Alarm Management
IMPLEMENTING EVIDENCE
BASED PRACTICE TO REDUCE THE FREQUENCY OF PHYSIOLOGICAL
ALARMS Julie Zimmerman, RN, MS, CCRN, CNSAlbert Lobato, Telemetry TechnicianMark Miller, RN, USD CNS Graduate
Student
The Joint Commission 2014 National Patient Safety Goal 6
REDUCE THE HARM ASSOCIATED WITH CLINICAL ALARM SYSTEMS
Clinical alarm systems are intended to alert caregivers of potential patient problems, but if they are not properly managed, they can compromise patient safety.
CONCERNS: ▪ Numerous Alarms & Alarm devices ▪ Increased exposure to alarms ▪ Staff desensitization▪ Delayed responses & missed alarm signals▪ Improper modification/disabling of alarms ▪ Non-Actionable alarm settings/limits
Alarms – The Problem
Palomar Health Medical Device Alarm Safety Committee, 2013.
American Association of Critical Care Nurses Alarm Management
Recommendations
Expected Practice▪ Provide proper skin preparation for ECG electrodes. (Level B) ▪ Change ECG electrodes daily. (Level E) ▪ Customize alarm parameters and levels on ECG monitors. (Level E) ▪ Customize delay and threshold settings on oxygen saturation via
pulse oximetry (SpO2) monitors. (Level E) ▪ Provide initial and ongoing education about devices with alarms.
(Level E) ▪ Establish interprofessional teams to address issues related to
alarms, such as the development of policies and procedures. (Level E)
▪ Monitor only those patients with clinical indications for monitoring. (Level C)
AACN Best Practice Alert, May 2013.
HOW ARE WE DOING? ALARM FREQUENCY
Data collection on 10 patients admitted for at least 24 hours on: 2 East, 10 East CCU, and TICU
2 10
CCU
TICU
0
100
200
300
400
500
600
700
800
LOW ALERT YELLOW HIGH ALERT REDTOTAL IN 24HRS
SaO² L
OW
RR LOW
HR L
OW
0
100
200
300
400
500
2 East
10 East
CCU
TICU
Staff Survey Results from 2 East, 10 East CCU, and TICU
HOW ARE WE DOING? CURRENT ECG PRACTICE
2 EAST PILOT PRACTICE CHANGES & NURSING
ACTIONS▪ Provide proper skin preparation for ECG electrodes.▪ Properly apply and replace ECG electrodes daily.▪ Individualize alarm parameters▪ Ensure patient/patient family alarm education▪ Promote Alarm Safety- Audibility, Practices, &
Communication
Palomar Health Medical Device Alarm Safety Committee, 2013.
Proper Skin Preparation
▪ Clip excess hair at ECG electrode sites
▪Wash the isolated electrode area with soap and water.
▪Use a rough washcloth or gauze to roughen a small area of the skin.
▪ Ensure electrode sites have properly dried.
▪Do not use alcohol for skin preparation.
Palomar Health Medical Device Alarm Safety Committee, 2013.
1. Remove part of the stratum corneum to allow for electrical signals to travel to the electrode.
2. Scratch the stratum granulosum to reduce motion artifact.
IMPROVED CONDUCTIVITY
FIVE-LEAD SYSTEM
RA – white electrode – Place where the Right arm joins the torso. (below R clavicle, 2nd ICS, R MCL)
RL – green electrode – At the level of the lowest rib. (R lower ribcage, 8th ICS, R MCL)
LA – black electrode – Place where the Left arm joins the torso. (below L clavicle, 2nd ICS, L MCL)
LL – red electrode –At the level of the lowest rib. (L lower ribcage, 8th ICS, L MCL)
V or Chest – brown electrode – placed in V1 (4th ICS, R SB) or V3 position (midway btwn 4th &5th ICS)
R= right, L= left, ICS = intercostal space, MCL – midclavicular line,
SB= sternal border
Correct 5 – Lead ECG Electrode Placement
V1V3
Correct ECG Electrode Placement
5 Lead ECG Site Selection:
▪ Avoid bony prominences
▪ Avoid fatty areas
▪ Avoid major muscles
Palomar Health Medical Device Alarm Safety Committee, 2013.
BEFORE AND AFTER: Proper ECG prep & placement
Palomar Health Medical Device Alarm Safety Committee, 2013.
Individualize Alarm Parameters
o Personalize alarms to meet the needs of individual patients.o Consider patient’s medical condition, status changes, and
activity levels.o Adjust alarms within 1 hour of assuming care.
▪ Individualization of physiological alarm parameters, conducted on a PCU/IMU resulted in a 43% reduction in critical monitor alarms. Additionally, clinical evidence demonstrates personalizing patient alarms reduces the number of false alarms.
MCP 572.1 Management of Clinical Alarms in Patient Care Settings
UCSD Medical Center Practice Guidelines for Assessment and Reassessment, Clinical Alarms
Promote Alarm Safety:
o Confirm ALL clinical alarms are audible from outside patient rooms.
***EVEN when patient doors are closed***
AUDIBILITY
PRACTICESDisconnecting patients from physiological monitors:o Constitutes a change in a patient’s level of ordered careo Can only occur with a required physician/provider order OR,o Only when essential for direct patient care or safety.o Is performed solely by qualified healthcare personnel.o Must NOT be performed by patients/patient family members.
Promote Alarm Safety:
COMMUNICATIONConduct proper communication with the telemetry
technicians.
o Guidance on when to call/notify telemetry technicians: 1) When disconnecting patients from the physiological monitors.
2) Before administration of intravenous cardiac medications/drips.
3) Prior to patient transportation/transfer off of a unit.
4) Upon returning to the unit.
5) Preceding pacemaker interrogation.
6) Prior to admission or discharge.
Tedx Alarm VideoClick on the link above to the Tedx Alarm Video.
This may illicit an emotional response.
The text above is hyperlinked; however, the link is posted below and may be cut and pasted for email/sharing.
Some individuals may wish to view this video at home or in a private setting.