-
SANY Rotary Drilling Rig With CFA System
The copyright is reserved by SANY, and any content is forbidden
to be used for other purpose without written permission of SANY.
China print no.: BZSRX0303EN(10-09)-SR150M/200M/250M/280M
Add: SANY Industrial Region, Beiqing Road, Huilongguan,
Changping District, Beijing, P.R. China
Zip code: 102206
Fax: 0086-10-80727043
Customer support: 0086-10-80727122
Website: http//:www.bjsany.com
Materials and specifications are subject to change without
notice. Featured machines in photos may include additional
equipment.
Final data and configuration are according to contract or real
rig. The price varies according to the configuration.
-
SANY rotary drilling rig with CFA system blends productivity and
durability to give you the best return on your investment.
Machine
Chassis Page 9
Engine Page9
Control System Page10
SR150 M Technical Data Page 1-2
Hydraulic System Page10
Driving Mechanism Page 11
Kelly Bar/CFA Page 12
Cab Page 14
Working Equipment Optional Page 13 Customer Support Page 16
Drilling Tools Page 12
Convenient Maintenance Page 15
Safety Page 15
SR200M Technical Data Page 3-4
SR250M Technical Data Page 5-6
SR280M Technical Data Page 7-8
-
SR150M Technical Data
Multi-function: drilling with Continuous Flight Auger (max.
drilling dia. 750mm and max. drilling depth 17m) or with
Kelly system (max. drilling dia. 1500mm and max. drilling
depth 46m) after replacing related components.
Dry drilling without slurry circulation to facilitate drilling
with
fewer accessories and to avoid pollution.
The rig owns a high drilling efficiency due to the rotary
drive
with large output torque.
Auger cleaner to reduce labor intensity.
Cummins QSB6.7-190 (EU / EPA Tier 3 III) or Isuzu CC-
6BG1TRP(EU stage II/EPA Tier 2) stage intercooler diesel
engine owns the functions of load-sensing and output power
auto-adjusting; auto accelerating/decelerating function,
fuel
consumption can be reduced by 5-10%.
Embedded system based on work mechanism controller and
perfect CAN-BUS technique to take full charge of whole
machine monitoring.
Hydraulic pump, motor, valve and joint are introduced in
well-known brands to ensure high reliability of system; main
oil circuit adopts advanced negative control technology and
auxiliary oil circuit adopts load sensitive control system,
which assures the optimal match of output power and load
under all kinds of operating conditions.
Meet the standards of city construction law due to its low
noise, slight vibration and little pollution during
drilling.
CFA drilling system
Max. drilling depth
Max. drilling dia.
Max. extraction force
Max. output torque
Kelly drilling system
Max. drilling depth
Max. drilling dia.
Drilling speed
Max. output torque
Crowd cylinder max. push
Stroke
Main Winch
Max. line pull (1st layer)
Max. line speed
Rope dia.
Auxiliary Winch
Max. line pull (1st layer)
Max. line speed
Rope dia.
Mast Inclination
Forward
CFA backward
Sideward
Whole Machine
System pressure
Pilot pressure
Traction force
Transport width
Operating width
Transport height
Transport length
Work weight
17 m (55.8 ft)
750 mm ( 26)
320 kN (71939 lbf)
150 kN.m (110633 lbf.ft)
46 m (151 ft)
1500 mm (411)
7-40 rpm
150 kN.m (110633 lbf.ft)
150 kN (33721 lbf)
4250 mm (1311)
160 kN (35970 lbf)
70 m/min (2.6 mph)
28 mm (1.1 in)
60 kN (13490 lbf)
60 m/min (2.2 mph)
14 mm (0.55 in)
5
15
5
34.3 MPa (4975 psi)
4 MPa (580 psi)
210 kN (47210 lbf)
3100 mm (10 2)
4100 mm (13 5)
3305 mm (10 10)
12475 mm (40 11)
41 t ( 40.4 long ton)
Engine
Model
Intake form
Fuel
Emission regulation
No. of cylinder - borestroke
Displacement
Rated power
Max. torque
Fuel consumption ( 100% output)
Cummins
QSB6.7-190
4-stroke water-cooled overhead valve type
Direct injection
Turbocharger; inter cooler
light oil (JIS Type 2)
EU stage III / EPA Tier 3
6-107124 mm / 6-4.214.88 in
6.7 L / 409 in
142 kW(190 hp)@2200 rpm
931 N.m(687 lbf.ft)@1400 rpm
221 g/(kW.h) 0.363 lbs/(hp.h)
Style
SR150M
31002' 4"
700
4100
10' 2"-13' 5"
4455
14' 7"
SR150M
SR150M
3100 10
' 2"
1 SANY SR150M/200M/250M/280M Rotary Drilling Rig with CFA System
2Quality Changes the WorldNote: Isuzu CC-6BG1TRP engine is
optional.
-
CFA drilling system
Max. drilling depth
Max. drilling dia.
Max. extraction force
Max. output torque
Main winch max. line pull (1st layer)
Kelly drilling system
Max. drilling depth
Max. drilling dia.
Drilling speed
Max. output torque
Main winch max. line pull (1st layer)
Crowd cylinder max. push
Crowd cylinder max. pull
Stroke
Main Winch
Max. line speed
Rope dia.
Auxiliary Winch
Max. line pull (1st layer)
Max. line speed
Rope dia.
Mast Inclination
Forward
CFA backwardSideward
20 m (65.6 ft))
800 mm (27)
400 kN (89923 lbf)
150 kN.m (110633 lbf.ft)
150 kN (33721 lbf)
60 m (197 ft)
1800 mm (5 11)
7-26 rpm
200 kN.m (147511 lbf.ft)
200 kN (44962 lbf)
150 kN (33721 lbf)
160 kN (35969 lbf)
4300 mm (14 1)
72 m/min (2.7 mph)
28 mm (1.1 in)
76 kN (17085 lbf)
79 m/min (2.9 mph)
20 mm (0.8 in)
5
15
5
Whole Machine
System pressure
Pilot pressure
Traction force
Transport width
Operating width
Transport height
Transport length
Max. Weight (with standard CFA)
34.3 MPa (4975 psi)
4 MPa (580 psi)
360 kN (80931 lbf)
3000 mm (9 10)
4000 mm (13 1)
3368 mm (11 1)
14233 mm (46 8)
60 t (66 sh.ton)
Engine
Model
Style
Intake form
Fuel
Emission regulation
No. of cylinder - borestroke
Displacement
Compression ratio
Rated power
Max. torque
Fuel consumption ( 100% output)
Isuzu
AA-6HK1XQP
4-stroke water-cooled overhead valve; direct injection
Turbocharger; inter cooler
light oil (JIS Type 2)
EU stage II / EPA Tier 2
6-115125 mm / 6-4.54.9 in
7.79 L / 475 in
17.3:1
193.5 kW(259 hp)@2000 rpm
872.8 N.m (644 lbf.ft)@1700 rpm
236.6 g/(kW.h) 0.390 lbs/(hp.h)
14233mm46 8
5487mm18
33
68
mm
11
1
6790mm22 3
14233mm46 8
5487mm18
6790mm22 3
33
68
mm
11
1
10
30
mm
3 5
3000-4000mm9 10-13 1
700mm2 4
17
99
mm
5 1
1
19
96
1m
m6
5 6
700mm2 4
10
30
mm
3 5
3000-4000mm9 10-13 1
26
08
1m
m8
5 7
6
00
0m
m1
9 8
1
72
45
mm
56
7
3 SANY SR150/200C/250 Rotary Drilling Rig with CFA System
4Quality Changes the World
SR200M Technical DataMulti-function: drilling with Continuous
Flight Auger (max. drilling dia. 800mm and max. drilling depth 20m)
or with
Kelly system (max. drilling dia. 1800mm and max.
drilling depth 60m) after replacing related components.
Dry drilling without slurry circulation to facilitate drilling
with
fewer accessories and to avoid pollution.
The rig owns a high drilling efficiency due to the rotary
drive with large output torque.
Auger cleaner to reduce labor intensity.
Isuzu AA-6HK1XQP intercooler diesel engine owns the
functions of load-sensing and output power auto-
adjusting; auto accelerating/decelerating function, fuel
consumption can be reduced by 5-10%.
Embedded system based on work mechanism controller
and perfect CAN-BUS technique to take full charge of
whole machine monitoring.
Hydraulic pump, motor, valve and joint are introduced in
well-known brands to ensure high reliability of system;
main oil circuit adopts advanced negative control
technology and auxiliary oil circuit adopts load sensitive
control system, which assures the optimal match of output
power and load under all kinds of operating conditions.
Meet the standards of city construction law due to its low
noise, slight vibration and little pollution during
drilling.
-
CFA drilling system
Max. drilling depth
Max. drilling dia.
Max. extraction force
Max. output torque
Kelly drilling system
Max. drilling depth
Max. drilling dia.
Drilling speed
Max. output torque
Crowd winch max. push
Crowd winch rope dia.
Stroke
Main Winch
Max. line pull (1st layer)
Max. line speed
Rope dia.
Auxiliary Winch
Max. line pull (1st layer)
Max. line speed
Rope dia.
Mast Inclination
Forward
CFA backwardSideward
Whole Machine
System pressure
Pilot pressure
Traction force
Work weight (with standard CFA)
23 m (75.4 ft)
800 mm ( 27)
700 kN (157366 lbf)
150 kN.m (110633 lbf.ft)
70 m (230 ft)
2500 mm (82)
6-30 rpm
260 kN.m (191764 lbf.ft)
300 kN (67443 lbf)
24 mm (0.94 in)
10000 mm (3210)
240 kN (53954 lbf)
63 m/min (2.3 mph)
28 mm (1.1 in)
110 kN (24729 lbf)
70 m/min (2.6 mph)
20 mm (0.8 in)
5
15
6
34.3 MPa (4975 psi)
4 MPa (580 psi)
510 kN (114653 lbf)
70/74 t (68.9/72.8 long ton)
SR250M
SR250M
SR250M
SR250M Technical Data
6Quality Changes the World5 SANY SR150M/200M/250M/280M Rotary
Drilling Rig with CFA System
Multi-function: drilling with Continuous Flight Auger (max.
Drilling dia. 800mm
and max. drilling depth 25.5m) or with Kelly system (max.
drilling dia. 2500mm,
max. drilling depth 76m, feed by crowd winch, and it can drill
with a casing
oscillator) after replacing related components.
Dry drilling without slurry circulation to facilitate drilling
with fewer accessories
and to avoid pollution.
The rig owns a high drilling efficiency due to the rotary drive
with large output
torque.
Auger cleaner to reduce labor intensity.
The adoption of truss type mast enables greater bending
resistance and
compressive resistance.
When drill with Kelly system, the rig can drill in rock within
drillability
-
SANY SR150M/200M/250M/280M Rotary Drilling Rig with CFA
System
CFA and Kelly can be respectively realized via
replacement of working equipment; casing oscillator is
optional.
The unique truss type anti-vibration mast optimizes the
system stability by frequency resonance technology. It has
more bending resistance, compressive resistance and
vibration absorbing ability.
The big torque rotary drive with special lubricating system
makes sure that it can work in high-temperature
environment, which is available in three drilling modes:
standard, low speed and big torque, or high speed and
small torque.
Special pulley yoke raises main winch pull notably.
The main winch has functions of touch-bottom protection
and priority control; fast line speed is optional.
Auger has the features of reliable connection, large
rigidity,
good wearing resistance and fine sealing; the unique
double-layer core tube design not only increases auger
strength, also guarantees smooth concrete conveyance,
thereby enhancing construction efficiency.
Auger extension can increase hole depth on the premise
of non-add auger.
The hydraulic auger cleaner can clean the auger
effectively to reduce labor cost.
The bottom arm equipment can stabilize the long auger
during operation to ensure the exact hole position and
verticality.
The support system in the mast end guarantees the whole
machine stability during operation.
The valve at the bottom of auger can prevent drilling bits
entering concrete pipe during operation. When drilling pipe
is taken out and concrete grout is injected, the valve will
be
opened.
The rotary drive multi-purpose key bushing facilitates the
replacement of Kelly bar and CFA; the removable and
symmetrical key structure doubles key's service life.
Low vibration, low noise and low pollution to meet the high
standards of city pile foundation construction.
SR280M Technical Data
CFA drilling system
Max. drilling depth
Max. drilling dia.
Max. extraction force
Max. output torque
Kelly drilling system
Max. drilling depth
Max. drilling dia.
Drilling speed
Max. output torque
Crowd winch max. push
Crowd winch rope dia.
Stroke
Main Winch
Max. line pull (1st layer)
Max. line speed
Rope dia.
Auxiliary Winch
Max. line pull (1st layer)
Max. line speed
Rope dia.
Mast Inclination
Forward
CFA backwardSideward
Whole Machine
System pressure
Pilot pressure
Traction force
Work weight (with standard CFA)
24 m (78.7 )
800 mm ( 27)
800 kN (178947lbf)
150 kN.m (110633 lbf.ft)
84 m (276 )
2500 mm (82)
6-30 rpm
285 kN.m (210394 lbf.ft)
350 kN (78683 lbf)
28 mm (1.1 in)
10000 mm (3210)
285 kN (210394 lbf)
63 m/min (2.3 mph)
32 mm ( )
110 kN (24729 lbf)
70 m/min (2.6 mph)
20 mm (0.8 in)
5
15
6
ft
ft
1.3 in
34.3 MPa (4975 psi)
4 MPa (580 psi)
510 kN (114653 lbf)
72/76 t (70.9/74.8 long ton)
S type 2)
SR280M
SR280M
SR280M
8Quality Changes the World7
-
Chassis is the installation base to the upper structure of the
rig,
it is used to install and support crawler travel mechanism, and
there
is hydraulic cylinder inside it. The centre revolving joint of
hydraulic
system transfers working pressure oil of hydraulic system of
upper
machine to the crawler travel mechanism and crawler
telescopic
mechanism, and by the telescopic movement of hydraulic
cylinder,
the extension and retraction of crawler travel mechanism is
realized.
This function can make the rig broaden the distance of
crawlers,
which greatly improves the rig operating stability; while
transporting,
crawlers would be retracted to meet the requirement of
highway
traffic regulations. Hydraulic drive and telescopic crawler
mechanism
improve the reliability and stability of the rig during
operation.
Hydraulic drive and telescopic crawler structure improve the
reliability and stability of the rig in construction.
Chassis
9 SANY SR150M/200M/250M/280M Rotary Drilling Rig with CFA
System
The rig Adopting international advanced super strength, large
torque, directly spraying, turbocharged, intercooling power system
engine.
High efficient turbocharged function improves the performance
and power of the engine; special compressor enables the machine to
work on
plateau; electric injection supplies precise spray oil volume,
energy-saving and lower consumption; high efficient combustion
chamber realizes
high power output with low oil consumption, low discharge and
low noise.
10
Rig model
Chassis model
Chassis weightEngine modelCrawler length
Track shoe width
Crawler height
Overall width
SR150M
SY230RC SERIES
19.5 t (19.2 long ton)
QSB6.7-190
4450 mm (14 7)
700 mm (2 4)
940 mm (3 1)
4100 mm (13 5)
SR200M
SY310RC
30 t (29.5 long ton)
AA-6HK1XQP
5487 mm (18 )
700 mm (2 4)
1030 mm (3 5)
4000 mm (13 1)
CAT330D/336D
35.5 t (35 long ton)
C9 STH/HHP
5464 mm (17 11)
800 mm (2 7)
1030 mm (3 5)
4300 mm (14 1)
SY420R
39.8 t (39.2 long ton)
QSL9-C325
5911 mm (19 5)
800 mm (2 7)
1060 mm (3 6)
4490 mm (14 9)
SR250M/280M
ISUZU AA-6HK1XQP CATERPILLAR C9 STH/HHP
Based on the CAN-BUS electronic control system, the machine
realizes intellectual control of engine monitoring, machine action
control,
virtual Instrument display, malfunction check, alarming and
information display. The key parts are all world-famous brands
products.
Adopting stable, reliable and high-performance hydraulic system
of international brands.
Hydraulic System
Control System
Main oil circuit adopts advanced negative flow control
technology;
consequently, flow supply according to requirement is realized.
Based on it,
constant power and electricity power override control make the
best use of the
engine power.
Auxiliary oil circuit adopts load sensitive control system which
is welcomed by
the international engineering machinery industry. The core parts
as load-sensing
pump and multi-way directional valve with load compensation make
the output
power and all kinds of operating conditions achieve optimal
match, which mostly
improves system transmission efficiency.
The rig adopts pilot control system. Reliable pilot logic valve
controls all
actions of the rig. Pilot control is flexible, safe, comfortable
and precise, which
greatly improves the operational performance, flexibility,
safety and comfort, and
fully shows the integration of
man-mechanics-electronics-hydraulics.Motor of rotary drive Motor +
gearbox of winch
Control module Pressure sensorInclinometer
Matching the constant power of hydraulic system perfectly, the
whole machine performs the maximum working efficiency.
Combination of electro-hydraulic control
Be in charge of compound control and check/protection of
the engine, hydraulic pump, hydraulic valve and the rig fully
and
duly. The electrical equipment checks the operating
conditions,
and drives the hydraulic and mechanical equipment according
to
the requirement of construction processing.
Man-machine interactive technology
The friendly interface displays the machine operating
conditions real-timely, which is directly related to the
operating
performance of the rig, and more information would help the
operator to know the operating conditions of the rig and make
the
correct judgment and adjustment. The choice of working
state,
setting of working parameters, online adjustment of input
and
output signals, system calibration and equipment malfunction
check and inquiry are finished by pressing buttons. The system
is
safe and reliable with steady performance, friendly
interface,
convenient and intellectual operation.
Automatic verticality adjusting control technology
The rig automatic verticality adjusting function is
developed
self-reliantly. The function module is integrated inside the
main
control system, which greatly improves the combination of
control
precision, cost and the main control system of the rig.
Mast automatic erecting and lying control technology
The erecting/lying and lateral inclination of the mast are
adjusted automatically according to the feedback of the mast
angle.
With unattended condition, the mast can also be lifted and
adjusted
automatically to verticality, and the speed and synchronism of
the
mast automatic erecting and lying can be changed by
parameters
setting.
Engine pump power control technique
Closed-loop control is adopted. While working, the hydraulic
pump absorption power is adjusted automatically by control
system
according to the change of the engine power and load to achieve
the
optimal match of the engine power and the pump power. Graded
power control technology is adopted to set the engine working
ability
according to the specific operating conditions, which reduces
the
work intensity and ensures steady operation of the engine on
economical point.
Fault intelligent diagnosis technology
The parameters of engine, hydraulic system and control
system are cycled checked by fault diagnosis device to judge
whether the rig works normally or not. When a fault occurs, the
rig
will be shut down timely and the code of fault will be displayed
to
avoid more severe damage.
Relay module
-
11 SANY SR150M/200M/250M/280M Rotary Drilling Rig with CFA
System
Including rotary drive, main / auxiliary winch, parallelogram
mechanism, mast, etc.
Driving Mechanism
Outer dia.
377mm/1 3
400mm/1 4
440mm/1 5
600mm/2
440mm/1 5
600mm/2
508mm/2
600mm/2
Nominal torque
150 kN.m/110633 lbf.ft
150 kN.m/110633 lbf.ft
200 kN.m/147511 lbf.ft
150 kN.m/110633 lbf.ft
250 kN.m/184556 lbf.ft
150 kN.m/184556 lbf.ft
280kN.m/206515 lbf.ft
150 kN.m/184556 lbf.ft
Type
Friction Kelly bar
CFA
Friction Kelly bar
CFA
Friction Kelly bar
CFA
Friction Kelly bar
CFA
No. of tubeslength per rod
412 m / 439 4
34.2m+1.8m/313 9+5 11
513 m / 542 7
35.25m+1.495m/317 3+4 11
514 m / 545 11
36.3m+1.3m/320 8+4 3
516 m / 552 6
36.3m+1.3m/320 8+4 3
Note
SR150M Kelly
SR150M CFA
SR200M Kelly
SR200M CFA
SR250M Kelly
SR250M CFA
SR280M Kelly
SR280M CFA
Drilling Tools
Kelly Bar/CFA
12
Rotary drive stiffeners to increase its torsion and bending
resistance. The
Super drilling torque; power is much stronger with double motor
and mast is articulated and folded in 3 sections, which is
double gerabox; special hub built-in detachable key patent and
convenient for transportation. SR250M/280M adopts truss
pulley yoke sliding plate abrasion compensation technology are
type mast to ensure greater bending resistance and
adopted; rotary drive speed electrical multistage control
ensures the compressive resistance. The Kelly bar and rotary drive
are
rig working steadily; the slew ring drives the Kelly bar to
rotate by its installed on the both side tracks of the mast, which
owns
inner dental lamina of sleeve type spindle and realizes
drill-in. The guiding function when drilling. Special mast
turnplate patent
alternation between Kelly system and CFA system is easily
achieved technology owns joint function. Electro-mechanical
interlock
by installing or uninstalling the inner sleeve. spacing makes
the system safe and reliable. The mast can
match different Kelly bars. Large diameter drilling bucket
can
Parallelogram mechanism be installed with the lower mast
dismounted. Mast extension
The parallelogram adjusting mechanism and triangle uniform load
and support cylinder are Installed at the bottom of mast to fit
bracing frame ensure both accurate location of drilling tool and
CFA drilling method and increase drilling depth and the
stability
verticality of mast; The joint between parallelogram adjusting
of the rig.
mechanism and mast is as upwards as possible to increase the
stability of mast; adjust the working range of mast and the
height of Main/auxiliary winch
machine during transportation; all joints of parallelogram
mechanism With world-famous motors and gearboxes, it works stably
and
adopt initiated new type auto-lubricating bearings. reliably;
rope retainer is used to prevent rope from overlapping,
slipping, squeezing and wearing; Lebus drum is adopted to
Mast ensure the layered winding of wire rope to prolong the
service
SR150M/200M is of box type structure with gusset plates as life
of the rope.
SANY Kelly bar plays the leading role in China, and is exported
to Asia, Europe, America and Africa.
Friction Kelly bar (Kelly system) Interlocking Kelly bar (Kelly
system)
It owns such merits as easy operating, large drilling depth
Interlocking Kelly bar owns great anti-twisted ability,
transfers
(more tubes than interlocking Kelly bar), lifting smoothly
without greater pressure to drilling tools without pressure lost,
so it is suitable
unlocking between inner and outer pipe. Pressure is transferred
to for hard formation drilling. SANY interlocking Kelly bar adopts
high
drilling tools by friction force, so it is not suitable for
drilling in hard strength alloy pipe, wear-resistant alloy spline,
and special designed
formation. To protect base machine, the shock absorbing spring
of and treated pressure points, lower pipe parts, baffle ring and
torque
Kelly bar is designed according to different inertia force while
transfer points. Key parts are under strict monitoring to ensure
high
releasing Kelly bar. reliability and long service life during
production.
It includes drilling bucket, auger, core barrel, centrifugal
discharge drilling tools, belling drilling
tools and so on, and can drill in clay layer, sandy gravel,
cobble layer and weathered strata.
n Flat bottom bucket for clay layer
n Flat bottom bucket for tuff
n Flat bottom cleaning bucket
n Double bottom soil bucket
n Double bottom bucket for mixed-layer
n Double bottom bucket for rock
n Double bottom cleaning bucket
n Single start clay auger
n Single start auger for mixed-layer
n Single start rock auger
n Double start clay auger
n Double start conical rock auger
n Double start auger for rock
n Double start auger for soft rock
n Double start auger for hard rock
-
13 SANY SR150M/200M/250M/280M Rotary Drilling Rig with CFA
System
Working Equipment Optional
Note: SANY Casing Oscillator is suitable for SR200C and heavier
rig.
Cab
14
Operate comfortablythe best cab would improve productivity
greatly. (SANY cab for example)
Falling Object Protective Steel Part Welding Structure the
operator can operate the machine comfortably in spite of his
build.The cab came into shape by stamping hi-strength steel
plate. Its
window is made of toughed glass. It's equipped with safety belt
to High-level Sealed Cab
best protect operator's safety. The cab is equipped with seal
ring of good sealing to prevent dust
and rainwater from entering the cab and keep the cab clean. It's
Air Conditionerquiet in the cab, so the operator's fatigue can be
effectively The imported full automatic air-conditioner of standard
configuration mitigated.and big capacity is capable of admitting
air by adjusting and Multi-point Tridimensional Wind
Blowingpurifying the cab air circularly, and hence keeping the air
fresh in
the cab .It can realize quick refrigeration and temperature rise
to With 9 air ports in the cab, the operator can enjoy the
favorable obtain comfortable temperature in cab all the year round.
Moreover, performance of the air-conditioner. There is a defrosting
air port on it has a powerful control panel, which is convenient in
operation. the front windshield in the cab to ensure the operator
clear visual
field. The air ports blowing face and back of the operator can
be Wide Visual Fieldfreely switched as required to adjust the wind
direction and bring
The optimized cab with the same high strength reduces the area
of comfort.
column and effectively lessens the blind area of the visual
field, Computer Monitoring Systemtherefore making operation with
high safety. The front and side
visual windows allow the operator see the state of work device
and The computer monitoring system is assembled with sound and
light
the surrounding environment. The rear visual window and engine
automatic alarm, and the content and position of malfunction can
be
casing in conformity with design height provide wide rear visual
automatically displayed. The system checks the machine timely
and
notifies the operator when the malfunction will happen so as to
field.maintain timely.All-directionally Adjustable Suspended Seat
with Dual-slide-rail Convenient and Comfortable
OperationStructure
It is very quiet in the cab while operating the machine. The
all-The height and location of the seat, obliquity of the backrest,
height directionally adjustable seat of superior quality is very
comfortable. of the armrest and headrest are easily adjustable. The
adjusting The joystick and operation buttons are within your reach,
which is buttons are within the operator's reach. The rigidity of
the seat is labor saving and convenient.also adjustable in
accordance with the weight of the operator so that
Manifold working equipments are supplied to meet special
requirement of customers.
Drilling with casing oscillator (Kelly system) Casing
installation with rotary drive (Kelly system)
Greater embedding pressure can be achieved by casing This method
has solved problems such as large construction for oscillator
instead of Casing Drive Adapter, casing can be embedded manual
casing embedding, need for auxiliary equipment as even in hard
layer. excavator, potential collapse of drilling embedded hole and
the hole-
collapse during drilling. It gains obvious advantages in
drilling in Casing oscillator owns such merits as strong
adaptability to backfill soil layer, shallow sand pebbles layer and
karst cave geology, high quality of completed pile, low noise, no
mud limestone layer. The powerful rotary drilling rig of
SANY-series is contamination, slight influence to former
foundation, easy to control, capable of installing and extracting
casing without the assistance of low cost, etc. It owns advantages
in following geological conditions: casing oscillator. Installing
casing with Casing Drive Adapter ensure instable layer, underground
slip layer, underground river, strata, old verticality and avoid
collapse. Drilling in and installing casing can pile, erratic
boulder, quicksand, foundation of emergency and carry out
simultaneously to improve efficiency. temporary building. (see
SRT150 brochure)
600/800/1000/1200/1500mm
340bar
2180kN.m
500mm
2100kN
20t
2200kN
261mm
630mm
21t
4350mm
2730mm
1810mm
2 /2 7/3 3/3 11/4 11
4934.7psi
1 8
1607865lbf.ft
471910lbf
18sh.ton
494382lbf
2 2
10
19sh.ton
14 3
9 4
5 5
Common construction methods are as follows: Kelly bar with
drilling tools, casing installation with rotary drive, Continuous
Flight Auger
drilling, drilling with casing oscillator, etc. Construction
technologies include dry drilling, slurry support drilling,
whole-course-casing drilling, wall
building drilling, etc.
-
15 SANY SR150M/200M/250M/280M Rotary Drilling Rig with CFA
System
Convenient Maintenance Customer Support
16
Safety
Fan Cover Extinguisher Splash-proof BaffleEscape Window
nFan Cover accidents is greatly avoided. In the cab, there is an
escape
window, through which the operator can make his escape in case
The engine radiator fan are enclosed by the thin iron wire net, of
unexpected dangers.which lessens the overhaul danger and prevents
damage of
blade in case of other objects' downfall nSplash-proof
Baffle
nHydraulic Pilot Lock In the middle of pump chamber and engine
lays the baffle, which
prevents the oil from splashing to the hot position of engine if
the The control handle will not work when the hydraulic pilot lock
hydraulic system is damaged.lever is at the locking position.
Therefore, the possible accident in
consequence of inadvertent operation will be avoided.
nStrengthened Transparent Anti-ultraviolet Glass
nSlip-proof Footboard and Large Armrest When there is intense
light, the light-color glass effectually abates
the entry of ultraviolet, relieves the visual fatigue of
operator and The specially designed footboard efficaciously
prevents the enables the operator to see the working object
easier.backward and sideward slip of soles. The large armrest
prevents
the operators from tumbling when he loses his balance.
nSlip-proof Plate and Pad
nHigh-strength Top Guard Plate The slip-proof plate with
star-shape hole covers on the top of
main valve and the air cleaner. And the slip-proof pad adheres
to The cab top plate is made by Integration of the thick high-many
positions of the vehicle body. Such a layout is applied to strength
steel plate and the reinforced bar stamping. It bears obviate the
maintainer's tumble when they are undertaking excellent collision
resistance and seldom gets deformed. Under maintenance.the working
condition of falling rubbles, the top plate will secure
the operator. The optional OPG top guard plate and the front
window protection net are the optimal choice for
high-altitude
working against falling objects.
nRear View Mirror and Escape Window
The left and right sides of cab are equipped with rear view
mirrors, through which the operator can clearly see the
situation
of rear of the rig without turning back. Thus, the occurrence
of
SANY Rotary drilling rig embodies the human-centric design
conception on each aspect. The guard devices, added at many
positions in the rig, minimize the possibility of injuries.
The fittings originally imported and components of superior
quality have longer maintenance cycle. The remote assembly of
wearing parts is realized so that the maintenance is more
convenient, thus enhancing the utilization ratio of machine and
lowering the maintenance costs.
nEasy to maintain nLong Maintenance Cycle nOil Tank
It is close to the maintenance points to The spare parts of
superior quality can The oil tank of large capacity can reduce
ensure the service being finished quickly effectively prolong
the service life, the cycle of oil filling. The oil tank adopts
and timely and easy to disassemble and lessen the maintenance
time and the top-grade anti-rust technology so that
maintain the hydraulic system, working enhance the availability
of the machine. it will not rust even if the oil containing
equipments, main and auxiliary winch. such chemical substances
as water and nBottom Emission Screw Plugphosphoric acid dips inside
for long time.nEasy Cleaning of Radiator The radiator, fuel tank,
hydraulic oil tank
It's accessible to the radiator of the and engine oil bottom
shell are
engine once opening the service door. equipped with screw plugs
at the
The radiator has special guard shield bottoms, which is
convenient for
outside to block dirt. When cleaning the discharging foreign
substances and
radiator, it only needs dismantle the waste liquid out in the
replacement of oil
guard rail for washing. or cleaning. A quick detachable baffle
is
installed at the bottom to prevent the nEasy Replacement of
Filter elementemission screw plug from damage.
For easy replacement of wearing parts, nOverhead Guard of
Enginethe fuel, engine oil, hydraulic oil and air
filters conduct the remote installation in The overhead guard of
engine is
the design process, accordingly, the equipped with a spring for
convenient
operator can quickly replace them even opening. After opening
the overhead
standing on the ground as long as the guard of engine, the
engine can be
service door is opened. easily maintained.
All customers of SANY Rotary Drilling Rig can enjoy the
commitment of overall services.
Sany has established branches and 300 offices over 100
countries and regions. In china, there are 29 branches and
208
offices to ensure a service center within 150km.
After receiving the service call from customer or distributor,
the
service engineer will afford technical support by
communicating
to customer by phone or at the site.
The service engineer must arrive at the site on time by
appointment with customer.
24 hours waiting-on-orders system for service engineers.
The service engineer shall not leave the site before
successfully
solving the malfunctions, and shall be permitted by the
customers.
In case of not solving the problem within three days,
technical
support and guide will be supplied from headquarter.
Service commitment
Pre-sale service Install and debug the equipment.
Technical consultations for special project. Train the operator
on site
Equipment model selecting. Solve the malfunction on site, rapid
and actively.
Design products according to the customer special Deliver spare
parts to the customer.
requirements. Special service for key projects.
Train service personnel for the customer. Provide the
opportunity for technical exchange.
Provide consultation for new, special and difficult project
construction.Value-added service
Give applicable construction plan. Top-level tracing service for
VIP project.
Special operating certification agent; provide operator train
In-sale Service regularly all the year
Help customer for machine transportation. International agent
training and qualifications
Advance check before acceptance. Big-scale maintenance
business
Introduce SANY service system. Regular patrol inspection
Technology update
After-sale Service Electric circuit retrofit
Assist the customers in working out the initial construction
Offer professional maintenance periodically for
customer.scheme.
Service content
1 2 3 4 5 6 7 8 9 10 11