Top Banner
© Copyright 2012 Xilinx ML605 Board & FMC XM104 Connectivity Card IBERT Design: SMA & SATA Interfaces March 2012 XTP091
52

XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

Jul 04, 2020

Download

Documents

dariahiddleston
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

© Copyright 2012 Xilinx

ML605 Board & FMC XM104 Connectivity Card IBERT Design: SMA & SATA Interfaces

March 2012

XTP091

Page 2: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

© Copyright 2012 Xilinx, Inc. All Rights Reserved. XILINX, the Xilinx logo, the Brand Window and other designated brands included herein are trademarks of Xilinx, Inc. All other trademarks are the property of their respective owners. NOTICE OF DISCLAIMER: The information disclosed to you hereunder (the “Information”) is provided “AS-IS” with no warranty of any kind, express or implied. Xilinx does not assume any liability arising from your use of the Information. You are responsible for obtaining any rights you may require for your use of this Information. Xilinx reserves the right to make changes, at any time, to the Information without notice and at its sole discretion. Xilinx assumes no obligation to correct any errors contained in the Information or to advise you of any corrections or updates. Xilinx expressly disclaims any liability in connection with technical support or assistance that may be provided to you in connection with the Information. XILINX MAKES NO OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED, OR STATUTORY, REGARDING THE INFORMATION, INCLUDING ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT OF THIRD-PARTY RIGHTS.

Revision History

Date Version Description 03/16/12 13.4 Recompiled under 13.4.

10/26/11 13.3 Recompiled under 13.3.

07/06/11 13.2 Recompiled under 13.2.

03/01/11 13.1 Recompiled under 13.1.

12/21/10 12.4 Recompiled under 12.4.

10/05/10 12.3 Recompiled under 12.3.

07/23/10 12.2 Recompiled under 12.2.

Page 3: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 IBERT Overview

Xilinx ML605 & FMC XM104 Boards – Xilinx Virtex-6 FPGA Connectivity Kit

Software Requirements ML605 & FMC XM104: IBERT Setup ML605 & FMC XM104: Running the IBERT Design ML605 & FMC XM104 IBERT Design Creation

– Create IBERT CORE Generator Project – Create IBERT Design – FMC SMA/SATA

ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT ACE Files References

Note: This presentation applies to the ML605 and XM104 Boards

Page 4: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 IBERT Overview

Description – The LogiCORE Integrated Bit Error Ratio (IBERT) core is used to create a

pattern generation and verification design to exercise the Virtex-6 GTX transceivers. A graphical user interface is provided through the IBERT console window of the ChipScope Pro Analyzer

Reference Design IP – LogiCORE IBERT Example Designs

• FMC_HPC (4 Transceivers)

– ChipScope Pro Analyzer • ChipScope Pro Software and Cores User Guide (UG029)

Note: Presentation applies to the ML605 and XM104 Boards

Page 5: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

Xilinx Virtex-6 FPGA Connectivity Kit

FMC XM104 Board

ML605 Board

Note: Presentation applies to the ML605 and XM104 Boards

Page 6: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ISE Software Requirements

Xilinx ISE 13.4 software

Note: Presentation applies to the ML605 and XM104 Boards

Page 7: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ChipScope Pro Software Requirement

Xilinx ChipScope Pro 13.4 software

Note: Presentation applies to the ML605 and XM104 Boards

Page 8: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: IBERT Setup

Page 9: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: IBERT Setup

Unzip ug664.zip file to your C:\ drive – Available through http://www.xilinx.com/v6connkit

Note: Presentation applies to the ML605 and XM104 Boards

Page 10: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: IBERT Setup

SATA Loopback Cable – Included in Connectivity Kit

Note: Presentation applies to the ML605 and XM104 Boards

Page 11: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: IBERT Setup

SMA Cables – Included in Connectivity Kit – 4 cables used with IBERT

Note: Presentation applies to the ML605 and XM104 Boards

Page 12: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: IBERT Setup

The Virtex-6 Connectivity Kit includes the attached FMC XM104 Board

Page 13: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: IBERT Setup

Connect J4 and J10 with an SMA Cable

Note: Presentation applies to the ML605 and XM104 Boards

Page 14: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: IBERT Setup

Connect J6 and J8 with an SMA Cable

Note: Presentation applies to the ML605 and XM104 Boards

Page 15: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: IBERT Setup

Connect J3 and J9 with an SMA Cable

Note: Presentation applies to the ML605 and XM104 Boards

Page 16: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: IBERT Setup

Connect J5 and J7 with an SMA cable

Connect J11 and J12 with the provided SATA loopback cable

Page 17: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: IBERT Setup

Set S2 to 0101XX (X = Don’t care, 1 = on, Position 6 → Position 1) – This selects JTAG

Set S1 to 0XXX (Position 4 → Position 1) – This disables JTAG configuration from the Compact Flash

Note: Presentation applies to the ML605 and XM104 Boards

Page 18: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: IBERT Setup

Connect a USB Type-A to Mini-B cable to the USB JTAG connector on the ML605 board – Connect this cable to your PC – Power on the ML605 Board

Note: Presentation applies to the ML605 and XM104 Boards

Page 19: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: Running the IBERT Design

Page 20: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: Running the IBERT Design

Open ChipScope Pro and click on the Open Cable Button (1) Click OK (2)

1

2

Note: Presentation applies to the ML605 and XM104 Boards

Page 21: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: Running the IBERT Design

Select Device → DEV:1 MyDevice1 (XC6VLX240T) → Configure… Select <Design Path>\ready_for_download\ml605_fmc_xm104_ibert.bit

Note: Presentation applies to the ML605 and XM104 Boards

Page 22: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: Running the IBERT Design

Select File → Open Project… Select <Design Path>\ready_for_download\ml605_fmc_xm104_ibert.cpj

Note: Presentation applies to the ML605 and XM104 Boards

Page 23: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: Running the IBERT Design

Click Yes on this Dialog

Note: Presentation applies to the ML605 and XM104 Boards

Page 24: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: Running the IBERT Design

The line rate is 3.125 Gbps for all four GTXs (1)

1

Note: GTX0_113, GTX1_113 = SATA; GTX2_113, GTX3_113 = SMA

Page 25: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: Running the IBERT Design

TX Diff Output Swing = 590 mV TX Pre-Emphasis = 0.15 dB; TX Post-Emphasis = 0.18 dB

Note: Presentation applies to the ML605 and XM104 Boards

Page 26: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: Running the IBERT Design

TX/RX Data Patterns are set to PRBS 7-bit and 15-bit (1) Click BERT Reset buttons (2)

1

2

Note: Presentation applies to the ML605 and XM104 Boards

Page 27: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: Running the IBERT Design

View the RX Bit Error Count (1) Different GTX Transceivers used as TX & RX partners

Note: Presentation applies to the ML605 and XM104 Boards

2

Page 28: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: IBERT Project Creation

Page 29: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

Create IBERT CORE Generator Project

Open the CORE Generator Start → All Programs → Xilinx ISE Design Suite 13.4 → ISE Design Tools → Tools → CORE Generator

Create a new project; select File → New Project

Note: Presentation applies to the ML605 and XM104 Boards

Page 30: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

Create IBERT CORE Generator Project

Create a project directory: ml605_fmc_xm104_ibert

Note: Presentation applies to the ML605 and XM104 Boards

Page 31: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

Create IBERT CORE Generator Project

Name the project: ml605_fmc_xm104_ibert.cgp

Note: Presentation applies to the ML605 and XM104 Boards

Page 32: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

Create IBERT CORE Generator Project

Select Part Under the Project

options, set the Part (as seen here): – Family: Virtex6 – Device: xc6vlx240t – Package: ff1156 – Speed Grade: -1

Select Generation

Note: Presentation applies to the ML605 and XM104 Boards

Page 33: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

Create IBERT CORE Generator Project

Set the Design Entry to Verilog

Click OK

Note: Presentation applies to the ML605 and XM104 Boards

Page 34: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: IBERT Design Creation

Page 35: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: IBERT Design Creation

Right click on the IBERT Virtex6 GTX (ChipScope Pro - IBERT, Version 2.06a – Select Customize

Note: Presentation applies to the ML605 and XM104 Boards

Page 36: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

Make the following settings: – Component name:

ml605_fmc_xm104_ibert Under the System Clock,

select the following settings: – Use External Clock

source – Frequency: 200 – Location: J9 – Standard: LVDS 25

Click Next

Create IBERT Design

Page 37: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

Make the following settings – Select All GTs – Max Line rate: 3.125

Gbps – The Refclk Frequency:

156.25 MHz – GTX count: 8

Click Next

Create IBERT Design

Page 38: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

Set the following GTX locations to the Custom 1 / 3.125 Gbps Protocol: – QUAD_112 (for

Clocking) – QUAD_113

Click Next

Create IBERT Design

Page 39: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

Connect all GTXs to: – MGTREFCLK0 112 – This connects Bank 113 to

the Bank 112 156.25 MHz GTX Ref Clock

– GTX Ref Clock comes in from the XM104 board on Bank 112 signal FMC_HPC_GBTCLK1_M2C

Click Next

Create IBERT Design

Page 40: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

Click Generate

Create IBERT Design

Page 41: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: IBERT Design Creation

After the IBERT core finishes generating, click Close on the Readme File window

Note: Presentation applies to the ML605 and XM104 Boards

Page 42: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: Generate IBERT ACE Files

Page 43: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: Generate IBERT ACE File

Type these commands in an ISE Design Suite Command Prompt: cd C:\ml605_fmc_xm104_ibert\ready_for_download make_ace.bat

Note: Presentation applies to the ML605 and XM104 Boards

Page 44: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: Using the IBERT ACE File

Use a CompactFlash reader to mount the ML605 CompactFlash as a disk drive

Copy the file, <Design Path>\ready_for_download\ ml605_fmc_xm104_ibert.ace to <CF Drive>\XILINX\cfg6

Note: Presentation applies to the ML605 and XM104 Boards

Page 45: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: Using IBERT ACE Files

Page 46: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: Using IBERT ACE Files

Set S2 to 0101XX (X = Don’t care, 1 = on, Position 6 → Position 1) – This selects JTAG

Set S1 to 1110 (Position 4 → Position 1) – This enables JTAG configuration from the Compact Flash, slot 6 – The ML605 CompactFlash has an ML605 FMC XM104 IBERT ACE file

Note: Presentation applies to the ML605 and XM104 Boards

Page 47: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

ML605 & FMC XM104: Using IBERT ACE Files

Insert CompactFlash into the ML605 and cycle board power Start the ChipScope Pro Analyzer and open the

ml605_fmc_xm104_ibert.cpj project

Note: Presentation applies to the ML605 and XM104 Boards

Page 48: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

References

Page 49: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

References

ChipScope Pro – ChipScope Pro Software and Cores User Guide

http://www.xilinx.com/support/documentation/sw_manuals/ xilinx13_4/chipscope_pro_sw_cores_ug029.pdf

Page 50: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

Documentation

Page 51: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

Documentation

Virtex-6 – Virtex-6 FPGA Family

http://www.xilinx.com/products/silicon-devices/fpga/virtex-6/index.htm

FMC XM104 Documentation – FMC XM104 Connectivity Card

http://www.xilinx.com/products/boards-and-kits/HW-FMC-XM104-G.htm – FMC XM104 Connectivity Card User Guide

http://www.xilinx.com/support/documentation/boards_and_kits/ug536.pdf

Page 52: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT

Documentation

ML605 Documentation – Virtex-6 FPGA ML605 Evaluation Kit

http://www.xilinx.com/products/silicon-devices/fpga/virtex-6/index.htm – ML605 Getting Started Guide

http://www.xilinx.com/support/documentation/boards_and_kits/ug533.pdf – ML605 Hardware User Guide

http://www.xilinx.com/support/documentation/boards_and_kits/ug534.pdf – ML605 Reference Design User Guide

http://www.xilinx.com/support/documentation/boards_and_kits/ug535.pdf