This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
FISCHER HOLLOW CEILING ANCHORS, FISCHER M ANCHORS, NAIL IN ANCHORS, INSULATION FIXINGS
RAWL BOLTS
RAWLSHIELDS, HOOK & EYE RAWLBOLTS
RAWL THROUGHBOLTS
SLEEVE ANCHORS
CHEMICAL ANCHORS
CAVITY FIXINGS - SPRING TOGGLES, SNAP TOGGLES, METAL ANCHORS, RAWLNUTS
CAVITY FIXINGS - FISCHER UX-R, POLYTOGGLE, FISCHER TYPE PD, METAL DRIVA, SPIT DRIVA PLUS,QWIKMASTER FIXINGS
PRODUCT MF COLOUR PLUG DRILL TO SUIT BOX/CTN PRICE CODE CODE LENGTH SIZE GAUGE QTY PER 1000
PRODUCT MF COLOUR PLUG DRILL TO SUIT BOX/CTN PRICE CODE CODE LENGTH SIZE GAUGE QTY PER 100
PRODUCT MF DESCRIPTION BOX PRICE CODE CODE QTY PER 100
MF PLASTIC PLUGS
• For use in very soft blocks for a secure fixing using woodscrews
GB 8 0113208 - 50mm 8.0mm 10g 25 91.73
GB 10 0113210 - 55 10.0 14 20 107.54
GB 14 0113214 - 75 14.0 10mm 10 176.72
FISCHER TWISTLOCK ANCHORS
• High quality double expansion plug - suitable for most solid substrates• Screws should be long enough to protrude 3-10mm out of the end of the plug
TP 0 0105055 WHITE 20mm 5.5mm 6-10g 100/1000 37.65
TP 1 0105155 YELLOW 25 5.5 6-10 100/1000 40.05
TP 2 0105255 RED 35 5.5 6-10 100/1000 44.55
TP 2B 0105280 BROWN 40 8.0 10-14 100/1000 71.06
TP 3 0105305 BLUE 50 10.0 10-18 100/1000 145.21
TP 4 0105206 GREEN 60 12.0 6-10mm 100/500 276.64
THORSMAN PLASTIC PLUGS
• Top quality plug suitable for all sorts of substrate, especially soft materials• Screws should protrude 3-10mm out of the end of the plug for the best result
N 5 0109005 - 25mm 5.0mm 4-8 100/10000 2.80
N 6 0109006 - 30 6.0 6-10 100/10000 4.50
N 7 0109007 - 30 7.0 8-12 100/10000 4.75
N 8 0109008 - 40 8.0 10-14 100/10000 6.30
N 10 0109010 - 50 10.0 14-18 50/1000 12.65
N 12 0109012 - 60 12.0 8-10mm 25/500 18.95
N 14 0109014 - 75 14.0 10-12 20/500 36.65
NYLON PLUGS
• For heavier fixing requirements• Product is sold complete with washers
FS 8 x 70 0117435 M8 x 70 Coachscrew/ N10 Plug 25 50.25
FS 10 x 70 0117535 M10 x 70 Coachscrew/ N12 Plug 25 60.80
• Economy two way expansion plugs suitable for brick, masonry and concrete• Screws should protrude out of the end of the plug by 3-10mm
MF 1 0101150 YELLOW 22mm 5.0mm 6 - 10g 100/1000
MF 2 0101255 RED 34 5.5 6 - 10 100/1000
MF 3 0101370 BROWN 40 7.0 10 - 14 100/1000
PRODUCT MF COLOUR PLUG DRILL TO SUIT BOX/CTN PRICE CODE CODE LENGTH SIZE GAUGE QTY PER 1000
PRODUCT MF COLOUR PLUG DRILL TO SUIT BOX/CTN PRICE CODE CODE LENGTH SIZE GAUGE QTY PER 100
PRODUCT MF DESCRIPTION BOX PRICE CODE CODE QTY PER 100
MF PLASTIC PLUGS
• For use in very soft blocks for a secure fixing using woodscrews
GB 8 0113208 - 50mm 8.0mm 10g 25
GB 10 0113210 - 55 10.0 14 20
GB 14 0113214 - 75 14.0 10mm 10
FISCHER TWISTLOCK ANCHORS
• High quality double expansion plug - suitable for most solid substrates• Screws should be long enough to protrude 3-10mm out of the end of the plug
TP 0 0105055 WHITE 20mm 5.5mm 6-10g 100/1000
TP 1 0105155 YELLOW 25 5.5 6-10 100/1000 40.05
TP 2 0105255 RED 35 5.5 6-10 100/1000
TP 2B 0105280 BROWN 40 8.0 10-14 100/1000
TP 3 0105305 BLUE 50 10.0 10-18 100/1000 145.21
TP 4 0105206 GREEN 60 12.0 6-10mm 100/500 276.64
THORSMAN PLASTIC PLUGS
• Top quality plug suitable for all sorts of substrate, especially soft materials• Screws should protrude 3-10mm out of the end of the plug for the best result
N 5 0109005 - 25mm 5.0mm 4-8 100/10000
N 6 0109006 - 30 6.0 6-10 100/10000
N 7 0109007 - 30 7.0 8-12 100/10000
N 8 0109008 - 40 8.0 10-14 100/10000
N 10 0109010 - 50 10.0 14-18 50/1000
N 12 0109012 - 60 12.0 8-10mm 25/500
N 14 0109014 - 75 14.0 10-12 20/500
NYLON PLUGS
• For heavier fixing requirements• Product is sold complete with washers
FS 8 x 70 0117435 M8 x 70 Coachscrew/ N10 Plug 25 50.25
FS 10 x 70 0117535 M10 x 70 Coachscrew/ N12 Plug 25
UPVC FRAME FIXINGS For direct mounting of PVCu window frames to brickwork and masonry. Fixing clips into frame section to prevent distortion of frame when tightening.
LFHF - Large flanged hammerfix ideal for fixing builders metalwork to masonry.
*Stainless Steel nail version
For fast through fixing of battens, skirtings, wall plate straps etc. The drive screw is simply hammered in. Can be removed with screwdriver but frame fixings are recommended where adjustment is needed after installation
FF 8/60Z 0121430 8mm 70mm 10mm 100 18.75
FF 8/80Z 0121440 8mm 90mm 30mm 50 20.80
FF 8/100Z 0121450 8mm 110mm 60mm 50 25.95
FF 8/120Z 0121454 8mm 130mm 80mm 50 30.75
FF 8/135Z 0121457 8mm 145mm 95mm 50 37.80
FF 8/160Z 0121462 8mm 170mm 120mm 50 69.35
FF 10/80Z 0121540 10mm 90mm 30mm 50 32.60
FF 10/100Z 0121550 10mm 110mm 50mm 25 37.00
FF 10/120Z 0121554 10mm 125mm 65mm 25 40.20
FF 10/140Z 0121558 10mm 145mm 85mm 25 49.50
FF 10/160Z 0121562 10mm 170mm 110mm 25 61.80
FF 10/200Z 0121570 10mm 210mm 150mm 25 90.80
FF 10/240Z 0121574 10mm 250mm 190mm 25 129.20
PRODUCT MF DRILL MIN. HOLE MAX. BOX PRICES CODE CODE SIZE DEPTH FIXING QTY. PER 100
For through fixing of battens, window and door frames, skirting etc. to most common substrates.
UPVC FRAME FIXINGS For direct mounting of PVCu window frames to brickwork and masonry. Fixing clips into frame section to prevent distortion of frame when tightening.
LFHF - Large flanged hammerfix ideal for fixing builders metalwork to masonry.
*Stainless Steel nail version
For fast through fixing of battens, skirtings, wall plate straps etc. The drive screw is simply hammered in. Can be removed with screwdriver but frame fixings are recommended where adjustment is needed after installation
FF 8/60Z 0121430 8mm 70mm 10mm 100
FF 8/80Z 0121440 8mm 90mm 30mm 50
FF 8/100Z 0121450 8mm 110mm 60mm 50
FF 8/120Z 0121454 8mm 130mm 80mm 50
FF 8/135Z 0121457 8mm 145mm 95mm 50
FF 8/160Z 0121462 8mm 170mm 120mm 50
FF 10/80Z 0121540 10mm 90mm 30mm 50
FF 10/100Z 0121550 10mm 110mm 50mm 25
FF 10/120Z 0121554 10mm 125mm 65mm 25
FF 10/140Z 0121558 10mm 145mm 85mm 25
FF 10/160Z 0121562 10mm 170mm 110mm 25
FF 10/200Z 0121570 10mm 210mm 150mm 25
FF 10/240Z 0121574 10mm 250mm 190mm 25
PRODUCT MF DRILL MIN. HOLE MAX. BOX PRICES CODE CODE SIZE DEPTH FIXING QTY. PER 100
For through fixing of battens, window and door frames, skirting etc. to most common substrates.
• Revolutionary design for high performance in all substrates• Especially ideal for soft blocks, perforated materials, no-fines concrete, etc. • Torx drive for positive driving
FISCHER TYPE FUR-T
FUR 8x80T 0139440 8mm 90mm 10mm 50 83.97
FUR 8x100T 0139450 8mm 110mm 30mm 50 96.32
FUR 8x120T 0139454 8mm 130mm 50mm 50 108.66
FUR 10x100T 0139550 10mm 110mm 30mm 50 113.60
FUR 10x115T 0139553 10mm 125mm 45mm 50 129.65
FUR 10x135T 0139557 10mm 145mm 65mm 50 156.82
FUR 10x160T 0139562 10mm 170mm 90mm 50 200.04
FUR 10x185T 0139567 10mm 195mm 115mm 50 277.83
FUR 10x200T 0139570 10mm 210mm 130mm 50 364.27
FUR 10x230T 0139573 10mm 240mm 160mm 50 456.88
PRODUCT MF DRILL MIN. HOLE MAX. BOX PRICES CODE CODE SIZE DEPTH FIXING QTY. PER 100
FUR 8x80SS 0140440 8mm 90mm 10mm 50 86.44
FUR 8x100SS 0140450 8mm 110mm 30mm 50 99.40
FUR 10x80SS 0140540 10mm 90mm 10mm 50 103.11
FUR 10x100SS 0140550 10mm 110mm 30mm 50 117.31Other sizes available to order
Same as above fixing but with hexagon head screw. FISCHER TYPE FUR-SS
SXR 8x80Z 0141440 8mm 90mm 30mm 50 42.38
SXR 8x100Z 0141450 8mm 110mm 50mm 50 54.29
SXR 8x120Z 0141454 8mm 130mm 70mm 50 63.29
SXR 10x100Z 0141550 10mm 110mm 50mm 50 90.38
SXR 10x120Z 0141554 10mm 130mm 70mm 50 103.11
SXR 10x140Z 0141558 10mm 150mm 90mm 50 115.95
SXR 10x160Z 0141562 10mm 170mm 110mm 50 156.33
SXR 10x180Z 0141566 10mm 190mm 130mm 50 220.91
SXR 10x200T 0141570 10mm 210mm 150mm 50 289.68
SXR 10x230T 0141573 10mm 240mm 180mm 50 363.41
SXR 10x260T 0141576 10mm 270mm 210mm 50 459.98
• High performance, high load, genuine all-round fixing• European Technical Approval covering 41 different building materials• Performs in solid, perforated and soft materials
FISCHER TYPE SXR-T
1 / 3GENERAL FIXINGS
SXR 10x60FUS 0142530 10mm 70mm 10mm 50 79.02
SXR 10x80FUS 0142540 10mm 90mm 30mm 50 87.06
SXR 10x100FUS 0142550 10mm 110mm 50mm 50 99.28
SXR 10x120FUS 0142554 10mm 130mm 70mm 50 116.56
SXR 10x140FUS 0142558 10mm 150mm 90mm 50 137.12
SXR 10x160FUS 0142562 10mm 170mm 110mm 50 172.26
Same as above fixing but with hexagon head screw. FISCHER TYPE SXR-FUS
• Revolutionary design for high performance in all substrates• Especially ideal for soft blocks, perforated materials, no-fines concrete, etc. • Torx drive for positive driving
FISCHER TYPE FUR-T
FUR 8x80T 0139440 8mm 90mm 10mm 50
FUR 8x100T 0139450 8mm 110mm 30mm 50
FUR 8x120T 0139454 8mm 130mm 50mm 50
FUR 10x100T 0139550 10mm 110mm 30mm 50
FUR 10x115T 0139553 10mm 125mm 45mm 50
FUR 10x135T 0139557 10mm 145mm 65mm 50
FUR 10x160T 0139562 10mm 170mm 90mm 50
FUR 10x185T 0139567 10mm 195mm 115mm 50 277.83
FUR 10x200T 0139570 10mm 210mm 130mm 50 364.27
FUR 10x230T 0139573 10mm 240mm 160mm 50
PRODUCT MF DRILL MIN. HOLE MAX. BOX PRICES CODE CODE SIZE DEPTH FIXING QTY. PER 100
FUR 8x80SS 0140440 8mm 90mm 10mm 50
FUR 8x100SS 0140450 8mm 110mm 30mm 50
FUR 10x80SS 0140540 10mm 90mm 10mm 50
FUR 10x100SS 0140550 10mm 110mm 30mm 50 Other sizes available to order
Same as above fixing but with hexagon head screw. FISCHER TYPE FUR-SS
SXR 8x80Z 0141440 8mm 90mm 30mm 50
SXR 8x100Z 0141450 8mm 110mm 50mm 50
SXR 8x120Z 0141454 8mm 130mm 70mm 50
SXR 10x100Z 0141550 10mm 110mm 50mm 50
SXR 10x120Z 0141554 10mm 130mm 70mm 50
SXR 10x140Z 0141558 10mm 150mm 90mm 50
SXR 10x160Z 0141562 10mm 170mm 110mm 50
SXR 10x180Z 0141566 10mm 190mm 130mm 50 220.91
SXR 10x200T 0141570 10mm 210mm 150mm 50 289.68
SXR 10x230T 0141573 10mm 240mm 180mm 50 363.41
SXR 10x260T 0141576 10mm 270mm 210mm 50 459.98
• High performance, high load, genuine all-round fixing• European Technical Approval covering 41 different building materials• Performs in solid, perforated and soft materials
FISCHER TYPE SXR-T
1 / 31 / 3GENERAL FIXINGS
SXR 10x60FUS 0142530 10mm 70mm 10mm 50
SXR 10x80FUS 0142540 10mm 90mm 30mm 50
SXR 10x100FUS 0142550 10mm 110mm 50mm 50
SXR 10x120FUS 0142554 10mm 130mm 70mm 50
SXR 10x140FUS 0142558 10mm 150mm 90mm 50
SXR 10x160FUS 0142562 10mm 170mm 110mm 50
Same as above fixing but with hexagon head screw. FISCHER TYPE SXR-FUS
• Internally threaded anchor for use in concrete• Expanded by hammer and setting tool • Accepts bolts, threaded bar etc.
• Zykon is a high performance, stress free, internally threaded anchor for concrete• An undercut hole is drilled using the Zykon drill and the anchor is set into the undercut• Gives very high permissible loads in all areas of the concrete
• For drilling undercut hole
FISCHER ZYKON HAMMERSET
FZEA10 0205010 M 8 40mm N/A FZUB 10 x 40 100 69.82
FZEA12 0205012 M 10 40mm N/A FZUB 12 x 40 100 88.38
FZEA14 0205014 M 12 40mm N/A FZUB 14 x 40 50 135.96
• Internally threaded anchor for use in concrete• Expanded by hammer and setting tool • Accepts bolts, threaded bar etc.
• Zykon is a high performance, stress free, internally threaded anchor for concrete• An undercut hole is drilled using the Zykon drill and the anchor is set into the undercut• Gives very high permissible loads in all areas of the concrete
• For drilling undercut hole
FISCHER ZYKON HAMMERSET
FZEA10 0205010 M 8 40mm N/A FZUB 10 x 40 100
FZEA12 0205012 M 10 40mm N/A FZUB 12 x 40 100
FZEA14 0205014 M 12 40mm N/A FZUB 14 x 40 50 135.96
HOLLOW CEILING ANCHORS – FHY • Specially developed for fixing to concrete hollow ceiling slabs• High expansion capacity- performs in solid and hollow materials• Female thread for accepting bolts, threaded bar etc.
• High performance nylon anchor with female thread• Performs well in poor masonry, hollow pots, lightweight blocks etc.• Corrosion proof anchor
• Zinc alloy fixing for quick installation by hammering• Ideal for installing drywall systems, suspended ceilings etc.
• One piece nylon fixing for fastening rigid insulation to masonry• Hole is drilled straight through the insulation and fixing is hammered in
HEAVY DUTY NYLON ANCHORS TYPE ‘M’
NAIL IN ANCHORS
NA 6x 40 0144320 6mm 40mm 15mm 100 19.60
NYLON INSULATION FIXINGS
NIN 70 0148070 8mm 70mm 30-40mm 32mm 500 11.35
NIN 90 0148090 8mm 90mm 50-60mm 32mm 500 12.40
NIN 110 0148110 8mm 110mm 70-80mm 32mm 500 14.70
PRODUCT MF DRILL LENGTH INSULATION HEAD BOX PRICES CODE CODE SIZE THICKNESS DIA. QTY. PER 100
M6 0201006 12mm 50mm 40mm 50 103.32
M8 0201008 16mm 65mm 50mm 20 188.94
M10 0201010 20mm 80mm 60mm 10 327.74
M12 0201012 24mm 90mm 70mm 5 509.86
PRODUCT MF DRILL MIN. HOLE MAX. BOLT BOX PRICE CODE CODE SIZE DEPTH LENGTH QTY. PER 100
HOLLOW CEILING ANCHORS – FHY • Specially developed for fixing to concrete hollow ceiling slabs• High expansion capacity- performs in solid and hollow materials• Female thread for accepting bolts, threaded bar etc.
• High performance nylon anchor with female thread• Performs well in poor masonry, hollow pots, lightweight blocks etc.• Corrosion proof anchor
• Zinc alloy fixing for quick installation by hammering• Ideal for installing drywall systems, suspended ceilings etc.
• One piece nylon fixing for fastening rigid insulation to masonry• Hole is drilled straight through the insulation and fixing is hammered in
HEAVY DUTY NYLON ANCHORS TYPE ‘M’
NAIL IN ANCHORS
NA 6x 40 0144320 6mm 40mm 15mm 100
NYLON INSULATION FIXINGS
NIN 70 0148070 8mm 70mm 30-40mm 32mm 500 11.35
NIN 90 0148090 8mm 90mm 50-60mm 32mm 500 12.40
NIN 110 0148110 8mm 110mm 70-80mm 32mm 500 14.70
PRODUCT MF DRILL LENGTH INSULATION HEAD BOX PRICES CODE CODE SIZE THICKNESS DIA. QTY. PER 100
M6 0201006 12mm 50mm 40mm 50 103.32
M8 0201008 16mm 65mm 50mm 20
M10 0201010 20mm 80mm 60mm 10
M12 0201012 24mm 90mm 70mm 5
PRODUCT MF DRILL MIN. HOLE MAX. BOLT BOX PRICE CODE CODE SIZE DEPTH LENGTH QTY. PER 100
* Limited Embedment These have lower working loads.Technical details available on request.
Rawl Safety Plus are high performance through fixings for concrete, providing maximum reliability in safety critical applications, even when concrete is cracked.
PRODUCTCODE
MFCODE
DRILLDIA.
TOTALLENGTH
MIN. HOLEDEPTH
MAX. FIX.THICKNESS
BOXQTY
PRICEPER 100
SPM 815 P 0226315 12mm 95mm 80mm 15mm 50 387.50 SPM 1020 P 0226420 15mm 110mm 90mm 20mm 50 393.75 SPM 1225 P 0226525 18mm 135mm 105mm 25mm 25 575.80 SPM 1250 P 0226550 160mm 50mm 25 812.50 SPM 1625 P 0226625 24mm 160mm 125mm 25mm 10 1293.75 SPM 2030 P 0226730 28mm 190mm 155mm 30mm 10 2106.25
* Limited Embedment These have lower working loads.Technical details available on request.
Rawl Safety Plus are high performance through fixings for concrete, providing maximum reliability in safety critical applications, even when concrete is cracked.
PRODUCTCODE
MFCODE
DRILLDIA.
TOTALLENGTH
MIN. HOLEDEPTH
MAX. FIX.THICKNESS
BOXQTY
SPM 815 P 0226315 12mm 95mm 80mm 15mm 50 387.50 SPM 1020 P 0226420 15mm 110mm 90mm 20mm 50 393.75 SPM 1225 P 0226525 18mm 135mm 105mm 25mm 25 575.80 SPM 1250 P 0226550 160mm 50mm 25 812.50 SPM 1625 P 0226625 24mm 160mm 125mm 25mm 10 1293.75 SPM 2030 P 0226730 28mm 190mm 155mm 30mm 10 2106.25
* First half of code = Thread Diameter Second half = Fixing Thickness
The original heavy duty expansion fixing for brickwork, stone, masonry and concrete. Shield Anchors have a higher degree of expansion than other types of anchors offering excellent tolerance to variations in hole size. Combines ease of installation with good load carrying capacity.
* First half of code = Thread Diameter Second half = Fixing Thickness
The original heavy duty expansion fixing for brickwork, stone, masonry and concrete. Shield Anchors have a higher degree of expansion than other types of anchors offering excellent tolerance to variations in hole size. Combines ease of installation with good load carrying capacity.
* Minimum recommended hole depth in concrete of 25N/mm2 strength.
In weaker concrete embedment should be deeper.
Throughbolts should not be used in brickwork or aggregate blocks.
These short Throughbolts have reduced embedment depths. Load and torque figures should be reduced accordingly; tighten to 5 full turns from finger tight.
We do not recommend short Throughbolts to be used as structural load fixings.
Throughbolt is a versatile, cost effective anchor, combining ease of installation with good load carrying characteristics. It requires a hole the same diameter as the bolt and so is ideal for through fixing. For use in concrete with minimum strength of 20N/mm2 .
* Minimum recommended hole depth in concrete of 25N/mm2 strength.
In weaker concrete embedment should be deeper.
Throughbolts should not be used in brickwork or aggregate blocks.
These short Throughbolts have reduced embedment depths. Load and torque figures should be reduced accordingly; tighten to 5 full turns from finger tight.
We do not recommend short Throughbolts to be used as structural load fixings.
Throughbolt is a versatile, cost effective anchor, combining ease of installation with good load carrying characteristics. It requires a hole the same diameter as the bolt and so is ideal for through fixing. For use in concrete with minimum strength of 20N/mm2 .
TEL: (0115) 922 1585
WIREHANGERS Simple effective fixing for wire suspension from concrete ceilings
M 6 0251006 - hole: 6mm x 40mm Boxed in 100’s 19.20
• Light duty all metal anchor for general fixing into brickwork, concrete and blockwork of above 7N/mm2 strength. FOR STAINLESS STEEL SEE THE MF STAINLESS CATALOGUE
• Light duty all metal anchor for general fixing into brickwork, concrete and blockwork of above 7N/mm2 strength. FOR STAINLESS STEEL SEE THE MF STAINLESS CATALOGUE
• For use with stud or rebar. Set by simply hammering through the capsule.• Allows for use of standard studding cut to length.
02670265 0269
Including nut and washer
• All studs have hexagonal drive head and come complete with simple setting tool for driving into CM capsules.• Can be used with cartridge resin.
• The capsule is broken and mixed in the hole by the action of driving the stud in with a drilling machine.
• High performance resin bonded anchor system for use in a variety of solid substrates. These anchors do not expand and therefore provide an expansion stress free fixing.
PRICE PER 100
M6 x 24 0270212 75 M10 10 90.45 306.30
M8 x 25 0270316 90 M12 10 96.55 298.10
M10 x 40 0270420 100 M16 10 185.40 515.50
M12 x 48 0270524 100 M16 6 207.00 796.00
M16 x 64 0270632 125 M24 6 398.00 1789.70
INTERNAL THREADED SOCKETS
THREAD SIZE MF SOCKET CAPSULE BOX PRICE PER 100DIA x LGTH MM CODE LENGTH SIZE QUANTITY M/STEEL S/STEEL A2
• Internally threaded sockets for use with capsules.
• For use with stud or rebar. Set by simply hammering through the capsule.• Allows for use of standard studding cut to length.
02670265 0269
Including nut and washer
• All studs have hexagonal drive head and come complete with simple setting tool for driving into CM capsules.• Can be used with cartridge resin.
• The capsule is broken and mixed in the hole by the action of driving the stud in with a drilling machine.
• High performance resin bonded anchor system for use in a variety of solid substrates. These anchors do not expand and therefore provide an expansion stress free fixing.
PRICE PER 100
M6 x 24 0270212 75 M10 10
M8 x 25 0270316 90 M12 10
M10 x 40
M12 x 48
M16 x 64
0270212 75 M10 10
0270316 90 M12 10
0270420 100 M16 10
0270524 100 M16 6
0270632 125 M24 6 398.00
INTERNAL THREADED SOCKETS
THREAD SIZE MF SOCKET CAPSULE BOX PRICE PER 100DIA x LGTH MM CODE LENGTH SIZE QUANTITY M/STEEL S/STEEL A2
• Internally threaded sockets for use with capsules.
• Injection Resins are ideal for stress free fixing into a very wide range of substrates. This includes fixing into perforated materials, in conjunction with mesh sleeves, and aircrete blocks in conjunction with Cone Drills. These quality mix-in-the-nozzle resins are versatile, straight-forward and safe to use.
SPARE MIXER NOZZLES
POLYESTER RESINS
PRODUCT MF DESCRIPTION SUITABLE FOR PRICE CODE CODE EACH SMN 0276210 Spare Mixer Nozzles Universal for all Standard Resins 1.50
FIS SE 0276230 Spare Mixer Nozzles FIS EM 390S Only 4.35
FIS EN 0276290 1m Extension Nozzles Extensions for all Nozzles 5.61
FIS AM 0276020 Resin Cartridge Gun FIS V 360S 30.80
FIS AK 0276030 Resin Cartridge Gun FIS V 360S / FIS EM 390S 90.00
RESIN SITE BOXES PRODUCT MF CONTENTS PRICE CODE CODE EACH FIPC - SB 0276115 Site Box, FIP Gun, Brush Set, Dust Pump, 5 Nozzles 92.50
FISV - SB 0276125 Site Box, FIS AM Gun, Brush Set, Dust Pump, 5 Nozzles 90.00
TEL: (0115) 922 1585
• Suitable for use in all masonry building materials• For use in concrete in non-critical applications
• High performance resins for use in concrete and all common building substrates• Give maximum loadings with maintained bond strength even in damp conditions• Hybrid versions have cement element for maximum performance and stability and are suitable alternative to HILTI HY150
• Epoxy resin is characterised by extremely high bond strength and excellent adhesion• Especially suited for smooth, diamond drilled holes and shallow embedment depths• Can be used in damp conditions and even under water
• Injection Resins are ideal for stress free fixing into a very wide range of substrates. This includes fixing into perforated materials, in conjunction with mesh sleeves, and aircrete blocks in conjunction with Cone Drills. These quality mix-in-the-nozzle resins are versatile, straight-forward and safe to use.
SPARE MIXER NOZZLES
POLYESTER RESINS
PRODUCT MF DESCRIPTION SUITABLE FOR PRICE CODE CODE EACH SMN 0276210 Spare Mixer Nozzles Universal for all Standard Resins
FIS SE 0276230 Spare Mixer Nozzles FIS EM 390S Only
FIS EN 0276290 1m Extension Nozzles Extensions for all Nozzles
RESIN SITE BOXES PRODUCT MF CONTENTS PRICE CODE CODE EACH FIPC - SB 0276115 Site Box, FIP Gun, Brush Set, Dust Pump, 5 Nozzles
FISV - SB 0276125 Site Box, FIS AM Gun, Brush Set, Dust Pump, 5 Nozzles
TEL: (0115) 922 1585
• Suitable for use in all masonry building materials• For use in concrete in non-critical applications
• High performance resins for use in concrete and all common building substrates• Give maximum loadings with maintained bond strength even in damp conditions• Hybrid versions have cement element for maximum performance and stability and are suitable alternative to HILTI HY150
• Epoxy resin is characterised by extremely high bond strength and excellent adhesion• Especially suited for smooth, diamond drilled holes and shallow embedment depths• Can be used in damp conditions and even under water
Thorough hole cleaning is essential to successful resin fixing in solid materials. Recommended method is: blow out at least twice, brush out twice and blow out twice again. A badly cleaned hole means reduced load values.
AIRCRETE RESIN SYSTEM
PRODUCT MF DESCRIPTION PRICE CODE CODE PBB 0279300 Fischer Cone Drill 47.73 each
PBZ 0279400 Fischer Centring Sleeve 72.27 per 100
For optimum performance into lightweight blocks and other similar materials. Special cone drill cuts a conical undercut hole which is filled with resin. Plastic centring sleeve holds the anchor central while the resin hardens.
PUMP IN RESIN SOCKETS PRODUCT MF DESCRIPTION DRILL INTERNAL PRICE CODE CODE DIA. THREAD DEPTH PER 100 M8 x 80 0278342 Pump In Resin Sockets 14 35 141.10
M10 x 80 0278442 Pump In Resin Sockets 16 40 144.95
For resin fixing into perforated or hollow materials. The sleeve is inserted into the hole and filled with resin. The anchor is then pushed into the sleeve. In the case of Mesh Sleeves the resin is displaced through the mesh, with Net Sleeves the resin remains within the net and the complete net expands in the void.
Thorough hole cleaning is essential to successful resin fixing in solid materials. Recommended method is: blow out at least twice, brush out twice and blow out twice again. A badly cleaned hole means reduced load values.
For optimum performance into lightweight blocks and other similar materials. Special cone drill cuts a conical undercut hole which is filled with resin. Plastic centring sleeve holds the anchor central while the resin hardens.
PUMP IN RESIN SOCKETS PRODUCT MF DESCRIPTION DRILL INTERNAL PRICE CODE CODE DIA. THREAD DEPTH PER 100 M8 x 80 0278342 Pump In Resin Sockets 14 35
M10 x 80 0278442 Pump In Resin Sockets 16 40
For resin fixing into perforated or hollow materials. The sleeve is inserted into the hole and filled with resin. The anchor is then pushed into the sleeve. In the case of Mesh Sleeves the resin is displaced through the mesh, with Net Sleeves the resin remains within the net and the complete net expands in the void.
• Qwik Ankers are suitable for fixing into numerous different substrates• Benefits of a non-expanding anchor are positive and safe anchorage over full embedment length of fixing, high pull-out loadings and close-to-edge fixing ability• Anchors can be easily removed if necessory
• Self tapping masonry screw for time saving installation of all types of window and door frames• Benefits are small hole diameter, high load bearing and importantly no distortion of frame profile• Also ideal for timber batten fixing and other general uses• Supplied in boxes of 100 c/w Torx bit
FRAME SCREWS
M6 x 50 0287225 6 8 20 30mm 33.20
M6 x 75 0287237 6 8 45 30mm 46.20
M7.5 x 35 0286035 6 8 5 30mm 37.50
M8 x 60 0287330 8 10 20 40mm 48.70
M8 x 75 0287337 8 10 35 40mm 64.05
M8 x 100 0287350 8 10 60 40mm 81.20
M10 x 60 0287430 10 12 10 50mm 83.45
M10 x 75 0287437 10 12 25 50mm 80.85
M10 x 100 0287450 10 12 10 50mm 115.30
M10 x 130 0287456 10 12 80 50mm 140.65
M10 x 150 0287460 10 12 100 50mm 158.95
M12 x 75 0287537 12 14 15 60mm 120.00
M12 x 100 0287550 12 14 40 60mm 152.85
M12 x 150 0287560 12 14 90 60mm 263.65
M12 x 200 0287570 12 14 140 60mm 339.50
M16 x 100 0287650 16 20 20 80mm 432.60
M16 x 150 0287660 16 20 70 80mm 568.10
M16 x 200 0287670 16 20 120 80mm 727.10
M6 x 50 0285225 6 8 20 30mm 27.65
M6 x 75 0285237 6 8 45 30mm 38.50
M6 x 100 0285250 6 8 55 45mm 49.10
M6 x 130 0285256 6 8 85 45mm 61.60
SIZE
HEXAGON
COUNTERSUNK TORX DRIVE
MFCODE
DRILLSIZEmm
CLEARANCESIZEmm
MAX FIXINGTHICKNESS
mm
MINIMUM EMBEDMENTDEPTH
mm
PRICEPER100
7.5 X 50 0289050 6.0mm masonry / 6.5mm concrete 11.70
• Qwik Ankers are suitable for fixing into numerous different substrates• Benefits of a non-expanding anchor are positive and safe anchorage over full embedment length of fixing, high pull-out loadings and close-to-edge fixing ability• Anchors can be easily removed if necessory
• Self tapping masonry screw for time saving installation of all types of window and door frames• Benefits are small hole diameter, high load bearing and importantly no distortion of frame profile• Also ideal for timber batten fixing and other general uses• Supplied in boxes of 100 c/w Torx bit• Supplied in boxes of 100 c/w Torx bit
• Tapcon is the original self-tapping masonry anchor for fastening a wide range of components to concrete, brick and masonry materials• Advantages are - fast installation - expansion free close to edge fixing - high performance
- shallow embedment, 25mm in concrete• Available in two diameters - 5.0mm or 6.0mm• Available in Countersunk or Hexagon Head
3SH180 0295180 4.35 dia. for 5.0mm dia anchors 180 32, 45, 57, 70, 82,100 6.45
4SH180 0296180 5.15 dia. for 6.0mm dia anchors 180 32, 45, 57, 70, 82,100 6.45
4SH205 0296205 5.15 dia. for 6.0mm dia anchors 205 125 14.95
DRILLCODE
MFCODE
• All Tapcon drills are made to the close tolerances required to provide the best performance of the anchors
DIAMETER LENGTH MMTO SUIT ANCHOR
LENTHS (MM)PRICEEACH
SDS - TAPCON DRILLS
Drill pilot hole through fixture into concrete Snap on drive sleeve
Drive anchorJOB COMPLETE
INSTALLATION INSTRUCTIONS
TAPCON TOOLS AND ACCESSORIES
CONDRIVE 1000
P2P3
DRILL BIT
CD110
CD101
AK8
CD102 ASSYCD1022
SDS DRILL BIT
PRODUCT MF PRICE CODE CODE DESCRIPTION EACH
CD1000 0297100 Condrive Kit complete for installing all Tapcon Anchors (kit comprises * items below) 31.25
CD101* 0297101 Drill Bit Holder 7.89
CD102* 0297102 Standard Drive Sleeve 9.70
CD106* 0297106 1/4” Hex Socket (For type 5H Tapcon) 3.95
CD107* 0297107 5/16” Hex Socket (For type 6H Tapcon) 4.55
• Tapcon is the original self-tapping masonry anchor for fastening a wide range of components to concrete, brick and masonry materials• Advantages are - fast installation - expansion free close to edge fixing - high performance
- shallow embedment, 25mm in concrete• Available in two diameters - 5.0mm or 6.0mm• Available in Countersunk or Hexagon Head
3SH180 0295180 4.35 dia. for 5.0mm dia anchors 180 32, 45, 57, 70, 82,100 6.45
4SH180 0296180 5.15 dia. for 6.0mm dia anchors 180 32, 45, 57, 70, 82,100 6.45
4SH205 0296205 5.15 dia. for 6.0mm dia anchors 205 125 14.95
DRILLCODE
MFCODE
• All Tapcon drills are made to the close tolerances required to provide the best performance of the anchors
DIAMETER LENGTH MMTO SUIT ANCHOR
LENTHS (MM)
SDS - TAPCON DRILLS
Drill pilot hole through fixture into concrete Snap on drive sleeve
Drive anchorJOB COMPLETE
INSTALLATION INSTRUCTIONS
TAPCON TOOLS AND ACCESSORIES
CONDRIVE 1000CONDRIVE 1000
P2P2P3P3
DRILL BIT DRILL BIT
CD110
CD101
AK8
CD102 ASSYCD102 ASSYCD1022CD1022
SDS DRILL BITSDS DRILL BIT
PRODUCT MF PRICE CODE CODE DESCRIPTION EACH
CD1000 0297100 Condrive Kit complete for installing all Tapcon Anchors (kit comprises * items below)
CD101* 0297101 Drill Bit Holder
CD102* 0297102 Standard Drive Sleeve
CD106* 0297106 1/4” Hex Socket (For type 5H Tapcon)
CD107* 0297107 5/16” Hex Socket (For type 6H Tapcon)
• For hanging threaded rods from concrete ceilings including hollow floor slabs• Non expanding - can be fixed close to edge and at closer centres than other anchors• Install in less than half the time of drop-in anchors using smaller diameter drill bits
THREADED ROD HANGERS
PRODUCTCODE
PRODUCTCODE
MFCODE
MFCODE
THREADSIZE
DESCRIPTION
DRILLDIAMETER
ANCHORLENGTH
PRICEPER 100
PRICEEACH
• M8/M10 dual threaded for flexibility • For installation use drive socket MOP13 (see page 9/5)
FISCHER FBS 6 M8/M10i
FBS 6 M8/M10I 0294810 6.0/6.5 mm 55 mm 60 mm 67.20
• Short anchor length for shallow embedment• Good load capability e.g. QRH10 290kg Safe Load in B35 Concrete
QWIKIES
QRH 06 0293006 M6 6.5 mm 28 mm
QRH 08 0293008 M8 6.5 mm 38 mm
QRH 10 0293010 M10 6.5 mm 38 mm
QDS 12 0293112 Qwikie Drive Socket (for M8 & M10)
• For hanging threaded rods from concrete ceilings including hollow floor slabs• Non expanding - can be fixed close to edge and at closer centres than other anchors• Install in less than half the time of drop-in anchors using smaller diameter drill bits
THREADED ROD HANGERS
PRODUCTCODE
PRODUCTCODE
MFCODE
MFCODE
THREADSIZE
DESCRIPTION
DRILLDIAMETER
ANCHORLENGTH
• M8/M10 dual threaded for flexibility • For installation use drive socket MOP13 (see page 9/5)
METAL CAVITY FIXINGS High performance cavity fixing. Ideal for fixing radiators and heavy objects to plasterboard.
4100 0309410 8mm 0-2mm M4 20mm 50 36.25
4240 0309424 “ 6-14 M4 30 “ 36.60
5150 0309515 10 0-2 M5 20 “ 43.30
5250 0309525 “ 6-14 M5 30 “ 40.10
5400 0309540 “ 19-26 M5 50 “ 43.40
6150 0309615 13 0-2 M6 20 “ 50.55
6250 0309625 “ 3-13 M6 30 “ 59.75
6350 0309635 “ 13-23 M6 40 “ 60.70
8300 0309830 18 6-15 M8 40 “ 92.80
8500 0309850 “ 25-35 M8 60 “ 102.65
1055 0309955 20 25-35 M10 70 25 128.85
1275 0309975 24 33-45 M12 80 20 217.20
RAWLNUTS Problem solving fixing suitable for use in virtually any construction material, solid or hollow. Will fix into metal sheets, boards and also suitable for hollow pots, thin concrete slabs and tarmac.
M5 x 50 0301550 14mm 1-22mm M5 50mm 100 19.90
M6 x 75 0301675 18mm 1-45mm M6 60mm 50 27.10
For alternative screw lengths, see Machine Screws on page 7/12
PRODUCT MF DRILL BOARD SCREW MIN. BOX PRICE CODE CODE SIZE THICKNESS DIA. LGTH QTY. PER 100x
BM 5 0302005 13mm 9-90mm M5 25mm 50 65.70
BM 6 0302006 13mm 9-90mm M6 25mm 50 65.70
BM 8 0302008 19mm 9-90mm M8 25mm 25 115.50
SNAP TOGGLES • Vastly superior toggle fixing with high load - bearing capacity.• Much easier to install than spring toggles. Require smaller hole size and are self retained in wall - remain in place when
screw is removed.• Immense grip range - 9mm - 90mm
METAL CAVITY FIXINGS High performance cavity fixing. Ideal for fixing radiators and heavy objects to plasterboard.
4100 0309410 8mm 0-2mm M4 20mm 50
4240 0309424 “ 6-14 M4 30 “
5150 0309515 10 0-2 M5 20 “
5250 0309525 “ 6-14 M5 30 “
5400 0309540 “ 19-26 M5 50 “
6150 0309615 13 0-2 M6 20 “
6250 0309625 “ 3-13 M6 30 “
6350 0309635 “ 13-23 M6 40 “
8300 0309830 18 6-15 M8 40 “
8500 0309850 “ 25-35 M8 60 “
1055 0309955 20 25-35 M10 70 25
1275 0309975 24 33-45 M12 80 20
RAWLNUTS Problem solving fixing suitable for use in virtually any construction material, solid or hollow. Will fix into metal sheets, boards and also suitable for hollow pots, thin concrete slabs and tarmac.
M5 x 50 0301550 14mm 1-22mm M5 50mm 100
M6 x 75 0301675 18mm 1-45mm M6 60mm 50
For alternative screw lengths, see Machine Screws on page 7/12
PRODUCT MF DRILL BOARD SCREW MIN. BOX PRICE CODE CODE SIZE THICKNESS DIA. LGTH QTY. PER 100x PRODUCT MF DRILL BOARD SCREW MIN. BOX PRICEx PRODUCT MF DRILL BOARD SCREW MIN. BOX PRICE CODE CODE SIZE THICKNESS DIA. x CODE CODE SIZE THICKNESS DIA.
SNAP TOGGLES • Vastly superior toggle fixing with high load - bearing capacity.• Much easier to install than spring toggles. Require smaller hole size and are self retained in wall - remain in place when
screw is removed.• Immense grip range - 9mm - 90mm
SPIT DRIVA PLUS • Heavy duty plasterboard fixing which is installed in the same way as the Driva, but has the advantage of a toggle for more substantial loads
FISCHER TYPE PD
QWIKMASTER • Expansion plug for plasterboard of any thickness. Made from tough glass filled nylon. For use with 6-10g woodscrews. Use Pozi Screwdrivers to punch hole in board first then drive Qwikmaster home
METAL DRIVA • Self drilling plasterboard fixing. Installed with a No.2 pozidriver • Comes complete with a 35mm Pan Head Screw
• High load capacity cavity fixing which is fast and easy to install in plasterboard and other board materials• Extra short expansion zone means PD can be installed with only the smallest cavity behind the board• Accommodates double board thicknesses
Suitable for chipboard screws only.
PD 8 0321008 8mm 6mm+ 4.0mm 40mm 100 18.35
PD 10 0321010 10mm 7mm+ 5.0mm 40mm 100 22.85
PD 12 0321012 12mm 9mm+ 6.0mm 40mm 100 26.95
TP12 0330012 - 10-16mm 8g 35mm 100 13.95
TP12 PLUS 0330110 - 10-13mm 8g 45mm 100 45.50
QM 28 0332028 - 10mm+ 6-10g 11⁄4 100 14.50
PRODUCT MF DRILL BOARD SCREW MIN. BOX PRICE CODE CODE SIZE THICKNESS DIA. LGTH QTY. PER 100x
FISCHER TYPE UX-R
13mm 0317013 8mm 13-16mm 8-12g 2” 100 15.30
POLYTOGGLE • Medium duty plasterboard fixing. stays in place even when screw is removed
6 x 35 0313335 6mm 10-16mm 8g 2” 100 7.55
8 x 50 0313450 8 10-20 10 21⁄2 50 10.38
10 x 60 0313560 10 16-30 12 3” 25 20.32
• Ideal for use as a plasterboard fixing as well as lightweight and perforated blocks• For use with woodscrews
SPIT DRIVA PLUS • Heavy duty plasterboard fixing which is installed in the same way as the Driva, but has the advantage of a toggle for more substantial loads
FISCHER TYPE PD
QWIKMASTER • Expansion plug for plasterboard of any thickness. Made from tough glass filled nylon. For use with 6-10g woodscrews. Use Pozi Screwdrivers to punch hole in board first then drive Qwikmaster home
METAL DRIVA • Self drilling plasterboard fixing. Installed with a No.2 pozidriver • Comes complete with a 35mm Pan Head Screw
• High load capacity cavity fixing which is fast and easy to install in plasterboard and other board materials• Extra short expansion zone means PD can be installed with only the smallest cavity behind the board• Accommodates double board thicknesses
Suitable for chipboard screws only.
PD 8 0321008 8mm 6mm+ 4.0mm 40mm 100
PD 10 0321010 10mm 7mm+ 5.0mm 40mm 100
PD 12 0321012 12mm 9mm+ 6.0mm 40mm 100
TP12 0330012 - 10-16mm 8g 35mm 100
TP12 PLUS 0330110 - 10-13mm 8g 45mm 100
QM 28 0332028 - 10mm+ 6-10g 11⁄1⁄1 4⁄4⁄ 100
PRODUCT MF DRILL BOARD SCREW MIN. BOX PRICE CODE CODE SIZE THICKNESS DIA. LGTH QTY. PER 100x PRODUCT MF DRILL BOARD SCREW MIN. BOX PRICEx PRODUCT MF DRILL BOARD SCREW MIN. BOX PRICE CODE CODE SIZE THICKNESS DIA. x CODE CODE SIZE THICKNESS DIA.