RESL CUSTOMER EXPORT CONTROL AGREEMENT It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to conduct business in accordance with all applicable U.S. export control laws and regulations. It is also RESL’s policy that its Customers comply with U.S. export control laws and regulations. Therefore, Customer agrees to the following: 1. Because products, technical data, and technical assistance (i.e., services) provided to Customer by RESL may be subject to U.S. export control laws and regulations, (i) transactions with certain persons and companies and (ii) the export or reexport of certain types and levels of products, technical data, and services are prohibited or restricted. 2. Customer acknowledges that it is responsible for its own compliance with U.S. export control laws and regulations. Customer further agrees that it assumes the responsibility to obtain all necessary U.S. export licenses or other U.S. governmental authorizations, as well as all liability for the failure to do so. 3. Customer acknowledges that export control requirements may change and that the export or reexport of RESL products, technical data, and services without an export license or other appropriate governmental authorization may result in criminal and/or civil liability. 4. The obligations and requirements described herein shall survive the expiration or termination of any agreement or contract between RESL and Customer.
95
Embed
RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
RESL CUSTOMER EXPORT CONTROL AGREEMENT It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to conduct business in accordance with all applicable U.S. export control laws and regulations. It is also RESL’s policy that its Customers comply with U.S. export control laws and regulations. Therefore, Customer agrees to the following: 1. Because products, technical data, and technical assistance (i.e., services) provided to
Customer by RESL may be subject to U.S. export control laws and regulations, (i) transactions with certain persons and companies and (ii) the export or reexport of certain types and levels of products, technical data, and services are prohibited or restricted.
2. Customer acknowledges that it is responsible for its own compliance with U.S. export control laws and regulations. Customer further agrees that it assumes the responsibility to obtain all necessary U.S. export licenses or other U.S. governmental authorizations, as well as all liability for the failure to do so.
3. Customer acknowledges that export control requirements may change and that the export or
reexport of RESL products, technical data, and services without an export license or other appropriate governmental authorization may result in criminal and/or civil liability.
4. The obligations and requirements described herein shall survive the expiration or termination
of any agreement or contract between RESL and Customer.
GrF34 Participating LaboratoriesLab Code Lab Name Matrix CodeADEM01 Alabama Department of Environmental Management GrFADFC99 Abu Dhabi Quality and Conformity Council-Central Testing Lab GrFAFOH01 USAFSAM/OEA GrFANTE01 ALS Environmental - Fort Collins, CO GrFARGO01 Idaho National Laboratory GrFARPL01 Analytical Support Operations - Radiochemical Processing Lab GrFARSL01 ARS International, LLC GrFASUK99 NAS Radiochemistry Group GrFAY1201 Consolidated Nuclear Security, LLC, Analytical Chemistry Organization Lab GrFBY1201 Consolidated Nuclear Security, LLC, Analytical Chemistry Organization Lab GrFCESL01 Lawrence Livermore National Laboratory - EMRL GrFCHMH01 222-S Laboratory GrFCRCE99 Centre for Radiation, Chemical and Environmental Hazards GrFDEHS01 Department of Environmental Health & Safety GrFDPHE01 Colorado Dept. of Public Health & Env. / Laboratory Services Div. GrFDRMG01 CNS Pantex - D&RMG GrFELIW01 Energy Laboratories, Inc. GrFERCL01 Washington State Public Health Laboratories GrFEULC01 EnergySolutions, LLC GrFFDHE01 Florida Dept of Health Environmental Laboratory GrFFDOH01 Florida Dept. of Health, Mobile Environmental Radiological Lab GrFGENE01 GEL Laboratories, LLC GrFGPCL01 Georgia Power Company Environmental Laboratory GrFHCAL01 Lawrence Livermore National Laboratory GrFHECR01 SC Dept. Health and Environmental Control Radiological Laboratory GrFHERR01 Washington Closure Hanford GrFHPAL01 Los Alamos National Laboratory GrFISUP01 ISU - Department of Physics/Health Physics/EAL GrFJAEC99 Research Laboratories and Information Directorate GrFLAEC99 Lebanese Atomic Energy Commission - Environmental Radiation GrFLERL99 LARUEX Environmental Radioactivity Laboratory GrFLGCL99 LGC Ltd GrFLOCK03 Advanced Test Reactor (ATR) Complex Radioanalytical Laboratory GrFMAHP59 Materials Assessment and Health Physics Group GrFMALA99 Asia Lab (M) Sdn. Bhd. GrFMART03 Radioactive Material Analysis Laboratory GrFMDPH01 MDPH-Radiation Control Program GrFNARL01 National Analytical Radiation Environmental Laboratory GrFNESI01 B&W Technical Services-Radioisotope & Analytical Chemistry Laboratory GrFNOCS99 National Oceanography Centre, Southampton GrFNRLL99 Environmental Radioactivity - National Centre for Radiation Science GrFODHL01 Ohio Department of Health Laboratory GrFORIS01 ORISE/IEAV GrFOTLI01 Outreach Laboratory, a Division of ESC Lab Sciences GrFQUAN01 TestAmerica St. Louis GrF
QUAN03 TestAmerica Laboratories - Richland GrFRAVR99 Radiactividad Ambiental y Vigilancia Radiologica GrFRPSC01 Radiation Protection Service GrFRSAL01 RSA Laboratories, Inc. GrFSANC99 RadioAnalysis, South Africa Nuclear Energy Corp. GrFSEML01 SRS Environmental Monitoring Laboratory GrFSOUT01 Southwest Research Institute GrFSRPD01 Sandia National Laboratories, Radiation Protection Sample Diagnostics GrFTDHL01 Texas Department of State Health Services Laboratory GrFTELE01 TELEDYNE BROWN ENGINEERING - ENVIRONMENTAL SERVICES GrFTELE02 ATI Environmental, Inc., Midwest Lab GrFTMAO01 EBERLINE SERVICES OAK RIDGE LABORATORY GrFTNUT01 St. Louis USACE FUSRAP Laboratory GrFURSL01 UNLV Radioanalytical Services Laboratory GrFWEST04 PACE ANALYTICAL SERVICES, PITTSBURGH GrFWIPP01 WIPP Laboratories GrFWSHL01 Wisconsin State Laboratory of Hygiene GrFWSTP99 Cavendish Nuclear Limited GrFWVDP01 WVDP Environmental Laboratory GrFWVPL01 WVDP Radiation Protection Lab GrF
Laboratories Not Reporting GrF34Lab Code Lab Name Matrix CodeENEC99 Emirates Nuclear Energy Corp (ENEC) Environmental Radiochemistry Lab GrFKSCF01 Kennedy Space Center, HP Laboratory GrFNARL02 USEPA - NAREL - MERL GrFZIOS99 ZVD Institute of Occupational Safety GrF
Study Reference ValuesMAPEP-16-GrF34 Radiological Reference Date: 02/01/2016
Note: (1) T = Total number of laboratories reporting analyte.(2) A = Number of laboratories with 'Acceptable' performance.(3) Mean excludes values derived as total metals and values indicated as "Not Acceptable".
Gross Alpha Flags:
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations(Result/Uncertainty > 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, does not include zero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standarddeviations (Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty attwo standard deviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations(Result/Uncertainty > 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, does not include zero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standarddeviations (Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty attwo standard deviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415
Laboratory Results For MAPEP-16-GrF34(HCAL01) Lawrence Livermore National LaboratoryAnalytical Services and Instrumentation Analytical LabLivermore, CA 94550
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415
Laboratory Results For MAPEP-16-GrF34(LAEC99) Lebanese Atomic Energy Commission - Environmental RadiationNational Council for Scientific ResearchBeirut, Beirut 1107 2260
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415
Laboratory Results For MAPEP-16-GrF34(LOCK03) Advanced Test Reactor (ATR) Complex Radioanalytical LaboratoryINL/Battelle Energy Alliance, LLCIdaho Falls, ID 83415-7111
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415
Laboratory Results For MAPEP-16-GrF34(NRLL99) Environmental Radioactivity - National Centre for Radiation SciencePO Box 29181Christchurch, Christchurch 8540
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).
Gross Beta Flags:
A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).
N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).