Heavy Duty Feeders
OwnerSello
Look to FMC Technologies for exceptional value and performance in bulk material handling. For nearly70 years, weve partnered with our customers to solve material handling requirements in the mostdemanding and diverse industries and applications. Proven, low-maintenance and built to last, ourSyntron linebacked by our expert team of engineers and application specialistssets the standardfor quality, performance and reliability.
FMC Technologies is committed to complete customer satisfaction, with fast, efficient solutions formost bulk handling applications. From state-of-the-art electronic data capabilities, to expert sales andengineering support specialists, were focused on ensuring a smooth design, production and installationprocessfrom start to finish. Once youre up and running, our customer service and field service teamsare on call 24/7 with technical assistance and service.
The first name in vibration technology. Rugged and built tolast, Syntron bulk material handling equipment has a proventrack record for reliable, low-maintenance performance for awide range of industries and applications.Heavy-Duty Feeders
Syntron heavy-dutyfeeders
table of contents
2
Syntron electromagneticfeeders 4
Syntron electromechanicalfeeders 16
Syntron RF electromechanicalfeeders 18
Syntron MF electromechanicalfeeders 20
Syntron SG-H mechanicalfeeders 28
Recommended installationguidelines 30
Increase bulk handling productivity with controlledhigh feed rates that improve cost-per-ton handlingefficiency.
Heavy-Duty Feeders
3www.fmctechnologies.com/materialhandling
Material Handling Solutions
Syntron Heavy-Duty Vibrating Feeders
Syntron Vibrating Feeders for heavy industry are ideal for feeding awide variety of bulk materials from storage piles, hoppers, bins and silos.Rugged and dependable, Syntron heavy-duty feeders are backed by yearsof service-proven performance in the mining, aggregates, glass, cement,chemical, wood products and steel industries.
Syntron Vibrating Feeders are designed to increase bulk handlingproductivity with high, controlled feed rates to improve cost-per-tonefficiency. Electromagnetic and electromechanical models are available.With capacity ranges from 25 to 4,000 tons per hour, these feeders areideally suited for high-tonnage feeding. Feeder selection should includeconsideration of production requirements, material characteristics, andoperating environment.
Syntron Vibrating Feeders are sub-resonant tuned, two-mass, spring-connected systems. These features enable Syntron feeders to workconsistently under material damping and other varying headload conditionswith negligible changes in trough stroke. Sub-resonant tuning maintainsstroke consistency and speed stability, thus delivering higher capacitiesat controlled feed rates.
Precise, sub-resonant tuning is a key characteristic of both types ofSyntron vibrating feeders. Electromagnetic models are tuned throughcareful calculation of the number and thickness of the special leaf springsrequired to accomplish the desired tuning ratio. Electromechanical modelsare tuned by adjusting the operating speed to obtain the exact tuningratio. Because sub-resonant tuning is so critical to feeder performance, adetailed explanation is provided for electromagnetic feeders on page 6and for electromechanical feeders on page 17.
Dependable, flexible control sets Syntron vibrating feeders apart fromother feeding and conveying machinery. Material feed rates are controlledand easily adjusted with Syntron solid-state controls; a wide range ofstandard and special models is available. Control devices can also besupplied for integration into systems that use external signals fromautomatic sensing devices. In addition, control arrangements are availablefor selecting and sequencing a group of feeders.
Electromagnetic Feeder
Electromechanical Feeders
Syntron MF ElectromechanicalFeeder
Syntron F-SeriesElectromagnetic Feeder
Syntron RF ElectromechanicalFeeder
4Syntron Heavy-Duty Electromagnetic FeedersBulk material feeding with full-range control.
Syntron Heavy-Duty Electro-magnetic Feeders come in tendifferent models with capacitiesranging from 25 to 1600 tons perhour.* These versatile feeders arecapable of handling a variety ofmaterials from the finest powdersto large, coarse particles.
Syntron Electromagnetic Feederscan be supplied in various configu-rations including multiple- driveunits and above-deck drive units.Above-deck drive units are recom-mended where there is insufficientspace below the trough.
Syntron Electromagnetic Feedersrequire minimal maintenance asthere are no mechanical parts to wearout, such as cams, eccentrics, beltsand bearings thus eliminatingthe need for lubrication. All move-ment is confined to the heavy-dutyleaf springs. Electrical components,such as the coil, will provide yearsof service under normal operatingconditions. Dust-tight drive unitsare standard on all models.
Dependable, flexible controls provideeasily adjustable feed rates withinstantaneous response. A varietyof controls with special controlarrangements are available.(For more information onelectromagnetic feeder controls,see pages 14 and 15.)
Electromagnetic Feeder Features
Dust-tight and maintenance-free drive units
Above- or below-deck drive units
Two-mass, spring-connected, sub-resonant tuned
High frequency - 3600 VPM at 60Hz
Stroke - 0.060 inches
Stroke generated by creating a magnetic field
Suspension mount, base mount or combination of both
Bolt-in replacement trough liners
Multiple-drive unit feeders available
Syntron F-450 Electromagnetic Feeders feed sand in a glass factory.
Syntron electromagnetic feeders
* Based on dry sand weighing 100 pounds per cubic foot. Capacities vary depending on drive unit location, material characteristics, materialdensity, trough length and width, trough liner type, feeder installation, skirt boards and hopper transitions.
5www.fmctechnologies.com/materialhandling
Material Handling Solutions
Syntron ElectromagneticFeeders are normally installedby suspension mounting withfour flexible wire rope cables.They can also be supplied forbase mounting on a solid base,or with a combination of basemounting and suspensionmounting.
Syntron Electromagnetic Feeders are ideal for use in a stationary operation suchas a tunnel system from a surge pile. They are usually controlled from a remotepoint to provide the desired feed rate. In this application,a model FH-22 feeds limestone to a belt conveyor.
Syntron F-380 Electromagnetic Feeder withabove-deck drive unit evenly distributes parts at aconsistent rate to a heat treatment furnace.
Feeding gypsum with Syntron model F-380Electromagnetic Feeder.
6Syntron electromagnetic feeders, contd.
Sub-Resonant Tuning for Electromagnetic Feeders
Low sub-resonant tuning is thekey characteristic of Syntron
electromagnetic feeders, makingthem the most stable and consistentfeeders available on the market.
Feeder tuning involves adjustmentof the natural frequency of thefeeder in relationship to itsoperating frequency. If the operatingfrequency is greater than the naturalfrequency, the feeder is super-resonant tuned, making it veryunstable under headload.Conversely, if the natural frequencyis greater than the operatingfrequency, the feeder is sub-resonanttuned, making it more consistentand stable under headload.
Electromagnetic feeders are tunedthrough careful calculation of thenumber and thickness of the specialleaf springs required to accomplishthe desired tuning ratio.
Regardless of manufacturer, allheavy-duty, two-mass electro-magnetic vibrating feeders aresub-resonant tuned. For sub-resonanttuned feeders, the distance fromresonance is critical to feeder per-formance. Most manufacturers tunetheir feeders closer to resonance,while Syntron electromagneticfeeders are tuned further fromresonance.
The operating frequency of all Syntron Heavy-Duty Electromagnetic Feedersis checked at our test stations before shipment.
Material damping and othervariations in headload causefluctuations in capacity and feedrates of all sub-resonant tunedfeeders. Because Syntron electro-magnetic feeders are tuned furtherfrom resonance, capacity and feedrates remain more stable andconsistent even when the feeder issubjected to material damping andother variations in headload.
This is why Syntron electromagneticFeeders are the best solution forrugged material handlingapplications.
7www.fmctechnologies.com/materialhandling
Material Handling Solutions
Model FH-22
Model FH-24
Many other trough sizes are available. Capacities vary depending on drive unit location, material characteristics, material density,trough length and width, trough liner type, feeder installation, skirt boards and hopper transitions. Cad drawings are available.Please call FMC Technologies for expert help with your application.
A B C D E F G H J K L M N P
in 12 60 5 6 1/2 66 1/2 23 17 1/2 16 1/2 21 1/2 8 1/4 47 3/4 10 1/2 18 3/4 19 3/4mm 305 1524 127 165 1689 584 445 419 546 210 1213 267 476 502
in 18 42 5 15 5/16 57 5/16 26 3/4 17 1/2 18 23 8 5/16 40 9 24 3/4 19 3/4mm 457 1067 127 389 1456 679 445 457 584 211 1016 229 629 502
in 24 42 5 15 5/16 57 5/16 32 3/4 17 1/2 18 23 8 5/16 40 9 30 3/4 19 3/4mm 610 1067 127 389 1456 832 445 457 584 211 1016 229 781 502
A B C D E F G H J K L M N P
in 18 60 5 6 5/16 66 5/16 28 19 5/8 18 23 8 5/16 47 1/2 10 1/2 24 3/4 24 3/4mm 457 1524 127 160 1684 711 498 457 584 211 1207 267 629 629
in 24 48 5 12 5/16 60 5/16 32 3/4 19 1/4 18 23 8 5/16 41 7/8 10 1/8 30 3/4 19 3/4mm 610 1219 127 313 1532 832 489 457 584 211 1064 257 781 502
in 30 36 5 8 5/16 54 5/16 38 3/4 19 1/4 18 23 8 5/16 37 9 36 3/4 19 3/4mm 610 914 127 135 1380 984 489 457 584 211 940 229 933 502
Based on feeder with 10 down slope, below-deck drive unit,installed with proper hopper transition and skirt board arrangement,feeding dry sand weighing 100 pounds per cubic foot. 230/460/575Volt 60 Hz Single-Phase. 230/380/415 Volt 50 Hz Single-Phase.Above-deck drive units are available. Base mounting is available.
Trough Approx. Approx. Approx.W x L tph (460 V) Model Wt. (lb) Feeder/Control
12 x 60 45 5 Amps CRSDC-2C 480 575
18 x 42 110 5 Amps CRSDC-2C 460 555
24 x 42 150 5 Amps CRSDC-2C 480 575
Based on feeder with 10 down slope, below-deck drive unit,installed with proper hopper transition and skirt boardarrangement, feeding dry sand weighing 100 pounds per cubic foot.230/460/575 Volt 60 Hz Single-Phase. 230/380/415 Volt 50 Hz Single-Phase. Above-deck drive units are available.Base mounting is available.
Electromagnetic Feeder Specifications
Please request a certified drawing for installation.
Please request a certified drawing for installation.
Trough Approx. Approx. Approx.W x L tph (460 V) Model Wt. (lb) Feeder/Control
18 x 60 110 7 Amps CRSDC-2C 600 65024 x 48 150 7 Amps CRSDC-2C 600 65030 x 36 200 7 Amps CRSDC-2C 600 650
8Syntron electromagnetic feeders, contd.
Electromagnetic Feeder Specifications, contd.
Model F-330
Model F-380
Many other trough sizes are available. Capacities vary depending on drive unit location, material characteristics, material density,trough length and width, trough liner type, feeder installation, skirt boards and hopper transitions. Cad drawings are available.Please call FMC Technologies for expert help with your application.
A B C D E F G H J K L M N P
in 24 54 6 21 1/16 75 1/16 35 7/8 22 1/2 21 27 12 15/16 50 5/8 11 1/2 32 5/8 24 3/4mm 610 1372 152 535 1907 911 572 533 686 329 1286 292 829 629
in 30 48 6 24 1/8 72 1/8 417/8 22 1/2 21 27 13 50 5/8 8 1/2 38 5/8 24 3/4mm 762 1219 152 613 1832 1064 572 533 686 330 1286 216 981 629
A B C D E F G H J K L M N P
in 24 60 6 18 1/8 781/8 35 7/8 23 1/4 22 3/4 28 3/4 12 7/8 50 3/4 14 1/2 32 5/8 32mm 610 1524 152 460 1984 911 591 578 730 327 1289 368 829 813
in 30 60 6 18 1/8 78 1/8 41 7/8 23 1/4 22 3/4 28 3/4 12 7/8 50 3/4 14 1/2 38 5/8 36mm 762 1524 152 460 1984 1064 591 578 730 327 1289 368 981 91
in 36 48 6 24 1/8 721/8 47 7/8 23 1/4 22 3/4 28 3/4 12 7/8 50 3/4 81/2 44 5/8 26 1/4mm 914 1219 152 613 1832 1016 591 578 730 327 1289 216 1133 666
Based on feeder with 10 down slope, below-deck drive unit,installed with proper hopper transition and skirt boardarrangement, feeding dry sand weighing 100 pounds per cubicfoot. 230/460/575 Volt 60 Hz Single-Phase. 230/380/415 Volt 50 HzSingle-Phase. Above-deck drive units are available.Base mounting is available.
Based on feeder with 10 down slope, below-deck drive unit,installed with proper hopper transition and skirt boardarrangement, feeding dry sand weighing 100 pounds per cubicfoot. 230/460/575 Volt 60 Hz Single-Phase. 230/380/415 Volt 50 HzSingle-Phase.Above-deck drive units are available. Base mounting is available.
Please request a certified drawing for installation.
Please request a certified drawing for installation.
Trough Approx. Approx. Approx.W x L Capacity Current Control Net Ship Wt. (lb)
tph (460 V) Model Wt. (lb) Feeder/Control
24 x 54 180 13 Amps CRSDC-2C 1130 120030 x 48 270 13 Amps CRSDC-2C 1130 1200
Trough Approx. Approx. Approx.W x L Capacity Current Control Net Ship Wt. (lb)
tph (460 V) Model Wt. (lb) Feeder/Control
24 x 60 180 18 Amps CRSDC-2C 1370 140030 X 60 300 18 Amps CRSDC-2C 1400 145036 x 48 350 18 Amps CRSDC-2C 1400 1450
A B C D E F G H J K L M N P
in 36 72 7 26 3/16 98 3/16 47 5/8 33 29 3/8 36 3/8 17 7/16 59 7/8 20 7/8 44 5/8 37 3/4mm 914 1829 178 665 2494 1210 838 746 924 443 1521 530 1133 959
in 42 60 7 32 3/16 92 3/16 53 21/32 33 29 11/32 36 11/32 17 7/16 59 13/16 14 15/16 50 21/32 37 3/4mm 1067 1524 178 818 2342 1363 838 745 923 443 1519 379 1287 959
9www.fmctechnologies.com/materialhandling
Material Handling Solutions
Model F-440
Model F-450
Many other trough sizes are available. Capacities vary depending on drive unit location, material characteristics, material density,trough length and width, trough liner type, feeder installation, skirt boards and hopper transitions. Cad drawings are available.Please call FMC Technologies for expert help with your application.
A B C D E F G H J K L M N P
in 30 72 7 26 3/16 98 3/16 43 1/2 33 27 3/4 34 3/4 17 3/16 59 9/16 21 7/16 40 1/4 37 3/4mm 762 1829 178 665 2494 1105 838 705 883 437 1513 545 1022 959
in 36 60 7 32 3/16 92 3/16 49 1/2 33 28 1/4 35 1/4 17 3/16 59 9/16 15 7/16 46 1/4 37 3/4mm 914 1524 178 818 2342 1257 838 718 895 437 1513 385 1175 959
Based on feeder with 10 down slope, below-deck drive unit,installed with proper hopper transition and skirt boardarrangement, feeding dry sand weighing 100 pounds per cubicfoot. 230/460/575 Volt 60 Hz Single-Phase. 230/380/415 Volt 50 HzSingle-Phase.Above-deck drive units are available. Base mounting is available.
Please request a certified drawing for installation.
Based on feeder with 10 down slope, below-deck drive unit,installed with proper hopper transition and skirt boardarrangement, feeding dry sand weighing 100 pounds per cubicfoot. 230/460/575 Volt 60 Hz Single-Phase. 230/380/415 Volt 50 HzSingle-Phase.Above-deck drive units are available. Base mounting is available.Please request a certified drawing for installation.
Trough Approx. Approx. Approx.W x L Capacity Current Control Net Ship Wt. (lb)
tph (460 V) Model Wt. (lb) Feeder/Control
30 X 72 300 20 Amps CRSDC-2C 2400 247536 X 60 350 20 Amps CRSDC-2C 2400 2475
Trough Approx. Approx. Approx.W x L Capacity Current Control Net Ship Wt. (lb)
tph (460 V) Model Wt. (lb) Feeder/Control
36 X 72 350 25 Amps CRSDC-2C 3125 320042 X 60 550 25 Amps CRSDC-2C 3100 3250
10
Syntron electromagnetic feeders, contd.
Electromagnetic Feeder Specifications, contd.
Model F-480
Model F-560
Many other trough sizes are available. Capacities vary depending on drive unit location, material characteristics, material density,trough length and width, trough liner type, feeder installation, skirt boards and hopper transitions. Cad drawings are available.Please call FMC Technologies for expert help with your application.
A B C D E F G H J K L M N P
in 42 84 7 23 15/16 107 15/16 54 3/8 33 30 11/16 37 11/16 17 7/16 71 1/2 19 50 3/4 51mm 1067 2134 178 608 2742 1381 838 779 957 443 1816 483 1289 1295
in 48 72 7 28 1/16 100 1/16 60 3/8 33 27 13/16 34 13/16 17 1/2 61 5/8 21 56 3/4 57mm 1219 1829 178 713 2542 1534 838 706 884 445 1565 533 1441 1448
A B C D E F G H J K L M N P
in 54 72 8 48 3/8 120 3/8 66 3/4 51 1/2 35 1/2 43 1/2 21 3/8 80 19 63 63 1/2mm 1372 1829 203 1229 3058 1695 1308 902 1105 543 2032 483 1600 1613
Based on feeder with 10 down slope, below-deck drive unit,installed with proper hopper transition and skirt boardarrangement, feeding dry sand weighing 100 pounds per cubicfoot. 460/575 Volt 60 Hz Single-Phase. 380/415 Volt 50 HzSingle-Phase.Above-deck drive units are available. Base mounting is available.
Based on feeder with 10 down slope, below-deck drive unit,installed with proper hopper transition and skirt boardarrangement, feeding dry sand weighing 100 pounds per cubicfoot. 460/575 Volt 60 Hz Single-Phase. 380/415 Volt 50 HzSingle-Phase.Above-deck drive units are available. Base mounting isavailable.
Please request a certified drawing for installation.
Please request a certified drawing for installation.
Trough Approx. Approx. Approx.W x L Capacity Current Control Net Ship Wt. (lb)
tph (460 V) Model Wt. (lb) Feeder/Control
42 X 84 550 31.5 Amps CRSDC-2C 4100 420048 X 72 700 31.5 Amps CRSDC-2C 4000 4100
Trough Approx. Approx. Approx.W x L Capacity Current Control Net Ship Wt. (lb)
tph (460 V) Model Wt. (lb) Feeder/Control
54 X 72 800 27 Amps CRSDC-2C 8500 9000
11www.fmctechnologies.com/materialhandling
Material Handling Solutions
Model F-660
Model F-88
A B C D E F G H J K L M N P
in 60 90 8 40 130 72 1/2 51 1/2 39 1/2 47 1/2 21 1/2 96 15 1/2 69 63 1/2mm 1524 2286 203 1016 3302 1842 1308 1003 1207 546 2438 394 1753 1613
A B C D E F G H J K L M N P
in 72 96 8 49 9/16 145 9/16 87 51 1/2 40 3/32 48 3/32 22 3/4 103 9/16 19 1/4 82 63 1/2mm 1829 2438 203 1259 3697 2210 1308 1018 1222 578 2630 489 2083 1613
Based on feeder with 10 down slope, below-deck drive unit,installed with proper hopper transition and skirt boardarrangement, feeding dry sand weighing 100 pounds per cubicfoot. 460/575 Volt 60 Hz Single-Phase. 380/415 Volt 50 HzSingle-Phase.Above-deck drive units are available. Base mounting is available.Please request a certified drawing for installation.
Based on feeder with 10 down slope, below-deck drive unit,installed with proper hopper transition and skirt boardarrangement, feeding dry sand weighing 100 pounds per cubicfoot. 460/575 Volt 60 Hz Single-Phase. 380/415 Volt 50 HzSingle-Phase.Above-deck drive units are available. Base mounting is available.Please request a certified drawing for installation.
Trough Approx. Approx. Approx.W x L Capacity Current Control Net Ship Wt. (lb)
tph (460 V) Model Wt. (lb) Feeder/Control
60 X 90 1000 31.5 Amps CRSDC-2C 9200 9300
Trough Approx. Approx. Approx.W x L Capacity Current Control Net Ship Wt. (lb)
tph (460 V) Model Wt. (lb)Feeder/Control
72 X 96 1600 70 Amps CRSDC-3C 11400 12000
Many other trough sizes are available. Capacities vary depending on drive unit location, material characteristics, material density,trough length and width, trough liner type, feeder installation, skirt boards and hopper transitions. Cad drawings are available.Please call FMC Technologies for expert help with your application.
12
Syntron electromagnetic feeders, contd.
Electromagnetic Feeder TroughsSyntron Electromagnetic Feeder models FH-22 through F-88 can be fur-nished with standard flat-bottom troughs, special flat-bottom troughs orbelt-centering discharge troughs.
Drive units can be positioned either above or below the trough. A below-deckdrive unit is most commonly used, but above-deck drive units can besupplied for installations where there is insufficient space below the trough.However, an above-deck drive unit may reduce feeder capacity slightly.
Capacities for feeder models with standard troughs are based on dry sandweighing 100 pounds per cubic foot. Capacities vary depending on drive unitlocation, material characteristics, material density, trough length and width,trough liner type, feeder installation, skirt boards and hopper transitions.
Several trough options are available for special applications. Syntron extra-long feeder troughs can be supplied with either below-deck or above-deckmultiple electromagnetic drive units. Extra-long feeder troughs provide manyadvantages in conveying materials over long distances; unlike belt conveyors,there are no idlers or pulley drive units to wear, lubricate, or replace. Longtubular troughs can convey pure, clean materials without atmospheric con-tamination and safely convey dusty, poisonous materials without endangeringprocessing personnel.
Other trough options include: Syntron vibrating inspection tables feed material forward at a smooth,controlled rate of flow. This enables an operator to remove materialthat does not meet specification.
Syntron spreader feeders spread a wide, even layer of material witha diagonal discharge trough or diagonal-slotted trough.
Electrically heated trough liner plates minimize accumulation of damp orwet materials in feeder troughs. Available only on specially designed feeders,heated liner plates increase feeder efficiency by eliminating the downtimerequired to clean troughs. They are especially effective for materials withmoisture contents ranging from five to fifteen percent. The electric heatingelement is insulated and sandwiched between two steel plates.
Standard flat-bottom trough,below-deck drive unit.
Tubular trough, below-deckdrive unit.
Flat bottom trough, above-deckdrive unit.
Diagonal discharge spreader feeder.
Other Trough Options Include:
Covered Trough with Dust Seals
Open Trough with Dust Seals
Screening Feeders
Diagonal Discharge Trough
Belt-Centering Discharge Trough
Trough Liner Options Include:
T-1A
AR-400
AR-500
Stainless Steel
UHMW Plastic
Rubber
Ceramic
Carbide Overlay
13www.fmctechnologies.com/materialhandling
Material Handling Solutions
An eight-foot wide by twenty-four inch long troughpowered by four Syntron F-330 electromagnetic driveunits.
Electromagnetic drive units with tubular trough.
Sixteen foot, triple drive unit Syntron F-440Electromagnetic Feeder conveyor.
Syntron F-560 Electromagnetic Feeder with twodrive units.
Syntron Electromagnetic drive units can becombined to create feeders ideally suited for specialapplications.
Multiple-drive units, positioned one behind the other,result in a long, vibrating conveyor. When an especiallywide material layer is desired, multiple-drive units canbe placed side by side on extra wide feeder troughs.The number of drive units required is determined bythe trough width and length.
Dual-twin drive units two sets of twin drive units,one set placed behind the other provide bothincreased capacity and the ability to handle exceptionallyheavy loads.
The material flow rate of all multiple-drive unit modelscan be easily regulated. A special control permitsadjustment of all drive units simultaneously to controlthe flow rate of the entire feeder.
A selection of some of the available multiple-driveunit configurations.
Multiple-Drive Unit Electromagnetic Feeders
14
Syntron electromagnetic feeders, contd.
Syntron Electromagnetic FeederControls are state-of-the-art, solid-state units that control materialflow.
Syntron controls provide infinitevariable control of material feedrates. The CRSDC-2C Series con-trols are the standard for SyntronHeavy-Duty ElectromagneticFeeders. They operate on half-wave rectification of AC powerand provide adjustable controlwith a 10:1 turndown ratio.CRSDC-2C controls contain anSCR (silicon controlled rectifier)and produce 3600 vibrations perminute at 60 Hz operation.
These compact controls conform toNational Electrical ManufacturersAssociation (NEMA) standards.They are designed for easyservicing or part replacement.
In addition to the standardfeatures, a wide range of optionalfunctions are available for theCRSDC-2C series controls. Basiccontrol arrangements aredescribed on the next page.
Syntron Heavy-Duty Electromagnetic Feeder Controls
NetControl Weight
Feeder Model Dimensions (inches) (lb)
FH-22 through F-660 20 W 20 H 9 D 53
F-88 24 W 24 H 14 D 72
Electromagnetic Feeder Controls
CRSDC-2C Series Electromagnetic Feeder Control
15www.fmctechnologies.com/materialhandling
Material Handling Solutions
Syntron Heavy-Duty Electromagnetic Vibrating Feeder Controls
Standard Solid-State DC Signal Control
Two-Rate Automatic Scale Control
Constant-Stroke Control
Remote Control Solid-State Proportional Controls
Solid-State Load Monitoring Controls
Solid-state DC signal controls accept a variable dc signal from anexternal source and use it to vary the feed rate.
Perfect for batch weighing or bagging operations. Externalscale switches connected to the control automatically signalprimary fast material flow, secondary dribble flow and instantshut-off at exactly the pre-selected weight.
Constant-stroke controls automatically maintain the trough strokeat any pre-set rate through the use of a trough-mounted inertialstroke transducer (IST).
Solid-state proportional controls permit individual material flowsettings on multiple feeders for a desired blend of materials. Amaster control potentiometer permits simultaneous flow rateregulation of all the feeders.
Remote controls permit manual adjustment of the feeder flow ratefrom a remote station located at a distance from the feeder.
Solid-state load monitoring controls sense the electrical load onprocess equipment motors to determine when the machine isapproaching an overload or underload condition and automaticallyadjust feeder output to correct machine loading.
Syntron Heavy-Duty Electromechanical Feedersare available in a number of models with capacitiesranging from 100 to 4,000 tons per hour.* Above-deck drive units are available, but will provideslightly lower capacities.
Syntron Electromechanical Feeders are ruggedlyconstructed to reduce maintenance and improveproduction efficiency.
ControlsDependable, flexible solid-state control sets Syntronheavy-duty feeders apart from other feeding andconveying machinery. Feed rates are easily adjusted.Response is instantaneous. Control devices can besupplied for integration in systems using externalsignals from automatic sensing devices in instru-ments. Special control arrangements are alsoavailable for selecting and sequencing a group offeeders.
Variable frequency controls for RF and MF feedersprovide linear feed rate and are available for eitherlocal or remote control operation. Control compo-nents are enclosed in a sturdy wall-mounted enclo-sure, and are available in general purpose, dust-tight, watertight or explosion-proof construction.For more information about electromechanicalfeeder controls, see page 27.
Trough SelectionFeeder troughs for RF and MF feeders are one-pieceunitized weldments providing a rigid durabletrough to meet application requirements. Troughswith bolt-together construction are available fortunnel installations or other confined areas.
Standard finish includes a heavy-duty epoxyenamel. Stainless steel troughs are also available.Special coatings and trough liners are availableoptions to satisfy application requirements.
Syntron Electromechanical Feeders
Syntron MF-200 Electromechanical Feeder feeding rockfrom primary crusher to belt conveyor.
Syntron RF-120 Electromechanical Feeder handles mediumloads.
16
Increase bulk handling productivity with controlled high feed rate units.
Syntron electromechanical feeders
* Based on dry sand weighing 100 pounds per cubicfoot. Capacities vary depending on material density,trough liner type, trough length, trough width, hoppertransitions and skirt board arrangement.
Sub-resonant Tuning for Electromechanical Feeders
Stroke consistency and speed stability for high-capacity feeding.
17www.fmctechnologies.com/materialhandling
Material Handling Solutions
Figure 1. Comparison of Tuning Ratios
Sub-Resonant Tuning forElectromechanical Feeders
Low sub-resonant tuning is the key char-acteristic of Syntron electromechanicalfeeders, making them the most stableand consistent feeders available on themarket.
Feeder tuning involves adjustment of thenatural frequency of the feeder inrelationship to its operating frequency.If the operating frequency is greaterthan the natural frequency, the feeder issuper-resonant tuned, making it veryunstable under headload. Conversely, ifthe natural frequency is greater than theoperating frequency, the feeder is sub-resonant tuned, making it more consistentand stable under headload.
Regardless of manufacturer, all heavy-duty,two-mass electromechanical vibratingfeeders are sub-resonant tuned. For sub-resonant tuned feeders, the distance fromresonance is critical to feeder performance.Most manufacturers tune their feederscloser to resonance, while Syntron feedersare tuned further from resonance.
Material damping and other variations inheadload cause fluctuations in capacityand feed rates of all sub-resonant tunedfeeders. Because Syntron electromechan-ical feeders are tuned further from reso-nance, capacity and feed rates remainmore stable and consistent even when thefeeder is subjected to material dampingand other variations in headload. Inaddition, Syntron electromechanicalfeeder design incorporates internaldamping, which contributes to theirstability and consistency.
On the comparison chart (Figure 1),curve 1 represents a typical competitivefeeder in a no-load state without internaldamping. Curve 2 represents a Syntronfeeder in a no-load state with internaldamping. Curve 3 represents a feederwith material headload and associated
damping. Because Syntron feeders aretuned further from resonance and aredesigned with internal damping, it isevident that the loss in relative troughstroke under headload for a Syntronfeeder (Y) is negligible as compared to asubstantial loss in relative trough strokefor competitive feeders (X). This is whySyntron electromechanical feeders aremore consistent and stable than anyother feeder, even when subjected tomaterial damping and other variationsin headload.
Syntron RF electromechanical feeders
18
RF Medium-Duty Electromechanical FeedersThese master material movers can feed it all.
Two Syntron RF medium-duty electromechanical feedersfeeding coal onto a belt conveyor.
Syntron RF Medium-Duty ElectromechanicalVibrating Feeders meet the varying, mid-rangebulk material handling needs of industry.Capable of handling a wide range of materials,these two models provide feed rate capacitiesfrom 100 to 600 tons per hour.*
Syntron RF feeders are two-mass vibratingunits; the trough is one mass and the exciterunit is the other. The exciter is belt-driven by astandard-frame induction motor and connectedto the trough with long-life polymeric shearsprings. The ball bearings in the exciter unithave a minimum life expectancy of 20,000 L10hours.
Variable pitch motor sheaves provide a positivemethod of tuning. This Syntron design permitshigher feed capacities from smaller troughsizes, enabling you to select a more economicalunit to meet your capacity requirements.
Variable operating speeds and trough stroke,combined with the damping characteristics ofpolymeric shear springs, are significant factorsin the performance capabilities of Syntron RFMedium-Duty Electromechanical Feeders.
All Syntron RF Feeder motors are labeled forinverter duty and vibration service and arefurnished with a cast-iron frame. Special motorscan be supplied to meet UL explosion-proofrequirements.
* Based on dry sand weighing 100 pounds percubic foot. Capacities vary depending onmaterial density, trough liner type, troughlength, trough width, hopper transitions andskirt board arrangement.
Syntron RF Electromechanical Feeder
19www.fmctechnologies.com/materialhandling
Material Handling Solutions
Model RF-80
Model RF-120
RF Medium-Duty Feeder Specifications
Many other trough sizes are available. Capacities vary depending on material density, trough liner type, trough length, trough widthand hopper transitions and skirt board arrangement. Cad drawings are available. Please call FMC Technologies for expert help withyour application.
A B C D E F G H J K L M N S max S min T U V W
in 30 48 7 4 50 3/16 43 1/4 22 1/2 16 1/8 24 3/8 7 3/8 39 7/8 6 5/8 36 3/4 42 17 6 5 1 1mm 762 1219 178 102 1275 1099 572 410 619 187 1013 168 933 1067 432 152 127 25 25
in 30 54 7 4 51 3/8 43 1/4 22 1/2 15 7/8 25 1/4 7 3/8 46 1/4 6 3/4 36 3/4 49 24 6 5 2 4mm 762 1372 178 102 1305 1099 572 403 641 187 1175 171 933 1245 610 152 127 51 102
A B C D E F G H J K L M N S max S min T U V W
in 36 60 8 4 56 7/8 49 1/4 25 1/2 16 1/2 26 15/16 7 1/8 53 1/2 3 5/8 42 3/4 42 17 6 5 2 1/2 4 1/2mm 914 1524 203 102 1445 1251 648 419 684 181 1359 92 1086 1067 432 152 127 64 114
in 36 72 8 4 62 1/16 49 1/4 25 1/2 15 9/16 28 1/16 7 1/8 63 1/16 5 1/8 42 3/4 42 17 6 5 2 1/2 6mm 914 1829 203 102 1576 1251 648 395 713 181 1602 130 1086 1067 432 152 127 64 152
Please request a certified drawing for installation.
Trough Capacity HP Approx. Control Net Ship Wt.W x L Current (460 V) Model Wt. Feeder/Control
30 x 48 400 1 1.5 VF-1S 1150 135030 x 54 400 1 1.5 VF-1S 1200 1400
Based on feeder with 10 down slope, below-deck drive unit, installedwith proper hopper transition and skirt board arrangement, feedingdry sand weighing 100 pounds per cubic foot. 230/460/575 Volt 60 HzSingle-Phase. 230/380/415 Volt 50 Hz Single-Phase.
Please request a certified drawing for installation.
Trough Capacity HP Approx. Control Net Ship Wt.W x L Current (460 V) Model Wt. Feeder/Control
36 x 60 600 2 3.0 VF-2S 1600 180036 x 72 600 2 3.0 VF-2S 1650 1850
Based on feeder with 10 down slope, below-deck drive unit,installed with proper hopper transition and skirt boardarrangement, feeding dry sand weighing 100 pounds per cubic foot.230/460/575 Volt 60 Hz Single-Phase. 230/380/415 Volt 50 HzSingle-Phase.
20
MF Heavy-Duty Electromechanical FeedersThe high-capacity performers.
Syntron MF Heavy-Duty Electromechanical Feedersare the heavy-weights of bulk material handling andare used for higher capacity requirements. The eightheavy-duty models handle capacities from 100 to 4,000tons per hour.*
Syntron Heavy-Duty Electromechanical Feeders combineextra structural strength with durable com-ponents.The deep wing plates form a bridge between inlet anddischarge suspension supports, providing extra strengthfor years of dependable service. Standard troughsfeature unitized weldmentsone-piece, completelywelded units for greater strength. Troughs are alsoavailable with bolt-together construction for tunnelinstallations or other confined areas.
MF Heavy-Duty Electromechanical Feeders are two-mass, spring-connected and sub-resonant-tuned. Theexciter unit is connected to the trough with corrosionresistant polymeric springs, which are more stableunder varying conditions. The springs are compressedfor improved load stability, improved feed angles andstraight line motion. The spring design eliminatespinch points, an important safety feature. Exciters inthese heavy-duty feeders use double roll, spherical rollerbearings, with L10 expectancies up to 140,000 hours.
All Syntron MF Electromechanical Feeder motors arelabeled for inverter duty and vibration service, and arefurnished with a cast-iron frame. Special motors canbe supplied to meet UL explosion-proof requirements.
Attachments for safety cables are included on allSyntron feeders.
Syntron MF-200 Electromechanical Feeder feedingcrushed stone in an aggregate operation.
Syntron MF electromechanical feeders
Syntron MF-200 Electromechanical Feeder feedingslag at 250 TPH to a crusher.
* Based on dry sand weighing 100 pounds per cubicfoot. Capacities vary depending on material character-istics, material density, trough length and width, troughliner type, feeder installation, skirt boards and hoppertransitions.
21www.fmctechnologies.com/materialhandling
Material Handling Solutions
MF Electromechanical Feeder Features Operating frequency - 1100 VPM at 60Hz
Stroke: 0.25 - 0.30 inches
Start and operate in empty or fully-loaded state
Dependable, flexible, easily adjustable control
Precise sub-resonant tuning ratio- Stroke consistency and speed stability undervarying material conditions
- Reduces effects of varying headload andmaterial damping
Structural strength- Deep wing plates- Unitized weldments
Infinite unbalance adjustment- Achieve desired stroke with easy adjustment
Suitable for use in hazardous areas- Explosion-proof motors required by coal, coke orother hazardous environments are available
Bolt-in trough liners
Syntron MF-600 Electromechanical Feeder feedingrock to a crusher.
Syntron MF-400 Electromechanical Feeder feedingcoal from a truck dump hopper to a belt conveyor.
Syntron MF-1600 Electromechanical Feeder feedingrock from the primary crusher to a belt conveyor.
22
Syntron MF electromechanicalfeeders, contd.
MF Heavy-Duty Feeder Specifications
Model MF-200
A B C D E F G H J K L M N P R S T U V W
in 36 72 8 2 1/2 81 3/16 60 1/2 30 23 1/8 35 5/8 65 1/4 8 3/8 54 45 1/2 21 3/4 19 8 7 1/4 2 2 9 7/16mm 914 1829 203 64 2062 1537 762 587 905 1657 213 1372 1156 552 483 203 184 51 51 240
in 48 84 8 4 87 1/8 72 1/2 30 22 1/16 36 11/16 71 1/4 6 13/16 66 57 1/2 25 21 3/4 9 8 -- 3 7 13/16mm 1219 2134 203 102 2213 1842 762 560 932 1810 173 1676 1461 635 552 229 203 -- 76 198
in 48 96 8 4 93 72 1/2 30 21 37 3/4 76 1/4 10 7/8 66 57 1/2 25 21 3/4 9 8 2 2 12mm 1219 2438 203 102 2362 1842 762 533 959 1937 276 1676 1461 635 552 229 203 51 51 305
in 54 96 8 4 93 77 30 21 34 3/4 74 7/8 12 1/8 72 72 21 3/4 21 3/4 8 8 2 2 10mm 1372 2438 203 102 2362 1956 762 533 883 1902 308 1829 1829 552 552 203 203 51 51 254
Many other trough sizes are available. Capacities vary depending on material density, trough liner type, trough length, trough width, hoppertransitions and skirt board arrangement. Cad drawings are available. Please call FMC Technologies for expert help with your application.
Please request a certified drawing for installation.
Model MF-300
Based on feeder with 10 down slope, below-deck drive unit,installed with proper hopper transition and skirt boardarrangement, feeding dry sand weighing 100 pounds per cubicfoot. 460/575 Volt 60 Hz Single-Phase. 380/415 Volt 50 HzSingle-Phase.Please request a certified drawing for installation.
Approx. Approx. Approx. Approx.Trough Capacity HP Current Control Net Ship Wt. (lb)W x L (tph) (460 V) Model Wt. (lb) Feeder/Control
36 x 72 600 5 7.0 Amps VF-5S 2200 280048 x 84 900 5 7.0 Amps VF-5S 2500 310048 x 96 900 5 7.0 Amps VF-5S 2600 320054 x 96 1000 5 7.0 Amps VF-5S 2800 3400
Based on feeder with 10 down slope, below-deck drive unit,installed with proper hopper transition and skirt boardarrangement, feeding dry sand weighing 100 pounds per cubic foot.460/575 Volt 60 Hz Single-Phase. 380/415 Volt 50 Hz Single-Phase.
Approx. Approx. Approx. Approx.Trough Capacity HP Current Control Net Ship Wt. (lb)W x L (tph) (460 V) Model Wt. (lb) Feeder/Control
36 x 72 800 5 7.0 Amps VF-5S 2300 290048 x 84 1200 5 7.0 Amps VF-5S 2600 3200
A B C D E F G H J K L M N P R S T U V W
in 36 72 8 10 9/16 84 59 30 24 1/6 36 5/6 65 1/16 8 3/6 54 45 1/2 213/4 19 8 7 1/4 2 2 9 7/16mm 914 1829 203 268 2134 1499 762 613 930 1653 213 1372 1156 552 483 203 184 51 51 240
in 48 84 8 8 5/16 86 5/16 71 30 36 3/4 37 11/16 71 3/16 6 13/16 66 57 1/2 213/4 213/4 8 8 3 7 13/16mm 1219 2134 203 211 2192 1803 762 933 957 1808 173 1676 1461 552 552 203 203 25 76 198
A B C D E F G H J K L M N P R S T U V W
in 66 108 8 8 120 1/8 99 45 30 1/8 48 7/8 94 13 5/8 90 81 1/8 32 1/2 33 1/4 11 3/4 11 3/4 2 2 14 11/16mm 1676 2743 203 203 3051 2515 1143 765 1241 2388 346 2286 2061 826 845 298 298 51 51 373
in 72 96 8 8 114 1/4 105 45 31 3/16 47 13/16 85 3/16 12 3/4 96 87 1/8 32 1/2 33 1/4 11 3/4 11 3/4 2 3 13 11/16mm 1829 2438 203 203 2902 2667 1143 792 1214 2164 324 2438 2213 826 845 298 298 51 76 348
23www.fmctechnologies.com/materialhandling
Material Handling Solutions
Model MF-400
Model MF-600
A B C D E F G H J K L M N P R S T U V W
in 54 84 8 2 1/2 105 1/16 80 1/2 38 28 3/8 42 15/16 80 10 3/4 74 63 1/2 26 1/2 21 3/4 9 8 2 2 11 13/16mm 1372 2134 203 64 2669 2045 965 721 1091 2032 273 1880 1613 673 552 229 203 51 51 300
in 54 96 8 2 1/2 113 5/16 80 1/2 38 28 3/16 44 13/16 85 5/16 10 3/4 74 63 1/2 26 21 3/4 9 8 2 2 11 13/16mm 1372 2438 203 64 2878 2045 965 716 1138 2167 273 1880 1613 660 552 229 203 51 51 300
in 60 84 8 2 1/2 105 1/16 88 1/2 38 28 3/8 42 15/16 80 1/2 10 3/4 82 69 1/2 26 1/2 21 3/4 9 8 2 2 11 13/16mm 1524 2134 203 64 2669 2248 965 721 1091 2045 273 2083 1765 673 552 229 203 51 51 300
in 60 96 8 8 113 5/16 90 1/2 38 28 3/16 44 13/16 85 3/4 11 1/4 84 69 1/2 26 21 3/4 9 8 2 2 12 5/16mm 1524 2438 203 203 2878 2299 965 716 1138 2178 286 2134 1765 660 552 229 203 51 51 313
in 66 96 8 2 1/2 113 5/16 96 1/2 38 28 3/16 44 13/16 85 3/4 11 1/4 90 75 1/2 26 21 3/4 9 8 2 2 12 5/16mm 1676 2438 203 64 2878 2451 965 716 1138 2178 286 2286 1918 660 552 229 203 51 51 313
in 72 96 8 2 1/2 114 3/4 98 1/2 38 28 3/4 45 5/16 86 1/2 11 1/4 92 81 1/2 26 21 3/4 9 8 2 2 12 5/16mm 1829 2438 203 64 2915 2502 965 729 1151 2197 286 2337 2070 660 552 229 203 51 51 313
Please request a certified drawing for installation.
Please request a certified drawing for installation.
Many other trough sizes are available. Capacities vary depending on material density, trough liner type, trough length, trough width, hoppertransitions and skirt board arrangement. Cad drawings are available. Please call FMC Technologies for expert help with your application.
Based on feeder with 10 down slope, below-deck drive unit,installed with proper hopper transition and skirt board arrangement,feeding dry sand weighing 100 pounds per cubic foot. 460/575 Volt60 Hz Single-Phase. 380/415 Volt 50 Hz Single-Phase.
Based on feeder with 10 down slope, below-deck drive unit,installed with proper hopper transition and skirt board arrangement,feeding dry sand weighing 100 pounds per cubic foot. 460/575Volt 60 Hz Single-Phase. 380/415 Volt 50 Hz Single-Phase.
Approx. Approx. Approx. Approx.Trough Capacity HP Current Control Net Ship Wt. (lb)W x L (tph) (460 V) Model Wt. (lb) Feeder/Control
54 x 84 900 10 12 Amps VF-10S 4500 520054 x 96 1000 10 12 Amps VF-10S 4600 530060 x 84 1000 10 12 Amps VF-10S 4600 530060 x 96 1200 10 12 Amps VF-10S 4800 540066 x 96 1400 10 12 Amps VF-10S 4900 560072 x 96 1600 10 12 Amps VF-10S 5100 5800
Approx. Approx. Approx. Approx.Trough Capacity HP Current Control Net Ship Wt. (lb)W x L (tph) (460 V) Model Wt. (lb) Feeder/Control
66 x 108 1600 15 18.5 Amps VF-15S 8300 910072 x 96 1800 15 18.5 Amps VF-15S 8100 8900
24
Many other trough sizes are available. Capacities vary depending on material density, trough liner type, trough length, trough width, hoppertransitions and skirt board arrangement. Cad drawings are available. Please call FMC Technologies for expert help with your application.
Model MF-1000
A B C D E F G H J K L M N P R S T U V W
in 72 120 10 10 143 7/16 109 58 33 1/2 54 5/16 106 1/8 17 3/8 98 87 1/4 33 1/4 33 1/4 12 1/2 11 3/4 3 3 18 3/4mm 1829 3048 254 254 3643 2769 1473 851 1380 2696 441 2489 2216 845 845 318 298 76 76 476
in 84 132 10 10 149 3/8 121 58 32 7/16 55 3/8 116 1/2 16 5/8 110 110 33 1/4 32 1/2 12 1/2 11 3/4 3 3 15mm 2134 3353 254 254 3794 3073 1473 824 1407 2959 422 2794 2794 845 826 318 298 76 76 381
Please request a certified drawing for installation.
Model MF-800
A B C D E F G H J K L M N P R S T U V W
in 72 108 10 8 1/2 128 5/8 107 50 32 7/16 51 1/8 93 1/4 16 3/8 96 87 1/4 33 1/4 33 1/4 12 1/2 11 3/4 3 3 17 5/8mm 1829 2743 254 216 3267 2718 1270 824 1299 2369 416 2438 2216 845 845 318 298 76 76 448
in 84 108 8 8 128 5/8 117 45 31 11/16 51 1/8 94 16 5/8 108 99 1/8 32 1/2 33 1/4 11 3/4 11 3/4 2 2 14 11/16mm 2134 2743 203 203 3267 2972 1143 805 1299 2388 422 2743 2518 826 845 298 298 51 51 373
Please request a certified drawing for installation.
Based on feeder with 10 down slope, below-deck drive unit,installed with proper hopper transition and skirt board arrangement,feeding dry sand weighing 100 pounds per cubic foot. 460/575 Volt60 Hz Single-Phase. 380/415 Volt 50 Hz Single-Phase.
Approx. Approx. Approx. Approx.Trough Capacity HP Current Control Net Ship Wt. (lb)W x L (tph) (460 V) Model Wt. (lb) Feeder/Control
72 x 108 1800 20 25.5 Amps VF-20S 11550 1235084 x 108 2300 20 25.5 Amps VF-20S 12350 13150
Based on feeder with 10 down slope, below-deck drive unit,installed with proper hopper transition and skirt board arrangement,feeding dry sand weighing 100 pounds per cubic foot. 460/575 Volt60 Hz Single-Phase. 380/415 Volt 50 Hz Single-Phase.
Approx. Approx. Approx. Approx.Trough Capacity HP Current Control Net Ship Wt. (lb)W x L (tph) (460 V) Model Wt. (lb) Feeder/Control
72 x 120 2000 25 28.5 Amps VF-25S 13500 1450084 x 132 2500 25 28.5 Amps VF-25S 14000 15000
MF Heavy-Duty Feeder Specifications, contd.
Syntron MF electromechanicalfeeders, contd.
25www.fmctechnologies.com/materialhandling
Material Handling Solutions
Model MF-1600
Model MF-2000
Many other trough sizes are available. Capacities vary depending on material density, trough liner type, trough length, trough widthand hopper transitions and skirt board arrangement. Cad drawings are available. Please call FMC Technologies for expert help withyour application.
A B C D E F G H J K L M N P R S T U V W
in 90 132 10 10 161 1/8 127 80 36 11/16 59 5/8 113 1/2 22 1/2 116 116 53 53 27 27 4 4 19 1/2mm 2286 3353 254 254 4093 3226 2032 932 1514 2883 572 2946 2946 1346 1346 686 686 102 102 495
The largest Syntron ElectromechanicalFeeder is the MF-2000. With a troughmeasuring 120-inches wide x 168-incheslong, the MF-2000 has capacities up to4,000 tph. Each one is custom built tomeet demanding capacity requirements.Please contact FMC Technologies fordimensions.
Please request a certified drawing for installation.
Based on feeder with 10 down slope, below-deck drive unit,installed with proper hopper transition and skirt board arrangement,feeding dry sand weighing 100 pounds per cubic foot. 460/575 Volt60 Hz Single-Phase. 380/415 Volt 50 Hz Single-Phase.
Approx. Approx. Approx. Approx.Trough Capacity HP Current Control Net Ship Wt. (lb)W x L (tph) (460 V) Model Wt. (lb) Feeder/Control
90 x 132 3200 30 35.0 VF-30S 19800 21600
A Syntron MF-2000 Electromechanical Feeder measuring72-inches wide by 240-inches long is custom built to feedcoal at 1000 tph.
26
Belt Centering Discharge directs material on to abelt.
Flat Bottom Troughs are standard.
Grizzly Bar Sections for scalping or coarse screening.
Tubular Troughs seal path of dusty materials.
All standard troughs are unitized welded constructionand can be supplied in a variety of materials. Specialcoatings and liners are available, including abrasion-resistant steel, manganese, stainless steel, urethane,UHMW plastic, rubber overlay and ceramic tiles.
Optional above-deck drive units can be furnished forinstallations where there is insufficient space belowthe trough. Covers, down spouts and belt centeringdischarges can also be provided.
MF Heavy-Duty Feeder Trough Styles
Other Trough Options Include:
Covered Trough with Dust Seals
Open Trough with Dust Seals
Screening Feeders
Diagonal Discharge Trough
Trough Liner Options Include:
T-1A Carbide Overlay
AR-400 Ceramic
AR-500 Rubber
Stainless Steel UHMW Plastic
Syntron MF electromechanicalfeeders, contd.
27www.fmctechnologies.com/materialhandling
Material Handling Solutions
Syntron Electromechanical Feeder Controls
Feeder Control Net WeightModel Dimensions (inches) (lb)
Width Height Depth
RF-80, RF-120 2 7/8 6 13/16 5 7/8 3MF-200, MF-300 5 7/8 7 31/32 6 25/32 7MF-400, MF-600 7 9/32 9 21/32 7 11/16 12MF-800, MF-1600 1013/16 20 1/2 9 21/32 35MF2000 1013/16 2519/32 9 21/32 44
Electromechanical Feeder Control
VF Series Electromechanical Feeder Control
Syntron Electromechanical Feeder Controls arestate-of-the-art, solid-state units that can varymaterial flow rate.
Controls for electromechanical feeders are VFseries (variable frequency VFD-type) controls andare optimized for efficient operation. VF seriescontrols feature a full range of adjustable controlwith a 10:1 turn-down ratio. Diagnostic featuresare additional benefits of VF controls.
The VF series controls are CSA approved. Inaddition, a wide range of optional functions areavailable for specific control requirements.
Variable-Frequency Control
Two-Rate Automatic Scale Control
Remote Control
Solid-State Proportional Controls
Variable-frequency controls offer total feed rate regulation throughadjustment of a potentiometer knob or PLC.
Two-Rate Automatic Scale controls are perfect for batch weighing orbagging operations. External scale switches connected to the controlautomatically signal primary fast material flow, secondary dribble flowand instant shut-off at exactly the pre-selected weight.
Solid-state proportional controls permit individual material flow set-tings on multiple feeders for a desired blend of materials. A mastercontrol potentiometer permits simultaneous flow rate regulation of allthe feeders.
Remote controls permit manual adjustment of the feeder flow ratefrom a remote station located at a distance from the feeder.
28
Syntron SG-H mechanical feeder
Syntron SG-H Heavy-DutyMechanical Vibrating Feeders arerugged, heavily constructed units,designed to feed run-of-minematerials, such as large slabs andboulders in the primary crushingsystems of aggregate, ore and coalmining operations.
These extra-heavy-duty servicefeeders are also used for receivingand feeding hot materials, or forinstallations where they must with-stand the impact and wear of heavyand abrasive materials
Dependable operation is assured,even under the most demandingapplication requirements. Steeltroughs have heavy side panels withstiffening ribs and structural steelcross members, welded to make astrong, unitized frame capable ofabsorbing the punishment of highimpacts and heavy loads. Troughsare available in up to 30-foot lengthsand up to 8-foot widths to suit specificmaterial handling requirements.Optional grizzly decks mounted at
Model SG-H 624 heavy-duty Mechanical Vibrating Feeder with 8-footstepped grizzly section.
Model SG-H Vibrator.
Syntron SG-H Heavy-Duty Mechanical FeederExtra-heavy-duty feeders built to meet industrys most demanding applicationrequirements.
Syntron SG-H Heavy-Duty Mechanical Vibrating Feederregulates the feed rate of rock to a gyratory crusher inthis stone plant. The feeder is equipped with a grizzlydeck for rough sizing.
the discharge end of the feederprovide scalping and belt paddingcapabilities.
The heavy-duty, dual shaft, gear-connected drive assembly assurespositive stroke angle to maintainuniform, effective feed.
Four heavy-duty spherical rollerbearings support the two eccentricshafts. Bearings are individuallycartridge-mounted to provide easein maintenance. They are also
separately greased, lubricated andsealed from abrasive and corrosivematerials. Precision helical gearsmounted on tapered bushings drivethe vibrators two eccentric shafts.Gears receive direct oil bath lubri-cation from a reservoir mountedon the outside of the vibrator unit.
The vibrator motor may be operatedat a fixed speed or with an optionalcontrol to vary the feed rate.
29www.fmctechnologies.com/materialhandling
Material Handling Solutions
Dimensions
FeederModel Weight HP A B C D E F G H J
SG516 lb 15,200 30 in 192 34 14 60 78 35 1/4 41 35 1/2 150kg 6,895 mm 4877 864 356 1524 1981 895 1041 902 3810
SG520 lb 18,900 30 in 240 34 14 60 78 35 1/4 41 35 1/2 186kg 8,573 mm 6096 864 356 1524 1981 895 1041 902 4724
SG524 lb 22,800 40 in 288 40 16 60 78 36 1/2 42 1/2 38 1/2 220kg 10,342 mm 7315 1016 406 1524 1981 927 1080 978 5588
SG616 lb 18,300 30 in 192 34 14 72 90 41 1/2 47 35 1/2 150kg 8,301 mm 4877 864 356 1829 2286 1054 1194 902 3810
SG620 lb 21,000 40 in 240 34 14 72 90 42 1/2 48 1/2 38 1/2 186kg 9,526 mm 6096 864 356 1829 2286 1080 1232 978 4724
SG624 lb 25,000 40 in 288 40 16 72 90 42 1/2 48 1/2 38 1/2 220kg 11,340 mm 7315 1016 406 1829 2286 1080 1232 978 5588
SG720 lb 23,300 40 in 240 36 14 84 102 48 1/2 54 1/2 38 1/2 186kg 10,569 mm 6096 914 356 2134 2591 1232 1384 978 4724
SG724 lb 27,800 50 in 288 42 16 84 102 48 1/2 54 1/2 38 1/2 220kg 12,610 mm 7315 1067 406 2134 2591 1232 1384 978 5588
SG820 lb 25,500 40 in 240 40 16 96 114 54 1/2 60 1/2 38 1/2 186kg 11,567 mm 6096 1016 406 2438 2896 1384 1537 978 4724
SG824 lb 30,600 50 in 288 42 16 96 114 54 1/2 60 1/2 38 1/2 220kg 13,880 mm 7315 1067 406 2438 2896 1384 1537 978 5588
Syntron SG-H Heavy-Duty Mechanical Feeder Dimensions
Figure 1. Hopper Design
30
Capacity (tons per hour) x 4800
[W (in) - 4 (in)] x R (ft/min) x D (lb/ft3)
[W (in) - 4 (in)] x R (ft/min) x D (lb/ft3) x d (in)
4800
H (in) = GF x d (in)
Feeder Transition HoppersFeeder capacity depends on the design of the hopper. Material character-istics such as size distribution, shear properties and cohesiveness generallydictate the configuration of feeder transition hoppers. Material flowvelocities vary, depending upon material properties, feeder stroke andoperating speed.
Good transition hopper design optimizes flow rate, resulting in the mosteconomical choice of a feeder. Improperly designed transition hopperswill substantially reduce feeder capacities.
Figure 1 illustrates Ideal and Acceptable Hopper designs.The Ideal Hopperwith a throat (T) to gate height (H) ratio of 0.6 shows a uniform materialflow pattern to the feeder trough. Material at the front and rear of thehopper moves at nearly the same velocity, and the discharge depth (d) isnearly equal to the hopper gate height. The Ideal Hopper design allowsthe most economical feeder to be used.
The Acceptable Hopper design may require a slightly larger feeder thanrequired for the Ideal Hopper design. This is due to the non-uniformflow pattern of material at the rear of the hopper. Material flow velocityis reduced, material depth d is reduced and there is a reduction in feedercapacity. A T/H ratio of 0.6 to 1.0 is generally acceptable. However, whenthe T/H ratio exceeds this range, the material flow patterns distortdrastically and will significantly reduce capacities.
Recommended Designs for Hoppers and Transitions
d (in) =
C (tph) =
T = Throat GF = Gate FactorH = Gate Height Opening R = Flow Rate (ft/min) See ChartC = Capacity W = Feeder Width (inches)d = Depth of Flow at Discharge
Flow Rate - R (ft/min)Suggested Electromagnetic SizeIf material size is -4-in with a trough down slope of 10, use 35 ft/min.If material size is +4-in to -12-in with a trough down slope of 10, use 30 ft/min.If material size is +12-in with a trough down slope of 10, use 25 ft/min.Suggested Electromechanical SizeIf material size is -4-in with a trough down slope of 10, use 55 ft/min.If material size is +4-in to -12-in with a trough down slope of 10, use 50 ft/min.If material size is +12-in with a trough down slope of 10, use 45 ft/min.Feeder down slope usually effects flow rate by 2% per degree. As down slopeincreases flow rate increases. As down slope decreases flow rate decreases.
Ideal Hopper Promotes:
Uniform flow pattern
Maximum capacity
Maximum material velocity
Maximum material depth
Optimized feeder size
Reduced potential for material buildupat inlet
Reduced potential for spillage at backand sides
Reduced material load on feeder
Recommended installation
31www.fmctechnologies.com/materialhandling
Material Handling Solutions
Refer to Figure 2.
1. Rear wall angle steep enough to permit material flow (60 5).
2. Front wall angle just enough to permit material flow (55 5).
3. The throat dimension T for random size material should be aminimum of 2 times the largest particle of material. For particlesthat are nearly the same size (near size), T should be a minimumof 4 times the largest particle size to prevent blockage at thethroat opening. In all cases, the arc A should exceed 2 1/2 timesthe largest particle size.
4. Gate opening H must be a minimum of 2 times the largestparticle of material and should increase proportionally for thedesired capacity. The most economical feeder is selected whenthe throat dimension T is equal to or slightly larger than H/2. IfT is greater than H the flow pattern of the material is disturbed,resulting in non-uniform flow.
5. When adjustable gates are used, the gate must be parallel to thehoppers front wall and must be as close to the front wall as possible.The separation must not exceed 2 inches. The gate should act asan adjustable front wall. Leveling blades and down stream gatesmust not be used. Horizontal cut off gates should be used toperform feeder maintenance and must not be used to regulate flow.
6. The inside width of the opening D (between stationary skirtboards) should allow for a 1-inch clearance between the feedertrough and skirt boards and should be a minimum of 2 1/2 timesthe largest particle size. For near size material the width of Dshould be a minimum of 4 times the largest particle size.
7. The minimum length of the feeder is determined by projectingthe angle of repose for the specific material from the gate point tothe feeder pan and adding approximately 6 inches.
8. The feeder must not contact any adjacent structure but must befree to vibrate. Allowance must be made for a decrease in feederelevation of approximately 2 inches, due to static material load. Inaddition, 1 inch minimum clearance at sides and 1 1/2 inches atbottom and back must be maintained in both loaded andunloaded conditions.
9. The skirts must taper in the direction of flow (diverge fromconveying surface) to prevent material from jamming and causingadditional problems such as spillage and build-up. Skirts must runparallel to trough sides and must be reinforced to resist bulgingoutward against trough.
Recommended Hopper Design and Feeder Selection
Figure 2. Ideal Hopper Illustration
For more information about hopper design,please request our free book or CD ROM,Working with Hoppers. Or, visit ourwebsite, call our Application Specialists at(662) 869-5711 or (800) 356-4899 or emailus at [email protected].
FMC Technologies offers free review and advice onyour hopper and Syntron feeder installation andisolation. Just send us your layout drawings.
32
Recommended installation, contd.
Feeder Mounting and Isolation
Suspension-mounted vibratoryequipment hangs from isolationassemblies attached to the overheadstationary support structure madeby others.
Base-mounted vibratory equipmentsits directly on isolation springsmounted on seats which attach tothe stationary support structuremade by others. The springs can besteel coil, polymeric or pneumatic.
Electromagnetic Feeder Isolation
Electromechanical Dual Spring Isolation
Electromagnetic Trough Post
Electromechanical Single Spring Isolation
For more information about feeder mounting and isolation, ask for our free book Working with Isolation, visitour website, call the Application Specialists at (662) 869-5711 or (800) 356-4899, or email us at [email protected].
FMC Technologies recommends theuse of flexible wire rope for suspension-mounted vibratory equipment. Achart of the proper wire rope sizes isavailable on our website,www.fmcsyntron.com, in our freebook Working with Isolation and inour Service Instruction Manualswhich accompany the shipment ofequipment.
RF Feeder Hanger
Angle Hanger Bail Hanger
Beam Hanger
MF Feeder Hanger
FMC Technologies suggests the useof link bar assemblies when a wirerope suspension is too short to beassembled in accordance with wirerope manufacturer recommendations.Contact FMC Technologies forappropriate link bar dimensions forspecific applications.
Wire Rope Diagram
Link Bar Assembly
Mounting Lug for Wire Rope or Link Bar Isolation
Suspension MountingBase Mounting
FMC Technologies does not recom-mend the use of turnbuckles orrods when mounting vibratoryequipment.
Safety cables are recommended onall suspension-mounted vibratoryequipment.
Electromechanical Feeder Hangers
Electromagnetic Feeder Hangers
Syntron serviceand supportAt FMC Technologies, we understand that good, reliableequipment operating at peak performance is crucial toyour bottom line. Thats why were committed to giving ourcustomers value before, during and after the sale.
Syntron Material Handling Solutions are based on the most rugged, reliable and durable vibratoryequipment available Syntron vibrating feeders, conveyors, screens, parts feeders and bin vibrators. Tobegin with, well help you select the right equipment, considering all the variables of your application inorder to maximize production and reduce costs.
Once youre up and running, our Syntron Services Team will keep you on top and moving ahead. Wereon call at the factory or in the field wherever and whenever you need us for parts, service, inspectionand training.
Dependable equipment is critical to your operation, and your success is critical to our success.At FMC Technologies, your satisfaction is our number one priority. You can rely on us.
www.fmctechnologies.com
Caution: Syntron Heavy-Duty Feeders must be installed, operated and maintained in accordance with accompanying FMCTechnologies Service Instructions. Failure to follow these instructions can result in serious personal injury, property damage or both.FMC Technologies Service Instructions accompany the shipment of equipment. If additional copies are required, they are available,free of charge from Material Handling Solutions, FMC Technologies, Inc., PO Box 1370, Tupelo, MS 38802.
A complete list of authorized distributors and representatives is available on our website, www.fmctechnologies.com.
FMC Technologies, Inc.PO Box 1370Tupelo, MS 38802Tel: 662-869-5711Fax: 662-869-7493Toll Free: 800-356-4898Email: [email protected]
FMC Technologies, Inc.2# Road No. 1Changshu Export Processing ZoneChangshu, Jiangsu, China 215513Tel: 86-0512-52299002Fax: 86-0512-52297228Email: [email protected]
FMC Technologies Chile Ltda.Callao 2970, Office 704Las Condes, Santiago, ChileTel: 56 2 234 4418
56 2 246 4361Fax: 56 2 232 0825Email: [email protected]
FMC Technologies, Inc.479 West 900 NorthNorth Salt Lake, UT 84054Tel: 801-296-9500Fax: 801-296-9601Email: [email protected]
Product Offering Technisys Product Offering Belt Conveyor Idlers Automation and Process Control Idler Rolls SCADA and Process Software Screw Conveyors Variable Frequency Drives Bucket Elevators DC Drives Link-Belt Component Parts Motors Heavy-Duty Vibrating Feeders Harmonic Filters Light-Duty Vibrating Feeders Line Reactors Screening Feeders Power Factor Correction Vibrating Screens Enclosures (Metal, Fiberglass, Plastic) Vibra-Drive Units Sensors Volumetric Feeder Machines Transformers Grizzly Bar Screens Circuit Protective Devices Vibrating Conveyors Industrial Controls Bin Vibrators UL Panel Shop Packing Tables Paper Joggers Syntron Component Parts
2009 FMC Technologies, Inc.Form No. 006-TUP Printed in U.S.Awww.fmctechnologies.com/materialhandling