Analysis and Design of RC Structures using ETABS
Elite-Techno Groups Jaipur Electronic Market,
Gopalpura bypass Jaipur-302018
www.elitetechnogroups.com Page 2
Who we are
The founder of Elite Techno Groups, Himanshu Arora found it in themselves to respond
to the need of industry ready engineers in the civil engineering segment. Elite Techno
Groups work towards helping students embrace the industry requirements by exposing
them to real world scenarios and providing them with the impetus to apply their skills and
knowledge to tackle the issues presented.
How we do
Elite Techno Group organizes Training Programs where our expert faculties conduct the
workshop in an interactive manner with the participants working on the application of
what they are taught during the course of the workshop. Various individual and team
based exercises are conducted so that our future engineers are comfortable working with
others as they are with themselves.
What makes us different
Elite Techno Groups has a dedicated team of faculties that leaves no stones unturned in
educating and motivating their students to dream big.
But above all, the reason why we are good in what we do is that we maintain a personal
bond with our students. Our staff ensures that the students feel at ease with the faculties
during any conversation within our outside the classrooms. Be it a random doubt or some
obstacle during the preparation for a competitive event, our faculties will get the students
out of bind.
Main Highlights of the 5 day / 30 hours Training Program:-
➢ Geometric Modelling of Structures: 1 day
Analysis and Design of RC Structures using ETABS
Elite-Techno Groups Jaipur Electronic Market,
Gopalpura bypass Jaipur-302018
www.elitetechnogroups.com Page 3
➢ Loading on Structures : 1 day
➢ Analysis and Design: 1 day
➢ Case Study from Industry: 1 day
➢ Design by participants: 1 day
Course Details
Duration: 5Day/ 40 Hours Day Topic
Day 1 ➢ Prerequisites for Modelling:
o Architectural Floor Plan
o Architectural Section
o Site Contour Plan
o MEP Cutout Detail
➢ Soil Investigation Report
o Soil Bearing Capacity
o Allowable Settlement
o Ground Water Level
➢ Types of Foundation
o Isolated Foundation
o Combined Foundation
o Mat Foundation
o Pile Foundation
o Pile Raft Foundation
➢ ETABS Training Module 1
o Main Grid of the Structure
o Secondary Grids for auxiliary structures
o Material Properties
▪ Grade of Reinforcement
▪ Grade of Concrete for Beams, Columns and
Slabs
Analysis and Design of RC Structures using ETABS
Elite-Techno Groups Jaipur Electronic Market,
Gopalpura bypass Jaipur-302018
www.elitetechnogroups.com Page 4
o Member Properties
▪ Geometrical properties of Beam
▪ Geometrical properties of Column
▪ Thickness of Slab
▪ Thickness of Wall
o Construction of the geometry of entire structure
using the members defined.
Day-2 ➢ Beams
o Different types of Beams and their properties
o Study of BMD, SFD and AFD for a Propped
Cantilever
o Design of beam section via Neutral Axis Derivation
using IS 456
o Limit state of Serviceability
➢ Columns
o Study of BMD, SFD and AFD for a Portal Frame
o Design of Column Section for Axial load and
Uniaxial bending moment using IS 456
➢ IS 875
o Part 1 – Dead Load
o Part 2 – Imposed Load
o Part 3 – Wind Load
o Part 4 – Snow Load
➢ IS 1893 – Earthquake Load parameters for the
structure
➢ ETABS Training Module 2
o Load Cases
o Load Combinations as per IS 456
o Assignment of Load
▪ Dead Load
▪ Imposed Load
▪ Wind Load
Analysis and Design of RC Structures using ETABS
Elite-Techno Groups Jaipur Electronic Market,
Gopalpura bypass Jaipur-302018
www.elitetechnogroups.com Page 5
▪ Earthquake Load
o End Conditions for Beam
o Load Distribution for Slab
▪ One Way
▪ Two Way
Day-3 ➢ IS 13920
o Why is the need to study this code?
o Provisions of code for Beams
o Provisions of code for Compression Members
➢ IS 1893
o Important provisions of code for safety of the
structure
o Check for Modal Mass Participation Ratio
o Check for Story Drift Limits
➢ Slab Design
o One Way Slab
o Two Way Slab
o Limit State of Serviceability
➢ ETABS Training Module 3
o Analysis of Structure
o Interpretation of the results
o Design of Structure
o Interpretation of the results
➢ ITERATION!!!
Day - 4 ➢ Case Study on a housing project.
➢ Architectural Plans
➢ Mechanical, Electrical and Plumbing Plans
➢ Soil Investigation Report
➢ Challenges in the project
Analysis and Design of RC Structures using ETABS
Elite-Techno Groups Jaipur Electronic Market,
Gopalpura bypass Jaipur-302018
www.elitetechnogroups.com Page 6
➢ Structural Drawing for foundation
➢ Structural Drawings for Beams
➢ Structural Drawings for Columns
➢ Structural Drawing for Slabs
➢ Economics of the structure
➢ Detailed Q and A session on different aspects of
design
Day-5 ➢ Sample problem statement along with the
supplementary data shall be provided to all the
students.
➢ Modelling, analysis and design of structure in ETABS
by all participants in groups.
➢ Careers in Civil Engineering.
Certification: All the participants will be given “Certificate of Participation” and 5
students will get “Certificate of Appreciation” (on basis of a test taken at the end of Training
Program) issued by “ELITE TECHNO GROUPS”
Requirements from college:-
➢ Seminar Hall with a capacity of 200 students
➢ Projector System and mike system facility
➢ Accommodation facility for the faculty
Course fee:- Fee for per participant including tax will be Rs. 3000/- only.