VacClad-W Type VCP-W 5 and 15 kV, 36-inch Wide Switchgear Components · · 2009-08-28Includes mounting bracket, switch and wiring harness. Note: ... With One Type ABB SCV or ITI
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
2. This book identifies those replacement parts which are most frequently ordered and which are readily available. These parts should be ordered by style number or catalog number to speed up processing and delivery.
This Renewal Parts Data applies to the housing parts only. For the vacuum circuit breaker parts, refer to Price List 33-729.
Customer Ordering Instructions
1. Specify the part by style or catalog number, description and quantity required.
2. Contact your local Cutler-Hammer sales office or authorized Cutler-Hammer distributor.
Distributor Ordering Instructions
1. Specify quantity and enter the order on Vista by style or catalog number. Contact the Aftermarket Products Center (APC) in Greenwood, SC at 1-800-345-4072 when order-ing relay covers.
2. Contact APC for availability at 1-800-345-4072.
WARNING!
HAZARDOUS VOLTAGE WILL CAUSE SEVERE INJURY OR DEATH. TURN OFF POWER SUPPLY TO EQUIPMENT BEFORE WORKING ON IT.
RP02204001E For more information visit:
www.cutler-hammer.eaton.com
Renewal Parts
Effective: July 2002 Page
3
VacClad-W Type VCP-W 5 and 15 kV, 36-inch Wide Switchgear Components
Front Panel Components
Typical Front Panel
Typical Front Panel
E22 and Minalite Bulbs
Minalite Bulb
E22 Bulb (Incandescent)
E22 Bulb (LED)
Table 1. E22 and Minalite Bulbs
Table 2. Blank Front Panel (Includes Hinges and Standard Door Latches)
36-inch Upper Panel with Left Hand Hinge36-inch Upper Panel with Right Hand Hinge36-inch Lower Panel with Left Hand Hinge (1200A Breaker)36-inch Lower Panel with Right Hand Hinge (1200A Breaker)
A1000LA1000RB1000LB1000R
36-inch Lower Panel with Left Hand Hinge (When 2000/3000A Breaker Located in Lower Compartment)
B2000L
36-inch Lower Panel with Right Hand Hinge (When 2000/3000A Breaker Located in Lower Compartment)
B2000R
36-inch Lower Panel with Left Hand Hinge (When 3000A Breaker Located in Upper Compartment)
B3000L
36-inch Lower Panel with Left Hand Hinge (No Grille)36-inch Lower Panel with Right Hand Hinge (No Grille)
B0000LB0000R
W2 and Series 24 Handles
W2 and Series 24 Handles
Door Latch Assemblies
Door Latch Assemblies
Relay Cover
Relay Cover
Note:
Order by description. Provide type of relay and style number.
Table 3. Handles and Assemblies
Description StyleNumber
W2 HandlesPistol GripOval (T-Shape)Round
310C624H02501B787H01310C624H01
Series 24 HandlesPistol GripOval (T-Shape)Round
02000-1202000-1102000-10
Door Latch AssembliesGrayBlack
8244A12G018346A76H01
Pistol Grip
Oval (T-Shape)
Round
Gray Black
For more information visit:
www.cutler-hammer.eaton.com
RP02204001E
Renewal Parts
Page
4
Effective: July 2002
VacClad-W Type VCP-W 5 and 15 kV, 36-inch Wide Switchgear Components
Breaker Pan Assembly
Breaker Pan Assembly Parts
Table 4. Breaker Pan Assembly Parts
1
When a Pan Assembly space heater is required, this is where it is mounted. Refer to Space Heater
Table 35
on
Page 17
for ratings and style numbers.
2
Designed for Kirk Key type F (one or two locks) interlock with zero bolt projection. Key lock not included.
3
Padlock not included.
4
Includes the Left Hand and Right Hand Stationary Rail Assembly, the appropriate Levering-in Assembly and the Stationary Secondary Contacts.
5
Includes mounting bracket, switch and wiring harness.
VacClad-W Type VCP-W 5 and 15 kV, 36-inch Wide Switchgear Components
Breaker Pan Assembly Parts
Pan Assembly
1
Kirk Key Interlock Assembly
3
Padlock Interlock Assembly
4
Levering-in Assembly
MOC Switch Assembly
2
Stationary Secondary Contacts and Wiring Harness
TOC Switch Assembly
2
Stationary Rail Assembly
Secondary Contact Slide Assembly
1
Includes the Left Hand and Right Hand Stationary Rail Assembly, the appropriate Levering-in Assembly and the Stationary Secondary Contacts.
2
Includes mounting bracket, switch and wiring harness.
3
Designed for Kirk Key type F (one or two locks) interlock with zero bolt projection. Key lock not included.
4
Padlock not included.
Mounting Bracket
WiringHarness
MOCSwitch
TOC Switch
Wiring Harness
MountingBrackets
For more information visit:
www.cutler-hammer.eaton.com
RP02204001E
Renewal Parts
Page
6
Effective: July 2002
VacClad-W Type VCP-W 5 and 15 kV, 36-inch Wide Switchgear Components
Breaker Cubicle Components
Stab Molding Assembly
1
CT Barrier Mounting Kit
Shutter Assembly
Table 5. Stab Molding Assembly
1
1
Each style provides for three poles of a breaker.
Bus Side
is defined as the bottom poles of a breaker mounted in the top location, and the top poles of a breaker mounted in the bottom loca-tion.
Line Side
is defined as the top poles of a breaker mounted in the top location, and the bot-tom poles of a breaker mounted in the bottom location. Glass polyester insulation is standard.
RP02204001E For more information visit: www.cutler-hammer.eaton.com
Renewal PartsEffective: July 2002 Page 9
VacClad-W Type VCP-W 5 and 15 kV, 36-inch Wide Switchgear Components
Auxiliary Drawer — ITI Transformers
ITI Line-to-Line PT Plate Assemblies
ITI Line-to-Ground PT Plate Assemblies
Table 14. VCP-W Line-to-Line Transformers Mounting Plate Assembly — Including PTs and Stabs — ITI Voltage Transformers (Two Primary Fuses per Transformer)
Table 15. Line-to-Line Transformers (Two Primary Fuses per Transformer) Includes PT Only — Fuses, Fuse Clips, and the Mounting Plate Assembly Are Not Included
Table 16. VCP-W Line-to-Ground Transformers Mounting Plate Assembly — Including PTs and Stabs — ITI Voltage Transformers (One Primary Fuse per Transformer)
Table 17. Line-to-Ground Transformers (One Primary Fuse per Transformer) Includes PT Only — Fuses, Fuse Clips, and the Mounting Plate Assembly Are Not Included
Note: Please contact the factory for part numbers and pricing for replacement parts included in the ITI mounting plate assemblies.
SystemLine-to-Line Volts
ITIType
Ratio StyleNumber
2400 4200 4800 7200
PTW3PTW3PTW5PTW5
2400/120 4200/120 4800/120 7200/120
1C17638G011C17638G021C17639G011C17639G02
8400125001320014400
PTW5PTW5PTW5PTW5
8400/12012000/12013200/12014400/120
1C17639G031C17639G041C17639G051C17639G06
SystemLine-to-Line Volts
ITIType
Ratio StyleNumber
2400 4200 4800 7200
PTW3PTW3PTW5PTW5
2400/120 4200/120 4800/120 7200/120
3A40266H013A40266H023A40266H033A40266H04
8400125001320014400
PTW5PTW5PTW5PTW5
8400/12012000/12013200/12014400/120
3A40266H053A40266H063A40266H073A40266H08
SystemLine-to-Line Volts
ITIType
Ratio StyleNumber
2400 4200 4200 4800
PTW3PTW3PTW3PTW5
2400/120 4200/120 2400/120 4800/120
1C17613G011C17613G021C17613G04Contact Factory
7200 7200 8400 8400
PTW5PTW5PTW5PTW5
7200/120 4200/120 8400/120 4800/120
1C17654G011C17614G011C17654G021C17614G02
12500125001320013200
PTW5PTW5PTW5PTW5
12000/120 7200/12013200/120 7620/120
1C17654G031C17614G031C17654G041C17614G04
1440014400
PTW5PTW5
14400/120 8400/120
1C17654G051C17614G05
SystemLine-to-Line Volts
ITIType
Ratio StyleNumber
2400 4200 4200 4800
PTW3PTW3PTW3PTW5
2400/120 4200/120 2400/120 4800/120
3A40267H013A40267H023A40267H03Contact Factory
7200 7200 8400 8400
PTW5PTW5PTW5PTW5
7200/120 4200/120 8400/120 4800/120
3A40267H053A40267H063A40267H073A40267H08
12500125001320013200
PTW5PTW5PTW5PTW5
12000/120 7200/12013200/120 7620/120
3A40267H093A40267H103A40267H113A40267H12
1440014400
PTW5PTW5
14400/120 8400/120
3A40267H133A40267H14
For more information visit: www.cutler-hammer.eaton.com RP02204001E
Renewal PartsPage 10 Effective: July 2002
VacClad-W Type VCP-W 5 and 15 kV, 36-inch Wide Switchgear Components
Auxiliary Drawer
Control Power Transformer Basic Chassis 1 Control Power Transformer Control Power Transformer Secondary Breaker (2-Pole)
Fuse Link Extension Kit 2
Table 18. Control Power Transformers Primary Fuses
Table 19. Auxiliary Drawer Chassis and Extension Kits
1 The Control Power Transformer Chassis does not include the control power transformer, the primary fuses or the secondary breaker.
2 Required for Control Power Transformer primary fuses that are 8.12 and 11.50 inches in length.
Table 20. Control Power Transformers Secondary Breaker (2-Pole)
Table 21. Control Power Transformers 3
3 All Control Power Transformers have 1± 7.5% Primary Tap and a 120/240 volt secondary.
Rating Fuse Size in Inches Style NumberLength Diameter
5.5 kV – 3.0E 5.5 kV – 5.0E 5.5 kV – 10.0E
8.12 8.12 8.12
1.621.621.62
677C453G07677C453G01677C453G04
8.3 kV – 3.0E 8.3 kV – 5.0E 8.3 kV – 10.0E
11.5011.5011.50
1.621.621.62
677C453G08677C453G02677C453G05
15.5 kV – 1.0E15.5 kV – 1.5E
11.5011.50
1.621.62
5981C07G05677C452G10
15.5 kV – 3.0E15.5 kV – 5.0E
16.1216.12
1.621.62
677C453G09677C453G03
Description StyleNumber
Control Power Transformer Basic Chassis 1Fuse Link Extension Kit 2
6511C30G048276A95G01
CPT(kVA Rating)
BreakerRating
Catalog Number
51015
255080
GHC2025GHC2050GHC2080
RatedPrimaryVoltage
kVARating
RecommendedFuse Rating
Style Number
ABB 2400 2400 2400
51015
5.5 kV – 5.0E 5.5 kV – 10.0E 5.5 kV – 10.0E
506A004H01506A004H02506A004H03
4160 4160 4160
51015
5.5 kV – 3.0E 5.5 kV – 5.0E 5.5 kV – 5.0E
506A004H05506A004H06506A004H07
4800 4800 4800
51015
8.3 kV – 3.0E 8.3 kV – 3.0E 8.3 kV – 5.0E
506A004H25506A004H26506A004H27
7200 7200 7200
51015
8.3 kV – 3.0E 8.3 kV – 3.0E 8.3 kV – 3.0E
506A004H13506A004H14506A004H15
8400 8400 8400
51015
15.5 kV – 3.0E15.5 kV – 3.0E15.5 kV – 3.0E
506A004H28506A004H29506A004H30
124701247012470
51015
15.5 kV – 3.0E15.5 kV – 1.5E15.5 kV – 3.0E
506A004H17506A004H18506A004H19
132001320013200
51015
15.5 kV – 1.0E15.5 kV – 1.5E15.5 kV – 3.0E
506A004H21506A004H22506A004H23
138001380013800
51015
15.5 kV – 1.0E15.5 kV – 1.0E15.5 kV – 3.0E
506A004H31506A004H32506A004H33
ITI 2400 2400 2400
51015
5.5 kV – 5.0E 5.5 kV – 10.0E 5.5 kV – 10.0E
3A39136H013A39136H023A39136H03
4160 4160 4160
51015
5.5 kV – 3.0E 5.5 kV – 5.0E 5.5 kV – 5.0E
3A39136H053A39136H063A39136H07
4800 4800 4800
51015
8.3 kV – 3.0E 8.3 kV – 3.0E 8.3 kV – 5.0E
3A39136H253A39136H263A39136H27
7200 7200 7200
51015
8.3 kV – 3.0E 8.3 kV – 3.0E 8.3 kV – 3.0E
3A39136H133A39136H143A39136H15
8400 8400 8400
51015
15.5 kV – 3.0E15.5 kV – 3.0E15.5 kV – 3.0E
3A39136H283A39136H293A39136H30
124701247012470
51015
15.5 kV – 3.0E15.5 kV – 1.5E15.5 kV – 3.0E
3A39136H173A39136H183A39136H19
132001320013200
51015
15.5 kV – 1.0E15.5 kV – 1.5E15.5 kV – 3.0E
3A39136H213A39136H223A39136H23
138001380013800
51015
15.5 kV – 1.0E15.5 kV – 1.0E15.5 kV – 3.0E
3A39136H313A39136H323A39136H33
RP02204001E For more information visit: www.cutler-hammer.eaton.com
Renewal PartsEffective: July 2002 Page 11
VacClad-W Type VCP-W 5 and 15 kV, 36-inch Wide Switchgear Components
Auxiliary Drawer
Drawout Fuse Basic Chassis 1
Fuse Link Extension Kit 2
Fuse Barrier 3
Fuse Stab Top Contact
Fuse Stab Bottom Contact
Table 22. Auxiliary Drawer Parts
1 Basic chassis does not include the high voltage fuse clips, fuses or the required key interlocking with the secondary load breaker. The chassis is designed for a Kirk Key type F interlock with zero projection. The chassis will accommodate the fuses listed below and the Voltage Transformer fuses listed on Page 8 and the Control Power Transformer fuses listed on Page 10.
2 Required for drawout fuses that are 14 and 16 inches in length.3 Required one per fuse.
Table 23. Primary Fuses 4
4 See Primary Fuses photo on Page 8.
Description StyleNumber
Drawout Fuse Basic Chassis 1 6511C24G04
Fuse Link Extension Kit 2 3A38293G01
Fuse Barrier 3Used with 11 or 14-inch fusesUsed with 16-inch fuses
8244A04G018244A04G02
Fuse Stab Top Contact 8276A25H01
Fuse Stab Bottom Contact 8276A27H02
Rating Fuse Size in Inches StyleNumberLength Diameter
5.5 kV – 15E 5.5 kV – 20E 5.5 kV – 25E
11.5011.5011.50
2.002.002.00
678C240G04678C240G05678C240G06
8.3 kV – 15E 8.3 kV – 20E 8.3 kV – 25E
14.0014.0014.00
2.002.002.00
678C240G07678C240G08678C240G09
15.5 kV – 10E 16.12 1.62 677C453G06
For more information visit: www.cutler-hammer.eaton.com RP02204001E
Renewal PartsPage 12 Effective: July 2002
VacClad-W Type VCP-W 5 and 15 kV, 36-inch Wide Switchgear Components
Left Hand Stationary Rail AssemblyRight Hand Stationary Rail Assembly
6511C25G016511C26G01
For more information visit: www.cutler-hammer.eaton.com RP02204001E
Renewal PartsPage 14 Effective: July 2002
VacClad-W Type VCP-W 5 and 15 kV, 36-inch Wide Switchgear Components
Bus Compartment
Bus Support Main Bus Splice Plate
Table 26. Bus Riser Support Kit(Includes Hardware and Hardware Insulator Cap)
Table 27. Bus Riser Support Parts
Table 28. Bus Support
Table 29. Bus Support Snubbers
Table 30. Main Bus with Required Drilling and Fluidized Insulation1200A = One .250 x 6.00 or One .250 x 4.002000A = One .500 x 6.003000A = Two .375 x 6.00 (All Bus Bars are 34 inches in Length)
Insulator Spacer/Hardware KitHardware Insulator Cap
8346A75G013A37452H01
Description StyleNumber
Glass Polyester 5 and 15 kVPorcelain 15 kV
6355C58H016355C77G01
Description StyleNumber
For .250-inch x 6-inch bus — 1200AFor .250-inch x 4-inch bus — 1200AFor .500-inch x 6-inch bus — 2000AFor Two .375-inch x 6-inch bus — 3000A
6362C41H011C17655H016359C19H016359C20H01
Requiredper Unit
AmpereRating
Thickness in Inches
Type ofPlating
StyleNumber
3336
1200120020003000
.250 x 6.00
.250 x 4.00
.500 x 6.00
.375 x 6.00
TinTinTin Tin
509B044H011C18370H04509B044H02509B044H03
3336
1200120020003000
.250 x 6.00
.250 x 4.00,500 x 6.00.375 x 6.00
SilverSilverSilverSilver
509B044H061C18370H01509B044H07509B044H08
Description Style Number
6-inch Bus.250-inch without Inserts.250-inch with Inserts
8080A40H018080A47G01
.250-inch Spacer
.375-inch Spacer8080A38H018080A39H01
4-inch Bus.250-inch without Inserts.250-inch with Inserts.250-inch Spacer
3A39347H053A39347G021C16096H10
RP02204001E For more information visit: www.cutler-hammer.eaton.com
Renewal PartsEffective: July 2002 Page 15
VacClad-W Type VCP-W 5 and 15 kV, 36-inch Wide Switchgear Components
Bus Compartment
Main Bus or Butt Joint Boot
Breaker Stud Boot Bus Side and Closure
Breaker Stud Boot Line Side and Closure
Copper to Bus Run Boot
90º Turn Lap Joint Boot
User Cable Termination Boot
Closure
Closure
Table 32. Boots
1 Three sets required per breaker.
Table 33. Boots
Note: Please note that no cable termination boots for 1200A .25-inch x 4-inch bus are available at this time.
Description StyleNumber
Main Bus or Butt Joint Boot 1200/2000A, 1/2/3 Way, 6-inch Bus1200/2000A, 4 Way, 6-inch Bus 3000A, 6-inch Bus1200A, 4 Way, 4-inch Bus
1C14751H011C14751H021C14759H011C18509H01
Breaker Stud Boot Bus Side and Closure1200A Stud1200A Closure
6359C17H01 1
6359C90H01 1
2000A Stud2000A Closure
6359C66H01 1
6359C97H01 1
3000A Stud3000A Closure
6359C99H01 1
6359C98H01 1
Breaker Stud Boot Line Side and Closure1200A Stud1200A Closure
6531C80H01 1
6531C81H01 1
2000A Stud 2000A Closure
6531C82H01 1
6531C83H01 1
3000A Stud3000A Closure
6359C99H01 1
6359C98H01 1
Description StyleNumber
Copper to Bus Run Boot1200A (RH)1200A (LH)1200A (CTR)
6438C25H016438C26H016438C27H01
2000A (RH)2000A (LH)2000A (CTR)
6438C32H016438C33H016438C34H01
3000A (RH)3000A (LH)3000A (CTR)
6438C28H016438C29H016438C30H01
90º Turn Lap Joint Boot1200A2000A
6364C01H016364C02H01
User Cable Termination Boot1200A Single Row of Terminals — Solid Copper Riser and Terminal Adapter1200A Double Row of Terminals — Solid Copper Riser and Terminal Adapter2000A Single Row of Terminals — Solid Copper Riser and Terminal Adapter2000A Double Row of Terminals — Solid Copper Riser and Terminal Adapter
SC00471H01SC00472H01SC00471H02SC00472H02
1200A 1 and 2 Cables Per Phase-Bolted Terminal Adapter1200A 3 Cables Per Phase-Bolted Terminal Adapter2000A 1 and 2 Cables Per Phase-Bolted Terminal Adapter2000A 3 Cables Per Phase-Bolted Terminal Adapter
1C17370H011C17371H011C17370H021C17371H02
For more information visit: www.cutler-hammer.eaton.com RP02204001E
Renewal PartsPage 16 Effective: July 2002
VacClad-W Type VCP-W 5 and 15 kV, 36-inch Wide Switchgear Components
Maintenance Tool
Portable Lifting Crane
Accessories and Miscellaneous Parts
Levering Crank with Clutch
Rail Extensions
Breaker Ramp Assembly
Breaker Lifting Yoke
Rail Clamps
Dockable Dolly
Table 34. Accessories and Miscellaneous PartsDescription Style
RP02204001E For more information visit: www.cutler-hammer.eaton.com
Renewal PartsEffective: July 2002 Page 17
VacClad-W Type VCP-W 5 and 15 kV, 36-inch Wide Switchgear Components
Space Heater
Test Jumper 1
Test Cabinet 2
Capacitor Trip
Accessories and Miscellaneous Parts
Table 35. Space Heaters
Table 36. Accessories and Miscellaneous Parts
1 Used with internal power from breaker.2 Used with a separate power source.
Volts Watts Style Number
125250
250250
3614A50H013614A50H02
125250
95100
3614A50H043614A50H05
Description StyleNumber
Test Jumper 1
Used with internal power from breaker 6526C23G01
Test Cabinet 2
Any DC Close and Trip Combination — StandardAny AC/DC Close and Any DC Trip Separate — Standard
8346A28G018346A28G02
120, 240V AC Close, Capacitor TripAny DC Close, Trip Combination Separate Motor
8346A28G038346A28G04
Capacitor Trip120V240V
CTD-2CTD-4-240
For more information visit: www.cutler-hammer.eaton.com RP02204001E
Renewal PartsPage 18 Effective: July 2002
VacClad-W Type VCP-W 5 and 15 kV, 36-inch Wide Switchgear Components
Technology Upgrades
New Replacement Front PanelsWith a new replacement front panel, it is now possible to have state-of-the-art solid-state metering and relaying, with the capability to communicate to a PowerNet system. This upgrade also eliminates the need to cut and patch existing panels or replace the complete line-up.
Medium voltage switchgear that was manufactured between 1963 and the present can now be upgraded with solid-state meters and relays to monitor and protect your distribution system. This replacement front panel upgrade capability applies to:
New front panels come with devices mounted and wired (See Optional Solid-State Meters and Relays on Page 19). Wire markers and wiring diagrams for each hinge panel are provided for ease of installation. The existing panel is removed, the new panel is set in place, and the solid-state devices are wired into the switchgear unit. Communica-tions can then be tied to PowerNet via a twisted pair.
For availability and ordering instructions, contact the Aftermarket Products Center (APC) in Greenwood, SC 1-800-345-4072.
New VCP-W Front Panelwith DT3000 and IQ DP-4000
Older VCP-W Front Panelwith Analog Metering andInduction Disk Type Relays
RP02204001E For more information visit: www.cutler-hammer.eaton.com
Renewal PartsEffective: July 2002 Page 19
VacClad-W Type VCP-W 5 and 15 kV, 36-inch Wide Switchgear Components
Optional Solid-State Meters and Relays
DT3000
DT3000
The DT3000 is a true rms sensing, diagnostic programmable medium voltage trip unit. It is designed to pro-vide a wide range of circuit protection, monitoring and control capabilities for utility, industrial and commercial electric power distribution systems. It provides unparalleled protection and coordination for medium voltage switchgear. Only one trip per unit is required for each three-phase circuit. Current monitoring and operator-selectable protective functions are integral to each trip unit. A single trip unit replaces some 30 styles of conventional electromagnetic and induction disk overcurrent relays.
MP-3000
MP-3000
The MP-3000 motor protection relay is a multi-functional microprocessor-based protective relay for the protection of any size motor at all voltage levels. It is most commonly applied on medium voltage starters and on critical or larger motors. The MP-3000 relay is a current only device that provides complete and reliable motor protection, monitoring and starting control functions.
IQ DP-4000
IQ DP-4000
The IQ DP-4000 monitors the following parameters:
■ Phase currents.■ Phase L-L and L-N voltages.■ Power and energy:
❑ Real❑ Reactive❑ Apparent
■ Demand power and current.■ % Total Harmonic Distortion (THD).
The meter also provides several pro-tective alarming functions as well as provides minimum and maximum val-ues of metered parameters. Enhanced features of the IQ DP-4000 include:
AlarmingAlarming is available via communica-tions, LED at device, or optional relay output contacts. Alarms can be set for over- and undervoltage, current and voltage phase loss, and voltage unbal-ance to alarm on potentially costly voltage and current conditions.
FP-5000
FP-5000
The FP-5000 Feeder Protection relay provides complete three phase and ground overcurrent and voltage pro-tection plus metering in a single, com-pact drawout case. It may be used as primary protection on feeders, mains and tie circuit breaker applications, and as a backup protection for trans-formers, high voltage lines and differ-ential protection. Protection functions are well suited for main and distribu-tion feeder circuit applications. Pro-grammable logic control functions make the FP-5000 relay ideally suited for main-tie-main and main 1/main 2 transfer schemes. The Zone Interlock-ing feature can be utilized for bus pro-tection instead of an expensive and complicated bus differential (87B) scheme. The FP-5000 works directly with the Cutler-Hammer DT-3000 and Digitrip MV relays. New breaker failure logic provides faster remote backup clearing times for stuck breaker opera-tion. The FP-5000 provides trip and close circuit monitoring and alarming features. It continually monitors the complete trip and close circuits for continuity and readiness to trip. Open and close pushbuttons are conve-niently located on the front of the relay for local breaker operation. Loss-of-vacuum monitoring is activated when the breaker is open. Residual current is monitored and alarmed if detected.
Renewal PartsPage 20 Effective: July 2002
VacClad-W Type VCP-W 5 and 15 kV, 36-inch Wide Switchgear Components
The IQ Analyzer is a complete solution for users who want to monitor all aspects of their electrical distribution system. Based on input from custom-ers and consultants, the IQ Analyzer has been improved to provide:
■ Extensive metering.■ Power quality analysis.■ Remote input monitoring.■ Control relaying.■ Analog inputs/outputs.■ Communications capability.
Its high performance metering com-plies with the rigid ANSI C12.16 Class 10 accuracy specification for revenue meters, provides quality true rms readings through the 50th harmonic, accurately measures nonsinusoidal waveforms up to a 3.0 crest factor, and displays even and odd multiples of the fundamental current and volt-age through the 50th harmonic. Both magnitude and phase angle of the harmonics are displayed. The unique operator interface, which includes a reverse mode LCD display with LED illumination, easy-to-use Meter Menu screens and detailed Analysis screens,
is designed to allow a wealth of real time and recorded information to be accessed easily by an operator. All programming can be accomplished through the faceplate or the communi-cations port. The on-line Help feature provides useful information on device operation, programming and trouble-shooting.
IQ 200
IQ 200
The IQ 200’s compact size and flexible mounting capabilities make it perfectly suited for machine control panels such as panelboard and switchboard mains and feeders, low voltage metal-enclosed switchgear feeders, motor control centers, and especially for individual load monitoring. The base module can be display mounted, panel-mounted, DIN-rail mounted or side mounted. The display fits into a standard 1/4 DIN cutout, and for retrofit applications also mounts in a 100 mm ANSI cutout. One IQ 200 pro-vides an alternative to an assortment of individually wired and mounted ammeters, voltmeters, ammeter and voltmeter switches, watt-meters, var-meters, power factor meters, frequency meters, watt hour and demand meters.
IQ 300
IQ 300
The new IQ 300 provides extensive multi-function metering capabilities along with a large LCD display with an LED backlight. The IQ 300 display fits into the standard IQ cutout providing customers a simple upgrade path. The new meter directly measures and calculates up to 51 different electrical system values and meets the rigid ANSI C12.16 accuracy requirements for energy measurements.
Eaton CorporationCutler-Hammer business unit1000 Cherrington ParkwayMoon Township, PA 15108-4312USAtel: 1-800-525-2000www.cutler-hammer.eaton.com