7/16/2019 Rintoyo (Tugas B. Indonesia Jurnal) http://slidepdf.com/reader/full/rintoyo-tugas-b-indonesia-jurnal 1/12 Pembuatan Sistem Gedung Parkir Pintar Berbasis Programmable Logic Control dengan Sistem Monitoring Wonderware Intouch (Dimas Pradika) 43 PEMBUATAN SISTEM GEDUNG PARKIR PINTAR BERBASIS PROGRAMMABLE LOGIC CONTROL DENGAN SISTEM MONITORING WONDERWARE INTOUCH Dimas Pradika Alumni Universitas Negeri Jakarta Program Studi Pendidikan Teknik Elektro 2013 (098) Syufrijal Dosen Universitas Negeri Jakarta Program Studi Pendidikan Teknik Elektro Readysal Monantun Dosen Universitas Negeri Jakarta Program Studi Pendidikan Teknik Elektro Rintoyo Mahasiswa Universitas Negeri Jakarta Program Studi Pendidikan Teknik Elektro 5115111673 Abstract This research aims to design and create more load current protection system is equipped with automatic reverse function of the cover using a PLC (Programmable Logic Controller) and microcontroller ATMega 8535 as well as monitoring systems Visual Basic. The study was conducted in the laboratory of the State University of Jakarta PLC in September-December 2012 laboratoriuma using experimental methods, the results of studies such as the control panel for overload current protection system. This study discusses current overload protection circuit that can automatically shut behind which is used to detect overcurrent which is then read by the current sensor and converted into an analog voltage. After the conversion process, will be processed by a microcontroller ATMega 8535 to the current display on the LCD and Visual Basic programs. Program the microcontroller is designed as the controller relay to give input on a PLC that is controlling the system. PLC ladder program is designed in such a way as controlling relays to break and close back automatically with a delay and after passing the limit specified current rating. Then for reopening can be reset via the ON or ON command in Visual Basic. In this research, programs in Visual Basic can also be used to control the PLC. Based on the results, a combination of PLC, microcontroller, and Visual Basic in overload current protection system provides results that can be applied as a PLC automatic control circuit, analog microcontroller can process data generated by the ACS712-20A current sensor will be displayed on the LCD and programs Visual Basic, and Visual Basic program can work well in monitoring the entire system.Keywords: PLC, Sensor Infrared and Wonderware InTouch PROGRAMMABLE LOGIC CONTROLLER (PLC) Programmable logic controller (PLC) merupakan suatu bentuk khusus pengontrol berbasis mikroprosesor yang memanfaatkan memori yang dapat diprogram untuk menyimpan instruksi-instruksi dan untuk mengimplementasikan fungsi-fungsi semisal logika, sequencing, pewaktuan (timing), pencacahan (counting) dan aritmatika guna mengontrol mesin (William Bolton: 2004). Yang dirancang untuk dioperasikan oleh para teknisi yang memiliki pengetahuan tentang komputer dan bahasa pemrograman. PLC memiliki keunggulan yang signifikan, karena sebuah perangkat pengontrol yang sama dapat dipergunakan di dalam beraneka ragam sistem kontrol. Untuk memodifikasi sebuah sistem kontrol dan aturan-aturan pengontrolan yang dijalankannya, yang harus dilakukan oleh seorang operator hanyalah memasukkan seperangkat instruksi yang berbeda dari yang digunakan sebelumnya. Hasilnya adalah sebuah perangkat yang
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Pembuatan Sistem Gedung Parkir Pintar Berbasis Programmable Logic Control dengan SistemMonitoring Wonderware Intouch (Dimas Pradika) 43
PEMBUATAN SISTEM GEDUNG PARKIR PINTAR BERBASIS PROGRAMMABLE
LOGIC CONTROL DENGAN SISTEM MONITORING WONDERWARE INTOUCH
Dimas Pradika
Alumni Universitas Negeri Jakarta Program Studi Pendidikan Teknik Elektro 2013 (098)
SyufrijalDosen Universitas Negeri Jakarta Program Studi Pendidikan Teknik Elektro
Readysal Monantun
Dosen Universitas Negeri Jakarta Program Studi Pendidikan Teknik Elektro
Rintoyo
Mahasiswa Universitas Negeri Jakarta Program Studi Pendidikan Teknik Elektro
5115111673
Abstract
This research aims to design and create more load current protection system is equipped with automatic reverse
function of the cover using a PLC (Programmable Logic Controller) and microcontroller ATMega 8535 as wellas monitoring systems Visual Basic. The study was conducted in the laboratory of the State University of JakartaPLC in September-December 2012 laboratoriuma using experimental methods, the results of studies such as thecontrol panel for overload current protection system.
This study discusses current overload protection circuit that can automatically shut behind which is used todetect overcurrent which is then read by the current sensor and converted into an analog voltage. After theconversion process, will be processed by a microcontroller ATMega 8535 to the current display on the LCD and Visual Basic programs. Program the microcontroller is designed as the controller relay to give input on a PLC
that is controlling the system. PLC ladder program is designed in such a way as controlling relays to break and close back automatically with a delay and after passing the limit specified current rating. Then for reopening can be reset via the ON or ON command in Visual Basic. In this research, programs in Visual Basic can also be used
to control the PLC.
Based on the results, a combination of PLC, microcontroller, and Visual Basic in overload current protectionsystem provides results that can be applied as a PLC automatic control circuit, analog microcontroller can process data generated by the ACS712-20A current sensor will be displayed on the LCD and programs VisualBasic, and Visual Basic program can work well in monitoring the entire system.
Keywords: PLC, Sensor Infrared and Wonderware InTouch
PROGRAMMABLE LOGIC
CONTROLLER (PLC)
Programmable logic controller (PLC)
merupakan suatu bentuk khusus pengontrol
berbasis mikroprosesor yang memanfaatkan
memori yang dapat diprogram untuk
menyimpan instruksi-instruksi dan untuk
mengimplementasikan fungsi-fungsi semisal
logika, sequencing, pewaktuan (timing),
pencacahan (counting) dan aritmatika guna
mengontrol mesin (William Bolton: 2004).Yang dirancang untuk dioperasikan oleh para
teknisi yang memiliki pengetahuan tentang
komputer dan bahasa pemrograman.
PLC memiliki keunggulan yang signifikan,
karena sebuah perangkat pengontrol yang
sama dapat dipergunakan di dalam beraneka
ragam sistem kontrol. Untuk memodifikasi
sebuah sistem kontrol dan aturan-aturan
pengontrolan yang dijalankannya, yang harus
dilakukan oleh seorang operator hanyalah
memasukkan seperangkat instruksi yang
berbeda dari yang digunakan sebelumnya.Hasilnya adalah sebuah perangkat yang