventing
leakage downstream from the ‘U’ ports .
Also a vers ion is available with integral
filter to protect the output line and hence
downstream components .
B E N E F I T S
C ompact unitOptional accumulator for peak and emergency powerOptional 2 way & 3 way, 12 or 24 V DC s olenoid valvesfor s afety and extended accumulator s torage timeDual ports for maximum ins tallation flexibility
T E C H N I C A L F E AT U R E S
Input pressure P : Min 8 bar, Max 350 barOutput pressure (nominal) : 30 barMax pres s ure on drain port T : 3 barR elief valve setting (nominal) : 45 barMax accumulator pressure : 210 bar (Nitrogen pre-charge 13 bar)F low capacity at ports S : 5 l/min without accumulator
: up to 40 l/min with accumulator
Hydraulic fluids : IS O HM & HV bio-degradeable fluidsF luid temperature range : -20 to +80oCF luid vis cos ity : 2.8 to 380 mm2/s ec
Maximum filter rating : 25μm (absolute)
S U H S E R I E S MODE L C ODING
S U H X X X - X X X X X X X
Des cription W eight (kg)
B AS IC S UH VALVE 2.36
0.35 LITR E AC C UMULATOR 3.00
0.75 LITR E AC C UMULATOR 4.00
1.50 LITR E AC C UMULATOR 6.20
2 W AY S E LE C TOR 0.50
3 W AY S E LE C TOR 0.70
A c c u m u la t o r s iz e s
0 0 0 = No accumulator
0 3 5 = 0.35 litre accumulator
0 7 5 = 0.75 litre accumulator
1 5 0 = 1.50 litre accumulator
A c c u m u la t o r o pt io n s
L = with accumulator
W = without accumulator
P = with provis ion for accumulator
C o n t r o l o pt io n s
A 0 0 = standard valve
A 2 2 = with 2 way s elector 12 V DC s olenoid
A 2 4 = with 2 way s elector 24 V DC s olenoid
A 3 2 = with 3 way s elector 12 V DC s olenoid
A 3 4 = with 3 way s elector 24 V DC s olenoid
P r e s s u r e s e t t in g
0 2 5 = 25 bar
0 3 0 = 30 bar
0 3 5 = 35 bar
S U H = S upply unit - hydraulic
E xample:S tandard valve s et at 30 bar, with 12 Volts olenoid valve and 0.35 litre accumulatorordering number:S UH 030 A 22 L 035model number:S UH 030 A 22 L 035 / 123456
(as s igned number)
0 4 0 = 40 bar
0 5 0 = 50 bar
HT 73 / B / 102 / 0308 / E Pag. 55
Hydraulic Pilot Control Valves
S U H S E R I E S T E C HNIC AL DATA
70(2.76)
53
.5(2
.11
)
38
.5(1
.52
)
90(3.54)
134.8(5.31)
17
(.6
7)
37
(1.4
6)
14
(.5
5)
25.5(1)
M8X1.25
35(1.38)
U1
P1
T1
19
(.7
5)
51
(2.0
1)
82
(3.2
3)
64.5(2.54)
P2
U2 T2
10(.39)
53
(2.0
9)
P1
U1 T1
P2 U2T2
P1 U1T1
2 5BAR
4 5BAR
C I R C U I T D I A G R A M
P2 U2T2
P1 U1T1
2 5BAR
4 5BAR
C I R C U I T D I A G R A M
53
.5(2
.11
)
38
.5(1
.52
)
P2
U2 T2
P1
U1 T1
70(2.76)
90(3.54)
134.8(5.31)
17
(.6
7)
37
(1.4
6)
14
(.5
5)
25.5(1)
M8X1.25
35(1.38)
U1
P1
T1
19
(.7
5)
51
(2.0
1)
82
(3.2
3)
64.5(2.54)
10(.39)
53
(2.0
9)
64
(2.5
2)
S U H -x x x -A 0 0 -W -0 0 0 s tandard valve with no ac c umulator and no provis ion for an ac c umulator
S U H -x x x -A 0 0 -P -0 0 0 s tandard valve with no ac c umulator and with provis ion for an ac c umulator
Pag. 56 HT 73 / B / 102 / 0308 / E
Hydraulic Pilot Control Valves
S U H S E R I E S T E C HNIC AL DATA
P2 U2T2
P1 U1T1
T Y P I C A L C I R C U I T D I A G R A M
P2 U2T2
P1 U1T1
S U H -x x x -A 0 0 -L -x x x s tandard valve with ac c umulator / with no s olenoid
A
B
C
15 (0.59)
AAccumulator
Length
162 (6.38)
200 (7.87)
295 (11.61)
BOverall Unit
Length
302 (11.89)
340 (13.39)
435 (17.13)
CMaximumDiameter
99 (3.90)
115 (4.53)
115 (4.53)
AccumulatorC apacity
0.35 litres
0.75 litres
1.50 litres
S UH-xxx-A00-L -035
S UH-xxx-A00-L -075
S UH-xxx-A00-L -150
S T A N DA R D V A L V EF or dimens ions s ee page 3
S U H -x x x -A 2 2 -L -x x x
valve with ac c umulator and 12V DC 2-way s olenoid
C I R C U I T D I A G R A M
F or dimens ions includingaccumulators s ee above
S T A N DA R DV A L V EF or dimens ionss ee page 3
11 (0.43)
48.5 (1.91)
115 (4.53)
S U H -x x x -A 2 4 -L -x x x
valve with ac c umulator and 24V DC 3-way s olenoid
F or dimens ions includingaccumulators s ee above
10
4 (
4.0
9)
16
4 (
6.4
6)
37
(1
.46
)
P2
U
P1 TT1
C I R C U I T D I A G R A M
S T A N DA R DV A L V EF or dimens ionss ee page 3
11
4 (
4.4
9)
17
4 (
6.8
5)
5 (0.20)
60 (2.36)
120 (4.72)
60
(2
.36
)
P1T1
T2P2
U1
U2
P1
U1
T1
P1T1
P2
T
U
P1
U
T1
T
HT 73 / B / 102 / 0308 / E Pag. 57
Hydraulic Pilot Control Valves
S U H S E R I E S F ILT E R T E C HNIC AL DATA
S U H w it h in le t l in e f i l t e r
70 (2.76)10 (0.39)
2 mounting holesM8 x 1.25 x 14.0 deep
135 (5.31)
60 (2.36)
38.5 (1.52)5.6 (0.22)
25.5
(1.00)64.5 (2.54)
100 (3.94)
19
(0
.75
)
13
5 (
5.3
1)
12
4 (
4.8
8)
12
2 (
4.8
0)
33
(1
.30
)5
8 (
2.2
8)
10
8 (
4.2
5)
98.8 (3.89)
33 (1.30)
R emoval
48 (1.89) 38.5 (1.52)
7.5 (0.30)
15
3 (
6.0
2)
F ilter Unit
C I R C U I T D I A G R A M
P UT
3 0BAR
4 5BAR
25μm F IL T E R
T his vers ion of the S UH has an integral
filter fitted to the inlet line of the valve to
provide complete protection to both the
pilot supply unit and any downstream
services from contamination. T he filter
element is rated at 25μm absolute and
is replaceable.
To model code this unit, add the code /F
onto the end of the standard model code
as shown on page 50.
P
U T
HT 73 / B / 102 / 0308 / E Pag. 59
Hydraulic Pilot Control Valves
PILOT CONTROL VALVESCHARACTERISTICS
Pag. 60 HT 73 / B / 102 / 0308 / E
Hydraulic Pilot Control Valves
PCV CHARACTERISTICS INTRODUCTION
METERED CURVES
T hese characteris tics are compatible
with HPV , HPVL , SPVL , and the entire
PRSV range of product. F or optimum
control it is important to select the correct
characteris tic to suit the application and
our T echnical Department are
always pleased to ass is t in this process .
T here is a comprehensive worldwide S ales
and S ervice facility around the world.
BENEFITS
High precision components
Low hysteresis
Excellent repeatability
Wide range of options
Suitable for a wide range of product
Virtually no service work required
Can be engineered to suit your particular application
HT 73 / B / 102 / 0308 / E Pag. 61
Hydraulic Pilot Control Valves
P I L O T C O N T R O L V A L V E ME TE R ING C UR VE S
L I N E A R C H A R A C T E R I S T I C S W I T H O U T S T E P
pre s s ure
plu n g e r s t r o k e
A
B
C D
Output P lunger MeteringP res s ure (bar) S troke (mm) C urve Number
A B C D
0.0 40.4 0.9 9.5 061
0.0 68.6 2.0 9.5 022
0.0 123.2 2.0 9.5 033
0.5 13.0 1.8 9.5 087
0.7 31.8 1.0 9.5 071
1.4 12.1 1.0 9.5 072
1.5 9.5 1.0 9.5 086
1.5 41.9 0.9 9.5 093
2.0 8.4 2.0 9.5 004
2.0 15.8 0.9 9.5 060
2.0 55.7 1.0 9.5 092
3.0 24.2 0.9 9.5 058
3.2 19.0 1.0 9.5 053
3.2 20.9 0.0 9.5 096
3.8 24.9 0.9 9.5 074
4.0 10.4 2.0 9.5 005
4.7 27.6 0.8 9.5 132
5.0 18.9 2.0 9.5 079
5.0 20.8 0.9 9.5 094
5.0 20.9 1.0 9.5 089
5.5 26.7 0.9 9.5 075
5.8 24.2 1.6 9.5 035
5.8 24.1 0.9 9.5 036
5.8 24.2 1.8 9.5 037
5.8 30.0 0.8 9.5 133
Output P lunger MeteringP res s ure (bar) S troke (mm) C urve Number
A B C D
6.0 31.7 2.0 9.5 001
6.0 41.1 1.0 9.5 040
6.0 42.1 0.9 9.5 046
8.0 15.5 2.0 9.5 056
8.1 21.1 3.3 9.5 105
8.6 26.9 0.9 9.5 039
9.1 27.9 0.9 9.5 003
Pag. 62 HT 73 / B / 102 / 0308 / E
Hydraulic Pilot Control Valves
PRESSURE( BAR )
STROKE( mm )
ID NUMBER
A B C D
6 22,5 2 6,5 CR002
6 25 2 7,2 CR006
6 21,7 2 6,3 CR007
6 16,3 1,6 7,1 CR008
0,5 4 1,8 8,4 CR009
0,5 6,5 2 8,5 CR010
1 8 1 8,5 CR011
2 11,5 1 8,5 CR012
8,2 24,4 1,8 8,5 CR013
8,2 24,5 1 8,5 CR014
5,8 22 1,8 8,5 CR015
5,8 19 1,8 7,3 CR016
5,8 19 0,9 6,4 CR017
4,9 18,9 1 8,5 CR018
5 14,5 1 8,5 CR019
6,5 14 1 8,5 CR020
3 9 2 8,5 CR021
5 12 1 8,5 CR023
8 24,2 0,9 8,5 CR024
2 11,5 2 8,5 CR025
5,03 15,93 1 8,5 CR026
0 13 0,5 8,5 CR027
5,5 24,2 0,9 8,5 CR028
5,8 19 1,6 7,1 CR029
3,4 29,4 1 8,5 CR030
14 29 1 8,5 CR031
9,8 26 1,8 8,5 CR032
1 12,0 1 8,5 CR034
5 21 1,2 6,5 CR038
3,25 15,4 1 8,5 CR041
2 8 0,5 6,5 CR042
6,6 20,7 1 8,5 CR043
8 20,7 1,8 8,5 CR044
2 13 1 8,5 CR045
0,5 11,4 1,8 8,5 CR047
3,2 11,7 1,8 8,5 CR048
4,3 15,2 1 8,5 CR049
PILO T CONTROL VALVE METERING CUR VES
LINEAR CHARACTERISTICS WITH STEP
pressure
plunger stroke
A
B
C DSORTED BY ID NUMBER
HT 73 / B / 102 / 0308 / E Pag. 63
Hydraulic Pilot Control Valves
PRESSURE( BAR )
STROKE( mm )
ID NUMBER
A B C D
6 17,4 1 7,1 CR050
3 10 1 8,5 CR051
3,2 17,2 1 8,5 CR062
6.5 28 1 8,5 CR063
5,9 12,9 1 8,5 CR065
1,5 8,5 1 8,5 CR069
3 10 1 8,5 CR070
8,4 50 1 8,5 CR073
0,5 18,4 1 8,5 CR076
2 20,5 0,9 8,5 CR077
2.4 16.4 1 8,5 CR078
2 27,5 1 8,5 CR080
7 21 1.5 7.1 CR081
5,8 22,4 0,9 8,5 CR082
9 15,5 2 8,5 CR084
5,8 22 0,9 8,5 CR088
4 21,5 0,9 8,5 CR090
4,5 18 0,9 8,5 CR095
0,8 29 1,4 3,5 CR097
8,4 21,1 3,25 8,5 CR098
5 21,5 1,8 7,3 CR099
7,2 15,3 1 8,9 CR100
3,5 13 1 8,5 CR101
3,73 29,23 1 8,5 CR104
5,8 19,8 1 8,5 CR106
4,44 17 1,8 8,5 CR107
4,5 27 1 8,5 CR108
5 24.5 1.8 8.5 CR109
5,15 19,1 1,2 8,5 CR112
5,8 26 1 8,5 CR115
5 23 1 8,5 CR116
4,9 17,5 1 8 CR117
8,4 27,9 1,8 8,5 CR120
3,04 21,74 0,9 8,5 CR121
4,3 13,8 1 8,5 CR122
2,76 14,91 1 8,5 CR123
3 8 1 8,5 CR125
6,7 16,2 1 8,5 CR127
2,8 4,75 1 8,25 CR129
7 26,7 0,5 8,5 CR135
7,57 24,63 0,5 8,5 CR136
5,69 17,84 1 8,5 CR137
4,44 30,44 1 8,5 CR138
5,5 25 1 8,9 CR139
6 28,7 1 8,5 CR150
PILO T CONTROL VALVE METERING CUR VES
LINEAR CHARACTERISTICS WITH STEP....continued
Pag. 64 HT 73 / B / 102 / 0308 / E
Hydraulic Pilot Control Valves
SORTED BY ID NUMBER
PRESSURE( BAR )
STROKE( mm )
ID NUMBER
A B C D E F
8 16.3 30 1.4 6 9 CR119
1,5 8 17,3 2 7 9 CR124
0 20 90 0,8 6 9,3 CR130
2 8 28 1 5 9 CR194
5.5 20 33 0.8 6.5 9 CR141
7 20 32.5 0.8 6.5 9 CR142
PILO T CONTROL VALVE METERING CURVES
BROKEN CHARACTERISTICS WITHOUT STEP
pressure
plunger stroke
A
C
D FE
B
HT 73 / B / 102 / 0308 / E Pag. 65
Hydraulic Pilot Control Valves
SORTED BY ID NUMBER
PRESSURE( BAR )
STROKE( mm )
ID NUMBER
A B C D E F
0,2 2,8 8,4 0,5 5,7 8,4 CR102
1,5 8 15 2 7 8,5 CR103
1,15 4 11 0,6 5,4 8,4 CR111
1 4,5 9 1 7,5 8,5 CR114
1 8,3 14 1,1 7 8,4 CR118
7,5 15 28 1,8 6 8,5 CR134
8,5 12,5 32 1 3 8,5 CR144
7,5 15 32 1 6 8,5 CR151
5 9,5 21,5 1,3 5 8,6 CR154
6 15 28 1 6 8,5 CR156
2 5 8 1 7 8,5 CR164
2 7 20 1 5 8,5 CR174
7,5 15 20,7 1,2 5,4 6,5 CR184
7,5 12 24,2 1 5,2 8,5 CR161
PILO T CONTROL VALVE METERING CURVES
BROKEN CHARACTERISTICS WITH STEP
pressure
plunger stroke
A
C
D F
B
E
HT 73 / B / 102 / 0308 / E Pag. 67
Hydraulic Pilot Control Valves
OIL SAMPLING VALVES
Pag. 68 HT 73 / B / 102 / 0308 / E
Hydraulic Pilot Control Valves
O I L S A M P L I N G V A L V E S INT R ODUC T ION
T he Oil Sampling Valve provides
a permanently fitted, cost effective solution for collecting oil samples
from a pressurised hydraulic system while
that system is running under normal conditions ,
which is a recognised method of collecting
a representative sample of oil reflecting the
true condition of oil within the system.
It is also important that the oil is not
contaminated either during collection or until
it reaches the laboratory. B y us ing the correct
valve model to suit the system pressure to
which it will be fitted this contamination free
collection can be achieved.
O P E R AT I O N
T he oil sampling valve includes an as s embly of a number of grooved dis cs which form an orifice of known length.
B y varying the number of dis cs this orifice length can be controlled s uch that it can be made s uitable for different s ys tem pres s ures and allow s amples to be taken for s ys tems of different pres s ure without the danger created by oil jetting at high velocity .
As there are no moving parts , and the oil velocity is low,there is no tendency to create contamination within theunit. All parts are non-magnetic. T he unit is s uitable fors ampling oil from s ys tems with pres s ures of up to 420bar and is s uitable for any type of fluid.
T he appropriate model mus t be s pecified for the s ys tempres s ure. S ample bottles , with a graduated s cale up to250 ml to IS O-4796, are als o available.
O I L S A M P L I N G V A L V E S INS TALLATION
HT 73 / B / 102 / 0308 / E Pag. 69
Hydraulic Pilot Control Valves
O I L S A M P L I N G V A L V E S T E C HNIC AL DATAL
(se
e ta
ble
)
3/8" B S P
10
(0.3
9)
M O DE L PA R T S Y S T E M DI M E N S I O N W E I G H TN U MB E R N U MB E R P R E S S U R E L (gr )
(ba r ) m m ( inc he s )
201A-1-1 B 9396010003 20 98.5 (3.88) 469
201A-1-2 B 9396010013 50 97.5 (3.84) 471
201A-1-4 B 9396010023 100 99.0 (3.90) 474
201A-1-6 B 9396010033 140 100.5 (3.96) 478
201A-1-8 B 9396010043 180 102.0 (4.02) 481
201A-1-10 B 9396010053 220 103.5 (4.07) 485
201A-1-12 B 9396010063 250 105.0 (4.13) 520
201A-1-14 B 9396010073 300 106.5 (4.19) 523
201A-1-16 B 9396010083 350 108.0 (4.25) 527
201A-1-18 B 9396010093 400 109.5 (4.31) 530
201A-1-20 B 9396010103 450 111.0 (4.37) 533
Note: T he chart s hows model numbers des igned to be us ed with mineral oilsand emuls ion. Models are available to be us ed with V IT ON ® seals andphos phate es ter fluids ; for details pleas e contact our T ech. Dpt.T ighten this
nut to 34 Nm
80
60
40
20
80
70
60
50
40
30
20
10
VIS
CO
SIT
Y (c
St)
AT
AT
MO
SP
HE
RIC
PR
ES
SU
RE
0 70 140 210 280 350 420
160
140
120
100
0 70 140 210 280 350 420
P R IMAR Y P R E S S UR E (bar) P R IMAR Y P R E S S UR E (bar)
L E NG T H 1 VALVE L E NG T H 2 VALVE
• S ampling flow: 100cc/min with fluid at 30 cS t• Maximum temperature: 100oC
1 D
ISC
2 D
ISC
S
4 D
ISC
S
6 DIS
CS
8 DIS
CS
10 DIS
CS
12 DIS
CS
14 DIS
CS
16 DIS CS
18 DIS CS
20 DIS CS
Via M.L. King, 6 - 41122 MODENA (ITALY)
Tel: +39 059 415 711
Fax: +39 059 415 729 / 059 415 730
INTERNET: http://www.hansatmp.it
E-MAIL: [email protected]
HYDRAULIC COMPONENTS
HYDROSTATIC TRANSMISSIONS
GEARBOXES - ACCESSORIES
As HANSA-TMP has a very extensive range of products and some products have avariety of applications, the information supplied may often only apply to specificsituations.
If the catalogue does not supply all the information required, please contactHANSA-TMP.
In order to provide a comprehensive reply to queries we may require specific dataregarding the proposed application.
Whilst every reasonable endeavour has been made to ensure accuracy, this publicationcannot be considered to represent part of any contract, whether expressed or implied.
HANSA-TMP reserves the right to amend specifications at their discretion.