DESCRIPTION The SOLBERG ® Swing Check Valve has a stainless steel disc for the internal movable part, which is on a hinge to block reverse flow. Swing Check Valves are available for use with most bladder tank foam systems. All valves are of stainless steel construction and have NPT connections with a maximum working pressure of 200 psi (14 bar). The Swing Check Valve prevents foam-water solution from draining through the existing fire sprinkler riser from a remote location, eliminating the need for personnel to go near or access concentrate piping and the foam tank assembly. ORDERING INFORMATION SWING CHECK VALVE SOLBERG ® FOAM SYSTEM ACCESSORY VALVES FEATURES • Metal-to-metal seal • Stainless steel body • Female threaded end connections SWING CHECK VALVE FACE TO FACE VALVE LENGTH APPROXIMATE SHIPPING WEIGHT PART NO. DESCRIPTION in mm lb kg 30400 Swing Check Valve, Stainless Steel, 1.0” NPT 3.54 89.91 1 0.5 30401 Swing Check Valve, Stainless Steel, 1.25” NPT 4.13 104.90 2 1 30402 Swing Check Valve, Stainless Steel, 1.5” NPT 4.72 119.88 3 1.5 30403 Swing Check Valve, Stainless Steel, 2.0” NPT 5.51 139.95 5 2 30404 Swing Check Valve, Stainless Steel, 2.5” NPT 6.08 154.43 9 4 30405 Swing Check Valve, Stainless Steel, 3.0” NPT 7.29 185.16 12 5
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
DESCRIPTIONThe SOLBERG® Swing Check Valve has a stainless steel disc for the internal movable part, which is on a hinge to block reverse fl ow. Swing Check Valves are available for use with most bladder tank foam systems. All valves are of stainless steel construction and have NPT connections with a maximum working pressure of 200 psi (14 bar). The Swing Check Valve prevents foam-water solution from draining through the existing fi re sprinkler riser from a remote location, eliminating the need for personnel to go near or access concentrate piping and the foam tank assembly.
ORDERING INFORMATION
SWING CHECK VALVE
SOLBERG® FOAM SYSTEM ACCESSORY VALVES
FEATURES
• Metal-to-metal seal• Stainless steel body• Female threaded end
connections
SWING CHECK VALVE FACE TO FACE VALVE LENGTH APPROXIMATE SHIPPING WEIGHT
DESCRIPTION Solberg offers Water Inlet and Concentrate Isolation Control Ball Valves for use with SOLBERG foam systems hardware. Both style valves are of stainless steel construction, RTFE seats, PTFE seals and NPT threaded connections. Water Inlet and Concentrate Isolation Control Ball Valves are supplied with nameplate, ring pin and chain to allow the valve to be visually monitored in an open or closed position.
ORDERING INFORMATION
WATER INLET & CONCENTRATE ISOLATION BALL VALVES
FEATURES
• Works with all SOLBERG foam concentrates
• Corrosion resistant material construction
• Easily identifiable open and closed positions
WATER INLET & CONCENTRATE ISOLATION BALL VALVES
FACE TO FACE VALVE LENGTH APPROXIMATE SHIPPING WEIGHT
DESCRIPTION The SOLBERG® mini Pressure Reducing Valve (PRV) is designed to reduce incoming water pressure to a sensible level to protect foam system components. The PRV is constructed with a brass body, stainless steel stem and spring, Buna-N seats and diaphragm. The maximum working pressure is 300 psi (21 bar) with a temperature range of 33°F - 140°F (0.5°C - 60°C). The PRV is placed in the sensing line between the hydraulic concentrate ball valve and the sprinkler actuating valve (alarm check, deluge, etc.) when the system water pressure will meet or exceed 160 psi (11 bar).
TYPICAL PIPING ISOMETRIC
PRESSURE REDUCING VALVE
FEATURES
• Rugged brass body• Stainless steel stem and spring• Oversized orifice• Standard 0.125 in (3mm) gauge
NOTICE PERIMETER SOLUTIONS MAKES NO REPRESENTATIONS OR WARRANTIES AS TO THE COMPLETENESS OR ACCURACY OF THE INFORMATION INCLUDED HEREIN. THE INFORMATION CONTAINED HEREIN IS NOT INTENDED TO PROVIDE REGULATORY, LEGAL OR EXPERT ADVICE RELATING TO THE PRODUCTS, ITS APPLICATION OR USES. NOTHING CONTAINED HEREIN IS TO BE CONSTRUED AS A RECOMMENDATION TO USE ANY PRODUCT, PROCESS, EQUIPMENT OR FORMULATION IN CONFLICT WITH ANY INDUSTRIAL PROPERTY OR INTELLECTUAL PROPERTY RIGHTS, AND PERIMETER SOLUTIONS MAKES NO REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED, THAT THE USE THEREOF WILL NOT INFRINGE ON ANY INDUSTRIAL PROPERTY OR INTELLECTUAL PROPERTY RIGHTS. NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESSED OR IMPLIED, OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR OF ANY OTHER NATURE ARE MADE HEREUNDER WITH RESPECT TO THE INFORMATION CONTAINED HEREIN.
perimeter-solutions.com
F-2013002-3
SOLBERG® FOAM SYSTEM ACCESSORY VALVES
EMEA Polígono de Baiña, Parcela 23 33682 Mieres (Asturias) Spain