BERKO PRODUCTION was founded in 1987. as a small
workshop that throughout the decades of work, knowledge and
continuous innovation, it has grown into the company which is
today engaged in the production of agricultural machinery.
Through constant development, acquisition of new innovations
in the field of technology and methods of work we have gained
experience that justifies your trust and adapted our products to
suit all the agricultural needs as well as for the soil.
Our goal is to offer quality, simple, affordable mechanization
and thus facilitate and improve the production of our farmers.
Many years of experience, constant market research, customer
monitoring, requirements and constant improvement are the
guaranteed quality of our products and the basic foundation of
our business.
OUR PRODUCTS
CORN PICKER TWO ROWS
TRAKTOR TRAILERS
„V“ TYPE DISC HARROW-TRAILED WITH
ROLLER
CAMBRIDGE ROLLER
SUBSOILERS WITH ROLLER
SHORT DISC HARROW WITH
ROLLER
SPRING TINE TILLER WITH ROLLER
CHISEL WITH ROLLER
INTER ROW CULTIVATOR IRC
CORN PICKER ONE ROW
HARVESTER FOR FRESH
SWEET MARKET CORN
HARVESTER FOR
SWEET CORN
GRUBBER WITH
ROLLER
INTER ROW CULTIVATOR
BERKO
THE WORLD’S FIRST „BERKO“ CORN PICKER
FOR SWEET-FRESH –CORN MARKET
The world’s first sweet corn picker is for the use of fresh sweet corn cobs and market corn cobs.
Fresh sweet (market) corn is very nutritious, inevitable addition to a healthy and balanced diet, refreshment during hot days, an irresistible treat, quality snack and a rich source of energy.
It enables agricultural producers to machine-harvest cobs and deliver top-quality corn.
Gently and quickly absorbs the pistons completely eliminating mechanical damage.
The picker enables mechanical harvesting of pistons which preserves the green mass of the piston in its entirety. The quality of harvesting in terms of intact piston and preservation of green mass is identical to hand picking.
Compared to standard types of corn, this type of corn has a markedly increased sugar level and is therefore called „super sweet“ or „extra sweet“.
The picker harvests the cobs without damaging the grain and the corn cob.
It collects the pistons in the bunker, the height of emptying the bunker is up to 4,25 m, which enables the emptying of the bunker into trucks.
It harvests the pistons equally well in both dry and wet conditions.
The main advantage of this picker is that it replaces dozens of people, it can be used to harvest pistons even in humid conditions, unlike the workforce where too much moisture prevents people from working.
Available on the market as early as 2020.
NEW„BERKO“ HARVESTER FOR SWEET CORN
INTENDED FOR INDUSTRIAL PROCESSING
At the beginning of 2021. the production of a new type of picker with the latest technical and technological solutions. The picker is intended for harvesting sweet corn for further industrial processing.
Gently and quickly absorbs the pistons completely eliminating mechanical damage.
The picker enables mechanical harvesting of pistons which preserves the green mass of the piston in its entirety. Since the green mass (husk) of the cob remains on the cob, the grain does not become dirty.
Daily capacity is 5ha/day. It collects the pistons in the bunker, the height of emptying the bunker is up to 4,25 m, which enables the emptying of the bunker into trucks. It harvests the pistons equally well in both dry and wet conditions.
It has a suction turbine that allows the removal and chopping of the remains of the stabilizer and the green mass that separates after harvesting the piston.
The chopper provides efficient shredding of the green mass.
Economical and quickly cost-effective due to the reduction of high labor costs.
Simple and quality harvesting, take advantage of the productivity of mechanical harvesting without sacrificing the quality of sweet corn.
BERKO“ CORN PICKER
This corn picker is named after our company BERKO. It is intended for
harvesting seed corn, mercantile corn and popcorn.
Our company is ranked among the world’s leading producers of corn pickers.
We produce two types of „BERKO“ single row and double-row corn harvesters.
„BERKO“ combines are easy to handle, maintain, and are adapted to the needs of farmers since they contain fewer parts that are subject to easy maintainence.
Its operation requires 25-30% less tractor power.
The quality of harvesting and husking cobs is 15-20% better than in similar models.
„BERKO’s” output is 30% higher. This amounts to 7 hectares a day with the two-row harvester.
The most significant difference is that „BERKO“ harvesters are designed with reversible mechanism- an opposite drive with the possibility of changing the direction of rotation, which enables the operator to unclog the harvester without leaving the tractor. Therefore, in the case of clogging, quick unclogging of every section of the harvester is made possible without the possibility of injury of the operator. This is a unique feature of “BERKO” harvesters.
TRACTOR TRAILERS
We have enriched the production program with tractor trailers with
total mass:
8t ~ 11t ~ 14t ~ 18t
Trailers are manufactured according to current valid standards,
homologated and certified in accordance with European standards
(standard EU 2015/68).
We can proudly say that world-renowned manufactures of built-in
components are our business partners who have provided customers
with the best quality, usable standards and technical documentation.
We are proud of the results we have achieved and managed to ensure
the production of agricultural products that offer quality and
functional tractor trailers that are in the range of world manufactures,
modern design, projects and produced according to the latest EU
requirements and standards.
„V“ TYPE DISC HARROW-TRAILED WITH ROLLER
The towed „V“ plate belongs to the category of large ie. heavy
saucers. It is suitable for peeling stubble, shredding and the
question of harvest residues and manure, as well as for plowing
plowed land before sowing.
Tillage is accomplished using rotating toothed discs.
The discs are made of high-alloy wear-resistant steel.
The hydraulic cylinder very easily raises and lowers the wheels
and moves the machine from the machine from the transport to
the working position.
The latest cross-sectional construction provides a solid
construction in all operating conditions.
CAMBRIDGE ROLLER
The cambridge roller produced in „BERKO“ is
a multi-purpose machine.
It is used for rolling the prepared soil before
and after sowing wheat, soybeans, or corn,
which ensures uniform germination of crops
and prevenst the formation of crusts.
Disassembly and assembly of the machine, the
alteration from transport to working position is
enabled by the use of hydraulics.
GRUBBER AND SUBSOILERS WITH ROLLER
Gruber represents a technological revolution in tillage
because it replaces a large number of different
machines.
They are suitable for cultivating different types of soil
with a compact and combined structure.
Gruber allows good soil shredding and mixing of crop
residues.
The rotor increases performance as it shreds grass and
crop residues, crumbles, shreds and levels the soil.
The shredder provides twice the working efficiency
compared to conventional tools. It breaks down the soil
base and helps the plants develop early. It forms a
reservoir of water underground.
.
SHORT DISC HARROW WITH ROLLER
The disc harrow has great advantages in tillage for the
preparation of sowing bedding and chopping plant
residues.
By mixing plant residues with the soil, a bed is obtained
which is rich in crushed humus and harmonized
biological balance.
Saucer’s working results are visible on the yields next
year.
SPRING TINE TILLER WITH ROLLER
Seeders are used for pre-sowing land preparation,
which is inevitable for the work of every farmer.
Our seed drills are extremely robust and therefore have
a longer service life, minimal servicing and
maintenance costs.
We produce seed hoppers in working widths from 3m to
12,2 m.
The machine can be produced at the customer’s
request with „S“ springs, spear-shaped attachments
(„duck paws“), or with Germinator flat springs with a
spear extension.
CHISEL WITH ROLLER
The chisel is a machine of a newer generation that breaks the
plow sole at a depth of 45 cm, shakes the soil, activates life in
the soil and thus improves plant growth. The shape of the
blade used in our machines has proven itself well because it
passes well-slides through the ground and prevents lumps
from coming to the surface.
Optimal service life and power are achieved due to desing
parametric modeling with a 3D system and a variety of MES
design systems.
INTER ROW CULTIVATOR
The machine is intended for inter-row cultivation of wide-row
agricultural crops: corn, sugar beet, sunflower and vegetable
crops.
Each working unit of our row cultivator works independently
and has its own wheel which controls the desired depth of
cultivation.
Elastic „S“ hoes enable efficient weeding.
The bearing of the work units is made using ball bearings,
and not plastic sleeves as with other manufacturers.
We make eight-row and six-row cultivators in a collapsible
version with a hydraulic cylinder.
Robust and rigid construction ensures stability in operation
and longevity of the machine without maintenance.
SERVICE AND SPARE PARTS
When buying agricultural machinery for each customer, in
addition to quality and price, the most important parameter when
choosing is the availability of spare parts as well as professional,
conscientious and timely service.
The service of the „BERKO“ team is well-coordinated, consistent
of professional and experienced operators. With the expertise of
our team, good organization, timely servicing and a good supply
of spare parts, we provide our customers with a sense of
security and satisfaction.
The mobile service team ensures the fastest elimination of any
problem in the shortest possible time.
QUALITY
The quality policy of the company „BERKO“ is based on constant development and innovation.
Development and continuous innovation activities are accompanied by the adoption of the latest technical and technological achievements.
We have successfully achieved the set goal: Always at the top of agriculture, construction and design of agricultural machinery.
Production harmonized according to the valid standards of the European Union, components of world renowned manufactures, experience and knowledge have brought the quality of our products to perfection.
The quality of our products is best evidenced by the smiling faces of our customers and the friendly greeting during the reunion, as well as the numerous awards and recognitions we have gained by attending international fairs around the world.
SERVICES
Machining of all types of parts, service cutting and bending.
Various types of metal machining
Plasma cutting up to 15mm, maximum 3000x1500mm
CNC bending up to 8mm, maximum 3000mm, 120t
Drilling
Milling
Scraping
Welding
By using modern technologies and MES designing
systems we are always in step with the times.
REFERENCE
We are export oriented. Our products are exported in over 75%. The
network of our satisfied customers has so far been developed on the
European market, and Asian, South American and African markets.
Reference:
Germany, Sweden, Switzerland, Norway, Belgium, Netherlands, Austria,
Czech Republic, Slovakia, Hungary, Lithuania, Romania, Slovenia, Croatia,
Italy, Macedonia, Bosnia and Herzegovina, United Kingdom, Portugal,
Russia, Belarus, Moldova, Ukraine, Kazakhstan, Georgia, Kyrgyzstan,
Uzbekistan, Iraq, Turkey, Brazil, Zambia.
OUR SUCCESS STORY
TRADITION
LONGER THAN 30 YEARS…
TRUST
PARTNER WHO IS TRUSTED!
EXPERIENCE
TEAM OF AGRICULTURAL EXPERTS.
CREATIING SOLUTIONS WITHOUT COMPROMISE.
In the coming years our imperative is to increase the volume of
production and conquer new products and technologies while
maintaining a high level of quality of products and services.
Be part of our growth because we listen to your advice and
suggestions.
WHY IT IS WORTH COOPERATING WITH US ?
Check the quality of our products and services, join to the
team of our loyal and esteemed customers!
Equal position in society
is the best!
HOW TO REACH US?
www.berko.rs
Tel: +381(0)24862040
Mob: +381(0)694070214
E-mail: [email protected]
Serbia:
21000 Novi Sad, Nikole Pašića 24
Factory:
24435 Mol, Đure Daničića 35