TIÊU CHUẨN MỚI SỐ 01&02/2018 - lib.iuh.edu.vnlib.iuh.edu.vn/wp-content/uploads/2018/03/Bantin_Tieuchuan_0102-2018.pdf · Thiết bị điện gia dụng và thiết bị điện

Dịch vụ Cung cấp Thông tin Trọn gói Tháng 01&02/2018 1/25

TRƯỜNG ĐH CÔNG NGHIỆP TP. HỒ CHÍ MINH

TRUNG TÂM THÔNG TIN – THƯ VIỆN

TIÊU CHUẨN MỚI SỐ 01&02/2018

TIÊU CHUẨN – QUY CHUẨN – VĂN BẢN KỸ THUẬT ĐO LƯỜNG VIỆT NAM ................................. 2

Tổ chức, quản lý và chất lượng công ty ............................................................................................................... 2

An toàn trong gia đình .......................................................................................................................................... 2

Hệ thống và kết cấu cơ khí ................................................................................................................................... 2

Kỹ thuật điện (máy biến áp) ................................................................................................................................. 3

Thiết bị xếp dỡ vật liệu (thiết bị nâng) ................................................................................................................ 3

Công nghệ hóa chất .............................................................................................................................................. 3

Luyện kim ............................................................................................................................................................. 4

TIÊU CHUẨN NƯỚC NGOÀI ............................................................................................................................. 4

Vấn đề chung. Thuật ngữ. Tiêu chuẩn hóa. Tư liệu (khoa học thông tin, đại lượng và đơn vị, từ vựng, sản

phẩm kỹ thuật) ........................................................................................................................................................... 4

Vận tải ................................................................................................................................................................... 4

Dịch vụ. Tổ chức, quản lý và chất lượng công ty ............................................................................................... 5

Công nghệ sinh học .............................................................................................................................................. 5

Công nghệ chăm sóc sức khỏe ............................................................................................................................. 5

Môi trường. Bảo vệ sức khỏe. An toàn ................................................................................................................ 6

Đo lường và phép đo ............................................................................................................................................ 9

Thử nghiệm ......................................................................................................................................................... 10

Hệ thống và kết cấu cơ khí ................................................................................................................................. 10

Hệ thống và kết cấu chất lỏng ............................................................................................................................ 11

Chế tạo ................................................................................................................................................................ 11

Năng lượng và truyền nhiệt ................................................................................................................................ 11

Kỹ thuật điện ...................................................................................................................................................... 11

Điện tử ................................................................................................................................................................ 11

Viễn thông .......................................................................................................................................................... 13

Công nghệ thông tin ........................................................................................................................................... 13

Công nghệ ảnh .................................................................................................................................................... 14

Phương tiện giao thông đường bộ ...................................................................................................................... 14

Đường sắt ............................................................................................................................................................ 14

Đóng tàu và kết cấu tàu thủy .............................................................................................................................. 14

Kỹ thuật máy bay và tàu vũ trụ .......................................................................................................................... 15

Thiết bị xếp dỡ vật liệu ....................................................................................................................................... 18

Nông nghiệp ....................................................................................................................................................... 18

Công nghệ thực phẩm ........................................................................................................................................ 18


Công nghệ hóa chất ............................................................................................................................................ 19

Khai thác mỏ và khoáng sản .............................................................................................................................. 19

Dầu mỏ ................................................................................................................................................................ 19

Luyện kim ........................................................................................................................................................... 20

Công nghệ chế biến gỗ ....................................................................................................................................... 20

Thủy tinh và gốm ............................................................................................................................................... 21

Cao su và chất dẻo .............................................................................................................................................. 21

Giấy ..................................................................................................................................................................... 21

Sơn và chất màu ................................................................................................................................................. 21

Vật liệu xây dựng ............................................................................................................................................... 22

Xây dựng dân dụng ............................................................................................................................................ 24

Thiết bị gia dụng và thương mại giải trí. Thể thao ............................................................................................ 25

TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4

Tiêu chuẩn – Quy chuẩn – Văn bản kỹ thuật đo lường Việt Nam

Tổ chức, quản lý và chất lượng công ty Trở về đầu trang

1 TCVN 11863:2017

Phương pháp thống kê đánh giá độ không đảm bảo –

Hướng dẫn đánh giá độ không đảm bảo sử dụng thiết

kế chéo hai yếu tố

28

2 TCVN 11864:2017

Phương pháp định lượng trong cải tiến quá trình –

Six sigma – Năng lực của nhân sự chủ chốt và tổ

chức khi triển khai six sigma và lean

61

3 TCVN 11865-1:2017 Khía cạnh thống kê của lấy mẫu vật liệu dạng đống –

Phần 1: Nguyên tắc chung 103

4 TCVN 11865-2:2017 Khía cạnh thống kê của lấy mẫu vật liệu dạng đống –

Phần 2: Lấy mẫu vật liệu dạng hạt 120

An toàn trong gia đình (thiết bị điện) Trở về đầu trang

5 TCVN 5699-2-6:2017 Thay

thế TCVN 5699-2-6:2010

Thiết bị điện gia dụng và thiết bị điện tương tự - An

toàn – Phần 2-6: Yêu cầu cụ thể đối với lò liền bếp,

bếp, lò và các thiết bị tương tự đặt tĩnh tạị

54

6 TCVN 5699-2-9:2017 Thay

thế TCVN 5699-2-9:2010


toàn – Phần 2-9: Yêu cầu cụ thể đối với vỉ nướng,

máy nướng bánh mỳ và các thiết bị nấu di động

tương tự

49

7 TCVN 5699-2-40:2017 Thay

thế TCVN 5699-2-40:2007


toàn – Phần 2-40: Yêu cầu cụ thể đối với bơm nhiệt,

máy điều hòa không khí và máy hút ẩm

83

Hệ thống và kết cấu cơ khí Trở về đầu trang

8 TCVN 7578-1:2017

Tính toán khả năng tải của bánh răng thẳng và bánh

răng nghiêng – Phần 1: Nguyên lý cơ bản, giới thiệu

và các hệ số ảnh hưởng chung

128

9 TCVN 7578-5:2017 Tính toán khả năng tải của bánh răng thẳng và bánh

răng nghiêng – Phần 5: Độ bền và chất lượng của vật 53


liệu

10 TCVN 12131:2017


răng nghiêng – Ứng dụng cho các bánh răng dùng

trong hàng hải

68

11 TCVN 12132:2017


răng nghiêng – Ứng dụng cho các bánh răng dùng

trong công nghiệp

69

12 TCVN 12133:2017 Bánh răng côn – Hệ thống độ chính xác theo ISO

17485:2006 39

Kỹ thuật điện (máy biến áp) Trở về đầu trang

13 TCVN 6306-13:2017 Máy biến áp điện lực – Phần 13: Máy biến áp chứa

chất lỏng loại tự bảo vệ 20

14 TCVN 8096-202:2017 Cụm đóng cắt và điều khiển cao áp- Phần 202: Trạm

biến áp lắp sẵn cao áp/hạ áp 100

Thiết bị xếp dỡ vật liệu (thiết bị nâng) Trở về đầu trang

15 TCVN 5205-2:2017 Thay thế

TCVN 5205-2:2008

Cần trục – Cabin và trạm điều khiển – Phần 2: Cần

trục tự hành 10

16 TCVN 7761-2:2017 Thay thế

TCVN 7761-2:2007

Cần trục – Thiết bị giới hạn và thiết bị chỉ báo – Phần

2: Cần trục tự hành 16

17 TCVN 8854-2:2017 Thay thế:

TCVN 8854-2:2011

Cần trục – Sơ đồ và đặc tính điều khiển – Phần 2:

Cần trục tự hành 14

18 TCVN 12156:2017 Cần trục – Quy trình thử và quy trình kiểm tra 15

19 TCVN 12157:2017 Cần trục – Yêu cầu đối với tải trọng thử 9

20 TCVN 12158:2017 Cần trục – An toàn – Thiết bị mang tải chuyên dùng 56

21 TCVN 12159:2017 Cần trục – Thiết kế chung – Trạng thái giới hạn và

kiểm nghiệm khả năng chịu tải của móc thép rèn 88

22 TCVN 12160:2017 Cần trục – Kiểm nghiệm khả năng chịu tải của kết

cấu thép 102

23 TCVN 12161:2017 Cần trục – Đo độ lệch của bánh xe 15

24 TCVN 12162-2:2017

Cần trục –Xác định thực nghiệm khả năng làm việc

của cần trục tự hành – Phần 2: Khả năng làm việc của

kết cấu khi chịu tải trọng tĩnh

50

Công nghệ hóa chất Trở về đầu trang

25 TCVN 7962:2017 Thay thế

TCVN 7962:2008

Mẫu chuẩn – Nội dung của giấy chứng nhận, nhãn và

tài liệu kèm theo 17

26 TCVN 8890:2017 Thay thế

TCVN 8890:2011 Mẫu chuẩn – Thuật ngữ và định nghĩa 16

27

TCVN 8891:2017 Thay thế

TCVN 8891:2011 và TCVN

8056:2008

Mẫu chuẩn – Thực hành tốt trong sử dụng mẫu chuẩn 41

28 TCVN 11862:2017

Mẫu chuẩn – Thiết lập và thể hiện liên kết chuẩn đo

lường của các giá trị đại lượng được ấn định cho mẫu

chuẩn

36


Luyện kim Trở về đầu trang

29 TCVN 12143:2017

Anốt hóa nhôm và hợp kim nhôm – Kiểm tra tính

liên tục của lớp phủ anốt hóa mỏng – Thử bẳng

sunfat đồng

6

30 TCVN 12144:2017

Anốt hóa nhôm và hợp kim nhôm – Xác định khối

lượng trên một đơn vị diện tích ( mật độ bề mặt) của

lớp phủ anốt hóa – Phương pháp trọng lực

10

31 TCVN 12145:2017

Anốt hóa nhôm và hợp kim nhôm – Thử nhanh độ

bền chịu sáng của lớp phủ anốt hóa có màu sử dụng

ánh sáng nhân tạo

11

32 TCVN 12146:2017

Anốt hóa nhôm và hợp kim nhôm – Đánh giá sự mất

khả năng hấp thụ của lớp phủ anốt hóa sau bịt kín –

Thử vết đốm màu bằng xử lý axit sơ bộ

10

33 TCVN 12147:2017 Anốt hóa nhôm và hợp kim nhôm – Xác định điện áp

đánh thủng 8

34 TCVN 12148:2017

Anốt hóa nhôm và hợp kim nhôm – Đánh giá chất

lượng của lớp phủ anốt hóa đã bịt kín bằng phép đo

độ dẫn nạp

10

35 TCVN 12149:2017

Anốt hóa nhôm và hợp kim nhôm –– Đánh giá chất

lượng của lớp phủ anốt hóa đã bịt kín bằng phép đo

tổn thất khối lượng sau khi nhúng chìm trong dung

dịch axit

12

36 TCVN 12150:2017

Anốt hóa nhôm và hợp kim nhôm – Đánh giá độ bền

chống tạo thành vết nứt do biến dạng của lớp phủ

anốt hóa

9

37 TCVN 12151:2017

Anốt hóa nhôm và hợp kim nhôm – Xác định độ bền

so sánh chịu ánh sáng cực tím và nhiệt độ của lớp

phủ anốt hóa có màu

8

38 TCVN 12152:2017 Anốt hóa nhôm và hợp kim nhôm – Thuật ngữ và

định nghĩa 21

Tiêu chuẩn nước ngoài

Vấn đề chung. Thuật ngữ. Tiêu chuẩn hóa. Tư liệu (khoa học thông

tin, đại lượng và đơn vị, từ vựng, sản phẩm kỹ thuật) Trở về đầu trang

39 ISO 20247:2018 Information and documentation — International

library item identifier(ILII) 4

40 ISO 18794:2018 Coffee — Sensory analysis — Vocabulary 12

41 ASTM E1655-17 Replaces:

ASTM E1655-05

Standard Practices for Infrared Multivariate

Quantitative Analysis 30

42 DIN 1301-3 Units - Part 3: Conversion of non-SI units 37

43 DIN 6779-13

Structuring principles for technical products and

technical product documentation - Part 13: Chemical

plants

35

Vận tải Trở về đầu trang

44 ISO/TR 16401-1:2018

Replaces: ISO/TR 16401-

Electronic fee collection — Evaluation of equipment

for conformity to ISO/TS 17575-2 — Part 1: Test 152


1:2012 suite structure and test purposes

45

ISO/TR 16401-2:2018

Replaces: ISO/TS 16401-

2:2012

Electronic fee collection — Evaluation of equipment

for conformity to ISO 17575-2 — Part 2: Abstract

test suite

10

46

BS EN ISO 16410-1:2017

Replaces: DD CEN ISO/TS

16410-1:2011

Electronic fee collection. Evaluation of equipment

for conformity to ISO 17575-3. Test suite structure

and test purposes

172

47

BS EN ISO 16407-1:2017

Replaces: DD CEN ISO/TS

16407-1:2011

Electronic fee collection. Evaluation of equipment

for conformity to ISO 17575-1. Test suite structure

and test purposes

116

Dịch vụ. Tổ chức, quản lý và chất lượng công ty Trở về đầu trang

48

BS EN ISO/IEC 17011:2017

Replaces: BS EN ISO/IEC

17011:2004

Conformity assessment. Requirements for

accreditation bodies accrediting conformity

assessment bodies

36

49 ISO 18841:2018 Interpreting services — General requirements and

recommendations 16

50 IEC 60335-2-71:2018 (Điện)

Household and similar electrical appliances - Safety -

Part 2-71: Particular requirements for electrical

heating appliances for breeding and rearing animals

37

51 IEC 60335-2-71:2018

Household and similar electrical appliances - Safety -

Part 2-71: Particular requirements for electrical

heating appliances for breeding and rearing animals

37

52 ASTM F2275-17 Replaces:

ASTM F2275-10

Standard Practice for Treestand Manufacturer

Quality Assurance Program 2

Công nghệ sinh học Trở về đầu trang

53 ISO 20391-1:2018 Biotechnology — Cell counting — Part 1: General

guidance on cell counting methods 16

Công nghệ chăm sóc sức khỏe Trở về đầu trang

54 ISO 13408-2:2018 Replaces:

ISO 13408-2:2003

Aseptic processing of health care products — Part 2:

Sterilizing filtration 34

55 ISO 11737-1:2018 Replaces:

ISO 11737-1:2006

Sterilization of health care products —

Microbiological methods — Part 1: Determination of

a population of microorganisms on products

48

56 ISO 19090:2018

Tissue-engineered medical products — Bioactive

ceramics — Method to measure cell migration in

porous materials

33

57

ISO 21533:2018 Replaces;

ISO 21533:2003; ISO

21533:2003/Cor 1:2009

Dentistry — Reprocessable cartridge syringes for

intraligamentary injections 8

58 ISO 15002:2008/Amd.1:2018

Flow-metering devices for connection to terminal

units of medical gas pipeline systems

AMENDMENT 1

1

59 ISO/TR 14283:2018

Replaces; ISO/TR 14283:2004

Implants for surgery — Essential principles of safety

and performance 20

60 IEC 60601-2-76:2018 PRV Medical Electrical Equipment - Part 2-76: Particular 53


requirements for the basic safety and essential

performance of low energy ionized gas haemostasis

equipment

61 IEC TR 61948-3:2018 Nuclear medicine instrumentation - Routine tests -

Part 3: Positron emission tomographs 11

62 ASTM F2129-17b Replaces:

ASTM F2129-17

Standard Test Method for Conducting Cyclic

Potentiodynamic Polarization Measurements to

Determine the Corrosion Susceptibility of Small

Implant Devices

9

63 ASTM F3141-17a Replaces:

ASTM F3141-17

Standard Guide for Total Knee Replacement Loading

Profiles 33

64 DIN 13111 Medical instruments - Bandage scissors 5

65 DIN 19410 Dentistry - Intraoral camera 21

66 DIN 58951-2

Sterilization - Steam sterilizers for laboratory use -

Part 2: Apparatus requirements, requirements on

services and installation

31

67 DIN EN 12791

Chemical disinfectants and antiseptics - Surgical

hand disinfection - Test method and requirements

(phase 2, step 2); German version EN

12791:2016+A1:2017

36

68

BS EN ISO 11616:2017

Replaces: BS EN ISO

11616:2012

Health informatics. Identification of medicinal

products. Data elements and structures for unique

identification and exchange of regulated

pharmaceutical product information

42

Môi trường. Bảo vệ sức khỏe. An toàn Trở về đầu trang

69 ISO 18639-3:2018 PPE ensembles for firefighters undertaking specific

rescue activities — Part 3: Clothing 15

70 ISO/TS 19620:2018

Water quality — Determination of arsenic(III) and

arsenic(V) species — Method using high

performance liquid chromatography (HPLC) with

detection by inductively coupled plasma mass

spectrometry (ICP-MS) or hydride generation atomic

fluorescence spectrometry (HG-AFS)

41

71 ISO/IEC 20243-2:2018

Information technology — Open Trusted Technology

ProviderTM Standard (O-TTPS) — Mitigating

maliciously tainted and counterfeit products —

Part 2: Assessment procedures for the O-TTPS and

ISO/IEC 20243-1:2018

33


rescue activities — Part 6: Footwear 18


rescue activities — Part 1: General 17

74 ISO 20595:2018

Water quality. Determination of selected highly

volatile organic compounds in water. Method using

gas chromatography and mass spectrometry by static

headspace technique (HS-GC-MS)

24


75 IEC TR 61511-0:2018

Functional safety - Safety instrumented systems for

the process industry sector - Part 0: Functional safety

for the process industry and IEC 61511

8

76 IEC 61511:2018 SER Functional safety - Safety instrumented systems for

the process industry sector - ALL PARTS 1185

77 IEC 60825:2018 SER Safety of laser products - ALL PARTS 836

78 IEC 61482-2:2018 PRV

Live working - Protective clothing against the

thermal hazards of an electric arc - Part 2:

Requirements

56

79 IEC 61511:2018 SER Functional safety - Safety instrumented systems for

the process industry sector - ALL PARTS 1185

80 IEC TR 61511-0:2018

Functional safety - Safety instrumented systems for

the process industry sector - Part 0: Functional safety

for the process industry and IEC 61511

8

81 IEC 62046:2018 PRV Safety of machinery - Application of protective

equipment to detect the presence of persons 92

82 ISO/IEC 20243-2:2018

Information technology - Open Trusted Technology

ProviderTM Standard (O-TTPS) - Mitigating

maliciously tainted and counterfeit products - Part 2:

Assessment procedures for the O-TTPS and ISO/IEC

20243-1:2018

33

83 ASTM F479-06(2017)

Replaces: ASTM F479-06

Standard Specification for In-Service Care of

Insulating Blankets 5

84 ASTM F1516-13(2018)


Standard Practice for Sealing Seams of Resilient

Flooring Products by the Heat Weld Method (when

Recommended)

2


ASTM F2547-06(2013)

Standard Test Method for Determining the

Attenuation Properties in a Primary X-ray Beam of

Materials Used to Protect Against Radiation

Generated During the Use of X-ray Equipment

4


ASTM F2890-12

Standard Guide for Hazard Awareness for Search and

Rescue Personnel 3

87 BS EN ISO 19238:2017

Replaces: BS ISO 19238:2004

Radiological protection. Performance criteria for

service laboratories performing biological dosimetry

by cytogenetics

38

88

BS EN 15004-10:2017

Replaces: BS EN 15004-

10:2008

Fixed firefighting systems. Gas extinguishing

systems. Physical properties and system design of gas

extinguishing systems for IG-541

14

89

BS EN 15004-9:2017


9:2008

Fixed firefighting system. Gas extinguishing systems.

Physical properties and system design of gas

extinguishing systems for IG-55 extinguishant

14

90 BS EN ISO 19085-3:2017

Woodworking machines. Safety requirements.

Numerically controlled (NC) boring and routing

machines

76

91 BS EN 50131-2-2:2017

Replaces: BS EN 50131-2-

Alarm systems. Intrusion and hold-up systems.

Intrusion detectors. Passive infrared detectors 48


2:2008

92 BS EN ISO 19340:2017 Water quality. Determination of dissolved

perchlorate. Method using ion chromatography (IC) 32

93 DIN 1239

Coverings for wells, spring water chambers and other

water supply construction - Principles for

construction

20

94 DIN 2001-2

Drinking water supply from small units and non

stationary plants - Part 2: Non stationary units -

Guidelines for drinking water, planning, construction,

operation and maintenance of units

40

95 DIN 3553

Fittings for drinking water systems in buildings -

Leakage protection systems with sensors and

automated shut-off devices - Detectors for

installation in drinking water installations -

Requirements and tests

12

96 DIN 14011 Firefighting and fire protection - Terms and

definitions 61

97 DIN 14701-1

High rise aerial appliance for fire fighting and rescue

services - Part 1: Hydraulic platforms (HPs) in

accordance to DIN EN 1777 - Tactical classification

and terms and performance requirements of

telescopic articulated platforms (TGM)

18

98 DIN 19279

Photocatalytic activity of surfaces - Determination of

the photocatalytic deposition velocity of nitrogen

monoxide at photocatalytically active surfaces

18

99 DIN 19627 Ozone generation plants for water treatment 19

100 DIN 54113-1

Non-destructive testing - Radiation protection rules

for the technical application of X-ray equipment up

to 1MV - Part 1: Technical safety requirements and

testing for the manufacture, installation and operation

24

101 DIN EN 342

Protective clothing - Ensembles and garments for

protection against cold; German version EN

342:2017

28

102 DIN EN 388/A1 Protective gloves against mechanical risks; German

and English version EN 388:2016/prA1:2017 14

103 DIN EN 1147 Beiblatt 1

Portable ladders for fire brigade in accordance to

DIN EN 1147 - Supplement 1: Stick ladder, hook

ladder, extending ladder, sectional ladder, socket

part, connector for sectional ladder, multifunction

ladder

33

104 DIN EN 1366-3

Fire resistance tests for service installations - Part 3:

Penetration seals; German and English version prEN

1366-3:2018

354

105 DIN EN 13138-2 Buoyant aids for swimming instruction - Part 2:

Safety requirements and test methods for buoyant

aids to be held; German and English version prEN

56


13138-2:2018

106 DIN EN 13138-3

Buoyant aids for swimming instruction - Part 3:

Safety requirements and test methods for swim seats

to be worn; German and English version prEN

13138-3:2018

113

107 DIN EN 13138-4

Buoyant aids for swimming instruction - Part 4: In

water performance, requirements and test procedures

for Class B swimming devices; German and English

version prEN 13138-4:2018

56

108 DIN EN 13277-8

Protective equipment for martial arts - Part 8:

Additional requirements and test methods for karate

face protectors; German version EN 13277-8:2017

18

109 DIN EN 13819-1

Hearing protectors - Testing - Part 1: Physical test

methods; German and English version prEN 13819-

1:2018

105

110 DIN EN 13819-2

Hearing protectors - Testing - Part 2: Acoustic test

methods; German and English version prEN 13819-

2:2018

29

111 DIN EN 1501-1

Refuse collection vehicles - General requirements

and safety requirements - Part 1: Rear loaded refuse

collection vehicles; German and English version

prEN 1501-1:2018

160

112 DIN EN 1501-2


and safety requirements - Part 2: Side loaded refuse

collection vehicles; German and English version

prEN 1501-2:2018

108

113 DIN EN 1501-3

Refuse collection vehicles and their associated lifting

devices - General requirements and safety

requirements - Part 3: Front loaded refuse collection

vehicles; German and English version prEN 1501-

3:2018

101

114 DIN EN 1501-5


and safety requirements - Part 5: Lifting devices for

refuse collection vehicles; German and English

version prEN 1501-5:2018 (Môi trường)

192

Đo lường và phép đo Trở về đầu trang

115 ISO/TR 15377:2018

Replaces: ISO/TR 15377:2007

Measurement of fluid flow by means of pressure-

differential devices — Guidelines for the

specification of orifice plates, nozzles and Venturi

tubes beyond the scope of ISO 5167

31

116

ISO 3822-3:2018 Replaces:

ISO 3822-3:1997; ISO 3822-

3:1997/Amd 1: 2009

Acoustics — Laboratory tests on noise emission from

appliances and equipment used in water supply

installations — Part 3: Mounting and operating

conditions for in-line valves and appliances

8

117 IEC 61340-4-5:2018 RLV Electrostatics - Part 4-5: Standard test methods for

specific applications - Methods for characterizing the

electrostatic protection of footwear and flooring in

55


combination with a person

118 IEC 62055-41:2018 PRV

Electricity metering - Payment systems - Part 41:

Standard transfer specification (STS) - Application

layer protocol for one-way token carrier systems

248

119 IEC 62631-3-11:2018

Dielectric and resistive properties of solid insulating

materials - Part 3-11: Determination of resistive

properties (DC Methods) - Volume resistance and

volume resistivity - Method for impregnation and

coating materials

248

120 IEC TS 62903:2018

Ultrasonics - Measurements of electroacoustical

parameters and acoustic output power of spherically

curved transducers using the self-reciprocity method

47

121 IEC PAS 63151:2018

Measurement procedure for the assessment of

specific absorption rate of human exposure to radio

frequency fields from hand-held and body-mounted

wireless communication devices - Vector

measurement-based systems (Frequency range of 30

MHz to 6 GHz)

127


ASTM F2216-12

Standard Specification for Selectorized Strength

Equipment 17

123

BS EN ISO 19017:2017

Replaces: BS ISO 14850-

1:2004

Guidance for gamma spectrometry measurement of

radioactive waste 56

124

BS EN 12697-10:2017


10:2001

Bituminous mixtures. Test methods. Compactability 16

125 DIN 878

Geometrical product specifications (GPS) -

Mechanical dial gauges - Limits for metrological

characteristics

6

126 DIN 2241

Geometrical product specifications (GPS) - Screw

setting gauges for measuring instruments for ISO

metric screw threads; setting plug gauges and setting

ring gauges from 1 mm to 100 mm nominal thread

diameter

12

127 DIN 5032-11 Photometry - Part 11: Near-field goniophotometers,

terms, characteristics and their classification 36

128 DIN 30734

Interchangeable single-chamber silos (free fall) for

use with lift-off and dumper vehicles - Connecting

dimensions and requirements

22

Thử nghiệm Trở về đầu trang

129 DIN EN 12679

Non destructive testing - Determination of the size of

industrial radiographic sources - Radiographic

method; German and English version prEN

12679:2017

24

Hệ thống và kết cấu cơ khí Trở về đầu trang

130 DIN 967 Cross recessed pan head screws with collar - Product 8


grade A

131 DIN 2191-2 Springs - Measuring- and test statistic - Part 2: Cold

formed cylindrical tension springs 21

132 DIN 3292 Fittings for domestic installation - Nonferrous metal

union nuts 9

133 DIN 3966-3

Worms and worm wheel - Part 3: Information to be

given to the manufacturer by the purchaser in order

to obtain the gear required

16

134 DIN 4000-90 Tabular layouts of properties - Part 90: Tool holders

for indexable inserts 40

Hệ thống và kết cấu chất lỏng Trở về đầu trang

135 DIN 18197 Sealing of joints in concrete with waterstops 53

136 DIN EN 593 Industrial valves - Metallic butterfly valves for

general purposes; German version EN 593:2017 38

Chế tạo Trở về đầu trang

137 DIN 4856 Carbon-based films and other hard coatings -

Rockwell penetration test to evaluate the adhesion 10

138 DIN 8471

Garden tools - Non-motorized hand-held tools for

using in soil - Performance characteristics -

Requirements and testing

18

139 DIN 53100

Metallic coatings - Electroplated coatings of nickel

plus chromium and of copper plus nickel plus

chromium on plastics materials

23

Năng lượng và truyền nhiệt Trở về đầu trang

140 DIN 19752 Hydropower plants - Planning, execution and

operation 20

141 DIN 25493

Nuclear facilities - Protection of metallic surfaces of

structural parts from damage from assembly aids,

gaskets, packings, packaging material and thermal

insulating materials

25

Kỹ thuật điện Trở về đầu trang

142 DIN 16873

Pipes and fittings of unplasticized poly(vinyl

chloride) (PVC-U) for cable ducting - Dimensions

and technical delivery conditions

24

143 DIN 16874

Pipes of high-density polyethylene (PE-HD) for

buried telecommunication - Dimensions and

technical delivery conditions

18

Điện tử Trở về đầu trang

144 IEC 60191-1:2018

Mechanical standardization of semiconductor devices

- Part 1: General rules for the preparation of outline

drawings of discrete devices

36

145 IEC 60191-1:2018

Mechanical standardization of semiconductor devices

- Part 1: General rules for the preparation of outline

drawings of discrete devices

36


146 IEC 60512-8-3:2018

Connectors for electrical and electronic equipment -

Tests and measurements - Part 8-3: Static load tests

(fixed connectors) - Test 8c: Robustness of actuating

lever

17

147 IEC 60512-15-2:2018


Tests and measurements - Part 15-2: Connector tests

(mechanical) - Test 15b: Insert retention in housing

(axial)

16

148 IEC 60749-26:2018

Semiconductor devices - Mechanical and climatic

test methods - Part 26: Electrostatic discharge (ESD)

sensitivity testing - Human body model (HBM)

106

149 IEC PAS 61076-3-126:2018


Product requirements - Part 3-126: Rectangular

connectors - Detail specification for 5 pole power

connector for industrial environments with push-pull

locking

42

150 IEC 61249-2-45:2018

Materials for printed boards and other

interconnecting structures - Part 2-45: Reinforced

base materials clad and unclad - Non-halogenated

epoxide non-woven/woven E-glass reinforced

laminate sheets of thermal conductivity 1,0 W/(m•K)

and defined flammability (vertical burning test),

copper-clad for lead-free assembly

22

151 IEC 61249-2-46:2018








22

152 IEC 61249-2-47:2018








22

153 IEC 62228-1:2018 Integrated circuits - EMC evaluation of transceivers -

Part 1: General conditions and definitions 8

154 IEC 62610-2:2018 PRV

Mechanical structures for electrical and electronic

equipment - Thermal management for cabinets in

accordance with IEC 60297 and IEC 60917 series -

Part 2: Method for the determination of forced air

cooling

40

155 IEC 62906-5-4:2018 Laser display devices - Part 5-4: Optical measuring

methods of colour speckle 51

156 BS IEC 62679-3-3:2016 Electronic paper displays. Optical measuring 44


methods for displays with integrated lighting units

Viễn thông Trở về đầu trang

157 IEC 62731:2018 Text-to-speech for television - General requirements 19

158

BS EN 62351-7:2017

Replaces: DD IEC/TS 62351-

7:2010

Power systems management and associated

information exchange. Data and communications

security. Network and System Management (NSM)

data object models

240

Công nghệ thông tin Trở về đầu trang

159 ISO/IEC 19286:2018 Identification cards — Integrated circuit cards —

Privacy-enhancing protocols and services 76

160 ISO/IEC 23000-16:2018

Information technology — Multimedia application

format (MPEG-A) — Part 16: Publish/Subscribe

Application Format

27

161 ISO/IEC TR 20547-2:2018

Information technology — Big data reference

architecture — Part 2: Use cases and derived

requirements

252

162 ISO/IEC 23000-19:2018

Information technology — Multimedia application

format (MPEG-A) — Part 19: Common media

application format (CMAF) for segmented media

106

163 ISO 17972-4:2018 Replaces;

ISO 17972-4:2015

Graphic technology — Colour data exchange format

(CxF/X) — Part 4: Spot colour characterisation data

(CxF/X-4)

13

164 ISO/IEEE 11073-

10424:2016/Cor.1:2018

Health informatics — Personal health device

communication - Part 10424: Device specialization -

Sleep apnoea breathing therapy equipment (SABTE)

TECHNICAL CORRIGENDUM 1

27

165 ISO/IEC/IEEE 8802-

1Q:2016/Amd.2:2018

Information technology — Telecommunications and

information exchange between systems — Local and

metropolitan area networks — Specific

requirements — Part 1Q: Bridges and bridged

networks AMENDMENT 2: Application virtual local

area network (VLAN) type, length, value (TLV)

89

166 ISO 19157:2013/Amd.1:2018

Geographic information — Data quality

AMENDMENT 1: Describing data quality using

coverages

6

167 ISO/IEC 23003-

4:2015/AMD1:2017

Amendment 1 - Information technology - MPEG

audio technologies - Part 4: Dynamic Range Control

- Parametric DRC, gain mapping and equalization

tools

139

168 ISO/IEC 23009-6:2017

Information technology - Dynamic adaptive

streaming over HTTP (DASH) - Part 6: DASH with

server push and WebSockets

35

169 ISO/IEC TR 38502:2017 Information technology - Governance of IT -

Framework and model 11

170 IEC 61131:2018 SER Programmable controllers - ALL PARTS 2049


171 ISO/IEC/IEEE 8802-

1Q:2016

Information technology - Telecommunications and

information exchange between systems - Local and

metropolitan area networks - Specific requirements -

Part 1Q: Bridges and bridged networks

89

172 ISO/IEC 19286:2018 Identification cards - Integrated circuit cards -

Privacy-enhancing protocols and services 76

173 ISO/IEC TR 20547-2:2018

Information technology - Big data reference

architecture - Part 2: Use cases and derived

requirements

252

174 ISO/IEC 23000-16:2018

Information technology - Multimedia application

format (MPEG-A) - Part 16: Publish/Subscribe

Application Format

27

175 ISO/IEC 23000-19:2018

Information technology - Multimedia application

format (MPEG-A) - Part 19: Common media

application format (CMAF) for segmented media

106

176

177

BS ISO/IEC 14882:2017

Replaces: BS ISO/IEC

14882:2014

Programming languages. C++ 1620

178 BS ISO/IEC 11801-6:2017 Information technology. Generic cabling for

customer premises. Distributed building services 46

179 BS ISO/IEC 11801-2:2017 Information technology. Generic cabling for

customer premises. Office premises 32

Công nghệ ảnh Trở về đầu trang

180 ISO 12636:2018 Replaces:

ISO 12636:1998 Graphic technology - Blankets for offset printing 11

181 ISO/IEC 12034-1:2017 Information technology. Archive eXchanfe Format

(AXF). Par 1: Sructure and semantics 101

Phương tiện giao thông đường bộ Trở về đầu trang

182 ISO 20077-2:2018

Road Vehicles — Extended vehicle (ExVe)

methodology — Part 2: Methodology for designing

the extended vehicle

21

183 DIN EN 1762

Rubber hoses and hose assemblies for liquefied

petroleum gas, LPG (liquid or gaseous phase), and

natural gas up to 25 bar (2,5 MPa) - Specification;

German and English version prEN 1762:2018

45

Đường sắt Trở về đầu trang

184 IEC 62973-1:2018 PRV Railway applications - Batteries for auxiliary power

supply systems - Part 1: General requirements 76

185 BS EN 14478:2017 Replaces:

BS EN 14478:2005 Railway applications. Braking. Generic vocabulary 84

Đóng tàu và kết cấu tàu thủy Trở về đầu trang

186 ISO/PAS 21195:2018

Ships and marine technology — Systems for the

detection of persons while going overboard from

ships (Man overboard detection)

16


187 ISO 20313:2018 Ships and marine technology — Cathodic protection

of ships 56

188 IEC 60092:2018 SER Electrical installations in ships - ALL PARTS 1312

189 IEC 61097-7:1996+

AMD1:2018 CSV

Global maritime distress and safety system (GMDSS)

- Part 7: Shipborne VHF radiotelephone transmitter

and receiver - Operational and performance

requirements, methods of testing and required test

results

144

190 IEC 61162-460:2018 PRV

Maritime navigation and radiocommunication

equipment and systems - Digital interfaces - Part 460:

Multiple talkers and multiple listeners - Ethernet

interconnection - Safety and security

145

191

BS EN ISO 12217-2:2017

Replaces: BS EN ISO 12217-

2:2015

Small craft. Stability and buoyancy assessment and

categorization. Sailing boats of hull length greater

than or equal to 6 m

104

192 DIN 83407 Closing devices (fasteners) and fork plates for ship's

equipment 15

193 DIN 85051-1

Pressfitting systems for pipes for use in shipbuilding

- General requirements and test methods - Part 1:

Operating pressures up to 16 bar

28

194 DIN 86004-3

Ships and marine technology - Low-corrosion design,

measures and operation of pipework - Part 3: Plastic

piping systems

8

195 DIN 86015

Pipework of unplasticized polyvinyl chloride (PVC-

U) on ships, with solvent-cement joints - Use,

application, installation

23

196 DIN 86028 Welding necks of CuNi10Fe1,6Mn - Technical

specifications 9

197 DIN 86041-1 Welding flanges - Part 1: Tanks and sea boxes,

nominal pressure 10 and 16 8

198 DIN 86041-2 Welding flanges - Part 2: Outboard connections,

nominal pressure 10, 16, 40 8

199 DIN 86086 Fittings for butt welding into copper-nickel-alloy

pipelines - Technical specifications 10

Kỹ thuật máy bay và tàu vũ trụ Trở về đầu trang

200

ASTM F3066/F3066M-17

Replaces: ASTM

F3066/F3066M-15

Standard Specification for Aircraft Powerplant

Installation Hazard Mitigation 7

201 BS EN ISO 20785-1:2017 Dosimetry for exposures to cosmic radiation in

civilian aircraft. Conceptual basis for measurements 36

202 BS EN 2174:2017

Aerospace series. Heat resisting alloy FE-PA2602

(X4NiCrTiMoV26-15). Solution treated and

precipitation treated. Forgings. De ≤ 100 mm - Rm ≥

850 MPa

12

203 BS EN 4533-003:2017 Aerospace series. Fibre optic systems. Handbook. 22



003:2006

Looming and installation practices

204 DIN EN 2037

Aerospace series - Hexagonal steel bars drawn -

Dimensions - Tolerances h 11 and h 12; German and

English version EN 2037:2017

17

205 DIN EN 2306

Aerospace series - Heat resisting - Nickel base alloy

Ni-Cr20Co3Fe3 - Annealed - Bars; German and


17

206 DIN EN 2369

Aerospace series - Wires, heat resisting alloys -

Diameter 0,2 mm <= D <= 8 mm - Dimensions;

German and English version FprEN 2369:2017

13

207 DIN EN 2812 Aerospace series - Stripping of electric cables;

German and English version FprEN 2812:2017 41

208 DIN EN 2850

Aerospace series - Carbon fibre thermosetting resin -

Unidirectional laminates - Compression test parallel

to fibre direction; German and English version EN

2850:2017

34

209 DIN EN 2944

Aerospace series - Inserts, screw thread, helical coil,

self-locking, in corrosion resisting steel FE-PA3004;


19

210 DIN EN 3094

Aerospace series - Sealants - Test method -

determination of the application time; German and


14

211 DIN EN 3155-004

Aerospace series - Electrical contacts used in

elements of connection - Part 004: Contacts,

electrical, male, type A, crimp, class T - Product

standard; German and English version FprEN 3155-

004:2017

32

212 DIN EN 3155-005

Aerospace series - Electrical contacts used in

elements of connection - Part 005: Contacts,

electrical, female, type A, crimp, class T - Product


005:2017

32

213 DIN EN 3475-701

Aerospace series - Cables, electrical, aircraft use -

Test methods - Part 701: Strippability and adherence

of insulation to the conductor; German and English

version EN 3475-701:2017

14

214 DIN EN 3475-707

Aerospace series - Cables, electrical, aircraft use -

Test methods - Part 707: Stabilization of assembly;

German and English version EN 3475-707:2017

10

215 DIN EN 3542

Aerospace series - Inserts, screw thread, helical coil,

self-locking, in heat resisting nickel base alloy NI-

PH2801 (Inconel X750); German and English

version FprEN 3542:2017

22

216 DIN EN 3745-506

Aerospace series - Fibres and cables, optical, aircraft

use - Test methods - Part 506: Impact resistance;

German and English version FprEN 3745-506:2017

18


217 DIN EN 3904

Aerospace series - Washers, wire locking in

aluminium alloy, anodized; German and English

version EN 3904:2017

14

218 DIN EN 4122

Aerospace series - Shank nuts, self-locking, in heat

resisting steel FE-PA2601 (A286), silver plated on

thread - Classification: 1100 MPa (at ambient

temperature) / 650 °C; German and English version

FprEN 4122:2017

16

219 DIN EN 4123


resisting nickel base alloy NI-PH2601 (Inconel 718),

silver plated on thread - Classification: 1550 MPa (at

ambient temperature) / 600 °C; German and English

version FprEN 4123:2017

14

220 DIN EN 4124


resisting nickel base alloy NI-PH1302 (Waspaloy),

silver plated on thread, for 60° swage -

Classification: 1210 MPa (at ambient temperature) /

730 °C; German and English version FprEN

4124:2017

16

221 DIN EN 4652-421

Aerospace series - Connectors, coaxial, radio

frequency - Part 421: Type 4, C interface - Crimp

assembly version - Right angle plug - Product

standard; German and English version EN 4652-

421:2017

26

222 DIN EN 4730

Aerospace series - Anthropometric dimensioning of

aircraft seats; German and English version FprEN

4730:2017

84

223 DIN EN 4839-001

Aerospace series - Arc fault circuit breakers, three-

poles, temperature compensated, rated current 3 A to

25 A - 115 V a.c. 400 Hz constant frequency - Part

001: Technical specification; German and English

version FprEN 4839-001:2017

43

224 DIN EN 4839-003

Aerospace series - Arc Fault Circuit breakers, three-

pole, temperature compensated, rated currents 3 A to

25 A, 115/200 V a.c. 400 Hz constant frequency -

Part 003: Without auxiliary contacts - Product


003:2017

26

225 DIN EN 4840-001

Aerospace series - Heat shrinkable moulded shapes -

Part 001: Technical specification; German and

English version FprEN 4840-001:2017

22

226 DIN EN 6018

Aerospace series - Test methods for metallic

materials - Determination of density according to

displacement method; German and English version

EN 6018:2017

10

227 DIN EN 6049-001 Aerospace series - Electrical cables, installation -

Protection sleeve in meta-aramid fibres - Part 001:

Technical specification; German and English version

34


FprEN 6049-001:2017

228 DIN EN 6049-003

Aerospace series - Electrical cables, installation -

Protection sleeve in meta-aramid fibres - Part 003:

Braided, tubular, expandable - Product standard;


18

229 DIN EN 6109

Aerospace series - Static seal elements elastomer,

moulded, phosphate ester resistant - Technical

specification; German and English version FprEN

6109:2017

38

230 DIN EN 9115

Quality Management Systems - Requirements for

Aviation, Space and Defense Organizations -

Deliverable Software (Supplement to EN 9100);


61

231 DIN EN 9146

Aerospace series - Foreign Object Damage (FOD)

Prevention Program - Requirements for Aviation,

Space, and Defence Organizations; German and

English version FprEN 9146:2017

22

232 DIN EN 9300-200

Aerospace series - LOTAR - LOng Term Archiving

and Retrieval of digital technical product

documentation such as 3D, CAD and PDM data -

Part 200: Common Concepts for Long term

Archiving and Retrieval of Product Structure

Information; German and English version FprEN

9300-200:2017

100

233 DIN EN 12016

Electromagnetic compatibility - Product family

standard for lifts, escalators and moving walks -

Immunity; German and English version prEN

12016:2018

50

Thiết bị xếp dỡ vật liệu Trở về đầu trang

234 BS EN ISO 16001:2017

Replaces: BS ISO 16001:2008

Earth-moving machinery. Object detection systems

and visibility aids. Performance requirements and

tests

82

235 DIN EN 1175*VDE 0117 Safety of industrial trucks - Electrical/electronic

requirements; German version prEN 1175:2017 196

Nông nghiệp Trở về đầu trang

236 ISO 4254-8:2018 Replaces:

ISO 4254-8:2009

Agricultural machinery — Safety — Part 8: Solid

fertilizer distributors 16

Công nghệ thực phẩm Trở về đầu trang

237 DIN 10500/A2

Food hygiene - Sales vehicles and mobile sales

stands for perishable foodstuffs - Hygiene

requirements, testing; Amendment 2

6

238 DIN 10503 Beiblatt 1

Food hygiene; Supplement 1: Flow diagram for the

utilization in the HACCP-concept - Symbols, kind of

presentation

12

239 DIN EN 12042/A1 Food processing machinery - Automatic dough

dividers - Safety and hygiene requirements; German 18


and English version EN 12042:2014/prA1:2017

Công nghệ hóa chất Trở về đầu trang

240 ISO 19619:2018

Surface active agents — Determination of free

propylene oxide content in propylene oxide adduct

surfactants — GC method

10

241 ASTM D2712-17 Replaces:

ASTM D2712-91(2010)

Standard Test Method for Determination of

Hydrocarbon Impurities in High Purity Propylene by

Gas Chromatography

6

242 DIN 28125-4 Hinged closures - Round - Part 4: Light Version,

Nominal Diameter DN 150 to DN 800 13

243 DIN 51918 Testing of carbonaceous materials - Determination of

bulk density and the open porosity 10

244 DIN EN 1406

Chemicals used for treatment of water intended for

human consumption - Modified starches; German

version EN 1406:2017

20

Khai thác mỏ và khoáng sản Trở về đầu trang

245 BS EN ISO 19225:2017

Replaces: BS EN 1552:2003

Underground mining machines. Mobile extracting

machines at the face. Safety requirements for shearer

loaders and plough systems

36

246 DIN 21907 Mine plans - Graphic design of sheets 29

Dầu mỏ Trở về đầu trang

247 ISO 6743-6:2018 Replaces;

ISO 6743-6:1990

Lubricants, industrial oils and related products (class

L) — Classification — Part 6: Family C (gear

systems)

8

248

ISO 12925-1:2018 Replaces:

ISO 12925-1:1996; ISO

12925-1:1996/Cor 1:2002

Lubricants, industrial oils and related products (class

L) — Family C (gears) — Part 1: Specifications for

lubricants for enclosed gear systems

44


ASTM D5762-12

Standard Test Method for Nitrogen in Liquid

Hydrocarbons, Petroleum and Petroleum Products by

Boat-Inlet Chemiluminescence

7

250 ASTM D7826-17a Replaces:

ASTM D7826-16

Standard Guide for Evaluation of New Aviation

Gasolines and New Aviation Gasoline Additives 23

251 BS EN ISO 15589-1:2017

Petroleum, petrochemical and natural gas industries.

Cathodic protection of pipeline systems. On-land

pipelines

90

252

BS EN ISO 4259-1:2017

Replaces: BS EN ISO

4259:2006, BS 2000-367:2006

Petroleum and related products. Precision of

measurement methods and results. Determination of

precision data in relation to methods of test

84

253

BS EN ISO 4259-2:2017

Replaces: BS EN ISO

4259:2006, BS 2000-367:2006

Petroleum and related products. Precision of

measurement methods and results. Interpretation and

application of precision data in relation to methods of

test

32

254

BS EN 13399:2017 Replaces:

BS EN 13399:2010, BS 2000-

517:2010

Bitumen and bituminous binders. Determination of

storage stability of modified bitumen 10


255 DIN 5499 Gross and Net Calorific Values - Terms 9

256 DIN 51430

Testing of fuel oil - Determination of red dye content

and Solvent Yellow 124 in domestic fuel oil and

mixtures of domestic fuel oil with unmarked mineral

oil - High performance liquid cromatography (HPLC)

12

257 DIN 51774-1

Testing of liquid fuels - Part 1: Determination of

bromine acceptance by electrometric Dead-Stop-

method of samples with a bromine acceptance of

more than 0,5 g/100 g (BA)

12

258 DIN 51808 Testing of lubricants - Determination of oxidation

stability of greases - Oxygen method 14

Luyện kim Trở về đầu trang

259

ISO 11437:2018 Replaces:

ISO 11437-1:1994; ISO

11437-2:1994

Nickel alloys — Determination of lead —

Electrothermal atomic absorption spectrometric

method

15

260 ISO 6507-3:2018 Replaces:

ISO 6507-3:2005

Metallic materials — Vickers hardness test — Part 3:

Calibration of reference blocks 15

261 ISO 6507-2:2018 Replaces:

ISO 6507-2:2005


Verification and calibration of testing machines 18

262 ISO 6507-1:2018 Replaces;

ISO 6507-1:2005


Test method 30

263

ASTM A484/A484M -18

Replaces: ASTM

A484/A484M-16

Standard Specification for General Requirements for

Stainless Steel Bars, Billets, and Forgings 13

264 ASTM F3213-17

Standard for Additive Manufacturing #x2013;

Finished Part Properties #x2013; Standard

Specification for Cobalt-28 Chromium-6

Molybdenum via Powder Bed Fusion

9

265 BS ISO 11437:2018 Nickel alloys. Determination of lead. Electrothermal

atomic absorption spectrometric method 22

266 DIN 50938 Black oxide coatings on ferrous metal components -

Requirements and test methods 11

267 DIN EN 10139/A1

Cold rolled uncoated low carbon steel narrow strip

for cold forming - Technical delivery conditions;

German and English version EN

10139:2016/prA1:2018

14

Công nghệ chế biến gỗ Trở về đầu trang

268 DIN 68800-1/A1 Wood preservation - Part 1: General 7

269 DIN EN 384/A1

Structural timber - Determination of characteristic

values of mechanical properties and density; German

and English version EN 384:2016/prA1:2018

10

270 DIN EN 844 Round and sawn timber - Terminology; Trilingual

version prEN 844:2018 63

271 DIN EN 847-1 Tools for woodworking - Safety requirements - Part

1: Milling tools, circular saw blades; German version 41


EN 847-1:2017

272 DIN EN 847-2

Tools for woodworking - Safety requirements - Part

2: Requirements for the shank of shank mounted

milling tools/circular saw blades; German version EN

847-2:2017

25

273 DIN 68800-1/A1 Wood preservation - Part 1: General 7

Thủy tinh và gốm Trở về đầu trang

274 ASTM C1211-18 Replaces:

ASTM C1211-13

Standard Test Method for Flexural Strength of

Advanced Ceramics at Elevated Temperatures 17


ASTM C1684-13e1

Standard Test Method for Flexural Strength of

Advanced Ceramics at Ambient

Temperature#x2014;Cylindrical Rod Strength

21

Cao su và chất dẻo Trở về đầu trang


ASTM D1646-07(2012)

Standard Test Methods for Rubber#x2014;Viscosity,

Stress Relaxation, and Pre-Vulcanization

Characteristics (Mooney Viscometer)

12

277

BS EN ISO 1825:2017

Repalces: BS EN ISO

1825:2011

Rubber hoses and hose assemblies for aircraft ground

fuelling and defuelling. Specification 34

278

BS EN ISO 10350-1:2017


1:2008+A1:2014

Plastics. Acquisition and presentation of comparable

single-point data. Moulding materials 22

279 DIN 53435 Testing of Plastics - Bending test and impact test on

dynstat test pieces 29

280 DIN 53477

Testing of plastics - Determination of particle size

distribution of moulding materials by dry sieving

analysis

8

281 DIN EN 301

Adhesives, phenolic and aminoplastic, for load-

bearing timber structures - Classification and

performance requirements; German version EN

301:2017

20

Giấy Trở về đầu trang

282

BS EN ISO 287:2017

Replaces: BS EN ISO

287:2009

Paper and board. Determination of moisture content

of a lot. Oven-drying method 18

Sơn và chất màu Trở về đầu trang

283 ISO 6270-3:2018

Paints and varnishes — Determination of resistance

to humidity — Part 3: Condensation (in-cabinet

exposure with heated, bubbling water reservoir)

7

284 ASTM D7723-17

Standard Test Method for Rubber

Property#x2014;Macro-Dispersion of Fillers in

Compounds

4

285

BS EN ISO 2812-4:2017


4:2007

Paints and varnishes. Determination of resistance to

liquids. Spotting methods 14


286

BS EN ISO 2812-1:2017


1:2007

Paints and varnishes. Determination of resistance to

liquids. Immersion in liquids other than water 14

287

BS EN ISO 12944-3:2017


3:1998

Paints and varnishes. Corrosion protection of steel

structures by protective paint systems. Design

considerations

22

288

BS EN ISO 12944-1:2017


1:1998


structures by protective paint systems. General

introduction

16

289

BS EN ISO 12944-8:2017


8:1998


structures by protective paint systems. Development

of specifications for new work and maintenance

44

290 DIN 55655-11 Paints and varnishes - Electro-deposition paints - Part

11: Bath stability 6

291 DIN 55655-12 Paints and varnishes - Electro-deposition paints - Part

12: Sedimentation on horizontal areas 7

Vật liệu xây dựng Trở về đầu trang

292 ASTM C782 -13(2018) Standard Test Method for Softness of Preformed

Tape Sealants 2


ASTM C892-10

Standard Specification for High-Temperature Fiber

Blanket Thermal Insulation 10

294 ASTM C907-17(2018)

Replaces: ASTM C907-17

Standard Test Method for Tensile Adhesive Strength

of Preformed Tape Sealants by Disk Method 3

295

ASTM C1385/C1385M-

10(2017) Replaces: ASTM

C1385/C1385M-10

Standard Practice for Sampling Materials for

Shotcrete 2

296

ASTM C1527/C1527M-


C1527/C1527M-11

Standard Specification for Travertine Dimension

Stone 2

297

ASTM D2203 -01(2018)

Replaces: ASTM D2203-

01(2007)

Standard Test Method for Staining from Sealants 3

298 ASTM D4124-09(2018)

Replaces: ASTM D4124-01

Standard Test Method for Separation of Asphalt into

Four Fractions 8

299 ASTM F2419-11(2017)


Standard Practice for Installation of Thick Poured

Gypsum Concrete Underlayments and Preparation of

the Surface to Receive Resilient Flooring

3

300 DIN 1946-6

Ventilation and air conditioning - Part 6: Ventilation

for residential buildings - General requirements,

requirements for design, construction, commissioning

and handover as well as maintenance

130

301 DIN 4109-1 Sound insulation in buildings - Part 1: Minimum

requirements 30

302 DIN 4109-2 Sound insulation in buildings - Part 2: Verification of

compliance with the requirements by calculation 88


303 DIN 18550-1

Design, preparation and application of external

rendering and internal plastering - Part 1:

Supplementary provisions for DIN EN 13914-

1:2016-09 for external rendering

22

304 DIN 18550-2

Design, preparation and application of external

rendering and internal plastering - Part 2:

Supplementary provisions for DIN EN 13914-

2:2016-09 for internal plastering

25

305 DIN EN 115-1

Safety of escalators and moving walks - Part 1:

Construction and installation; German version EN

115-1:2017

128

306 DIN EN 1015-11

Methods of test for mortar for masonry - Part 11:

Determination of flexural and compressive strength

of hardened mortar; German and English version

prEN 1015-11:2017

15

307 DIN EN 1097-2

Tests for mechanical and physical properties of

aggregates - Part 2: Methods for the determination of

resistance to fragmentation; German and English


91

308 DIN EN 1097-8

Tests for mechanical and physical properties of

aggregates - Part 8: Determination of the polished

stone value; German and English version prEN 1097-

8:2018

76

309 DIN EN 1337-1 Structural bearings - Part 1: General; German and

English version prEN 1337-1:2018 167

310 DIN EN 1337-2 Structural bearings - Part 2: Sliding elements;

German and English version prEN 1337-2:2018 166

311 DIN EN 1337-3 Structural bearings - Part 3: Elastomeric bearings;


312 DIN EN 1337-4 Structural bearings - Part 4: Roller bearings; German

and English version prEN 1337-4:2018 62

313 DIN EN 1337-5 Structural bearings - Part 5: Pot bearings; German

and English version prEN 1337-5:2018 117

314 DIN EN 1337-6 Structural bearings - Part 6: Rocker bearings;


315 DIN EN 1337-7

Structural bearings - Part 7: Spherical and cylindrical

PTFE bearings; German and English version prEN

1337-7:2018

50

316 DIN EN 1337-8

Structural bearings - Part 8: Guide bearings and

Restraint bearings; German and English version

prEN 1337-8:2018

29

317 DIN EN 12098-3

Energy Performance of Buildings - Controls for

heating systems - Part 3: Control equipment for

electrical heating systems - Modules M3-5, 6, 7, 8;

German version EN 12098-3:2017

35

318 DIN EN 12098-5 Energy Performance of Buildings - Controls for 24


heating systems - Part 5: Start-stop schedulers for

heating systems - Modules M3-5, 6, 7, 8; German

version EN 12098-5:2017

319 DIN EN 12440 Natural stone - Denomination criteria; German

version EN 12440:2017 113

320 DIN EN 13126-8

Building hardware - Hardware for windows and door

height windows - Part 8: Requirements and test

methods for Tilt and Turn, Tilt-First and Turn-Only

hardware; German version EN 13126-8:2017

35

321 DIN EN 13126-15


height windows - Requirements and test methods -

Part 15: Rollers for horizontal sliding and hardware

for sliding folding windows; German and English


65

322 DIN EN 13126-16



Part 16: Hardware for Lift and Slide windows;

German and English version prEN 13126-16:2018

62

323 DIN EN 13126-17



Part 17: Hardware for Tilt and Slide windows;


65

324 DIN EN 13138-1

Buoyant aids for swimming instruction - Part 1:

Safety requirements and test methods for buoyant

aids to be worn; German and English version prEN

13138-1:2018

84

325 DIN EN 13203-5

Gas-fired domestic appliance producing hot water -

Part 5: Assessment of energy consumption of gas

fired appliances combined with electrical heat pump;


108

Xây dựng dân dụng Trở về đầu trang

326

ASTM E950/E950M-


E950-98(2004)

Standard Test Method for Measuring the

Longitudinal Profile of Traveled Surfaces with an

Accelerometer-Established Inertial Profiling

Reference

6

327

ASTM E1927-98(2018)

Replaces: ASTM E1927-

98(2007)

Standard Guide for Conducting Subjective Pavement

Ride Quality Ratings 8

328 DIN EN 12697-13

Bituminous mixtures - Test methods - Part 13:

Temperature measurement; German version EN

12697-13:2017

9

329 DIN EN 12697-53


Cohesion increase by spreadability-meter method;


25

330 DIN EN 12697-54 Bituminous mixtures - Test methods - Part 54:

Curing of specimen for test of mixtures with bitumen

emulsion; German and English version prEN 12697-

24


54:2018

331 DIN EN 12697-55


Organoleptic assessment of compatibility of

constituent materials of a mixture with bitumen

emulsion; German and English version prEN 12697-

55:2018

21

332 DIN EN 12697-56


Specimen preparation by static compaction; German

and English version prEN 12697-56:2018

20

333 DIN EN 13108-31

Bituminous mixtures - Material specifications - Part

31: Asphalt Concrete with Bituminous Emulsion;


85

Thiết bị gia dụng và thương mại giải trí. Thể thao Trở về đầu trang

334 ISO 19448:2018

Dentistry — Analysis of fluoride concentration in

aqueous solutions by use of fluoride ion-selective

electrode

11

335 ISO 23537-1:2016/

Amd.1:2018

Requirements for sleeping bags — Part 1: Thermal

and dimensional requirements AMENDMENT 1 1


ASTM F406-13

Standard Consumer Safety Specification for Non-

Full-Size Baby Cribs/Play Yards 43


ASTM F2376-17

Standard Practice for Classification, Design,

Manufacture, Construction, and Operation of Water

Slide Systems

10

338 BS EN ISO 20957-10:2017

Replaces; BS EN 957-10:2005

Stationary training equipment. Exercise bicycles with

a fixed wheel or without freewheel. Additional

specific safety requirements and test methods

18

339 DIN 15901 Entertainment technology - Two-pin connectors for

stage lighting 18

340 DIN 79161-1/A1 Playground inspection - Qualification of playground

inspectors - Part 1: Training and education 6

341 DIN 79161-2/A1

Playground inspection - Qualification of playground

inspectors - Part 2: Examination and verification of

qualification

4

Để có toàn văn các tiêu chuẩn trên hoặc các tiêu chuẩn khác, vui lòng liên hệ:

Quầy dịch vụ tham khảo – Thư viện Trường ĐH Công nghiệp TP. HCM

12 Nguyễn Văn Bảo, Phường 4, Quận Gò Vấp, TP. HCM

Email: [email protected]

Điện thoại: 083.8940 390 – 131.

TIÊU CHUẨN MỚI SỐ 01&02/2018 - lib.iuh.edu.vnlib.iuh.edu.vn/wp-content/uploads/2018/03/Bantin_Tieuchuan_0102-2018.pdf · Thiết bị điện gia dụng và thiết bị điện

Documents