Using KINEROS2 outside of AGWA Why? add element types not supported by AGWA (pond, pipe, urban, inject) subdivide hillslope (plane) elements according to land use, soil type incorporate data not in the GIS or not supported by AGWA, such as field measurements Where? <workspace>\<delineation name>\<discretization name>\simulations\<simulation name>\ e.g. D:\GIS\Walnut_Gulch\LH4\lh4d4\simulations\lh4s1\
20
Embed
Using KINEROS2 outside of AGWA...AGWA Version: 20120323! Simulation Creation Date: 3/13/2015 12:54:05 PM! Watershed: lh4d4! Total Watershed Area: 44026square meters! Contributing Source
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Using KINEROS2 outside of AGWA
Why?add element types not supported by AGWA (pond, pipe, urban, inject)subdivide hillslope (plane) elements according to land use, soil typeincorporate data not in the GIS or not supported by AGWA, such as field measurements
Parameter File – GLOBAL Block! File Info! AGWA Version: 20120323! Simulation Creation Date: 3/13/2015 12:54:05 PM! Watershed: lh4d4! Total Watershed Area: 44026square meters! Contributing Source Area: 11008 square meters! DEM Cell Size: 1! Number of Planes: 8! Number of Channels: 3! LandCover: nlcd2006! Soils: ssurgo! End of File Info
theta rel.sat.surface initial water content = 0.0824 0.2000estimated wilting point water content = 0.1035 0.1285estimated field capacity = 0.1898 0.38993-parameter soil infiltration: alpha = 0.8000
Peak flow = 0.2289294 cu m /s (57.03875 mm/hr) at 40.0 min
Peak sediment discharge = 7.288827 kg/s at 40.0 min
Water balance Sediment balance-------------------------------------- ------------------------
Rain: 554.4035 cu m 38.37000 mm In: 0.000 kgInflow: 0.0000 cu m 0.00000 mm Deposited: 0.000 kgInfilt: 317.3462 cu m 21.96338 mm Soil Loss: 6411.587 kgStored: 0.0000 cu m 0.00000 mm Out: 6415.148 kg
Out: 235.3884 cu m 16.29112 mm Error: 0.30 %
Parameter File – PRINT = 2Elapsed Time Rainfall Outflow Outflow Total Sediment
Rainfall File! User-defined storm hyetograph computed using the SCS! Methodology with a type II distribution.! Storm generated for the "d1k1" watershed on! 6/13/2013 10:50:53 AM.! Duration = 1 hours
The format of the run file depends on whether the program is run in "batch" mode as in AGWA or in "prompt" mode
Batch ModeRun KINEROS2 (k2.exe) from a Command Prompt windowStart Menu -> All Programs -> Accessories -> Command Prompt)
k2 -b runfile[kin.fil]
Prompt ModeDouble clicking k2.exe from a file browser like Windows Explorer
Run File – Batch Modelh4s1.par,1a1h.pre,lh4s1.out,"",120,1,Y,Y,,Y,N
parameter filerainfall fileoutput fileTitle, must be enclosed in double quotesduration(min)time step(min)Courant adjustment?sediment?multiplier file (none in this case)tablular summary?not used
Multiplier File
Saturated hydraulic conductivity, KS
Manning/Chezy
Coefficient of variation of KS, CV
Capillary drive parameter, G
Interception
Soil cohesion parameter
Rain splash parameter
Run File – Prompt ModeThe run file for prompt mode has the same entries as for batch mode, with each entry on a separate line:
lh4s1.par1a1h.prelh4s1.out
1201YY
Y
The run file must be named “kin.fil” – if the file is not present the program will provide prompts to type in the information.