BG 36GroßdrehbohrgerätRotary Drilling Rig
Geräteträger BS 100BBase Carrier BS 100B
Hub / S
troke 9
250 m
m
150
10
00
02000
9500
80
01
34
0
4610
6000
4850
4550 - 4850
1300
3973
7040
9400
13223
24200
26330K
elly
BK
36/4
70/4
/48 (
A=
15,2
5 m
)
1974
BG 36Abmessungen Dimensions
Die BG 36, ein Gerät mit einem Einsatzgewicht von ca. 140 tound einem Drehmoment von 367 kNm dient zur Herstellung von
• verrohrten Bohrungen (Eindrehen des Bohrrohres mit demDrehgetriebe oder mit angebauter Verrohrungsmaschine)
• unverrohrten, flüssigkeitsgestützten Bohrungen
• Bohrungen mit langer Hohlschnecke (SOB) - mit oder ohneKellyverlängerung
• Sonderverfahren wie Doppelkopfbohren (“verrohrtes SOB-Bohren”), Verdrängerbohrungen, Mixed-in-place Verfahren(SMW)
Die Standardausrüstung der BG 36 umfasst:
• Neigungsmessung in x/y Richtung mit autom. Vertikalstellungdes Mastes
• Tiefen- und Lastmessung der Hauptwinde
• Seilspannzylinder für Seil des Vorschubwinde
• Schnellkupplungen am Drehgetriebe
• Aufbau des Gerätes ohne Hilfseinrichtungen
The rotary drilling rig BG 36 has an operating weight of approx.140 to and a torque of 367 kNm. It is ideally suited forconstructing:
• cased boreholes (installation of casing by rotary drive oroptionally by hydraulic oscillator – both are powered by thedrilling rig)
• uncased deep boreholes that are stabilised by drilling fluid
• boreholes with long hollow stem augers (CFA system), with orwithout kelly extensions
• special drilling systems, such as twin-head drilling (“casedCFA system”), displacement piles, soil-mixing-wall system(SMW)
The BG 36 features the following equipment as standard:
• mast inclination measuring system x/y direction c/wautomatic mast adjustment
• depth and load sensing device on main winch
• hydraulic rope tensioning cylinder for rope of crowd winch
• quick couplings for hydraulic hoses at the rotary drive
• rig is self-erecting
Hub / S
troke 6
500 m
m
708
10000
2000
95
00
13
40
4650
6000
4850
4550 - 4850
1300
4531
7040
11031
24200
26330
7208
Kelly
BK
36/4
70/4
/48 (
A=
15,2
5 m
)
2770
Windenvorschub Crowd Winch
Zylindervorschub Crowd Cylinder
BG 36 BS 100B
Technische Daten Technical Data
Drehgetriebe KDK 367 S Rotary Drive KDK 367 S
Zylindervorschub Windenvorschub
Crowd Cylinder Crowd Winch
Gesamthöhe Overall height 26.330 mm 26.330 mm
Einsatzgewicht ca. Operating weight (approx.) 139.000 kg 140.000 kg(mit BK36/470/4/48) (with kelly BK36/470/4/48)
Drehantrieb Rotary Drive KDK 367 S KDK 367 S
Drehmoment (1. Gang) Torque (1st gear) 367 kNm 367 kNm
Drehzahl max. (1. Gang) Speed of rotation max. (1st gear) 23 U/min (RPM) 23 U/min (RPM)
Drehmoment (2. Gang) Torque 2nd gear 167 kNm 167 kNm
Drehzahl max. (2. Gang) Speed of rotation max. (2nd gear) 48 U/min (RPM) 48 U/min (RPM)
Vorschubsystem Crowd System
Druck / Zug Crowd pressure / pull 250 / 430 kN 400 / 400 kN
Hub (Kellysystem) Stroke height (kelly system) 6.500 mm 9.250 mm
Hub (SOB-System) Stroke height (CFA system) 18.350 mm 18.700 mm
Geschwindigkeit (ab/auf) Crowd speed (down/up) 3,5 / 7,0 m/min 8,0 / 8,0 m/min
Schnellgang (ab/auf) Fast crowd speed (down/up) 16 / 16 m/min 26,0 / 26,0 m/min
Hauptwinde Main Winch
LDC Winde (Windenklasse M6 / L3 / T5) LDC winch (winch classification M6 / L3 / T5)
Zugkraft (1. Lage) Single line pull ( 1st layer) 300 kN 300 kN
Seildurchmesser / Länge Rope diameter / Length 36 mm / 95 m 36 mm / 95 m
Windengeschwindigkeit Line speed max. 57 m/min 57 m/min
Hilfswinde Auxiliary Winch
ohne Freifall No free-fall facility
Zugkraft (1. Lage) Single line pull (1st layer) 130 kN 130 kN
Seildurchmesser / Länge Rope diameter / Length 22 mm / 60 m 22 mm / 60 m
Windengeschwindigkeit Line speed max. 60 m/min 60 m/min
Mastneigung Mast inclination
nach hinten / vorne / quer Backward / forward / lateral 15° / 5° / ± 5° 15° / 5° / ± 5°
137
367,7
8,7 23
167
66
18 48,6
0
0
M [kNm]
n [RPM]10 20 30 40 50
100
200
300
400
750
14
53
23
0
24
00
16
25
15
95
90
0
1300
800
1340
4610
6000
4850
4550 - 4850
1300
1340
4610
6000
4850
4550 - 4850
1300
540
30550
22673
19940
60
00
Sch
ne
cke
nlä
ng
e / a
ug
er
len
gth
19
40
0 m
m
Sch
ne
cke
nlä
ng
e / a
ug
er
len
gth
19
40
0 m
m
54000
22673
19940
BG 36 BS 100B
SOB - Verfahren CFA Drilling System
Vorschubsystem Zylindervorschub WindenvorschubCrowd system Crowd Cylinder Crowd Winch
Kellyverlängerung -- 6,0 m -- 6,0 mKelly extension
Bohrtiefe mit Schneckenputzer 16,50 m 22,50 m 16,90 m 22,90 mDrilling depth with auger cleaner
Bohrtiefe ohne Schneckenputzer und ohne Podest 17,70 m 23,70 m 18,10 m 24,10 mDrilling depth without auger cleaner and safety cage
Max. Bohrdurchmesser 1.200 mm 1.200 mm 1.200 mm 1.200 mmMax. drilling diameter
Max. Zugkraft (eingeschert) 600 kN 600 kN 400 kN 400 kNMax. extraction force (sheaved) (1.000 kN)* (1.000 kN)*
Max. Vorschubkraft Gewicht KDK + Schnecke 400 kN + EigengewichtMax. crowd force Weight of rotary drive + auger 400 kN + self weight
Schneckenlänge L 19,00 m 19,00 m 19,40 m 19,40 mContinuous flight auger length L
* Vorschubwinde + Hauptwinde (eingeschert)* Crowd winch + main winch (sheaved)
hydraulische Mastabstützung erforderlichhydraulic mast support required
Zeichnung für WindenvorschubDrawing for crowd winch module
Zubehör:
- Hydraulische Schneckenführung
- Betonierleitung am Mast
- Betonierleitungsanschluss amDrehgetriebe
Options:
- Hydraulically operated augerguide
- Fixed concrete pipe on the mast
- Concrete pipe connection on rotary drive
BG 36 BS 100B
Bohrdaten (Kellysystem) Drilling Data (Kelly System)
0
26266
KDK 367S
KDK 232S
16350
1300
4550 4610
6000
4850
550
Schlit
tenhub / s
troke o
f sle
dge 1
5550 m
m
Bemerkungen zur Bohrdatenermittlungsiehe „Kellystangen 905.518.1“
For further details on the acquisition ofdrilling data please refer to “Kelly Bars 905.518.1”
3973 W
17
00
A
B
T
Hw
24200
4531 Z
Doppelkopfverfahren Twin Rotary Drive System
Drehantrieb für Schnecke Rotary drive for auger KDK 232S
Drehantrieb für Bohrrohr Rotary drive for casing KDK 367S
Durchmesser (max.) Diameter (max.) 880 mm
Bohrtiefe Drilling depth 15,00 m(mit 4 m Verlängerung) (with 4 m extension) (17,00 m)
Zugkraft (max.) Extraction force (max.) 1000 kN
Vertikale Relativverschiebung Vertical relative movement der Drehantriebe between both rotary drives 550 mm
Drehantriebe sind Rotary drives cannot be nicht entkoppelbar moved independently
Einsatzgewicht (ca.) Operating weight (approx.) 155.000 kg
Systemvoraussetzungen: System requirements:- Seilvorschub - Crowd winch- Hydraulische Mastabstützung - Hydraulic mast support
Unverrohrt Uncased 2.500 mm 2.300 mm
Verrohrt Cased 2.200 mm 2.000 mm
Bohrdurchmesser Drilling Diameter
Ohne BV Without casing oscillator Hw – 0,5 m Hw – 0,5 m
Mit BV With casing oscillator Hw – 1,5 m Hw – 1,5 m
Bohrrohrlängen Length of Casing Sections
Zylindervorschub WindenvorschubCrowd Cylinder Crowd Winch
Kellytyp A (m) B (m) Gewicht Hw (m) T (m) Hw (m) T (m)Type of kelly bar Weight (kg)
BK36/470/3/30 13,25 33,16 7.750 7,20 30,30 9,05 30,90
BK36/470/3/36 15,25 39,16 8.650 7,05 36,30 7,05 36,90
BK36/470/3/45 18,25 48,16 10.000 4,05 45,30 4,05 45,90
BK36/470/4/40 13,25 42,79 10.300 7,20 39,90 9,05 40,50
BK36/470/4/48 15,25 50,79 11.800 7,05 47,90 7,05 48,50
BK36/470/4/56 17,25 58,79 13.200 5,05 55,90 5,05 56,50
BK36/470/4/64 19,25 66,79 14.600 3,05 63,90 3,05 64,50
BK36/470/4/72 21,25 74,79 16.000 1,05 71,90 1,05 72,50
BK36/470/4/80* 23,25 82,79 17.500 -- -- 1,05 80,50
* mit Mastzwischenstück 4 m (nur Windenvorschub) with intermediate mast section 4 m (crowd winch only)
Bohrtiefen Drilling Depths
BG 36 BS 100B
Geräteträger BS 100B Base Carrier BS 100B
Motor Power Unit CAT C 15
Nennleistung ISO 3046-1 Rated output ISO 3046-1 420 kW @ 1.800 U/min (RPM)
Motor spezifiziert nach Abgasnorm Engine conforming toEEC 97/68EC Stufe 2 und EEC 97/68EC Stage 2 and EPA/CARB TIER II EPA/CARB TIER II
Hydrauliksystem Hydraulic System Dreikreisbohrhydraulik3-circuit System for drilling
Hydraulikdruck Hydraulic pressure 300 bar
Fördermengen (Hauptkreise + Hilfskreis) Flow rates (main circuits + auxiliary circuit) 3 x 300 l/min + 1 x 120 l/min
Tankinhalt Tank capacity 900 l
Unterwagen Undercarriage UW 130
Teleskopfahrwerk Retractable crawlers Typ B 8B
Spurweite Track width 2.700 / 4.000 mm
Fahrwerksbreite Overall width of crawlers 3.700 / 5.000 mm
3-Steg Bodenplatten Triple bar track shoes 1.000 mm
Fahrwerkslänge Overall length of crawler units 6.000 mm
Zugkraft Traction force 787 kN
Fahrgeschwindigkeit Travel speed 1,1 km/h
Varianten – Zusatzeinrichtungen Optional Equipment
Anschlüsse für Verrohrungsmaschine (max. BV 2000-07) Connections for casing oscillator (BV 2000-07)
Bohrachse 1.550 mm (mit eigenem Grundschlitten) Drill axis 1.550 mm (with new base sledge)
Drehgetriebe mit Schleudergang Rotary drive with spin-off facility
Mastzwischenstück 3 m (anstatt 2 m Standard) Mast intermediate section 3 m (replacing 2 m standard section)
Mastzwischenstück 4 m (anstatt 2 m Standard) Mast intermediate section 4 m (replacing 2 m section) nur Windenvorschub for crowd winch
Vorschubzylinder 7,65 m Crowd cylinder 7,65 m
Zentralschmierung Central lubrication
Hauptwinde mit Freifalleinrichtung Main winch with free-fall facility
Überwachungskamera für Hauptwinde Surveillance camera for main winch
Seilkraftmessung Hilfswinde Line pull indicator for auxiliary winch
Tiefenmessung Vorschubwinde Depth control on crowd winch
Mastabstützung hydraulisch Hydraulic mast support module
Schneckenputzer Auger cleaner
Automatikdrehteller Automatic casing drive adapter
Drehmomentenwandler (zum Einbau von Bohrrohren) Torque converter (for installing casings)
Kompressor Air compressor
Generator Electric generator
Kellyführung am Kellykopf (für Seilvorschub) Kelly guide to mast (for crowd winch)
Aufstiegsleiter mit Podest Mast access ladder
Elektronisches Steuerungs- und Kontrollsystem B-TRONIC electronic monitoring and control system forB-TRONIC zum- Überwachen und Steuern der Bohrfunktionen - Monitoring and control of drilling operations- Erfassen Betriebsdaten - Acquisition of operating data- Visualisierung der Kellyposition - Visualisation of kelly position-Fernübertragung der Betriebsdaten - Remote data transmission with telemetry
BG 36 BS 100B
Transportdaten Transport Data
Zylindervorschub WindenvorschubCrowd Cylinder Crowd Winch
Geräteträger mit Mastunterteil, Winden, Gegengewicht, Nackenzylinder 82.000 85.000Base carrier with lower mast, winches, counterweight, backstay cylinders
Mastoberteil, Mastkopf (+ Vorschubzylinder) 9.000 7.000Upper mast, mast head (+ crowd cylinder)
Drehgetriebe (ohne Grundschlitten) 7.500 7.500Rotary drive (without base sledge)
Gegengewicht 11.500 + 6.500 + 11.500 + 6.500 + Counterweight 6.000 6.000
Transportbreite 3.700 mm 3.700 mmTransport width
Transporthöhe 3.600 mm 3.600 mmTransport height
6 to 11,5 to
250 800
16
50
16
50
13
40
36
00
6000
35
0
14450 4650
34
50
13
40
6000
6,5 to
32
50
34
50
35
0
19100
14450
32
50
12502
10000
18830
14
00
4380
36
00
400
16
50
12300
10000
14
00
Gewichtsangaben sind ca.Werte in kgZusatzausrüstungen (Optionen)können das Gesamtgewichtverändern
Weights shown are approximatevalues only and given in kgOptional equipment may changethe overall weight
BAUER Maschinen GmbHWittelsbacherstraße 5D-86529 SchrobenhausenTel. +49 (0)82 52/97-0Fax +49 (0)82 52/97-1135e-mail: [email protected]
Technical Specifications are subject to change withoutprior notice and incurring responsibility for machinespreviously sold. The shown machines may have specialequipment. Technical data do not consider power losses.Error and misprints reserved.
Technische Änderungen ohne Vorankündigung undVerpflichtung gegenüber früher gelieferten Geräten. Die abgebildeten Geräte können Sonderausstattungenhaben. Technische Daten ohne Berücksichtigung desWirkungsgrades.Irrtum und Druckfehler vorbehalten. 905.562.1 4/03
Kellybohren, verrohren mit KDK
Drilling with kelly, installation of
casing by rotary drive
Kellybohren mit Verrohrungsmaschine
Drilling with kelly, installation of
casing by casing oscillator
Doppelkopfbohren
Drilling with twin rotary drive
Bohren mit langer Hohlschnecke (SOB)
Drilling with continuous flight auger (CFA)
Soil Mixing System (SMW) Verdrängerbohren
Displacement auger system
Bohrverfahren Drilling Systems