TIÊU CHUẨN MỚI THÁNG 01/2017 - lib.iuh.edu.vnlib.iuh.edu.vn/wp-content/uploads/2017/06/Bantin_Tieuchuan_01_2017.pdftiÊu chuẨn quỐc gia (tcvn) V ậ t li ệu xây dự ng

TRƯỜNG ĐH CÔNG NGHIỆP TP. HỒ CHÍ MINH

TRUNG TÂM THÔNG TIN – THƯ VIỆN

TIÊU CHUẨN MỚI THÁNG 01/2017

TIÊU CHUẨN QUỐC GIA (TCVN) ....................................................................... 1

Vật liệu xây dựng .................................................................................................... 1

TIÊU CHUẨN NƯỚC NGOÀI ................................................................................ 2

Công nghệ thông tin ................................................................................................ 2

Điện – Điện tử- Thiết bị điện ................................................................................... 2

Cáp điện ................................................................................................................... 4

Vận tải – Đường bộ – Đường sắt ............................................................................. 5

Máy bay và Vũ trụ ................................................................................................... 5

Cơ khí – Chế tạo ...................................................................................................... 6

Thiết bị nông nghiệp ............................................................................................... 7

Luyện kim – Sản phẩm kim loại .............................................................................. 7

Xây dựng – Vật liệu xây dựng ................................................................................ 8

Hóa học ................................................................................................................... 9

Đo lường và phép đo, hiện tượng vật lý .............................................................. 10

Chất dẻo – Cao su .................................................................................................. 10

Dầu mỏ - Nhiên liệu sinh học rắn ....................................................................... 11

Gốm sứ ............................................................................................................... 11

Công nghệ da ....................................................................................................... 11

Dệt ...................................................................................................................... 11

Gỗ - Giấy ............................................................................................................ 12

Sơn và vecni ............................................................................................ 12

Vi sinh vật học .................................................................................................... 13

Thiết bị công nghiệp thực phẩm - Thiết bị vận chuyển ....................................... 13

Nhãn an toàn .......................................................................................................... 13

An toàn – Môi trường ....................................................................................... 13

Y tế - Chăm sóc sức khỏe .................................................................................... 14

Đồ gia dụng - Đồ chơi ........................................................................................ 14

Thử nghiệm .......................................................................................................... 15

Vấn đề chung, thuật ngữ, hướng dẫn quản lý ..................................................... 15

TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4

TIÊU CHUẨN QUỐC GIA (TCVN)

Vật liệu xây dựng Trở về đầu trang

1 TCVN 11524:2016 Tấm tường rỗng bê tông đúc sẵn theo công nghệ

đùn ép.

29

TIÊU CHUẨN NƯỚC NGOÀI

Công nghệ thông tin Trở về đầu trang

2 BS EN 50667:2016 Information technology. Automated infrastructure

management (AIM) systems. Requirements, data

exchange and applications

42

3 BS ISO/IEC 26557:2016 Software and systems engineering. Methods and

tools for variability mechanisms in software and

systems product line

62

4 ISO/TS 13399-305:2017 Cutting tool data representation and exchange --

Part 305: Creation and exchange of 3D models --

Modular tooling systems with adjustable

cartridges for boring

73

5 ISO/IEC 23000-

15:2016/Amd 1:2017

Implementation guidelines for MP-AF 49

6 ISO/IEC 24779-4:2017 Information technology -- Cross-jurisdictional and

societal aspects of implementation of biometric

technologies -- Pictograms, icons and symbols for

use with biometric systems -- Part 4: Fingerprint

applications

37

7 ISO/IEC 23005-7:2017

Replace: ISO/IEC

23005-7:2014

Information technology -- Media context and

control -- Part 7: Conformance and reference

software

44

8 ISO/IEC 19752:2017

Replace: ISO/IEC

19752:2004; ISO/IEC

19752:2004/Cor 1:2012

Information technology -- Office equipment --

Method for the determination of toner cartridge

yield for monochromatic electrophotographic

printers and multi-function devices that contain

printer components

28

9 ISO/IEC 19798:2017

Replace: ISO/IEC

19798:2007

Information technology -- Office equipment --

Method for the determination of toner cartridge

yield for colour printers and multi-function

devices that contain printer components

19

10 ISO/IEC 23002-

5:2013/Amd 2:2017

Reference software for HEVC-related VTL

extensions

2

11 PD ISO/IEC TR 19075-

5:2016

Information technology. Database languages. SQL

Technical Reports. Row Pattern Recognition in

SQL

92

12 PD ISO/IEC TR 20748-

1:2016

Information technology for learning, education

and training. Learning analytics interoperability.

Reference model

42

Điện – Điện tử- Thiết bị điện Trở về đầu trang

13 ASTM E1725-14e1

Replace: ASTM E1725-

14

Standard Test Methods for Fire Tests of Fire-

Resistive Barrier Systems for Electrical System

Components

11

14 BS EN 62108:2016 Concentrator photovoltaic (CPV) modules and 54

Replace: BS EN

62108:2008

assemblies. Design qualification and type approval

15 BS EN 62689-1:2016 Current and voltage sensors or detectors, to be

used for fault passage indication purposes. General

principles and requirements

94

16 BS EN 62056-6-2:2016

Replace: BS EN 62056-

6-2:2013

Electricity metering data exchange. The

DLMS/COSEM suite. COSEM interface classes

316

17 BS EN 62056-5-3:2016

Replace: BS EN 62056-

5-3:2014

Electricity metering data exchange. The

DLMS/COSEM suite. DLMS/COSEM application

layer

204

18 BS EN 61853-2:2016 Photovoltaic (PV) module performance testing and

energy rating. Spectral responsivity, incidence

angle and module operating temperature

measurements

26

19 BS EN ISO 20109:2016 Simultaneous interpreting. Equipment.

Requirements

28

20 BS EN ISO 4043:2016 Simultaneous interpreting. Mobile booths.

Requirements

22

21 BS EN ISO 2603:2016 Simultaneous interpreting. Permanent booths.

Requirements

22

22 BS EN 61215-1:2016

Replace: BS EN

61215:2005

Terrestrial photovoltaic (PV) modules. Design

qualification and type approval. Test requirements

24

23 IEC 60335-2-

38/AMD2:2016

PRV Replace: IEC

60335-2-

38:2002+AMD1:2008

CSV

Amendment 2 - Household and similar electrical

appliances - Safety - Part 2-38: Particular

requirements for commercial electric griddles and

griddle grills

23

24 IEC 61300-2-

9:2017 Replace: IEC

61300-2-9:2010

Fibre optic interconnecting devices and passive

components - Basic test and measurement

procedures - Part 2-9: Tests - Shock

12

25 IEC

62211:2017 Replace:

IEC 62211:2003

Inductive components - Reliability management 15

26 IEC TR 63051:2017 Documentation on design automation subjects -

Mathematical algorithm hardware description

languages for system level modeling and

verification (HDLMath)

16

27 IEC TS 80004-9:2017 Nanotechnologies - Vocabulary - Part 9: Nano-

enabled electrotechnical products and systems

11

28 IEC 60794-1-

2:2017 Replace: IEC

60794-1-2:2013

Optical fibre cables - Part 1-2: Generic

specification - Basic optical cable test procedures -

General guidance

20

29 IEC TS 62607-3-2:2017 Nanomanufacturing - Key control characteristics -

Part 3-2: Luminescent nanoparticles -

Determination of mass of quantum dot dispersion

12

30 IEC TS 62607-4-5:2017 Nanomanufacturing - Key control characteristics -

Part 4-5: Cathode nanomaterials for nano-enabled

electrical energy storage - Electrochemical

characterization, 3-electrode cell method

22

31 IEC 61340-4-

7:2017 Replace: IEC

61340-4-7:2010

Electrostatics - Part 4-7: Standard test methods for

specific applications - Ionization

62

32 IEC TR 62343-6-

6:2017 Replace: IEC TR

62343-6-6:2011

Dynamic modules - Part 6-6: Design guide -

Failure mode effect analysis for optical units of

dynamic modules

29

33 ISO/IEC 7812-1:2017

Replace: ISO/IEC 7812-

1:2015

Identification cards -- Identification of issuers --

Part 1: Numbering system

7

34 ISO/IEC 7812-2:2017

Replace: ISO/IEC 7812-

2:2015

Identification cards -- Identification of issuers --

Part 2: Application and registration procedures

12

35 ISO/IEC 23008-

3:2015/Amd 3:2017

MPEG-H 3D Audio Phase 2 454

36 ISO 12233:2017

Replace: ISO

12233:2014

Photography -- Electronic still picture imaging --

Resolution and spatial frequency responses

49

37 PD IEC/TS 62735-

2:2016

Direct current (DC) plugs and socket-outlets for

information and communication technology (ICT)

equipment installed in data centres and telecom

central offices. Plug and socket-outlet system for

5,2 kW

26

38 PD CLC/TR 50670:2016 External fire exposure to roofs in combination

with photovoltaic (PV) arrays. Test method(s)

18

39 PD IEC/TS 61836:2016 Solar photovoltaic energy systems. Terms,

definitions and symbols

92

40 PD IEC/TR 63042-

100:2016

UHV AC transmission systems. General

information

32

41 PD IEC/TR 62899-

250:2016

Printed electronics. Material technologies required

in printed electronics for wearable smart devices

18

Cáp điện Trở về đầu trang

42 BS EN 50289-1-11:2016

Replace: BS EN 50289-

1-11:2002

Communication cables. Specifications for test

methods. Electrical test methods. Characteristic

impedance, input impedance, return loss

42

43 IEC 61084-1:2017

PRV Replace: IEC

61084-

Cable trunking systems and cable ducting systems

for electrical installations - Part 1: General

requirements

90

1:1991/AMD1:1993

44 IEC 61084-2-1:2017

PRV Replace: IEC

61084-2-1:1996

Cable trunking systems and cable ducting systems

for electrical installations - Part 2-1: Particular

requirements - Cable trunking systems and cable

ducting systems intended for mounting on walls

and ceilings

49

45 IEC 61084-2-2:2017

PRV Replace: IEC

61084-2-2:2003

Cable trunking systems and cable ducting systems

for electrical installations - Part 2-2: Particular

requirements - Cable trunking systems and cable

ducting systems intended for mounting underfloor,

flushfloor, or onfloor

62

46 IEC 61084-2-3:2017

PRV

Cable trunking systems and cable ducting systems

for electrical installations - Part 2-3: Particular

requirements - Slotted cable trunking systems

intended for installation in cabinets

36

47 IEC 61084-2-4:2017

PRV Replace: IEC

61084-2-4:1996

Cable trunking systems and cable ducting systems

for electrical installations - Part 2-4: Particular

requirements - Service poles and service posts

60

Vận tải – Đường bộ – Đường sắt Trở về đầu trang

48 BS EN 50121-4:2016

Replace: BS EN 50121-

4:2015

Railway applications. Electromagnetic

compatibility. Emission and immunity of the

signalling and telecommunications apparatus

22

49 ISO 8936:2017 Replace:

ISO 8936:2007

Awnings for leisure accommodation vehicles --

Requirements and test methods

26

50 ISO/TS 21219-25:2017 Intelligent transport systems -- Traffic and travel

information (TTI) via transport protocol experts

group, generation 2 (TPEG2) -- Part 25:

Electromobility charging infrastructure (TPEG2-

EMI)

61

51 ISO 14469:2017

Replace: ISO 14469-

1:2004; ISO 14469-

1:2004; ISO 14469-

3:2006

Road vehicles -- Compressed natural gas (CNG)

refuelling connector

37

52 PD ISO/TS 21219-

23:2016

Intelligent transport systems. Traffic and travel

information (TTI) via transport protocol experts

group, generation 2 (TPEG2). Roads and

multimodal routes (TPEG2-RMR)

56

Máy bay và Vũ trụ Trở về đầu trang

53 ASTM F3178 -16 Standard Practice for Operational Risk

Assessment of Small Unmanned Aircraft Systems

(sUAS)

12

54 ASTM F2245 -16c

Replace: ASTM F2245-

16b

Standard Specification for Design and

Performance of a Light Sport Airplane

34

55 ASTM F3061/F3061M-

16b Replace: ASTM

F3061/F3061M-16a

Standard Specification for Systems and Equipment

in Small Aircraft

47

56 BS EN 4644-002:2016

Replace: BS EN 4644-

002:2012

Aerospace series. Connector, electrical and

optical, rectangular, modular, rectangular inserts,

operating temperature 175°C (or 125°C)

continuous. Specification of performance and

contact arrangements

32

57 BS EN 4644-142:2016

Replace: BS EN 4644-

142:2012

Aerospace series. Connector, electrical and

optical, rectangular, modular, rectangular inserts,

operating temperature 175°C (or 125°C)

continuous. Size 4 receptacle for rack and panel

application, class C and D. Product standard

14

58 BS EN 6059-202:2016 Aerospace series. Electrical cables, installation.

Protection sleeves. Test methods. Dimensions and

mass

10

59 BS EN 4309:2016 Aerospace series. Nuts, hexagon, self-locking by

plastic ring, normal height, normal across flats, in

alloy steel, cadmium plated. Classification: 900

MPa (at ambient temperature) / 120°C

12

60 BS EN 2811:2016 Aerospace series. Nuts, hexagon,

slotted/castellated in steel cadmium plated.

Classification. 1 100 MPa/235°C

12

61 BS EN 3672:2016

Replace: BS EN

3672:2008

Aerospace series. Shank nuts, self-locking, in heat

resisting nickel base alloy NI-P101HT

(Waspaloy), silver plated, for 30°C swage.

Classification. 1 210 MPa (at ambient

temperature) / 730°C

12

62 BS EN 3902:2016 Aerospace series. Washers for rivet assemblies, in

aluminium alloy, anodized, metric series

10

63 ISO 16004:2017

Replace: ISO

16004:2005

Aircraft ground equipment -- Passenger boarding

bridge or transfer vehicle -- Interface requirements

with aircraft doors

6

64 ISO 16338:2017

Replace: ISO

16338:2013

Welding for aerospace applications -- Resistance

spot and seam welding

42

Cơ khí – Chế tạo Trở về đầu trang

65 BS EN ISO 10675-

1:2016 Replace: BS EN

ISO 10675-1:2013

Non-destructive testing of welds. Acceptance

levels for radiographic testing. Steel, nickel,

titanium and their alloys

20

66 PD ISO/TR 22201-

3:2016 Replace: PD

ISO/TR 22201-3:2013

Lifts (elevators), escalators and moving walks.

Programmable electronic systems in safety related

applications. Life cycle guideline for

programmable electronic systems related to

PESSRAL and PESSRAE

18

67 PD ISO/TR 8100-

24:2016

Safety requirements for lifts (elevators).

Convergence of lift requirements

108

Thiết bị nông nghiệp Trở về đầu trang

68 ISO 7112:2017 Replace:

ISO 7112:2008

Machinery for forestry -- Portable brush-cutters

and grass-trimmers -- Vocabulary

7

69 ISO 5395-3:2013/Amd

1:2017

OPC, Parking brake, ROPS, pressurized hoses,

cutting means, grass catcher and test probe

4

Luyện kim – Sản phẩm kim loại Trở về đầu trang

70 ASTM D5367 -16

Replace: ASTM D5367-

08

Standard Practice for Evaluating Coatings Applied

Over Surfaces Treated With Inhibitors Used to

Prevent Flash Rusting of Steel When Water or

Water/Abrasive Blasted

3

71 ASTM D6491-09(2016) Standard Practice for Evaluation of Aging

Resistance of Prestressed Prepainted Metal In a

Dry Heat Test

2

72 ASTM E2775 -16

Replace: ASTM E2775-

11

Standard Practice for Guided Wave Testing of

Above Ground Steel Pipework Using Piezoelectric

Effect Transduction

11

73 ASTM E3081-16 Standard Practice for Outlier Screening Using

Process Compensated Resonance Testing via

Swept Sine Input for Metallic and Non-Metallic

Parts

9

74 ASTM A276/A276M –

16a

Standard Specification for Stainless Steel Bars and

Shapes

8

75 ASTM A356/A356M -

16 Replace: ASTM

A356/A356M-11(2016)

Standard Specification for Steel Castings, Carbon,

Low Alloy, and Stainless Steel, Heavy-Walled for

Steam Turbines

6

76 ASTM A1098/A1098M-

16

Standard Specification for Welded Austenitic

Alloy Steel Boiler, Superheater, Condenser, and

Heat Exchanger Tubes with Textured Surface(s)

8

77 ASTM A941 -16

Replace: ASTM A941-

15

Standard Terminology Relating to Steel, Stainless

Steel, Related Alloys, and Ferroalloys

8

78 ASTM E2760-16

Replace: ASTM E2760-

10e2

Standard Test Method for Creep-Fatigue Crack

Growth Testing

19

79 ASTM D3003 -01(2016)

Replace: ASTM D3003-

01(2012)

Standard Test Method for Pressure Mottling and

Blocking Resistance of Organic Coatings on Metal

Substrates

3

80 ISO 16112:2017

Replace: ISO

16112:2006

Compacted (vermicular) graphite cast irons –

Classification

24

81 ISO 15236-2:2017

Replace: ISO 15236-

2:2004

Steel cord conveyor belts -- Part 2: Preferred belt

types

6

82 ISO/TR 21704:2017 Toughness of round steel link chains -- Test with

sub-size specimens

43

83 JIS G 4051:2016 Carbon steels for machine structural use 24

84 JIS H 4650:2016

Replace:JIS H

4650:2012

Titanium and titanium alloys -- Bars 13

85 JIS H 4670:2016 Titanium and titanium alloys -- Wires and wire

rods

10

86 JIS H 4751:2016

Replace:JIS H

4751:1998

Zirconium alloy tubes 24

Xây dựng – Vật liệu xây dựng Trở về đầu trang

87 ASTM C1552-16

Replace: ASTM C1552-

15

Standard Practice for Capping Concrete Masonry

Units, Related Units and Masonry Prisms for

Compression Testing

5

88 ASTM F3191-16 Standard Practice for Field Determination of

Substrate Water Absorption (Porosity) for

Substrates to Receive Resilient Flooring

4

89 ASTM D6926-16

Replace: ASTM D6926-

10

Standard Practice for Preparation of Asphalt

Mixture Specimens Using Marshall Apparatus

7

90 ASTM D2493/D2493M-

16 Replace: ASTM

D2493/D2493M-09

Standard Practice for Viscosity-Temperature Chart

for Asphalt Binders

5

91 ASTM D6929 -16 Standard Practice to Evaluate the Effect of

Freezing on Emulsified Asphalts

4

92 ASTM F451 -16

Replace: ASTM F451-08

Standard Specification for Acrylic Bone Cement 11

93 ASTM C55-16 Replace:

ASTM C55-14a

Standard Specification for Concrete Building

Brick

3

94 ASTM C1634-16

Replace: ASTM C1634-

15

Standard Specification for Concrete Facing Brick 3

95 ASTM C1272-16b

Replace: ASTM C1272-

16a

Standard Specification for Heavy Vehicular

Paving Brick

4

96 ASTM E1318-09(2017)

Replace: ASTM E1318-

09

Standard Specification for Highway Weigh-In-

Motion (WIM) Systems with User Requirements

and Test Methods

18

97 ASTM C717-16a Standard Terminology of Building Seals and 13

Replace: ASTM C717-

16

Sealants

98 ASTM D6023-16

Replace: ASTM D6023-

15

Standard Test Method for Density (Unit Weight),

Yield, Cement Content, and Air Content

(Gravimetric) of Controlled Low-Strength

Material (CLSM)

5

99 ASTM D5731-16

Replace: ASTM D5731-

08

Standard Test Method for Determination of the

Point Load Strength Index of Rock and

Application to Rock Strength Classifications

11

100 ASTM C40/C40M -16

Replace: ASTM

C40/C40M-11

Standard Test Method for Organic Impurities in

Fine Aggregates for Concrete

2

101 ASTM C67-16 Replace:

ASTM C67-14

Standard Test Methods for Sampling and Testing

Brick and Structural Clay Tile

15

102 ASTM D2486-06(2016)

Replace: ASTM D2486-

06(2012)e1

Standard Test Methods for Scrub Resistance of

Wall Paints

4

103 BS EN ISO 12696:2016

Replace: BS EN ISO

12696:2012

Cathodic protection of steel in concrete 58

104 JIS R 5201:2015 Physical testing methods for cement 86

Hóa học Trở về đầu trang

105 ASTM D3091-72(2016)

Replace: ASTM D3091-

72(2008)

Standard Practice for Safe Filling of Low-Pressure

Pressurized Products

3

106 ASTM D3090 -72

(2016) Replace: ASTM

D3090-72(2008)

Standard Practice for Storage Testing of Aerosol

Products

4

107 ASTM E2680 -16

Replace: ASTM E2680-

09(2015)e1

Standard Test Method for Appearance of Clear,

Transparent Liquids (Visual Inspection Procedure)

4

108 ASTM D6166 -12(2016)

Replace: ASTM D6166-

12

Standard Test Method for Color of Pine Chemicals

and Related Products (Instrumental Determination

of Gardner Color)

3

109 ASTM D6906-

12a(2016)

Standard Test Method for Determination of

Titanium Treatment Weight on Metal Substrates

by Wavelength Dispersive X-Ray Fluorescence

2

110 ASTM C1843-16 Standard Test Method for Determining Moisture

Content in Uranium-Ore Concentrate

3

111 ASTM D 890-12(2016)

Replace: ASTM D890-

12

Standard Test Method for Water in Liquid Pine

Chemicals

3

112 ISO 19563:2017 Determination of theanine in tea and instant tea in

solid form using high-performance liquid

13

chromatography

113 JIS B 8223:2015

Replace:JIS B

8223:2006

Water conditioning for boiler feed water and

boiler water

113

114 PD CEN/TS 17010:2016 Nanotechnologies. Guidance on measurands for

characterising nano-objects and materials that

contain them

78

115 PD CEN/TS 16981:2016 Photocatalysis. Glossary of terms 58

Đo lường và phép đo, hiện tượng vật lý Trở về đầu trang

116 BS EN ISO 16610-

28:2016 Replace: DD

ISO/TS 16610-28:2010

Geometrical product specifications (GPS).

Filtration. Profile filters: End effects

32

117 ISO 1938-2:2017 Geometrical product specifications (GPS) --

Dimensional measuring equipment -- Part 2:

Reference disk gauges

11

118 PD ISO/TR 19234:2016 Hydrometry. Low cost baffle solution to aid fish

passage at triangular profile weirs that conform to

ISO 4360

24

Chất dẻo – Cao su Trở về đầu trang

119 ISO 15876-1:2017

Replace: ISO 15876-

1:2003; ISO 15876-

1:2003/Amd 1:2007

Plastics piping systems for hot and cold water

installations -- Polybutene (PB) -- Part 1: General

9

120 ISO 15876-2:2017

Replace: ISO 15876-

2:2003; ISO 15876-

2:2003/Amd 1:2007

Plastics piping systems for hot and cold water

installations -- Polybutene (PB) -- Part 2: Pipes

16

121 ISO 15876-3:2017

Replace: ISO 15876-

3:2003

Plastics piping systems for hot and cold water

installations -- Polybutene (PB) -- Part 3: Fittings

14

122 ISO 15876-5:2017

Replace: ISO 15876-

5:2003

Plastics piping systems for hot and cold water

installations -- Polybutene (PB) -- Part 5: Fitness

for purpose of the system

8

123 ISO 16620-5:2017 Plastics -- Biobased content -- Part 5: Declaration

of biobased carbon content, biobased synthetic

polymer content and biobased mass content

7

124 JIS K 6922-2:2010 Plastics -- Polyethylene (PE) moulding and

extrusion materials -- Part 2: Preparation of test

specimens and determination of properties

16

125 ISO 1437:2017 Replace:

ISO 1437:2007

Rubber compounding ingredients -- Carbon black

-- Determination of sieve residue

7

126 ISO 6134:2017 Replace:

ISO 6134:2005

Rubber hoses and hose assemblies for saturated

steam -- Specification

12

Dầu mỏ - Nhiên liệu sinh học rắn Trở về đầu trang

127 BS EN ISO 17776:2016

Replace: BS EN ISO

17776:2002

Petroleum and natural gas industries. Offshore

production installations. Major Accident hazard

management during the design of new installations

108

128 ISO 11114-1:2012/Amd

1:2017

Gas cylinders - Compatibility of cylinder and valve

materials with gas contents - Part 1: Metallic materials. 7

129 JIS K 0098:2016

Replace:JIS K

0098:1998

Methods for determination of carbon monoxide in

flue gas

18

130 JIS K 8594:2015

Replace:JIS K

8594:1996

Petroleum benzine (Reagent) 10

131 ISO 18134-2:2017

Replace: ISO 18134-

2:2015

Solid biofuels -- Determination of moisture

content -- Oven dry method -- Part 2: Total

moisture -- Simplified method

5

132 PD ISO/TS 17225-

8:2016

Solid biofuels. Fuel specifications and classes.

Graded thermally treated and densified biomass

fuels

24

Gốm sứ Trở về đầu trang

133 ISO 19606:2017 Fine ceramics (advanced ceramics, advanced

technical ceramics) -- Test method for surface

roughness of fine ceramic films by atomic force

microscopy

24

134 ISO 19722:2017 Fine ceramics (advanced ceramics, advanced

technical ceramics) -- Test method for

determination of photocatalytic activity on

semiconducting photocatalytic materials by

dissolved oxygen consumption

17

135 ISO 20343:2017 Fine ceramics (advanced ceramics, advanced

technical ceramics) -- Test method for determining

elastic modulus of thick ceramic coatings at

elevated temperature

9

Công nghệ da Trở về đầu trang

136 ISO 4044:2017

(IULTCS/IUC 3)

Replace: ISO 4044:2008

(IULTCS/IUC 3)

Leather -- Chemical tests -- Preparation of

chemical test samples

4

137 ISO/TR 2822-2:2017 Leather -- Raw cattle hides and calf skins -- Part 2:

Guidelines for grading on the basis of mass

11

138 ISO/TR 2822-3:2017 Leather -- Raw cattle hides and calf skins -- Part 3:

Guidelines for grading on the basis of defects

9

Dệt Trở về đầu trang

139 ISO 14362-1:2017 Textiles -- Methods for determination of certain 32

Replace: ISO 24362-

1:2014

aromatic amines derived from azo colorants -- Part

1: Detection of the use of certain azo colorants

accessible with and without extracting the fibres

140 ISO 14362-3:2017

Replace: ISO 24362-

3:2014

Textiles -- Methods for determination of certain

aromatic amines derived from azo colorants -- Part

3: Detection of the use of certain azo colorants,

which may release 4-aminoazobenzene

16

Gỗ - Giấy Trở về đầu trang

141 ISO 12122-4:2017 Timber structures -- Determination of

characteristic values -- Part 4: Engineered wood

products

11

142 BS EN ISO 12625-

4:2016 Replace: BS EN

ISO 12625-4:2005

Tissue paper and tissue products. Determination of

tensile strength, stretch at maximum force and

tensile energy absorption

18

143 BS EN ISO 12625-

5:2016 Replace: BS EN

ISO 12625-5:2005

Tissue paper and tissue products. Determination of

wet tensile strength

24

144 BS EN ISO 12625-

6:2016 Replace: BS EN

ISO 12625-6:2005

Tissue paper and tissue products. Determination of

grammage

20

Sơn và vecni Trở về đầu trang

145 ASTM D5301-92(2016)

Replace: ASTM D5301-

92(2012)

Standard Practice for Physical Characterization of

Paint Brushes

3

146 ASTM D7802-16

Replace: ASTM D7802-

12

Standard Terminology for Paint Roller

Application Tools

1

147 ASTM D2064-91(2016)

Replace: ASTM D2064-

91(2012)

Standard Test Method for Print Resistance of

Architectural Paints

2

148 ASTM D4213-08(2016)

Replace: ASTM D4213-

08(2012)

Standard Test Method for Scrub Resistance of

Paints by Abrasion Weight Loss

5

149 ASTM D4828 -94(2016)

Replace: ASTM D4828-

94(2012)e1

Standard Test Methods for Practical Washability

of Organic Coatings

4

150 ISO 20567-1:2017

Replace: ISO 20567-

1:2005

Paints and varnishes -- Determination of stone-

chip resistance of coatings -- Part 1: Multi-impact

testing

12

151 ISO 20567-2:2017

Replace: ISO 20567-

2:2005

Paints and varnishes -- Determination of stone-

chip resistance of coatings -- Part 2: Single-impact

test with a guided impact body

9

152 ISO 8502-2:2017

Replace: ISO 8502-

Preparation of steel substrates before application

of paints and related products -- Tests for the

6

2:2005 assessment of surface cleanliness -- Part 2:

Laboratory determination of chloride on cleaned

surfaces

153 ISO 8502-3:2017

Replace: ISO 8502-

3:1992

Preparation of steel substrates before application

of paints and related products -- Tests for the

assessment of surface cleanliness -- Part 3:

Assessment of dust on steel surfaces prepared for

painting (pressure-sensitive tape method)

8

154 ISO 8502-4:2017

Replace: ISO 8502-

4:1993

Preparation of steel substrates before application

of paints and related products -- Tests for the

assessment of surface cleanliness -- Part 4:

Guidance on the estimation of the probability of

condensation prior to paint application

26

Vi sinh vật học Trở về đầu trang

155 ISO 18465:2017 Microbiology of the food chain -- Quantitative

determination of emetic toxin (cereulide) using

LC-MS/MS

14

Thiết bị công nghiệp thực phẩm - Thiết bị vận chuyển Trở về đầu trang

156 ASTM F3216-16 Standard Test Method for Performance of

Retherm Ovens

11

157 ISO 703:2017 Replace:

ISO 703:2007

Conveyor belts -- Transverse flexibility

(troughability) -- Test method

5

Nhãn an toàn Trở về đầu trang

158 ASTM D4236-94(2016)

Replace: ASTM D4236-

94(2011)

Standard Practice for Labeling Art Materials for

Chronic Health Hazards

5

An toàn – Môi trường Trở về đầu trang

159 ASTM E1918 -16

Replace: ASTM E1918-

06(2015)

Standard Test Method for Measuring Solar

Reflectance of Horizontal and Low-Sloped

Surfaces in the Field

5

160 ASTM E2893-16e1

Replace: ASTM E2893-

16

Standard Guide for Greener Cleanups

30

161 BS EN ISO/IEC 80079-

38:2016 Replace: BS EN

1710:2005+A1:2008

Explosive atmospheres. Equipment and

components in explosive atmospheres in

underground mines

66

162 BS 9999:2017 Replace:

BS 9999:2008

Fire safety in the design, management and use of

buildings. Code of practice

418

163 BS ISO 12828-2:2016 Validation methods for fire gas analyses.

Intralaboratory validation of quantification

methods

46

164 IEC 61010-

1:2010+AMD1:2016

Safety requirements for electrical equipment for

measurement, control, and laboratory use - Part 1:

666

CSV Replace: IEC

61010-

1:2010/AMD1:2016

General requirements

165 IEC 61010-2-030:2017

RLV Replace: IEC

61010-2-

030:2010/COR1:2011

Safety requirements for electrical equipment for

measurement, control, and laboratory use - Part 2-

030: Particular requirements for equipment having

testing or measuring circuits

126

166 IEC 61010-2-034:2017 Safety requirements for electrical equipment for

measurement, control, and laboratory use - Part 2-

034: Particular requirements for measurement

equipment for insulation resistance and test

equipment for electric strength

90

167 ISO 16639:2017 Surveillance of the activity concentrations of

airborne radioactive substances in the workplace

of nuclear facilities

32

168 ISO 7029:2017 Replace:

ISO 7029:2000

Acoustics -- Statistical distribution of hearing

thresholds related to age and gender

22

Y tế - Chăm sóc sức khỏe Trở về đầu trang

169 ASTM F1638 -95

(2016)e1 Replace:

F1638-95(2016)

Standard Terminology for Surgical

Tissue/Dressing/Pick-Up Forceps (Thumb-Type)

2

170 ASTM F2995-16

Replace: ASTM F2995-

13

Standard Guide for Shipping Possibly Infectious

Materials, Tissues, and Fluids

9

171 BS EN 50436-3:2016

Replace; PD CLC/TR

50436-3:2010

Alcohol interlocks. Test methods and performance

requirements. Guidance for authorities, decision

makers, purchasers and users

50

172 BS EN 50436-7:2016 Alcohol interlocks. Test methods and performance

requirements. Installation document

22

173 ISO 25237:2017 Health informatics -- Pseudonymization 62

174 ISO 18310-1:2017 Measurement and prediction of the ambient dose

equivalent from patients receiving iodine 131

administration after thyroid ablation -- Part 1:

During the hospitalization

22

175 ISO 20408:2017 Traditional Chinese medicine -- Panax

notoginseng seeds and seedlings

11

176 JIS T 9254:2016/AMD1 Electrically operated adjustable bed for home use

(Amendment 1)

5

177 PD ISO/TR 15499:2016

Replace: PD ISO/TR

15499:2012

Biological evaluation of medical devices.

Guidance on the conduct of biological evaluation

within a risk management process

26

Đồ gia dụng - Đồ chơi Trở về đầu trang

178 BS EN 71-12:2016 Safety of toys. N-Nitrosamines and N-nitrosatable 36

Replace: BS EN 71-

12:2013

substances

179 BS EN ISO 23537-

1:2016 Replace: BS EN

13537:2012

Requirements for sleeping bags. Thermal and

dimensional requirements

32

180 JIS S 2006:2016

Replace:JIS S 2006:2009

Vacuum bottles 25

Thử nghiệm Trở về đầu trang

181 ASTM E3048 -16 Standard Test Method for Determination of Time

to Burn-Through Using the Intermediate Scale

Calorimeter (ICAL) Radiant Panel

5

182 IEC 62739-3:2017 Test method for erosion of wave soldering

equipment using molten lead-free solder alloy -

Part 3: Selection guidance of erosion test methods

32

183 ISO 10880:2017 Non-destructive testing -- Infrared thermographic

testing -- General principles

7

184 ISO 15708-4:2017 Non-destructive testing -- Radiation methods for

computed tomography -- Part 4: Qualification

11

185 ISO 18251-1:2017 Non-destructive testing -- Infrared thermography -

- Part 1: Characteristics of system and equipment

11

186 ISO 19675:2017 Non-destructive testing -- Ultrasonic testing --

Specification for a calibration block for phased

array testing (PAUT)

19

187 PD ISO/TS 5660-4:2016 Reaction-to-fire tests. Heat release, smoke

production and mass loss rate. Measurement of

low levels of heat release

46

Vấn đề chung, thuật ngữ, hướng dẫn quản lý Trở về đầu trang

188 ISO/TR 37121:2017 Sustainable development in communities --

Inventory of existing guidelines and approaches

on sustainable development and resilience in cities

96

189 PD ISO/TS 34700:2016 Animal welfare management. General

requirements and guidance for organizations in the

food supply chain

18

Thư viện Trường Đại học Công Nghiệp TP.HCM phối hợp với Trung tâm thông tin khoa

học và công nghệ TP.HCM cung cấp thông tin toàn văn dành cho người sử dụng thư viện trong

trường (SV, GV, HVCH, CBVC...) có nhu cầu học tập, nghiên cứu, tham khảo. Để gửi và nhận thông

tin, xin vui lòng liên hệ:

1. Thư viện Đại học Công Nghiệp TP.HCM: Gửi thông tin yêu cầu bằng 1 trong các phương tiện

sau:

+ Cổng thông tin Thư viện: http://lib.iuh.edu.vn tại mục "Yêu cầu tin";

+ Facebook: http://facebook.com/libiuh - Gửi qua "Tin nhắn" trên Page;

+ Liên hệ Phòng Nghiệp vụ: Phan Minh Trí – 0919.8989.33 - ĐT: (08) 38940390 (130) - Email:

[email protected]

2. Phòng đảm bảo thông tin của trung tâm thông tin khoa học và công nghệ TP.HCM

Địa chỉ: 79 Trương Định - Q1 - TP.HCM

ĐT: (08)38243826: (08)38297040 Ext: 202-203-216) Fax: 38291957

Website: www.cesti.gov.vn Email: [email protected]

Lưu ý

1/ Khi đến gửi yêu cầu thông tin, bạn nhớ mang theo thẻ sinh viên, thẻ giảng viên của trường.

2/ Thông tin được cung cấp miễn phi, ngoại trừ chi phí: in ấn tài liệu, mua tài liệu (nếu có)

Thư viện Trường Đại học Công nghiệp Thành phố H Chí Minh.