Page 1
TRƯỜNG ĐH CÔNG NGHIỆP TP. HỒ CHÍ MINH
TRUNG TÂM THÔNG TIN – THƯ VIỆN
TIÊU CHUẨN MỚI THÁNG 04/2016
Mục lục
TIÊU CHUẨN QUỐC GIA (TCVN) .......................................................... 3
Thủy sản – Sản phẩm thủy sản.............................................................................. 3
Quả tươi ................................................................................................................. 3
Sản phẩm từ sữa ..................................................................................................... 3
An toàn vệ sinh thực phẩm .................................................................................... 4
Sản phẩm từ chất dẻo (Hệ thống đường ống - Ống nhựa)................................... 4
Dầu mỏ ..................................................................................................................... 5
Giấy .......................................................................................................................... 5
Gỗ ............................................................................................................................. 6
Giầy dép ................................................................................................................... 7
Vật liệu dệt .............................................................................................................. 8
Kỹ thuật điện – Điện tử .......................................................................................... 9
Công nghệ thông tin ............................................................................................. 10
Luyện kim – Hàn .................................................................................................. 11
Công trình thủy lợi ............................................................................................... 12
Xây dựng................................................................................................................ 12
Quan trắc môi trường .......................................................................................... 12
Phép đo – Dụng cụ đo ........................................................................................... 13
Mã số mã vạch vật phẩm ..................................................................................... 13
Phương pháp – Quy trình lấy mẫu ..................................................................... 14
Thông tin và tư liệu .............................................................................................. 14
TIÊU CHUẨN NƯỚC NGOÀI ................................................................. 14
Công nghệ thông tin ............................................................................................. 14
Điện – Điện tử- Thiết bị điện ............................................................................... 16
Giao thông – Vận tải ............................................................................................. 19
Tàu thủy ................................................................................................................. 21
Cơ khí – Chế tạo ................................................................................................... 21
Luyện kim – Sản phẩm kim loại .......................................................................... 22
Xây dựng – Vật liệu xây dựng ............................................................................. 23
Hóa học .................................................................................................................. 26
Page 2
2
Chất dẻo – Cao su ................................................................................................. 26
Nhiên liệu sinh học - Thiết bị công nghiệp dầu mỏ ............................................ 27
Khoáng sản - Phân bón ....................................................................................... 27
Da - Giấy - Sơn và Vecni ...................................................................................... 28
Gốm sứ - Dệt may ................................................................................................. 28
Vật liệu ................................................................................................................... 29
Thực phẩm ............................................................................................................ 30
Thức ăn chăn nuôi ................................................................................................ 30
Y tế - Thiết bị y tế ................................................................................................. 30
Tinh dầu ................................................................................................................. 31
Sản phẩm sinh học ................................................................................................ 31
Môi trường – An toàn ........................................................................................... 31
Chất lượng đất – Chất lượng nước ..................................................................... 32
Dụng cụ đo – Phương pháp thử nghiệm ............................................................. 32
Tài liệu hướng dẫn ................................................................................................ 32
Page 3
3
Chi tiết
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
TIÊU CHUẨN QUỐC GIA (TCVN)
Thủy sản – Sản phẩm thủy sản Trở về đầu trang
1 TCVN 10734:2015 Thủy sản khô. Yêu cầu kỹ thuật 12
2 TCVN 10735:2015 Cá cơm luộc trong nước muối và làm khô 11
3 TCVN 11042:2015 Cá xông khói, cá tẩm hương khói và cá khô xông khói 20
4 TCVN 11043:2015
Bào ngư sống, bào ngư nguyên liệu tươi được làm
lạnh hoặc đông lạnh để tiêu thụ trực tiếp hoặc để chế
biến tiếp theo
14
5 TCVN 11047:2015 Thủy sản và sản phẩm thủy sản. Xác định hàm lượng
histamin. Phương pháp đo huỳnh quang 17
Quả tươi Trở về đầu trang
6 TCVN 10746:2015 Bưởi quả tươi 10
7 TCVN 10743:2015 Nho quả tươi 12
Sản phẩm từ sữa Trở về đầu trang
8 TCVN 11157:2015 Casein và caseinat. Xác định hàm lượng chất béo.
Phương pháp khối lượng (phương pháp chuẩn) 19
9 TCVN 11158:2015 Casein. Xác định hàm lượng "tro cố định" (Phương
pháp chuẩn) 10
10 TCVN 11159:2015 Casein rennet và caseinat. Xác định hàm lượng tro
(phương pháp chuẩn) 9
11 TCVN 11160:2015 Casein và caseinat. Xác định pH (phương pháp chuẩn) 9
12 TCVN 11161:2015 Casein. Xác định độ axit tự do (phương pháp chuẩn) 10
13 TCVN 11162:2015 Casein và caseinat. Xác định hàm lượng lactose.
Phương pháp đo quang 11
14 TCVN 11163:2015 Casein và caseinat. Xác định độ ẩm (Phương pháp
chuẩn) 12
15 TCVN 11164:2015 Casein và caseinat. Xác định hàm lượng các hạt cháy
sém và chất ngoại lai 18
Page 4
4
An toàn vệ sinh thực phẩm Trở về đầu trang
16 TCVN 11040:2015 Hướng dẫn kiểm soát campylobacter và salmonella
trong thịt gà 38
17 TCVN 11041:2015 Hướng dẫn sản xuất, chế biến, ghi nhãn và tiếp thị
thực phẩm được sản xuát theo phương pháp hữu cơ 64
18 TCVN 11044:2015
Hướng dẫn áp dụng các nguyên tắc chung về vệ sinh
thực phẩm để kiểm soát các loài vibrio gây bệnh trong
thủy sản
30
19 TCVN 11045:2015 Hướng dẫn đánh giá cảm quan tại phòng thử nghiệm
đối với cá và động vật có vỏ 33
20 TCVN 11046:2015
Thực phẩm. Xác định các nguyên tố vết. Xác định
asen trong thủy sản bằng đo phổ hấp thụ nguyên tử
dùng lò graphit (gfaas) sau khi phân hủy bằng lò vi
sóng
14
Sản phẩm từ chất dẻo (Hệ thống đường ống - Ống nhựa) Trở về đầu trang
21 TCVN 10966:2015
Hệ thống đường ống bằng chất dẻo chịu áp và không
chịu áp dùng để thoát nước và nước thải. Hệ thống
nhựa nhiệt rắn polyeste không no (up) gia cường sợi
thủy tinh (GRP). Phương pháp thử để kiểm chứng mối
nối bích bắt bulông
16
22 TCVN 10967:2015
Hệ thống đường ống bằng chất dẻo. Ống nhựa nhiệt
rắn gia cường sợi thủy tinh (GRP). Phương pháp xác
định độ bền kéo theo chiều dọc biểu kiến ban đầu
20
23 TCVN 10968:2015
Hệ thống đường ống bằng chất dẻo chịu áp và không
chịu áp dùng để thoát nước và nước thải. Hệ thống
nhựa nhiệt rắn polyeste không no (up) gia cường sợi
thủy tinh (GRP). Phương pháp thử để kiểm chứng mối
nối kết dính hoặc phủ bọc
14
24 TCVN 10969:2015
Hệ thống đường ống bằng chất dẻo. Ống nhựa nhiệt
rắn gia cường sợi thủy tinh (GPR). Phương pháp thử
để kiểm chứng độ bền với lệch dạng vòng ban đầu
11
Page 5
5
25 TCVN 10970:2015
Ống nhựa nhiệt nhắn gia cường sợi thủy tinh (GRP).
Xác định độ cứng rão vòng riêng dài hạn ở điều kiện
ướt và tính toán hệ số rão ướt
15
26 TCVN 10971:2015
Ống nhựa nhiệt nhắn gia cường sợi thủy tinh (GRP).
Xác định biến dạng uốn tới hạn dài hạn và lệch dạng
vòng tương đối tới hạn dài hạn ở điều kiện ướt
16
Dầu mỏ Trở về đầu trang
27 TCVN 10955-2:2015 Hướng dẫn đo dầu mỏ. Đo hydrocacbon lỏng. Phần 2:
Đồng hồ tuabin 17
28 TCVN 10956-1:2015 Hướng dẫn đo dầu mỏ. Đo dòng bằng hệ thống đo kiểu
điện tử. Phần 1: Đồng hồ tuabin 82
29 TCVN 10957-1:2015 Hướng dẫn đo dầu mỏ. Đo khối lượng khí thiên nhiên
lỏng 14
30 TCVN 10960:2015 Hướng dẫn đo dầu mỏ. Phương pháp đo thủ công 39
Giấy Trở về đầu trang
31 TCVN 10761:2015 Giấy, các tông và bột giấy. Xác định phần còn lại (độ
tro) sau khi nung ở nhiệt độ 525 độ C 9
32 TCVN 10762:2015 Bột giấy. Xác định nồng độ huyền phù bột giấy 8
33 TCVN 10763-1:2015
Bột giấy. Ước lượng độ bụi và các phần tử thô. Phần
1: Kiểm tra tờ mẫu xeo trong phòng thí nghiệm bằng
ánh sáng truyền qua
17
34 TCVN 10763-2:2015
Bột giấy. Ước lượng độ bụi và các phần tử thô. Phần
2: Kiểm tra tờ mẫu sản xuất trong nhà máy bằng ánh
sáng truyền qua
15
35 TCVN 10763-3:2015
Bột giấy. Ước lượng độ bụi và các phần tử thô. Phần
3: Kiểm tra bằng mắt dưới ánh sáng phản xạ theo
phương pháp diện tích màu đen tương đương (EBA)
13
36 TCVN 10763-4:2015
Bột giấy. Ước lượng độ bụi và các phần tử thô. Phần
4: Kiểm tra bằng thiết bị dưới ánh sáng phản xạ theo
phương pháp diện tích màu đen tương đương (EBA)
17
37 TCVN 10764:2015 Giấy, các tông và bột giấy. Xác định hàm lượng 12
Page 6
6
cađimi. Phương pháp quang phổ hấp thụ nguyên tử
38 TCVN 10765:2015 Bột giấy và giấy. Xác định nồng độ mực hữu hiệu còn
lại (chỉ số eric) bằng phép đo phản xạ hồng ngoại 14
39 TCVN 10973:2015 Giấy, các tông và bột giấy. Xác định hệ số bức xạ
khuếch tán (hệ số phản xạ khuếch tán) 28
40 TCVN 10974-1:2015
Giấy và các tông. Xác định độ bóng phản chiếu. Phần
1: Độ bóng tại góc 75 độ với chùm tia hội tụ, phương
pháp tappi
16
41 TCVN 10974-2:2015
Giấy và các tông. Xác định độ bóng phản chiếu. Phần
2: Độ bóng tại góc 75 độ với chùm tia song song,
phương pháp din
17
42 TCVN 10975-1:2015
Giấy và các tông. Xác định độ nhám/ độ nhẵn (phương
pháp không khí thoát qua). Phần 1: Phương pháp
chung
8
43 TCVN 10975-2:2015
Giấy và các tông. Xác định độ nhám/ độ nhẵn (phương
pháp không khí thoát qua). Phần 2: Phương pháp
bendtsen
21
44 TCVN 10975-3:2015
Giấy và các tông. Xác định độ nhám/ độ nhẵn (phương
pháp không khí thoát qua). Phần 3: Phương pháp
sheffield
16
45 TCVN 10975-4:2015
Giấy và các tông. Xác định độ nhám/ độ nhẵn (phương
pháp không khí thoát qua). Phần 4: Phương pháp
Print-surf
28
46 TCVN 10976:2015 Giấy các tông và bột giấy. Xác định clorua hòa tan
trong nước 10
47 TCVN 10977:2015 Giấy và các tông. Xác định lượng kiềm dự trữ 8
48 TCVN 10978:2015 Bột giấy. Xác định chất hòa tan trong axeton 13
49 TCVN 10999:2015 Giấy bồi nền tài liệu giấy 10
Gỗ Trở về đầu trang
50 TCVN 10314:2015 Ván sàn tre 20
51 TCVN 10315:2015 Ván cót ép 21
Page 7
7
52 TCVN 10316:2015 Ván bóc 18
53 TCVN 10749:2015
Độ bền tự nhiên của gỗ và các sản phẩm gỗ. Tính năng
của thuốc bảo quản gỗ khi xác định bằng phép thử sinh
học. Phần 2: Phân nhóm và ghi nhãn
14
54 TCVN 10750:2015
Thuốc bảo quản gỗ. Quy trình thuần thục nhanh gỗ đã
xử lý thuốc bảo quản trước khi thử nghiệm sinh học.
Phương pháp bay hơi
8
55 TCVN 10751:2015
Thuốc bảo quản gỗ. Phương pháp thử tại hiện trường
xác định hiệu lực của thuốc bảo quản gỗ để sử dụng
trong điều kiện có lớp phủ và không tiếp đất. Phương
pháp ghép mộng chữ L
21
56 TCVN 10752:2015
Độ bền tự nhiên của gỗ và các sản phẩm gỗ. Ván gỗ
nhân tạo. Phương pháp xác định khả năng chống chịu
nấm hại gỗ basidiomycetes
23
57 TCVN 10753:2015 Thuốc bảo quản gỗ. Phương pháp xác định hiệu lực
với nấm hại gỗ basidiomycetes 13
58 TCVN 10754:2015 Thuốc bảo quản gỗ. Phương pháp xác định hiệu lực
bảo quản gỗ tại bãi thử tự nhiên 12
Giầy dép Trở về đầu trang
59 TCVN 10936:2015 Giầy dép. Phương pháp thử khóa kéo. Độ bền chắc 10
60 TCVN 10937:2015 Giầy dép. Phương pháp thử khóa kéo. Độ bền khóa
của con trượt 9
61 TCVN 10938:2015 Giầy dép. Phương pháp thử tính chất của vật liệu đàn
hồi. Tính năng kéo 11
62 TCVN 10939:2015
Giầy dép. Phương pháp xác định độ bền của vật liệu
đàn hồi dùng trong giầy dép đối với sự kéo giãn lặp đi
lặp lại. Độ bền mỏi
9
63 TCVN 10940:2015 Giầy dép. Độ bền với sự xuất hiện và phát triển vết
nứt. Phương pháp uốn đai 12
64 TCVN 10941:2015 Giầy dép. Các chất có hại tiềm ẩn trong giầy dép và
các chi tiết của giầy dép. Xác định hợp chất hữu cơ 17
Page 8
8
thiếc có trong vật liệu làm giầy dép
65 TCVN 10942:2015
Giầy dép. Các chất có hại tiềm ẩn trong giầy dép và
các chi tiết của giầy dép. Xác định phtalat có trong vật
liệu làm giầy dép
12
66 TCVN 10943:2015
Giầy dép. Các chất có hại tiềm ẩn trong giầy dép và
các chi tiết của giầy dép. Phương pháp định lượng
dimetyl fumarat (DMFU) có trong vật liệu làm giầy
dép
13
67 TCVN 10944:2015 Giầy dép và các chi tiết của giầy dép. Phương pháp
đánh giá hoạt tính kháng khuẩn 21
68 TCVN 10945:2015
Giầy dép. Các chất có hại tiềm ẩn trong giầy dép và
các chi tiết của giầy dép. Phương pháp định lượng
dimetylformamit có trong vật liệu làm giầy dép
11
69 TCVN 10946:2015
Giầy dép. Các chất có hại tiềm ẩn trong giầy dép và
các chi tiết của giầy dép. Phương pháp định lượng
hydrocarbon (PAH) thơm đa vòng (PAH) có trong vật
liệu làm giầy dép
10
70 TCVN 10947:2015 Giầy dép. Phương pháp thử mũ giầy và lót mũ giầy.
Độ thấm hơi nước và độ hấp thụ hơi nước 13
71 TCVN 10948:2015 Giầy dép. Phương pháp thử mũ giầy, lót mũ giầy và
lót mặt. Độ bền màu với chà xát 19
72 TCVN 10949:2015 Giầy dép. Phương pháp thử mũ giầy, lót mũ giầy và
lót mặt. Sự di trú màu 8
73 TCVN 10950:2015 Giầy dép. Phương pháp thử đế ngoài, đế trong, lót mũ
giầy và lót mặt. Hàm lượng chất tan trong nước 8
74 TCVN 10951:2015 Giầy dép. Phương pháp thử giầy nguyên chiếc. Độ
cách nhiệt 7
Vật liệu dệt Trở về đầu trang
75 TCVN 10041-5:2015
Vật liệu dệt. Phương pháp pháp thử cho vải không dệt.
Phần 5: Xác định khả năng chống xuyên thủng cơ học
(phương pháp nén thủng bằng bi)
13
Page 9
9
76 TCVN 10041-6:2015 Vật liệu dệt. Phương pháp pháp thử cho vải không dệt.
Phần 6: Độ hấp thụ 14
77 TCVN 10041-7:2015 Vật liệu dệt. Phương pháp pháp thử cho vải không dệt.
Phần 7: Xác định chiều dài uốn 11
78 TCVN 10041-8:2015
Vật liệu dệt. Phương pháp pháp thử cho vải không dệt.
Phần 8: Xác định thời gian chất lỏng thấm qua (nước
tiểu mô phỏng)
9
79 TCVN 10041-9:2015 Vật liệu dệt. Phương pháp pháp thử cho vải không dệt.
Phần 9: Xác định độ rủ bao gồm hệ số rủ 20
80 TCVN 10041-10:2015
Vật liệu dệt. Phương pháp pháp thử cho vải không dệt.
Phần 10: Sự tạo bụi xơ và các mảnh vụn khác ở trạng
thái khô
17
81 TCVN 10041-11:2015 Vật liệu dệt. Phương pháp pháp thử cho vải không dệt.
Phần 11: Lượng tháo chạy 17
82 TCVN 10041-12:2015 Vật liệu dệt. Phương pháp pháp thử cho vải không dệt.
Phần 12: Độ thấm hút yêu cầu 20
83 TCVN 10041-13:2015 Vật liệu dệt. Phương pháp pháp thử cho vải không dệt.
Phần 13: Thời gian chất lỏng thấm qua lặp lại 14
84 TCVN 10041-14:2015 Vật liệu dệt. Phương pháp pháp thử cho vải không dệt.
Phần 14: Độ thấm ngược của lớp phủ 16
Kỹ thuật điện – Điện tử Trở về đầu trang
85 TCVN 10187-1:2015 Điều kiện môi trường. Rung và xóc của các thiết bị kỹ
thuật điện. Phần 1: Quy trình xác nhận dữ liệu động 7
86 TCVN 10187-2:2015
Điều kiện môi trường. Rung và xóc của các thiết bị kỹ
thuật điện. Phần 2: Thiết bị được vận chuyển bằng
máy bay phản lực có cánh cố định
42
87 TCVN 10895-1:2015
Hệ thống đánh giá chất lượng. Phần 1: Ghi nhận và
phân tích các khiếm khuyết trên các khối lắp ráp tấm
mạch in
23
88 TCVN 10895-2:2015 Hệ thống đánh giá chất lượng. Phần 2: Lựa chọn và sử
dụng phương án lấy mẫu để kiểm tra linh kiện điện tử 19
Page 10
10
và gói linh kiện điện tử
89 TCVN 10896:2015 Mô-đun quang điện màng mỏng mặt đất (PV) - Chất
lượng thiết kế và phê duyệt kiểu 45
Công nghệ thông tin Trở về đầu trang
90 TCVN 10858:2015 Giải thích dữ liệu thống kê. Kiểm nghiệm và khoảng
tin cậy liên quan đến tỷ lệ 62
91 TCVN 10859:2015 Giải thích dữ liệu thống kê. So sánh hai trung bình
trong trường hợp quan trắc theo cặp 11
92 TCVN 10860:2015 Giải thích thống kê kết quả thử. Ước lượng trung bình
- khoảng tin cậy 14
93 TCVN 11165:2015 Thẻ định danh. Đặc tính vật lý 18
94 TCVN 11166-1:2015 Thẻ định danh. Kỹ thuật ghi. Phần 1: Rập nổi 29
95 TCVN 11166-2:2015 Thẻ định danh. Kỹ thuật ghi. Phần 2: Sọc từ - kháng từ
thấp 27
96 TCVN 11166-6:2015 Thẻ định danh. Kỹ thuật ghi. Phần 6: Sọc từ - kháng từ
cao 31
97 TCVN 11166-7:2015 Thẻ định danh. Kỹ thuật ghi. Phần 7: Sọc từ - kháng từ
cao, mật độ cao 34
98 TCVN 11166-8:2015 Thẻ định danh. Kỹ thuật ghi. Phần 8: Sọc từ - kháng từ
51,7 kA/m (650 Oe) 16
99 TCVN 11166-9:2015 Thẻ định danh. Kỹ thuật ghi. Phần 9: Đánh dấu định
danh xúc giác 9
100 TCVN 11167-1:2015 Thẻ danh định. Thẻ mạch tích hợp. Phần 1: Thẻ tiếp
xúc. Đặc tính vật lý 7
101 TCVN 11167-2:2015 Thẻ danh định. Thẻ mạch tích hợp. Phần 2: Thẻ tiếp
xúc. Kích thước và vị trí tiếp xúc 11
102 TCVN 11167-3:2015 Thẻ danh định. Thẻ mạch tích hợp. Phần 3: Thẻ tiếp
xúc. Giao diện điện và giao thức truyền 65
103 TCVN 11167-4:2015 Thẻ danh định. Thẻ mạch tích hợp. Phần 4: Tổ chức,
an ninh và lệnh trao đổi 185
104 TCVN 11167-5:2015 Thẻ danh định. Thẻ mạch tích hợp. Phần 5: Đăng ký 13
Page 11
11
của bên cung cấp ứng dụng
105 TCVN 11167-6:2015 Thẻ danh định. Thẻ mạch tích hợp. Phần 6: Phần tử dữ
liệu liên ngành trong trao đổi 27
106 TCVN 11167-7:2015
Thẻ danh định. Thẻ mạch tích hợp. Phần 7: Lệnh liên
ngành đối với ngôn ngữ truy vấn thẻ có cấu trúc
(SCQL)
46
107 TCVN 11167-8:2015 Thẻ danh định. Thẻ mạch tích hợp. Phần 8: Lệnh đối
với thao tác an ninh 26
108 TCVN 11167-9:2015 Thẻ danh định. Thẻ mạch tích hợp. Phần 9: Lệnh đối
với quản lý thẻ 18
109 TCVN 11167-10:2015 Thẻ danh định. Thẻ mạch tích hợp. Phần10: Tín hiệu
điện tử và trả lời để thiết lập lại đối với quản lý thẻ 12
110 TCVN 11167-11:2015 Thẻ danh định. Thẻ mạch tích hợp. Phần11: Xác minh
cá nhân bằng phương pháp sinh trắc học 43
111 TCVN 11167-12:2015 Thẻ danh định. Thẻ mạch tích hợp. Phần 12:Thẻ tiếp
xúc. Thủ tục vận hành và giao diện usb 56
112 TCVN 11167-13:2015 Thẻ danh định. Thẻ mạch tích hợp. Phần 13: Lệnh đối
với quản lý ứng dụng trong môi trường đa ứng dụng 29
113 TCVN 11167-15:2015 Thẻ danh định. Thẻ mạch tích hợp. Phần 15: Ứng
dụng thông tin mã hóa 126
114 TCVN 11198-1:2015 Thẻ mạch tích hợp EMV cho hệ thống thanh toán. Đặc
tả ứng dụng thanh toán chung. Phần 1: Tổng quát 38
115 TCVN 11198-2:2015
Thẻ mạch tích hợp EMV cho hệ thống thanh toán. Đặc
tả ứng dụng thanh toán chung. Phần 2: Giới thiệu về
quy trình xử lý
23
116 TCVN 11198-3:2015
Thẻ mạch tích hợp EMV cho hệ thống thanh toán. Đặc
tả ứng dụng thanh toán chung. Phần 3: Quy trình xử lý
chức năng
81
Luyện kim – Hàn Trở về đầu trang
117 TCVN 11197:2014 Cọc thép. Phương pháp chống ăn mòn. Yêu cầu và
nguyên tắc lựa chọn 45
Page 12
12
118 TCVN 10894-1:2015
Công nghệ gắn kết bề mặt. Phần 1: Phương pháp tiêu
chuẩn áp dụng cho quy định kỹ thuật của linh kiện gắn
kết bề mặt
31
119 TCVN 10894-2:2015
Công nghệ gắn kết bề mặt. Phần 2: Điều kiện vận
chuyển và bảo quản các linh kiện gắn kết bề mặt.
Hướng dẫn áp dụng
11
120 TCVN 10894-3:2015
Công nghệ gắn kết bề mặt. Phần 3: Phương pháp tiêu
chuẩn áp dụng cho quy định kỹ thuật linh kiện để dùng
trong hàn nóng chảy lại lỗ xuyên
25
Công trình thủy lợi Trở về đầu trang
121 TCVN 10398:2015 Công trình thủy lợi. Đập xà lan. Yêu cầu thiết kế 45
122 TCVN 10399:2015 Công trình thủy lợi. Đập xà lan. Thi công và nghiệm
thu 51
123 TCVN 10400:2015 Công trình thủy lợi. Đập trụ đỡ. Yêu cầu thiết kế 62
124 TCVN 10401:2015 Công trình thủy lợi. Đập trụ đỡ. Thi công và nghiệm
thu 34
125 TCVN 10402:2015 Công trình thủy lợi. Đập cao su. Thiết kế, thi công và
nghiệm thu 60
126 TCVN 10403:2015 Công trình thủy lợi. Đập bê tông đầm lăn. Thi công và
nghiệm thu 30
127 TCVN 10407:2015 Công trình thủy lợi. Cửa van composite cống vùng
triều. Yêu cầu kỹ thuật 23
Xây dựng Trở về đầu trang
128 TCVN 10797:2015 Sản phẩm bó vỉa bê tông đúc sẵn 22
129 TCVN 10798:2015 Tấm bê tông cốt thép đúc sẵn gia cố mái kênh và lát
mặt đường 16
130 TCVN 10799:2015 Gối cống bê tông đúc sẵn 17
Quan trắc môi trường Trở về đầu trang
131 TCVN 10897:2015 Dữ liệu thực địa về khí hậu bao gồm kiểm tra xác nhận 30
132 TCVN 10958-1:2015 Khí tượng học. Đo lường gió. Phần 1: Phương pháp 24
Page 13
13
thử tính năng của phong kế cánh quay trong ống khí
động
133 TCVN 10959:2015 Khí tượng học. Phong kế/nhiệt kế dạng sóng âm.
Phương pháp thử chấp nhận đo tốc độ gió trung bình 27
Phép đo – Dụng cụ đo Trở về đầu trang
134 TCVN 10505-1:2015 Dụng cụ đo thể tích có cơ cấu pittông. Phần 1: Thuật
ngữ, yêu cầu chung và hướng dẫn người sử dụng 15
135 TCVN 10505-2:2015 Dụng cụ đo thể tích có cơ cấu pittông. Phần 2: Pipet
pittông 18
136 TCVN 10505-3:2015 Dụng cụ đo thể tích có cơ cấu pittông. Phần 3: Buret
pittông 11
137 TCVN 10505-4:2015 Dụng cụ đo thể tích có cơ cấu pittông. Phần 4: Dụng
cụ pha loãng 11
138 TCVN 10505-5:2015 Dụng cụ đo thể tích có cơ cấu pittông. Phần 5: Dụng
cụ phân phối định lượng 11
139 TCVN 10505-6:2015 Dụng cụ đo thể tích có cơ cấu pittông. Phần 6: Xác
định sai số phép đo bằng phương pháp khối lượng 20
140 TCVN 10505-7:2015
Dụng cụ đo thể tích có cơ cấu pittông. Phần 7: Đánh
giá tính năng của thiết bị không sử dụng phương pháp
khối lượng
33
141 TCVN 10506:2015 Dụng cụ thí nghiệm bằng thuỷ tinh. Bình hút ẩm 12
142 TCVN 10861:2015 Hướng dẫn sử dụng ước lượng độ lặp lại, độ tái lập và
độ đúng trong ước lượng độ không đảm bảo đo 55
143 TCVN 10862:2015 Độ không đảm bảo đo đối với các ứng dụng đo lường.
Phép đo lặp lại và thực nghiệm lồng 51
144 TCVN 10863:2015
Độ chính xác (độ đúng và độ chụm) của phương pháp
đo và kết quả đo. Hướng dẫn sử dụng TCVN 6910-
2:2001 (ISO 5725-2:1994) trong thiết kế, thực hiện và
phân tích thống kê các kết quả độ lặp lại và độ tái lập
liên phòng thí nghiệm
44
Mã số mã vạch vật phẩm Trở về đầu trang
Page 14
14
145 TCVN 11128:2015 Mã số mã vạch vật phẩm. Quy định đối với vị trí đặt
mã vạch 67
Phương pháp – Quy trình lấy mẫu Trở về đầu trang
146 TCVN 10853:2015 Phương án lấy mẫu liên tiếp để kiểm tra định lượng
phần trăm không phù hợp (đã biết độ lệch chuẩn) 42
147 TCVN 10854:2015
Quy trình lấy mẫu chấp nhận định tính. Mức chất
lượng quy định theo số cá thể không phù hợp trên một
triệu
26
148 TCVN 10855:2015
Quy trình lấy mẫu chấp nhận định tính. Hệ thống lấy
mẫu có số chấp nhận bằng không trên nguyên tắc số
tin cậy để kiểm soát chất lượng đầu ra
14
149 TCVN 10856:2015
Hệ thống lấy mẫu kết hợp có số chấp nhận bằng không
và quy trình kiểm soát quá trình để chấp nhận sản
phẩm
52
150 TCVN 10857-1:2015
Quy trình lấy mẫu chấp nhận dựa trên nguyên tắc phân
bổ ưu tiên (APP). Phần 1: Hướng dẫn về cách tiếp cận
APP
39
151 TCVN 10857-2:2015
Quy trình lấy mẫu chấp nhận dựa trên nguyên tắc phân
bổ ưu tiên (APP). Phần 2: Phương án lấy mẫu một lần
phối hợp dùng cho lấy mẫu chấp nhận định tính
62
Thông tin và tư liệu Trở về đầu trang
152 TCVN 10844:2015 Thông tin và tư liệu. Dịch vụ đăng ký cho các thư viện
và tổ chức liên quan 98
153 TCVN 10846:2015 Thông tin và tư liệu. Hướng dẫn về nội dung, tổ chức
và trình bày các bảng chỉ mục 64
154 TCVN 10845:2015 Thông tin và tư liệu. Mô tả thư mục và các tham chiếu.
Quy tắc viết tắt các thuật ngữ thư mục 11
155 TCVN 10847:2015 Thông tin và tư liệu. Tờ nhan đề của sách 14
TIÊU CHUẨN NƯỚC NGOÀI
Công nghệ thông tin Trở về đầu trang
156 BS ISO/IEC 19770- Information technology. IT asset management. 76
Page 15
15
3:2016 Entitlement schema
157 BS ISO/IEC 20919:2016 Information technology. Linear Tape File System
(LTFS) Format Specification. 1
158 BS ISO/IEC 30106-
2:2016
Information technology. Object oriented BioAPI. Java
implementation 78
159
BS ISO/IEC 30134-
1:2016 Replace: BS EN
ISO 3950:2009
Information technology. Data centres. Key
performance indicators. Overview and general
requirements
11
160 BS ISO/IEC/IEEE
18883:2016
Information technology. Ubiquitous green community
control network. Security. 40
161 ISO 5776:2016
Replace: ISO 5776:1983
Graphic technology -- Symbols for text proof
correction 34
162 ISO/IEC 19770-3:2016 Information technology -- IT asset management -- Part
3: Entitlement schema 62
163 ISO/IEC 24779-1:2016
Information technology -- Cross-jurisdictional and
societal aspects of implementation of biometric
technologies -- Pictograms, icons and symbols for use
with biometric systems -- Part 1: General principles
10
164 ISO/IEC 29169:2016
Information technology -- Process assessment --
Application of conformity assessment methodology to
the assessment to process quality characteristics and
organizational maturity
18
165 ISO/IEC 30100-1:2016 Information technology -- Home network resource
management -- Part 1: Requirements 19
166 ISO/IEC 30100-2:2016 Information technology -- Home network resource
management -- Part 2: Architecture 193
167 ISO/IEC 30100-3:2016 Information technology -- Home network resource
management -- Part 3: Management application 193
168 ISO/IEC 30134-2:2016
Information technology -- Data centres -- Key
performance indicators -- Part 2: Power usage
effectiveness (PUE)
25
Page 16
16
169 ISO/IEC 30134-3:2016
Information technology -- Data centres -- Key
performance indicators -- Part 3: Renewable energy
factor (REF)
11
170 ISO/IEC/IEEE
18881:2016
Information technology -- Ubiquitous green
community control network -- Control and
management
48
171 ISO/IEC/IEEE
18883:2016
Information technology -- Ubiquitous green
community control network -- Security 18
Điện – Điện tử- Thiết bị điện Trở về đầu trang
172
BS EN 60393-2:2016
Replace: BS QC
410100:1990
IEC 60393-2:1989, QC
410100
Potentiometers for use in electronic equipment.
Sectional specification. Lead-screw actuated and
rotary preset potentiometers
34
173
BS EN 60393-5:2016
Replace: BS QC
410300:1992,
IEC 60393-5:1992
Potentiometers for use in electronic equipment.
Sectional specification. Single-turn rotary low-power
wirewound and non-wirewound potentiometers
40
174 BS EN 61189-3-719:2016
Test methods for electrical materials, printed boards
and other interconnection structures and assemblies.
Test methods for interconnection structures (printed
boards). Monitoring of single plated-through hole
(PTH) resistance change during temperature cycling
18
175
IEC 60195:2016
Replaces: IEC
60195:1965
Method of measurement of current noise generated in
fixed resistors 58
176 IEC 60335-2-113:2016
Household and similar electrical appliances - Safety -
Part 2-113: Particular requirements for cosmetic and
beauty care appliances incorporating lasers and intense
light sources
42
177 IEC 60335-2-97:2016 Household and similar electrical appliances - Safety - 43
Page 17
17
Replaces: IEC 60335-2-
97:2002+
AMD1:2004+
AMD2:2008 CSV
Part 2-97: Particular requirements for drives for
shutters, awnings, blinds and similar equipment
178
IEC 60384-14-2:2016
Replaces: IEC 60384-14-
2:2004
Fixed capacitors for use in electronic equipment - Part
14-2: Blank detail specification - Fixed capacitors for
electromagnetic interference suppression and
connection to the supply mains - Safety tests only
24
179 IEC 60702-3:2016
Mineral insulated cables and their terminations with a
rated voltage not exceeding 750 V - Part 3: Guide for
use
25
180
IEC 60747-2:2016
Replaces: IEC 60747-
2:2000
Semiconductor devices - Part 2: Discrete devices -
Rectifier diodes 91
181
IEC 60747-6:2016
Replaces: IEC 60747-
6:2000
Semiconductor devices - Part 6: Discrete devices -
Thyristors 254
182
IEC 61000-1-2:2016
Replaces: IEC TS 61000-
1-2:2008
Electromagnetic compatibility (EMC) - Part 1-2:
General - Methodology for the achievement of
functional safety of electrical and electronic systems
including equipment with regard to electromagnetic
phenomena
149
183 IEC 61156-10:2016
Multicore and symmetrical pair/quad cables for digital
communications - Part 10: Cables for cords with
transmission characteristics up to 2 GHz - Sectional
specification
17
184 IEC 61156-9:2016
Multicore and symmetrical pair/quad cables for digital
communications - Part 9: Cables for channels with
transmission characteristics up to 2 GHz - Sectional
specification
17
185 IEC 61300-2-37:2016
Replaces: IEC 61300-2-
Fibre optic interconnecting devices and passive
components - Basic test and measurement procedures - 20
Page 18
18
37:2006 Part 2-37: Tests - Cable bending for fibre optic
closures
186 IEC 61671-2:2016 Standard for automatic test markup language (ATML)
instrument description 42
187 IEC 61671-4:2016 Standard for automatic test markup language (ATML)
test configuration 45
188 IEC 61671-5:2016 Standard for automatic test markup language (ATML)
test adapter description 18
189 IEC 61671-6:2016 Standard for automatic test markup language (ATML)
test station description 23
190
IEC 62343-3-1:2016
Replaces: IEC 62343-3-
1:2010
Dynamic modules - Part 3-1: Performance
specification templates - Dynamic channel equalizers 10
191
IEC 62439-2:2016
Replaces: IEC 62439-
2:2010
Industrial communication networks - High availability
automation networks - Part 2: Media Redundancy
Protocol (MRP)
325
192
IEC 62439-5:2016
Replaces: IEC 62439-
5:2010
Industrial communication networks - High availability
automation networks - Part 5: Beacon Redundancy
Protocol (BRP)
104
193
IEC 62591:2016
Replaces: IEC
62591:2010
Industrial networks - Wireless communication
network and communication profiles -
WirelessHART™
1043
194 IEC 62595-2-1:2016 Display lighting unit - Part 2-1: Electro-optical
measuring methods of LED backlight unit 16
195 IEC 62610-5:2016
Mechanical structures for electrical and electronic
equipment - Thermal management for cabinets in
accordance with IEC 60297 and IEC 60917 series -
Part 5: Cooling performance evaluation for indoor
cabinets
37
196 IEC 62822-1:2016 Electric welding equipment - Assessment of
restrictions related to human exposure to 59
Page 19
19
electromagnetic fields (0 Hz to 300 GHz) - Part 1:
Product family standard
197 IEC 62822-2:2016
Electric welding equipment - Assessment of
restrictions related to human exposure to
electromagnetic fields (0 Hz to 300 GHz) - Part 2: Arc
welding equipment
78
198 IEC 62841-2-8:2016
Electric motor-operated hand-held tools, transportable
tools and lawn and garden machinery - Safety - Part 2-
8: Particular requirements for hand-held shears and
nibblers
25
199 IEC TR 61850-90-8:2016
Communication networks and systems for power
utility automation - Part 90-8: Object model for E-
mobility
79
200 IEC TR 62351-12:2016
Power systems management and associated
information exchange - Data and communications
security - Part 12: Resilience and security
recommendations for power systems with distributed
energy resources (DER) cyber-physical systems
107
201
IEC TS 62668-1:2016
Replaces: IEC TS 62668-
1:2014
Process management for avionics - Counterfeit
prevention - Part 1: Avoiding the use of counterfeit,
fraudulent and recycled electronic components
70
202 PD IEC/TR 61850-90-
8:2016
Communication networks and systems for power
utility automation. Object model for E-mobility 84
203
PD IEC/TS 62668-1:2016
Replace; PD IEC/TS
62668-1:2014
Process management for avionics. Counterfeit
prevention. Avoiding the use of counterfeit, fraudulent
and recycled electronic components
74
Giao thông – Vận tải Trở về đầu trang
204 BS ISO 15765-4:2016
Road vehicles. Diagnostic communication over
Controller Area Network (DoCAN). Requirements for
emissions-related systems
27
205 BS ISO 13400-4:2016 Road vehicles. Diagnostic communication over 78
Page 20
20
Internet Protocol (DoIP). Ethernet-based high-speed
data link connector
206
ISO 10924-1:2016
Replace: ISO 10924-
1:2009
Road vehicles -- Circuit breakers -- Part 1: Definitions
and general test requirements 15
207 ISO 10924-5:2016 Road vehicles -- Circuit breakers -- Part 5: Circuit
breakers with bolt with rated voltage of 450 V 10
208
ISO 13674-2:2016
Replace: ISO 13674-
2:2006
Road vehicles -- Test method for the quantification of
on-centre handling -- Part 2: Transition test 15
209
ISO 14513:2016
Replace: ISO
14513:2006; ISO
14513:2006/Cor 1:2007
Road vehicles -- Pedestrian protection -- Head impact
test method 12
210
ISO 15031-3:2016
Replace: ISO 15031-
3:2004
Road vehicles -- Communication between vehicle and
external equipment for emissions-related diagnostics --
Part 3: Diagnostic connector and related electrical
circuits: Specification and use
5
211
ISO 15500-2:2016
Replace: ISO 15500-
2:2012
Road vehicles -- Compressed natural gas (CNG) fuel
system components -- Part 2: Performance and general
test methods
10
212
ISO 15765-2:2016
Replace: ISO 15765-
2:2011
Road vehicles -- Diagnostic communication over
Controller Area Network (DoCAN) -- Part 2:
Transport protocol and network layer services
51
213
ISO 15765-4:2016
Replace: ISO 15765-
4:2011; ISO 15765-
4:2011/Amd 1:2013
Road vehicles -- Diagnostic communication over
Controller Area Network (DoCAN) -- Part 4:
Requirements for emissions-related systems
27
214 ISO 24534-3:2016
Intelligent transport systems -- Automatic vehicle and
equipment identification -- Electronic registration
identification (ERI) for vehicles -- Part 3: Vehicle data
13
Page 21
21
215 ISO/PAS 19295:2016 Electrically propelled road vehicles -- Specification of
voltage sub-classes for voltage class B 11
Tàu thủy Trở về đầu trang
216
BS ISO 18421:2016
Replace:BS ISO
18421:2013
Ships and marine technology. Inland navigation
vessels. Lifebuoy housings. 16
217 ISO 15364:2016
Replace: ISO 15364:2007
Ships and marine technology -- Pressure/vacuum
valves for cargo tanks 27
Cơ khí – Chế tạo Trở về đầu trang
218 BS 8611:2016 Robots and robotic devices. Guide to the ethical
design and application of robots and robotic systems. 28
219
BS ISO 21940-12:2016
Replace: BS ISO
11342:1998
Mechanical vibration. Rotor balancing. Procedures
and tolerances for rotors with flexible behaviour 46
220 ISO 10360-10:2016
Geometrical product specifications (GPS) --
Acceptance and reverification tests for coordinate
measuring systems (CMS) -- Part 10: Laser trackers
for measuring point-to-point distances
42
221 ISO 25178-1:2016 Geometrical product specifications (GPS) -- Surface
texture: Areal -- Part 1: Indication of surface texture 25
222 ISO 3040:2016
Replace: ISO 3040:2009
Geometrical product specifications (GPS) --
Dimensioning and tolerancing -- Cones 24
223 JIS B 1166:2015/AMD 1 T-slot bolts (Amendment 1) 1
224 JIS B 1171:2015/AMD 1 Cup head square neck bolts 1
225 JIS B 1173:2015/AMD 1 Studs 1
226 JIS B 1176:2015/AMD 1 Hexagon socket head cap screws (Amendment 1) 1
227 JIS B 1178:2015/AMD 1 Foundation bolts (Amendment 1) 1
228 JIS B 1179:2015/AMD 1 Flat head bolts (Amendment 1) 1
229 JIS B 1182:2015/AMD 1 Square head bolts (Amendment 1) 2
Page 22
22
230 JIS B 1189:2015/AMD 1 Hexagon bolts with flange (Amendment 1) 1
231 JIS B 1195:2015/AMD 1 Weld bolts (Amendment 1) 1
232 JIS B 1723:2015
Replace:JIS B 1723:1977 Dimensions of cylindrical worm gears 20
233
JIS B 8826-1:2015
Replace:JIS B 8826-
1:2004
Cranes-- Access, guards and restrints -- Part 1;
General 25
234 JIS C 3408;2014
Replace:JIS C 3408:2000 Travelling cables for elevators 19
Luyện kim – Sản phẩm kim loại Trở về đầu trang
235
ASTM A488/A488M - 16
Revises: ASTM
A488/A488M–12
Standard Practice for Steel Castings, Welding,
Qualifications of Procedures and Personnel 19
236
ASTM A505 - 16
Revises: ASTM A505–
121
Standard Specification for Steel, Sheet and Strip,
Alloy, Hot-Rolled and Cold-Rolled, General
Requirements for
13
237 ASTM E536 - 16 Revises:
ASTM E536–15
Standard Test Methods for Chemical Analysis of Zinc
and Zinc Alloys 6
238
BS EN 10305-2:2016
Replace: BS EN 10305-
2:2010
Steel tubes for precision applications. Technical
delivery conditions. Welded cold drawn tubes 28
239
BS EN ISO 11970:2016
Replace:BS EN ISO
11970:2007
Specification and qualification of welding procedures
for production welding of steel castings. 28
240
BS EN ISO 16773-
2:2016Replace: BS EN
ISO 16773-2:2007
Electrochemical impedance spectroscopy (EIS) on
coated and uncoated metallic specimens. Collection of
data
34
241 ISO 16132:2016
Replace: ISO 16132:2004
Ductile iron pipes and fittings -- Seal coats for cement
mortar linings 16
242 ISO 17745:2016 Steel wire ring net panels -- Definitions and 16
Page 23
23
specifications
243
ISO 22034-2:2016
Replace: ISO 22034-
2:2007
Steel wire and wire products -- Part 2: Tolerances on
wire dimensions 6
244 ISO/TR 945-3:2016 Microstructure of cast irons -- Part 3: Matrix structures 42
245 JIS G 2402:2015
Replace:JIS G 2402;2009 Aluminium dros for iron and steel making 4
246 JIS G 2403:2015
Replace:JIS G 2403:2003
Aluminium dross for iron and steel making ---
Sampling and samole preparation procedures 10
Xây dựng – Vật liệu xây dựng Trở về đầu trang
247
ASTM C109/C109M -
16a Revises: ASTM
C109/C109M–16
Standard Test Method for Compressive Strength of
Hydraulic Cement Mortars (Using 2-in. or [50-mm]
Cube Specimens)
10
248
ASTM C138/C138M - 16
Revises: ASTM
C138/C138M–14
Standard Test Method for Density (Unit Weight),
Yield, and Air Content (Gravimetric) of Concrete 4
249
ASTM C1696 - 16
Revises: ASTM C1696–
15
Standard Guide for Industrial Thermal Insulation
Systems 36
250
ASTM C1696 - 16
Revises: ASTM C1696–
15
Standard Guide for Industrial Thermal Insulation
Systems 36
251 ASTM C171 - 16
Revises: ASTM C171–07
Standard Specification for Sheet Materials for Curing
Concrete 2
252
ASTM C192/C192M - 16
Revises: ASTM
C192/C192M–15
Standard Practice for Making and Curing Concrete
Test Specimens in the Laboratory 8
253
ASTM C272/C272M - 16
Revises: ASTM
C272/C272M–12
Standard Test Method for Water Absorption of Core
Materials for Sandwich Constructions 4
254 ASTM C297/C297M - 16 Standard Test Method for Flatwise Tensile Strength of 8
Page 24
24
Revises: ASTM
C297/C297M–15
Sandwich Constructions
255
ASTM C33/C33M - 16
Revises: ASTM
C33/C33M–13
Standard Specification for Concrete Aggregates 11
256
ASTM C364/C364M - 16
Revises: ASTM
C364/C364M–07
(Reapproved 2012)
Standard Test Method for Edgewise Compressive
Strength of Sandwich Constructions 8
257
ASTM C364/C364M - 16
Revises: ASTM
C364/C364M–07
(Reapproved 2012)
Standard Test Method for Edgewise Compressive
Strength of Sandwich Constructions 8
258
ASTM C393/C393M - 16
Revises: ASTM
C393/C393M–11ε1
Standard Test Method for Core Shear Properties of
Sandwich Constructions by Beam Flexure 8
259
ASTM C480/C480M - 16
Revises: ASTM
C480/C480M–08
(Reapproved 2015)
Standard Test Method for Flexure Creep of Sandwich
Constructions 5
260 ASTM C937 - 16
Revises: ASTM C937–10
Standard Specification for Grout Fluidifier for
Preplaced-Aggregate Concrete 3
261 ASTM C938 - 16
Revises: ASTM C938–10
Standard Practice for Proportioning Grout Mixtures
for Preplaced-Aggregate Concrete 3
262
ASTM C940 - 16
Revises: ASTM C940–
10a
Standard Test Method for Expansion and Bleeding of
Freshly Mixed Grouts for Preplaced-Aggregate
Concrete in the Laboratory
3
263
ASTM D6841 - 16
Revises: ASTM D6841–
15
Standard Practice for Calculating Design Value
Treatment Adjustment Factors for Fire-Retardant-
Treated Lumber
7
264 ASTM D7250/D7250M -
16 Revises: ASTM
Standard Practice for Determining Sandwich Beam
Flexural and Shear Stiffness 7
Page 25
25
D7250/D7250M–06
(Reapproved 2012)
265 ASTM G201 - 16
Revises: ASTM G201–09
Standard Practice for Conducting Exposures in
Outdoor Glass-Covered Exposure Apparatus with Air
Circulation
7
266 ISO 12578:2016 Replace:
ISO 12578:2008
Timber structures -- Glued laminated timber --
Component performance requirements 14
267 ISO 18324:2016 Timber structures -- Test methods -- Floor vibration
performance 13
268 ISO 19049:2016 Timber structures -- Test method -- Static load tests
for horizontal diaphragms including floors and roofs 9
269
JIS A 1470-1:2014
Replace:JIS A 1470-
1:2008
Determination of water vapour adsorption/desorption
properties for building materials. Part 1: Response to
humidity variation
45
270
JIS A 1902-1:2015
Replace:JIS A 1902-
1:2006
Determination of the emission of volatile organic
compounds and aldehydes for building products.
Sampling, preparation of test specimens and testing
condition. Part 1: Boards, wallpaper and floor
materials
13
271
JIS A 1902-2:2015
Replace:JIS A 1902-
2:2006
Determination of the emission of volatile organic
compounds and aldehydes for building products.
Sampling, preparation of test specimens and testing
condition. Part 2: Adhesives
13
272
JIS A 1902-3:2015
Replace:JIS A 1902-
3:2006
Determination of the emission of volatile organic
compounds and aldehydes for building products.
Sampling, preparation of test specimens and testing
condition. Part 3: Paints and coating materials
7
273
JIS A 1902-4:2015
Replace:JIS A 1902-
4:2006
Determination of the emission of volatile organic
compounds and aldehydes for building products.
Sampling, preparation of test specimens and testing
condition. Part 4: Heat - insulating material boards
15
274 JIS A 1905-1:2015 Performance test of sorptive building materials of 40
Page 26
26
Replace:JIS A 1905-
1:2007
reducing indoor air pollution with small chamber --
Part 1: Measurement of constant concentrantion of
formaldehyde
275
JIS A 1905-2:2015
Replace:JIS A 1905-
2:2007
Performance test of sorptive building materials of
reducing indoor air pollution with small chamber --
Part 2: Measurement of capability for suppressing
formaldehyde emission
18
276 JIS A 1911:2015
Replace:JIS A 1911:2006
Determination of the emission of formaldehyde for
building materials and building related products. Large
chamber method
30
277 JIS A 1912:2015
Replace:JIS A 1912:2008
Determination of the emission of volatile organic
compounds and aldehydes without formaldehyde for
building materials and building related products --
Large chamber method
29
Hóa học Trở về đầu trang
278
ASTM E1257 - 16
Revises: ASTM E1257–
93 (Reapproved 2008)
Standard Guide for Evaluating Grinding Materials
Used for Surface Preparation in Spectrochemical
Analysis
5
279
ASTM C1458 - 16
Revises: ASTM C1458–
09ε1
Standard Test Method for Nondestructive Assay of
Plutonium, Tritium and 241Am by Calorimetric Assay
13
Chất dẻo – Cao su Trở về đầu trang
280
ASTM D1824 - 16
Revises: ASTM D1824–
95 (Reapproved 2010)
Standard Test Method for Apparent Viscosity of
Plastisols and Organosols at Low Shear Rates 3
281
ASTM D3410/D3410M -
16 Revises: ASTM
D3410/D3410M–03
(Reapproved 2008)
Standard Test Method for Compressive Properties of
Polymer Matrix Composite Materials with
Unsupported Gage Section by Shear Loading
16
282
ASTM F2763 - 16
Revises: ASTM F2763–
11
Standard Specification for 12 to 60 in. [300 to 1500
mm] Dual and Triple Profile-Wall Polyethylene (PE)
Pipe and Fittings for Sanitary Sewer Applications
7
Page 27
27
283
ASTM F521 - 16 Revises:
ASTM F521–83
(Reapproved 2010)
Standard Test Methods for Bond Integrity of
Transparent Laminates 9
284 ISO 10571:2016 Replace:
ISO 10571:2011
Tyres for mobile cranes and similar specialized
machines 9
285
ISO 2782-1:2016
Replace: ISO 2782-
1:2012
Rubber, vulcanized or thermoplastic -- Determination
of permeability to gases -- Part 1: Differential-pressure
methods
18
Nhiên liệu sinh học - Thiết bị công nghiệp dầu mỏ Trở về đầu trang
286
BS EN ISO 17827-1:2016
Replace: BS EN 15149-
1:2010
Solid biofuels. Determination of particle size
distribution for uncompressed fuels. Oscillating screen
method using sieves with apertures of 3,15 mm and
above
18
287
BS EN ISO 17830:2016
Replace: BS EN
16126:2012
Solid biofuels. Particle size distribution of
disintegrated pellets. 20
288 ISO 16148:2016 Replace:
ISO 16148:2006
Gas cylinders -- Refillable seamless steel gas cylinders
and tubes -- Acoustic emission examination (AT) and
follow-up ultrasonic examination (UT) for periodic
inspection and testing
7
Khoáng sản - Phân bón Trở về đầu trang
289
BS ISO 7404-1:2016
Replace:BS 6127-1:1995,
ISO 7404-1:1994
Methods for the petrographic analysis of coals.
Vocabulary 18
290 ISO 14820-1:2016 Fertilizers and liming materials -- Sampling and
sample preparation -- Part 1: Sampling 47
291 ISO 14820-2:2016 Fertilizers and liming materials -- Sampling and
sample preparation -- Part 2: Sample preparation 7
292 ISO 15604:2016
Fertilizers -- Determination of different forms of
nitrogen in the same sample, containing nitrogen as
nitric, ammoniacal, urea and cyanamide nitrogen
19
Page 28
28
293 ISO 18644:2016 Fertilizers and soil conditioners -- Controlled-release
fertilizer -- General requirements 6
294 ISO 25475:2016 Fertilizers -- Determination of ammoniacal nitrogen 12
295 ISO 25705:2016
Fertilizers -- Determination of urea condensates using
high-performance liquid chromatography (HPLC) --
Isobutylidenediurea and crotonylidenediurea (method
A) and methylen-urea oligomers (method B)
17
Da - Giấy - Sơn và Vecni Trở về đầu trang
296 BS EN ISO 19071:2016
Leather. Chemical tests. Determination of chromium
(VI) and the reductive potential for chromium tanning
agents.
18
297
BS ISO 8254-3:2016
Replace:BS ISO 8254-
3:2004
Paper and board. Measurement of specular gloss.
20$0D gloss with a converging beam, TAPPI method 22
298
ISO 8254-3:2016
Replace: ISO 8254-
3:2004
Paper and board -- Measurement of specular gloss --
Part 3: 20 degree gloss with a converging beam,
TAPPI method
10
299
BS EN ISO 7784-1:2016
Replace:BS EN ISO
7784-1:2006, BS 3900-
E14:2006
Paints and varnishes. Determination of resistance to
abrasion. Method with abrasive-paper covered wheels
and rotating test specimen
18
Gốm sứ - Dệt may Trở về đầu trang
300 ISO 14704:2016 Replace:
ISO 14704:2008
Fine ceramics (advanced ceramics, advanced technical
ceramics) -- Test method for flexural strength of
monolithic ceramics at room temperature
28
301 ISO 19635:2016
Fine ceramics (advanced ceramics, advanced technical
ceramics) -- Test method for antialgal activity of
semiconducting photocatalytic materials
12
302 ISO 18163:2016 Clothing -- Digital fittings -- Vocabulary and
terminology used for the virtual garment 15
303 ISO 18254-1:2016 Textiles -- Method for the detection and determination 10
Page 29
29
of alkylphenol ethoxylates (APEO) -- Part 1: Method
using HPLC-MS
304 ISO 18831:2016 Clothing -- Digital fittings -- Attributes of virtual
garments 16
Vật liệu Trở về đầu trang
305
ASTM C273/C273M - 16
Revises: ASTM
C273/C273M–11
Standard Test Method for Shear Properties of
Sandwich Core Materials 7
306
ASTM C363/C363M - 16
Revises: ASTM
C363/C363M–09
(Reapproved 2015)
Standard Test Method for Node Tensile Strength of
Honeycomb Core Materials 4
307
ASTM C394/C394M - 16
Revises: ASTM
C394/C394M–13
Standard Test Method for Shear Fatigue of Sandwich
Core Materials 6
308
ASTM D6416/D6416M -
16 Revises: ASTM
D6416/D6416M–01
(Reapproved 2012)
Standard Test Method for Two-Dimensional Flexural
Properties of Simply Supported Sandwich Composite
Plates Subjected to a Distributed Load
12
309
ASTM D6772/D6772M -
16 Revises: ASTM
D6772/D6772M–15
Standard Test Method for Dimensional Stability of
Sandwich Core Materials 5
310
ASTM D6790/D6790M -
16 Revises: ASTM
D6790/D6790M–14
Standard Test Method for Determining Poisson's Ratio
of Honeycomb Cores 4
311
ASTM D7336/D7336M -
16 Revises: ASTM
D7336/D7336M–12
Standard Test Method for Static Energy Absorption
Properties of Honeycomb Sandwich Core Materials
312
ASTM E2336 - 16
Revises: ASTM E2336–
14
Standard Test Methods for Fire Resistive Grease Duct
Enclosure Systems 15
313 ISO 15901-1:2016 Evaluation of pore size distribution and porosity of 19
Page 30
30
Replace: ISO 15901-
1:2005; ISO 15901-
1:2005/Cor 1:2007
solid materials by mercury porosimetry and gas
adsorption -- Part 1: Mercury porosimetry
314 ISO 18886:2016 Refractory test-piece preparation -- Gunning refractory
panels by wet gunning techniques 7
Thực phẩm Trở về đầu trang
315
BS EN ISO 15753:2016
Replace: BS EN ISO
15753:2006+A1:2011
Animal and vegetable fats and oils. Determination of
polycyclic aromatic hydrocarbons. 32
316 BS EN ISO 18744:2016
Microbiology of the food chain. Detection and
enumeration of Cryptosporidium and Giardia in fresh
leafy green vegetables and berry fruits.
32
317 ISO 662:2016 Replace:
ISO 662:1998
Animal and vegetable fats and oils -- Determination of
moisture and volatile matter content 7
318
ISO 8968-4:2016 (IDF
20-4) Replace: ISO 8968-
4:2001 (IDF 20-4:2001);
ISO 8968-5:2001 (IDF
20-5:2001)
Milk and milk products -- Determination of nitrogen
content -- Part 4: Determination of protein and non-
protein nitrogen content and true protein content
calculation (Reference method)
11
319 ISO/TS 22002-6:2016 Prerequisite programmes on food safety -- Part 6: Feed
and animal food production 13
Thức ăn chăn nuôi Trở về đầu trang
320 BS EN 16802:2016
Foodstuffs. Determination of elements and their
chemical species. Determination of inorganic arsenic
in foodstuffs of marine and plant origin by anion-
exchange HPLC-ICP-MS.
18
Y tế - Thiết bị y tế Trở về đầu trang
321 BS EN ISO 3950:2016 Dentistry. Designation system for teeth and areas of
the oral cavity. 16
322 BS EN ISO 8537:2016
Replace: BS EN ISO
Sterile single-use syringes, with or without needle, for
insulin. 40
Page 31
31
8537:2008
323 BS ISO 29821-2:2016 Condition monitoring and diagnostics of machines.
Ultrasound. Procedures and validation 20
324 ISO 18556:2016 Dentistry -- Intraoral spatulas 5
325 ISO 29821-2:2016
Replace: ISO/CD 29821
Condition monitoring and diagnostics of machines --
Ultrasound -- Part 2: Procedures and validation 9
326 ISO/TS 16973:2016
Respiratory protective devices -- Classification for
respiratory protective device (RPD), excluding RPD
for underwater application
30
Tinh dầu Trở về đầu trang
327 BS ISO 8896:2016 Essential oil of caraway 16
Sản phẩm sinh học Trở về đầu trang
328 BS EN 16751:2016 Bio-based products. Sustainability criteria. 36
Môi trường – An toàn Trở về đầu trang
329 ASTM E3012 - 16 Standard Guide for Characterizing Environmental
Aspects of Manufacturing Processes 10
330 BS EN 16778:2016 Protective gloves. The determination of
Dimethylformamide in gloves. 16
331 BS ISO 11665-11:2016
Measurement of radioactivity in the environment. Air:
radon-222. Test method for soil gas with sampling at
depth
36
332 ISO 11665-11:2016
Measurement of radioactivity in the environment --
Air: radon-222 -- Part 11: Test method for soil gas
with sampling at depth
25
333 ISO 17520:2016
Space environment (natural and artificial) -- Cosmic
ray and solar energetic particle penetration inward the
magnetosphere -- Method of determination of the
effective vertical cut-off rigidity
11
334
ISO 7240-24:2016
Replace: ISO 7240-
24:2010; ISO 7240-
Fire detection and fire alarm systems -- Part 24: Fire
alarm loudspeakers 39
Page 32
32
24:2010/Amd 1:2013
Chất lượng đất – Chất lượng nước Trở về đầu trang
335 ISO 18187:2016 Soil quality -- Contact test for solid samples using the
dehydrogenase activity of Arthrobacter globiformis 26
336 ISO 17183:2016
Soil quality -- Screening soils for isopropanol-
extractable organic compounds by determining
emulsification index by light attenuation
11
337 ISO 18635:2016
Water quality -- Determination of short-chain
polychlorinated alkanes (SCCPs) in sediment, sewage
sludge and suspended (particulate) matter -- Method
using gas chromatography-mass spectrometry (GC-
MS) and electron capture negative ionization (ECNI)
33
338 ISO 17943:2016
Water quality -- Determination of volatile organic
compounds in water -- Method using headspace solid-
phase micro-extraction (HS-SPME) followed by gas
chromatography-mass spectrometry (GC-MS)
43
339 ISO 5667-24:2016
Replace: ISO 5776:1983
Water quality -- Sampling -- Part 24: Guidance on the
auditing of water quality sampling 34
Dụng cụ đo – Phương pháp thử nghiệm Trở về đầu trang
340
BS EN ISO 12707:2016
Replace: BS EN 1330-
7:2005
Non-destructive testing. Magnetic particle testing.
Vocabulary. 14
341 JIS B 7411-1:2014
Replace:JIS B 7411:1997
Glas thermometers for general --- Part 1; General
measuring instruments 25
342 JIS B 7411-2:2014
Replace:JIS B 7411:1997
Glas thermometers for general --- Part 2: Measuring
instruments used in transaction or certification 20
Tài liệu hướng dẫn Trở về đầu trang
343 BS ISO 17741:2016 General technical rules for measurement, calculation
and verification of energy savings of projects. 30
344 ISO 1043-4:1998/Amd
1:2016 Code numbers 1
Page 33
33
345
ISO 15489-1:2016
Replace: ISO 15489-
1:2001
Information and documentation -- Records
management -- Part 1: Concepts and principles 20
346 ISO 17741:2016 General technical rules for measurement, calculation
and verification of energy savings of projects 18
Page 34
34
Thư viện Trường Đại học Công Nghiệp TP.HCM phối hợp với Trung tâm thông tin khoa
học và công nghệ TP.HCM cung cấp thông tin toàn văn dành cho người sử dụng thư viện trong
trường (SV, GV, HVCH, CBVC...) có nhu cầu học tập, nghiên cứu, tham khảo. Để gửi và nhận thông
tin, xin vui lòng liên hệ:
1. Thư viện Đại học Công Nghiệp TP.HCM: Gửi thông tin yêu cầu bằng 1 trong các phương tiện
sau:
+ Cổng thông tin Thư viện: http://lib.iuh.edu.vn tại mục "Yêu cầu tin";
+ Facebook: http://facebook.com/libiuh - Gửi qua "Tin nhắn" trên Page;
+ Liên hệ Phòng Nghiệp vụ: Phan Minh Trí – 0919.8989.33 - ĐT: (08) 38940390 (130) - Email:
[email protected]
2. Phòng đảm bảo thông tin của trung tâm thông tin khoa học và công nghệ TP.HCM
Địa chỉ: 79 Trương Định - Q1 - TP.HCM
ĐT: (08)38243826: (08)38297040 Ext: 202-203-216) Fax: 38291957
Website: www.cesti.gov.vn Email: [email protected]
Lưu ý
1/ Khi đến gửi yêu cầu thông tin, bạn nhớ mang theo thẻ sinh viên, thẻ giảng viên của trường.
2/ Thông tin được cung cấp miễn phi, ngoại trừ chi phí: in ấn tài liệu, mua tài liệu (nếu có)
Thư viện Trường Đại học Công nghiệp Thành phố H Chí Minh.