Top Banner
RESL CUSTOMER EXPORT CONTROL AGREEMENT It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to conduct business in accordance with all applicable U.S. export control laws and regulations. It is also RESL’s policy that its Customers comply with U.S. export control laws and regulations. Therefore, Customer agrees to the following: 1. Because products, technical data, and technical assistance (i.e., services) provided to Customer by RESL may be subject to U.S. export control laws and regulations, (i) transactions with certain persons and companies and (ii) the export or reexport of certain types and levels of products, technical data, and services are prohibited or restricted. 2. Customer acknowledges that it is responsible for its own compliance with U.S. export control laws and regulations. Customer further agrees that it assumes the responsibility to obtain all necessary U.S. export licenses or other U.S. governmental authorizations, as well as all liability for the failure to do so. 3. Customer acknowledges that export control requirements may change and that the export or reexport of RESL products, technical data, and services without an export license or other appropriate governmental authorization may result in criminal and/or civil liability. 4. The obligations and requirements described herein shall survive the expiration or termination of any agreement or contract between RESL and Customer.
94

RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

Jun 29, 2020

Download

Documents

dariahiddleston
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

RESL CUSTOMER EXPORT CONTROL AGREEMENT It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to conduct business in accordance with all applicable U.S. export control laws and regulations. It is also RESL’s policy that its Customers comply with U.S. export control laws and regulations. Therefore, Customer agrees to the following: 1. Because products, technical data, and technical assistance (i.e., services) provided to

Customer by RESL may be subject to U.S. export control laws and regulations, (i) transactions with certain persons and companies and (ii) the export or reexport of certain types and levels of products, technical data, and services are prohibited or restricted.

2. Customer acknowledges that it is responsible for its own compliance with U.S. export control laws and regulations. Customer further agrees that it assumes the responsibility to obtain all necessary U.S. export licenses or other U.S. governmental authorizations, as well as all liability for the failure to do so.

3. Customer acknowledges that export control requirements may change and that the export or

reexport of RESL products, technical data, and services without an export license or other appropriate governmental authorization may result in criminal and/or civil liability.

4. The obligations and requirements described herein shall survive the expiration or termination

of any agreement or contract between RESL and Customer.

Page 2: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

GrW31 Participating LaboratoriesLab Code Lab Name Matrix CodeADEM01 Alabama Department of Environmental Management GrWADFC99 Abu Dhabi Quality and Conformity Council-Central Testing Lab GrWAFOH01 USAFSAM/OEA GrWANTE01 ALS Environmental - Fort Collins, CO GrWARPL01 Analytical Support Operations - Radiochemical Processing Lab GrWARSL01 ARS International, LLC GrWASUK99 NAS Radiochemistry Group GrWAY1201 Consolidated Nuclear Security, LLC, Analytical Chemistry Organization Laboratory GrWCDHS01 California Department of Public Health GrWCESL01 Lawrence Livermore National Laboratory - EMRL GrWCHMH01 222-S Laboratory GrWCMRC01 Carlsbad Environmental Monitoring and Research Center GrWCRCE99 Centre for Radiation, Chemical and Environmental Hazards GrWDEHS01 Department of Environmental Health & Safety GrWDPHE01 Colorado Dept. of Public Health & Env. / Laboratory Services Div. GrWDRMG01 CNS Pantex - D&RMG GrWELCS01 Energy Labs - College Station GrWELIW01 Energy Laboratories, Inc. GrWERCL01 Washington State Public Health Laboratories GrWERHD99 Radiation Protection Bureau RSD NMS GrWESGL99 Environmental Scientifics Group GrWFDHE01 Florida Dept of Health Environmental Laboratory GrWGENE01 GEL Laboratories, LLC GrWHCAL01 Hazards Control Analytical Lab GrWHECR01 SC Dept. Health and Environmental Control Radiological Laboratory GrWHPAC99 PHE, CRCE Scotland GrWISUE01 ISU Environmental Monitoring Laboratory GrWISUP01 ISU - Department of Physics/Health Physics/EAL GrWJAEC99 Research Laboratories and Information Directorate GrWKDHE01 Kansas Dept. of Health & Environment GrWLAWR01 LAWRENCE BERKELEY NATIONAL LABORATORY GrWLGCL99 LGC Ltd GrWLOCK03 Advanced Test Reactor (ATR) Complex Radioanalytical Laboratory GrWLZCA01 ACZ Laboratories, Inc GrWMAHP59 Materials Assessment and Health Physics Group GrWMALA99 Asia Lab (M) Sdn. Bhd. GrWMART01 Fluor B&W Ports Analytical Laboratory GrWMART03 Radioactive Material Analysis Laboratory GrWMDPH01 MDPH-Radiation Control Program GrWNARL01 National Air and Radiation Environmental Laboratory GrWNESI01 B&W Technical Services-Radioisotope & Analytical Chemistry Laboratory GrWNJDH01 New Jersey Dept. of Health, PHEL, ECLS GrWNOCS99 National Oceanography Centre, Southampton GrWNRLL99 Environmental Radioactivity - National Centre for Radiation Science GrWODHL01 Ohio Department of Health Laboratory GrWORIS01 ORISE/IEAV GrWOTLI01 Outreach Technologies, Inc. GrWQUAN01 TestAmerica St. Louis GrWQUAN03 TestAmerica Laboratories - Richland GrWRAVR99 Radiactividad Ambiental y Vigilancia Radiologica GrWRPSC01 Radiation Protection Service GrWSANC99 RadioAnalysis, South Africa Nuclear Energy Corp. GrWSEML01 SRS Environmental Monitoring Laboratory GrWSNRC99 Soreq NRC GrWSOUT01 Southwest Research Institute GrWTDHL01 Texas Department of State Health Services Laboratory GrW

Page 3: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

TELE02 ATI Environmental, Inc., Midwest Lab GrWTMAO01 EBERLINE SERVICES OAK RIDGE LABORATORY GrWTNUT01 St. Louis USACE FUSRAP Laboratory GrWULFM99 University of La Laguna FISICA Medica GrWUPVL99 Lab Radiactividad Ambiental. Univ. Politecnica Valencia GrWUSED99 National Center for Nuclear Energy, Sciences and Techniques GrWWEST04 PACE ANALYTICAL SERVICES, PITTSBURGH GrWWSHL01 Wisconsin State Laboratory of Hygiene GrWWVDP01 WVDP Environmental Laboratory GrW

Page 4: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

Laboratories Not Reporting GrW31Lab Code Lab Name Matrix CodeAREV01 AREVA - CMC GrWARGO01 Idaho National Laboratory GrWCEEA99 Laboratorio de Vigilancia Ambiental Radiactiva GrWEPAL01 U.S. EPA ORIA/NCRFO GrWLAEC99 Lebanese Atomic Energy Commission - Environmental Radiation GrWMART02 United States Enrichment Corporation GrWRMCL99 Royal Scientific Society - Radiation Protection Lab GrW

Page 5: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

Study Reference ValuesMAPEP-14-GrW31 Radiological Reference Date: 08/01/2014

Analyte RefValue

RefUnc

Radiological Units:(Bq/L)

Gross alpha 1.40 0.02Gross beta 6.50 0.19

Printed 12/08/2014

Page 6: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

Sample Statistical SummaryMAPEP-14-GrW31 Radiological Reference Date: 08/01/2014

Analyte T(1) A(2) Grand(3)Mean

StdDev

RefValue

RefUnc

AcceptanceRange

Radiological Units: (Bq/L)Gross alpha 65 63 1.15 0.35 1.40 0.02 0.42 - 2.38 Gross beta 65 63 6.67 0.90 6.50 0.19 3.25 - 9.75

Note: (1) T = Total number of laboratories reporting analyte.(2) A = Number of laboratories with 'Acceptable' performance.(3) Mean excludes values derived as total metals and values indicated as "Not Acceptable".

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations(Result/Uncertainty > 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, does not include zero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standarddeviations (Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty attwo standard deviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations(Result/Uncertainty > 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, does not include zero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standarddeviations (Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty attwo standard deviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 12/08/2014

Page 7: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

Flag Summary ReportMAPEP-14-GrW31

Radiological

Analyte A W RW NGross alpha 63 2Gross beta 63 2

Printed 12/10/2014

Page 8: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(ADEM01) Alabama Department of Environmental ManagementMontgomery LaboratoryMontgomery, AL 36110

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.01A -1.10Gross alpha -21.41.40 0.42 2.38 N0.01A -9.12Gross beta 40.36.50 3.25 9.75 N

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 9: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(ADFC99) Abu Dhabi Quality and Conformity Council-Central Testing LabRadiation LabAbu Dhabi, - -

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.39A -1.46Gross alpha 4.31.40 0.42 2.38 W0.36A -6.17Gross beta -5.16.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 10: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(AFOH01) USAFSAM/OEA2510 Fifth Street, Area BWright-Patterson AFB, OH 45433-7913

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.16A -1.36Gross alpha -2.91.40 0.42 2.38 A0.17A -6.20Gross beta -4.66.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 11: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(ANTE01) ALS Environmental - Fort Collins, CO225 Commerce DriveFort Collins, CO 80524-1416

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.11A -1.29Gross alpha -7.91.40 0.42 2.38 A0.52A -6.43Gross beta -1.16.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 12: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(ARPL01) Analytical Support Operations - Radiochemical Processing LabPO Box 999Richland, WA 99354

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.13A -1.36Gross alpha -2.91.40 0.42 2.38 A0.23A -6.56Gross beta 0.96.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 13: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(ARSL01) ARS International, LLC2609 North River RoadPort Allen, LA 70767

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.287A -1.162Gross alpha -17.01.40 0.42 2.38 W1.456A -6.221Gross beta -4.36.50 3.25 9.75 W

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 14: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(ASUK99) NAS Radiochemistry GroupA38.1 AWE,Reading, Berkshire RG7 4PR

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.045N -0.356Gross alpha -74.61.40 0.42 2.38 A0.124A -7.471Gross beta 14.96.50 3.25 9.75 N

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 15: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(AY1201) Consolidated Nuclear Security, LLC, Analytical Chemistry Organization LaboratoryY12, NSC, Bldg. 9995, Rm 142Oak Ridge, TN 37831-8189

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.15A -1.06Gross alpha -24.31.40 0.42 2.38 A0.29A -6.62Gross beta 1.86.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 16: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(CDHS01) California Department of Public HealthDrinking Water & Radiation Lab.Richmond, CA 94804-6403

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.0993A -1.055Gross alpha -24.61.40 0.42 2.38 A0.122A -6.55Gross beta 0.86.50 3.25 9.75 N

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 17: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(CESL01) Lawrence Livermore National Laboratory - EMRL7000 East AvenueLivermore, CA 94551

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

6.90e-02A -5.00e-01Gross alpha -64.31.40 0.42 2.38 A3.06e-01A -7.38e+00Gross beta 13.56.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 18: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(CHMH01) 222-S LaboratoryP.O. Box 250, MS T6-10Richland, WA 99352

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.238A -1.90Gross alpha 35.71.40 0.42 2.38 A0.464A -6.57Gross beta 1.16.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 19: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(CMRC01) Carlsbad Environmental Monitoring and Research Center1400 University Dr.Carlsbad, NM 88220

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.0174A -0.4909Gross alpha -64.91.40 0.42 2.38 A0.084A -6.409Gross beta -1.46.50 3.25 9.75 N

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 20: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(CRCE99) Centre for Radiation, Chemical and Environmental HazardsPublic Health EnglandDidcot, OXON OX11 0RQ

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.05A -1.01Gross alpha -27.91.40 0.42 2.38 A0.38A -6.86Gross beta 5.56.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 21: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(DEHS01) Department of Environmental Health & SafetyNorth Carolina State Univ.Raleigh, NC 27695-8007

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.21A -1.25Gross alpha -10.71.40 0.42 2.38 W0.24A -5.66Gross beta -12.96.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 22: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(DPHE01) Colorado Dept. of Public Health & Env. / Laboratory Services Div.8100 Lowry BlvdDenver, CO 80230

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.18A -1.48Gross alpha 5.71.40 0.42 2.38 A0.3A -7.21Gross beta 10.96.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 23: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(DRMG01) CNS Pantex - D&RMGBldg 12-122Amarillo, TX 79120-0020

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

1.89E-01A -1.44E+00Gross alpha 2.91.40 0.42 2.38 A1.74E-01A -5.41E+00Gross beta -16.86.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 24: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(ELCS01) Energy Labs - College Station415 Graham RDCollege Station, Tx 77845

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.12A -1.18Gross alpha -15.71.40 0.42 2.38 A0.42A -6.36Gross beta -2.26.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 25: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(ELIW01) Energy Laboratories, Inc.2393 Salt Creek HWYCasper, Wy 82601

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.06A -0.7Gross alpha -50.01.40 0.42 2.38 A0.1A -6.3Gross beta -3.16.50 3.25 9.75 N

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 26: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(ERCL01) Washington State Public Health Laboratories1610 N.E. 150th StreetShoreline, WA 98155-9701

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.22A -1.41Gross alpha 0.71.40 0.42 2.38 W0.34A -5.99Gross beta -7.86.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 27: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(ERHD99) Radiation Protection Bureau RSD NMS775 Brookfield Road AL6302D1Ottawa, Ontario K1A 1C1

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.423A -1.21Gross alpha -13.61.40 0.42 2.38 N0.48A -6.83Gross beta 5.16.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 28: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(ESGL99) Environmental Scientifics GroupUnit 12 MoorbrookDIdcot, Oxfordshire OX11 8QT

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.093A -0.979Gross alpha -30.11.40 0.42 2.38 A0.61A -8.27Gross beta 27.26.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 29: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(FDHE01) Florida Dept of Health Environmental LaboratoryPO Box 680069Orlando, FL 32868-0069

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.166A -1.575Gross alpha 12.51.40 0.42 2.38 A0.163A -6.861Gross beta 5.66.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 30: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(GENE01) GEL Laboratories, LLC2040 Savage RoadCharleston, SC 29407

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.109A -1.03Gross alpha -26.41.40 0.42 2.38 A0.582A -6.98Gross beta 7.46.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 31: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(HCAL01) Hazards Control Analytical LabLawrence Livermore NationalLivermore, CA 94551

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

.09A -.80Gross alpha -42.91.40 0.42 2.38 A

.31A -5.9Gross beta -9.26.50 3.25 9.75 ARadiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 32: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(HECR01) SC Dept. Health and Environmental Control Radiological Laboratory8231 Parklane RoadColumbia, SC 29223

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.27A -1.14Gross alpha -18.61.40 0.42 2.38 W0.24A -6.06Gross beta -6.86.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 33: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(HPAC99) PHE, CRCE Scotland155 Hardgate RoadGlasgow, Scotland G514LS

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.065A -0.524Gross alpha -62.61.40 0.42 2.38 A0.30A -5.05Gross beta -22.36.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 34: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(ISUE01) ISU Environmental Monitoring Laboratory785 5th 8th Ave Rm B107Pocatello, Idaho 83209

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

.07A -.79Gross alpha -43.61.40 0.42 2.38 A

.09A -8.12Gross beta 24.96.50 3.25 9.75 NRadiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 35: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(ISUP01) ISU - Department of Physics/Health Physics/EAL785 S. 8th Ave, Rm 120Pocatello, ID 83209-8106

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.141A -1.867Gross alpha 33.41.40 0.42 2.38 A0.015A -6.796Gross beta 4.66.50 3.25 9.75 N

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 36: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(JAEC99) Research Laboratories and Information DirectorateJordan Atomic Energy CommissionAmman, Jordan 70 (11934)

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.338A -1.540Gross alpha 10.01.40 0.42 2.38 W1.768A -7.637Gross beta 17.56.50 3.25 9.75 W

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 37: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(KDHE01) Kansas Dept. of Health & Environment6810 SE Dwight StreetTopeka, KS 66620

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.15A -1.60Gross alpha 14.31.40 0.42 2.38 A0.33A -9.07Gross beta 39.56.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 38: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(LAWR01) LAWRENCE BERKELEY NATIONAL LABORATORY1 CYCLOTRON RD.BERKELEY, CA 94720

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

.191A -.727Gross alpha -48.11.40 0.42 2.38 W

.153A -6.38Gross beta -1.86.50 3.25 9.75 ARadiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 39: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(LGCL99) LGC LtdQueens RoadTeddington, Middlesex TW11 0LY

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.142A -0.992Gross alpha -29.11.40 0.42 2.38 A0.49A -6.17Gross beta -5.16.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 40: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(LOCK03) Advanced Test Reactor (ATR) Complex Radioanalytical LaboratoryINL/Battelle Energy Alliance, LLCIdaho Falls, ID 83415-7111

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

1.04e-01A -8.38e-01Gross alpha -40.11.40 0.42 2.38 A3.88E-01A -7.81E+00Gross beta 20.26.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 41: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(LZCA01) ACZ Laboratories, Inc2273 Downhill DriveSteamboat Springs, CO 80487

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.184A -0.683Gross alpha -51.21.40 0.42 2.38 W0.33A -6.98Gross beta 7.46.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 42: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(MAHP59) Materials Assessment and Health Physics GroupImperial College Reactor CentreAscot, Berkshire SL5 7TE

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.15N --0.06Gross alpha -104.31.40 0.42 2.38 N0.35A -7.68Gross beta 18.26.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 43: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(MALA99) Asia Lab (M) Sdn. Bhd.No. 14, JLN USJ 1/1Subang Jaya, Selangor 47600

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.28A -0.56Gross alpha -60.01.40 0.42 2.38 N0.09N -0.82Gross beta -87.46.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 44: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(MART01) Fluor B&W Ports Analytical LaboratoryLab COC, Bldg. X-710, Rm 222Piketon, OH 45661-

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.1278A -1.01Gross alpha -27.91.40 0.42 2.38 A0.2479A -6.88Gross beta 5.86.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 45: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(MART03) Radioactive Material Analysis LaboratoryORNLOak Ridge, TN 37831-6223

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.13A -1.19Gross alpha -15.01.40 0.42 2.38 A0.23A -6.96Gross beta 7.16.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 46: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(MDPH01) MDPH-Radiation Control ProgramMERL-Room 002Jamaica Plain, MA 02130-3597

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.08A -0.70Gross alpha -50.01.40 0.42 2.38 A0.52A -8.63Gross beta 32.86.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 47: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(NARL01) National Air and Radiation Environmental Laboratory540 S. Morris Ave.Montgomery, AL 36115-2601

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.237A -1.59Gross alpha 13.61.40 0.42 2.38 A0.387A -6.81Gross beta 4.86.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 48: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(NESI01) B&W Technical Services-Radioisotope & Analytical Chemistry LaboratoryLynchburg Technology CenterLynchburg, VA 24504-5447

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.08A -1.14Gross alpha -18.61.40 0.42 2.38 A0.13A -5.73Gross beta -11.86.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 49: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(NJDH01) New Jersey Dept. of Health, PHEL, ECLS3 Schwarzkopf DriveWest Trenton, NJ 08628

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.02A -1.52Gross alpha 8.61.40 0.42 2.38 N0.01A -7.60Gross beta 16.96.50 3.25 9.75 N

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 50: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(NOCS99) National Oceanography Centre, SouthamptonGAU-RadioanalyticalSouthampton, Hampshire SO14 3ZH

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.11A -0.89Gross alpha -36.41.40 0.42 2.38 A1.03A -7.92Gross beta 21.86.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 51: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(NRLL99) Environmental Radioactivity - National Centre for Radiation SciencePO Box 25099Christchurch, Christchurch 8144

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.039A -1.303Gross alpha -6.91.40 0.42 2.38 A0.17A -6.32Gross beta -2.86.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 52: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(ODHL01) Ohio Department of Health Laboratory8995 E Main StreetReynoldsburg, OH 43068

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.274A -1.554Gross alpha 11.01.40 0.42 2.38 W0.492A -6.760Gross beta 4.06.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 53: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(ORIS01) ORISE/IEAVPO Box 117Oak Ridge, TN 37831-0117

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.057A -1.283Gross alpha -8.41.40 0.42 2.38 A0.081A -6.707Gross beta 3.26.50 3.25 9.75 N

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 54: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(OTLI01) Outreach Technologies, Inc.311 N. AspenBroken Arrow, OK 74012-

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.195A -1.37Gross alpha -2.11.40 0.42 2.38 A0.062A -6.48Gross beta -0.36.50 3.25 9.75 N

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 55: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(QUAN01) TestAmerica St. Louis13715 Rider Trail NorthEarth City, MO 63045-1205

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.0805A -0.812Gross alpha -42.01.40 0.42 2.38 A0.307A -5.89Gross beta -9.46.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 56: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(QUAN03) TestAmerica Laboratories - Richland2800 GEORGE WASHINGTON WAYRICHLAND, WA 99354-

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.131A -0.944Gross alpha -32.61.40 0.42 2.38 A0.428A -6.42Gross beta -1.26.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 57: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(RAVR99) Radiactividad Ambiental y Vigilancia RadiologicaCIEMAT (Ed 70 P2 D11)Madrid, Madrid 28040

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.065A -1.031Gross alpha -26.41.40 0.42 2.38 A0.59A -5.91Gross beta -9.16.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 58: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(RPSC01) Radiation Protection ServiceOntario Ministry of LabourWeston, Ontario M9P 3T1

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.15A -0.73Gross alpha -47.91.40 0.42 2.38 W0.37A -3.74Gross beta -42.56.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 59: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(SANC99) RadioAnalysis, South Africa Nuclear Energy Corp.Sample Receipt Gate 1Pretoria, Gauteng 0001

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.165A -0.817Gross alpha -41.61.40 0.42 2.38 W0.33A -6.02Gross beta -7.46.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 60: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(SEML01) SRS Environmental Monitoring LaboratoryBldg 735-BAiken, SC 29808

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.20A -1.20Gross alpha -14.31.40 0.42 2.38 W0.36A -6.72Gross beta 3.46.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 61: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(SNRC99) Soreq NRCRadioactivity Measurement SectionYavne, Israel 81800

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.22A -1.24Gross alpha -11.41.40 0.42 2.38 W0.39A -6.37Gross beta -2.06.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 62: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(SOUT01) Southwest Research Institute6220 Culebra Rd.San Antonio, TX 78228-0510

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.0904A -1.22Gross alpha -12.91.40 0.42 2.38 A0.385A -6.41Gross beta -1.46.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 63: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(TDHL01) Texas Department of State Health Services Laboratory1100 W 49th StreetAustin, TX 78756

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.058A -1.156Gross alpha -17.41.40 0.42 2.38 A0.12A -6.42Gross beta -1.26.50 3.25 9.75 N

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 64: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(TELE02) ATI Environmental, Inc., Midwest Lab700 Landwehr RoadNorthbrook, IL 60062-

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.07A -0.93Gross alpha -33.61.40 0.42 2.38 A1.35A -6.31Gross beta -2.96.50 3.25 9.75 W

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 65: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(TMAO01) EBERLINE SERVICES OAK RIDGE LABORATORY601 SCARBORO RDOAK RIDGE, TN 37830-

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.296A -1.544Gross alpha 10.31.40 0.42 2.38 W0.323A -7.102Gross beta 9.36.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 66: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(TNUT01) St. Louis USACE FUSRAP Laboratory8945 LATTY AVEBERKELEY, MO 63134-

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

.2737A -1.5450Gross alpha 10.41.40 0.42 2.38 W

.6338A -5.6161Gross beta -13.66.50 3.25 9.75 ARadiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 67: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(ULFM99) University of La Laguna FISICA MedicaFaculty of Medicine -Univ. of La LagunaTenerife, Canary Islands 38296

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.07A -1.02Gross alpha -27.11.40 0.42 2.38 A0.13A -6.10Gross beta -6.26.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 68: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(UPVL99) Lab Radiactividad Ambiental. Univ. Politecnica ValenciaCAMINO DE VERA, 14VALENCIA, VALENCIA 46022

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.06A -1.08Gross alpha -22.91.40 0.42 2.38 A0.3A -6.3Gross beta -3.16.50 3.25 9.75 A

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 69: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(USED99) National Center for Nuclear Energy, Sciences and TechniquesCNESTEN BP 1382RABAT, RABAT RP 10001

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

1A -1Gross alpha -28.61.40 0.42 2.38 N1N -1Gross beta -84.66.50 3.25 9.75 N

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 70: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(WEST04) PACE ANALYTICAL SERVICES, PITTSBURGH1638 Roseytown RoadGreensburg, PA 15601

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.213A -1.073Gross alpha -23.41.40 0.42 2.38 W1.06A -5.92Gross beta -8.96.50 3.25 9.75 W

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 71: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(WSHL01) Wisconsin State Laboratory of Hygiene2601 Agriculture DriveMadison, WI 53718

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

0.063A -1.45Gross alpha 3.61.40 0.42 2.38 A0.077A -6.78Gross beta 4.36.50 3.25 9.75 N

Radiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 72: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

MAPEP-14-GrW31 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-14-GrW31(WVDP01) WVDP Environmental Laboratory10282 Rock Springs RoadWest Valley, NY 14171

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/L)Radiological

.271A -2.06Gross alpha 47.11.40 0.42 2.38 A

.280A -7.09Gross beta 9.16.50 3.25 9.75 ARadiological Reference Date: August 1, 2014

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

1) NOT ACCEPTABLE...........................RP<2%

2) ACCEPTABLE..................................2%<=RP<=15%

3) ACCEPTABLE WITH WARNING...........15%<RP<=30%

4) NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

 

Printed 12/8/2014Issued 11/20/2014

Page 73: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

Gross alpha

MAPEP-14-GrW31

Ref. Value 1.40 Mean 1.15 Acc. Range

Note: This chart shows only data points with values between -0.58 and 2.88 (±5 Standard Deviations)

Page 74: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

Gross beta

MAPEP-14-GrW31

Ref. Value 6.50 Mean 6.67 Acc. Range

Note: This chart shows only data points with values between 2.17 and 11.16 (±5 Standard Deviations)

Page 75: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

The intent of the distribution graphs contained within this report is to graphically demonstrate to users how % Bias data within the current MAPEP Series appears when examined by matrix, by analyte, by method of sample preparation or by method of detection. The data points (small 'dots') plot the bias (or z-score for organic constituents) of each of the analytes in each of the matrices. The BLACK small vertical line inside the small rectangle at the top of the data distribution graph is the mean of the population of the bias shown for that analyte in the matrix.

The box plots summarize the distribution of points for each analyte. The ends of the box are the 25th and 75th quantiles. The difference between the quartiles is the interquartile range. The line across the middle of the box identifies the median bias value. Each box has lines, sometimes called whiskers, which extend from each end. The whiskers extend from the ends of the small box to the outermost data point that falls within the distances computed. Any potential outliers are represented as small black dots.

The box plot of the bias data points and the mean visually illustrate the breadth of the distribution and where any potential outliers in the distribution might lie. The moments for the distribution plot are provided below the Bias plot. In some cases, N becomes very small and thus developed statistics may not accurately reflect estimates of the population if N were a significantly larger value.

Possible Outliers Mean Confidence Diamond

25th Percentile 75th Percentile Interquartile Range

Page 76: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

*U:�'LVWULEXWLRQ�E\�'HWHFWLRQ�0HWKRG

���

���

���

���

���

���

���

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

�������������������������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

����������

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB'HWHFWLRQ *URVVDOSKD��$OSKD�6SHFWURPHWU\

*U:�'LVWULEXWLRQ�E\�'HWHFWLRQ�0HWKRG

Page 77: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

*U:�'LVWULEXWLRQ�E\�'HWHFWLRQ�0HWKRG

���

���

���

���

���

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

������������

������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

���������������������������������������������

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB'HWHFWLRQ *URVV�DOSKD%HWD�&RXQWLQJ�����SL�JDV�IORZ�SURSRUWLRQDO�FRXQWHU

*U:�'LVWULEXWLRQ�E\�'HWHFWLRQ�0HWKRG

Page 78: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

*U:�'LVWULEXWLRQ�E\�'HWHFWLRQ�0HWKRG

���

���

���

���

���

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

��������������������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

��������������

����������������������

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB'HWHFWLRQ *URVV�DOSKD%HWD�&RXQWLQJ���OLTXLG�VFLQWLOODWLRQ�FRXQWHU

*U:�'LVWULEXWLRQ�E\�'HWHFWLRQ�0HWKRG

Page 79: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

*U:�'LVWULEXWLRQ�E\�'HWHFWLRQ�0HWKRG

���

���

���

���

��

��

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

��������������������������������

��������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

���������������������������������������������

��

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB'HWHFWLRQ *URVV�DOSKD��*URVV$OSKD�%HWD�����SL�JDV�IORZ�SURSRUWLRQDO�FRXQWHU

*U:�'LVWULEXWLRQ�E\�'HWHFWLRQ�0HWKRG

Page 80: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

*U:�'LVWULEXWLRQ�E\�'HWHFWLRQ�0HWKRG

���

���

���

���

���

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

�������������������������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

�������������������������������������������

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV$QDO\WHB'HWHFWLRQ *URVV�DOSKD��2WKHU

*U:�'LVWULEXWLRQ�E\�'HWHFWLRQ�0HWKRG

Page 81: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

*U:�'LVWULEXWLRQ�E\�'HWHFWLRQ�0HWKRG

��

��

��

��

��

��

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

��������������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

���������

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB'HWHFWLRQ *URVVEHWD��$OSKD�6SHFWURPHWU\

*U:�'LVWULEXWLRQ�E\�'HWHFWLRQ�0HWKRG

Page 82: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

*U:�'LVWULEXWLRQ�E\�'HWHFWLRQ�0HWKRG

���

��

��

��

��

��

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

��������������������������

�����������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

���������������������������������������������

��

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB'HWHFWLRQ *URVV�EHWD��%HWD&RXQWLQJ�����SL�JDV�IORZ�SURSRUWLRQDO�FRXQWHU

*U:�'LVWULEXWLRQ�E\�'HWHFWLRQ�0HWKRG

Page 83: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

*U:�'LVWULEXWLRQ�E\�'HWHFWLRQ�0HWKRG

��

��

��

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

�������������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

���������������������������������������������

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB'HWHFWLRQ *URVV�EHWD%HWD�&RXQWLQJ���OLTXLG�VFLQWLOODWLRQ�FRXQWHU

*U:�'LVWULEXWLRQ�E\�'HWHFWLRQ�0HWKRG

Page 84: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

*U:�'LVWULEXWLRQ�E\�'HWHFWLRQ�0HWKRG

����

���

���

���

��

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

�����������������������

�������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

���������������������������������������������

��

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB'HWHFWLRQ *URVV�EHWD��*URVV$OSKD�%HWD�����SL�JDV�IORZ�SURSRUWLRQDO�FRXQWHU

*U:�'LVWULEXWLRQ�E\�'HWHFWLRQ�0HWKRG

Page 85: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

*U:�'LVWULEXWLRQ�E\�3UHS�0HWKRG

���

���

���

���

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

��������������������������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

���������������

����������������������

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB0HWKRG *URVVDOSKD��&RSUHFLSLWDWLRQ��DFLGLILHG

*U:�'LVWULEXWLRQ�E\�3UHS�0HWKRG

Page 86: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

*U:�'LVWULEXWLRQ�E\�3UHS�0HWKRG

���

���

���

���

���

��

��

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

����������

�����������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

��������������������������������������������

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB0HWKRG *URVVDOSKD��&RSUHFLSLWDWLRQ��VWUDLJKW

*U:�'LVWULEXWLRQ�E\�3UHS�0HWKRG

Page 87: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

*U:�'LVWULEXWLRQ�E\�3UHS�0HWKRG

���

���

���

���

���

���

���

��

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

����������������������

�������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

���������������������������������������������

��

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB0HWKRG *URVV�DOSKD��(3$�����5DGLRDFWLYLW\��*URVV�$OSKD�%HWD�6FUHHQLQJ��������������

*U:�'LVWULEXWLRQ�E\�3UHS�0HWKRG

Page 88: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

*U:�'LVWULEXWLRQ�E\�3UHS�0HWKRG

���

���

��

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

��������������������

�������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

�������������������������������������������

��

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB0HWKRG *URVVDOSKD��(YDSRUDWLRQ��DFLGLILHG

*U:�'LVWULEXWLRQ�E\�3UHS�0HWKRG

Page 89: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

*U:�'LVWULEXWLRQ�E\�3UHS�0HWKRG

���

���

���

���

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

��������������������

����������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

�����������������������������������������

��

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB0HWKRG *URVVDOSKD��(YDSRUDWLRQ��VWUDLJKW

*U:�'LVWULEXWLRQ�E\�3UHS�0HWKRG

Page 90: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

*U:�'LVWULEXWLRQ�E\�3UHS�0HWKRG

���

���

���

���

���

���

���

���

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

���������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

��������

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB0HWKRG *URVV�DOSKD1R�SUHSDUDWLRQ���DQDO\]HG�DV�UHFHLYHG

*U:�'LVWULEXWLRQ�E\�3UHS�0HWKRG

Page 91: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

*U:�'LVWULEXWLRQ�E\�3UHS�0HWKRG

����

���

���

���

��

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

����������������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

���������������������������������������������

��

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB0HWKRG *URVV�EHWD��(3$�����5DGLRDFWLYLW\��*URVV�$OSKD�%HWD�6FUHHQLQJ��������������

*U:�'LVWULEXWLRQ�E\�3UHS�0HWKRG

Page 92: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

*U:�'LVWULEXWLRQ�E\�3UHS�0HWKRG

���

���

���

���

���

��

��

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

����������������������������

���������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

���������������������������������������������

��

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB0HWKRG *URVVEHWD��(YDSRUDWLRQ��DFLGLILHG

*U:�'LVWULEXWLRQ�E\�3UHS�0HWKRG

Page 93: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

*U:�'LVWULEXWLRQ�E\�3UHS�0HWKRG

����

���

���

���

��

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

���������������������������

���������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

��������������������������������������������

��

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB0HWKRG *URVVEHWD��(YDSRUDWLRQ��VWUDLJKW

*U:�'LVWULEXWLRQ�E\�3UHS�0HWKRG

Page 94: RESL CUSTOMER EXPORT CONTROL AGREEMENT · 2014-12-17 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to

*U:�'LVWULEXWLRQ�E\�3UHS�0HWKRG

����

����

����

����

����

����

����

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

��������������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

���������

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB0HWKRG *URVV�EHWD1R�SUHSDUDWLRQ���DQDO\]HG�DV�UHFHLYHG

*U:�'LVWULEXWLRQ�E\�3UHS�0HWKRG