WiFi-104 WiFi Lighting Control System WiFi-104 Controller 4A x4CH A Max 16 Max Current Load: Communication Standard: 2.4GHz Wi-Fi, 802.11b/g/n Protocol DC12V~DC24V Input Voltage: 100m(Distance of cross-eyed) WiFi Control Distance: Indicator light Instructions RUN LINK RX/TX (2) Indicator Light Instructions 127.6mm 73mm 44.5mm RUN RX/TX LINK EXT KEY SSID MATCH FUN RUN RX/TX LINK EXT KEY SSID MATCH SCENE 192W/384W(12V/24V) Max Output Power: RUN RX/TX LINK EXT KEY SSID MATCH SCENE 5 4 6 3 7 2 8 1 9 0 A F B E C D L128×W73×H45mm L135×W80×H50mm 290g -20 ~50 ℃ ℃ Working Temperature: Working Temperature: Working Temperature: Product Size: Product Size: Product Size: Package Size: Package Size: Package Size: Weight(G.W.): Weight(G.W.): Weight(G.W.): R4-5A Constant Voltage Zone Receiver 5A 4CH A × Max 20 CC350/700/1050mA×4CH (3 in 1) L175×W44×H30mm L175×W44×H30mm L178×W48×H33mm L178×W48×H33mm 110g 110g -20 ~50 ℃ ℃ -20 ~50 ℃ ℃ Max Current Load Output Current: Wireless Frequency: Wireless Frequency: 2.4GHz 2.4GHz DC5V~DC24V DC12V~DC48V Input Voltage: Input Voltage: 50m(Distance of cross-eyed) 50m(Distance of cross-eyed) Remote Distance: Remote Distance: 100W/240W/480W(5V/12V/24V) 1.05W-48.3W 4CH Max 193.2W × Max Output Power: Output Power: 2 3 4 5 6 7 8 1 10 12 9 WiFi - 104 WiFi - 104 R4-CC Constant Current Zone Receiver R4- 5A R4- 5A R4- CC R4- CC WiFi-104 is a versatile office/home lighting control system. Through WiFi function build-in mobile devices could control various types of LED lighting products after installing related software on our iOS or Android phones, tablet PCs and other mobile devices. It makes the LED lighting control more intelligence, networking and humanization. WiFi-104 lighting control system integrated with four functional controls including dimming, color temperature adjusting, RGB and RGBW, which could be set as single color, color temperature(nature white + warm white and nature white + warm white + cool white), RGB and RGBW five types. Easy to control installed various of LED lights on WiFi Software. Meanwhile, it supports max 12 zones control. We could do what you think! WiFi-104 control system supports connection directly or by router: In directly connection, mobile phone, pad can directly control the WiFi-104 controller + R4-5A/R4-CC wireless control, without any third party of network equipment ; Connection by a router, in addition to reach all the functions of direct connection and will not affect the normal Internet function at the same time, the most important part is to support the software interface to switch multi-control systems, control independent of each other systems more convenient, for example, supporting 24 zones in two systems. In addition, you can DIY the lighting on software according to your habits. You can DIY any color, any changing you like. It will let yourself relish in your sense of accomplishment for your special life color. You can also use our 2.4G RF remote M12 if there is no software, more options for you. 1. Product Parameter: DC3V~DC46V Output Voltage: Operation Platform: Screen Resolution: WiFi Function: Byte: Language: Category: Other: No Lower Than Android 2.3 or iOS6.0 Above 960*640 Must Have WiFi Function Android Edition (932K); iOS Edition (2.8MB) English Appliance Free, No Plug-ins M12 Remote Control Working Voltage: Dimensions: Transmitting Frequency: Remote Distance: Weight (G.W): DC (Distance of cross-eyed) L104× W60× H9mm 3V(CR2032 button battery) 2.4GHz 30m 42g Software Technology Parameters Controller Operating Instructions 3. 2. Configuration Diagram Side A Side B Power Input / LED Output Manufacturer Interface SSID Code switch Learning ID Key Scene Indicator (1) Install / Uninstall ANT ANT installation instruction It flashes quickly about 25s during the electric initialization. Flashes once per second after initialization It keeps on when the mobile device connected with WiFi controller, and turns off when disconnected. It turns on when the controller receives or transmits the WiFi data. Turns off in the free time. Set the controller's SSID number with WiFi-104-SSID-0 to total 16 No. which means our product could set 16 isolated LAN in the same area. The controller will re-enter initialization status once the code switch changes. RUN indicator light will flash quickly about 25 seconds, mobile device need to search and connect WiFi again after Initialization finished. code switch, SSID number range from WiFi-104-SSID-F, (3) SSID Number Setting Install the WiFi antenna clockwise, Uninstall anticlockwise WiFi-104 LED Lighting Control System V1. 1 WiFi-104 LED Lighting Control System V1. 1 1 2
5
Embed
WIFI-104 WIFI Lighting Control System - Ecolocityled.comcdn.ecolocityled.com/downloads/wifi-104-manual.pdf · WiFi-104 WiFi Lighting Control System WiFi-104 Controller ... WiFi controller
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
WiFi-104 WiFi Lighting Control System
WiFi-104 Controller
4A x4CH AMax 16Max Current Load:
Communication Standard: 2.4GHz Wi-Fi, 802.11b/g/n ProtocolDC12V~DC24VInput Voltage:
100m(Distance of cross-eyed)WiFi Control Distance:
50m(Distance of cross-eyed)50m(Distance of cross-eyed)
Remote Distance:Remote Distance:
100W/240W/480W(5V/12V/24V)1.05W-48.3W 4CH Max 193.2W×
Max Output Power:Output Power:
G 255R 255 B 255 W 255
W80% 80%
CONTROLLER1Long press to turn off single zone or group
ModeDevice SceneGroup On/off
2 3 4 5 6
7 8
RGBW
1RGB CT1 RGB
RGBW
10 11 129RGBW DIM
Group1 Group2 Group3
DIM
DIM RGBW RGBW
CT2
WiFi-104WiFi-104
R4-CC Constant Current Zone Receiver
R4-5AR4-5A R4-CCR4-CC
WiFi-104 is a versatile office/home lighting control system. Through WiFi function build-in mobile devices could control various types of LED lightingproducts after installing related software on our iOS or Android phones, tablet PCs and other mobile devices. It makes the LED lighting control more intelligence, networking and humanization. WiFi-104 lighting control system integrated with four functional controls including dimming, color temperature adjusting, RGB and RGBW, which could be set as single color, color temperature(nature white + warm white and nature white + warm white + cool white), RGB and RGBW five types. Easy to control installed various of LED lights on WiFi Software. Meanwhile, it supports max 12 zones control. We could do what you think!WiFi-104 control system supports connection directly or by router: In directly connection, mobile phone, pad can directly control the WiFi-104 controller + R4-5A/R4-CC wireless control, without any third partyof network equipment ;Connection by a router, in addition to reach all the functions of direct connection and will not affect the normal Internet function at the same time, the most important part is to support the software interface to switch multi-control systems, control independent of each other systems more convenient, for example, supporting 24 zones in two systems. In addition, you can DIY the lighting on software according to your habits. You can DIY any color, any changing you like. It will let yourself relishin your sense of accomplishment for your special life color.You can also use our 2.4G RF remote M12 if there is no software, more options for you.
No Lower Than Android 2.3 or iOS6.0Above 960*640Must Have WiFi FunctionAndroid Edition (932K); iOS Edition (2.8MB)EnglishApplianceFree, No Plug-ins
M12 Remote Control
Working Voltage:
Dimensions:
Transmitting Frequency: Remote Distance:
Weight (G.W):
DC
(Distance of cross-eyed)L104× W60× H9mm
3V(CR2032 button battery)2.4GHz30m
42g
Software Technology Parameters
Controller Operating Instructions3.
2. Configuration Diagram
Side A Side B
Power Input / LED Output ManufacturerInterface
SSID Code switch
Learning ID Key
SceneIndicator
(1) Install / Uninstall ANT
ANT installation instruction
It flashes quickly about 25s during the electric initialization. Flashes once per second after initialization
It keeps on when the mobile device connected with WiFi controller, and turns off when disconnected.
It turns on when the controller receives or transmits the WiFi data. Turns off in the free time.
Set the controller's SSID number with WiFi-104-SSID-0 to total 16 No. which means our product could set 16 isolated LAN in the same area. The controller will re-enter initialization status once the code switch changes. RUN indicator light will flash quickly about 25 seconds, mobile device need to search and connect WiFi again after Initialization finished.
code switch, SSID number range from WiFi-104-SSID-F,
(3) SSID Number Setting
Install the WiFi antenna clockwise, Uninstall anticlockwise
WiFi-104 LED Lighting Control System V1.1 WiFi-104 LED Lighting Control System V1.1
1 2
1Network
ZoneWiFi-104-SSID-2
32:AA:3C:7E:B4:DBDisconnected
2
Device List
2 3 4
5 6 7
1
8
10 11 129
WiFi-104-SSID-0
32:AA:3C:7E:B4:DA
Network
Zone
Connect to WiFi-104-SSID-1
A. App software Download
Apple WiFi connectionAndroid WiFi connection
(1) Network connection setting way
Connect to the WiFi-104 controller, the step as (1)same
B. How to operate the APP software
Scene Interface
RUN
RX/TX
LINK
EXT KEY
SSID
MATCH
SCENE
SCENE
SCENE Key and MATCH Key
Scene Save
Scene 2
Scene 3
Scene 4
Back
Scene 1
WiFi-104 support 2 connection modes: Directly connection as router or connect by additional router.
The mode of connecting WiFi controller as a router
The mode of connect with a additional router:
Connnect WiFi-104 controller to the additional router network:
Click “Network” key to enter Network interface(as legend-3-1), start "connect to exiting LAN", software will search the workable WiFi net
SSID list, choose the specified router to connect (Note: do not choose WiFi-104 controller), can add the WiFi-104 controller to the
wireless router(as legend-3-2 the wireless router TP-LINK1)
C.
NetworkBack
User setting
Wireless mode
Connect to existing LAN
Change SSID and password
NetworkBack
Available wireless LAN networks
TP-LINK1
WiFi-104-SSID-0
WiFi 104 SSID 1- - -
User setting
Wireless mode
Connect to existing LAN
Change SSID and password
WiFi-104-SSID-2
WiFi-104-SSID-3
WiFi-104-SSID-4
( )Legend-1
( -2-1)Legend
( -3-1)Legend
B.
A.
( -2-2)Legend
1Network
ZoneWiFi-104-SSID-1
32:AA:3C:7E:B4:DBConnect to TP-LINK1
2
Device List
2 3 4
5 6 7
1
8
10 11 129
WiFi-104-SSID-0
32:AA:3C:7E:B4:DA
Network
Zone
Connect to TP-LINK1
1Network
ZoneWiFi-104-SSID-2
32:AA:3C:7E:B4:DDConnect to TP-LINK1
D.
Connect a additional router interface
[ Restore factory settings/Delete password ]
MATCH
WiFi-104 as a router interface
Delete WiFi-104 controller list
No connect to WiFi-104 controller
Network interface
Zone function interface Change the background interface
Connect to additional router TP-LINK1
Connect to WiFi-104
Manual searching the WiFi-104 controller which connect to the additional router
Workable WiFi-104
WLAN settings
WLAN
Connect to WiFi-104-SSID-0
Network notification
Auto Connect
WiFi-104-SSID-0
TP-008
ACW1F
Notify me when an open network is
available
set the way of network’s connection
Connected
Remembered, secured with WPA/
WPA2 PSK
Remembered
WLAN networks
16:07
Android scan for downloadiOS scan for download
14:17 PM
Wi-FiSettings
Wi-Fi
Other...
Ask to jin Networks
Known networks will be joined automatically.if no known networks are available, you willhave to manually select a network.
CHOOSE A NETWORK...
WiFi-104-SSID-0
WiFi-104-SSID-1
100%
14:17 PM 100%
Network interface
( -3-2)Legend
WLAN settings
WLAN
Connect to WiFi-104-SSID-0
Network notification
Auto Connect
WiFi-104-SSID-0
TP-008
ACW1F
Notify me when an open network is
available
set the way of network’s connection
Connected
Remembered, secured with WPA/
WPA2 PSK
Remembered
WLAN networks
16:07
WiFi-104-SSID-0
Cancel Forget Disconnect
StatusConnected
Signal strengthExcellent
Link speed65Mbps
SecurityOpen
IP address10.10.100.103
Android cancel store the WiFi-104 connection
14:17 PM
WiFi-104-SSID-0Wi-Fi
Forget this Netnwork
IP ADDRESS
100%
DHCP BootP Static
IP Address
Subnet Mask
Router
DNS
Search Domains
10.10.100.103
255.255.255.0
10.10.100.254
10.10.100.254
Hi_flying
Apple cancel store the WiFi-104 connection
(4) MATCH Key and SCENE KeyShort press MATCH key, WiFi controller begins its learning ID status for the standard M12 remote (learning method, see P7)
Short press SCENE key sequentially to the user-saved scene modes, 4 scene total.
Long press MATCH key and SCENE key simultaneously more than 2 seconds, the machine will back to the default parameter, including the
parameters of changing modes, zone and group parameters and network parameters. Machine default parameters: Only the 1st zone is
present, default RGBW mode, the changing mode is RGB skipping, the brightest is white, no groups, network SSID is WiFi-104-SSID-X (X is
the actual coding switch corresponding SSID values), WiFi-104 controller restore as directly connect and the connection password is blank.
The APP software: instructions of 4.
Enter mobile device's WiFi setting, click the WiFi function, mobile device search the WiFi and list the working WiFi controller
automatically(As Legend-1), Click the SSID number to connect (default is no password).
Click mobile device's icon to start the software, the software will search and list the working WiFi controller automatically,
and there is a blue wireless icon (as Legend-2-1)
Workable zone NO.
Exit WiFi-104 software, enter mobile device setting-wireless network setting, choose the wireless router to connect. start WiFi-104
software once more, device list interface as legend-2-2.
Completes the steps to connect to the additional router.
In this connection mode, to avoid the mobile device automatically connect to WiFi-104 after the setting has completed, please click
“workable WiFi-104" which under the mobile device "WiFi setting" and at the massage box please click "Forget this network"(apple iOS)
or "Cancel save" (SUMSUNG mobile phone is "forget") to cancel the save of WiFi-104 connection.
Repeat the ABC steps if you need connecting multiple WiFi-104 controller to this wireless router.
Note:
Available on the
App StoreANDROID APP ON
Google play
14:17 PM 100% 14:17 PM 100%
14:17 PM 100% 14:17 PM 100%
3 4
WiFi-104 LED Lighting Control System V1.1 WiFi-104 LED Lighting Control System V1.1
WiFi-104 LED Lighting Control System V1.1 WiFi-104 LED Lighting Control System V1.1
DIM
RGBW
RGB
CCT
CT
Scene
Scene 2
Scene 4
Back
Save
Play
Save
Play
Scene 3
Save
Play
Save
Scene 1Save
Play
Scene
Scene 2
Scene 4
Back
Save
Play
Save
Play
Scene 3
Save
Play
Save
Scene 1Save
Play
Scene
Scene 2
Scene 3
Scene 4
Back
Scene 1
Cancel OK
Scene name
Scene1Photo Setting
Cancel
Use Camera
Photo Library
Remove Photo
Scene
Turn on zone
Short press to play sceneLong press to save scene
synchronization for 12 zones
Turn off zone
Short press to turn off all zones
Short press to turn on all zones
Long press to turn on the key tone
Long press to turn off key tone
SCENEMATCH
MATCH
MATCH
NetworkBack
User setting
Wireless mode
Connect to existing LAN
Change SSID and password
14:17 PM 100%
User Setting
SSID
Password
WiFi-104-SSID-0
Ent the new Password
Back
Restore factory settings
Change the SSID name and password Apply
14:17 PM 100%
User Setting
Accoun
Change the account name and password
SSID
Password
-WiFi-104-0
Ent the new Password
Admin
Password
Restore factory settings
Change the SSID name and password
Cancel OK
Change the SSID password
Ent the NEW Password
Ent the NEW Password again
Back
14:17 PM 100%
Device List
2 3 4
5 6 7
1
8
10 11 129
WiFi-104-SSID-0
32:AA:3C:7E:B4:DA
Network
Zone
Connect to WiFi-104-SSID-1
14:17 PM 100%
DC5V-24VR
UN
+
B
R
G
+
B
R
G
511
511
331
511
511
331 331
511
511
331
511
511
331 331
+
B
R
G
+
B
R
G Zone 4 RGB
DC5V-24V
RU
N
121
121
121
121
121
121
121
121
121
121
121
121
121
121
ww
w 121
121cw Zone 3 CCTCCT
DC5V-24V
RU
N
121
121
121
121
121
121
121
121
121
121
121
121
121
121
ww
w
121
121 Zone 2 CTCT
DC5V-24V
RU
N
+
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
Zone 1 DIMDIM
DC5V-24V
+
B
R
G
W
+
B
R
G
W
+
B
R
G
W
+
B
R
G
W
RU
N
Zone 5 RGBW
Back to the main interface
Scene Background
Click to change the scene background
Play the scenes
Play the scenes Saving the current effect in this scene Change the scene background Save scene interface
7). Scene Interface
WiFi Network SSID Name and Password Setting
Wiring Diagram
5.
Remote operating Instructions6.
7.
In Device list interface, click “Network key” to enter Network interface, select “Change SSID and Password” (Click” ” ) to enter User Setting
interface. Typing new SSID name and password . Click “Apply” button on the top right corner of
the interface to save the changes.
(Min.: 8 characters, consist of 0-9, a-z and A-Z)
1.Device List interface 2.Network interface 3.Change SSID name interface
Restore the factory default setting
4.Change SSID password interface
[Note]: In direct connection of the WiFi-104 as a router. Please exit software after changed the SSID name and the password, then enter the mobile
device system setting to reconnect the WiFi-104
In additional wireless router connection, it only needs to click “ ” in Device List interface to search again the WiFi-104 controller after
changed SSID name.
[Note]: If you forget the WiFi network password, please simultaneously press : “ ” and “ ” more than 2s to restore the factory
default settings, so that can delete the WiFi network password (More details in page 3 [Restore factory settings/Delete password]
[Note]: WiFi-104 default to first zone, Master controller can choose whether connecting to LED lamps or not. If not, use wireless control to instead of the first zone.
Single color strip
Nature white /Warm white strip
Nature white + Warm white + Cold white strip
RGB strip
RGBW strip
1) Connect to the zones controller and LED lamps (the same way of WiFi-104 connection)
Short press learning key “ ” in WiFi-104 controller, long buzzer, then press any keys on M12 remote, long buzzer again, succeed learning.
Learning ID
Cancel ID
Long press learning key “ ” in WiFi-104 controller more than 6s, long buzzer, succeed cancel (cancel all learned remotes with WiFi-104 ).
( Long press to decrease brightness slowly,
under the mode of dimming or color temperature)
(in addition to the separate key closed zone)
14:17 PM 100% 14:17 PM 100% 14:17 PM 100%
7 8
Multiple partitions can be set to the same type or several types, such as all partitions are single color, can be set to DIM dimmer light type, such as dimmer, color temperature, RGB, and other types of lamps, different partition set to different types of lamps, the lamps connection diagram as follows:
M12WiFi-104
G 255R 255 B 255 W 255
W80% 80%
CONTROLLER1Long press to turn off single zone or group
ModeDevice SceneGroup On/off
2 3 4 5 6
7 8
RGBW
1RGB CT1 RGB
RGBW
10 11 129RGBW DIM
Group1 Group2 Group3
DIM
DIM RGBW RGBW
CT2
Mobile phone
( Long press to increase brightness slowly,
under the mode of dimming or color temperature)
WiFi-104 LED Lighting Control System V1.1 WiFi-104 LED Lighting Control System V1.1
2) Direct connection of WiFi-104 as router.
(Max 12 Zones)
R4-5A
R4-5A
R4-5A
R4-5A
R4-5AR4-5A
R4-5A
R4-5A
R4-5A
R4-5A
R4-5A
zone 3
zo
ne 4
zo
ne 5
zone 6
zone 7zone 8
zone
9
zo
ne 1
0zo
ne 1
1
zone 12
zone 2
zone 1
(Max 12 Zones)
R4-5A
R4-5A
R4-5A
R4-5A
R4-5AR4-5A
R4-5A
R4-5A
R4-5A
R4-5A
R4-5A
zone 3
zo
ne 4
zo
ne 5
zone 6
zone 7zone 8
zone
9
zo
ne 1
0zo
ne 1
1
zone 12
zone 2
zone 1
(Max 12 Zones)
R4-5A
R4-5A
R4-5A
R4-5A
R4-5AR4-5A
R4-5A
R4-5A
R4-5A
R4-5A
R4-5A
zone 3
zo
ne 4
zo
ne 5
zone 6
zone 7zone 8
zone
9
zo
ne 1
0zo
ne 1
1
zone 12
zone 2
zone 1
3) Connect by a router
9. Warranty Agreement
1. The product shall be installed and serviced by a qualified person.
2. This product is non-waterproof. Please avoid the sun and rain. When installed outdoors please
ensure it is mounted in a water proof enclosure.
3. Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.
4. Please check if the output voltage of any LED power supplies used comply with the working voltage of the product.
5. Please ensure that adequate sized cable is used from the controller to the LED lights to carry the current.
Please also ensure that the cable is secured tightly in the connector to avoid the accidents due to overheat and
poor contact on the wire.
6. Ensure all wire connections and polarities are correct before applying power to avoid any damages to the LED lights.
7. If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.
1. We provide lifelong technical assistance with this product:
A 5-year warranty is given from the date of purchase. The warranty is for free repair or replacement and covers
manufacturing faults only.
For faults beyond the 5-year warranty we reserve the right to charge for time and parts.
2. Warranty exclusions below:
Any man-made damages caused from improper operation, or connecting to excess voltage and overloading.
The product appears to have excessive physical damage.
Damage due to natural disasters and force majeure.
Warranty label, fragile label and unique barcode label have been damaged.
The product has been replaced by a brand new product.
3. Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
We shall not be liable for any incidental or consequential damages for breach of any stipulation in this warranty.
4. Any amendment or adjustment to this warranty must be approved in writing by our company only.
★ This manual only applies to this model. We reserves the right to make changes without prior notice.
8. Attention
[Note] Unlimited zone receiver R4-5A/R4-CC can be installed for each zone within effective range.
A B
A B
4) Remote distance reference
WiFi-104Master controller
R4-5A/R4-CCSlave controller
M12 Remote
50m
30m
100m100m
Wireless Router
Mobile phone Router
[Note]: The following distance is measured at distance open environment, in an open environment testing wireless distance will be reduced,
please refer to our actual test distance before installation.
Update Time: 2014.04.18
9 10
WiFi-104 LED Lighting Control System V1.1 WiFi-104 LED Lighting Control System V1.1